add mw316 v1, sgr w500 ebi fit v3,comba ap2600i,comba ap2600ifm.

target/linux/ar71xx/base-files/etc/board.d/01_leds

@@ -420,6 +420,14 @@ hornet-ub-x2)
 	ucidef_set_led_wlan "wlan" "WLAN" "alfa:blue:wlan" "phy0tpt"
 	ucidef_set_led_usbdev "usb" "USB" "alfa:blue:usb" "1-1"
 	;;
+maselink-ap2600i)
+	ucidef_set_led_netdev "wan" "WAN" "ap2600i:green:run" "eth0"
+	ucidef_set_led_wlan "wlan" "WLAN" "ap2600i:green:wlan" "phy0tpt"
+	;;
+maselink-ap2600ifm)
+	ucidef_set_led_wlan "wlan1" "WLAN1" "ap2600ifm:green:rf1" "phy0tpt"
+	ucidef_set_led_wlan "wlan2" "WLAN2" "ap2600ifm:green:rf2" "phy1tpt"
+	;;
 mc-mac1200r)
 	ucidef_set_led_wlan "wlan2g" "WLAN2G" "mercury:green:wlan2g" "phy1tpt"
 	ucidef_set_led_wlan "wlan5g" "WLAN5G" "mercury:green:wlan5g" "phy0tpt"
@@ -463,6 +471,13 @@ mr900v2)
 	ucidef_set_led_default "status-red" "Status (red)" "mr900:red:wifi" "0"
 	ucidef_set_led_default "status-green" "Status (green)" "mr900:green:wifi" "0"
 	;;
+mw316r-v1)
+	ucidef_set_led_netdev "wan" "WAN" "mercury:green:wan" "eth0"
+	ucidef_set_led_switch "lan1" "LAN1" "mercury:green:lan1" "switch0" "0x02"
+	ucidef_set_led_switch "lan2" "LAN2" "mercury:green:lan2" "switch0" "0x04"
+	ucidef_set_led_switch "lan3" "LAN3" "mercury:green:lan3" "switch0" "0x08"
+	ucidef_set_led_switch "lan4" "LAN4" "mercury:green:lan4" "switch0" "0x10"
+	;;
 mynet-n600)
 	ucidef_set_led_netdev "wan" "WAN" "wd:blue:internet" "eth1"
 	ucidef_set_led_switch "lan1" "LAN1" "wd:green:lan1" "switch0" "0x02"
@@ -565,6 +580,10 @@ re450)
 	ucidef_set_led_wlan "wlan2g" "WLAN 2.4 GHz" "$board:blue:wlan2g" "phy1tpt"
 	ucidef_set_led_wlan "wlan5g" "WLAN 5 GHz" "$board:blue:wlan5g" "phy0tpt"
 	;;
+sgr-w500-ebi-fit-v3)
+	ucidef_set_led_netdev "wan" "WAN" "grentech:green:wan" "eth0"
+	ucidef_set_led_wlan "wlan" "WLAN" "grentech:green:wlan" "phy0tpt"
+	;;
 sgr-w500-n85b-v2)
 	ucidef_set_led_wlan "wlan" "WLAN" "grentech:green:wlan2g" "phy0tpt"
 	;;

target/linux/ar71xx/base-files/etc/board.d/02_network

@@ -133,6 +133,9 @@ ar71xx_setup_interfaces()
 	wi2a-ac200i|\
 	wndap360|\
         sgr-w500-n85b-v2|\
+        sgr-w500-ebi-fit-v3|\
+        maselink-ap2600i|\
+        maselink-ap2600ifm|\
 	wp543)
 		ucidef_set_interface_lan "eth0"
 		;;
@@ -163,6 +166,11 @@ ar71xx_setup_interfaces()
 	wrtnode2q)
 		ucidef_set_interfaces_lan_wan "eth1" "eth0"
 		;;
+        mw316r-v1)
+	        ucidef_set_interfaces_lan_wan "eth1" "eth0"
+	        ucidef_add_switch "switch0" \
+		        "0@eth1" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1"
+	        ;;
 	rb-750-r2|\
 	rb-750p-pbr2|\
 	rb-750up-r2)

target/linux/ar71xx/base-files/etc/diag.sh

@@ -230,6 +230,13 @@ get_status_led() {
 	ls-sr71)
 		status_led="ubnt:green:d22"
 		;;
+	maselink-ap2600i)
+		status_led="ap2600i:green:power"
+		;;
+        maselink-ap2600ifm)
+		status_led="ap2600ifm:green:power"
+		;;
+        mw316r-v1|\
 	mc-mac1200r)
 		status_led="mercury:green:system"
 		;;
@@ -353,6 +360,9 @@ get_status_led() {
         sgr-w500-n85b-v2)
 		status_led="grentech:green:status"
 		;;
+	sgr-w500-ebi-fit-v3)
+		status_led="grentech:green:status"
+		;;
 	smart-300)
 		status_led="nc-link:green:system"
 		;;

target/linux/ar71xx/base-files/lib/ar71xx.sh

@@ -263,6 +263,9 @@ tplink_board_detect() {
 	"120000"*)
 		model="MERCURY MAC1200R"
 		;;
++	"031600"*)
+		model="Mercury MW316R"
+		;;
 	"254300"*)
 		model="TP-Link TL-WR2543N/ND"
 		;;
@@ -720,6 +723,15 @@ ar71xx_board_detect() {
 	*"MAC1200R")
 		name="mc-mac1200r"
 		;;
+        *"MW316R v1")
+		name="mw316r-v1"
+		;;
+        *"MASELink AP2600-I")
+		name="maselink-ap2600i"
+		;;
+        *"MASELink AP2600-IFM")
+		name="maselink-ap2600ifm"
+		;;
 	*"MiniBox V1.0")
 		name="minibox-v1"
 		;;
@@ -995,6 +1007,9 @@ ar71xx_board_detect() {
 	"GRENTECH SGR-W500-N85b v2.0")
 		name="sgr-w500-n85b-v2"
 		;;
+	"GRENTECH SGR-W500-EBI(FIT) v3.0")
+		name="sgr-w500-ebi-fit-v3"
+		;;
 	*"SMART-300")
 		name="smart-300"
 		;;

target/linux/ar71xx/base-files/lib/upgrade/platform.sh

@@ -326,9 +326,12 @@ platform_check_image() {
 	dw33d|\
 	f9k1115v2|\
 	hornet-ub|\
+        maselink-ap2600i|\
+        maselink-ap2600ifm|\
 	mr12|\
 	mr16|\
         sgr-w500-n85b-v2|\
+        sgr-w500-ebi-fit-v3|\
 	zbt-we1526|\
 	zcn-1523h-2|\
 	zcn-1523h-5)
@@ -387,6 +390,7 @@ platform_check_image() {
 	el-mini|\
 	gl-inet|\
 	mc-mac1200r|\
+        mw316r-v1|\
 	minibox-v1|\
 	omy-g1|\
 	omy-x1|\

target/linux/ar71xx/config-4.4

@@ -128,6 +128,9 @@ CONFIG_ATH79_MACH_JWAP003=y
 CONFIG_ATH79_MACH_JWAP230=y
 CONFIG_ATH79_MACH_LIMA=y
 CONFIG_ATH79_MACH_MC_MAC1200R=y
+CONFIG_ATH79_MACH_MW316R_V1=y
+CONFIG_ATH79_MACH_MASELINK_AP2600I=y
+CONFIG_ATH79_MACH_MASELINK_AP2600IFM=y
 CONFIG_ATH79_MACH_MR12=y
 CONFIG_ATH79_MACH_MR16=y
 CONFIG_ATH79_MACH_MR1750=y
@@ -169,6 +172,7 @@ CONFIG_ATH79_MACH_SC1750=y
 CONFIG_ATH79_MACH_SC300M=y
 CONFIG_ATH79_MACH_SC450=y
 CONFIG_ATH79_MACH_SGR_W500_N85B_V2=y
+CONFIG_ATH79_MACH_SGR_W500_EBI_FIT_V3=y
 CONFIG_ATH79_MACH_SMART_300=y
 CONFIG_ATH79_MACH_SOM9331=y
 CONFIG_ATH79_MACH_SR3200=y

target/linux/ar71xx/config-4.9

@@ -126,6 +126,9 @@ CONFIG_ATH79_MACH_JWAP003=y
 CONFIG_ATH79_MACH_JWAP230=y
 CONFIG_ATH79_MACH_LIMA=y
 CONFIG_ATH79_MACH_MC_MAC1200R=y
+CONFIG_ATH79_MACH_MW316R_V1=y
+CONFIG_ATH79_MACH_MASELINK_AP2600I=y
+CONFIG_ATH79_MACH_MASELINK_AP2600IFM=y
 CONFIG_ATH79_MACH_MR12=y
 CONFIG_ATH79_MACH_MR16=y
 CONFIG_ATH79_MACH_MR1750=y
@@ -167,6 +170,7 @@ CONFIG_ATH79_MACH_SC1750=y
 CONFIG_ATH79_MACH_SC300M=y
 CONFIG_ATH79_MACH_SC450=y
 CONFIG_ATH79_MACH_SGR_W500_N85B_V2=y
+CONFIG_ATH79_MACH_SGR_W500_EBI_FIT_V3=y
 CONFIG_ATH79_MACH_SMART_300=y
 CONFIG_ATH79_MACH_SOM9331=y
 CONFIG_ATH79_MACH_SR3200=y

target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt

@@ -2182,3 +2182,40 @@ config ATH79_MACH_SGR_W500_N85B_V2
 	select ATH79_DEV_M25P80
 	select ATH79_DEV_WMAC
 	select ATH79_DEV_USB
+
+config ATH79_MACH_MASELINK_AP2600I
+	bool "Comba MASELink AP2600-I support"
+	select SOC_AR934X
+	select ATH79_DEV_ETH
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_M25P80
+	select ATH79_DEV_WMAC
+	select ATH79_DEV_USB
+
+config ATH79_MACH_MASELINK_AP2600IFM
+	bool "Comba MASELink AP2600-IFM support"
+	select SOC_AR71XX
+	select ATH79_DEV_ETH
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_M25P80
+	select ATH79_DEV_USB
+
+config ATH79_MACH_SGR_W500_EBI_FIT_V3
+	bool "GRENTECH SGR-W500-EBI(FIT) v3.0 support"
+	select SOC_AR71XX
+	select ATH79_DEV_ETH
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_M25P80
+	select ATH79_DEV_USB
+
+config ATH79_MACH_MW316R_V1
+       bool "Mercury MW316R v1 support"
+       select SOC_QCA953X
+       select ATH79_DEV_ETH
+       select ATH79_DEV_GPIO_BUTTONS
+       select ATH79_DEV_LEDS_GPIO
+       select ATH79_DEV_M25P80
+       select ATH79_DEV_WMAC

target/linux/ar71xx/files/arch/mips/ath79/Makefile

@@ -134,6 +134,9 @@ obj-$(CONFIG_ATH79_MACH_JWAP003)		+= mach-jwap003.o
 obj-$(CONFIG_ATH79_MACH_JWAP230)		+= mach-jwap230.o
 obj-$(CONFIG_ATH79_MACH_LIMA)			+= mach-lima.o
 obj-$(CONFIG_ATH79_MACH_MC_MAC1200R)		+= mach-mc-mac1200r.o
+obj-$(CONFIG_ATH79_MACH_MW316R_V1)	        += mach-mw316r-v1.o
+obj-$(CONFIG_ATH79_MACH_MASELINK_AP2600I)	+= mach-maselink-ap2600i.o
+obj-$(CONFIG_ATH79_MACH_MASELINK_AP2600IFM)	+= mach-maselink-ap2600ifm.o
 obj-$(CONFIG_ATH79_MACH_MR12)			+= mach-mr12.o
 obj-$(CONFIG_ATH79_MACH_MR16)			+= mach-mr16.o
 obj-$(CONFIG_ATH79_MACH_MR1750)			+= mach-mr1750.o
@@ -176,6 +179,7 @@ obj-$(CONFIG_ATH79_MACH_SC1750)			+= mach-sc1750.o
 obj-$(CONFIG_ATH79_MACH_SC300M)			+= mach-sc300m.o
 obj-$(CONFIG_ATH79_MACH_SC450)			+= mach-sc450.o
 obj-$(CONFIG_ATH79_MACH_SGR_W500_N85B_V2)	+= mach-sgr-w500-n85b-v2.o
+obj-$(CONFIG_ATH79_MACH_SGR_W500_EBI_FIT_V3)	+= mach-sgr-w500-ebi-fit-v3.o
 obj-$(CONFIG_ATH79_MACH_SMART_300)		+= mach-smart-300.o
 obj-$(CONFIG_ATH79_MACH_SOM9331)		+= mach-som9331.o
 obj-$(CONFIG_ATH79_MACH_SR3200)			+= mach-sr3200.o

target/linux/ar71xx/files/arch/mips/ath79/mach-maselink-ap2600i.c

@@ -0,0 +1,137 @@
+/*
+ * Comba MASELink AP2600-I board support
+ *
+ * Copyright (c) 2016 Weijie Gao <hackpascal@gmail.com>
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+#include <linux/pci.h>
+#include <linux/phy.h>
+#include <linux/platform_device.h>
+#include <linux/ath9k_platform.h>
+#include <linux/platform_data/phy-at803x.h>
+
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "dev-ap9x-pci.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-nfc.h"
+#include "dev-spi.h"
+#include "dev-usb.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+
+#define AP2600I_GPIO_LED_POWER_RED	11
+#define AP2600I_GPIO_LED_POWER_GREEN	12
+#define AP2600I_GPIO_LED_RUN		13
+#define AP2600I_GPIO_LED_WLAN		14
+
+#define AP2600I_GPIO_BUTTON_RESET	15
+
+#define AP2600I_KEYS_POLL_INTERVAL	20	/* msecs */
+#define AP2600I_KEYS_DEBOUNCE_INTERVAL	(3 * AP2600I_KEYS_POLL_INTERVAL)
+
+#define AP2600I_MAC0_OFFSET		0
+#define AP2600I_WMAC_CALDATA_OFFSET	0x1000
+#define AP2600I_PCIE_CALDATA_OFFSET	0x5000
+
+static struct gpio_led ap2600i_leds_gpio[] __initdata = {
+	{
+		.name		= "ap2600i:red:power",
+		.gpio		= AP2600I_GPIO_LED_POWER_RED,
+		.active_low	= 1,
+	},
+	{
+		.name		= "ap2600i:green:power",
+		.gpio		= AP2600I_GPIO_LED_POWER_GREEN,
+		.active_low	= 1,
+	},
+	{
+		.name		= "ap2600i:green:run",
+		.gpio		= AP2600I_GPIO_LED_RUN,
+		.active_low	= 1,
+	},
+	{
+		.name		= "ap2600i:green:wlan",
+		.gpio		= AP2600I_GPIO_LED_WLAN,
+		.active_low	= 1,
+	}
+};
+
+static struct gpio_keys_button ap2600i_gpio_keys[] __initdata = {
+	{
+		.desc		= "reset",
+		.type		= EV_KEY,
+		.code		= KEY_RESTART,
+		.debounce_interval = AP2600I_KEYS_DEBOUNCE_INTERVAL,
+		.gpio		= AP2600I_GPIO_BUTTON_RESET,
+		.active_low	= 1,
+	},
+};
+
+static struct at803x_platform_data ap2600i_ar8035_data = {
+	.enable_rgmii_rx_delay = 1,
+	.fixup_rgmii_tx_delay = 1,
+};
+
+static struct mdio_board_info ap2600i_mdio0_info[] = {
+	{
+		.bus_id = "ag71xx-mdio.0",
+		.phy_addr = 4,
+		.platform_data = &ap2600i_ar8035_data,
+	},
+};
+
+static void __init ap2600i_setup(void)
+{
+	u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
+
+	ath79_register_m25p80(NULL);
+
+	ath79_register_leds_gpio(-1, ARRAY_SIZE(ap2600i_leds_gpio),
+				 ap2600i_leds_gpio);
+	ath79_register_gpio_keys_polled(-1, AP2600I_KEYS_POLL_INTERVAL,
+					ARRAY_SIZE(ap2600i_gpio_keys),
+					ap2600i_gpio_keys);
+
+	ath79_register_wmac(art + AP2600I_WMAC_CALDATA_OFFSET, NULL);
+	ap91_pci_init(art + AP2600I_PCIE_CALDATA_OFFSET, NULL);
+
+	ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0 |
+				   AR934X_ETH_CFG_SW_ONLY_MODE);
+
+	ath79_register_mdio(0, 0x0);
+
+	ath79_init_mac(ath79_eth0_data.mac_addr, art + AP2600I_MAC0_OFFSET, 0);
+
+	mdiobus_register_board_info(ap2600i_mdio0_info,
+				    ARRAY_SIZE(ap2600i_mdio0_info));
+
+	/* GMAC0 is connected to an AR8035 Gigabit PHY */
+	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+	ath79_eth0_data.phy_mask = BIT(4);
+	ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
+	ath79_eth0_pll_data.pll_1000 = 0x0e000000;
+	ath79_eth0_pll_data.pll_100 = 0x0101;
+	ath79_eth0_pll_data.pll_10 = 0x1313;
+	ath79_register_eth(0);
+}
+
+MIPS_MACHINE(ATH79_MACH_MASELINK_AP2600I, "AP2600I", "Comba MASELink AP2600-I",
+	     ap2600i_setup);

target/linux/ar71xx/files/arch/mips/ath79/mach-maselink-ap2600ifm.c

@@ -0,0 +1,147 @@
+/*
+ * Comba MASELink AP2600-IFM board support
+ *
+ * Copyright (c) 2017 Weijie Gao <hackpascal@gmail.com>
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+#include <linux/pci.h>
+#include <linux/phy.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "pci.h"
+#include "common.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-spi.h"
+#include "dev-usb.h"
+#include "machtypes.h"
+#include "nvram.h"
+
+#define AP2600IFM_GPIO_LED_RF1		2
+#define AP2600IFM_GPIO_LED_RF1_TOP	7
+#define AP2600IFM_GPIO_LED_RF2		4
+#define AP2600IFM_GPIO_LED_RF2_TOP	5
+#define AP2600IFM_GPIO_LED_D24		0
+#define AP2600IFM_GPIO_LED_D24_TOP	3
+
+#define AP2600IFM_GPIO_BUTTON_RESET	8
+
+#define AP2600IFM_KEYS_POLL_INTERVAL	20	/* msecs */
+#define AP2600IFM_KEYS_DEBOUNCE_INTERVAL	(3 * AP2600IFM_KEYS_POLL_INTERVAL)
+
+#define AP2600IFM_NVRAM_ADDR			0x1f040004
+#define AP2600IFM_NVRAM_SIZE			0x3fffc
+
+static struct gpio_led ap2600ifm_leds_gpio[] __initdata = {
+	{
+		.name		= "ap2600ifm:green:rf1",
+		.gpio		= AP2600IFM_GPIO_LED_RF1,
+		.active_low	= 1,
+	},
+	{
+		.name		= "ap2600ifm:green:rf1top",
+		.gpio		= AP2600IFM_GPIO_LED_RF1_TOP,
+		.active_low	= 1,
+	},
+	{
+		.name		= "ap2600ifm:green:rf2",
+		.gpio		= AP2600IFM_GPIO_LED_RF2,
+		.active_low	= 1,
+	},
+	{
+		.name		= "ap2600ifm:green:rf2top",
+		.gpio		= AP2600IFM_GPIO_LED_RF2_TOP,
+		.active_low	= 1,
+	},
+	{
+		.name		= "ap2600ifm:green:d24",
+		.gpio		= AP2600IFM_GPIO_LED_D24,
+		.active_low	= 1,
+	},
+	{
+		.name		= "ap2600ifm:green:d24top",
+		.gpio		= AP2600IFM_GPIO_LED_D24_TOP,
+		.active_low	= 1,
+	}
+};
+
+static struct gpio_keys_button ap2600ifm_gpio_keys[] __initdata = {
+	{
+		.desc		= "reset",
+		.type		= EV_KEY,
+		.code		= KEY_RESTART,
+		.debounce_interval = AP2600IFM_KEYS_DEBOUNCE_INTERVAL,
+		.gpio		= AP2600IFM_GPIO_BUTTON_RESET,
+		.active_low	= 1,
+	},
+};
+
+static struct mdio_board_info ap2600ifm_mdio0_info[] = {
+	{
+		.bus_id = "ag71xx-mdio.0",
+		.phy_addr = 20,
+	},
+};
+
+static void ap2600ifm_get_mac(const char *name, char *mac)
+{
+	u8 *nvram = (u8 *) KSEG1ADDR(AP2600IFM_NVRAM_ADDR);
+	int err;
+
+	err = ath79_nvram_parse_mac_addr(nvram, AP2600IFM_NVRAM_SIZE,
+					 name, mac);
+	if (err)
+		pr_err("%s not found in environment variables\n", name);
+}
+
+static void __init ap2600ifm_setup(void)
+{
+	ath79_register_m25p80(NULL);
+
+	ath79_register_leds_gpio(-1, ARRAY_SIZE(ap2600ifm_leds_gpio),
+				 ap2600ifm_leds_gpio);
+	ath79_register_gpio_keys_polled(-1, AP2600IFM_KEYS_POLL_INTERVAL,
+					ARRAY_SIZE(ap2600ifm_gpio_keys),
+					ap2600ifm_gpio_keys);
+
+	ath79_register_pci();
+
+	ath79_register_mdio(0, 0);
+
+	mdiobus_register_board_info(ap2600ifm_mdio0_info,
+				    ARRAY_SIZE(ap2600ifm_mdio0_info));
+
+	ap2600ifm_get_mac("macaddr=", ath79_eth0_data.mac_addr);
+
+	ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
+	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+	ath79_eth0_data.phy_mask = BIT(20);
+	ath79_eth0_data.speed = SPEED_1000;
+	ath79_eth0_data.duplex = DUPLEX_FULL;
+	ath79_eth0_pll_data.pll_1000 = 0x00110000;
+	ath79_eth0_pll_data.pll_100 = 0x0001099;
+	ath79_eth0_pll_data.pll_10 = 0x00991099;
+
+	ath79_register_eth(0);
+}
+
+MIPS_MACHINE(ATH79_MACH_MASELINK_AP2600IFM, "AP2600IFM", "Comba MASELink AP2600-IFM",
+	     ap2600ifm_setup);

target/linux/ar71xx/files/arch/mips/ath79/mach-mw316r-v1.c

@@ -0,0 +1,143 @@
+/*
+ *  Mercury MW316R v1
+ *
+ *  Copyright (C) 2014 Matthias Schiffer <mschiffer@universe-factory.net>
+ *  Copyright (C) 2017 Weijie Gao <hackpascal@gmail.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-wmac.h"
+#include "dev-usb.h"
+#include "machtypes.h"
+
+#define MW316RV1_GPIO_LED_SYS	13
+#define MW316RV1_GPIO_LED_WAN	4
+#define MW316RV1_GPIO_LED_LAN1	11
+#define MW316RV1_GPIO_LED_LAN2	14
+#define MW316RV1_GPIO_LED_LAN3	15
+#define MW316RV1_GPIO_LED_LAN4	16
+#define MW316RV1_GPIO_LED_TURBO	17
+
+#define MW316RV1_GPIO_BTN_RESET	12
+#define MW316RV1_GPIO_BTN_TURBO	1
+
+#define MW316RV1_KEYS_POLL_INTERVAL	20	/* msecs */
+#define MW316RV1_KEYS_DEBOUNCE_INTERVAL (3 * MW316RV1_KEYS_POLL_INTERVAL)
+
+static const char *mw316r_v1_part_probes[] = {
+	"tp-link",
+	NULL,
+};
+
+static struct flash_platform_data mw316r_v1_flash_data = {
+	.part_probes	= mw316r_v1_part_probes,
+};
+
+static struct gpio_led mw316r_v1_leds_gpio[] __initdata = {
+	{
+		.name		= "mercury:green:wan",
+		.gpio		= MW316RV1_GPIO_LED_WAN,
+		.active_low	= 1,
+	}, {
+		.name		= "mercury:green:lan1",
+		.gpio		= MW316RV1_GPIO_LED_LAN1,
+		.active_low	= 1,
+	}, {
+		.name		= "mercury:green:lan2",
+		.gpio		= MW316RV1_GPIO_LED_LAN2,
+		.active_low	= 1,
+	}, {
+		.name		= "mercury:green:lan3",
+		.gpio		= MW316RV1_GPIO_LED_LAN3,
+		.active_low	= 1,
+	}, {
+		.name		= "mercury:green:lan4",
+		.gpio		= MW316RV1_GPIO_LED_LAN4,
+		.active_low	= 1,
+	}, {
+		.name		= "mercury:green:system",
+		.gpio		= MW316RV1_GPIO_LED_SYS,
+		.active_low	= 1,
+	}, {
+		.name		= "mercury:green:turbo",
+		.gpio		= MW316RV1_GPIO_LED_TURBO,
+		.active_low	= 1,
+	},
+};
+
+static struct gpio_keys_button mw316r_v1_gpio_keys[] __initdata = {
+	{
+		.desc		= "reset",
+		.type		= EV_KEY,
+		.code		= KEY_RESTART,
+		.debounce_interval = MW316RV1_KEYS_DEBOUNCE_INTERVAL,
+		.gpio		= MW316RV1_GPIO_BTN_RESET,
+		.active_low	= 1,
+	}, {
+		.desc		= "turbo",
+		.type		= EV_KEY,
+		.code		= BTN_0,
+		.debounce_interval = MW316RV1_KEYS_DEBOUNCE_INTERVAL,
+		.gpio		= MW316RV1_GPIO_BTN_TURBO,
+		.active_low	= 1,
+	}
+};
+
+
+static void __init mw316r_v1_setup(void)
+{
+	u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
+	u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
+	u8 tmpmac[ETH_ALEN];
+
+	ath79_register_m25p80(&mw316r_v1_flash_data);
+
+	ath79_register_leds_gpio(-1, ARRAY_SIZE(mw316r_v1_leds_gpio),
+				 mw316r_v1_leds_gpio);
+
+	ath79_register_gpio_keys_polled(1, MW316RV1_KEYS_POLL_INTERVAL,
+					ARRAY_SIZE(mw316r_v1_gpio_keys),
+					mw316r_v1_gpio_keys);
+
+	ath79_setup_ar933x_phy4_switch(false, false);
+
+	ath79_register_mdio(0, 0x0);
+
+	/* WAN */
+	ath79_switch_data.phy_poll_mask |= BIT(4);
+	ath79_switch_data.phy4_mii_en = 1;
+	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
+	ath79_eth0_data.duplex = DUPLEX_FULL;
+	ath79_eth0_data.speed = SPEED_100;
+	ath79_eth0_data.phy_mask = BIT(4);
+	ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
+	ath79_register_eth(0);
+
+	/* LAN */
+	ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
+	ath79_eth1_data.duplex = DUPLEX_FULL;
+	ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1);
+	ath79_register_eth(1);
+
+	ath79_init_mac(tmpmac, mac, 1);
+	ath79_register_wmac(ee, tmpmac);
+
+	ath79_register_usb();
+}
+
+MIPS_MACHINE(ATH79_MACH_MW316R_V1, "MW316R-v1", "Mercury MW316R v1",
+	     mw316r_v1_setup);

target/linux/ar71xx/files/arch/mips/ath79/mach-sgr-w500-ebi-fit-v3.c

@@ -0,0 +1,116 @@
+/*
+ * GRENTECH SGR-W500-EBI(FIT) v3.0 board support
+ *
+ * Copyright (c) 2017 Weijie Gao <hackpascal@gmail.com>
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+#include <linux/pci.h>
+#include <linux/phy.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "pci.h"
+#include "common.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-spi.h"
+#include "dev-usb.h"
+#include "machtypes.h"
+
+#define GRENTECH_GPIO_LED_STATUS		5
+#define GRENTECH_GPIO_LED_WAN			4
+#define GRENTECH_GPIO_LED_WLAN			3
+
+#define GRENTECH_GPIO_BUTTON_RESET		8
+
+#define GRENTECH_KEYS_POLL_INTERVAL		20	/* msecs */
+#define GRENTECH_KEYS_DEBOUNCE_INTERVAL		(3 * GRENTECH_KEYS_POLL_INTERVAL)
+
+static struct gpio_led grentech_leds_gpio[] __initdata = {
+	{
+		.name		= "grentech:green:status",
+		.gpio		= GRENTECH_GPIO_LED_STATUS,
+		.active_low	= 1,
+	},
+	{
+		.name		= "grentech:green:wan",
+		.gpio		= GRENTECH_GPIO_LED_WAN,
+		.active_low	= 0,
+	},
+	{
+		.name		= "grentech:green:wlan",
+		.gpio		= GRENTECH_GPIO_LED_WLAN,
+		.active_low	= 0,
+	}
+};
+
+static struct gpio_keys_button grentech_gpio_keys[] __initdata = {
+	{
+		.desc		= "reset",
+		.type		= EV_KEY,
+		.code		= KEY_RESTART,
+		.debounce_interval = GRENTECH_KEYS_DEBOUNCE_INTERVAL,
+		.gpio		= GRENTECH_GPIO_BUTTON_RESET,
+		.active_low	= 1,
+	},
+};
+
+static struct mdio_board_info grentech_mdio0_info[] = {
+	{
+		.bus_id = "ag71xx-mdio.0",
+		.phy_addr = 1,
+	},
+};
+
+static void __init grentech_setup(void)
+{
+	u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
+
+	ath79_register_m25p80(NULL);
+
+	ath79_register_leds_gpio(-1, ARRAY_SIZE(grentech_leds_gpio),
+				 grentech_leds_gpio);
+	ath79_register_gpio_keys_polled(-1, GRENTECH_KEYS_POLL_INTERVAL,
+					ARRAY_SIZE(grentech_gpio_keys),
+					grentech_gpio_keys);
+
+	ath79_register_pci();
+
+	ath79_register_mdio(0, 0);
+
+	mdiobus_register_board_info(grentech_mdio0_info,
+				    ARRAY_SIZE(grentech_mdio0_info));
+
+	ath79_init_mac(ath79_eth0_data.mac_addr, art, 0);
+
+	ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
+	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+	ath79_eth0_data.phy_mask = BIT(1);
+	ath79_eth0_data.speed = SPEED_1000;
+	ath79_eth0_data.duplex = DUPLEX_FULL;
+	ath79_eth0_pll_data.pll_1000 = 0x00110000;
+	ath79_eth0_pll_data.pll_100 = 0x0001099;
+	ath79_eth0_pll_data.pll_10 = 0x00991099;
+
+	ath79_register_eth(0);
+}
+
+MIPS_MACHINE(ATH79_MACH_SGR_W500_EBI_FIT_V3, "SGRW500EBIFITV3", "GRENTECH SGR-W500-EBI(FIT) v3.0",
+	     grentech_setup);

target/linux/ar71xx/files/arch/mips/ath79/machtypes.h

@@ -127,6 +127,9 @@ enum ath79_mach_type {
 	ATH79_MACH_JWAP230,			/* jjPlus JWAP230 */
 	ATH79_MACH_LIMA,			/* 8devices Lima */
 	ATH79_MACH_MC_MAC1200R,			/* MERCURY MAC1200R */
+        ATH79_MACH_MW316R_V1,		        /* Mercury MW316R v1 */
+        ATH79_MACH_MASELINK_AP2600I,	        /* Comba MASELink AP2600-I */
+        ATH79_MACH_MASELINK_AP2600IFM,	        /* Comba MASELink AP2600-IFM */
 	ATH79_MACH_MR12,			/* Cisco Meraki MR12 */
 	ATH79_MACH_MR16,			/* Cisco Meraki MR16 */
 	ATH79_MACH_MR1750,			/* OpenMesh MR1750 */
@@ -204,6 +207,7 @@ enum ath79_mach_type {
 	ATH79_MACH_SC300M,			/* Abicom SC300M */
 	ATH79_MACH_SC450,			/* Abicom SC450 */
         ATH79_MACH_SGR_W500_N85B_V2,	        /* GRENTECH SGR-W500-N85B v2 */
+	ATH79_MACH_SGR_W500_EBI_FIT_V3,	        /* GRENTECH SGR-W500-EBI(FIT) v3.0 */
 	ATH79_MACH_SMART_300,			/* NC-LINK SMART-300 */
 	ATH79_MACH_SOM9331,			/* OpenEmbed SOM9331 */
 	ATH79_MACH_SR3200,			/* YunCore SR3200 */

target/linux/ar71xx/image/generic.mk

@@ -597,6 +597,15 @@ define Device/mc-mac1200r
 endef
 TARGET_DEVICES += mc-mac1200r
 
+define Device/mw316r-v1
+  $(Device/tplink-8mlzma)
+  DEVICE_TITLE := Mercury MW316R v1
+  BOARDNAME := MW316R-v1
+  DEVICE_PROFILE := MW316R
+  TPLINK_HWID := 0x03160001
+endef
+TARGET_DEVICES += mw316r-v1
+
 define Device/minibox-v1
   $(Device/tplink-16mlzma)
   DEVICE_TITLE := Gainstrong MiniBox V1.0

target/linux/ar71xx/image/legacy-devices.mk

@@ -595,3 +595,21 @@ define LegacyDevice/SGRW500N85BV2
   DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-storage
 endef
 LEGACY_DEVICES += SGRW500N85BV2
+
+define LegacyDevice/SGRW500EBIFITV3
+  DEVICE_TITLE := GRENTECH SGR-W500-EBI(FIT) v3.0
+  DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-storage
+endef
+LEGACY_DEVICES += SGRW500EBIFITV3
+
+define LegacyDevice/AP2600I
+  DEVICE_TITLE := Comba MASELink AP2600-I board
+  DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-storage
+endef
+LEGACY_DEVICES += AP2600I
+
+define LegacyDevice/AP2600IFM
+  DEVICE_TITLE := Comba MASELink AP2600-IFM board
+  DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-storage
+endef
+LEGACY_DEVICES += AP2600IFM

target/linux/ar71xx/image/legacy.mk

@@ -275,6 +275,7 @@ wndr4300_mtdlayout=mtdparts=ar934x-nfc:256k(u-boot)ro,256k(u-boot-env)ro,256k(ca
 zcn1523h_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6208k(rootfs),1472k(kernel),64k(configure)ro,64k(mfg)ro,64k(art)ro,7680k@0x50000(firmware)
 mynet_rext_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,7808k(firmware),64k(nvram)ro,64k(ART)ro
 zyx_nbg6716_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(env)ro,64k(RFdata)ro,-(nbu);ar934x-nfc:2048k(zyxel_rfsd),2048k(romd),1024k(header),2048k(kernel),-(ubi)
+ap2600ifm_256kblk_mtdlayout=mtdparts=spi0.0:256k(breed)ro,256k(breed-env)ro,1536k(kernel),14336k(rootfs),15872k@0x80000(firmware)
 
 define Image/BuildKernel
 	cp $(KDIR)/vmlinux.elf $(VMLINUX).elf
@@ -1005,6 +1006,9 @@ $(eval $(call SingleProfile,Zcomax,64k,ZCN1523H516,zcn-1523h-5-16,ZCN-1523H-5,tt
 
 $(eval $(call SingleProfile,ZyXEL,64k,NBG_460N_550N_550NH,nbg460n_550n_550nh,NBG460N,ttyS0,115200,NBG-460N))
 $(eval $(call SingleProfile,AthLzma,64k,SGRW500N85BV2,sgr-w500-n85b-v2,SGRW500N85BV2,ttyS0,115200,$$(ap147_mtdlayout),RKuImage))
+$(eval $(call SingleProfile,AthLzma,64k,SGRW500EBIFITV3,sgr-w500-ebi-fit-v3,SGRW500EBIFITV3,ttyS0,115200,$$(ap96_mtdlayout),RKuImage))
+$(eval $(call SingleProfile,AthLzma,64k,AP2600I,maselink-ap2600i,AP2600I,ttyS0,115200,$$(ap147_mtdlayout),RKuImage))
+$(eval $(call SingleProfile,AthLzma,256k,AP2600IFM,maselink-ap2600ifm,AP2600IFM,ttyS0,115200,$$(ap2600ifm_256kblk_mtdlayout) ahbskip=1,KRuImage))
 
 endif # ifeq ($(SUBTARGET),generic)