kernel: bump 4.9 to 4.9.67

include/kernel-version.mk

@@ -4,11 +4,11 @@ LINUX_RELEASE?=1
 
 LINUX_VERSION-3.18 = .71
 LINUX_VERSION-4.4 = .100
-LINUX_VERSION-4.9 = .65
+LINUX_VERSION-4.9 = .67
 
 LINUX_KERNEL_HASH-3.18.71 = 5abc9778ad44ce02ed6c8ab52ece8a21c6d20d21f6ed8a19287b4a38a50c1240
 LINUX_KERNEL_HASH-4.4.100 = 9936cd99c4bd35f6bc6962c9acdd1fa2ac8999e07a9be6a94a03b5492f1bd14f
-LINUX_KERNEL_HASH-4.9.65 = 24ba70877549a3cf25dc5f12efd260d3e957bce64c087de98baf8968ee514895
+LINUX_KERNEL_HASH-4.9.67 = 7fbaa7dcc17877dfa0c96fb9a7d2f4ffed20ceeb13cbbeb18d77213c6cf75f7d
 
 ifdef KERNEL_PATCHVER
   LINUX_VERSION:=$(KERNEL_PATCHVER)$(strip $(LINUX_VERSION-$(KERNEL_PATCHVER)))

target/linux/ar71xx/patches-4.9/432-spi-rb4xx-spi-driver.patch

@@ -1,6 +1,6 @@
 --- a/drivers/spi/Kconfig
 +++ b/drivers/spi/Kconfig
-@@ -533,6 +533,12 @@ config SPI_QUP
+@@ -534,6 +534,12 @@ config SPI_QUP
  	  This driver can also be built as a module.  If so, the module
  	  will be called spi_qup.
  

target/linux/ar71xx/patches-4.9/433-spi-rb4xx-cpld-driver.patch

@@ -1,6 +1,6 @@
 --- a/drivers/spi/Kconfig
 +++ b/drivers/spi/Kconfig
-@@ -761,6 +761,13 @@ config SPI_TLE62X0
+@@ -762,6 +762,13 @@ config SPI_TLE62X0
  	  sysfs interface, with each line presented as a kind of GPIO
  	  exposing both switch control and diagnostic feedback.
  

target/linux/ar71xx/patches-4.9/435-spi-vsc7385_driver.patch

@@ -1,6 +1,6 @@
 --- a/drivers/spi/Kconfig
 +++ b/drivers/spi/Kconfig
-@@ -768,6 +768,11 @@ config SPI_RB4XX_CPLD
+@@ -769,6 +769,11 @@ config SPI_RB4XX_CPLD
  	  SPI driver for the Xilinx CPLD chip present on the
  	  MikroTik RB4xx boards.
  

target/linux/cns3xxx/patches-4.9/130-Extend-PCIE_BUS_PEER2PEER-to-set-MRSS-128-to-fix-CNS3xxx-BM-DMA..patch

@@ -1,6 +1,6 @@
 --- a/drivers/pci/probe.c
 +++ b/drivers/pci/probe.c
-@@ -2003,7 +2003,8 @@ static void pcie_write_mrrs(struct pci_d
+@@ -2014,7 +2014,8 @@ static void pcie_write_mrrs(struct pci_d
  	/* In the "safe" case, do not configure the MRRS.  There appear to be
  	 * issues with setting MRRS to 0 on a number of devices.
  	 */

target/linux/generic/hack-4.9/904-debloat_dma_buf.patch

@@ -54,7 +54,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
 +MODULE_LICENSE("GPL");
 --- a/kernel/sched/core.c
 +++ b/kernel/sched/core.c
-@@ -2171,6 +2171,7 @@ int wake_up_state(struct task_struct *p,
+@@ -2170,6 +2170,7 @@ int wake_up_state(struct task_struct *p,
  {
  	return try_to_wake_up(p, state, 0);
  }

target/linux/generic/pending-4.9/190-2-5-e1000e-Fix-wrong-comment-related-to-link-detection.patch

@@ -0,0 +1,43 @@
+From patchwork Fri Jul 21 18:36:24 2017
+Content-Type: text/plain; charset="utf-8"
+MIME-Version: 1.0
+Content-Transfer-Encoding: 7bit
+Subject: [2/5] e1000e: Fix wrong comment related to link detection
+From: Benjamin Poirier <bpoirier@suse.com>
+X-Patchwork-Id: 9857489
+Message-Id: <20170721183627.13373-2-bpoirier@suse.com>
+To: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
+Cc: Lennart Sorensen <lsorense@csclub.uwaterloo.ca>,
+ intel-wired-lan@lists.osuosl.org, netdev@vger.kernel.org,
+ linux-kernel@vger.kernel.org
+Date: Fri, 21 Jul 2017 11:36:24 -0700
+
+Reading e1000e_check_for_copper_link() shows that get_link_status is set to
+false after link has been detected. Therefore, it stays TRUE until then.
+
+Signed-off-by: Benjamin Poirier <bpoirier@suse.com>
+Tested-by: Aaron Brown <aaron.f.brown@intel.com>
+---
+ drivers/net/ethernet/intel/e1000e/netdev.c | 4 ++--
+ 1 file changed, 2 insertions(+), 2 deletions(-)
+
+--- a/drivers/net/ethernet/intel/e1000e/netdev.c
++++ b/drivers/net/ethernet/intel/e1000e/netdev.c
+@@ -5066,7 +5066,7 @@ static bool e1000e_has_link(struct e1000
+ 
+ 	/* get_link_status is set on LSC (link status) interrupt or
+ 	 * Rx sequence error interrupt.  get_link_status will stay
+-	 * false until the check_for_link establishes link
++	 * true until the check_for_link establishes link
+ 	 * for copper adapters ONLY
+ 	 */
+ 	switch (hw->phy.media_type) {
+@@ -5084,7 +5084,7 @@ static bool e1000e_has_link(struct e1000
+ 		break;
+ 	case e1000_media_type_internal_serdes:
+ 		ret_val = hw->mac.ops.check_for_link(hw);
+-		link_active = adapter->hw.mac.serdes_has_link;
++		link_active = hw->mac.serdes_has_link;
+ 		break;
+ 	default:
+ 	case e1000_media_type_unknown:

target/linux/generic/pending-4.9/670-ipv6-allow-rejecting-with-source-address-failed-policy.patch

@@ -200,7 +200,7 @@ Signed-off-by: Jonas Gorski <jogo@openwrt.org>
  		net->ipv6.ip6_blk_hole_entry->dst.dev = dev;
  		net->ipv6.ip6_blk_hole_entry->rt6i_idev = in6_dev_get(dev);
  #endif
-@@ -3714,6 +3753,17 @@ static int __net_init ip6_route_net_init
+@@ -3718,6 +3757,17 @@ static int __net_init ip6_route_net_init
  	net->ipv6.ip6_blk_hole_entry->dst.ops = &net->ipv6.ip6_dst_ops;
  	dst_init_metrics(&net->ipv6.ip6_blk_hole_entry->dst,
  			 ip6_template_metrics, true);
@@ -218,7 +218,7 @@ Signed-off-by: Jonas Gorski <jogo@openwrt.org>
  #endif
  
  	net->ipv6.sysctl.flush_delay = 0;
-@@ -3732,6 +3782,8 @@ out:
+@@ -3736,6 +3786,8 @@ out:
  	return ret;
  
  #ifdef CONFIG_IPV6_MULTIPLE_TABLES
@@ -227,7 +227,7 @@ Signed-off-by: Jonas Gorski <jogo@openwrt.org>
  out_ip6_prohibit_entry:
  	kfree(net->ipv6.ip6_prohibit_entry);
  out_ip6_null_entry:
-@@ -3749,6 +3801,7 @@ static void __net_exit ip6_route_net_exi
+@@ -3753,6 +3805,7 @@ static void __net_exit ip6_route_net_exi
  #ifdef CONFIG_IPV6_MULTIPLE_TABLES
  	kfree(net->ipv6.ip6_prohibit_entry);
  	kfree(net->ipv6.ip6_blk_hole_entry);
@@ -235,7 +235,7 @@ Signed-off-by: Jonas Gorski <jogo@openwrt.org>
  #endif
  	dst_entries_destroy(&net->ipv6.ip6_dst_ops);
  }
-@@ -3822,6 +3875,9 @@ void __init ip6_route_init_special_entri
+@@ -3826,6 +3879,9 @@ void __init ip6_route_init_special_entri
  	init_net.ipv6.ip6_prohibit_entry->rt6i_idev = in6_dev_get(init_net.loopback_dev);
  	init_net.ipv6.ip6_blk_hole_entry->dst.dev = init_net.loopback_dev;
  	init_net.ipv6.ip6_blk_hole_entry->rt6i_idev = in6_dev_get(init_net.loopback_dev);

target/linux/ipq806x/patches-4.9/0016-clk-ipq4019-report-accurate-fixed-clock-rates.patch

@@ -13,7 +13,7 @@ Signed-off-by: Matthew McClintock <mmcclint@qca.qualcomm.com>
 
 --- a/drivers/clk/qcom/gcc-ipq4019.c
 +++ b/drivers/clk/qcom/gcc-ipq4019.c
-@@ -1317,12 +1317,12 @@ static int gcc_ipq4019_probe(struct plat
+@@ -1327,12 +1327,12 @@ static int gcc_ipq4019_probe(struct plat
  {
  	struct device *dev = &pdev->dev;
  

target/linux/lantiq/patches-4.9/0090-spi-lantiq-ssc-add-support-for-Lantiq-SSC-SPI-contro.patch

@@ -65,7 +65,7 @@ Signed-off-by: Mark Brown <broonie@kernel.org>
 +};
 --- a/drivers/spi/Kconfig
 +++ b/drivers/spi/Kconfig
-@@ -403,6 +403,14 @@ config SPI_NUC900
+@@ -404,6 +404,14 @@ config SPI_NUC900
  	help
  	  SPI driver for Nuvoton NUC900 series ARM SoCs
  

target/linux/layerscape/patches-4.9/301-arch-support-layerscape.patch

@@ -310,7 +310,7 @@ Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
  #define PROT_SECT_NORMAL	(PROT_SECT_DEFAULT | PMD_SECT_PXN | PMD_SECT_UXN | PMD_ATTRINDX(MT_NORMAL))
 --- a/arch/arm64/include/asm/pgtable.h
 +++ b/arch/arm64/include/asm/pgtable.h
-@@ -356,6 +356,11 @@ static inline int pmd_protnone(pmd_t pmd
+@@ -370,6 +370,11 @@ static inline int pmd_protnone(pmd_t pmd
  	__pgprot_modify(prot, PTE_ATTRINDX_MASK, PTE_ATTRINDX(MT_DEVICE_nGnRnE) | PTE_PXN | PTE_UXN)
  #define pgprot_writecombine(prot) \
  	__pgprot_modify(prot, PTE_ATTRINDX_MASK, PTE_ATTRINDX(MT_NORMAL_NC) | PTE_PXN | PTE_UXN)

target/linux/layerscape/patches-4.9/815-spi-support-layerscape.patch

@@ -15,16 +15,6 @@ Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
  drivers/spi/spi-fsl-dspi.c | 309 ++++++++++++++++++++++++++++++++++++++++++++-
  2 files changed, 305 insertions(+), 5 deletions(-)
 
---- a/drivers/spi/Kconfig
-+++ b/drivers/spi/Kconfig
-@@ -365,6 +365,7 @@ config SPI_FSL_SPI
- config SPI_FSL_DSPI
- 	tristate "Freescale DSPI controller"
- 	select REGMAP_MMIO
-+	depends on HAS_DMA
- 	depends on SOC_VF610 || SOC_LS1021A || ARCH_LAYERSCAPE || COMPILE_TEST
- 	help
- 	  This enables support for the Freescale DSPI controller in master
 --- a/drivers/spi/spi-fsl-dspi.c
 +++ b/drivers/spi/spi-fsl-dspi.c
 @@ -15,6 +15,8 @@

target/linux/pistachio/patches-4.9/411-mtd-nand-Check-length-of-ID-before-reading-bits-per-.patch

@@ -21,7 +21,7 @@ Signed-off-by: Ezequiel Garcia <ezequiel.garcia@imgtec.com>
 
 --- a/drivers/mtd/nand/nand_base.c
 +++ b/drivers/mtd/nand/nand_base.c
-@@ -4040,7 +4040,8 @@ static bool find_full_id_nand(struct mtd
+@@ -4043,7 +4043,8 @@ static bool find_full_id_nand(struct mtd
  		mtd->erasesize = type->erasesize;
  		mtd->oobsize = type->oobsize;
  

target/linux/ramips/patches-4.9/0040-nand-hack.patch

@@ -18,7 +18,7 @@
  			if (ret < 0) {
  				if (use_bufpoi)
  					/* Invalidate page cache */
-@@ -3203,8 +3207,11 @@ int nand_erase_nand(struct mtd_info *mtd
+@@ -3206,8 +3210,11 @@ int nand_erase_nand(struct mtd_info *mtd
  		    (page + pages_per_block))
  			chip->pagebuf = -1;
  
@@ -31,7 +31,7 @@
  		/*
  		 * See if operation failed and additional status checks are
  		 * available
-@@ -4398,6 +4405,7 @@ int nand_scan_ident(struct mtd_info *mtd
+@@ -4401,6 +4408,7 @@ int nand_scan_ident(struct mtd_info *mtd
  		 * cmdfunc() both expect cmd_ctrl() to be populated,
  		 * so we need to check that that's the case
  		 */

target/linux/ramips/patches-4.9/0042-SPI-ralink-add-Ralink-SoC-spi-driver.patch

@@ -16,7 +16,7 @@ Acked-by: John Crispin <blogic@openwrt.org>
 
 --- a/drivers/spi/Kconfig
 +++ b/drivers/spi/Kconfig
-@@ -533,6 +533,12 @@ config SPI_QUP
+@@ -534,6 +534,12 @@ config SPI_QUP
  	  This driver can also be built as a module.  If so, the module
  	  will be called spi_qup.
  

target/linux/ramips/patches-4.9/0043-spi-add-mt7621-support.patch

@@ -13,7 +13,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
 
 --- a/drivers/spi/Kconfig
 +++ b/drivers/spi/Kconfig
-@@ -539,6 +539,12 @@ config SPI_RT2880
+@@ -540,6 +540,12 @@ config SPI_RT2880
  	help
  	  This selects a driver for the Ralink RT288x/RT305x SPI Controller.
  

target/linux/ramips/patches-4.9/0099-pci-mt7620.patch

@@ -8,12 +8,3 @@
  
  #define PPLL_DRV			0xa0
  #define PDRV_SW_SET			(1<<31)
-@@ -121,7 +120,7 @@ static int wait_pciephy_busy(void)
- 		else
- 			break;
- 		if (retry++ > WAITRETRY_MAX) {
--			printk(KERN_WARN "PCIE-PHY retry failed.\n");
-+			pr_warn("PCIE-PHY retry failed.\n");
- 			return -1;
- 		}
- 	}

target/linux/ramips/patches-4.9/0102-MIPS-ralink-Fix-MT7628-pinmux.patch

@@ -1,33 +0,0 @@
-From 8ef4b43cd3794d63052d85898e42424fd3b14d24 Mon Sep 17 00:00:00 2001
-From: Mathias Kresin <dev@kresin.me>
-Date: Thu, 11 May 2017 08:11:14 +0200
-Subject: [PATCH 1/2] MIPS: ralink: Fix MT7628 pinmux
-
-According to the datasheet the REFCLK pin is shared with GPIO#37 and
-the PERST pin is shared with GPIO#36.
-
-Fixes: 53263a1c6852 ("MIPS: ralink: add mt7628an support")
-Signed-off-by: Mathias Kresin <dev@kresin.me>
-Acked-by: John Crispin <john@phrozen.org>
-Cc: Ralf Baechle <ralf@linux-mips.org>
-Cc: linux-mips@linux-mips.org
-Cc: <stable@vger.kernel.org> # 3.19+
-Patchwork: https://patchwork.linux-mips.org/patch/16046/
-Signed-off-by: James Hogan <jhogan@kernel.org>
----
- arch/mips/ralink/mt7620.c | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/arch/mips/ralink/mt7620.c
-+++ b/arch/mips/ralink/mt7620.c
-@@ -141,8 +141,8 @@ static struct rt2880_pmx_func i2c_grp_mt
- 	FUNC("i2c", 0, 4, 2),
- };
- 
--static struct rt2880_pmx_func refclk_grp_mt7628[] = { FUNC("reclk", 0, 36, 1) };
--static struct rt2880_pmx_func perst_grp_mt7628[] = { FUNC("perst", 0, 37, 1) };
-+static struct rt2880_pmx_func refclk_grp_mt7628[] = { FUNC("reclk", 0, 37, 1) };
-+static struct rt2880_pmx_func perst_grp_mt7628[] = { FUNC("perst", 0, 36, 1) };
- static struct rt2880_pmx_func wdt_grp_mt7628[] = { FUNC("wdt", 0, 38, 1) };
- static struct rt2880_pmx_func spi_grp_mt7628[] = { FUNC("spi", 0, 7, 4) };
- 

target/linux/ramips/patches-4.9/0103-MIPS-ralink-Fix-typo-in-mt7628-pinmux-function

@@ -1,31 +0,0 @@
-From 05a67cc258e75ac9758e6f13d26337b8be51162a Mon Sep 17 00:00:00 2001
-From: Mathias Kresin <dev@kresin.me>
-Date: Thu, 11 May 2017 08:11:15 +0200
-Subject: [PATCH 2/2] MIPS: ralink: Fix typo in mt7628 pinmux function
-
-There is a typo inside the pinmux setup code. The function is called
-refclk and not reclk.
-
-Fixes: 53263a1c6852 ("MIPS: ralink: add mt7628an support")
-Signed-off-by: Mathias Kresin <dev@kresin.me>
-Acked-by: John Crispin <john@phrozen.org>
-Cc: Ralf Baechle <ralf@linux-mips.org>
-Cc: linux-mips@linux-mips.org
-Cc: <stable@vger.kernel.org> # 3.19+
-Patchwork: https://patchwork.linux-mips.org/patch/16047/
-Signed-off-by: James Hogan <jhogan@kernel.org>
----
- arch/mips/ralink/mt7620.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/arch/mips/ralink/mt7620.c
-+++ b/arch/mips/ralink/mt7620.c
-@@ -141,7 +141,7 @@ static struct rt2880_pmx_func i2c_grp_mt
- 	FUNC("i2c", 0, 4, 2),
- };
- 
--static struct rt2880_pmx_func refclk_grp_mt7628[] = { FUNC("reclk", 0, 37, 1) };
-+static struct rt2880_pmx_func refclk_grp_mt7628[] = { FUNC("refclk", 0, 37, 1) };
- static struct rt2880_pmx_func perst_grp_mt7628[] = { FUNC("perst", 0, 36, 1) };
- static struct rt2880_pmx_func wdt_grp_mt7628[] = { FUNC("wdt", 0, 38, 1) };
- static struct rt2880_pmx_func spi_grp_mt7628[] = { FUNC("spi", 0, 7, 4) };

target/linux/ramips/patches-4.9/0901-spansion_nand_id_fix.patch

@@ -13,7 +13,7 @@ Signed-off-by: Nikolay Martynov <mar.kolya@gmail.com>
 
 --- a/drivers/mtd/nand/nand_base.c
 +++ b/drivers/mtd/nand/nand_base.c
-@@ -3850,6 +3850,7 @@ static void nand_decode_ext_id(struct mt
+@@ -3853,6 +3853,7 @@ static void nand_decode_ext_id(struct mt
  	/*
  	 * Field definitions are in the following datasheets:
  	 * Old style (4,5 byte ID): Samsung K9GAG08U0M (p.32)
@@ -21,7 +21,7 @@ Signed-off-by: Nikolay Martynov <mar.kolya@gmail.com>
  	 * New Samsung (6 byte ID): Samsung K9GAG08U0F (p.44)
  	 * Hynix MLC   (6 byte ID): Hynix H27UBG8T2B (p.22)
  	 *
-@@ -3947,6 +3948,19 @@ static void nand_decode_ext_id(struct mt
+@@ -3950,6 +3951,19 @@ static void nand_decode_ext_id(struct mt
  		*busw = (extid & 0x01) ? NAND_BUSWIDTH_16 : 0;
  
  		/*