Nanako/DHDAXCW-Rockchip-OpenWrt
1
0
Fork 0
Code Issues Pull Requests Actions 1 Packages Projects Releases Wiki Activity

fix PHICOMM K3 support

Browse Source
This commit is contained in:
coolsnowwolf 2018-08-24 12:39:58 +08:00
parent e6ef0d1d73
commit 89c817a034
208 changed files with 1986 additions and 22183 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

6
target/linux/bcm53xx/base-files/etc/board.d/02_network
View File

@ -24,12 +24,6 @@ buffalo,wzr-1750dhp)
board_config_flush
exit 0
;;
phicomm,k3)
ucidef_add_switch "switch0" \
"0:lan:2" "1:lan:1" "2:lan:3" "3:wan:4" "5t@eth0"
board_config_flush
exit 0
;;
esac
wan_macaddr="$(nvram get wan_hwaddr)"

2
target/linux/bcm53xx/base-files/lib/upgrade/platform.sh
View File

@ -327,7 +327,7 @@ platform_do_upgrade() {
case "$file_type" in
"chk") cmd=$(platform_trx_from_chk_cmd "$trx");;
"cybertan") cmd=$(platform_trx_from_cybertan_cmd "$trx");;
"safeloader") trx=$(platform_img_from_safeloader "$trx");;
"safeloader") trx=$(platform_img_from_safeloader "$trx"); PART_NAME=os-image;;
"seama") trx=$(platform_img_from_seama "$trx");;
esac

14
target/linux/bcm53xx/config-4.14
View File

@ -29,7 +29,6 @@ CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
# CONFIG_ARCH_WANTS_THP_SWAP is not set
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
CONFIG_ARM=y
@ -128,19 +127,14 @@ CONFIG_DEBUG_UART_PHYS=0x18000300
CONFIG_DEBUG_UART_VIRT=0xf1000300
CONFIG_DEBUG_UNCOMPRESS=y
CONFIG_DEBUG_USER=y
# CONFIG_DMA_NOOP_OPS is not set
# CONFIG_DMA_VIRT_OPS is not set
# CONFIG_DRM_LIB_RANDOM is not set
CONFIG_DTC=y
CONFIG_EARLY_PRINTK=y
CONFIG_EDAC_ATOMIC_SCRUB=y
CONFIG_EDAC_SUPPORT=y
CONFIG_EXPORTFS=y
CONFIG_EXTCON=y
CONFIG_FIXED_PHY=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_FRAME_POINTER=y
CONFIG_FUTEX_PI=y
# CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_GENERIC_ARCH_TOPOLOGY=y
@ -233,9 +227,11 @@ CONFIG_LIBFDT=y
CONFIG_LOCK_SPIN_ON_OWNER=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
# CONFIG_MDIO_BCM_IPROC is not set
CONFIG_MDIO_BCM_IPROC=y
CONFIG_MDIO_BUS=y
CONFIG_MDIO_BUS_MUX=y
# CONFIG_MDIO_BUS_MUX_BCM_IPROC is not set
CONFIG_MDIO_BUS_MUX_MMIOREG=y
CONFIG_MDIO_DEVICE=y
CONFIG_MFD_SYSCON=y
CONFIG_MIGHT_HAVE_CACHE_L2X0=y
@ -320,7 +316,8 @@ CONFIG_SMP=y
CONFIG_SMP_ON_UP=y
CONFIG_SPARSE_IRQ=y
CONFIG_SPI=y
CONFIG_SPI_BCM53XX=y
# CONFIG_SPI_BCM53XX is not set
CONFIG_SPI_BCM_QSPI=y
CONFIG_SPI_BITBANG=y
CONFIG_SPI_GPIO=y
CONFIG_SPI_MASTER=y
@ -340,7 +337,6 @@ CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
CONFIG_THERMAL_GOV_STEP_WISE=y
CONFIG_THERMAL_OF=y
CONFIG_THIN_ARCHIVES=y
# CONFIG_THUMB2_KERNEL is not set
CONFIG_TICK_CPU_ACCOUNTING=y
CONFIG_TIMER_OF=y

339
target/linux/bcm53xx/config-4.4
View File

@ -1,339 +0,0 @@
CONFIG_ALIGNMENT_TRAP=y
CONFIG_ARCH_BCM=y
# CONFIG_ARCH_BCM_21664 is not set
# CONFIG_ARCH_BCM_281XX is not set
CONFIG_ARCH_BCM_5301X=y
CONFIG_ARCH_BCM_53573=y
# CONFIG_ARCH_BCM_63XX is not set
# CONFIG_ARCH_BCM_CYGNUS is not set
CONFIG_ARCH_BCM_IPROC=y
# CONFIG_ARCH_BCM_NSP is not set
# CONFIG_ARCH_BRCMSTB is not set
CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
CONFIG_ARCH_HAS_SG_CHAIN=y
CONFIG_ARCH_HAS_TICK_BROADCAST=y
CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
CONFIG_ARCH_MULTIPLATFORM=y
# CONFIG_ARCH_MULTI_CPU_AUTO is not set
CONFIG_ARCH_MULTI_V6_V7=y
CONFIG_ARCH_MULTI_V7=y
CONFIG_ARCH_NR_GPIO=0
CONFIG_ARCH_REQUIRE_GPIOLIB=y
# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_ARM=y
CONFIG_ARM_AMBA=y
CONFIG_ARM_APPENDED_DTB=y
CONFIG_ARM_ARCH_TIMER=y
CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y
# CONFIG_ARM_ATAG_DTB_COMPAT is not set
# CONFIG_ARM_CPU_SUSPEND is not set
CONFIG_ARM_ERRATA_754322=y
CONFIG_ARM_ERRATA_764369=y
CONFIG_ARM_ERRATA_775420=y
CONFIG_ARM_GIC=y
CONFIG_ARM_GLOBAL_TIMER=y
CONFIG_ARM_HAS_SG_CHAIN=y
CONFIG_ARM_HEAVY_MB=y
CONFIG_ARM_L1_CACHE_SHIFT=6
CONFIG_ARM_L1_CACHE_SHIFT_6=y
# CONFIG_ARM_LPAE is not set
CONFIG_ARM_PATCH_PHYS_VIRT=y
# CONFIG_ARM_SP805_WATCHDOG is not set
CONFIG_ARM_THUMB=y
# CONFIG_ARM_THUMBEE is not set
CONFIG_ARM_VIRT_EXT=y
CONFIG_ATAGS=y
CONFIG_AUTO_ZRELADDR=y
CONFIG_BCM47XX_NVRAM=y
CONFIG_BCM47XX_SPROM=y
CONFIG_BCM47XX_WDT=y
CONFIG_BCMA=y
CONFIG_BCMA_BLOCKIO=y
CONFIG_BCMA_DEBUG=y
CONFIG_BCMA_DRIVER_GMAC_CMN=y
CONFIG_BCMA_DRIVER_GPIO=y
CONFIG_BCMA_DRIVER_PCI=y
CONFIG_BCMA_HOST_PCI=y
CONFIG_BCMA_HOST_PCI_POSSIBLE=y
CONFIG_BCMA_HOST_SOC=y
CONFIG_BCMA_SFLASH=y
CONFIG_BCM_NET_PHYLIB=y
CONFIG_BCM_NS_THERMAL=y
CONFIG_BGMAC=y
CONFIG_BGMAC_BCMA=y
# CONFIG_BGMAC_PLATFORM is not set
CONFIG_BOUNCE=y
CONFIG_BROADCOM_PHY=y
CONFIG_CACHE_L2X0=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_CLKDEV_LOOKUP=y
CONFIG_CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK=y
CONFIG_CLKSRC_MMIO=y
CONFIG_CLKSRC_OF=y
CONFIG_CLKSRC_PROBE=y
CONFIG_CLONE_BACKWARDS=y
CONFIG_COMMON_CLK=y
CONFIG_COMMON_CLK_IPROC=y
CONFIG_CPU_32v6K=y
CONFIG_CPU_32v7=y
CONFIG_CPU_ABRT_EV7=y
# CONFIG_CPU_BPREDICT_DISABLE is not set
CONFIG_CPU_CACHE_V7=y
CONFIG_CPU_CACHE_VIPT=y
CONFIG_CPU_COPY_V6=y
CONFIG_CPU_CP15=y
CONFIG_CPU_CP15_MMU=y
CONFIG_CPU_HAS_ASID=y
# CONFIG_CPU_ICACHE_DISABLE is not set
CONFIG_CPU_PABRT_V7=y
CONFIG_CPU_RMAP=y
CONFIG_CPU_TLB_V7=y
CONFIG_CPU_V7=y
CONFIG_CRC16=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_LZO=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_NULL2=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_DCACHE_WORD_ACCESS=y
CONFIG_DEBUG_BCM_5301X=y
CONFIG_DEBUG_INFO=y
CONFIG_DEBUG_LL=y
CONFIG_DEBUG_LL_INCLUDE="debug/8250.S"
CONFIG_DEBUG_UART_8250=y
# CONFIG_DEBUG_UART_8250_FLOW_CONTROL is not set
CONFIG_DEBUG_UART_8250_SHIFT=0
CONFIG_DEBUG_UART_PHYS=0x18000300
CONFIG_DEBUG_UART_VIRT=0xf1000300
CONFIG_DEBUG_UNCOMPRESS=y
CONFIG_DEBUG_USER=y
CONFIG_DTC=y
CONFIG_EARLY_PRINTK=y
CONFIG_EDAC_ATOMIC_SCRUB=y
CONFIG_EDAC_SUPPORT=y
CONFIG_FIXED_PHY=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_FRAME_POINTER=y
# CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_IDLE_POLL_SETUP=y
CONFIG_GENERIC_IO=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_PINCONF=y
CONFIG_GENERIC_SCHED_CLOCK=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GPIOLIB=y
CONFIG_GPIOLIB_IRQCHIP=y
CONFIG_GPIO_74X164=y
CONFIG_GPIO_DEVRES=y
CONFIG_GPIO_SYSFS=y
CONFIG_HANDLE_DOMAIN_IRQ=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_HAS_DMA=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
CONFIG_HAVE_ARCH_AUDITSYSCALL=y
CONFIG_HAVE_ARCH_BITREVERSE=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_HAVE_ARCH_PFN_VALID=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_ARM_ARCH_TIMER=y
CONFIG_HAVE_ARM_SCU=y
CONFIG_HAVE_ARM_TWD=y
# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
CONFIG_HAVE_BPF_JIT=y
CONFIG_HAVE_CC_STACKPROTECTOR=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_HAVE_CONTEXT_TRACKING=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_HAVE_DEBUG_KMEMLEAK=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_HAVE_IDE=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_HAVE_NET_DSA=y
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_PROC_CPU=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_SMP=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_UID16=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_HIGHMEM=y
# CONFIG_HIGHPTE is not set
CONFIG_HZ_FIXED=0
CONFIG_HZ_PERIODIC=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_IOMMU_HELPER=y
CONFIG_IRQCHIP=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_DOMAIN_HIERARCHY=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_IRQ_WORK=y
CONFIG_LIBFDT=y
CONFIG_LOCK_SPIN_ON_OWNER=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
# CONFIG_MDIO_BCM_IPROC is not set
CONFIG_MDIO_BOARDINFO=y
CONFIG_MFD_SYSCON=y
CONFIG_MIGHT_HAVE_CACHE_L2X0=y
CONFIG_MIGHT_HAVE_PCI=y
CONFIG_MODULES_USE_ELF_REL=y
CONFIG_MTD_BCM47XXSFLASH=y
CONFIG_MTD_BCM47XX_PARTS=y
CONFIG_MTD_M25P80=y
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_BRCMNAND=y
CONFIG_MTD_NAND_ECC=y
# CONFIG_MTD_PHYSMAP_OF is not set
CONFIG_MTD_SPI_NOR=y
CONFIG_MTD_SPLIT_FIRMWARE=y
CONFIG_MTD_SPLIT_SEAMA_FW=y
CONFIG_MTD_UBI=y
CONFIG_MTD_UBI_BEB_LIMIT=20
CONFIG_MTD_UBI_BLOCK=y
# CONFIG_MTD_UBI_FASTMAP is not set
# CONFIG_MTD_UBI_GLUEBI is not set
CONFIG_MTD_UBI_WL_THRESHOLD=4096
CONFIG_MULTI_IRQ_HANDLER=y
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NET_FLOW_LIMIT=y
CONFIG_NO_BOOTMEM=y
CONFIG_NR_CPUS=2
CONFIG_OF=y
CONFIG_OF_ADDRESS=y
CONFIG_OF_ADDRESS_PCI=y
CONFIG_OF_EARLY_FLATTREE=y
CONFIG_OF_FLATTREE=y
CONFIG_OF_GPIO=y
CONFIG_OF_IRQ=y
CONFIG_OF_MDIO=y
CONFIG_OF_MTD=y
CONFIG_OF_NET=y
CONFIG_OF_PCI=y
CONFIG_OF_PCI_IRQ=y
CONFIG_OF_RESERVED_MEM=y
CONFIG_OLD_SIGACTION=y
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_OUTER_CACHE=y
CONFIG_OUTER_CACHE_SYNC=y
CONFIG_PADATA=y
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_PCI=y
CONFIG_PCIE_IPROC=y
CONFIG_PCIE_IPROC_BCMA=y
# CONFIG_PCIE_IPROC_PLATFORM is not set
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_DOMAINS_GENERIC=y
CONFIG_PERF_USE_VMALLOC=y
CONFIG_PGTABLE_LEVELS=2
CONFIG_PHYLIB=y
# CONFIG_PHY_BCM_NS_USB2 is not set
# CONFIG_PHY_BCM_NS_USB3 is not set
CONFIG_PINCTRL=y
# CONFIG_PL310_ERRATA_588369 is not set
# CONFIG_PL310_ERRATA_727915 is not set
# CONFIG_PL310_ERRATA_753970 is not set
# CONFIG_PL310_ERRATA_769419 is not set
CONFIG_RATIONAL=y
CONFIG_RCU_STALL_COMMON=y
CONFIG_REGMAP=y
CONFIG_REGMAP_MMIO=y
CONFIG_RFS_ACCEL=y
CONFIG_RPS=y
CONFIG_RWSEM_SPIN_ON_OWNER=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
# CONFIG_SCHED_INFO is not set
# CONFIG_SCSI_DMA is not set
CONFIG_SERIAL_8250_FSL=y
# CONFIG_SERIAL_AMBA_PL010 is not set
# CONFIG_SERIAL_AMBA_PL011 is not set
CONFIG_SERIAL_OF_PLATFORM=y
CONFIG_SMP=y
CONFIG_SMP_ON_UP=y
CONFIG_SPARSE_IRQ=y
CONFIG_SPI=y
CONFIG_SPI_BCM53XX=y
# CONFIG_SPI_BCM_QSPI is not set
CONFIG_SPI_BITBANG=y
CONFIG_SPI_GPIO=y
CONFIG_SPI_MASTER=y
CONFIG_SRCU=y
CONFIG_SWCONFIG=y
CONFIG_SWCONFIG_B53=y
# CONFIG_SWCONFIG_B53_MMAP_DRIVER is not set
CONFIG_SWCONFIG_B53_PHY_DRIVER=y
CONFIG_SWCONFIG_B53_PHY_FIXUP=y
CONFIG_SWCONFIG_B53_SRAB_DRIVER=y
CONFIG_SWIOTLB=y
CONFIG_SWP_EMULATE=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_THERMAL=y
CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
CONFIG_THERMAL_GOV_STEP_WISE=y
CONFIG_THERMAL_OF=y
# CONFIG_THUMB2_KERNEL is not set
CONFIG_TICK_CPU_ACCOUNTING=y
CONFIG_TREE_RCU=y
CONFIG_UBIFS_FS=y
# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
CONFIG_UBIFS_FS_LZO=y
CONFIG_UBIFS_FS_ZLIB=y
CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
CONFIG_USB_SUPPORT=y
CONFIG_USE_OF=y
CONFIG_VECTORS_BASE=0xffff0000
# CONFIG_VFP is not set
CONFIG_WATCHDOG_CORE=y
CONFIG_XPS=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_BCJ=y
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZLIB_DEFLATE=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZONE_DMA_FLAG=0

339
target/linux/bcm53xx/config-4.9
View File

@ -1,339 +0,0 @@
CONFIG_ALIGNMENT_TRAP=y
CONFIG_ARCH_BCM=y
CONFIG_ARCH_BCM_5301X=y
CONFIG_ARCH_BCM_53573=y
CONFIG_ARCH_BCM_IPROC=y
CONFIG_ARCH_CLOCKSOURCE_DATA=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
CONFIG_ARCH_HAS_SG_CHAIN=y
CONFIG_ARCH_HAS_TICK_BROADCAST=y
CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
CONFIG_ARCH_MULTIPLATFORM=y
# CONFIG_ARCH_MULTI_CPU_AUTO is not set
CONFIG_ARCH_MULTI_V6_V7=y
CONFIG_ARCH_MULTI_V7=y
CONFIG_ARCH_NR_GPIO=0
# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
CONFIG_ARM=y
CONFIG_ARM_AMBA=y
CONFIG_ARM_APPENDED_DTB=y
CONFIG_ARM_ARCH_TIMER=y
CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y
# CONFIG_ARM_ATAG_DTB_COMPAT is not set
# CONFIG_ARM_CPU_SUSPEND is not set
CONFIG_ARM_ERRATA_754322=y
CONFIG_ARM_ERRATA_764369=y
CONFIG_ARM_ERRATA_775420=y
CONFIG_ARM_GIC=y
CONFIG_ARM_GLOBAL_TIMER=y
CONFIG_ARM_HAS_SG_CHAIN=y
CONFIG_ARM_HEAVY_MB=y
CONFIG_ARM_L1_CACHE_SHIFT=6
CONFIG_ARM_L1_CACHE_SHIFT_6=y
# CONFIG_ARM_LPAE is not set
CONFIG_ARM_PATCH_IDIV=y
CONFIG_ARM_PATCH_PHYS_VIRT=y
# CONFIG_ARM_SP805_WATCHDOG is not set
CONFIG_ARM_THUMB=y
# CONFIG_ARM_THUMBEE is not set
CONFIG_ARM_VIRT_EXT=y
CONFIG_ATAGS=y
CONFIG_AUTO_ZRELADDR=y
CONFIG_BCM47XX_NVRAM=y
CONFIG_BCM47XX_SPROM=y
CONFIG_BCM47XX_WDT=y
CONFIG_BCMA=y
CONFIG_BCMA_BLOCKIO=y
CONFIG_BCMA_DEBUG=y
CONFIG_BCMA_DRIVER_GMAC_CMN=y
CONFIG_BCMA_DRIVER_GPIO=y
CONFIG_BCMA_DRIVER_PCI=y
CONFIG_BCMA_HOST_PCI=y
CONFIG_BCMA_HOST_PCI_POSSIBLE=y
CONFIG_BCMA_HOST_SOC=y
CONFIG_BCMA_SFLASH=y
CONFIG_BCM_NET_PHYLIB=y
CONFIG_BCM_NS_THERMAL=y
CONFIG_BGMAC=y
CONFIG_BGMAC_BCMA=y
# CONFIG_BGMAC_PLATFORM is not set
# CONFIG_BINFMT_FLAT is not set
CONFIG_BLK_MQ_PCI=y
CONFIG_BOUNCE=y
CONFIG_BROADCOM_PHY=y
CONFIG_CACHE_L2X0=y
CONFIG_CLKDEV_LOOKUP=y
CONFIG_CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK=y
CONFIG_CLKSRC_MMIO=y
CONFIG_CLKSRC_OF=y
CONFIG_CLKSRC_PROBE=y
# CONFIG_CLK_BCM_NS2 is not set
CONFIG_CLK_BCM_NSP=y
CONFIG_CLONE_BACKWARDS=y
CONFIG_COMMON_CLK=y
CONFIG_COMMON_CLK_IPROC=y
CONFIG_CPU_32v6K=y
CONFIG_CPU_32v7=y
CONFIG_CPU_ABRT_EV7=y
# CONFIG_CPU_BPREDICT_DISABLE is not set
CONFIG_CPU_CACHE_V7=y
CONFIG_CPU_CACHE_VIPT=y
CONFIG_CPU_COPY_V6=y
CONFIG_CPU_CP15=y
CONFIG_CPU_CP15_MMU=y
CONFIG_CPU_HAS_ASID=y
# CONFIG_CPU_ICACHE_DISABLE is not set
CONFIG_CPU_PABRT_V7=y
CONFIG_CPU_RMAP=y
CONFIG_CPU_TLB_V7=y
CONFIG_CPU_V7=y
CONFIG_CRC16=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_LZO=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_NULL2=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_DCACHE_WORD_ACCESS=y
CONFIG_DEBUG_BCM_5301X=y
CONFIG_DEBUG_INFO=y
CONFIG_DEBUG_LL=y
CONFIG_DEBUG_LL_INCLUDE="debug/8250.S"
CONFIG_DEBUG_UART_8250=y
# CONFIG_DEBUG_UART_8250_FLOW_CONTROL is not set
CONFIG_DEBUG_UART_8250_SHIFT=0
CONFIG_DEBUG_UART_PHYS=0x18000300
CONFIG_DEBUG_UART_VIRT=0xf1000300
CONFIG_DEBUG_UNCOMPRESS=y
CONFIG_DEBUG_USER=y
CONFIG_DTC=y
CONFIG_EARLY_PRINTK=y
CONFIG_EDAC_ATOMIC_SCRUB=y
CONFIG_EDAC_SUPPORT=y
CONFIG_FIXED_PHY=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_FRAME_POINTER=y
# CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_EARLY_IOREMAP=y
CONFIG_GENERIC_IDLE_POLL_SETUP=y
CONFIG_GENERIC_IO=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_PINCONF=y
CONFIG_GENERIC_SCHED_CLOCK=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GPIOLIB=y
CONFIG_GPIOLIB_IRQCHIP=y
CONFIG_GPIO_74X164=y
CONFIG_GPIO_SYSFS=y
CONFIG_HANDLE_DOMAIN_IRQ=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_HAS_DMA=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
CONFIG_HAVE_ARCH_AUDITSYSCALL=y
CONFIG_HAVE_ARCH_BITREVERSE=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_HAVE_ARCH_PFN_VALID=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_ARM_ARCH_TIMER=y
CONFIG_HAVE_ARM_SCU=y
CONFIG_HAVE_ARM_SMCCC=y
CONFIG_HAVE_ARM_TWD=y
# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
CONFIG_HAVE_CBPF_JIT=y
CONFIG_HAVE_CC_STACKPROTECTOR=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_HAVE_CONTEXT_TRACKING=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_HAVE_DEBUG_KMEMLEAK=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_HAVE_IDE=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_HAVE_NET_DSA=y
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_PROC_CPU=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_SMP=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_UID16=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_HIGHMEM=y
# CONFIG_HIGHPTE is not set
CONFIG_HZ_FIXED=0
CONFIG_HZ_PERIODIC=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_IOMMU_HELPER=y
CONFIG_IRQCHIP=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_DOMAIN_HIERARCHY=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_IRQ_WORK=y
CONFIG_LIBFDT=y
CONFIG_LOCK_SPIN_ON_OWNER=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
# CONFIG_MDIO_BCM_IPROC is not set
CONFIG_MDIO_BOARDINFO=y
# CONFIG_MDIO_BUS_MUX_BCM_IPROC is not set
CONFIG_MFD_SYSCON=y
CONFIG_MIGHT_HAVE_CACHE_L2X0=y
CONFIG_MIGHT_HAVE_PCI=y
CONFIG_MODULES_USE_ELF_REL=y
CONFIG_MTD_BCM47XXSFLASH=y
CONFIG_MTD_BCM47XX_PARTS=y
CONFIG_MTD_M25P80=y
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_BRCMNAND=y
CONFIG_MTD_NAND_ECC=y
CONFIG_MTD_PARSER_TRX=y
# CONFIG_MTD_PHYSMAP_OF is not set
CONFIG_MTD_SPI_NOR=y
CONFIG_MTD_SPLIT_FIRMWARE=y
CONFIG_MTD_SPLIT_SEAMA_FW=y
CONFIG_MTD_UBI=y
CONFIG_MTD_UBI_BEB_LIMIT=20
CONFIG_MTD_UBI_BLOCK=y
# CONFIG_MTD_UBI_FASTMAP is not set
# CONFIG_MTD_UBI_GLUEBI is not set
CONFIG_MTD_UBI_WL_THRESHOLD=4096
CONFIG_MULTI_IRQ_HANDLER=y
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NET_FLOW_LIMIT=y
CONFIG_NO_BOOTMEM=y
CONFIG_NR_CPUS=2
CONFIG_OF=y
CONFIG_OF_ADDRESS=y
CONFIG_OF_ADDRESS_PCI=y
CONFIG_OF_EARLY_FLATTREE=y
CONFIG_OF_FLATTREE=y
CONFIG_OF_GPIO=y
CONFIG_OF_IRQ=y
CONFIG_OF_MDIO=y
CONFIG_OF_NET=y
CONFIG_OF_PCI=y
CONFIG_OF_PCI_IRQ=y
CONFIG_OF_RESERVED_MEM=y
CONFIG_OLD_SIGACTION=y
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_OUTER_CACHE=y
CONFIG_OUTER_CACHE_SYNC=y
CONFIG_PADATA=y
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_PCI=y
CONFIG_PCIE_IPROC=y
CONFIG_PCIE_IPROC_BCMA=y
# CONFIG_PCIE_IPROC_PLATFORM is not set
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_DOMAINS_GENERIC=y
CONFIG_PERF_USE_VMALLOC=y
CONFIG_PGTABLE_LEVELS=2
CONFIG_PHYLIB=y
# CONFIG_PHY_BCM_NS_USB2 is not set
# CONFIG_PHY_BCM_NS_USB3 is not set
# CONFIG_PHY_BRCM_SATA is not set
CONFIG_PINCTRL=y
# CONFIG_PINCTRL_IPROC_GPIO is not set
# CONFIG_PINCTRL_NS2_MUX is not set
# CONFIG_PL310_ERRATA_588369 is not set
# CONFIG_PL310_ERRATA_727915 is not set
# CONFIG_PL310_ERRATA_753970 is not set
# CONFIG_PL310_ERRATA_769419 is not set
CONFIG_RATIONAL=y
CONFIG_RCU_STALL_COMMON=y
CONFIG_REGMAP=y
CONFIG_REGMAP_MMIO=y
CONFIG_RFS_ACCEL=y
CONFIG_RPS=y
CONFIG_RWSEM_SPIN_ON_OWNER=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
# CONFIG_SCHED_INFO is not set
# CONFIG_SCSI_DMA is not set
CONFIG_SERIAL_8250_FSL=y
# CONFIG_SERIAL_AMBA_PL010 is not set
# CONFIG_SERIAL_AMBA_PL011 is not set
CONFIG_SERIAL_OF_PLATFORM=y
CONFIG_SMP=y
CONFIG_SMP_ON_UP=y
CONFIG_SPARSE_IRQ=y
CONFIG_SPI=y
CONFIG_SPI_BCM53XX=y
CONFIG_SPI_BITBANG=y
# CONFIG_SPI_CADENCE_QUADSPI is not set
CONFIG_SPI_GPIO=y
CONFIG_SPI_MASTER=y
CONFIG_SRCU=y
CONFIG_SWCONFIG=y
CONFIG_SWCONFIG_B53=y
# CONFIG_SWCONFIG_B53_MMAP_DRIVER is not set
CONFIG_SWCONFIG_B53_PHY_DRIVER=y
CONFIG_SWCONFIG_B53_PHY_FIXUP=y
CONFIG_SWCONFIG_B53_SRAB_DRIVER=y
CONFIG_SWIOTLB=y
CONFIG_SWPHY=y
CONFIG_SWP_EMULATE=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_THERMAL=y
CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
CONFIG_THERMAL_GOV_STEP_WISE=y
CONFIG_THERMAL_OF=y
# CONFIG_THUMB2_KERNEL is not set
CONFIG_TICK_CPU_ACCOUNTING=y
CONFIG_TREE_RCU=y
CONFIG_UBIFS_FS=y
# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
CONFIG_UBIFS_FS_LZO=y
CONFIG_UBIFS_FS_ZLIB=y
CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
CONFIG_USB_SUPPORT=y
CONFIG_USE_OF=y
CONFIG_VECTORS_BASE=0xffff0000
# CONFIG_VFP is not set
CONFIG_WATCHDOG_CORE=y
CONFIG_XPS=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_BCJ=y
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZLIB_DEFLATE=y
CONFIG_ZLIB_INFLATE=y

737
target/linux/bcm53xx/files-4.4/drivers/firmware/broadcom/bcm47xx_sprom.c
View File

@ -1,737 +0,0 @@
/*
* Copyright (C) 2004 Florian Schirmer <jolt@tuxbox.org>
* Copyright (C) 2006 Felix Fietkau <nbd@nbd.name>
* Copyright (C) 2006 Michael Buesch <m@bues.ch>
* Copyright (C) 2010 Waldemar Brodkorb <wbx@openadk.org>
* Copyright (C) 2010-2012 Hauke Mehrtens <hauke@hauke-m.de>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/bcm47xx_nvram.h>
#include <linux/bcma/bcma.h>
#include <linux/etherdevice.h>
#include <linux/if_ether.h>
#include <linux/ssb/ssb.h>
static void create_key(const char *prefix, const char *postfix,
const char *name, char *buf, int len)
{
if (prefix && postfix)
snprintf(buf, len, "%s%s%s", prefix, name, postfix);
else if (prefix)
snprintf(buf, len, "%s%s", prefix, name);
else if (postfix)
snprintf(buf, len, "%s%s", name, postfix);
else
snprintf(buf, len, "%s", name);
}
static int get_nvram_var(const char *prefix, const char *postfix,
const char *name, char *buf, int len, bool fallback)
{
char key[40];
int err;
create_key(prefix, postfix, name, key, sizeof(key));
err = bcm47xx_nvram_getenv(key, buf, len);
if (fallback && err == -ENOENT && prefix) {
create_key(NULL, postfix, name, key, sizeof(key));
err = bcm47xx_nvram_getenv(key, buf, len);
}
return err;
}
#define NVRAM_READ_VAL(type) \
static void nvram_read_ ## type(const char *prefix, \
const char *postfix, const char *name, \
type *val, type allset, bool fallback) \
{ \
char buf[100]; \
int err; \
type var; \
\
err = get_nvram_var(prefix, postfix, name, buf, sizeof(buf), \
fallback); \
if (err < 0) \
return; \
err = kstrto ## type(strim(buf), 0, &var); \
if (err) { \
pr_warn("can not parse nvram name %s%s%s with value %s got %i\n", \
prefix, name, postfix, buf, err); \
return; \
} \
if (allset && var == allset) \
return; \
*val = var; \
}
NVRAM_READ_VAL(u8)
NVRAM_READ_VAL(s8)
NVRAM_READ_VAL(u16)
NVRAM_READ_VAL(u32)
#undef NVRAM_READ_VAL
static void nvram_read_u32_2(const char *prefix, const char *name,
u16 *val_lo, u16 *val_hi, bool fallback)
{
char buf[100];
int err;
u32 val;
err = get_nvram_var(prefix, NULL, name, buf, sizeof(buf), fallback);
if (err < 0)
return;
err = kstrtou32(strim(buf), 0, &val);
if (err) {
pr_warn("can not parse nvram name %s%s with value %s got %i\n",
prefix, name, buf, err);
return;
}
*val_lo = (val & 0x0000FFFFU);
*val_hi = (val & 0xFFFF0000U) >> 16;
}
static void nvram_read_leddc(const char *prefix, const char *name,
u8 *leddc_on_time, u8 *leddc_off_time,
bool fallback)
{
char buf[100];
int err;
u32 val;
err = get_nvram_var(prefix, NULL, name, buf, sizeof(buf), fallback);
if (err < 0)
return;
err = kstrtou32(strim(buf), 0, &val);
if (err) {
pr_warn("can not parse nvram name %s%s with value %s got %i\n",
prefix, name, buf, err);
return;
}
if (val == 0xffff || val == 0xffffffff)
return;
*leddc_on_time = val & 0xff;
*leddc_off_time = (val >> 16) & 0xff;
}
static void bcm47xx_nvram_parse_macaddr(char *buf, u8 macaddr[6])
{
if (strchr(buf, ':'))
sscanf(buf, "%hhx:%hhx:%hhx:%hhx:%hhx:%hhx", &macaddr[0],
&macaddr[1], &macaddr[2], &macaddr[3], &macaddr[4],
&macaddr[5]);
else if (strchr(buf, '-'))
sscanf(buf, "%hhx-%hhx-%hhx-%hhx-%hhx-%hhx", &macaddr[0],
&macaddr[1], &macaddr[2], &macaddr[3], &macaddr[4],
&macaddr[5]);
else
pr_warn("Can not parse mac address: %s\n", buf);
}
static void nvram_read_macaddr(const char *prefix, const char *name,
u8 val[6], bool fallback)
{
char buf[100];
int err;
err = get_nvram_var(prefix, NULL, name, buf, sizeof(buf), fallback);
if (err < 0)
return;
bcm47xx_nvram_parse_macaddr(buf, val);
}
static void nvram_read_alpha2(const char *prefix, const char *name,
char val[2], bool fallback)
{
char buf[10];
int err;
err = get_nvram_var(prefix, NULL, name, buf, sizeof(buf), fallback);
if (err < 0)
return;
if (buf[0] == '0')
return;
if (strlen(buf) > 2) {
pr_warn("alpha2 is too long %s\n", buf);
return;
}
memcpy(val, buf, 2);
}
/* This is one-function-only macro, it uses local "sprom" variable! */
#define ENTRY(_revmask, _type, _prefix, _name, _val, _allset, _fallback) \
if (_revmask & BIT(sprom->revision)) \
nvram_read_ ## _type(_prefix, NULL, _name, &sprom->_val, \
_allset, _fallback)
/*
* Special version of filling function that can be safely called for any SPROM
* revision. For every NVRAM to SPROM mapping it contains bitmask of revisions
* for which the mapping is valid.
* It obviously requires some hexadecimal/bitmasks knowledge, but allows
* writing cleaner code (easy revisions handling).
* Note that while SPROM revision 0 was never used, we still keep BIT(0)
* reserved for it, just to keep numbering sane.
*/
static void bcm47xx_sprom_fill_auto(struct ssb_sprom *sprom,
const char *prefix, bool fallback)
{
const char *pre = prefix;
bool fb = fallback;
/* Broadcom extracts it for rev 8+ but it was found on 2 and 4 too */
ENTRY(0xfffffffe, u16, pre, "devid", dev_id, 0, fallback);
ENTRY(0xfffffffe, u16, pre, "boardrev", board_rev, 0, true);
ENTRY(0xfffffffe, u32, pre, "boardflags", boardflags, 0, fb);
ENTRY(0xfffffff0, u32, pre, "boardflags2", boardflags2, 0, fb);
ENTRY(0xfffff800, u32, pre, "boardflags3", boardflags3, 0, fb);
ENTRY(0x00000002, u16, pre, "boardflags", boardflags_lo, 0, fb);
ENTRY(0xfffffffc, u16, pre, "boardtype", board_type, 0, true);
ENTRY(0xfffffffe, u16, pre, "boardnum", board_num, 0, fb);
ENTRY(0x00000002, u8, pre, "cc", country_code, 0, fb);
ENTRY(0xfffffff8, u8, pre, "regrev", regrev, 0, fb);
ENTRY(0xfffffffe, u8, pre, "ledbh0", gpio0, 0xff, fb);
ENTRY(0xfffffffe, u8, pre, "ledbh1", gpio1, 0xff, fb);
ENTRY(0xfffffffe, u8, pre, "ledbh2", gpio2, 0xff, fb);
ENTRY(0xfffffffe, u8, pre, "ledbh3", gpio3, 0xff, fb);
ENTRY(0x0000070e, u16, pre, "pa0b0", pa0b0, 0, fb);
ENTRY(0x0000070e, u16, pre, "pa0b1", pa0b1, 0, fb);
ENTRY(0x0000070e, u16, pre, "pa0b2", pa0b2, 0, fb);
ENTRY(0x0000070e, u8, pre, "pa0itssit", itssi_bg, 0, fb);
ENTRY(0x0000070e, u8, pre, "pa0maxpwr", maxpwr_bg, 0, fb);
ENTRY(0x0000070c, u8, pre, "opo", opo, 0, fb);
ENTRY(0xfffffffe, u8, pre, "aa2g", ant_available_bg, 0, fb);
ENTRY(0xfffffffe, u8, pre, "aa5g", ant_available_a, 0, fb);
ENTRY(0x000007fe, s8, pre, "ag0", antenna_gain.a0, 0, fb);
ENTRY(0x000007fe, s8, pre, "ag1", antenna_gain.a1, 0, fb);
ENTRY(0x000007f0, s8, pre, "ag2", antenna_gain.a2, 0, fb);
ENTRY(0x000007f0, s8, pre, "ag3", antenna_gain.a3, 0, fb);
ENTRY(0x0000070e, u16, pre, "pa1b0", pa1b0, 0, fb);
ENTRY(0x0000070e, u16, pre, "pa1b1", pa1b1, 0, fb);
ENTRY(0x0000070e, u16, pre, "pa1b2", pa1b2, 0, fb);
ENTRY(0x0000070c, u16, pre, "pa1lob0", pa1lob0, 0, fb);
ENTRY(0x0000070c, u16, pre, "pa1lob1", pa1lob1, 0, fb);
ENTRY(0x0000070c, u16, pre, "pa1lob2", pa1lob2, 0, fb);
ENTRY(0x0000070c, u16, pre, "pa1hib0", pa1hib0, 0, fb);
ENTRY(0x0000070c, u16, pre, "pa1hib1", pa1hib1, 0, fb);
ENTRY(0x0000070c, u16, pre, "pa1hib2", pa1hib2, 0, fb);
ENTRY(0x0000070e, u8, pre, "pa1itssit", itssi_a, 0, fb);
ENTRY(0x0000070e, u8, pre, "pa1maxpwr", maxpwr_a, 0, fb);
ENTRY(0x0000070c, u8, pre, "pa1lomaxpwr", maxpwr_al, 0, fb);
ENTRY(0x0000070c, u8, pre, "pa1himaxpwr", maxpwr_ah, 0, fb);
ENTRY(0x00000708, u8, pre, "bxa2g", bxa2g, 0, fb);
ENTRY(0x00000708, u8, pre, "rssisav2g", rssisav2g, 0, fb);
ENTRY(0x00000708, u8, pre, "rssismc2g", rssismc2g, 0, fb);
ENTRY(0x00000708, u8, pre, "rssismf2g", rssismf2g, 0, fb);
ENTRY(0x00000708, u8, pre, "bxa5g", bxa5g, 0, fb);
ENTRY(0x00000708, u8, pre, "rssisav5g", rssisav5g, 0, fb);
ENTRY(0x00000708, u8, pre, "rssismc5g", rssismc5g, 0, fb);
ENTRY(0x00000708, u8, pre, "rssismf5g", rssismf5g, 0, fb);
ENTRY(0x00000708, u8, pre, "tri2g", tri2g, 0, fb);
ENTRY(0x00000708, u8, pre, "tri5g", tri5g, 0, fb);
ENTRY(0x00000708, u8, pre, "tri5gl", tri5gl, 0, fb);
ENTRY(0x00000708, u8, pre, "tri5gh", tri5gh, 0, fb);
ENTRY(0x00000708, s8, pre, "rxpo2g", rxpo2g, 0, fb);
ENTRY(0x00000708, s8, pre, "rxpo5g", rxpo5g, 0, fb);
ENTRY(0xfffffff0, u8, pre, "txchain", txchain, 0xf, fb);
ENTRY(0xfffffff0, u8, pre, "rxchain", rxchain, 0xf, fb);
ENTRY(0xfffffff0, u8, pre, "antswitch", antswitch, 0xff, fb);
ENTRY(0x00000700, u8, pre, "tssipos2g", fem.ghz2.tssipos, 0, fb);
ENTRY(0x00000700, u8, pre, "extpagain2g", fem.ghz2.extpa_gain, 0, fb);
ENTRY(0x00000700, u8, pre, "pdetrange2g", fem.ghz2.pdet_range, 0, fb);
ENTRY(0x00000700, u8, pre, "triso2g", fem.ghz2.tr_iso, 0, fb);
ENTRY(0x00000700, u8, pre, "antswctl2g", fem.ghz2.antswlut, 0, fb);
ENTRY(0x00000700, u8, pre, "tssipos5g", fem.ghz5.tssipos, 0, fb);
ENTRY(0x00000700, u8, pre, "extpagain5g", fem.ghz5.extpa_gain, 0, fb);
ENTRY(0x00000700, u8, pre, "pdetrange5g", fem.ghz5.pdet_range, 0, fb);
ENTRY(0x00000700, u8, pre, "triso5g", fem.ghz5.tr_iso, 0, fb);
ENTRY(0x00000700, u8, pre, "antswctl5g", fem.ghz5.antswlut, 0, fb);
ENTRY(0x000000f0, u8, pre, "txpid2ga0", txpid2g[0], 0, fb);
ENTRY(0x000000f0, u8, pre, "txpid2ga1", txpid2g[1], 0, fb);
ENTRY(0x000000f0, u8, pre, "txpid2ga2", txpid2g[2], 0, fb);
ENTRY(0x000000f0, u8, pre, "txpid2ga3", txpid2g[3], 0, fb);
ENTRY(0x000000f0, u8, pre, "txpid5ga0", txpid5g[0], 0, fb);
ENTRY(0x000000f0, u8, pre, "txpid5ga1", txpid5g[1], 0, fb);
ENTRY(0x000000f0, u8, pre, "txpid5ga2", txpid5g[2], 0, fb);
ENTRY(0x000000f0, u8, pre, "txpid5ga3", txpid5g[3], 0, fb);
ENTRY(0x000000f0, u8, pre, "txpid5gla0", txpid5gl[0], 0, fb);
ENTRY(0x000000f0, u8, pre, "txpid5gla1", txpid5gl[1], 0, fb);
ENTRY(0x000000f0, u8, pre, "txpid5gla2", txpid5gl[2], 0, fb);
ENTRY(0x000000f0, u8, pre, "txpid5gla3", txpid5gl[3], 0, fb);
ENTRY(0x000000f0, u8, pre, "txpid5gha0", txpid5gh[0], 0, fb);
ENTRY(0x000000f0, u8, pre, "txpid5gha1", txpid5gh[1], 0, fb);
ENTRY(0x000000f0, u8, pre, "txpid5gha2", txpid5gh[2], 0, fb);
ENTRY(0x000000f0, u8, pre, "txpid5gha3", txpid5gh[3], 0, fb);
ENTRY(0xffffff00, u8, pre, "tempthresh", tempthresh, 0, fb);
ENTRY(0xffffff00, u8, pre, "tempoffset", tempoffset, 0, fb);
ENTRY(0xffffff00, u16, pre, "rawtempsense", rawtempsense, 0, fb);
ENTRY(0xffffff00, u8, pre, "measpower", measpower, 0, fb);
ENTRY(0xffffff00, u8, pre, "tempsense_slope", tempsense_slope, 0, fb);
ENTRY(0xffffff00, u8, pre, "tempcorrx", tempcorrx, 0, fb);
ENTRY(0xffffff00, u8, pre, "tempsense_option", tempsense_option, 0, fb);
ENTRY(0x00000700, u8, pre, "freqoffset_corr", freqoffset_corr, 0, fb);
ENTRY(0x00000700, u8, pre, "iqcal_swp_dis", iqcal_swp_dis, 0, fb);
ENTRY(0x00000700, u8, pre, "hw_iqcal_en", hw_iqcal_en, 0, fb);
ENTRY(0x00000700, u8, pre, "elna2g", elna2g, 0, fb);
ENTRY(0x00000700, u8, pre, "elna5g", elna5g, 0, fb);
ENTRY(0xffffff00, u8, pre, "phycal_tempdelta", phycal_tempdelta, 0, fb);
ENTRY(0xffffff00, u8, pre, "temps_period", temps_period, 0, fb);
ENTRY(0xffffff00, u8, pre, "temps_hysteresis", temps_hysteresis, 0, fb);
ENTRY(0xffffff00, u8, pre, "measpower1", measpower1, 0, fb);
ENTRY(0xffffff00, u8, pre, "measpower2", measpower2, 0, fb);
ENTRY(0x000001f0, u16, pre, "cck2gpo", cck2gpo, 0, fb);
ENTRY(0x000001f0, u32, pre, "ofdm2gpo", ofdm2gpo, 0, fb);
ENTRY(0x000001f0, u32, pre, "ofdm5gpo", ofdm5gpo, 0, fb);
ENTRY(0x000001f0, u32, pre, "ofdm5glpo", ofdm5glpo, 0, fb);
ENTRY(0x000001f0, u32, pre, "ofdm5ghpo", ofdm5ghpo, 0, fb);
ENTRY(0x000001f0, u16, pre, "mcs2gpo0", mcs2gpo[0], 0, fb);
ENTRY(0x000001f0, u16, pre, "mcs2gpo1", mcs2gpo[1], 0, fb);
ENTRY(0x000001f0, u16, pre, "mcs2gpo2", mcs2gpo[2], 0, fb);
ENTRY(0x000001f0, u16, pre, "mcs2gpo3", mcs2gpo[3], 0, fb);
ENTRY(0x000001f0, u16, pre, "mcs2gpo4", mcs2gpo[4], 0, fb);
ENTRY(0x000001f0, u16, pre, "mcs2gpo5", mcs2gpo[5], 0, fb);
ENTRY(0x000001f0, u16, pre, "mcs2gpo6", mcs2gpo[6], 0, fb);
ENTRY(0x000001f0, u16, pre, "mcs2gpo7", mcs2gpo[7], 0, fb);
ENTRY(0x000001f0, u16, pre, "mcs5gpo0", mcs5gpo[0], 0, fb);
ENTRY(0x000001f0, u16, pre, "mcs5gpo1", mcs5gpo[1], 0, fb);
ENTRY(0x000001f0, u16, pre, "mcs5gpo2", mcs5gpo[2], 0, fb);
ENTRY(0x000001f0, u16, pre, "mcs5gpo3", mcs5gpo[3], 0, fb);
ENTRY(0x000001f0, u16, pre, "mcs5gpo4", mcs5gpo[4], 0, fb);
ENTRY(0x000001f0, u16, pre, "mcs5gpo5", mcs5gpo[5], 0, fb);
ENTRY(0x000001f0, u16, pre, "mcs5gpo6", mcs5gpo[6], 0, fb);
ENTRY(0x000001f0, u16, pre, "mcs5gpo7", mcs5gpo[7], 0, fb);
ENTRY(0x000001f0, u16, pre, "mcs5glpo0", mcs5glpo[0], 0, fb);
ENTRY(0x000001f0, u16, pre, "mcs5glpo1", mcs5glpo[1], 0, fb);
ENTRY(0x000001f0, u16, pre, "mcs5glpo2", mcs5glpo[2], 0, fb);
ENTRY(0x000001f0, u16, pre, "mcs5glpo3", mcs5glpo[3], 0, fb);
ENTRY(0x000001f0, u16, pre, "mcs5glpo4", mcs5glpo[4], 0, fb);
ENTRY(0x000001f0, u16, pre, "mcs5glpo5", mcs5glpo[5], 0, fb);
ENTRY(0x000001f0, u16, pre, "mcs5glpo6", mcs5glpo[6], 0, fb);
ENTRY(0x000001f0, u16, pre, "mcs5glpo7", mcs5glpo[7], 0, fb);
ENTRY(0x000001f0, u16, pre, "mcs5ghpo0", mcs5ghpo[0], 0, fb);
ENTRY(0x000001f0, u16, pre, "mcs5ghpo1", mcs5ghpo[1], 0, fb);
ENTRY(0x000001f0, u16, pre, "mcs5ghpo2", mcs5ghpo[2], 0, fb);
ENTRY(0x000001f0, u16, pre, "mcs5ghpo3", mcs5ghpo[3], 0, fb);
ENTRY(0x000001f0, u16, pre, "mcs5ghpo4", mcs5ghpo[4], 0, fb);
ENTRY(0x000001f0, u16, pre, "mcs5ghpo5", mcs5ghpo[5], 0, fb);
ENTRY(0x000001f0, u16, pre, "mcs5ghpo6", mcs5ghpo[6], 0, fb);
ENTRY(0x000001f0, u16, pre, "mcs5ghpo7", mcs5ghpo[7], 0, fb);
ENTRY(0x000001f0, u16, pre, "cddpo", cddpo, 0, fb);
ENTRY(0x000001f0, u16, pre, "stbcpo", stbcpo, 0, fb);
ENTRY(0x000001f0, u16, pre, "bw40po", bw40po, 0, fb);
ENTRY(0x000001f0, u16, pre, "bwduppo", bwduppo, 0, fb);
ENTRY(0xfffffe00, u16, pre, "cckbw202gpo", cckbw202gpo, 0, fb);
ENTRY(0xfffffe00, u16, pre, "cckbw20ul2gpo", cckbw20ul2gpo, 0, fb);
ENTRY(0x00000600, u32, pre, "legofdmbw202gpo", legofdmbw202gpo, 0, fb);
ENTRY(0x00000600, u32, pre, "legofdmbw20ul2gpo", legofdmbw20ul2gpo, 0, fb);
ENTRY(0x00000600, u32, pre, "legofdmbw205glpo", legofdmbw205glpo, 0, fb);
ENTRY(0x00000600, u32, pre, "legofdmbw20ul5glpo", legofdmbw20ul5glpo, 0, fb);
ENTRY(0x00000600, u32, pre, "legofdmbw205gmpo", legofdmbw205gmpo, 0, fb);
ENTRY(0x00000600, u32, pre, "legofdmbw20ul5gmpo", legofdmbw20ul5gmpo, 0, fb);
ENTRY(0x00000600, u32, pre, "legofdmbw205ghpo", legofdmbw205ghpo, 0, fb);
ENTRY(0x00000600, u32, pre, "legofdmbw20ul5ghpo", legofdmbw20ul5ghpo, 0, fb);
ENTRY(0xfffffe00, u32, pre, "mcsbw202gpo", mcsbw202gpo, 0, fb);
ENTRY(0x00000600, u32, pre, "mcsbw20ul2gpo", mcsbw20ul2gpo, 0, fb);
ENTRY(0xfffffe00, u32, pre, "mcsbw402gpo", mcsbw402gpo, 0, fb);
ENTRY(0xfffffe00, u32, pre, "mcsbw205glpo", mcsbw205glpo, 0, fb);
ENTRY(0x00000600, u32, pre, "mcsbw20ul5glpo", mcsbw20ul5glpo, 0, fb);
ENTRY(0xfffffe00, u32, pre, "mcsbw405glpo", mcsbw405glpo, 0, fb);
ENTRY(0xfffffe00, u32, pre, "mcsbw205gmpo", mcsbw205gmpo, 0, fb);
ENTRY(0x00000600, u32, pre, "mcsbw20ul5gmpo", mcsbw20ul5gmpo, 0, fb);
ENTRY(0xfffffe00, u32, pre, "mcsbw405gmpo", mcsbw405gmpo, 0, fb);
ENTRY(0xfffffe00, u32, pre, "mcsbw205ghpo", mcsbw205ghpo, 0, fb);
ENTRY(0x00000600, u32, pre, "mcsbw20ul5ghpo", mcsbw20ul5ghpo, 0, fb);
ENTRY(0xfffffe00, u32, pre, "mcsbw405ghpo", mcsbw405ghpo, 0, fb);
ENTRY(0x00000600, u16, pre, "mcs32po", mcs32po, 0, fb);
ENTRY(0x00000600, u16, pre, "legofdm40duppo", legofdm40duppo, 0, fb);
ENTRY(0x00000700, u8, pre, "pcieingress_war", pcieingress_war, 0, fb);
/* TODO: rev 11 support */
ENTRY(0x00000700, u8, pre, "rxgainerr2ga0", rxgainerr2ga[0], 0, fb);
ENTRY(0x00000700, u8, pre, "rxgainerr2ga1", rxgainerr2ga[1], 0, fb);
ENTRY(0x00000700, u8, pre, "rxgainerr2ga2", rxgainerr2ga[2], 0, fb);
ENTRY(0x00000700, u8, pre, "rxgainerr5gla0", rxgainerr5gla[0], 0, fb);
ENTRY(0x00000700, u8, pre, "rxgainerr5gla1", rxgainerr5gla[1], 0, fb);
ENTRY(0x00000700, u8, pre, "rxgainerr5gla2", rxgainerr5gla[2], 0, fb);
ENTRY(0x00000700, u8, pre, "rxgainerr5gma0", rxgainerr5gma[0], 0, fb);
ENTRY(0x00000700, u8, pre, "rxgainerr5gma1", rxgainerr5gma[1], 0, fb);
ENTRY(0x00000700, u8, pre, "rxgainerr5gma2", rxgainerr5gma[2], 0, fb);
ENTRY(0x00000700, u8, pre, "rxgainerr5gha0", rxgainerr5gha[0], 0, fb);
ENTRY(0x00000700, u8, pre, "rxgainerr5gha1", rxgainerr5gha[1], 0, fb);
ENTRY(0x00000700, u8, pre, "rxgainerr5gha2", rxgainerr5gha[2], 0, fb);
ENTRY(0x00000700, u8, pre, "rxgainerr5gua0", rxgainerr5gua[0], 0, fb);
ENTRY(0x00000700, u8, pre, "rxgainerr5gua1", rxgainerr5gua[1], 0, fb);
ENTRY(0x00000700, u8, pre, "rxgainerr5gua2", rxgainerr5gua[2], 0, fb);
ENTRY(0xfffffe00, u8, pre, "sar2g", sar2g, 0, fb);
ENTRY(0xfffffe00, u8, pre, "sar5g", sar5g, 0, fb);
/* TODO: rev 11 support */
ENTRY(0x00000700, u8, pre, "noiselvl2ga0", noiselvl2ga[0], 0, fb);
ENTRY(0x00000700, u8, pre, "noiselvl2ga1", noiselvl2ga[1], 0, fb);
ENTRY(0x00000700, u8, pre, "noiselvl2ga2", noiselvl2ga[2], 0, fb);
ENTRY(0x00000700, u8, pre, "noiselvl5gla0", noiselvl5gla[0], 0, fb);
ENTRY(0x00000700, u8, pre, "noiselvl5gla1", noiselvl5gla[1], 0, fb);
ENTRY(0x00000700, u8, pre, "noiselvl5gla2", noiselvl5gla[2], 0, fb);
ENTRY(0x00000700, u8, pre, "noiselvl5gma0", noiselvl5gma[0], 0, fb);
ENTRY(0x00000700, u8, pre, "noiselvl5gma1", noiselvl5gma[1], 0, fb);
ENTRY(0x00000700, u8, pre, "noiselvl5gma2", noiselvl5gma[2], 0, fb);
ENTRY(0x00000700, u8, pre, "noiselvl5gha0", noiselvl5gha[0], 0, fb);
ENTRY(0x00000700, u8, pre, "noiselvl5gha1", noiselvl5gha[1], 0, fb);
ENTRY(0x00000700, u8, pre, "noiselvl5gha2", noiselvl5gha[2], 0, fb);
ENTRY(0x00000700, u8, pre, "noiselvl5gua0", noiselvl5gua[0], 0, fb);
ENTRY(0x00000700, u8, pre, "noiselvl5gua1", noiselvl5gua[1], 0, fb);
ENTRY(0x00000700, u8, pre, "noiselvl5gua2", noiselvl5gua[2], 0, fb);
}
#undef ENTRY /* It's specififc, uses local variable, don't use it (again). */
static void bcm47xx_fill_sprom_path_r4589(struct ssb_sprom *sprom,
const char *prefix, bool fallback)
{
char postfix[2];
int i;
for (i = 0; i < ARRAY_SIZE(sprom->core_pwr_info); i++) {
struct ssb_sprom_core_pwr_info *pwr_info;
pwr_info = &sprom->core_pwr_info[i];
snprintf(postfix, sizeof(postfix), "%i", i);
nvram_read_u8(prefix, postfix, "maxp2ga",
&pwr_info->maxpwr_2g, 0, fallback);
nvram_read_u8(prefix, postfix, "itt2ga",
&pwr_info->itssi_2g, 0, fallback);
nvram_read_u8(prefix, postfix, "itt5ga",
&pwr_info->itssi_5g, 0, fallback);
nvram_read_u16(prefix, postfix, "pa2gw0a",
&pwr_info->pa_2g[0], 0, fallback);
nvram_read_u16(prefix, postfix, "pa2gw1a",
&pwr_info->pa_2g[1], 0, fallback);
nvram_read_u16(prefix, postfix, "pa2gw2a",
&pwr_info->pa_2g[2], 0, fallback);
nvram_read_u8(prefix, postfix, "maxp5ga",
&pwr_info->maxpwr_5g, 0, fallback);
nvram_read_u8(prefix, postfix, "maxp5gha",
&pwr_info->maxpwr_5gh, 0, fallback);
nvram_read_u8(prefix, postfix, "maxp5gla",
&pwr_info->maxpwr_5gl, 0, fallback);
nvram_read_u16(prefix, postfix, "pa5gw0a",
&pwr_info->pa_5g[0], 0, fallback);
nvram_read_u16(prefix, postfix, "pa5gw1a",
&pwr_info->pa_5g[1], 0, fallback);
nvram_read_u16(prefix, postfix, "pa5gw2a",
&pwr_info->pa_5g[2], 0, fallback);
nvram_read_u16(prefix, postfix, "pa5glw0a",
&pwr_info->pa_5gl[0], 0, fallback);
nvram_read_u16(prefix, postfix, "pa5glw1a",
&pwr_info->pa_5gl[1], 0, fallback);
nvram_read_u16(prefix, postfix, "pa5glw2a",
&pwr_info->pa_5gl[2], 0, fallback);
nvram_read_u16(prefix, postfix, "pa5ghw0a",
&pwr_info->pa_5gh[0], 0, fallback);
nvram_read_u16(prefix, postfix, "pa5ghw1a",
&pwr_info->pa_5gh[1], 0, fallback);
nvram_read_u16(prefix, postfix, "pa5ghw2a",
&pwr_info->pa_5gh[2], 0, fallback);
}
}
static void bcm47xx_fill_sprom_path_r45(struct ssb_sprom *sprom,
const char *prefix, bool fallback)
{
char postfix[2];
int i;
for (i = 0; i < ARRAY_SIZE(sprom->core_pwr_info); i++) {
struct ssb_sprom_core_pwr_info *pwr_info;
pwr_info = &sprom->core_pwr_info[i];
snprintf(postfix, sizeof(postfix), "%i", i);
nvram_read_u16(prefix, postfix, "pa2gw3a",
&pwr_info->pa_2g[3], 0, fallback);
nvram_read_u16(prefix, postfix, "pa5gw3a",
&pwr_info->pa_5g[3], 0, fallback);
nvram_read_u16(prefix, postfix, "pa5glw3a",
&pwr_info->pa_5gl[3], 0, fallback);
nvram_read_u16(prefix, postfix, "pa5ghw3a",
&pwr_info->pa_5gh[3], 0, fallback);
}
}
static bool bcm47xx_is_valid_mac(u8 *mac)
{
return mac && !(mac[0] == 0x00 && mac[1] == 0x90 && mac[2] == 0x4c);
}
static int bcm47xx_increase_mac_addr(u8 *mac, u8 num)
{
u8 *oui = mac + ETH_ALEN/2 - 1;
u8 *p = mac + ETH_ALEN - 1;
do {
(*p) += num;
if (*p > num)
break;
p--;
num = 1;
} while (p != oui);
if (p == oui) {
pr_err("unable to fetch mac address\n");
return -ENOENT;
}
return 0;
}
static int mac_addr_used = 2;
static void bcm47xx_fill_sprom_ethernet(struct ssb_sprom *sprom,
const char *prefix, bool fallback)
{
bool fb = fallback;
nvram_read_macaddr(prefix, "et0macaddr", sprom->et0mac, fallback);
nvram_read_u8(prefix, NULL, "et0mdcport", &sprom->et0mdcport, 0,
fallback);
nvram_read_u8(prefix, NULL, "et0phyaddr", &sprom->et0phyaddr, 0,
fallback);
nvram_read_macaddr(prefix, "et1macaddr", sprom->et1mac, fallback);
nvram_read_u8(prefix, NULL, "et1mdcport", &sprom->et1mdcport, 0,
fallback);
nvram_read_u8(prefix, NULL, "et1phyaddr", &sprom->et1phyaddr, 0,
fallback);
nvram_read_macaddr(prefix, "et2macaddr", sprom->et2mac, fb);
nvram_read_u8(prefix, NULL, "et2mdcport", &sprom->et2mdcport, 0, fb);
nvram_read_u8(prefix, NULL, "et2phyaddr", &sprom->et2phyaddr, 0, fb);
nvram_read_macaddr(prefix, "macaddr", sprom->il0mac, fallback);
nvram_read_macaddr(prefix, "il0macaddr", sprom->il0mac, fallback);
/* The address prefix 00:90:4C is used by Broadcom in their initial
* configuration. When a mac address with the prefix 00:90:4C is used
* all devices from the same series are sharing the same mac address.
* To prevent mac address collisions we replace them with a mac address
* based on the base address.
*/
if (!bcm47xx_is_valid_mac(sprom->il0mac)) {
u8 mac[6];
nvram_read_macaddr(NULL, "et0macaddr", mac, false);
if (bcm47xx_is_valid_mac(mac)) {
int err = bcm47xx_increase_mac_addr(mac, mac_addr_used);
if (!err) {
ether_addr_copy(sprom->il0mac, mac);
mac_addr_used++;
}
}
}
}
static void bcm47xx_fill_board_data(struct ssb_sprom *sprom, const char *prefix,
bool fallback)
{
nvram_read_u32_2(prefix, "boardflags", &sprom->boardflags_lo,
&sprom->boardflags_hi, fallback);
nvram_read_u32_2(prefix, "boardflags2", &sprom->boardflags2_lo,
&sprom->boardflags2_hi, fallback);
}
void bcm47xx_fill_sprom(struct ssb_sprom *sprom, const char *prefix,
bool fallback)
{
bcm47xx_fill_sprom_ethernet(sprom, prefix, fallback);
bcm47xx_fill_board_data(sprom, prefix, fallback);
nvram_read_u8(prefix, NULL, "sromrev", &sprom->revision, 0, fallback);
/* Entries requiring custom functions */
nvram_read_alpha2(prefix, "ccode", sprom->alpha2, fallback);
if (sprom->revision >= 3)
nvram_read_leddc(prefix, "leddc", &sprom->leddc_on_time,
&sprom->leddc_off_time, fallback);
switch (sprom->revision) {
case 4:
case 5:
bcm47xx_fill_sprom_path_r4589(sprom, prefix, fallback);
bcm47xx_fill_sprom_path_r45(sprom, prefix, fallback);
break;
case 8:
case 9:
bcm47xx_fill_sprom_path_r4589(sprom, prefix, fallback);
break;
}
bcm47xx_sprom_fill_auto(sprom, prefix, fallback);
}
#if IS_BUILTIN(CONFIG_SSB) && IS_ENABLED(CONFIG_SSB_SPROM)
static int bcm47xx_get_sprom_ssb(struct ssb_bus *bus, struct ssb_sprom *out)
{
char prefix[10];
switch (bus->bustype) {
case SSB_BUSTYPE_SSB:
bcm47xx_fill_sprom(out, NULL, false);
return 0;
case SSB_BUSTYPE_PCI:
memset(out, 0, sizeof(struct ssb_sprom));
snprintf(prefix, sizeof(prefix), "pci/%u/%u/",
bus->host_pci->bus->number + 1,
PCI_SLOT(bus->host_pci->devfn));
bcm47xx_fill_sprom(out, prefix, false);
return 0;
default:
pr_warn("Unable to fill SPROM for given bustype.\n");
return -EINVAL;
}
}
#endif
#if IS_BUILTIN(CONFIG_BCMA)
/*
* Having many NVRAM entries for PCI devices led to repeating prefixes like
* pci/1/1/ all the time and wasting flash space. So at some point Broadcom
* decided to introduce prefixes like 0: 1: 2: etc.
* If we find e.g. devpath0=pci/2/1 or devpath0=pci/2/1/ we should use 0:
* instead of pci/2/1/.
*/
static void bcm47xx_sprom_apply_prefix_alias(char *prefix, size_t prefix_size)
{
size_t prefix_len = strlen(prefix);
size_t short_len = prefix_len - 1;
char nvram_var[10];
char buf[20];
int i;
/* Passed prefix has to end with a slash */
if (prefix_len <= 0 || prefix[prefix_len - 1] != '/')
return;
for (i = 0; i < 3; i++) {
if (snprintf(nvram_var, sizeof(nvram_var), "devpath%d", i) <= 0)
continue;
if (bcm47xx_nvram_getenv(nvram_var, buf, sizeof(buf)) < 0)
continue;
if (!strcmp(buf, prefix) ||
(short_len && strlen(buf) == short_len && !strncmp(buf, prefix, short_len))) {
snprintf(prefix, prefix_size, "%d:", i);
return;
}
}
}
static int bcm47xx_get_sprom_bcma(struct bcma_bus *bus, struct ssb_sprom *out)
{
struct bcma_boardinfo *binfo = &bus->boardinfo;
struct bcma_device *core;
char buf[10];
char *prefix;
bool fallback = false;
switch (bus->hosttype) {
case BCMA_HOSTTYPE_PCI:
memset(out, 0, sizeof(struct ssb_sprom));
/* On BCM47XX all PCI buses share the same domain */
if (config_enabled(CONFIG_BCM47XX))
snprintf(buf, sizeof(buf), "pci/%u/%u/",
bus->host_pci->bus->number + 1,
PCI_SLOT(bus->host_pci->devfn));
else
snprintf(buf, sizeof(buf), "pci/%u/%u/",
pci_domain_nr(bus->host_pci->bus) + 1,
bus->host_pci->bus->number);
bcm47xx_sprom_apply_prefix_alias(buf, sizeof(buf));
prefix = buf;
break;
case BCMA_HOSTTYPE_SOC:
memset(out, 0, sizeof(struct ssb_sprom));
core = bcma_find_core(bus, BCMA_CORE_80211);
if (core) {
snprintf(buf, sizeof(buf), "sb/%u/",
core->core_index);
prefix = buf;
fallback = true;
} else {
prefix = NULL;
}
break;
default:
pr_warn("Unable to fill SPROM for given bustype.\n");
return -EINVAL;
}
nvram_read_u16(prefix, NULL, "boardvendor", &binfo->vendor, 0, true);
if (!binfo->vendor)
binfo->vendor = SSB_BOARDVENDOR_BCM;
nvram_read_u16(prefix, NULL, "boardtype", &binfo->type, 0, true);
bcm47xx_fill_sprom(out, prefix, fallback);
return 0;
}
#endif
static unsigned int bcm47xx_sprom_registered;
/*
* On bcm47xx we need to register SPROM fallback handler very early, so we can't
* use anything like platform device / driver for this.
*/
int bcm47xx_sprom_register_fallbacks(void)
{
if (bcm47xx_sprom_registered)
return 0;
#if IS_BUILTIN(CONFIG_SSB) && IS_ENABLED(CONFIG_SSB_SPROM)
if (ssb_arch_register_fallback_sprom(&bcm47xx_get_sprom_ssb))
pr_warn("Failed to register ssb SPROM handler\n");
#endif
#if IS_BUILTIN(CONFIG_BCMA)
if (bcma_arch_register_fallback_sprom(&bcm47xx_get_sprom_bcma))
pr_warn("Failed to register bcma SPROM handler\n");
#endif
bcm47xx_sprom_registered = 1;
return 0;
}
fs_initcall(bcm47xx_sprom_register_fallbacks);

6
target/linux/bcm53xx/image/Makefile
View File

@ -330,7 +330,7 @@ define Device/tplink-archer-c5-v2
IMAGE/bin := append-rootfs | bcm53xx-tplink-safeloader
TPLINK_BOARD := ARCHER-C5-V2
endef
#TARGET_DEVICES += tplink-archer-c5-v2
TARGET_DEVICES += tplink-archer-c5-v2
define Device/tplink-archer-c9-v1
DEVICE_TITLE := TP-LINK Archer C9 V1
@ -339,8 +339,6 @@ define Device/tplink-archer-c9-v1
IMAGE/bin := append-rootfs | bcm53xx-tplink-safeloader
TPLINK_BOARD := ARCHERC9
endef
#TARGET_DEVICES += tplink-archer-c9-v1
TARGET_DEVICES += tplink-archer-c9-v1
$(eval $(call BuildImage))

3
target/linux/bcm53xx/patches-4.9/130-ARM-dts-BCM5301X-add-missing-LEDs-for-Buffalo-WZR-90.patch → target/linux/bcm53xx/patches-4.14/036-v4.17-0001-ARM-dts-BCM5301X-add-missing-LEDs-for-Buffalo-WZR-90.patch
View File

@ -1,4 +1,4 @@
From c830b958f52fc666919439d6f8f6caa8b6844d44 Mon Sep 17 00:00:00 2001
From 811ae58e76da88106f6d28159d4ea7b163dfaa48 Mon Sep 17 00:00:00 2001
From: INAGAKI Hiroshi <musashino.open@gmail.com>
Date: Wed, 7 Mar 2018 20:33:56 +0900
Subject: [PATCH] ARM: dts: BCM5301X: add missing LEDs for Buffalo WZR-900DHP
@ -12,6 +12,7 @@ I Added missing LED definitions for WZR-900DHP.
Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
Reviewed-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts | 68 +++++++++++++++++++++++
1 file changed, 68 insertions(+)

39
target/linux/bcm53xx/patches-4.14/037-v4.18-0001-ARM-dts-BCM5301X-Switch-Luxul-XWC-1000-to-the-new-fi.patch Normal file
View File

@ -0,0 +1,39 @@
From 0c0d1c90ddc44df70401b7cfff178c41b2f83ffa Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
Date: Wed, 4 Apr 2018 15:14:21 +0200
Subject: [PATCH] ARM: dts: BCM5301X: Switch Luxul XWC-1000 to the new fixed
partitions syntax
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
This new syntax is slightly better designed & uses "compatible" string.
For details see Documentation/devicetree/bindings/mtd/partition.txt .
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts | 12 +++++++++---
1 file changed, 9 insertions(+), 3 deletions(-)
--- a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
+++ b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
@@ -26,9 +26,15 @@
nand: nand@18028000 {
nandcs@0 {
- partition@0 {
- label = "ubi";
- reg = <0x00000000 0x08000000>;
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "ubi";
+ reg = <0x00000000 0x08000000>;
+ };
};
};
};

440
target/linux/bcm53xx/patches-4.14/037-v4.18-0002-ARM-dts-BCM5301X-Relicense-most-DTS-files-to-the-GPL.patch Normal file
View File

@ -0,0 +1,440 @@
From 2b3db67ce4bc4d1d8556e87a17df7765da8dbdc5 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
Date: Wed, 2 May 2018 16:11:02 +0200
Subject: [PATCH] ARM: dts: BCM5301X: Relicense most DTS files to the GPL 2.0+
/ MIT
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
These files were created and ever touched by a group of three people
only: Dan, Hauke and me. They were licensed under GNU/GPL or ISC.
Introducing and discussing SPDX-License-Identifier resulted in a
conclusion that ISC is a not recommended license (see also a
license-rules.rst). Moveover an old e-mail from Alan Cox was pointed
which explained that dual licensing is a safer solution than depending
on a common compatibility belief.
This commit switches most of BCM5301X DTS files to dual licensing using:
1) GPL 2.0+ to make sure they are compatible with Linux kernel
2) MIT to allow sharing with more permissive projects
Both licenses belong to the preferred ones (see LICENSES/preferred/).
An attempt to relicense remaining files will be made separately and will
require approve from more/other developers.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
Acked-by: Dan Haab <dan.haab@luxul.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts | 13 +------------
arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts | 13 +------------
arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts | 3 +--
arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts | 3 +--
arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts | 3 +--
arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts | 13 +------------
arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts | 3 +--
arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts | 13 +------------
arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts | 13 +------------
arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts | 3 +--
arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts | 3 +--
arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts | 3 +--
arch/arm/boot/dts/bcm4709-linksys-ea9200.dts | 3 +--
arch/arm/boot/dts/bcm4709-netgear-r7000.dts | 13 +------------
arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts | 3 +--
arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts | 13 +------------
arch/arm/boot/dts/bcm47094-linksys-panamera.dts | 3 +--
arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts | 3 +--
arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts | 3 +--
arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts | 3 +--
arch/arm/boot/dts/bcm47094-netgear-r8500.dts | 3 +--
arch/arm/boot/dts/bcm5301x-nand-cs0-bch1.dtsi | 3 +--
arch/arm/boot/dts/bcm5301x-nand-cs0-bch4.dtsi | 3 +--
arch/arm/boot/dts/bcm5301x-nand-cs0-bch8.dtsi | 3 +--
arch/arm/boot/dts/bcm5301x-nand-cs0.dtsi | 3 +--
25 files changed, 25 insertions(+), 120 deletions(-)
--- a/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts
+++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts
@@ -1,20 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/*
* Broadcom BCM470X / BCM5301X ARM platform code.
* DTS for Asus RT-AC56U
*
* Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
- * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
- * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
- * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
- * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
- * PERFORMANCE OF THIS SOFTWARE.
*/
/dts-v1/;
--- a/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts
+++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts
@@ -1,20 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/*
* Broadcom BCM470X / BCM5301X ARM platform code.
* DTS for Asus RT-AC68U
*
* Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
- * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
- * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
- * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
- * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
- * PERFORMANCE OF THIS SOFTWARE.
*/
/dts-v1/;
--- a/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts
+++ b/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts
@@ -1,7 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/*
* Copyright (C) 2017 Rafał Miłecki <rafal@milecki.pl>
- *
- * Licensed under the ISC license.
*/
/dts-v1/;
--- a/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts
+++ b/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts
@@ -1,7 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/*
* Copyright 2016 Luxul Inc.
- *
- * Licensed under the ISC license.
*/
/dts-v1/;
--- a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
+++ b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
@@ -1,10 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/*
* Broadcom BCM470X / BCM5301X ARM platform code.
* DTS for Luxul XWC-1000
*
* Copyright 2014 Luxul Inc.
- *
- * Licensed under the GNU/GPL. See COPYING for details.
*/
/dts-v1/;
--- a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
+++ b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
@@ -1,20 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/*
* Broadcom BCM470X / BCM5301X ARM platform code.
* DTS for Netgear R6300 V2
*
* Copyright (C) 2014 Rafał Miłecki <zajec5@gmail.com>
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
- * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
- * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
- * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
- * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
- * PERFORMANCE OF THIS SOFTWARE.
*/
/dts-v1/;
--- a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
+++ b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
@@ -1,10 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/*
* Broadcom BCM470X / BCM5301X arm platform code.
* DTS for SmartRG SR400ac
*
* Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
- *
- * Licensed under the GNU/GPL. See COPYING for details.
*/
/dts-v1/;
--- a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
+++ b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
@@ -1,20 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/*
* Broadcom BCM470X / BCM5301X ARM platform code.
* DTS for Asus RT-N18U
*
* Copyright (C) 2014 Rafał Miłecki <zajec5@gmail.com>
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
- * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
- * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
- * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
- * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
- * PERFORMANCE OF THIS SOFTWARE.
*/
/dts-v1/;
--- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
+++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
@@ -1,20 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/*
* Broadcom BCM470X / BCM5301X ARM platform code.
* DTS for Buffalo WZR-600DHP2
*
* Copyright (C) 2014 Rafał Miłecki <zajec5@gmail.com>
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
- * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
- * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
- * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
- * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
- * PERFORMANCE OF THIS SOFTWARE.
*/
/dts-v1/;
--- a/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts
+++ b/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts
@@ -1,7 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/*
* Copyright 2017 Luxul Inc.
- *
- * Licensed under the ISC license.
*/
/dts-v1/;
--- a/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts
+++ b/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts
@@ -1,7 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/*
* Copyright 2017 Luxul Inc.
- *
- * Licensed under the ISC license.
*/
/dts-v1/;
--- a/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts
+++ b/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts
@@ -1,7 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/*
* Copyright (C) 2017 Rafał Miłecki <rafal@milecki.pl>
- *
- * Licensed under the ISC license.
*/
/dts-v1/;
--- a/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts
+++ b/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts
@@ -1,7 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/*
* Copyright (C) 2017 Rafał Miłecki <rafal@milecki.pl>
- *
- * Licensed under the ISC license.
*/
/dts-v1/;
--- a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
+++ b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
@@ -1,20 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/*
* Broadcom BCM470X / BCM5301X ARM platform code.
* DTS for Netgear R7000
*
* Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
- * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
- * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
- * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
- * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
- * PERFORMANCE OF THIS SOFTWARE.
*/
/dts-v1/;
--- a/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
+++ b/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
@@ -1,7 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/*
* Copyright (C) 2016 Rafał Miłecki <rafal@milecki.pl>
- *
- * Licensed under the ISC license.
*/
/dts-v1/;
--- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
+++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
@@ -1,20 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/*
* Broadcom BCM470X / BCM5301X ARM platform code.
* DTS for D-Link DIR-885L
*
* Copyright (C) 2016 Rafał Miłecki <zajec5@gmail.com>
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
- * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
- * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
- * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
- * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
- * PERFORMANCE OF THIS SOFTWARE.
*/
/dts-v1/;
--- a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
+++ b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
@@ -1,7 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/*
* Copyright (C) 2017 Rafał Miłecki <rafal@milecki.pl>
- *
- * Licensed under the ISC license.
*/
/dts-v1/;
--- a/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts
+++ b/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts
@@ -1,7 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/*
* Copyright (C) 2017 Luxul Inc.
- *
- * Licensed under the ISC license.
*/
/dts-v1/;
--- a/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts
+++ b/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts
@@ -1,7 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/*
* Copyright (C) 2017 Luxul Inc.
- *
- * Licensed under the ISC license.
*/
/dts-v1/;
--- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
+++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
@@ -1,7 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/*
* Copyright 2016 Luxul Inc.
- *
- * Licensed under the ISC license.
*/
/dts-v1/;
--- a/arch/arm/boot/dts/bcm47094-netgear-r8500.dts
+++ b/arch/arm/boot/dts/bcm47094-netgear-r8500.dts
@@ -1,7 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/*
* Copyright (C) 2016 Rafał Miłecki <rafal@milecki.pl>
- *
- * Licensed under the ISC license.
*/
/dts-v1/;
--- a/arch/arm/boot/dts/bcm5301x-nand-cs0-bch1.dtsi
+++ b/arch/arm/boot/dts/bcm5301x-nand-cs0-bch1.dtsi
@@ -1,9 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/*
* Broadcom Northstar NAND.
*
* Copyright (C) 2016 Rafał Miłecki <rafal.milecki@gmail.com>
- *
- * Licensed under the ISC license.
*/
#include "bcm5301x-nand-cs0.dtsi"
--- a/arch/arm/boot/dts/bcm5301x-nand-cs0-bch4.dtsi
+++ b/arch/arm/boot/dts/bcm5301x-nand-cs0-bch4.dtsi
@@ -1,7 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/*
* Copyright 2016 Luxul Inc.
- *
- * Licensed under the ISC license.
*/
#include "bcm5301x-nand-cs0.dtsi"
--- a/arch/arm/boot/dts/bcm5301x-nand-cs0-bch8.dtsi
+++ b/arch/arm/boot/dts/bcm5301x-nand-cs0-bch8.dtsi
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/*
* Broadcom BCM470X / BCM5301X Nand chip defaults.
*
@@ -5,8 +6,6 @@
* and uses 8 bit ECC.
*
* Copyright (C) 2015 Hauke Mehrtens <hauke@hauke-m.de>
- *
- * Licensed under the GNU/GPL. See COPYING for details.
*/
#include "bcm5301x-nand-cs0.dtsi"
--- a/arch/arm/boot/dts/bcm5301x-nand-cs0.dtsi
+++ b/arch/arm/boot/dts/bcm5301x-nand-cs0.dtsi
@@ -1,9 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/*
* Broadcom Northstar NAND.
*
* Copyright (C) 2015 Hauke Mehrtens <hauke@hauke-m.de>
- *
- * Licensed under the GNU/GPL. See COPYING for details.
*/
/ {

79
target/linux/bcm53xx/patches-4.14/037-v4.18-0003-ARM-dts-BCM5301X-Relicense-Buffalo-files-to-the-GPL-.patch Normal file
View File

@ -0,0 +1,79 @@
From fd0ab539d185a828f2071ee5f311bf101c7fea08 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
Date: Fri, 4 May 2018 11:54:45 +0200
Subject: [PATCH] ARM: dts: BCM5301X: Relicense Buffalo files to the GPL 2.0+ /
MIT
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
This matches licensing used by other BCM5301X files and is preferred as:
1) GPL 2.0+ makes is clearly compatible with Linux kernel
2) MIT is also permissive but preferred over ISC
These files were created and ever touched by a group of four people
only: Felix, INAGAKI, Hauke and me.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: Felix Fietkau <nbd@nbd.name>
Acked-by: INAGAKI Hiroshi <musashino.open@gmail.com>
Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts | 3 +--
arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts | 13 +------------
arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts | 3 +--
3 files changed, 3 insertions(+), 16 deletions(-)
--- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
+++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
@@ -1,10 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/*
* Broadcom BCM470X / BCM5301X ARM platform code.
* DTS for Buffalo WZR-1750DHP
*
* Copyright (C) 2014 Rafał Miłecki <zajec5@gmail.com>
- *
- * Licensed under the GNU/GPL. See COPYING for details.
*/
/dts-v1/;
--- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
+++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
@@ -1,20 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/*
* Broadcom BCM470X / BCM5301X ARM platform code.
* DTS for Buffalo WZR-900DHP
*
* Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
- * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
- * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
- * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
- * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
- * PERFORMANCE OF THIS SOFTWARE.
*/
/dts-v1/;
--- a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
+++ b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
@@ -1,10 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/*
* Broadcom BCM470X / BCM5301X ARM platform code.
* DTS for Buffalo WXR-1900DHP
*
* Copyright (C) 2015 Felix Fietkau <nbd@openwrt.org>
- *
- * Licensed under the GNU/GPL. See COPYING for details.
*/
/dts-v1/;

112
target/linux/bcm53xx/patches-4.14/037-v4.18-0004-ARM-dts-BCM5301X-Add-DT-for-Luxul-XWR-3150-V1.patch Normal file
View File

@ -0,0 +1,112 @@
From 2e2105a1578172eaf61e3b59a2c10c4fe04c21b9 Mon Sep 17 00:00:00 2001
From: Dan Haab <riproute@gmail.com>
Date: Fri, 4 May 2018 10:08:43 -0600
Subject: [PATCH] ARM: dts: BCM5301X: Add DT for Luxul XWR-3150 V1
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Luxul XWR-3150 is a wireless router similar to the XWR-3100 except:
1) It has more RAM
2) Its NAND controller in running in BCH8 mode
3) LAN ports LEDs are hardware controlled
Signed-off-by: Dan Haab <dan.haab@luxul.com>
Acked-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts | 77 ++++++++++++++++++++++++
2 files changed, 78 insertions(+)
create mode 100644 arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -104,6 +104,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
bcm47094-luxul-abr-4500.dtb \
bcm47094-luxul-xbr-4500.dtb \
bcm47094-luxul-xwr-3100.dtb \
+ bcm47094-luxul-xwr-3150-v1.dtb \
bcm47094-netgear-r8500.dtb \
bcm94708.dtb \
bcm94709.dtb \
--- /dev/null
+++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
@@ -0,0 +1,77 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2018 Luxul Inc.
+ */
+
+/dts-v1/;
+
+#include "bcm47094.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
+ compatible = "luxul,xwr-3150-v1", "brcm,bcm47094", "brcm,bcm4708";
+ model = "Luxul XWR-3150 V1";
+
+ chosen {
+ bootargs = "earlycon";
+ };
+
+ memory {
+ reg = <0x00000000 0x08000000
+ 0x88000000 0x18000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ power {
+ label = "bcm53xx:green:power";
+ gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "default-on";
+ };
+
+ usb3 {
+ label = "bcm53xx:green:usb3";
+ gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
+ trigger-sources = <&ohci_port1>, <&ehci_port1>,
+ <&xhci_port1>;
+ linux,default-trigger = "usbport";
+ };
+
+ status {
+ label = "bcm53xx:green:status";
+ gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "timer";
+ };
+
+ 2ghz {
+ label = "bcm53xx:green:2ghz";
+ gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
+ };
+
+ 5ghz {
+ label = "bcm53xx:green:5ghz";
+ gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ restart {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&usb3 {
+ vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
+};
+
+&spi_nor {
+ status = "okay";
+};

90
target/linux/bcm53xx/patches-4.14/037-v4.18-0005-ARM-dts-BCM5301X-Add-DT-for-Luxul-XAP-1610.patch Normal file
View File

@ -0,0 +1,90 @@
From 6054cb5788072e214af582c42d9bd8c5ffa6e288 Mon Sep 17 00:00:00 2001
From: Dan Haab <riproute@gmail.com>
Date: Fri, 4 May 2018 10:08:44 -0600
Subject: [PATCH] ARM: dts: BCM5301X: Add DT for Luxul XAP-1610
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
It's an access point based on BCM47094 SoC with two BCM4366E wireless
chipsets.
Signed-off-by: Dan Haab <dan.haab@luxul.com>
Acked-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts | 57 +++++++++++++++++++++++++++
2 files changed, 58 insertions(+)
create mode 100644 arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -102,6 +102,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
bcm47094-dlink-dir-885l.dtb \
bcm47094-linksys-panamera.dtb \
bcm47094-luxul-abr-4500.dtb \
+ bcm47094-luxul-xap-1610.dtb \
bcm47094-luxul-xbr-4500.dtb \
bcm47094-luxul-xwr-3100.dtb \
bcm47094-luxul-xwr-3150-v1.dtb \
--- /dev/null
+++ b/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts
@@ -0,0 +1,57 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2018 Luxul Inc.
+ */
+
+/dts-v1/;
+
+#include "bcm47094.dtsi"
+
+/ {
+ compatible = "luxul,xap-1610-v1", "brcm,bcm47094", "brcm,bcm4708";
+ model = "Luxul XAP-1610 V1";
+
+ chosen {
+ bootargs = "earlycon";
+ };
+
+ memory {
+ reg = <0x00000000 0x08000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ status {
+ label = "bcm53xx:green:status";
+ gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "timer";
+ };
+
+ 2ghz {
+ label = "bcm53xx:blue:2ghz";
+ gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
+ };
+
+ 5ghz {
+ label = "bcm53xx:blue:5ghz";
+ gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ restart {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&spi_nor {
+ status = "okay";
+};

48
target/linux/bcm53xx/patches-4.14/037-v4.18-0006-ARM-dts-BCM5301X-Relicense-Asus-RT-AC87U-file-to-the.patch Normal file
View File

@ -0,0 +1,48 @@
From 9c281b5e129961b9940a27f8da24dddd1c0eba87 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
Date: Fri, 4 May 2018 12:03:24 +0200
Subject: [PATCH] ARM: dts: BCM5301X: Relicense Asus RT-AC87U file to the GPL
2.0+ / MIT
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
This matches licensing used by other BCM5301X files and is preferred as:
1) GPL 2.0+ makes is clearly compatible with Linux kernel
2) MIT is also permissive but preferred over ISC
This file were created and ever touched by a group of three people only:
Álvaro, Hauke and me.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
Acked-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts | 13 +------------
1 file changed, 1 insertion(+), 12 deletions(-)
--- a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
+++ b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
@@ -1,20 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/*
* Broadcom BCM470X / BCM5301X ARM platform code.
* DTS for Asus RT-AC87U
*
* Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
- * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
- * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
- * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
- * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
- * PERFORMANCE OF THIS SOFTWARE.
*/
/dts-v1/;

39
target/linux/bcm53xx/patches-4.14/037-v4.18-0007-ARM-dts-BCM5301X-Switch-D-Link-DIR-885L-to-the-new-p.patch Normal file
View File

@ -0,0 +1,39 @@
From a05f1e36a57d02374a203719abc5bf2e8c51e125 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
Date: Thu, 10 May 2018 23:20:00 +0200
Subject: [PATCH] ARM: dts: BCM5301X: Switch D-Link DIR-885L to the new
partitions syntax
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
This new syntax is slightly better designed & uses "compatible" string.
For details see Documentation/devicetree/bindings/mtd/partition.txt .
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts | 12 +++++++++---
1 file changed, 9 insertions(+), 3 deletions(-)
--- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
+++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
@@ -26,9 +26,15 @@
nand: nand@18028000 {
nandcs@0 {
- partition@0 {
- label = "firmware";
- reg = <0x00000000 0x08000000>;
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "firmware";
+ reg = <0x00000000 0x08000000>;
+ };
};
};
};

24
target/linux/bcm53xx/patches-4.14/037-v4.18-0008-ARM-dts-BCM5301x-Fix-i2c-controller-interrupt-type.patch Normal file
View File

@ -0,0 +1,24 @@
From a0a8338e905734518ab9b10b06e7fd0201228f8b Mon Sep 17 00:00:00 2001
From: Florian Fainelli <f.fainelli@gmail.com>
Date: Mon, 11 Jun 2018 15:53:40 -0700
Subject: [PATCH] ARM: dts: BCM5301x: Fix i2c controller interrupt type
The i2c controller should be using IRQ_TYPE_LEVEL_HIGH, fix that.
Fixes: bb097e3e0045 ("ARM: dts: BCM5301X: Add I2C support to the DT")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
arch/arm/boot/dts/bcm5301x.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/arm/boot/dts/bcm5301x.dtsi
+++ b/arch/arm/boot/dts/bcm5301x.dtsi
@@ -365,7 +365,7 @@
i2c0: i2c@18009000 {
compatible = "brcm,iproc-i2c";
reg = <0x18009000 0x50>;
- interrupts = <GIC_SPI 121 IRQ_TYPE_NONE>;
+ interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clock-frequency = <100000>;

456
target/linux/bcm53xx/patches-4.14/038-v4.19-0001-ARM-dts-BCM5301X-Make-USB-3.0-PHY-use-MDIO-PHY-drive.patch Normal file
View File

@ -0,0 +1,456 @@
From 37f6130ec39fe14e923d472746a51e6f06f761b7 Mon Sep 17 00:00:00 2001
From: Vivek Unune <npcomplete13@gmail.com>
Date: Mon, 9 Apr 2018 18:31:53 -0400
Subject: [PATCH] ARM: dts: BCM5301X: Make USB 3.0 PHY use MDIO PHY driver
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Currently, the USB 3.0 PHY in bcm5301x.dtsi uses platform driver which
requires register range "ccb-mii" <0x18003000 0x1000>. This range
overlaps with MDIO cmd and param registers (<0x18003000 0x8>).
Essentially, the platform driver partly acts like a MDIO bus driver,
hence to use of this register range.
In some Northstar devices like Linksys EA9500, secondary switch is
connected via external MDIO. The only way to access and configure the
external switch is via MDIO bus. When we enable the MDIO bus in it's
current state, the MDIO bus and any child buses fail to register because
of the register range overlap.
On Northstar, the USB 3.0 PHY is connected at address 0x10 on the
internal MDIO bus. This change moves the usb3_phy node and makes it a
child node of internal MDIO bus.
Thanks to Rafał Miłecki's commit af850e14a7ae ("phy: bcm-ns-usb3: add
MDIO driver using proper bus layer") the same USB 3.0 platform driver
can now act as USB 3.0 PHY MDIO driver.
Tested on Linksys Panamera (EA9500)
Signed-off-by: Vivek Unune <npcomplete13@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts | 4 +++
arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts | 4 +++
arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts | 4 +++
arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts | 4 +++
arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts | 4 +++
arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts | 4 +++
arch/arm/boot/dts/bcm4708-netgear-r6250.dts | 4 +++
arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts | 4 +++
arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts | 4 +++
arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts | 4 +++
arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts | 4 +++
arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts | 4 +++
arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts | 4 +++
arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts | 4 +++
arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts | 4 +++
arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts | 4 +++
arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts | 4 +++
arch/arm/boot/dts/bcm4709-linksys-ea9200.dts | 4 +++
arch/arm/boot/dts/bcm4709-netgear-r7000.dts | 4 +++
arch/arm/boot/dts/bcm4709-netgear-r8000.dts | 4 +++
arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts | 4 +++
arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts | 4 +++
arch/arm/boot/dts/bcm47094-linksys-panamera.dts | 4 +++
arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts | 4 +++
arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts | 4 +++
arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts | 4 +++
arch/arm/boot/dts/bcm47094-netgear-r8500.dts | 4 +++
arch/arm/boot/dts/bcm47094.dtsi | 7 +++--
arch/arm/boot/dts/bcm5301x.dtsi | 35 +++++++++++++++++-----
arch/arm/boot/dts/bcm94708.dts | 4 +++
arch/arm/boot/dts/bcm94709.dts | 4 +++
arch/arm/boot/dts/bcm953012er.dts | 4 +++
arch/arm/boot/dts/bcm953012hr.dts | 4 +++
arch/arm/boot/dts/bcm953012k.dts | 4 +++
34 files changed, 159 insertions(+), 11 deletions(-)
--- a/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts
+++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts
@@ -90,3 +90,7 @@
};
};
};
+
+&usb3_phy {
+ status = "okay";
+};
--- a/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts
+++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts
@@ -80,3 +80,7 @@
};
};
};
+
+&usb3_phy {
+ status = "okay";
+};
--- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
+++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
@@ -146,3 +146,7 @@
&spi_nor {
status = "okay";
};
+
+&usb3_phy {
+ status = "okay";
+};
--- a/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts
+++ b/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts
@@ -38,3 +38,7 @@
};
};
};
+
+&usb3_phy {
+ status = "okay";
+};
--- a/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts
+++ b/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts
@@ -57,3 +57,7 @@
&spi_nor {
status = "okay";
};
+
+&usb3_phy {
+ status = "okay";
+};
--- a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
+++ b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
@@ -64,3 +64,7 @@
&spi_nor {
status = "okay";
};
+
+&usb3_phy {
+ status = "okay";
+};
--- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
+++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
@@ -91,3 +91,7 @@
&spi_nor {
status = "okay";
};
+
+&usb3_phy {
+ status = "okay";
+};
--- a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
+++ b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
@@ -83,3 +83,7 @@
&spi_nor {
status = "okay";
};
+
+&usb3_phy {
+ status = "okay";
+};
--- a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
+++ b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
@@ -158,3 +158,7 @@
};
};
};
+
+&usb3_phy {
+ status = "okay";
+};
--- a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
+++ b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
@@ -74,3 +74,7 @@
};
};
};
+
+&usb3_phy {
+ status = "okay";
+};
--- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
+++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
@@ -118,3 +118,7 @@
};
};
};
+
+&usb3_phy {
+ status = "okay";
+};
--- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
+++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
@@ -104,3 +104,7 @@
};
};
};
+
+&usb3_phy {
+ status = "okay";
+};
--- a/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts
+++ b/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts
@@ -57,3 +57,7 @@
&spi_nor {
status = "okay";
};
+
+&usb3_phy {
+ status = "okay";
+};
--- a/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts
+++ b/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts
@@ -105,3 +105,7 @@
&spi_nor {
status = "okay";
};
+
+&usb3_phy {
+ status = "okay";
+};
--- a/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts
+++ b/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts
@@ -99,3 +99,7 @@
&usb2 {
vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
};
+
+&usb3_phy {
+ status = "okay";
+};
--- a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
+++ b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
@@ -62,3 +62,7 @@
};
};
};
+
+&usb3_phy {
+ status = "okay";
+};
--- a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
+++ b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
@@ -127,3 +127,7 @@
&spi_nor {
status = "okay";
};
+
+&usb3_phy {
+ status = "okay";
+};
--- a/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts
+++ b/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts
@@ -39,3 +39,7 @@
};
};
};
+
+&usb3_phy {
+ status = "okay";
+};
--- a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
+++ b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
@@ -101,3 +101,7 @@
&usb3 {
vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
};
+
+&usb3_phy {
+ status = "okay";
+};
--- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
+++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
@@ -182,3 +182,7 @@
&usb3 {
vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
};
+
+&usb3_phy {
+ status = "okay";
+};
--- a/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
+++ b/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
@@ -104,3 +104,7 @@
&spi_nor {
status = "okay";
};
+
+&usb3_phy {
+ status = "okay";
+};
--- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
+++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
@@ -115,3 +115,7 @@
&spi_nor {
status = "okay";
};
+
+&usb3_phy {
+ status = "okay";
+};
--- a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
+++ b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
@@ -33,3 +33,7 @@
};
};
};
+
+&usb3_phy {
+ status = "okay";
+};
--- a/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts
+++ b/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts
@@ -60,3 +60,7 @@
&spi_nor {
status = "okay";
};
+
+&usb3_phy {
+ status = "okay";
+};
--- a/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts
+++ b/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts
@@ -60,3 +60,7 @@
&spi_nor {
status = "okay";
};
+
+&usb3_phy {
+ status = "okay";
+};
--- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
+++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
@@ -100,3 +100,7 @@
&spi_nor {
status = "okay";
};
+
+&usb3_phy {
+ status = "okay";
+};
--- a/arch/arm/boot/dts/bcm47094-netgear-r8500.dts
+++ b/arch/arm/boot/dts/bcm47094-netgear-r8500.dts
@@ -91,3 +91,7 @@
};
};
};
+
+&usb3_phy {
+ status = "okay";
+};
--- a/arch/arm/boot/dts/bcm47094.dtsi
+++ b/arch/arm/boot/dts/bcm47094.dtsi
@@ -7,9 +7,10 @@
#include "bcm4708.dtsi"
/ {
- usb3_phy: usb3-phy {
- compatible = "brcm,ns-bx-usb3-phy";
- };
+};
+
+&usb3_phy {
+ compatible = "brcm,ns-bx-usb3-phy";
};
&uart0 {
--- a/arch/arm/boot/dts/bcm5301x.dtsi
+++ b/arch/arm/boot/dts/bcm5301x.dtsi
@@ -154,13 +154,6 @@
clock-names = "phy-ref-clk";
};
- usb3_phy: usb3-phy {
- compatible = "brcm,ns-ax-usb3-phy";
- reg = <0x18105000 0x1000>, <0x18003000 0x1000>;
- reg-names = "dmp", "ccb-mii";
- #phy-cells = <0>;
- };
-
axi@18000000 {
compatible = "brcm,bus-axi";
reg = <0x18000000 0x1000>;
@@ -359,7 +352,33 @@
reg = <0x18003000 0x8>;
#size-cells = <1>;
#address-cells = <0>;
- status = "disabled";
+ };
+
+ mdio-bus-mux {
+ compatible = "mdio-mux-mmioreg";
+ mdio-parent-bus = <&mdio>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x18003000 0x4>;
+ mux-mask = <0x200>;
+
+ mdio@0 {
+ reg = <0x0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ usb3_phy: usb3-phy@10 {
+ compatible = "brcm,ns-ax-usb3-phy";
+ reg = <0x10>;
+ usb3-dmp-syscon = <&usb3_dmp>;
+ #phy-cells = <0>;
+ status = "disabled";
+ };
+ };
+ };
+
+ usb3_dmp: syscon@18105000 {
+ reg = <0x18105000 0x1000>;
};
i2c0: i2c@18009000 {
--- a/arch/arm/boot/dts/bcm94708.dts
+++ b/arch/arm/boot/dts/bcm94708.dts
@@ -42,3 +42,7 @@
reg = <0x00000000 0x08000000>;
};
};
+
+&usb3_phy {
+ status = "okay";
+};
--- a/arch/arm/boot/dts/bcm94709.dts
+++ b/arch/arm/boot/dts/bcm94709.dts
@@ -42,3 +42,7 @@
reg = <0x00000000 0x08000000>;
};
};
+
+&usb3_phy {
+ status = "okay";
+};
--- a/arch/arm/boot/dts/bcm953012er.dts
+++ b/arch/arm/boot/dts/bcm953012er.dts
@@ -90,3 +90,7 @@
};
};
};
+
+&usb3_phy {
+ status = "okay";
+};
--- a/arch/arm/boot/dts/bcm953012hr.dts
+++ b/arch/arm/boot/dts/bcm953012hr.dts
@@ -95,3 +95,7 @@
reg = <0x00700000 0x00900000>;
};
};
+
+&usb3_phy {
+ status = "okay";
+};
--- a/arch/arm/boot/dts/bcm953012k.dts
+++ b/arch/arm/boot/dts/bcm953012k.dts
@@ -113,3 +113,7 @@
&uart1 {
status = "okay";
};
+
+&usb3_phy {
+ status = "okay";
+};

34
target/linux/bcm53xx/patches-4.14/038-v4.19-0002-ARM-dts-BCM53573-Add-architected-timer.patch Normal file
View File

@ -0,0 +1,34 @@
From a21e7548438f3a8f59f9b9f3a8bc973613d3726a Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
Date: Thu, 14 Jun 2018 18:41:47 +0200
Subject: [PATCH] ARM: dts: BCM53573: Add architected timer
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
It's a standard ARM architected timer that was simply missed when
initially adding this .dtsi file.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
arch/arm/boot/dts/bcm53573.dtsi | 8 ++++++++
1 file changed, 8 insertions(+)
--- a/arch/arm/boot/dts/bcm53573.dtsi
+++ b/arch/arm/boot/dts/bcm53573.dtsi
@@ -48,6 +48,14 @@
};
};
+ timer {
+ compatible = "arm,armv7-timer";
+ interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+ };
+
clocks {
#address-cells = <1>;
#size-cells = <1>;

269
target/linux/bcm53xx/patches-4.14/038-v4.19-0003-ARM-dts-BCM5301X-Add-support-for-Linksys-EA9500.patch Normal file
View File

@ -0,0 +1,269 @@
From 2bebdfcdcd0feb58d5df419532a2cedc78a336d7 Mon Sep 17 00:00:00 2001
From: Vivek Unune <npcomplete13@gmail.com>
Date: Mon, 18 Jun 2018 13:41:59 -0400
Subject: [PATCH] ARM: dts: BCM5301X: Add support for Linksys EA9500
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Hardware Info
-------------
Processor - Broadcom BCM4709C0KFEBG dual-core @ 1.4 GHz
Switch - BCM53012 in BCM4709C0KFEBG & external BCM53125
DDR3 RAM - 256 MB
Flash - 128 MB (Toshiba TC58BVG0S3HTA00)
2.4GHz - BCM4366 4×4 2.4/5G single chip 802.11ac SoC
Power Amp - Skyworks SE2623L 2.4 GHz power amp (x4)
5GHz x 2 - BCM4366 4×4 2.4/5G single chip 802.11ac SoC
Power Amp - PLX Technology PEX8603 3-lane, 3-port PCIe switch
Ports - 8 Ports, 1 WAN Ports
Antennas - 8 Antennas
Serial Port - @J6 [GND,TX,RX] (VCC NC) 115200 8n1
Tested with OpenWrt built with DSA driver and Kernel v4.14
Signed-off-by: Vivek Unune <npcomplete13@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
arch/arm/boot/dts/bcm47094-linksys-panamera.dts | 229 ++++++++++++++++++++++++
1 file changed, 229 insertions(+)
--- a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
+++ b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
@@ -31,6 +31,235 @@
linux,code = <KEY_WPS_BUTTON>;
gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
};
+
+ rfkill {
+ label = "WiFi";
+ linux,code = <KEY_RFKILL>;
+ gpios = <&chipcommon 16 GPIO_ACTIVE_LOW>;
+ };
+
+ reset {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ wps {
+ label = "bcm53xx:white:wps";
+ gpios = <&chipcommon 22 GPIO_ACTIVE_LOW>;
+ };
+
+ usb2 {
+ label = "bcm53xx:green:usb2";
+ gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
+ trigger-sources = <&ohci_port2>, <&ehci_port2>;
+ linux,default-trigger = "usbport";
+ };
+
+ usb3 {
+ label = "bcm53xx:green:usb3";
+ gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
+ trigger-sources = <&ohci_port1>, <&ehci_port1>,
+ <&xhci_port1>;
+ linux,default-trigger = "usbport";
+ };
+
+ power {
+ label = "bcm53xx:white:power";
+ gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
+ };
+
+ wifi-disabled {
+ label = "bcm53xx:amber:wifi-disabled";
+ gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
+ };
+
+ wifi-enabled {
+ label = "bcm53xx:white:wifi-enabled";
+ gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
+ };
+
+ bluebar1 {
+ label = "bcm53xx:white:bluebar1";
+ gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>;
+ };
+
+ bluebar2 {
+ label = "bcm53xx:white:bluebar2";
+ gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
+ };
+
+ bluebar3 {
+ label = "bcm53xx:white:bluebar3";
+ gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
+ };
+
+ bluebar4 {
+ label = "bcm53xx:white:bluebar4";
+ gpios = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
+ };
+
+ bluebar5 {
+ label = "bcm53xx:white:bluebar5";
+ gpios = <&chipcommon 19 GPIO_ACTIVE_HIGH>;
+ };
+
+ bluebar6 {
+ label = "bcm53xx:white:bluebar6";
+ gpios = <&chipcommon 20 GPIO_ACTIVE_HIGH>;
+ };
+
+ bluebar7 {
+ label = "bcm53xx:white:bluebar7";
+ gpios = <&chipcommon 21 GPIO_ACTIVE_HIGH>;
+ };
+
+ bluebar8 {
+ label = "bcm53xx:white:bluebar8";
+ gpios = <&chipcommon 8 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ mdio-bus-mux {
+ /* BIT(9) = 1 => external mdio */
+ mdio_ext: mdio@200 {
+ reg = <0x200>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ mdio-mii-mux {
+ compatible = "mdio-mux-mmioreg";
+ mdio-parent-bus = <&mdio_ext>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x1800c1c0 0x4>;
+
+ /* BIT(6) = mdc, BIT(7) = mdio */
+ mux-mask = <0xc0>;
+
+ mdio-mii@0 {
+ /* Enable MII function */
+ reg = <0x0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ switch@0 {
+ compatible = "brcm,bcm53125";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reset-gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
+ reset-names = "robo_reset";
+ reg = <0>;
+ dsa,member = <1 0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ label = "lan1";
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "lan5";
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "lan2";
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "lan6";
+ };
+
+ port@4 {
+ reg = <4>;
+ label = "lan3";
+ };
+
+ sw1_p8: port@8 {
+ reg = <8>;
+ ethernet = <&sw0_p0>;
+ label = "cpu";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+ };
+ };
+ };
+ };
+};
+
+&usb2 {
+ vcc-gpio = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
+};
+
+&usb3 {
+ vcc-gpio = <&chipcommon 14 GPIO_ACTIVE_HIGH>;
+};
+
+&srab {
+ compatible = "brcm,bcm53012-srab", "brcm,bcm5301x-srab";
+ status = "okay";
+ dsa,member = <0 0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@1 {
+ reg = <1>;
+ label = "lan7";
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "lan4";
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "lan8";
+ };
+
+ port@4 {
+ reg = <4>;
+ label = "wan";
+ };
+
+ port@8 {
+ reg = <8>;
+ ethernet = <&gmac2>;
+ label = "cpu";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+
+ sw0_p0: port@0 {
+ reg = <0>;
+ label = "extsw";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
};
};

166
target/linux/bcm53xx/patches-4.14/130-ARM-dts-BCM5301X-Specify-flash-partitions.patch Normal file
View File

@ -0,0 +1,166 @@
From ed4728d9fa0b19687caa964cf5c2082b80208167 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
Date: Sat, 28 Jul 2018 13:25:48 +0200
Subject: [PATCH] ARM: dts: BCM5301X: Specify flash partitions
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Most devices use Broadcom standard partitions which allows them to be
described with the "brcm,bcm947xx-cfe-partitions". Exceptions are:
1) TP-LINK devices which use "os-image" partition with TRX containing
kernel only + separated rootfs partition.
2) Asus RT-AC87U with custom "asus" partition.
This commit also removes undocumented and unsupported linux,part-probe
binding which got accidentally upstreamed while describing SPI
controller.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
---
arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts | 28 +++++++++++++++++++
arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts | 31 ++++++++++++++++++++++
arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts | 28 +++++++++++++++++++
arch/arm/boot/dts/bcm5301x-nand-cs0.dtsi | 4 +++
arch/arm/boot/dts/bcm5301x.dtsi | 5 +++-
5 files changed, 95 insertions(+), 1 deletion(-)
--- a/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts
+++ b/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts
@@ -94,6 +94,34 @@
&spi_nor {
status = "okay";
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ boot@0 {
+ label = "boot";
+ reg = <0x000000 0x040000>;
+ read-only;
+ };
+
+ os-image@100000 {
+ label = "os-image";
+ reg = <0x040000 0x200000>;
+ compatible = "brcm,trx";
+ };
+
+ rootfs@240000 {
+ label = "rootfs";
+ reg = <0x240000 0xc00000>;
+ };
+
+ nvram@ff0000 {
+ label = "nvram";
+ reg = <0xff0000 0x010000>;
+ };
+ };
};
&usb2 {
--- a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
+++ b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
@@ -66,3 +66,34 @@
&usb3_phy {
status = "okay";
};
+
+&nandcs {
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ boot@0 {
+ label = "boot";
+ reg = <0x00000000 0x00080000>;
+ read-only;
+ };
+
+ nvram@80000 {
+ label = "nvram";
+ reg = <0x00080000 0x00180000>;
+ };
+
+ firmware@200000 {
+ label = "firmware";
+ reg = <0x00200000 0x07cc0000>;
+ compatible = "brcm,trx";
+ };
+
+ asus@7ec0000 {
+ label = "asus";
+ reg = <0x07ec0000 0x00140000>;
+ read-only;
+ };
+ };
+};
--- a/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
+++ b/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
@@ -103,6 +103,34 @@
&spi_nor {
status = "okay";
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ boot@0 {
+ label = "boot";
+ reg = <0x000000 0x040000>;
+ read-only;
+ };
+
+ os-image@100000 {
+ label = "os-image";
+ reg = <0x040000 0x200000>;
+ compatible = "brcm,trx";
+ };
+
+ rootfs@240000 {
+ label = "rootfs";
+ reg = <0x240000 0xc00000>;
+ };
+
+ nvram@ff0000 {
+ label = "nvram";
+ reg = <0xff0000 0x010000>;
+ };
+ };
};
&usb3_phy {
--- a/arch/arm/boot/dts/bcm5301x-nand-cs0.dtsi
+++ b/arch/arm/boot/dts/bcm5301x-nand-cs0.dtsi
@@ -12,6 +12,10 @@
reg = <0>;
#address-cells = <1>;
#size-cells = <1>;
+
+ partitions {
+ compatible = "brcm,bcm947xx-cfe-partitions";
+ };
};
};
};
--- a/arch/arm/boot/dts/bcm5301x.dtsi
+++ b/arch/arm/boot/dts/bcm5301x.dtsi
@@ -475,8 +475,11 @@
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <20000000>;
- linux,part-probe = "ofpart", "bcm47xxpart";
status = "disabled";
+
+ partitions {
+ compatible = "brcm,bcm947xx-cfe-partitions";
+ };
};
};

95
target/linux/bcm53xx/patches-4.14/130-ARM-dts-BCM5301X-add-missing-LEDs-for-Buffalo-WZR-90.patch
View File

@ -1,95 +0,0 @@
From c830b958f52fc666919439d6f8f6caa8b6844d44 Mon Sep 17 00:00:00 2001
From: INAGAKI Hiroshi <musashino.open@gmail.com>
Date: Wed, 7 Mar 2018 20:33:56 +0900
Subject: [PATCH] ARM: dts: BCM5301X: add missing LEDs for Buffalo WZR-900DHP
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Buffalo WZR-900DHP has 8 LEDs, but there is not LED definitions in the
dts and cannot configure these LEDs.
I Added missing LED definitions for WZR-900DHP.
Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
Reviewed-by: Rafał Miłecki <rafal@milecki.pl>
---
arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts | 68 +++++++++++++++++++++++
1 file changed, 68 insertions(+)
--- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
+++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
@@ -35,6 +35,74 @@
0x88000000 0x08000000>;
};
+ spi {
+ compatible = "spi-gpio";
+ num-chipselects = <1>;
+ gpio-sck = <&chipcommon 7 0>;
+ gpio-mosi = <&chipcommon 4 0>;
+ cs-gpios = <&chipcommon 6 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ hc595: gpio_spi@0 {
+ compatible = "fairchild,74hc595";
+ reg = <0>;
+ registers-number = <1>;
+ spi-max-frequency = <100000>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ usb {
+ label = "bcm53xx:green:usb";
+ gpios = <&hc595 0 GPIO_ACTIVE_HIGH>;
+ };
+
+ power0 {
+ label = "bcm53xx:green:power";
+ gpios = <&hc595 1 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "default-on";
+ };
+
+ power1 {
+ label = "bcm53xx:red:power";
+ gpios = <&hc595 2 GPIO_ACTIVE_HIGH>;
+ };
+
+ router0 {
+ label = "bcm53xx:green:router";
+ gpios = <&hc595 3 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "default-on";
+ };
+
+ router1 {
+ label = "bcm53xx:amber:router";
+ gpios = <&hc595 4 GPIO_ACTIVE_HIGH>;
+ };
+
+ wan {
+ label = "bcm53xx:green:wan";
+ gpios = <&hc595 5 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "default-on";
+ };
+
+ wireless0 {
+ label = "bcm53xx:green:wireless";
+ gpios = <&hc595 6 GPIO_ACTIVE_HIGH>;
+ };
+
+ wireless1 {
+ label = "bcm53xx:amber:wireless";
+ gpios = <&hc595 7 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
gpio-keys {
compatible = "gpio-keys";
#address-cells = <1>;

2
target/linux/bcm53xx/patches-4.14/180-usb-xhci-add-support-for-performing-fake-doorbell.patch
View File

@ -127,7 +127,7 @@ it on BCM4708 family.
/*
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1831,6 +1831,7 @@ struct xhci_hcd {
@@ -1835,6 +1835,7 @@ struct xhci_hcd {
#define XHCI_LIMIT_ENDPOINT_INTERVAL_7 (1 << 26)
#define XHCI_U2_DISABLE_WAKE (1 << 27)
#define XHCI_ASMEDIA_MODIFY_FLOWCONTROL (1 << 28)

2
target/linux/bcm53xx/patches-4.14/311-ARM-BCM5301X-Add-power-button-for-Buffalo-WZR-1750DHP.patch
View File

@ -5,7 +5,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
---
--- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
+++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
@@ -102,6 +102,12 @@
@@ -101,6 +101,12 @@
#address-cells = <1>;
#size-cells = <0>;

28
target/linux/bcm53xx/patches-4.14/320-ARM-dts-BCM5301X-Add-serial-to-the-bootargs.patch
View File

@ -15,7 +15,7 @@ Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
--- a/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts
+++ b/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts
@@ -13,7 +13,7 @@
@@ -12,7 +12,7 @@
model = "TP-LINK Archer C5 V2";
chosen {
@ -26,7 +26,7 @@ Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
memory {
--- a/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts
+++ b/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts
@@ -14,7 +14,7 @@
@@ -13,7 +13,7 @@
model = "Luxul ABR-4500 V1";
chosen {
@ -37,7 +37,7 @@ Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
memory {
--- a/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts
+++ b/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts
@@ -14,7 +14,7 @@
@@ -13,7 +13,7 @@
model = "Luxul XBR-4500 V1";
chosen {
@ -67,4 +67,26 @@ Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
+ bootargs = "console=ttyS0,115200 earlycon";
};
memory {
--- a/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts
+++ b/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts
@@ -12,7 +12,7 @@
model = "Luxul XAP-1610 V1";
chosen {
- bootargs = "earlycon";
+ bootargs = "console=ttyS0,115200 earlycon";
};
memory {
--- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
+++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
@@ -13,7 +13,7 @@
model = "Luxul XWR-3150 V1";
chosen {
- bootargs = "earlycon";
+ bootargs = "console=ttyS0,115200 earlycon";
};
memory {

110
target/linux/bcm53xx/patches-4.14/390-Revert-ARM-dts-BCM5301X-convert-to-iProc-QSPI.patch
View File

@ -1,110 +0,0 @@
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
Date: Fri, 29 Dec 2017 20:26:51 +0100
Subject: [PATCH] Revert "ARM: dts: BCM5301X: convert to iProc QSPI"
This reverts commit 1c8f4065072387d3b6ee7adcf0dbe3c7ba80c268.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
---
--- a/arch/arm/boot/dts/bcm5301x.dtsi
+++ b/arch/arm/boot/dts/bcm5301x.dtsi
@@ -337,6 +337,20 @@
};
};
+ spi@29000 {
+ reg = <0x00029000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ spi_nor: spi-nor@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <20000000>;
+ linux,part-probe = "ofpart", "bcm47xxpart";
+ status = "disabled";
+ };
+ };
+
gmac0: ethernet@24000 {
reg = <0x24000 0x800>;
};
@@ -425,42 +439,6 @@
brcm,nand-has-wp;
};
- spi@18029200 {
- compatible = "brcm,spi-bcm-qspi", "brcm,spi-nsp-qspi";
- reg = <0x18029200 0x184>,
- <0x18029000 0x124>,
- <0x1811b408 0x004>,
- <0x180293a0 0x01c>;
- reg-names = "mspi", "bspi", "intr_regs", "intr_status_reg";
- interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "spi_lr_fullness_reached",
- "spi_lr_session_aborted",
- "spi_lr_impatient",
- "spi_lr_session_done",
- "spi_lr_overhead",
- "mspi_done",
- "mspi_halted";
- clocks = <&iprocmed>;
- clock-names = "iprocmed";
- num-cs = <2>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- spi_nor: spi-nor@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <20000000>;
- linux,part-probe = "ofpart", "bcm47xxpart";
- status = "disabled";
- };
- };
-
thermal-zones {
cpu_thermal: cpu-thermal {
polling-delay-passive = <0>;
--- a/arch/arm/boot/dts/bcm953012k.dts
+++ b/arch/arm/boot/dts/bcm953012k.dts
@@ -80,32 +80,6 @@
};
};
-&spi_nor {
- status = "okay";
- spi-max-frequency = <62500000>;
- m25p,default-addr-width = <3>;
-
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "boot";
- reg = <0x00000000 0x000d0000>;
- };
- partition@d000 {
- label = "env";
- reg = <0x000d0000 0x00030000>;
- };
- partition@100000 {
- label = "system";
- reg = <0x00100000 0x00600000>;
- };
- partition@700000 {
- label = "rootfs";
- reg = <0x00700000 0x00900000>;
- };
-};
-
&uart0 {
status = "okay";
};

2
target/linux/bcm53xx/patches-4.14/400-mtd-spi-nor-detect-JEDEC-incompatible-w25q128-using-.patch
View File

@ -13,7 +13,7 @@ Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
--- a/drivers/mtd/spi-nor/spi-nor.c
+++ b/drivers/mtd/spi-nor/spi-nor.c
@@ -1210,6 +1210,18 @@ static const struct flash_info *spi_nor_
@@ -1209,6 +1209,18 @@ static const struct flash_info *spi_nor_
}
dev_err(nor->dev, "unrecognized JEDEC id bytes: %02x, %02x, %02x\n",
id[0], id[1], id[2]);

53
target/linux/bcm53xx/patches-4.14/410-Use-brcm-bcm947xx-cfe-partitions-binding-for-Broadco.patch
View File

@ -1,53 +0,0 @@
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
Subject: [PATCH] Use "brcm,bcm947xx-cfe-partitions" binding for Broadcom
partitions
---
--- a/arch/arm/boot/dts/bcm5301x-nand-cs0.dtsi
+++ b/arch/arm/boot/dts/bcm5301x-nand-cs0.dtsi
@@ -13,6 +13,10 @@
reg = <0>;
#address-cells = <1>;
#size-cells = <1>;
+
+ partitions {
+ compatible = "brcm,bcm947xx-cfe-partitions";
+ };
};
};
};
--- a/arch/arm/boot/dts/bcm5301x.dtsi
+++ b/arch/arm/boot/dts/bcm5301x.dtsi
@@ -346,8 +346,11 @@
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <20000000>;
- linux,part-probe = "ofpart", "bcm47xxpart";
status = "disabled";
+
+ partitions {
+ compatible = "brcm,bcm947xx-cfe-partitions";
+ };
};
};
--- a/drivers/mtd/bcm47xxpart.c
+++ b/drivers/mtd/bcm47xxpart.c
@@ -300,9 +300,16 @@ static int bcm47xxpart_parse(struct mtd_
return curr_part;
};
+static const struct of_device_id bcm47xxpart_of_match_table[] = {
+ { .compatible = "brcm,bcm947xx-cfe-partitions" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, bcm47xxpart_of_match_table);
+
static struct mtd_part_parser bcm47xxpart_mtd_parser = {
.parse_fn = bcm47xxpart_parse,
.name = "bcm47xxpart",
+ .of_match_table = bcm47xxpart_of_match_table,
};
module_mtd_part_parser(bcm47xxpart_mtd_parser);

146
target/linux/bcm53xx/patches-4.14/800-Revert-spi-bcm-qspi-Fix-bcm_qspi_bspi_read-performan.patch Normal file
View File

@ -0,0 +1,146 @@
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
Subject: [PATCH] Revert "spi: bcm-qspi: Fix bcm_qspi_bspi_read() performance"
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
This reverts commit 345309fa7c0c9206a5344d379b174499952d79d9.
BSPI reads became unstable starting with above commit. There are BSPI
timeouts like this:
[ 15.637809] bcm_iproc 18029200.spi: timeout waiting for BSPI
(...)
[ 15.997809] bcm_iproc 18029200.spi: timeout waiting for BSPI
which cause filesystem stability problems.
Before above commit every time that bcm_qspi_bspi_lr_l2_isr() called
bcm_qspi_bspi_lr_l2_isr() it was resulting in bspi_rf_msg_len becoming
0.
With that change it's not the case anymore which suggests there may be
some bug around that code.
It has changed and the new behavior seems to be causing problems.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
---
--- a/drivers/spi/spi-bcm-qspi.c
+++ b/drivers/spi/spi-bcm-qspi.c
@@ -88,7 +88,7 @@
#define BSPI_BPP_MODE_SELECT_MASK BIT(8)
#define BSPI_BPP_ADDR_SELECT_MASK BIT(16)
-#define BSPI_READ_LENGTH 512
+#define BSPI_READ_LENGTH 256
/* MSPI register offsets */
#define MSPI_SPCR0_LSB 0x000
@@ -806,7 +806,7 @@ static int bcm_qspi_bspi_flash_read(stru
struct spi_flash_read_message *msg)
{
struct bcm_qspi *qspi = spi_master_get_devdata(spi->master);
- u32 addr = 0, len, rdlen, len_words;
+ u32 addr = 0, len, len_words;
int ret = 0;
unsigned long timeo = msecs_to_jiffies(100);
struct bcm_qspi_soc_intc *soc_intc = qspi->soc_intc;
@@ -819,7 +819,7 @@ static int bcm_qspi_bspi_flash_read(stru
bcm_qspi_write(qspi, MSPI, MSPI_WRITE_LOCK, 0);
/*
- * when using flex mode we need to send
+ * when using flex mode mode we need to send
* the upper address byte to bspi
*/
if (bcm_qspi_bspi_ver_three(qspi) == false) {
@@ -833,56 +833,47 @@ static int bcm_qspi_bspi_flash_read(stru
else
addr = msg->from & 0x00ffffff;
+ /* set BSPI RAF buffer max read length */
+ len = msg->len;
+ if (len > BSPI_READ_LENGTH)
+ len = BSPI_READ_LENGTH;
+
if (bcm_qspi_bspi_ver_three(qspi) == true)
addr = (addr + 0xc00000) & 0xffffff;
- /*
- * read into the entire buffer by breaking the reads
- * into RAF buffer read lengths
- */
- len = msg->len;
+ reinit_completion(&qspi->bspi_done);
+ bcm_qspi_enable_bspi(qspi);
+ len_words = (len + 3) >> 2;
+ qspi->bspi_rf_msg = msg;
+ qspi->bspi_rf_msg_status = 0;
qspi->bspi_rf_msg_idx = 0;
+ qspi->bspi_rf_msg_len = len;
+ dev_dbg(&qspi->pdev->dev, "bspi xfr addr 0x%x len 0x%x", addr, len);
- do {
- if (len > BSPI_READ_LENGTH)
- rdlen = BSPI_READ_LENGTH;
- else
- rdlen = len;
-
- reinit_completion(&qspi->bspi_done);
- bcm_qspi_enable_bspi(qspi);
- len_words = (rdlen + 3) >> 2;
- qspi->bspi_rf_msg = msg;
- qspi->bspi_rf_msg_status = 0;
- qspi->bspi_rf_msg_len = rdlen;
- dev_dbg(&qspi->pdev->dev,
- "bspi xfr addr 0x%x len 0x%x", addr, rdlen);
- bcm_qspi_write(qspi, BSPI, BSPI_RAF_START_ADDR, addr);
- bcm_qspi_write(qspi, BSPI, BSPI_RAF_NUM_WORDS, len_words);
- bcm_qspi_write(qspi, BSPI, BSPI_RAF_WATERMARK, 0);
- if (qspi->soc_intc) {
- /*
- * clear soc MSPI and BSPI interrupts and enable
- * BSPI interrupts.
- */
- soc_intc->bcm_qspi_int_ack(soc_intc, MSPI_BSPI_DONE);
- soc_intc->bcm_qspi_int_set(soc_intc, BSPI_DONE, true);
- }
+ bcm_qspi_write(qspi, BSPI, BSPI_RAF_START_ADDR, addr);
+ bcm_qspi_write(qspi, BSPI, BSPI_RAF_NUM_WORDS, len_words);
+ bcm_qspi_write(qspi, BSPI, BSPI_RAF_WATERMARK, 0);
+
+ if (qspi->soc_intc) {
+ /*
+ * clear soc MSPI and BSPI interrupts and enable
+ * BSPI interrupts.
+ */
+ soc_intc->bcm_qspi_int_ack(soc_intc, MSPI_BSPI_DONE);
+ soc_intc->bcm_qspi_int_set(soc_intc, BSPI_DONE, true);
+ }
- /* Must flush previous writes before starting BSPI operation */
- mb();
- bcm_qspi_bspi_lr_start(qspi);
- if (!wait_for_completion_timeout(&qspi->bspi_done, timeo)) {
- dev_err(&qspi->pdev->dev, "timeout waiting for BSPI\n");
- ret = -ETIMEDOUT;
- break;
- }
+ /* Must flush previous writes before starting BSPI operation */
+ mb();
- /* set msg return length */
- msg->retlen += rdlen;
- addr += rdlen;
- len -= rdlen;
- } while (len);
+ bcm_qspi_bspi_lr_start(qspi);
+ if (!wait_for_completion_timeout(&qspi->bspi_done, timeo)) {
+ dev_err(&qspi->pdev->dev, "timeout waiting for BSPI\n");
+ ret = -ETIMEDOUT;
+ } else {
+ /* set the return length for the caller */
+ msg->retlen = len;
+ }
return ret;
}

56
target/linux/bcm53xx/patches-4.14/900-mtd-bcm47xxpart-add-device-specific-workarounds.patch
View File

@ -1,56 +0,0 @@
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
Subject: [PATCH] mtd: bcm47xxpart: add device specific workarounds
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
---
--- a/drivers/mtd/bcm47xxpart.c
+++ b/drivers/mtd/bcm47xxpart.c
@@ -15,6 +15,7 @@
#include <linux/slab.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
+#include <linux/of.h>
#include <uapi/linux/magic.h>
@@ -134,6 +135,36 @@ static int bcm47xxpart_parse(struct mtd_
break;
}
+ /*
+ * Device specific workarounds (hacks). We should use DT to
+ * define partitions but we need a working TRX firmware splitter
+ * first.
+ */
+ if (of_machine_is_compatible("asus,rt-ac87u") && offset == 0x7ec0000) {
+ /*
+ * "asus" partition uses JFFS2 which we don't detect and
+ * we don't want to as this could affect other devices.
+ */
+ bcm47xxpart_add_part(&parts[curr_part++], "asus", offset, MTD_WRITEABLE);
+ continue;
+ } else if (of_machine_is_compatible("tplink,archer-c5-v2") && offset == 0xe40000) {
+ /*
+ * There is a whole set of partitions (not even listed
+ * by original firmware): "default-mac", "pin",
+ * "partition-table", etc.
+ */
+ bcm47xxpart_add_part(&parts[curr_part++], "tplink", offset, MTD_WRITEABLE);
+ continue;
+ } else if (of_machine_is_compatible("tplink,archer-c9-v1") && offset == 0xe40000) {
+ /*
+ * There is a whole set of partitions (not even listed
+ * by original firmware): "default-mac", "pin",
+ * "partition-table", etc.
+ */
+ bcm47xxpart_add_part(&parts[curr_part++], "tplink", offset, MTD_WRITEABLE);
+ continue;
+ }
+
/* Read beginning of the block */
err = mtd_read(master, offset, BCM47XXPART_BYTES_TO_READ,
&bytes_read, (uint8_t *)buf);

18
target/linux/bcm53xx/patches-4.14/905-BCM53573-minor-hacks.patch
View File

@ -11,22 +11,14 @@ Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
--- a/arch/arm/boot/dts/bcm53573.dtsi
+++ b/arch/arm/boot/dts/bcm53573.dtsi
@@ -48,6 +48,15 @@
};
@@ -54,6 +54,7 @@
<GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
<GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
<GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&ilp>;
};
+ timer {
+ compatible = "arm,armv7-timer";
+ interrupts = <GIC_PPI 13 0>,
+ <GIC_PPI 14 0>,
+ <GIC_PPI 11 0>,
+ <GIC_PPI 10 0>;
+ clocks = <&ilp>;
+ };
+
clocks {
#address-cells = <1>;
#size-cells = <1>;
--- a/drivers/bcma/main.c
+++ b/drivers/bcma/main.c
@@ -348,14 +348,6 @@ static int bcma_register_devices(struct

68
target/linux/bcm53xx/patches-4.4/020-ARM-BCM5301X-remove-workaround-imprecise-abort-fault.patch
View File

@ -1,68 +0,0 @@
From 937b12306ea79044c86f2e69b3061c7279245825 Mon Sep 17 00:00:00 2001
From: Lucas Stach <l.stach@pengutronix.de>
Date: Thu, 15 Oct 2015 12:32:22 +0200
Subject: [PATCH] ARM: BCM5301X: remove workaround imprecise abort fault
handler
This is not needed anymore. Handling a potentially pending imprecise external
abort left behind by the bootloader is now done in a slightly safer way inside
the common ARM startup code.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
Tested-by: Tyler Baker <tyler.baker@linaro.org>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
arch/arm/mach-bcm/bcm_5301x.c | 35 -----------------------------------
1 file changed, 35 deletions(-)
--- a/arch/arm/mach-bcm/bcm_5301x.c
+++ b/arch/arm/mach-bcm/bcm_5301x.c
@@ -9,40 +9,6 @@
#include <asm/hardware/cache-l2x0.h>
#include <asm/mach/arch.h>
-#include <asm/siginfo.h>
-#include <asm/signal.h>
-
-
-static bool first_fault = true;
-
-static int bcm5301x_abort_handler(unsigned long addr, unsigned int fsr,
- struct pt_regs *regs)
-{
- if ((fsr == 0x1406 || fsr == 0x1c06) && first_fault) {
- first_fault = false;
-
- /*
- * These faults with codes 0x1406 (BCM4709) or 0x1c06 happens
- * for no good reason, possibly left over from the CFE boot
- * loader.
- */
- pr_warn("External imprecise Data abort at addr=%#lx, fsr=%#x ignored.\n",
- addr, fsr);
-
- /* Returning non-zero causes fault display and panic */
- return 0;
- }
-
- /* Others should cause a fault */
- return 1;
-}
-
-static void __init bcm5301x_init_early(void)
-{
- /* Install our hook */
- hook_fault_code(16 + 6, bcm5301x_abort_handler, SIGBUS, BUS_OBJERR,
- "imprecise external abort");
-}
static const char *const bcm5301x_dt_compat[] __initconst = {
"brcm,bcm4708",
@@ -52,6 +18,5 @@ static const char *const bcm5301x_dt_com
DT_MACHINE_START(BCM5301X, "BCM5301X")
.l2c_aux_val = 0,
.l2c_aux_mask = ~0,
- .init_early = bcm5301x_init_early,
.dt_compat = bcm5301x_dt_compat,
MACHINE_END

31
target/linux/bcm53xx/patches-4.4/021-ARM-BCM5310X-activate-erratas-needed-for-SoC.patch
View File

@ -1,31 +0,0 @@
From f4ce7effe2253a325f8ba182903cbdf0d8698593 Mon Sep 17 00:00:00 2001
From: Hauke Mehrtens <hauke@hauke-m.de>
Date: Sat, 21 Nov 2015 15:29:47 +0100
Subject: [PATCH] ARM: BCM5310X: activate erratas needed for SoC
The BCM4708 I have, which is probably the first generation which got
to the consumer market, is using a ARM Cortex-A9 rev r3p0 and a
L2C-310 rev r3p2 L2 cache controller. There are 3 workarounds for known
erratas in the Linux kernel which could be activated and will be in
this patch. There are currently no workarounds which have to be
activated for the L2C-310 rev r3p2 in Linux.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
arch/arm/mach-bcm/Kconfig | 4 ++++
1 file changed, 4 insertions(+)
--- a/arch/arm/mach-bcm/Kconfig
+++ b/arch/arm/mach-bcm/Kconfig
@@ -52,6 +52,10 @@ config ARCH_BCM_NSP
config ARCH_BCM_5301X
bool "Broadcom BCM470X / BCM5301X ARM SoC" if ARCH_MULTI_V7
select ARCH_BCM_IPROC
+ select ARM_ERRATA_754322
+ select ARM_ERRATA_775420
+ select ARM_ERRATA_764369 if SMP
+
help
Support for Broadcom BCM470X and BCM5301X SoCs with ARM CPU cores.

254
target/linux/bcm53xx/patches-4.4/022-ARM-BCM-Clean-up-SMP-support-for-Broadcom-Kona.patch
View File

@ -1,254 +0,0 @@
From b5989f783de046577067fe356b1bb76cae07e867 Mon Sep 17 00:00:00 2001
From: Kapil Hali <kapilh@broadcom.com>
Date: Sat, 5 Dec 2015 06:53:41 -0500
Subject: [PATCH] ARM: BCM: Clean up SMP support for Broadcom Kona
These changes cleans up SMP implementaion for Broadcom's
Kona SoC which are required for handling SMP for iProc
family of SoCs at a single place for BCM NSP and BCM Kona.
Signed-off-by: Kapil Hali <kapilh@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
.../bindings/arm/bcm/brcm,bcm11351-cpu-method.txt | 12 ++--
arch/arm/boot/dts/bcm11351.dtsi | 4 +-
arch/arm/boot/dts/bcm21664.dtsi | 4 +-
arch/arm/mach-bcm/kona_smp.c | 82 ++++++++++++++--------
4 files changed, 64 insertions(+), 38 deletions(-)
--- a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm11351-cpu-method.txt
+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm11351-cpu-method.txt
@@ -1,17 +1,17 @@
Broadcom Kona Family CPU Enable Method
--------------------------------------
This binding defines the enable method used for starting secondary
-CPUs in the following Broadcom SoCs:
+CPU in the following Broadcom SoCs:
BCM11130, BCM11140, BCM11351, BCM28145, BCM28155, BCM21664
The enable method is specified by defining the following required
-properties in the "cpus" device tree node:
+properties in the corresponding secondary "cpu" device tree node:
- enable-method = "brcm,bcm11351-cpu-method";
- secondary-boot-reg = <...>;
The secondary-boot-reg property is a u32 value that specifies the
-physical address of the register used to request the ROM holding pen
-code release a secondary CPU. The value written to the register is
+physical address of the register used to request the ROM code
+release a secondary CPU. The value written to the register is
formed by encoding the target CPU id into the low bits of the
physical start address it should jump to.
@@ -19,8 +19,6 @@ Example:
cpus {
#address-cells = <1>;
#size-cells = <0>;
- enable-method = "brcm,bcm11351-cpu-method";
- secondary-boot-reg = <0x3500417c>;
cpu0: cpu@0 {
device_type = "cpu";
@@ -31,6 +29,8 @@ Example:
cpu1: cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a9";
+ enable-method = "brcm,bcm11351-cpu-method";
+ secondary-boot-reg = <0x3500417c>;
reg = <1>;
};
};
--- a/arch/arm/boot/dts/bcm11351.dtsi
+++ b/arch/arm/boot/dts/bcm11351.dtsi
@@ -30,8 +30,6 @@
cpus {
#address-cells = <1>;
#size-cells = <0>;
- enable-method = "brcm,bcm11351-cpu-method";
- secondary-boot-reg = <0x3500417c>;
cpu0: cpu@0 {
device_type = "cpu";
@@ -42,6 +40,8 @@
cpu1: cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a9";
+ enable-method = "brcm,bcm11351-cpu-method";
+ secondary-boot-reg = <0x3500417c>;
reg = <1>;
};
};
--- a/arch/arm/boot/dts/bcm21664.dtsi
+++ b/arch/arm/boot/dts/bcm21664.dtsi
@@ -30,8 +30,6 @@
cpus {
#address-cells = <1>;
#size-cells = <0>;
- enable-method = "brcm,bcm11351-cpu-method";
- secondary-boot-reg = <0x35004178>;
cpu0: cpu@0 {
device_type = "cpu";
@@ -42,6 +40,8 @@
cpu1: cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a9";
+ enable-method = "brcm,bcm11351-cpu-method";
+ secondary-boot-reg = <0x35004178>;
reg = <1>;
};
};
--- a/arch/arm/mach-bcm/kona_smp.c
+++ b/arch/arm/mach-bcm/kona_smp.c
@@ -1,5 +1,5 @@
/*
- * Copyright (C) 2014 Broadcom Corporation
+ * Copyright (C) 2014-2015 Broadcom Corporation
* Copyright 2014 Linaro Limited
*
* This program is free software; you can redistribute it and/or
@@ -30,9 +30,10 @@
/* Name of device node property defining secondary boot register location */
#define OF_SECONDARY_BOOT "secondary-boot-reg"
+#define MPIDR_CPUID_BITMASK 0x3
/* I/O address of register used to coordinate secondary core startup */
-static u32 secondary_boot;
+static u32 secondary_boot_addr;
/*
* Enable the Cortex A9 Snoop Control Unit
@@ -78,44 +79,68 @@ static int __init scu_a9_enable(void)
static void __init bcm_smp_prepare_cpus(unsigned int max_cpus)
{
static cpumask_t only_cpu_0 = { CPU_BITS_CPU0 };
- struct device_node *node;
+ struct device_node *cpus_node = NULL;
+ struct device_node *cpu_node = NULL;
int ret;
- BUG_ON(secondary_boot); /* We're called only once */
-
/*
* This function is only called via smp_ops->smp_prepare_cpu().
* That only happens if a "/cpus" device tree node exists
* and has an "enable-method" property that selects the SMP
* operations defined herein.
*/
- node = of_find_node_by_path("/cpus");
- BUG_ON(!node);
-
- /*
- * Our secondary enable method requires a "secondary-boot-reg"
- * property to specify a register address used to request the
- * ROM code boot a secondary code. If we have any trouble
- * getting this we fall back to uniprocessor mode.
- */
- if (of_property_read_u32(node, OF_SECONDARY_BOOT, &secondary_boot)) {
- pr_err("%s: missing/invalid " OF_SECONDARY_BOOT " property\n",
- node->name);
- ret = -ENOENT; /* Arrange to disable SMP */
- goto out;
+ cpus_node = of_find_node_by_path("/cpus");
+ if (!cpus_node)
+ return;
+
+ for_each_child_of_node(cpus_node, cpu_node) {
+ u32 cpuid;
+
+ if (of_node_cmp(cpu_node->type, "cpu"))
+ continue;
+
+ if (of_property_read_u32(cpu_node, "reg", &cpuid)) {
+ pr_debug("%s: missing reg property\n",
+ cpu_node->full_name);
+ ret = -ENOENT;
+ goto out;
+ }
+
+ /*
+ * "secondary-boot-reg" property should be defined only
+ * for secondary cpu
+ */
+ if ((cpuid & MPIDR_CPUID_BITMASK) == 1) {
+ /*
+ * Our secondary enable method requires a
+ * "secondary-boot-reg" property to specify a register
+ * address used to request the ROM code boot a secondary
+ * core. If we have any trouble getting this we fall
+ * back to uniprocessor mode.
+ */
+ if (of_property_read_u32(cpu_node,
+ OF_SECONDARY_BOOT,
+ &secondary_boot_addr)) {
+ pr_warn("%s: no" OF_SECONDARY_BOOT "property\n",
+ cpu_node->name);
+ ret = -ENOENT;
+ goto out;
+ }
+ }
}
/*
- * Enable the SCU on Cortex A9 based SoCs. If -ENOENT is
+ * Enable the SCU on Cortex A9 based SoCs. If -ENOENT is
* returned, the SoC reported a uniprocessor configuration.
* We bail on any other error.
*/
ret = scu_a9_enable();
out:
- of_node_put(node);
+ of_node_put(cpu_node);
+ of_node_put(cpus_node);
+
if (ret) {
/* Update the CPU present map to reflect uniprocessor mode */
- BUG_ON(ret != -ENOENT);
pr_warn("disabling SMP\n");
init_cpu_present(&only_cpu_0);
}
@@ -139,7 +164,7 @@ out:
* - Wait for the secondary boot register to be re-written, which
* indicates the secondary core has started.
*/
-static int bcm_boot_secondary(unsigned int cpu, struct task_struct *idle)
+static int kona_boot_secondary(unsigned int cpu, struct task_struct *idle)
{
void __iomem *boot_reg;
phys_addr_t boot_func;
@@ -154,15 +179,16 @@ static int bcm_boot_secondary(unsigned i
return -EINVAL;
}
- if (!secondary_boot) {
+ if (!secondary_boot_addr) {
pr_err("required secondary boot register not specified\n");
return -EINVAL;
}
- boot_reg = ioremap_nocache((phys_addr_t)secondary_boot, sizeof(u32));
+ boot_reg = ioremap_nocache(
+ (phys_addr_t)secondary_boot_addr, sizeof(u32));
if (!boot_reg) {
pr_err("unable to map boot register for cpu %u\n", cpu_id);
- return -ENOSYS;
+ return -ENOMEM;
}
/*
@@ -191,12 +217,12 @@ static int bcm_boot_secondary(unsigned i
pr_err("timeout waiting for cpu %u to start\n", cpu_id);
- return -ENOSYS;
+ return -ENXIO;
}
static struct smp_operations bcm_smp_ops __initdata = {
.smp_prepare_cpus = bcm_smp_prepare_cpus,
- .smp_boot_secondary = bcm_boot_secondary,
+ .smp_boot_secondary = kona_boot_secondary,
};
CPU_METHOD_OF_DECLARE(bcm_smp_bcm281xx, "brcm,bcm11351-cpu-method",
&bcm_smp_ops);

585
target/linux/bcm53xx/patches-4.4/023-ARM-BCM-Add-SMP-support-for-Broadcom-NSP.patch
View File

@ -1,585 +0,0 @@
From 55be958cd27439a58c4d9369d6fe2a1f83efdaa6 Mon Sep 17 00:00:00 2001
From: Kapil Hali <kapilh@broadcom.com>
Date: Sat, 5 Dec 2015 06:53:43 -0500
Subject: [PATCH] ARM: BCM: Add SMP support for Broadcom NSP
Add SMP support for Broadcom's Northstar Plus SoC
cpu enable method. This changes also consolidates
iProc family's - BCM NSP and BCM Kona, platform
SMP handling in a common file.
Northstar Plus SoC is based on ARM Cortex-A9
revision r3p0 which requires configuration for ARM
Errata 764369 for SMP. This change adds the needed
configuration option.
Signed-off-by: Kapil Hali <kapilh@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
arch/arm/mach-bcm/Kconfig | 2 +
arch/arm/mach-bcm/Makefile | 8 +-
arch/arm/mach-bcm/kona_smp.c | 228 ----------------------------------
arch/arm/mach-bcm/platsmp.c | 290 +++++++++++++++++++++++++++++++++++++++++++
4 files changed, 298 insertions(+), 230 deletions(-)
delete mode 100644 arch/arm/mach-bcm/kona_smp.c
create mode 100644 arch/arm/mach-bcm/platsmp.c
--- a/arch/arm/mach-bcm/Kconfig
+++ b/arch/arm/mach-bcm/Kconfig
@@ -40,6 +40,8 @@ config ARCH_BCM_NSP
select ARCH_BCM_IPROC
select ARM_ERRATA_754322
select ARM_ERRATA_775420
+ select ARM_ERRATA_764369 if SMP
+ select HAVE_SMP
help
Support for Broadcom Northstar Plus SoC.
Broadcom Northstar Plus family of SoCs are used for switching control
--- a/arch/arm/mach-bcm/Makefile
+++ b/arch/arm/mach-bcm/Makefile
@@ -14,7 +14,11 @@
obj-$(CONFIG_ARCH_BCM_CYGNUS) += bcm_cygnus.o
# Northstar Plus
-obj-$(CONFIG_ARCH_BCM_NSP) += bcm_nsp.o
+obj-$(CONFIG_ARCH_BCM_NSP) += bcm_nsp.o
+
+ifeq ($(CONFIG_ARCH_BCM_NSP),y)
+obj-$(CONFIG_SMP) += platsmp.o
+endif
# BCM281XX
obj-$(CONFIG_ARCH_BCM_281XX) += board_bcm281xx.o
@@ -23,7 +27,7 @@ obj-$(CONFIG_ARCH_BCM_281XX) += board_bc
obj-$(CONFIG_ARCH_BCM_21664) += board_bcm21664.o
# BCM281XX and BCM21664 SMP support
-obj-$(CONFIG_ARCH_BCM_MOBILE_SMP) += kona_smp.o
+obj-$(CONFIG_ARCH_BCM_MOBILE_SMP) += platsmp.o
# BCM281XX and BCM21664 L2 cache control
obj-$(CONFIG_ARCH_BCM_MOBILE_L2_CACHE) += kona_l2_cache.o
--- a/arch/arm/mach-bcm/kona_smp.c
+++ /dev/null
@@ -1,228 +0,0 @@
-/*
- * Copyright (C) 2014-2015 Broadcom Corporation
- * Copyright 2014 Linaro Limited
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/io.h>
-#include <linux/of.h>
-#include <linux/sched.h>
-
-#include <asm/smp.h>
-#include <asm/smp_plat.h>
-#include <asm/smp_scu.h>
-
-/* Size of mapped Cortex A9 SCU address space */
-#define CORTEX_A9_SCU_SIZE 0x58
-
-#define SECONDARY_TIMEOUT_NS NSEC_PER_MSEC /* 1 msec (in nanoseconds) */
-#define BOOT_ADDR_CPUID_MASK 0x3
-
-/* Name of device node property defining secondary boot register location */
-#define OF_SECONDARY_BOOT "secondary-boot-reg"
-#define MPIDR_CPUID_BITMASK 0x3
-
-/* I/O address of register used to coordinate secondary core startup */
-static u32 secondary_boot_addr;
-
-/*
- * Enable the Cortex A9 Snoop Control Unit
- *
- * By the time this is called we already know there are multiple
- * cores present. We assume we're running on a Cortex A9 processor,
- * so any trouble getting the base address register or getting the
- * SCU base is a problem.
- *
- * Return 0 if successful or an error code otherwise.
- */
-static int __init scu_a9_enable(void)
-{
- unsigned long config_base;
- void __iomem *scu_base;
-
- if (!scu_a9_has_base()) {
- pr_err("no configuration base address register!\n");
- return -ENXIO;
- }
-
- /* Config base address register value is zero for uniprocessor */
- config_base = scu_a9_get_base();
- if (!config_base) {
- pr_err("hardware reports only one core\n");
- return -ENOENT;
- }
-
- scu_base = ioremap((phys_addr_t)config_base, CORTEX_A9_SCU_SIZE);
- if (!scu_base) {
- pr_err("failed to remap config base (%lu/%u) for SCU\n",
- config_base, CORTEX_A9_SCU_SIZE);
- return -ENOMEM;
- }
-
- scu_enable(scu_base);
-
- iounmap(scu_base); /* That's the last we'll need of this */
-
- return 0;
-}
-
-static void __init bcm_smp_prepare_cpus(unsigned int max_cpus)
-{
- static cpumask_t only_cpu_0 = { CPU_BITS_CPU0 };
- struct device_node *cpus_node = NULL;
- struct device_node *cpu_node = NULL;
- int ret;
-
- /*
- * This function is only called via smp_ops->smp_prepare_cpu().
- * That only happens if a "/cpus" device tree node exists
- * and has an "enable-method" property that selects the SMP
- * operations defined herein.
- */
- cpus_node = of_find_node_by_path("/cpus");
- if (!cpus_node)
- return;
-
- for_each_child_of_node(cpus_node, cpu_node) {
- u32 cpuid;
-
- if (of_node_cmp(cpu_node->type, "cpu"))
- continue;
-
- if (of_property_read_u32(cpu_node, "reg", &cpuid)) {
- pr_debug("%s: missing reg property\n",
- cpu_node->full_name);
- ret = -ENOENT;
- goto out;
- }
-
- /*
- * "secondary-boot-reg" property should be defined only
- * for secondary cpu
- */
- if ((cpuid & MPIDR_CPUID_BITMASK) == 1) {
- /*
- * Our secondary enable method requires a
- * "secondary-boot-reg" property to specify a register
- * address used to request the ROM code boot a secondary
- * core. If we have any trouble getting this we fall
- * back to uniprocessor mode.
- */
- if (of_property_read_u32(cpu_node,
- OF_SECONDARY_BOOT,
- &secondary_boot_addr)) {
- pr_warn("%s: no" OF_SECONDARY_BOOT "property\n",
- cpu_node->name);
- ret = -ENOENT;
- goto out;
- }
- }
- }
-
- /*
- * Enable the SCU on Cortex A9 based SoCs. If -ENOENT is
- * returned, the SoC reported a uniprocessor configuration.
- * We bail on any other error.
- */
- ret = scu_a9_enable();
-out:
- of_node_put(cpu_node);
- of_node_put(cpus_node);
-
- if (ret) {
- /* Update the CPU present map to reflect uniprocessor mode */
- pr_warn("disabling SMP\n");
- init_cpu_present(&only_cpu_0);
- }
-}
-
-/*
- * The ROM code has the secondary cores looping, waiting for an event.
- * When an event occurs each core examines the bottom two bits of the
- * secondary boot register. When a core finds those bits contain its
- * own core id, it performs initialization, including computing its boot
- * address by clearing the boot register value's bottom two bits. The
- * core signals that it is beginning its execution by writing its boot
- * address back to the secondary boot register, and finally jumps to
- * that address.
- *
- * So to start a core executing we need to:
- * - Encode the (hardware) CPU id with the bottom bits of the secondary
- * start address.
- * - Write that value into the secondary boot register.
- * - Generate an event to wake up the secondary CPU(s).
- * - Wait for the secondary boot register to be re-written, which
- * indicates the secondary core has started.
- */
-static int kona_boot_secondary(unsigned int cpu, struct task_struct *idle)
-{
- void __iomem *boot_reg;
- phys_addr_t boot_func;
- u64 start_clock;
- u32 cpu_id;
- u32 boot_val;
- bool timeout = false;
-
- cpu_id = cpu_logical_map(cpu);
- if (cpu_id & ~BOOT_ADDR_CPUID_MASK) {
- pr_err("bad cpu id (%u > %u)\n", cpu_id, BOOT_ADDR_CPUID_MASK);
- return -EINVAL;
- }
-
- if (!secondary_boot_addr) {
- pr_err("required secondary boot register not specified\n");
- return -EINVAL;
- }
-
- boot_reg = ioremap_nocache(
- (phys_addr_t)secondary_boot_addr, sizeof(u32));
- if (!boot_reg) {
- pr_err("unable to map boot register for cpu %u\n", cpu_id);
- return -ENOMEM;
- }
-
- /*
- * Secondary cores will start in secondary_startup(),
- * defined in "arch/arm/kernel/head.S"
- */
- boot_func = virt_to_phys(secondary_startup);
- BUG_ON(boot_func & BOOT_ADDR_CPUID_MASK);
- BUG_ON(boot_func > (phys_addr_t)U32_MAX);
-
- /* The core to start is encoded in the low bits */
- boot_val = (u32)boot_func | cpu_id;
- writel_relaxed(boot_val, boot_reg);
-
- sev();
-
- /* The low bits will be cleared once the core has started */
- start_clock = local_clock();
- while (!timeout && readl_relaxed(boot_reg) == boot_val)
- timeout = local_clock() - start_clock > SECONDARY_TIMEOUT_NS;
-
- iounmap(boot_reg);
-
- if (!timeout)
- return 0;
-
- pr_err("timeout waiting for cpu %u to start\n", cpu_id);
-
- return -ENXIO;
-}
-
-static struct smp_operations bcm_smp_ops __initdata = {
- .smp_prepare_cpus = bcm_smp_prepare_cpus,
- .smp_boot_secondary = kona_boot_secondary,
-};
-CPU_METHOD_OF_DECLARE(bcm_smp_bcm281xx, "brcm,bcm11351-cpu-method",
- &bcm_smp_ops);
--- /dev/null
+++ b/arch/arm/mach-bcm/platsmp.c
@@ -0,0 +1,290 @@
+/*
+ * Copyright (C) 2014-2015 Broadcom Corporation
+ * Copyright 2014 Linaro Limited
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/cpumask.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/jiffies.h>
+#include <linux/of.h>
+#include <linux/sched.h>
+#include <linux/smp.h>
+
+#include <asm/cacheflush.h>
+#include <asm/smp.h>
+#include <asm/smp_plat.h>
+#include <asm/smp_scu.h>
+
+/* Size of mapped Cortex A9 SCU address space */
+#define CORTEX_A9_SCU_SIZE 0x58
+
+#define SECONDARY_TIMEOUT_NS NSEC_PER_MSEC /* 1 msec (in nanoseconds) */
+#define BOOT_ADDR_CPUID_MASK 0x3
+
+/* Name of device node property defining secondary boot register location */
+#define OF_SECONDARY_BOOT "secondary-boot-reg"
+#define MPIDR_CPUID_BITMASK 0x3
+
+/* I/O address of register used to coordinate secondary core startup */
+static u32 secondary_boot_addr;
+
+/*
+ * Enable the Cortex A9 Snoop Control Unit
+ *
+ * By the time this is called we already know there are multiple
+ * cores present. We assume we're running on a Cortex A9 processor,
+ * so any trouble getting the base address register or getting the
+ * SCU base is a problem.
+ *
+ * Return 0 if successful or an error code otherwise.
+ */
+static int __init scu_a9_enable(void)
+{
+ unsigned long config_base;
+ void __iomem *scu_base;
+
+ if (!scu_a9_has_base()) {
+ pr_err("no configuration base address register!\n");
+ return -ENXIO;
+ }
+
+ /* Config base address register value is zero for uniprocessor */
+ config_base = scu_a9_get_base();
+ if (!config_base) {
+ pr_err("hardware reports only one core\n");
+ return -ENOENT;
+ }
+
+ scu_base = ioremap((phys_addr_t)config_base, CORTEX_A9_SCU_SIZE);
+ if (!scu_base) {
+ pr_err("failed to remap config base (%lu/%u) for SCU\n",
+ config_base, CORTEX_A9_SCU_SIZE);
+ return -ENOMEM;
+ }
+
+ scu_enable(scu_base);
+
+ iounmap(scu_base); /* That's the last we'll need of this */
+
+ return 0;
+}
+
+static int nsp_write_lut(void)
+{
+ void __iomem *sku_rom_lut;
+ phys_addr_t secondary_startup_phy;
+
+ if (!secondary_boot_addr) {
+ pr_warn("required secondary boot register not specified\n");
+ return -EINVAL;
+ }
+
+ sku_rom_lut = ioremap_nocache((phys_addr_t)secondary_boot_addr,
+ sizeof(secondary_boot_addr));
+ if (!sku_rom_lut) {
+ pr_warn("unable to ioremap SKU-ROM LUT register\n");
+ return -ENOMEM;
+ }
+
+ secondary_startup_phy = virt_to_phys(secondary_startup);
+ BUG_ON(secondary_startup_phy > (phys_addr_t)U32_MAX);
+
+ writel_relaxed(secondary_startup_phy, sku_rom_lut);
+
+ /* Ensure the write is visible to the secondary core */
+ smp_wmb();
+
+ iounmap(sku_rom_lut);
+
+ return 0;
+}
+
+static void __init bcm_smp_prepare_cpus(unsigned int max_cpus)
+{
+ static cpumask_t only_cpu_0 = { CPU_BITS_CPU0 };
+ struct device_node *cpus_node = NULL;
+ struct device_node *cpu_node = NULL;
+ int ret;
+
+ /*
+ * This function is only called via smp_ops->smp_prepare_cpu().
+ * That only happens if a "/cpus" device tree node exists
+ * and has an "enable-method" property that selects the SMP
+ * operations defined herein.
+ */
+ cpus_node = of_find_node_by_path("/cpus");
+ if (!cpus_node)
+ return;
+
+ for_each_child_of_node(cpus_node, cpu_node) {
+ u32 cpuid;
+
+ if (of_node_cmp(cpu_node->type, "cpu"))
+ continue;
+
+ if (of_property_read_u32(cpu_node, "reg", &cpuid)) {
+ pr_debug("%s: missing reg property\n",
+ cpu_node->full_name);
+ ret = -ENOENT;
+ goto out;
+ }
+
+ /*
+ * "secondary-boot-reg" property should be defined only
+ * for secondary cpu
+ */
+ if ((cpuid & MPIDR_CPUID_BITMASK) == 1) {
+ /*
+ * Our secondary enable method requires a
+ * "secondary-boot-reg" property to specify a register
+ * address used to request the ROM code boot a secondary
+ * core. If we have any trouble getting this we fall
+ * back to uniprocessor mode.
+ */
+ if (of_property_read_u32(cpu_node,
+ OF_SECONDARY_BOOT,
+ &secondary_boot_addr)) {
+ pr_warn("%s: no" OF_SECONDARY_BOOT "property\n",
+ cpu_node->name);
+ ret = -ENOENT;
+ goto out;
+ }
+ }
+ }
+
+ /*
+ * Enable the SCU on Cortex A9 based SoCs. If -ENOENT is
+ * returned, the SoC reported a uniprocessor configuration.
+ * We bail on any other error.
+ */
+ ret = scu_a9_enable();
+out:
+ of_node_put(cpu_node);
+ of_node_put(cpus_node);
+
+ if (ret) {
+ /* Update the CPU present map to reflect uniprocessor mode */
+ pr_warn("disabling SMP\n");
+ init_cpu_present(&only_cpu_0);
+ }
+}
+
+/*
+ * The ROM code has the secondary cores looping, waiting for an event.
+ * When an event occurs each core examines the bottom two bits of the
+ * secondary boot register. When a core finds those bits contain its
+ * own core id, it performs initialization, including computing its boot
+ * address by clearing the boot register value's bottom two bits. The
+ * core signals that it is beginning its execution by writing its boot
+ * address back to the secondary boot register, and finally jumps to
+ * that address.
+ *
+ * So to start a core executing we need to:
+ * - Encode the (hardware) CPU id with the bottom bits of the secondary
+ * start address.
+ * - Write that value into the secondary boot register.
+ * - Generate an event to wake up the secondary CPU(s).
+ * - Wait for the secondary boot register to be re-written, which
+ * indicates the secondary core has started.
+ */
+static int kona_boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+ void __iomem *boot_reg;
+ phys_addr_t boot_func;
+ u64 start_clock;
+ u32 cpu_id;
+ u32 boot_val;
+ bool timeout = false;
+
+ cpu_id = cpu_logical_map(cpu);
+ if (cpu_id & ~BOOT_ADDR_CPUID_MASK) {
+ pr_err("bad cpu id (%u > %u)\n", cpu_id, BOOT_ADDR_CPUID_MASK);
+ return -EINVAL;
+ }
+
+ if (!secondary_boot_addr) {
+ pr_err("required secondary boot register not specified\n");
+ return -EINVAL;
+ }
+
+ boot_reg = ioremap_nocache(
+ (phys_addr_t)secondary_boot_addr, sizeof(u32));
+ if (!boot_reg) {
+ pr_err("unable to map boot register for cpu %u\n", cpu_id);
+ return -ENOMEM;
+ }
+
+ /*
+ * Secondary cores will start in secondary_startup(),
+ * defined in "arch/arm/kernel/head.S"
+ */
+ boot_func = virt_to_phys(secondary_startup);
+ BUG_ON(boot_func & BOOT_ADDR_CPUID_MASK);
+ BUG_ON(boot_func > (phys_addr_t)U32_MAX);
+
+ /* The core to start is encoded in the low bits */
+ boot_val = (u32)boot_func | cpu_id;
+ writel_relaxed(boot_val, boot_reg);
+
+ sev();
+
+ /* The low bits will be cleared once the core has started */
+ start_clock = local_clock();
+ while (!timeout && readl_relaxed(boot_reg) == boot_val)
+ timeout = local_clock() - start_clock > SECONDARY_TIMEOUT_NS;
+
+ iounmap(boot_reg);
+
+ if (!timeout)
+ return 0;
+
+ pr_err("timeout waiting for cpu %u to start\n", cpu_id);
+
+ return -ENXIO;
+}
+
+static int nsp_boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+ int ret;
+
+ /*
+ * After wake up, secondary core branches to the startup
+ * address programmed at SKU ROM LUT location.
+ */
+ ret = nsp_write_lut();
+ if (ret) {
+ pr_err("unable to write startup addr to SKU ROM LUT\n");
+ goto out;
+ }
+
+ /* Send a CPU wakeup interrupt to the secondary core */
+ arch_send_wakeup_ipi_mask(cpumask_of(cpu));
+
+out:
+ return ret;
+}
+
+static struct smp_operations bcm_smp_ops __initdata = {
+ .smp_prepare_cpus = bcm_smp_prepare_cpus,
+ .smp_boot_secondary = kona_boot_secondary,
+};
+CPU_METHOD_OF_DECLARE(bcm_smp_bcm281xx, "brcm,bcm11351-cpu-method",
+ &bcm_smp_ops);
+
+struct smp_operations nsp_smp_ops __initdata = {
+ .smp_prepare_cpus = bcm_smp_prepare_cpus,
+ .smp_boot_secondary = nsp_boot_secondary,
+};
+CPU_METHOD_OF_DECLARE(bcm_smp_nsp, "brcm,bcm-nsp-smp", &nsp_smp_ops);

58
target/linux/bcm53xx/patches-4.4/024-ARM-BCM-Add-SMP-support-for-Broadcom-4708.patch
View File

@ -1,58 +0,0 @@
From 99498905ac1fbc73a97d27d21ea449fb939072e3 Mon Sep 17 00:00:00 2001
From: Jon Mason <jonmason@broadcom.com>
Date: Tue, 1 Dec 2015 11:24:09 -0500
Subject: [PATCH] ARM: BCM: Add SMP support for Broadcom 4708
Add SMP support for Broadcom's 4708 SoCs.
Signed-off-by: Jon Mason <jonmason@broadcom.com>
Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
Tested-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Kapil Hali <kapilh@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
arch/arm/boot/dts/bcm4708.dtsi | 2 ++
arch/arm/mach-bcm/Kconfig | 1 +
arch/arm/mach-bcm/Makefile | 3 +++
3 files changed, 6 insertions(+)
--- a/arch/arm/boot/dts/bcm4708.dtsi
+++ b/arch/arm/boot/dts/bcm4708.dtsi
@@ -15,6 +15,7 @@
cpus {
#address-cells = <1>;
#size-cells = <0>;
+ enable-method = "brcm,bcm-nsp-smp";
cpu@0 {
device_type = "cpu";
@@ -27,6 +28,7 @@
device_type = "cpu";
compatible = "arm,cortex-a9";
next-level-cache = <&L2>;
+ secondary-boot-reg = <0xffff0400>;
reg = <0x1>;
};
};
--- a/arch/arm/mach-bcm/Kconfig
+++ b/arch/arm/mach-bcm/Kconfig
@@ -57,6 +57,7 @@ config ARCH_BCM_5301X
select ARM_ERRATA_754322
select ARM_ERRATA_775420
select ARM_ERRATA_764369 if SMP
+ select HAVE_SMP
help
Support for Broadcom BCM470X and BCM5301X SoCs with ARM CPU cores.
--- a/arch/arm/mach-bcm/Makefile
+++ b/arch/arm/mach-bcm/Makefile
@@ -43,6 +43,9 @@ obj-$(CONFIG_ARCH_BCM2835) += board_bcm2
# BCM5301X
obj-$(CONFIG_ARCH_BCM_5301X) += bcm_5301x.o
+ifeq ($(CONFIG_ARCH_BCM_5301X),y)
+obj-$(CONFIG_SMP) += platsmp.o
+endif
# BCM63XXx
ifeq ($(CONFIG_ARCH_BCM_63XX),y)

219
target/linux/bcm53xx/patches-4.4/030-ARM-dts-bcm5301x-Add-BCM-SVK-DT-files.patch
View File

@ -1,219 +0,0 @@
From ccf0b5e37115f8675455632f583d06ea94f43539 Mon Sep 17 00:00:00 2001
From: Jon Mason <jonmason@broadcom.com>
Date: Mon, 2 Nov 2015 13:34:53 -0500
Subject: [PATCH] ARM: dts: bcm5301x: Add BCM SVK DT files
Add device tree files for Broadcom Northstar based SVKs. Since the
bcm5301x.dtsi already exists, all that is necessary is the dts files to
enable the UARTs. With these files, the SVKs are able to boot to shell.
Signed-off-by: Jon Mason <jonmason@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
arch/arm/boot/dts/Makefile | 5 +++-
arch/arm/boot/dts/bcm94708.dts | 56 +++++++++++++++++++++++++++++++++++
arch/arm/boot/dts/bcm94709.dts | 56 +++++++++++++++++++++++++++++++++++
arch/arm/boot/dts/bcm953012k.dts | 63 ++++++++++++++++++++++++++++++++++++++++
4 files changed, 179 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/boot/dts/bcm94708.dts
create mode 100644 arch/arm/boot/dts/bcm94709.dts
create mode 100644 arch/arm/boot/dts/bcm953012k.dts
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -75,7 +75,10 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
bcm4709-asus-rt-ac87u.dtb \
bcm4709-buffalo-wxr-1900dhp.dtb \
bcm4709-netgear-r7000.dtb \
- bcm4709-netgear-r8000.dtb
+ bcm4709-netgear-r8000.dtb \
+ bcm94708.dtb \
+ bcm94709.dtb \
+ bcm953012k.dtb
dtb-$(CONFIG_ARCH_BCM_63XX) += \
bcm963138dvt.dtb
dtb-$(CONFIG_ARCH_BCM_CYGNUS) += \
--- /dev/null
+++ b/arch/arm/boot/dts/bcm94708.dts
@@ -0,0 +1,56 @@
+/*
+ * BSD LICENSE
+ *
+ * Copyright(c) 2015 Broadcom Corporation. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Broadcom Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+
+/ {
+ model = "NorthStar SVK (BCM94708)";
+ compatible = "brcm,bcm94708", "brcm,bcm4708";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory {
+ reg = <0x00000000 0x08000000>;
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
--- /dev/null
+++ b/arch/arm/boot/dts/bcm94709.dts
@@ -0,0 +1,56 @@
+/*
+ * BSD LICENSE
+ *
+ * Copyright(c) 2015 Broadcom Corporation. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Broadcom Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+
+/ {
+ model = "NorthStar SVK (BCM94709)";
+ compatible = "brcm,bcm94709", "brcm,bcm4709", "brcm,bcm4708";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory {
+ reg = <0x00000000 0x08000000>;
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
--- /dev/null
+++ b/arch/arm/boot/dts/bcm953012k.dts
@@ -0,0 +1,63 @@
+/*
+ * BSD LICENSE
+ *
+ * Copyright(c) 2015 Broadcom Corporation. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Broadcom Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+
+/ {
+ model = "NorthStar SVK (BCM953012K)";
+ compatible = "brcm,bcm953012k", "brcm,brcm53012", "brcm,bcm4708";
+
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory {
+ reg = <0x00000000 0x10000000>;
+ };
+};
+
+&uart0 {
+ clock-frequency = <62499840>;
+ status = "okay";
+};
+
+&uart1 {
+ clock-frequency = <62499840>;
+ status = "okay";
+};

174
target/linux/bcm53xx/patches-4.4/031-ARM-dts-enable-clock-support-for-BCM5301X.patch
View File

@ -1,174 +0,0 @@
From cdc36b22f0e4b8badf3db14395f0aa44dcbce4b3 Mon Sep 17 00:00:00 2001
From: Jon Mason <jonmason@broadcom.com>
Date: Fri, 20 Nov 2015 10:17:18 -0500
Subject: [PATCH] ARM: dts: enable clock support for BCM5301X
Replace current device tree dummy clocks with real clock support for
Broadcom Northstar SoCs.
Signed-off-by: Jon Mason <jonmason@broadcom.com>
Reviewed-by: Ray Jui <rjui@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
arch/arm/boot/dts/bcm5301x.dtsi | 92 +++++++++++++++++++++++++++++++----------
1 file changed, 71 insertions(+), 21 deletions(-)
--- a/arch/arm/boot/dts/bcm5301x.dtsi
+++ b/arch/arm/boot/dts/bcm5301x.dtsi
@@ -8,6 +8,7 @@
* Licensed under the GNU/GPL. See COPYING for details.
*/
+#include <dt-bindings/clock/bcm-nsp.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/irq.h>
@@ -27,7 +28,7 @@
compatible = "ns16550";
reg = <0x0300 0x100>;
interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
- clock-frequency = <100000000>;
+ clocks = <&iprocslow>;
status = "disabled";
};
@@ -35,48 +36,55 @@
compatible = "ns16550";
reg = <0x0400 0x100>;
interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
- clock-frequency = <100000000>;
+ clocks = <&iprocslow>;
status = "disabled";
};
};
mpcore {
compatible = "simple-bus";
- ranges = <0x00000000 0x19020000 0x00003000>;
+ ranges = <0x00000000 0x19000000 0x00023000>;
#address-cells = <1>;
#size-cells = <1>;
- scu@0000 {
+ a9pll: arm_clk@00000 {
+ #clock-cells = <0>;
+ compatible = "brcm,nsp-armpll";
+ clocks = <&osc>;
+ reg = <0x00000 0x1000>;
+ };
+
+ scu@20000 {
compatible = "arm,cortex-a9-scu";
- reg = <0x0000 0x100>;
+ reg = <0x20000 0x100>;
};
- timer@0200 {
+ timer@20200 {
compatible = "arm,cortex-a9-global-timer";
- reg = <0x0200 0x100>;
+ reg = <0x20200 0x100>;
interrupts = <GIC_PPI 11 IRQ_TYPE_EDGE_RISING>;
- clocks = <&clk_periph>;
+ clocks = <&periph_clk>;
};
- local-timer@0600 {
+ local-timer@20600 {
compatible = "arm,cortex-a9-twd-timer";
- reg = <0x0600 0x100>;
+ reg = <0x20600 0x100>;
interrupts = <GIC_PPI 13 IRQ_TYPE_EDGE_RISING>;
- clocks = <&clk_periph>;
+ clocks = <&periph_clk>;
};
- gic: interrupt-controller@1000 {
+ gic: interrupt-controller@21000 {
compatible = "arm,cortex-a9-gic";
#interrupt-cells = <3>;
#address-cells = <0>;
interrupt-controller;
- reg = <0x1000 0x1000>,
- <0x0100 0x100>;
+ reg = <0x21000 0x1000>,
+ <0x20100 0x100>;
};
- L2: cache-controller@2000 {
+ L2: cache-controller@22000 {
compatible = "arm,pl310-cache";
- reg = <0x2000 0x1000>;
+ reg = <0x22000 0x1000>;
cache-unified;
arm,shared-override;
prefetch-data = <1>;
@@ -94,14 +102,37 @@
clocks {
#address-cells = <1>;
- #size-cells = <0>;
+ #size-cells = <1>;
+ ranges;
- /* As long as we do not have a real clock driver us this
- * fixed clock */
- clk_periph: periph {
+ osc: oscillator {
+ #clock-cells = <0>;
compatible = "fixed-clock";
+ clock-frequency = <25000000>;
+ };
+
+ iprocmed: iprocmed {
#clock-cells = <0>;
- clock-frequency = <400000000>;
+ compatible = "fixed-factor-clock";
+ clocks = <&genpll BCM_NSP_GENPLL_IPROCFAST_CLK>;
+ clock-div = <2>;
+ clock-mult = <1>;
+ };
+
+ iprocslow: iprocslow {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&genpll BCM_NSP_GENPLL_IPROCFAST_CLK>;
+ clock-div = <4>;
+ clock-mult = <1>;
+ };
+
+ periph_clk: periph_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&a9pll>;
+ clock-div = <2>;
+ clock-mult = <1>;
};
};
@@ -178,6 +209,25 @@
};
};
+ lcpll0: lcpll0@1800c100 {
+ #clock-cells = <1>;
+ compatible = "brcm,nsp-lcpll0";
+ reg = <0x1800c100 0x14>;
+ clocks = <&osc>;
+ clock-output-names = "lcpll0", "pcie_phy", "sdio",
+ "ddr_phy";
+ };
+
+ genpll: genpll@1800c140 {
+ #clock-cells = <1>;
+ compatible = "brcm,nsp-genpll";
+ reg = <0x1800c140 0x24>;
+ clocks = <&osc>;
+ clock-output-names = "genpll", "phy", "ethernetclk",
+ "usbclk", "iprocfast", "sata1",
+ "sata2";
+ };
+
nand: nand@18028000 {
compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1", "brcm,brcmnand";
reg = <0x18028000 0x600>, <0x1811a408 0x600>, <0x18028f00 0x20>;

56
target/linux/bcm53xx/patches-4.4/032-ARM-BCM5301X-Add-missing-Netgear-R8000-LEDs.patch
View File

@ -1,56 +0,0 @@
From 9789f1fd1fd1d0551132778414faf8e2254408c1 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
Date: Fri, 30 Oct 2015 15:44:01 +0100
Subject: [PATCH] ARM: BCM5301X: Add missing Netgear R8000 LEDs
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Add a bunch of LEDs missing for the Netgear R8000: wireless, wps, 5Ghz radio
and USB LEDs.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
arch/arm/boot/dts/bcm4709-netgear-r8000.dts | 30 +++++++++++++++++++++++++++++
1 file changed, 30 insertions(+)
--- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
+++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
@@ -50,6 +50,36 @@
gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
linux,default-trigger = "default-off";
};
+
+ wireless {
+ label = "bcm53xx:white:wireless";
+ gpios = <&chipcommon 14 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "default-off";
+ };
+
+ wps {
+ label = "bcm53xx:white:wps";
+ gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "default-off";
+ };
+
+ 5ghz-2 {
+ label = "bcm53xx:white:5ghz-2";
+ gpios = <&chipcommon 16 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "default-off";
+ };
+
+ usb3 {
+ label = "bcm53xx:white:usb3";
+ gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "default-off";
+ };
+
+ usb2 {
+ label = "bcm53xx:white:usb2";
+ gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "default-off";
+ };
};
gpio-keys {

70
target/linux/bcm53xx/patches-4.4/033-dt-bindings-add-SMP-enable-method-for-Broadcom-NSP.patch
View File

@ -1,70 +0,0 @@
From fa20071c74be69a1d84df85e5d1e72a40a156b89 Mon Sep 17 00:00:00 2001
From: Kapil Hali <kapilh@broadcom.com>
Date: Tue, 1 Dec 2015 11:24:05 -0500
Subject: [PATCH] dt-bindings: add SMP enable-method for Broadcom NSP
Add a compatible string "brcm,bcm-nsp-smp" for Broadcom's
Northstar Plus CPU to the 32-bit ARM CPU device tree binding
documentation file and create a new binding documentation for
Northstar Plus CPU.
Signed-off-by: Kapil Hali <kapilh@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
.../bindings/arm/bcm/brcm,nsp-cpu-method.txt | 39 ++++++++++++++++++++++
Documentation/devicetree/bindings/arm/cpus.txt | 1 +
2 files changed, 40 insertions(+)
create mode 100644 Documentation/devicetree/bindings/arm/bcm/brcm,nsp-cpu-method.txt
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,nsp-cpu-method.txt
@@ -0,0 +1,39 @@
+Broadcom Northstar Plus SoC CPU Enable Method
+---------------------------------------------
+This binding defines the enable method used for starting secondary
+CPUs in the following Broadcom SoCs:
+ BCM58522, BCM58525, BCM58535, BCM58622, BCM58623, BCM58625, BCM88312
+
+The enable method is specified by defining the following required
+properties in the "cpus" device tree node:
+ - enable-method = "brcm,bcm-nsp-smp";
+ - secondary-boot-reg = <...>;
+
+The secondary-boot-reg property is a u32 value that specifies the
+physical address of the register which should hold the common
+entry point for a secondary CPU. This entry is cpu node specific
+and should be added per cpu. E.g., in case of NSP (BCM58625) which
+is a dual core CPU SoC, this entry should be added to cpu1 node.
+
+
+Example:
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ enable-method = "brcm,bcm-nsp-smp";
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ next-level-cache = <&L2>;
+ reg = <0>;
+ };
+
+ cpu1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ next-level-cache = <&L2>;
+ reg = <1>;
+ secondary-boot-reg = <0xffff042c>;
+ };
+ };
--- a/Documentation/devicetree/bindings/arm/cpus.txt
+++ b/Documentation/devicetree/bindings/arm/cpus.txt
@@ -190,6 +190,7 @@ nodes to be present and contain the prop
"allwinner,sun6i-a31"
"allwinner,sun8i-a23"
"arm,psci"
+ "brcm,bcm-nsp-smp"
"brcm,brahma-b15"
"marvell,armada-375-smp"
"marvell,armada-380-smp"

141
target/linux/bcm53xx/patches-4.4/034-ARM-BCM5301X-Add-DT-for-D-Link-DIR-885L.patch
View File

@ -1,141 +0,0 @@
From 3ea03a9d512ca19d59315492230e954a1653ff6e Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
Date: Tue, 26 Jan 2016 23:35:16 +0100
Subject: [PATCH] ARM: BCM5301X: Add DT for D-Link DIR-885L
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
It's device based on BCM47094 which is quite similar to BCM4709 except
for higher CPU frequency. This device has 2 flash memories, it boots
from serial one and stores firmware on NAND. Other than that we define
standard stuff like LEDs, buttons and UART.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -76,6 +76,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
bcm4709-buffalo-wxr-1900dhp.dtb \
bcm4709-netgear-r7000.dtb \
bcm4709-netgear-r8000.dtb \
+ bcm47094-dlink-dir-885l.dtb \
bcm94708.dtb \
bcm94709.dtb \
bcm953012k.dtb
--- /dev/null
+++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
@@ -0,0 +1,111 @@
+/*
+ * Broadcom BCM470X / BCM5301X ARM platform code.
+ * DTS for D-Link DIR-885L
+ *
+ * Copyright (C) 2016 Rafał Miłecki <zajec5@gmail.com>
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
+ compatible = "dlink,dir-885l", "brcm,bcm47094", "brcm,bcm4708";
+ model = "D-Link DIR-885L";
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ memory {
+ reg = <0x00000000 0x08000000>;
+ };
+
+ nand: nand@18028000 {
+ nandcs@0 {
+ partition@0 {
+ label = "firmware";
+ reg = <0x00000000 0x08000000>;
+ };
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ power-white {
+ label = "bcm53xx:white:power";
+ gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "default-on";
+ };
+
+ wan-white {
+ label = "bcm53xx:white:wan";
+ gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "default-off";
+ };
+
+ power-amber {
+ label = "bcm53xx:amber:power";
+ gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "default-off";
+ };
+
+ wan-amber {
+ label = "bcm53xx:amber:wan";
+ gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "default-off";
+ };
+
+ usb3-white {
+ label = "bcm53xx:white:usb3";
+ gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "default-off";
+ };
+
+ 2ghz {
+ label = "bcm53xx:white:2ghz";
+ gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "default-off";
+ };
+
+ 5ghz {
+ label = "bcm53xx:white:5ghz";
+ gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "default-off";
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ wps {
+ label = "WPS";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
+ };
+
+ /* Switch: router / extender */
+ extender {
+ label = "Extender";
+ linux,code = <BTN_0>;
+ gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
+ };
+
+ restart {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&uart0 {
+ status = "okay";
+ clock-frequency = <125000000>;
+};

117
target/linux/bcm53xx/patches-4.4/035-ARM-BCM5301X-Set-vcc-gpio-for-USB-controllers-of-few.patch
View File

@ -1,117 +0,0 @@
From dd70ccfaa79189feaa78609d44f7c3e7fa1dc6ff Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
Date: Wed, 23 Mar 2016 16:52:47 +0100
Subject: [PATCH] ARM: BCM5301X: Set vcc-gpio for USB controllers of few
devices
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
There are few devices that have USB power controlled using GPIO. Linux
USB host driver (bcma-hcd) already supports this by reading vcc-gpio
from DT. Set it properly for all known devices.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
--- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
+++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
@@ -139,3 +139,11 @@
&uart0 {
status = "okay";
};
+
+&usb2 {
+ vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
+};
+
+&usb3 {
+ vcc-gpio = <&chipcommon 10 GPIO_ACTIVE_LOW>;
+};
--- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
+++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
@@ -24,17 +24,6 @@
reg = <0x00000000 0x08000000>;
};
- axi@18000000 {
- usb3@23000 {
- reg = <0x00023000 0x1000>;
-
- #address-cells = <1>;
- #size-cells = <1>;
-
- vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
- };
- };
-
leds {
compatible = "gpio-leds";
@@ -97,3 +86,7 @@
&uart0 {
status = "okay";
};
+
+&usb3 {
+ vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
+};
--- a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
+++ b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
@@ -126,3 +126,8 @@
};
};
};
+
+
+&usb2 {
+ vcc-gpio = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
+};
--- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
+++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
@@ -106,3 +106,11 @@
};
};
};
+
+&usb2 {
+ vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
+};
+
+&usb3 {
+ vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
+};
--- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
+++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
@@ -109,3 +109,7 @@
status = "okay";
clock-frequency = <125000000>;
};
+
+&usb3 {
+ vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
+};
--- a/arch/arm/boot/dts/bcm5301x.dtsi
+++ b/arch/arm/boot/dts/bcm5301x.dtsi
@@ -207,6 +207,20 @@
gpio-controller;
#gpio-cells = <2>;
};
+
+ usb2: usb2@21000 {
+ reg = <0x00021000 0x1000>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+
+ usb3: usb3@23000 {
+ reg = <0x00023000 0x1000>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
};
lcpll0: lcpll0@1800c100 {

95
target/linux/bcm53xx/patches-4.4/036-ARM-BCM5301X-Enable-earlycon-on-tested-devices.patch
View File

@ -1,95 +0,0 @@
From 5a6516ff135555aa53c7d156cd3973b826e011f9 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
Date: Wed, 6 Apr 2016 18:49:55 +0200
Subject: [PATCH] ARM: BCM5301X: Enable earlycon on tested devices
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
This allows reporting & debugging problems occurring early in the boot
process.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
--- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
+++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
@@ -17,7 +17,7 @@
model = "Buffalo WZR-1750DHP (BCM4708)";
chosen {
- bootargs = "console=ttyS0,115200";
+ bootargs = "console=ttyS0,115200 earlycon";
};
memory {
--- a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
+++ b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
@@ -17,7 +17,7 @@
model = "Luxul XWC-1000 (BCM4708)";
chosen {
- bootargs = "console=ttyS0,115200";
+ bootargs = "console=ttyS0,115200 earlycon";
};
memory {
--- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
+++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
@@ -17,7 +17,7 @@
model = "Netgear R6250 V1 (BCM4708)";
chosen {
- bootargs = "console=ttyS0,115200";
+ bootargs = "console=ttyS0,115200 earlycon";
};
memory {
--- a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
+++ b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
@@ -17,7 +17,7 @@
model = "SmartRG SR400ac";
chosen {
- bootargs = "console=ttyS0,115200";
+ bootargs = "console=ttyS0,115200 earlycon";
};
memory {
--- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
+++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
@@ -17,7 +17,7 @@
model = "Buffalo WZR-600DHP2 (BCM47081)";
chosen {
- bootargs = "console=ttyS0,115200";
+ bootargs = "console=ttyS0,115200 earlycon";
};
memory {
--- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
+++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
@@ -17,7 +17,7 @@
model = "D-Link DIR-885L";
chosen {
- bootargs = "console=ttyS0,115200";
+ bootargs = "console=ttyS0,115200 earlycon";
};
memory {
--- a/arch/arm/boot/dts/bcm5301x.dtsi
+++ b/arch/arm/boot/dts/bcm5301x.dtsi
@@ -18,6 +18,10 @@
/ {
interrupt-parent = <&gic>;
+ chosen {
+ stdout-path = &uart0;
+ };
+
chipcommonA {
compatible = "simple-bus";
ranges = <0x00000000 0x18000000 0x00001000>;

58
target/linux/bcm53xx/patches-4.4/037-0001-ARM-BCM5301X-Add-DT-entry-for-SPI-controller-and-NOR.patch
View File

@ -1,58 +0,0 @@
From 1b47b98acce2db0da632d056821420b33205b8b2 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
Date: Tue, 19 Apr 2016 08:56:46 +0200
Subject: [PATCH] ARM: BCM5301X: Add DT entry for SPI controller and NOR flash
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Controller is present on every BCM4708* board but only few devices have
serial flash attached so mark it as disabled by default.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
--- a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
+++ b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
@@ -59,3 +59,7 @@
&uart0 {
status = "okay";
};
+
+&spi_nor {
+ status = "okay";
+};
--- a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
+++ b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
@@ -122,3 +122,7 @@
&uart0 {
status = "okay";
};
+
+&spi_nor {
+ status = "okay";
+};
--- a/arch/arm/boot/dts/bcm5301x.dtsi
+++ b/arch/arm/boot/dts/bcm5301x.dtsi
@@ -225,6 +225,20 @@
#address-cells = <1>;
#size-cells = <1>;
};
+
+ spi@29000 {
+ reg = <0x00029000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ spi_nor: spi-nor@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <20000000>;
+ linux,part-probe = "ofpart", "bcm47xxpart";
+ status = "disabled";
+ };
+ };
};
lcpll0: lcpll0@1800c100 {

75
target/linux/bcm53xx/patches-4.4/037-0002-ARM-BCM5301X-Enable-SPI-NOR-on-dual-flash-devices.patch
View File

@ -1,75 +0,0 @@
From 5f79985dcfec73d7a09ed99c40c28b64552518fe Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
Date: Wed, 27 Apr 2016 09:05:03 +0200
Subject: [PATCH] ARM: BCM5301X: Enable SPI-NOR on dual flash devices
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Commit 1b47b98acce2 ("ARM: BCM5301X: Add DT entry for SPI controller and
NOR flash") enabled SPI-NOR device on routers using serial flash only.
However there are also devices with two flash memories:
1) Small SPI attached flash used mostly for booting
2) Bigger NAND used mostly for storing firmware
On such devices we still need SPI-NOR e.g. to access NVRAM data.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts | 4 ++++
arch/arm/boot/dts/bcm4708-netgear-r6250.dts | 4 ++++
arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts | 4 ++++
arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts | 4 ++++
arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts | 4 ++++
5 files changed, 20 insertions(+)
--- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
+++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
@@ -147,3 +147,7 @@
&usb3 {
vcc-gpio = <&chipcommon 10 GPIO_ACTIVE_LOW>;
};
+
+&spi_nor {
+ status = "okay";
+};
--- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
+++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
@@ -90,3 +90,7 @@
&usb3 {
vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
};
+
+&spi_nor {
+ status = "okay";
+};
--- a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
+++ b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
@@ -82,3 +82,7 @@
};
};
};
+
+&spi_nor {
+ status = "okay";
+};
--- a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
+++ b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
@@ -131,3 +131,7 @@
&usb2 {
vcc-gpio = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
};
+
+&spi_nor {
+ status = "okay";
+};
--- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
+++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
@@ -113,3 +113,7 @@
&usb3 {
vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
};
+
+&spi_nor {
+ status = "okay";
+};

63
target/linux/bcm53xx/patches-4.4/038-0001-ARM-dts-Enable-SRAB-switch-and-GMACs-on-5301x-DTS.patch
View File

@ -1,63 +0,0 @@
From 59f0ce1a3ebb9288fc8c1400aa503e923621161e Mon Sep 17 00:00:00 2001
From: Florian Fainelli <f.fainelli@gmail.com>
Date: Mon, 23 May 2016 16:38:00 -0700
Subject: [PATCH 1/3] ARM: dts: Enable SRAB switch and GMACs on 5301x DTS
Add the Switch Register Access Block which is a special piece of
hardware allowing us to perform indirect read/writes towards the
integrated BCM5301X Ethernet switch.
We also add the 4 Gigabit MAC Device Tree nodes within the brcm,bus-axi
bus node to get proper binding between the BCMA instantiated core and
the Device Tree nodes. We will need that to be able to reference
Ethernet Device Tree nodes in a future patch adding the switch ports
layout.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
arch/arm/boot/dts/bcm5301x.dtsi | 27 +++++++++++++++++++++++++++
1 file changed, 27 insertions(+)
--- a/arch/arm/boot/dts/bcm5301x.dtsi
+++ b/arch/arm/boot/dts/bcm5301x.dtsi
@@ -239,6 +239,22 @@
status = "disabled";
};
};
+
+ gmac0: ethernet@24000 {
+ reg = <0x24000 0x800>;
+ };
+
+ gmac1: ethernet@25000 {
+ reg = <0x25000 0x800>;
+ };
+
+ gmac2: ethernet@26000 {
+ reg = <0x26000 0x800>;
+ };
+
+ gmac3: ethernet@27000 {
+ reg = <0x27000 0x800>;
+ };
};
lcpll0: lcpll0@1800c100 {
@@ -260,6 +276,17 @@
"sata2";
};
+ srab: srab@18007000 {
+ compatible = "brcm,bcm5301x-srab";
+ reg = <0x18007000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+
+ /* ports are defined in board DTS */
+ };
+
nand: nand@18028000 {
compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1", "brcm,brcmnand";
reg = <0x18028000 0x600>, <0x1811a408 0x600>, <0x18028f00 0x20>;

38
target/linux/bcm53xx/patches-4.4/038-0002-ARM-dts-BCM5301X-Add-SRAB-interrupts.patch
View File

@ -1,38 +0,0 @@
From 2cd0c0202f138fa95b3fbb027e87b191ad0b1884 Mon Sep 17 00:00:00 2001
From: Florian Fainelli <f.fainelli@gmail.com>
Date: Tue, 24 May 2016 11:41:58 -0700
Subject: [PATCH 2/3] ARM: dts: BCM5301X: Add SRAB interrupts
Add interrupt mapping for the Switch Register Access Block. Only 12
interrupts are usable at the moment even though up to 32 are dedicated
to the SRAB.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
arch/arm/boot/dts/bcm5301x.dtsi | 15 +++++++++++++++
1 file changed, 15 insertions(+)
--- a/arch/arm/boot/dts/bcm5301x.dtsi
+++ b/arch/arm/boot/dts/bcm5301x.dtsi
@@ -153,6 +153,21 @@
/* ChipCommon */
<0x00000000 0 &gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+ /* Switch Register Access Block */
+ <0x00007000 0 &gic GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
+ <0x00007000 1 &gic GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+ <0x00007000 2 &gic GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+ <0x00007000 3 &gic GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+ <0x00007000 4 &gic GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+ <0x00007000 5 &gic GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+ <0x00007000 6 &gic GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+ <0x00007000 7 &gic GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+ <0x00007000 8 &gic GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+ <0x00007000 9 &gic GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+ <0x00007000 10 &gic GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+ <0x00007000 11 &gic GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+ <0x00007000 12 &gic GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+
/* PCIe Controller 0 */
<0x00012000 0 &gic GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
<0x00012000 1 &gic GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,

60
target/linux/bcm53xx/patches-4.4/038-0003-ARM-dts-BCM5310x-Enable-switch-ports-on-SmartRG-SR40.patch
View File

@ -1,60 +0,0 @@
From 2df1808dc0e2b5358e13beb95192b15200017776 Mon Sep 17 00:00:00 2001
From: Florian Fainelli <f.fainelli@gmail.com>
Date: Wed, 25 May 2016 16:55:35 -0700
Subject: [PATCH 3/3] ARM: dts: BCM5310x: Enable switch ports on SmartRG
SR400AC
Define the port mapping for the SmartRG SR400ACE device.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts | 40 +++++++++++++++++++++++++++
1 file changed, 40 insertions(+)
--- a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
+++ b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
@@ -126,3 +126,43 @@
&spi_nor {
status = "okay";
};
+
+&srab {
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ label = "lan4";
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "lan3";
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "lan2";
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "lan1";
+ };
+
+ port@4 {
+ reg = <4>;
+ label = "wan";
+ };
+
+ port@5 {
+ reg = <5>;
+ label = "cpu";
+ ethernet = <&gmac0>;
+ };
+ };
+};

27
target/linux/bcm53xx/patches-4.4/039-ARM-dts-BCM5301x-Add-RNG-Device-Tree-node.patch
View File

@ -1,27 +0,0 @@
From 36e55669ebdef9eaf3f4ab4e82a07bb4b95a4813 Mon Sep 17 00:00:00 2001
From: Florian Fainelli <f.fainelli@gmail.com>
Date: Wed, 22 Jun 2016 17:27:03 -0700
Subject: [PATCH] ARM: dts: BCM5301x: Add RNG Device Tree node
Add the DT node for the random number generator peripheral.
Acked-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
arch/arm/boot/dts/bcm5301x.dtsi | 5 +++++
1 file changed, 5 insertions(+)
--- a/arch/arm/boot/dts/bcm5301x.dtsi
+++ b/arch/arm/boot/dts/bcm5301x.dtsi
@@ -302,6 +302,11 @@
/* ports are defined in board DTS */
};
+ rng: rng@18004000 {
+ compatible = "brcm,bcm5301x-rng";
+ reg = <0x18004000 0x14>;
+ };
+
nand: nand@18028000 {
compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1", "brcm,brcmnand";
reg = <0x18028000 0x600>, <0x1811a408 0x600>, <0x18028f00 0x20>;

139
target/linux/bcm53xx/patches-4.4/040-ARM-dts-BCM5301x-Add-BCM953012ER-board.patch
View File

@ -1,139 +0,0 @@
From f8c331bda6a90b239f600020eec1b0defe7249b5 Mon Sep 17 00:00:00 2001
From: Florian Fainelli <f.fainelli@gmail.com>
Date: Wed, 22 Jun 2016 17:00:35 -0700
Subject: [PATCH] ARM: dts: BCM5301x: Add BCM953012ER board
Add support for the Broadcom BCM953012 Enterprise Router reference
board, enable the following peripherals:
- UART0 (UART1 is not populated)
- WPS and restart GPIO buttons
- Ethernet switch w/ only two facing ports
- NAND flash
- SPI-NOR flash
Acked-by: Jon Mason <jon.mason@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/bcm953012er.dts | 104 ++++++++++++++++++++++++++++++++++++++
2 files changed, 105 insertions(+)
create mode 100644 arch/arm/boot/dts/bcm953012er.dts
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -79,6 +79,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
bcm47094-dlink-dir-885l.dtb \
bcm94708.dtb \
bcm94709.dtb \
+ bcm953012er.dtb \
bcm953012k.dtb
dtb-$(CONFIG_ARCH_BCM_63XX) += \
bcm963138dvt.dtb
--- /dev/null
+++ b/arch/arm/boot/dts/bcm953012er.dts
@@ -0,0 +1,104 @@
+/*
+ * BSD LICENSE
+ *
+ * Copyright(c) 2016 Broadcom. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Broadcom Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
+ model = "NorthStar Enterprise Router (BCM953012ER)";
+ compatible = "brcm,bcm953012er", "brcm,brcm53012", "brcm,bcm4708";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory {
+ reg = <0x00000000 0x8000000>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ wps {
+ label = "WPS";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
+ };
+
+ restart {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&spi_nor {
+ status = "okay";
+};
+
+&srab {
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ label = "port0";
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "port1";
+ };
+
+ port@5 {
+ reg = <5>;
+ label = "cpu";
+ ethernet = <&gmac0>;
+ };
+ };
+};

65
target/linux/bcm53xx/patches-4.4/041-0001-ARM-BCM5301X-Specify-NAND-chip-select-and-ECC-in-sep.patch
View File

@ -1,65 +0,0 @@
From 8ab5f1fbd39c29125403678a0caf0a71046da361 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
Date: Mon, 6 Jun 2016 09:43:49 +0200
Subject: [PATCH 1/2] ARM: BCM5301X: Specify NAND chip select and ECC in
separated files
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Using separated file with common chip select parameters will allow us
adding other ECC setups without code duplication.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
arch/arm/boot/dts/bcm5301x-nand-cs0-bch8.dtsi | 16 +++++-----------
arch/arm/boot/dts/bcm5301x-nand-cs0.dtsi | 18 ++++++++++++++++++
2 files changed, 23 insertions(+), 11 deletions(-)
create mode 100644 arch/arm/boot/dts/bcm5301x-nand-cs0.dtsi
--- a/arch/arm/boot/dts/bcm5301x-nand-cs0-bch8.dtsi
+++ b/arch/arm/boot/dts/bcm5301x-nand-cs0-bch8.dtsi
@@ -9,16 +9,10 @@
* Licensed under the GNU/GPL. See COPYING for details.
*/
-/ {
- nand@18028000 {
- nandcs@0 {
- compatible = "brcm,nandcs";
- reg = <0>;
- #address-cells = <1>;
- #size-cells = <1>;
+#include "bcm5301x-nand-cs0.dtsi"
- nand-ecc-strength = <8>;
- nand-ecc-step-size = <512>;
- };
- };
+&nandcs {
+ nand-ecc-algo = "bch";
+ nand-ecc-strength = <8>;
+ nand-ecc-step-size = <512>;
};
--- /dev/null
+++ b/arch/arm/boot/dts/bcm5301x-nand-cs0.dtsi
@@ -0,0 +1,18 @@
+/*
+ * Broadcom Northstar NAND.
+ *
+ * Copyright (C) 2015 Hauke Mehrtens <hauke@hauke-m.de>
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+/ {
+ nand@18028000 {
+ nandcs: nandcs@0 {
+ compatible = "brcm,nandcs";
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+ };
+};

49
target/linux/bcm53xx/patches-4.4/041-0002-ARM-BCM5301X-Fix-NAND-ECC-parameters-for-D-Link-DIR-.patch
View File

@ -1,49 +0,0 @@
From 70a0ae1c33572f012b734d4b574f38136c57f1a0 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
Date: Mon, 6 Jun 2016 09:43:50 +0200
Subject: [PATCH 2/2] ARM: BCM5301X: Fix NAND ECC parameters for D-Link
DIR-885L
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
This device uses BCH-1 instead of BCH-8. This fixes ECC errors and makes
NAND usable with brcmnand.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts | 2 +-
arch/arm/boot/dts/bcm5301x-nand-cs0-bch1.dtsi | 15 +++++++++++++++
2 files changed, 16 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/boot/dts/bcm5301x-nand-cs0-bch1.dtsi
--- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
+++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
@@ -10,7 +10,7 @@
/dts-v1/;
#include "bcm4708.dtsi"
-#include "bcm5301x-nand-cs0-bch8.dtsi"
+#include "bcm5301x-nand-cs0-bch1.dtsi"
/ {
compatible = "dlink,dir-885l", "brcm,bcm47094", "brcm,bcm4708";
--- /dev/null
+++ b/arch/arm/boot/dts/bcm5301x-nand-cs0-bch1.dtsi
@@ -0,0 +1,15 @@
+/*
+ * Broadcom Northstar NAND.
+ *
+ * Copyright (C) 2016 Rafał Miłecki <rafal.milecki@gmail.com>
+ *
+ * Licensed under the ISC license.
+ */
+
+#include "bcm5301x-nand-cs0.dtsi"
+
+&nandcs {
+ nand-ecc-algo = "bch";
+ nand-ecc-strength = <1>;
+ nand-ecc-step-size = <512>;
+};

46
target/linux/bcm53xx/patches-4.4/042-ARM-BCM5301X-Specify-PHY-of-USB-2.0-in-DT.patch
View File

@ -1,46 +0,0 @@
From 773880f77ae0a6782dd3da176bd25d85ff3a8c7f Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
Date: Wed, 1 Jun 2016 22:07:07 +0200
Subject: [PATCH] ARM: BCM5301X: Specify PHY of USB 2.0 in DT
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Driver for Northstar USB 2.0 PHY was added in 4.7-rc1 by:
commit d3feb4067335 ("phy: bcm-ns-usb2: new driver for USB 2.0 PHY on
Northstar").
It should be used to let EHCI platform driver init PHY.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
arch/arm/boot/dts/bcm5301x.dtsi | 11 +++++++++++
1 file changed, 11 insertions(+)
--- a/arch/arm/boot/dts/bcm5301x.dtsi
+++ b/arch/arm/boot/dts/bcm5301x.dtsi
@@ -140,6 +140,15 @@
};
};
+ usb2_phy: usb2-phy {
+ compatible = "brcm,ns-usb2-phy";
+ reg = <0x1800c000 0x1000>;
+ reg-names = "dmu";
+ #phy-cells = <0>;
+ clocks = <&genpll BCM_NSP_GENPLL_USB_PHY_REF_CLK>;
+ clock-names = "phy-ref-clk";
+ };
+
axi@18000000 {
compatible = "brcm,bus-axi";
reg = <0x18000000 0x1000>;
@@ -232,6 +241,8 @@
#address-cells = <1>;
#size-cells = <1>;
+
+ phys = <&usb2_phy>;
};
usb3: usb3@23000 {

61
target/linux/bcm53xx/patches-4.4/043-0001-ARM-BCM53573-Initial-support-for-Broadcom-BCM53573-S.patch
View File

@ -1,61 +0,0 @@
From 4ebd50472899eb07d5dfc24f2015dce6fe3c5cb8 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
Date: Sun, 21 Aug 2016 19:01:38 +0200
Subject: [PATCH] ARM: BCM53573: Initial support for Broadcom BCM53573 SoCs
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
BCM53573 series is a new family with embedded wireless. By marketing
people it's sometimes called Northstar but it uses different CPU and has
different architecture so we need a new symbol for it.
Fortunately it shares some peripherals with other iProc based SoCs so we
will be able to reuse some drivers/bindings.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: Jon Mason <jon.mason@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
MAINTAINERS | 7 +++++++
arch/arm/mach-bcm/Kconfig | 14 ++++++++++++++
2 files changed, 21 insertions(+)
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2338,6 +2338,13 @@ F: arch/arm/mach-bcm/bcm_5301x.c
F: arch/arm/boot/dts/bcm5301x.dtsi
F: arch/arm/boot/dts/bcm470*
+BROADCOM BCM53573 ARM ARCHITECTURE
+M: Rafał Miłecki <rafal@milecki.pl>
+L: linux-arm-kernel@lists.infradead.org
+S: Maintained
+F: arch/arm/boot/dts/bcm53573*
+F: arch/arm/boot/dts/bcm47189*
+
BROADCOM BCM63XX ARM ARCHITECTURE
M: Florian Fainelli <f.fainelli@gmail.com>
L: linux-arm-kernel@lists.infradead.org
--- a/arch/arm/mach-bcm/Kconfig
+++ b/arch/arm/mach-bcm/Kconfig
@@ -141,6 +141,20 @@ config ARCH_BCM2835
This enables support for the Broadcom BCM2835 SoC. This SoC is
used in the Raspberry Pi and Roku 2 devices.
+config ARCH_BCM_53573
+ bool "Broadcom BCM53573 SoC series support"
+ depends on ARCH_MULTI_V7
+ select ARCH_BCM_IPROC
+ select HAVE_ARM_ARCH_TIMER
+ help
+ BCM53573 series is set of SoCs using ARM Cortex-A7 CPUs with wireless
+ embedded in the chipset.
+ This SoC line is mostly used in home routers and is some cheaper
+ alternative for Northstar family.
+
+ The base chip is BCM53573 and there are some packaging modifications
+ like BCM47189 and BCM47452.
+
config ARCH_BCM_63XX
bool "Broadcom BCM63xx DSL SoC" if ARCH_MULTI_V7
depends on MMU

136
target/linux/bcm53xx/patches-4.4/044-0001-ARM-BCM5301X-Add-DT-for-Netgear-R8500.patch
View File

@ -1,136 +0,0 @@
From b5057e498da8211ac3cc8ff5780034e5da61d077 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
Date: Tue, 23 Aug 2016 08:40:32 +0200
Subject: [PATCH] ARM: BCM5301X: Add DT for Netgear R8500
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Netgear R8500 is another BCM47094 device, it just has three BCM4366
wireless chipsets. It's a very standard DT with mostly GPIO devices.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/bcm47094-netgear-r8500.dts | 104 +++++++++++++++++++++++++++
2 files changed, 105 insertions(+)
create mode 100644 arch/arm/boot/dts/bcm47094-netgear-r8500.dts
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -77,6 +77,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
bcm4709-netgear-r7000.dtb \
bcm4709-netgear-r8000.dtb \
bcm47094-dlink-dir-885l.dtb \
+ bcm47094-netgear-r8500.dtb \
bcm94708.dtb \
bcm94709.dtb \
bcm953012er.dtb \
--- /dev/null
+++ b/arch/arm/boot/dts/bcm47094-netgear-r8500.dts
@@ -0,0 +1,104 @@
+/*
+ * Copyright (C) 2016 Rafał Miłecki <rafal@milecki.pl>
+ *
+ * Licensed under the ISC license.
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
+ compatible = "netgear,r8500", "brcm,bcm47094", "brcm,bcm4708";
+ model = "Netgear R8500";
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ memory {
+ reg = <0x00000000 0x08000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ power0 {
+ label = "bcm53xx:white:power";
+ gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "default-on";
+ };
+
+ power1 {
+ label = "bcm53xx:amber:power";
+ gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "default-off";
+ };
+
+ 5ghz-1 {
+ label = "bcm53xx:white:5ghz-1";
+ gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "default-off";
+ };
+
+ 5ghz-2 {
+ label = "bcm53xx:white:5ghz-2";
+ gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "default-off";
+ };
+
+ 2ghz {
+ label = "bcm53xx:white:2ghz";
+ gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "default-off";
+ };
+
+ usb2 {
+ label = "bcm53xx:white:usb2";
+ gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "default-off";
+ };
+
+ usb3 {
+ label = "bcm53xx:white:usb3";
+ gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "default-off";
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ brightness {
+ label = "Backlight";
+ linux,code = <KEY_BRIGHTNESS_ZERO>;
+ gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
+ };
+
+ restart {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
+ };
+
+ wps {
+ label = "WPS";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
+ };
+
+ rfkill {
+ label = "WiFi";
+ linux,code = <KEY_RFKILL>;
+ gpios = <&chipcommon 20 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&uart0 {
+ status = "okay";
+ clock-frequency = <125000000>;
+};

264
target/linux/bcm53xx/patches-4.4/044-0002-ARM-BCM5301X-Add-basic-dts-for-BCM53573-based-Tenda-.patch
View File

@ -1,264 +0,0 @@
From 21c29be6a69d3ef4f5a2e16272deb4845f8208ad Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
Date: Tue, 23 Aug 2016 07:37:43 +0200
Subject: [PATCH] ARM: BCM5301X: Add basic dts for BCM53573 based Tenda AC9
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
BCM53573 seems to be low priced alternative for Northstar chipsts. It
uses single core Cortex-A7 and doesn't have SDU or local (TWD) timer. It
was also stripped out of independent SPI controller and 2 GMACs.
DTS for Tenda AC9 isn't completed yet. It misses e.g. switch entry (we
still need some b53 fixes) and probably some clocks. It adds support for
basic features however and can be improved later.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
arch/arm/boot/dts/Makefile | 2 +
arch/arm/boot/dts/bcm47189-tenda-ac9.dts | 74 ++++++++++++++++
arch/arm/boot/dts/bcm53573.dtsi | 147 +++++++++++++++++++++++++++++++
3 files changed, 223 insertions(+)
create mode 100644 arch/arm/boot/dts/bcm47189-tenda-ac9.dts
create mode 100644 arch/arm/boot/dts/bcm53573.dtsi
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -82,6 +82,8 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
bcm94709.dtb \
bcm953012er.dtb \
bcm953012k.dtb
+dtb-$(CONFIG_ARCH_BCM_53573) += \
+ bcm47189-tenda-ac9.dtb
dtb-$(CONFIG_ARCH_BCM_63XX) += \
bcm963138dvt.dtb
dtb-$(CONFIG_ARCH_BCM_CYGNUS) += \
--- /dev/null
+++ b/arch/arm/boot/dts/bcm47189-tenda-ac9.dts
@@ -0,0 +1,74 @@
+/*
+ * Copyright (C) 2016 Rafał Miłecki <rafal@milecki.pl>
+ *
+ * Licensed under the ISC license.
+ */
+
+/dts-v1/;
+
+#include "bcm53573.dtsi"
+
+/ {
+ compatible = "tenda,ac9", "brcm,bcm47189", "brcm,bcm53573";
+ model = "Tenda AC9";
+
+ chosen {
+ bootargs = "console=ttyS0,115200 earlycon";
+ };
+
+ memory {
+ reg = <0x00000000 0x08000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ usb {
+ label = "bcm53xx:blue:usb";
+ gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "default-off";
+ };
+
+ wps {
+ label = "bcm53xx:blue:wps";
+ gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "default-off";
+ };
+
+ 5ghz {
+ label = "bcm53xx:blue:5ghz";
+ gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "default-off";
+ };
+
+ system {
+ label = "bcm53xx:blue:system";
+ gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "timer";
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ rfkill {
+ label = "WiFi";
+ linux,code = <KEY_RFKILL>;
+ gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+ };
+
+ restart {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
+ };
+
+ wps {
+ label = "WPS";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&chipcommon 9 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
--- /dev/null
+++ b/arch/arm/boot/dts/bcm53573.dtsi
@@ -0,0 +1,147 @@
+/*
+ * Copyright (C) 2016 Rafał Miłecki <rafal@milecki.pl>
+ *
+ * Licensed under the ISC license.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include "skeleton.dtsi"
+
+/ {
+ interrupt-parent = <&gic>;
+
+ chosen {
+ stdout-path = &uart0;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0x0>;
+ };
+ };
+
+ mpcore {
+ compatible = "simple-bus";
+ ranges = <0x00000000 0x18310000 0x00008000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ gic: interrupt-controller@1000 {
+ compatible = "arm,cortex-a7-gic";
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+ interrupt-controller;
+ reg = <0x1000 0x1000>,
+ <0x2000 0x0100>;
+ };
+ };
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ alp: oscillator {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <40000000>;
+ };
+ };
+
+ axi@18000000 {
+ compatible = "brcm,bus-axi";
+ reg = <0x18000000 0x1000>;
+ ranges = <0x00000000 0x18000000 0x00100000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0x000fffff 0xffff>;
+ interrupt-map =
+ /* ChipCommon */
+ <0x00000000 0 &gic GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+
+ /* IEEE 802.11 0 */
+ <0x00001000 0 &gic GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+
+ /* PCIe Controller 0 */
+ <0x00002000 0 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+ <0x00002000 1 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+ <0x00002000 2 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+ <0x00002000 3 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+ <0x00002000 4 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+ <0x00002000 5 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+
+ /* USB 2.0 Controller */
+ <0x00004000 0 &gic GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+
+ /* Ethernet Controller 0 */
+ <0x00005000 0 &gic GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+
+ /* IEEE 802.11 1 */
+ <0x0000a000 0 &gic GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+
+ /* Ethernet Controller 1 */
+ <0x0000b000 0 &gic GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+
+ chipcommon: chipcommon@0 {
+ compatible = "simple-bus";
+ reg = <0x00000000 0x1000>;
+ ranges;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ uart0: serial@0300 {
+ compatible = "ns16550a";
+ reg = <0x0300 0x100>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_PPI 16 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&alp>;
+ status = "okay";
+ };
+ };
+
+ usb2: usb2@4000 {
+ reg = <0x4000 0x1000>;
+ ranges;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ ehci: ehci@4000 {
+ compatible = "generic-ehci";
+ reg = <0x4000 0x1000>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ ohci: ohci@d000 {
+ #usb-cells = <0>;
+
+ compatible = "generic-ohci";
+ reg = <0xd000 0x1000>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+ gmac0: ethernet@5000 {
+ reg = <0x5000 0x1000>;
+ };
+
+ gmac1: ethernet@b000 {
+ reg = <0xb000 0x1000>;
+ };
+ };
+};

70
target/linux/bcm53xx/patches-4.4/044-0003-ARM-BCM5301X-Add-separated-DTS-include-file-for-BCM4.patch
View File

@ -1,70 +0,0 @@
From 345fd105ff676ef672d1e41b31165b47aa040dab Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
Date: Wed, 21 Sep 2016 22:58:32 +0200
Subject: [PATCH] ARM: BCM5301X: Add separated DTS include file for BCM47094
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Use it to store BCM47094 specific properties/values and avoid repeating
them in device DTS files.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts | 3 +--
arch/arm/boot/dts/bcm47094-netgear-r8500.dts | 3 +--
arch/arm/boot/dts/bcm47094.dtsi | 11 +++++++++++
3 files changed, 13 insertions(+), 4 deletions(-)
create mode 100644 arch/arm/boot/dts/bcm47094.dtsi
--- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
+++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
@@ -9,7 +9,7 @@
/dts-v1/;
-#include "bcm4708.dtsi"
+#include "bcm47094.dtsi"
#include "bcm5301x-nand-cs0-bch1.dtsi"
/ {
@@ -107,7 +107,6 @@
&uart0 {
status = "okay";
- clock-frequency = <125000000>;
};
&usb3 {
--- a/arch/arm/boot/dts/bcm47094-netgear-r8500.dts
+++ b/arch/arm/boot/dts/bcm47094-netgear-r8500.dts
@@ -6,7 +6,7 @@
/dts-v1/;
-#include "bcm4708.dtsi"
+#include "bcm47094.dtsi"
#include "bcm5301x-nand-cs0-bch8.dtsi"
/ {
@@ -100,5 +100,4 @@
&uart0 {
status = "okay";
- clock-frequency = <125000000>;
};
--- /dev/null
+++ b/arch/arm/boot/dts/bcm47094.dtsi
@@ -0,0 +1,11 @@
+/*
+ * Copyright (C) 2016 Rafał Miłecki <rafal@milecki.pl>
+ *
+ * Licensed under the ISC license.
+ */
+
+#include "bcm4708.dtsi"
+
+&uart0 {
+ clock-frequency = <125000000>;
+};

92
target/linux/bcm53xx/patches-4.4/044-0004-ARM-BCM5301X-Enable-UART-on-Netgear-R8000.patch
View File

@ -1,92 +0,0 @@
From 3ede027b3dce2fca07350b7587c7c8f44706c94c Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
Date: Wed, 21 Sep 2016 22:58:33 +0200
Subject: [PATCH] ARM: BCM5301X: Enable UART on Netgear R8000
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
It was tested by LEDE users, all we need is to adjust clock frequency.
While we're at it create a separated DTS include file to share code with
other BCM4709 devices easier.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts | 2 +-
arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts | 2 +-
arch/arm/boot/dts/bcm4709-netgear-r7000.dts | 2 +-
arch/arm/boot/dts/bcm4709-netgear-r8000.dts | 6 +++++-
arch/arm/boot/dts/bcm4709.dtsi | 11 +++++++++++
5 files changed, 19 insertions(+), 4 deletions(-)
create mode 100644 arch/arm/boot/dts/bcm4709.dtsi
--- a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
+++ b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
@@ -9,7 +9,7 @@
/dts-v1/;
-#include "bcm4708.dtsi"
+#include "bcm4709.dtsi"
#include "bcm5301x-nand-cs0-bch8.dtsi"
/ {
--- a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
+++ b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
@@ -9,7 +9,7 @@
/dts-v1/;
-#include "bcm4708.dtsi"
+#include "bcm4709.dtsi"
#include "bcm5301x-nand-cs0-bch8.dtsi"
/ {
--- a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
+++ b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
@@ -9,7 +9,7 @@
/dts-v1/;
-#include "bcm4708.dtsi"
+#include "bcm4709.dtsi"
#include "bcm5301x-nand-cs0-bch8.dtsi"
/ {
--- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
+++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
@@ -9,7 +9,7 @@
/dts-v1/;
-#include "bcm4708.dtsi"
+#include "bcm4709.dtsi"
#include "bcm5301x-nand-cs0-bch8.dtsi"
/ {
@@ -107,6 +107,10 @@
};
};
+&uart0 {
+ status = "okay";
+};
+
&usb2 {
vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
};
--- /dev/null
+++ b/arch/arm/boot/dts/bcm4709.dtsi
@@ -0,0 +1,11 @@
+/*
+ * Copyright (C) 2016 Rafał Miłecki <rafal@milecki.pl>
+ *
+ * Licensed under the ISC license.
+ */
+
+#include "bcm4708.dtsi"
+
+&uart0 {
+ clock-frequency = <125000000>;
+};

51
target/linux/bcm53xx/patches-4.4/044-0005-ARM-BCM5301X-Specify-USB-3.0-PHY-in-DT.patch
View File

@ -1,51 +0,0 @@
From 5b92db97f4ae345bd6f045c9427471680a7fe2e7 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
Date: Wed, 21 Sep 2016 22:58:34 +0200
Subject: [PATCH] ARM: BCM5301X: Specify USB 3.0 PHY in DT
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Driver for Northstar USB 3.0 PHY has been recently added under the name
phy-bcm-ns-usb3. Add binding for it into the DT files.
The only slightly tricky part is BCM47094 which uses different PHY
version and requires different compatible value.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
arch/arm/boot/dts/bcm47094.dtsi | 6 ++++++
arch/arm/boot/dts/bcm5301x.dtsi | 7 +++++++
2 files changed, 13 insertions(+)
--- a/arch/arm/boot/dts/bcm47094.dtsi
+++ b/arch/arm/boot/dts/bcm47094.dtsi
@@ -6,6 +6,12 @@
#include "bcm4708.dtsi"
+/ {
+ usb3_phy: usb3-phy {
+ compatible = "brcm,ns-bx-usb3-phy";
+ };
+};
+
&uart0 {
clock-frequency = <125000000>;
};
--- a/arch/arm/boot/dts/bcm5301x.dtsi
+++ b/arch/arm/boot/dts/bcm5301x.dtsi
@@ -149,6 +149,13 @@
clock-names = "phy-ref-clk";
};
+ usb3_phy: usb3-phy {
+ compatible = "brcm,ns-ax-usb3-phy";
+ reg = <0x18105000 0x1000>, <0x18003000 0x1000>;
+ reg-names = "dmp", "ccb-mii";
+ #phy-cells = <0>;
+ };
+
axi@18000000 {
compatible = "brcm,bus-axi";
reg = <0x18000000 0x1000>;

93
target/linux/bcm53xx/patches-4.4/044-0006-ARM-BCM5301X-Add-DT-for-Luxul-XAP-1510.patch
View File

@ -1,93 +0,0 @@
From 46daccf62d1651bf8b09978478ca6465a7a81f47 Mon Sep 17 00:00:00 2001
From: Dan Haab <dhaab@luxul.com>
Date: Tue, 27 Sep 2016 11:27:10 -0600
Subject: [PATCH] ARM: BCM5301X: Add DT for Luxul XAP-1510
Luxul XAP-1510 is an AP device based on BCM4708 SoC with 2 x BCM4360
chipsets on PCB connected using PCIe.
Signed-off-by: Dan Haab <dhaab@luxul.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts | 64 ++++++++++++++++++++++++++++
2 files changed, 65 insertions(+)
create mode 100644 arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -65,6 +65,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
bcm4708-asus-rt-ac56u.dtb \
bcm4708-asus-rt-ac68u.dtb \
bcm4708-buffalo-wzr-1750dhp.dtb \
+ bcm4708-luxul-xap-1510.dtb \
bcm4708-luxul-xwc-1000.dtb \
bcm4708-netgear-r6250.dtb \
bcm4708-netgear-r6300-v2.dtb \
--- /dev/null
+++ b/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts
@@ -0,0 +1,64 @@
+/*
+ * Copyright 2016 Luxul Inc.
+ *
+ * Licensed under the ISC license.
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+
+/ {
+ compatible = "luxul,xap-1510v1", "brcm,bcm4708";
+ model = "Luxul XAP-1510 V1";
+
+ chosen {
+ bootargs = "console=ttyS0,115200 earlycon";
+ };
+
+ memory {
+ reg = <0x00000000 0x08000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ 5ghz {
+ label = "bcm53xx:blue:5ghz";
+ gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "none";
+ };
+
+ 2ghz {
+ label = "bcm53xx:blue:2ghz";
+ gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "none";
+ };
+
+ status {
+ label = "bcm53xx:green:status";
+ gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "timer";
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ restart {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&spi_nor {
+ status = "okay";
+};

159
target/linux/bcm53xx/patches-4.4/044-0007-ARM-BCM5301X-Add-DT-for-Luxul-XWR-3100.patch
View File

@ -1,159 +0,0 @@
From ef3bc318adeb15b38688df6a583bafea2befce43 Mon Sep 17 00:00:00 2001
From: Dan Haab <dhaab@luxul.com>
Date: Tue, 27 Sep 2016 11:27:11 -0600
Subject: [PATCH] ARM: BCM5301X: Add DT for Luxul XWR-3100
Luxul XWR-3100 is a wireless router based on BCM47094 SoC with two
4366c0 FullMAC PCIe cards on the PCB. It uses NAND with BCH-4 ECC
algorithm.
Signed-off-by: Dan Haab <dhaab@luxul.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts | 111 ++++++++++++++++++++++++++
arch/arm/boot/dts/bcm5301x-nand-cs0-bch4.dtsi | 13 +++
3 files changed, 125 insertions(+)
create mode 100644 arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
create mode 100644 arch/arm/boot/dts/bcm5301x-nand-cs0-bch4.dtsi
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -78,6 +78,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
bcm4709-netgear-r7000.dtb \
bcm4709-netgear-r8000.dtb \
bcm47094-dlink-dir-885l.dtb \
+ bcm47094-luxul-xwr-3100.dtb \
bcm47094-netgear-r8500.dtb \
bcm94708.dtb \
bcm94709.dtb \
--- /dev/null
+++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
@@ -0,0 +1,111 @@
+/*
+ * Copyright 2016 Luxul Inc.
+ *
+ * Licensed under the ISC license.
+ */
+
+/dts-v1/;
+
+#include "bcm47094.dtsi"
+#include "bcm5301x-nand-cs0-bch4.dtsi"
+
+/ {
+ compatible = "luxul,xwr-3100v1", "brcm,bcm47094", "brcm,bcm4708";
+ model = "Luxul XWR-3100 V1";
+
+ chosen {
+ bootargs = "console=ttyS0,115200 earlycon";
+ };
+
+ memory {
+ reg = <0x00000000 0x08000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ power {
+ label = "bcm53xx:green:power";
+ gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "default-on";
+ };
+
+ lan3 {
+ label = "bcm53xx:green:lan1";
+ gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "default-off";
+ };
+
+ lan4 {
+ label = "bcm53xx:green:lan0";
+ gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "default-off";
+ };
+
+ wan {
+ label = "bcm53xx:green:wan";
+ gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "default-off";
+ };
+
+ lan1 {
+ label = "bcm53xx:green:lan3";
+ gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "default-off";
+ };
+
+ lan2 {
+ label = "bcm53xx:green:lan2";
+ gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "default-off";
+ };
+
+ usb3 {
+ label = "bcm53xx:green:usb3";
+ gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "default-off";
+ };
+
+ status {
+ label = "bcm53xx:green:status";
+ gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "timer";
+ };
+
+ 2ghz {
+ label = "bcm53xx:green:2ghz";
+ gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "default-off";
+ };
+
+ 5ghz {
+ label = "bcm53xx:green:5ghz";
+ gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "default-off";
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ restart {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&usb3 {
+ vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
+};
+
+&spi_nor {
+ status = "okay";
+};
--- /dev/null
+++ b/arch/arm/boot/dts/bcm5301x-nand-cs0-bch4.dtsi
@@ -0,0 +1,13 @@
+/*
+ * Copyright 2016 Luxul Inc.
+ *
+ * Licensed under the ISC license.
+ */
+
+#include "bcm5301x-nand-cs0.dtsi"
+
+&nandcs {
+ nand-ecc-algo = "bch";
+ nand-ecc-strength = <4>;
+ nand-ecc-step-size = <512>;
+};

38
target/linux/bcm53xx/patches-4.4/044-0008-ARM-BCM53573-Specify-PMU-and-its-ILP-clock-in-the-DT.patch
View File

@ -1,38 +0,0 @@
From 547f23183d9d77b51754689a71e3e58d085ccaec Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
Date: Sat, 17 Sep 2016 22:13:46 +0200
Subject: [PATCH] ARM: BCM53573: Specify PMU and its ILP clock in the DT
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
ILP clock (sometimes called a "slow clock") is a part of PMU (Power
Management Unit). There has been recently added a driver for it, so add
a proper entry in the DT as well.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
arch/arm/boot/dts/bcm53573.dtsi | 12 ++++++++++++
1 file changed, 12 insertions(+)
--- a/arch/arm/boot/dts/bcm53573.dtsi
+++ b/arch/arm/boot/dts/bcm53573.dtsi
@@ -143,5 +143,17 @@
gmac1: ethernet@b000 {
reg = <0xb000 0x1000>;
};
+
+ pmu@12000 {
+ compatible = "simple-mfd", "syscon";
+ reg = <0x00012000 0x00001000>;
+
+ ilp: ilp {
+ compatible = "brcm,bcm53573-ilp";
+ clocks = <&alp>;
+ #clock-cells = <0>;
+ clock-output-names = "ilp";
+ };
+ };
};
};

146
target/linux/bcm53xx/patches-4.4/044-0009-ARM-BCM5301X-Add-DT-for-TP-LINK-Archer-C9-V1.patch
View File

@ -1,146 +0,0 @@
From 41182beb217c47cfbaaf26a60f22a8b3943faa61 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
Date: Sun, 13 Nov 2016 11:12:09 +0100
Subject: [PATCH] ARM: BCM5301X: Add DT for TP-LINK Archer C9 V1
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
It's BCM4709A0 based device with 16 MiB flash, 128 MiB of RAM and two
PCIe based on-PCB BCM4360 chipsets.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts | 114 ++++++++++++++++++++++
2 files changed, 115 insertions(+)
create mode 100644 arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -77,6 +77,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
bcm4709-buffalo-wxr-1900dhp.dtb \
bcm4709-netgear-r7000.dtb \
bcm4709-netgear-r8000.dtb \
+ bcm4709-tplink-archer-c9-v1.dtb \
bcm47094-dlink-dir-885l.dtb \
bcm47094-luxul-xwr-3100.dtb \
bcm47094-netgear-r8500.dtb \
--- /dev/null
+++ b/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
@@ -0,0 +1,114 @@
+/*
+ * Copyright (C) 2016 Rafał Miłecki <rafal@milecki.pl>
+ *
+ * Licensed under the ISC license.
+ */
+
+/dts-v1/;
+
+#include "bcm4709.dtsi"
+
+/ {
+ compatible = "tplink,archer-c9-v1", "brcm,bcm4709", "brcm,bcm4708";
+ model = "TP-LINK Archer C9 V1";
+
+ chosen {
+ bootargs = "console=ttyS0,115200 earlycon";
+ };
+
+ memory {
+ reg = <0x00000000 0x08000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ lan {
+ label = "bcm53xx:blue:lan";
+ gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "default-off";
+ };
+
+ wps {
+ label = "bcm53xx:blue:wps";
+ gpios = <&chipcommon 2 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "default-off";
+ };
+
+ 2ghz {
+ label = "bcm53xx:blue:2ghz";
+ gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "default-off";
+ };
+
+ 5ghz {
+ label = "bcm53xx:blue:5ghz";
+ gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "default-off";
+ };
+
+ usb3 {
+ label = "bcm53xx:blue:usb3";
+ gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "default-off";
+ };
+
+ usb2 {
+ label = "bcm53xx:blue:usb2";
+ gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "default-off";
+ };
+
+ wan-blue {
+ label = "bcm53xx:blue:wan";
+ gpios = <&chipcommon 14 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "default-off";
+ };
+
+ wan-amber {
+ label = "bcm53xx:amber:wan";
+ gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "default-off";
+ };
+
+ power {
+ label = "bcm53xx:blue:power";
+ gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "default-on";
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ wps {
+ label = "WPS";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
+ };
+
+ restart {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&usb2 {
+ vcc-gpio = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
+};
+
+&usb3 {
+ vcc-gpio = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
+};
+
+&spi_nor {
+ status = "okay";
+};

75
target/linux/bcm53xx/patches-4.4/045-ARM-BCM5301X-Add-back-handler-ignoring-external-impr.patch
View File

@ -1,75 +0,0 @@
From 09f3510fb70a46c8921f2cf4a90dbcae460a6820 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
Date: Sat, 29 Oct 2016 13:12:29 +0200
Subject: [PATCH] ARM: BCM5301X: Add back handler ignoring external imprecise
aborts
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Since early BCM5301X days we got abort handler that was removed by
commit 937b12306ea79 ("ARM: BCM5301X: remove workaround imprecise abort
fault handler"). It assumed we need to deal only with pending aborts
left by the bootloader. Unfortunately this isn't true for BCM5301X.
When probing PCI config space (device enumeration) it is expected to
have master aborts on the PCI bus. Most bridges don't forward (or they
allow disabling it) these errors onto the AXI/AMBA bus but not the
Northstar (BCM5301X) one.
iProc PCIe controller on Northstar seems to be some older one, without
a control register for errors forwarding. It means we need to workaround
this at platform level. All newer platforms are not affected by this
issue.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
arch/arm/mach-bcm/bcm_5301x.c | 28 ++++++++++++++++++++++++++++
1 file changed, 28 insertions(+)
--- a/arch/arm/mach-bcm/bcm_5301x.c
+++ b/arch/arm/mach-bcm/bcm_5301x.c
@@ -9,14 +9,42 @@
#include <asm/hardware/cache-l2x0.h>
#include <asm/mach/arch.h>
+#include <asm/siginfo.h>
+#include <asm/signal.h>
+
+#define FSR_EXTERNAL (1 << 12)
+#define FSR_READ (0 << 10)
+#define FSR_IMPRECISE 0x0406
static const char *const bcm5301x_dt_compat[] __initconst = {
"brcm,bcm4708",
NULL,
};
+static int bcm5301x_abort_handler(unsigned long addr, unsigned int fsr,
+ struct pt_regs *regs)
+{
+ /*
+ * We want to ignore aborts forwarded from the PCIe bus that are
+ * expected and shouldn't really be passed by the PCIe controller.
+ * The biggest disadvantage is the same FSR code may be reported when
+ * reading non-existing APB register and we shouldn't ignore that.
+ */
+ if (fsr == (FSR_EXTERNAL | FSR_READ | FSR_IMPRECISE))
+ return 0;
+
+ return 1;
+}
+
+static void __init bcm5301x_init_early(void)
+{
+ hook_fault_code(16 + 6, bcm5301x_abort_handler, SIGBUS, BUS_OBJERR,
+ "imprecise external abort");
+}
+
DT_MACHINE_START(BCM5301X, "BCM5301X")
.l2c_aux_val = 0,
.l2c_aux_mask = ~0,
.dt_compat = bcm5301x_dt_compat,
+ .init_early = bcm5301x_init_early,
MACHINE_END

269
target/linux/bcm53xx/patches-4.4/046-0001-ARM-BCM5301X-Enable-UART-by-default-for-BCM4708-1-BC.patch
View File

@ -1,269 +0,0 @@
From 2b354a7c56f375ba414b9b9c96f160f5749e5e64 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
Date: Thu, 1 Dec 2016 18:40:51 +0100
Subject: [PATCH 1/6] ARM: BCM5301X: Enable UART by default for BCM4708(1),
BCM4709(4) & BCM53012
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Every device tested so far got UART0 (at 0x18000300) working as serial
console. It's most likely part of reference design and all vendors use
it that way.
It seems to be easier to enable it by default and just disable it if we
ever see a device with different hardware design.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: Jon Mason <jon.mason@broadcom.com>
Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts | 4 ----
arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts | 4 ----
arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts | 4 ----
arch/arm/boot/dts/bcm4708-netgear-r6250.dts | 4 ----
arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts | 4 ----
arch/arm/boot/dts/bcm4708.dtsi | 4 ++++
arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts | 4 ----
arch/arm/boot/dts/bcm47081.dtsi | 4 ++++
arch/arm/boot/dts/bcm4709-netgear-r7000.dts | 4 ----
arch/arm/boot/dts/bcm4709-netgear-r8000.dts | 4 ----
arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts | 4 ----
arch/arm/boot/dts/bcm4709.dtsi | 1 +
arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts | 4 ----
arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts | 4 ----
arch/arm/boot/dts/bcm47094-netgear-r8500.dts | 4 ----
arch/arm/boot/dts/bcm47094.dtsi | 1 +
arch/arm/boot/dts/bcm94708.dts | 4 ----
arch/arm/boot/dts/bcm94709.dts | 4 ----
arch/arm/boot/dts/bcm953012er.dts | 4 ----
arch/arm/boot/dts/bcm953012k.dts | 1 -
20 files changed, 10 insertions(+), 61 deletions(-)
--- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
+++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
@@ -136,10 +136,6 @@
};
};
-&uart0 {
- status = "okay";
-};
-
&usb2 {
vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
};
--- a/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts
+++ b/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts
@@ -55,10 +55,6 @@
};
};
-&uart0 {
- status = "okay";
-};
-
&spi_nor {
status = "okay";
};
--- a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
+++ b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
@@ -56,10 +56,6 @@
};
};
-&uart0 {
- status = "okay";
-};
-
&spi_nor {
status = "okay";
};
--- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
+++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
@@ -83,10 +83,6 @@
};
};
-&uart0 {
- status = "okay";
-};
-
&usb3 {
vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
};
--- a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
+++ b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
@@ -119,10 +119,6 @@
};
};
-&uart0 {
- status = "okay";
-};
-
&spi_nor {
status = "okay";
};
--- a/arch/arm/boot/dts/bcm4708.dtsi
+++ b/arch/arm/boot/dts/bcm4708.dtsi
@@ -34,3 +34,7 @@
};
};
+
+&uart0 {
+ status = "okay";
+};
--- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
+++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
@@ -122,7 +122,3 @@
};
};
};
-
-&uart0 {
- status = "okay";
-};
--- a/arch/arm/boot/dts/bcm47081.dtsi
+++ b/arch/arm/boot/dts/bcm47081.dtsi
@@ -24,3 +24,7 @@
};
};
};
+
+&uart0 {
+ status = "okay";
+};
--- a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
+++ b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
@@ -100,7 +100,3 @@
};
};
};
-
-&uart0 {
- status = "okay";
-};
--- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
+++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
@@ -107,10 +107,6 @@
};
};
-&uart0 {
- status = "okay";
-};
-
&usb2 {
vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
};
--- a/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
+++ b/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
@@ -97,10 +97,6 @@
};
};
-&uart0 {
- status = "okay";
-};
-
&usb2 {
vcc-gpio = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
};
--- a/arch/arm/boot/dts/bcm4709.dtsi
+++ b/arch/arm/boot/dts/bcm4709.dtsi
@@ -8,4 +8,5 @@
&uart0 {
clock-frequency = <125000000>;
+ status = "okay";
};
--- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
+++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
@@ -105,10 +105,6 @@
};
};
-&uart0 {
- status = "okay";
-};
-
&usb3 {
vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
};
--- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
+++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
@@ -98,10 +98,6 @@
};
};
-&uart0 {
- status = "okay";
-};
-
&usb3 {
vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
};
--- a/arch/arm/boot/dts/bcm47094-netgear-r8500.dts
+++ b/arch/arm/boot/dts/bcm47094-netgear-r8500.dts
@@ -97,7 +97,3 @@
};
};
};
-
-&uart0 {
- status = "okay";
-};
--- a/arch/arm/boot/dts/bcm47094.dtsi
+++ b/arch/arm/boot/dts/bcm47094.dtsi
@@ -14,4 +14,5 @@
&uart0 {
clock-frequency = <125000000>;
+ status = "okay";
};
--- a/arch/arm/boot/dts/bcm94708.dts
+++ b/arch/arm/boot/dts/bcm94708.dts
@@ -50,7 +50,3 @@
reg = <0x00000000 0x08000000>;
};
};
-
-&uart0 {
- status = "okay";
-};
--- a/arch/arm/boot/dts/bcm94709.dts
+++ b/arch/arm/boot/dts/bcm94709.dts
@@ -50,7 +50,3 @@
reg = <0x00000000 0x08000000>;
};
};
-
-&uart0 {
- status = "okay";
-};
--- a/arch/arm/boot/dts/bcm953012er.dts
+++ b/arch/arm/boot/dts/bcm953012er.dts
@@ -70,10 +70,6 @@
};
};
-&uart0 {
- status = "okay";
-};
-
&spi_nor {
status = "okay";
};
--- a/arch/arm/boot/dts/bcm953012k.dts
+++ b/arch/arm/boot/dts/bcm953012k.dts
@@ -54,7 +54,6 @@
&uart0 {
clock-frequency = <62499840>;
- status = "okay";
};
&uart1 {

43
target/linux/bcm53xx/patches-4.4/046-0002-ARM-BCM5301X-Fix-LAN-LED-labels-for-Luxul-XWR-3100.patch
View File

@ -1,43 +0,0 @@
From 24e24f72379638d598aec5d0525ef57d5bfc5c51 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
Date: Wed, 7 Dec 2016 08:56:51 +0100
Subject: [PATCH 2/6] ARM: BCM5301X: Fix LAN LED labels for Luxul XWR-3100
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
They were named incorrectly most likely due to copy & paste mistake.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
+++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
@@ -31,13 +31,13 @@
};
lan3 {
- label = "bcm53xx:green:lan1";
+ label = "bcm53xx:green:lan3";
gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
linux,default-trigger = "default-off";
};
lan4 {
- label = "bcm53xx:green:lan0";
+ label = "bcm53xx:green:lan4";
gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
linux,default-trigger = "default-off";
};
@@ -49,7 +49,7 @@
};
lan1 {
- label = "bcm53xx:green:lan3";
+ label = "bcm53xx:green:lan1";
gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
linux,default-trigger = "default-off";
};

68
target/linux/bcm53xx/patches-4.4/046-0003-ARM-BCM5301X-Specify-USB-controllers-in-DT.patch
View File

@ -1,68 +0,0 @@
From 45d2567b4b80a3f267502419aaad3d74b745dae7 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
Date: Wed, 7 Dec 2016 08:56:52 +0100
Subject: [PATCH 3/6] ARM: BCM5301X: Specify USB controllers in DT
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
There are 3 separated controllers, one per USB /standard/. With PHY
drivers in place they can be simply supported with generic drivers.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Ray Jui <ray.jui@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
arch/arm/boot/dts/bcm5301x.dtsi | 33 ++++++++++++++++++++++++++++++++-
1 file changed, 32 insertions(+), 1 deletion(-)
--- a/arch/arm/boot/dts/bcm5301x.dtsi
+++ b/arch/arm/boot/dts/bcm5301x.dtsi
@@ -248,8 +248,26 @@
#address-cells = <1>;
#size-cells = <1>;
+ ranges;
- phys = <&usb2_phy>;
+ interrupt-parent = <&gic>;
+
+ ehci: ehci@21000 {
+ #usb-cells = <0>;
+
+ compatible = "generic-ehci";
+ reg = <0x00021000 0x1000>;
+ interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+ phys = <&usb2_phy>;
+ };
+
+ ohci: ohci@22000 {
+ #usb-cells = <0>;
+
+ compatible = "generic-ohci";
+ reg = <0x00022000 0x1000>;
+ interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+ };
};
usb3: usb3@23000 {
@@ -257,6 +275,19 @@
#address-cells = <1>;
#size-cells = <1>;
+ ranges;
+
+ interrupt-parent = <&gic>;
+
+ xhci: xhci@23000 {
+ #usb-cells = <0>;
+
+ compatible = "generic-xhci";
+ reg = <0x00023000 0x1000>;
+ interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+ phys = <&usb3_phy>;
+ phy-names = "usb";
+ };
};
spi@29000 {

31
target/linux/bcm53xx/patches-4.4/046-0004-ARM-BCM5301X-Set-GPIO-enabling-USB-power-on-Netgear-.patch
View File

@ -1,31 +0,0 @@
From 1aca202b721ce8643f87a8f85a686595c1be6b60 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
Date: Wed, 7 Dec 2016 08:56:53 +0100
Subject: [PATCH 4/6] ARM: BCM5301X: Set GPIO enabling USB power on Netgear
R7000
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
There is one GPIO controlling power for both USB ports.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
arch/arm/boot/dts/bcm4709-netgear-r7000.dts | 8 ++++++++
1 file changed, 8 insertions(+)
--- a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
+++ b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
@@ -100,3 +100,11 @@
};
};
};
+
+&usb2 {
+ vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
+};
+
+&usb3 {
+ vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
+};

236
target/linux/bcm53xx/patches-4.4/046-0005-ARM-BCM5301X-Specify-all-RAM-by-including-an-extra-b.patch
View File

@ -1,236 +0,0 @@
From 94afd3b99c65072b76edd25f73bad89587b83261 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
Date: Wed, 7 Dec 2016 08:56:54 +0100
Subject: [PATCH 5/6] ARM: BCM5301X: Specify all RAM by including an extra
block
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
The first 128 MiB of RAM can be accessed using an alias at address 0x0.
In theory we could access whole RAM using 0x80000000 - 0xbfffffff range
(up to 1 GiB) but it doesn't seem to work on Northstar. For some reason
(hardware setup left by the bootloader maybe?) 0x80000000 - 0x87ffffff
range can't be used. I reproduced this problem on:
1) Buffalo WZR-600DHP2 (BCM47081)
2) Netgear R6250 (BCM4708)
3) D-Link DIR-885L (BCM47094)
So it seems we're forced to access first 128 MiB using alias at 0x0 and
the rest using real base address + 128 MiB offset which is 0x88000000.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: Jon Mason <jon.mason@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts | 3 ++-
arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts | 3 ++-
arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts | 3 ++-
arch/arm/boot/dts/bcm4708-netgear-r6250.dts | 3 ++-
arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts | 3 ++-
arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts | 3 ++-
arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts | 3 ++-
arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts | 3 ++-
arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts | 3 ++-
arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts | 3 ++-
arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts | 3 ++-
arch/arm/boot/dts/bcm4709-netgear-r7000.dts | 3 ++-
arch/arm/boot/dts/bcm4709-netgear-r8000.dts | 3 ++-
arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts | 3 ++-
arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts | 3 ++-
arch/arm/boot/dts/bcm47094-netgear-r8500.dts | 3 ++-
16 files changed, 32 insertions(+), 16 deletions(-)
--- a/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts
+++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts
@@ -21,7 +21,8 @@
};
memory {
- reg = <0x00000000 0x08000000>;
+ reg = <0x00000000 0x08000000
+ 0x88000000 0x08000000>;
};
leds {
--- a/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts
+++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts
@@ -21,7 +21,8 @@
};
memory {
- reg = <0x00000000 0x08000000>;
+ reg = <0x00000000 0x08000000
+ 0x88000000 0x08000000>;
};
leds {
--- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
+++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
@@ -21,7 +21,8 @@
};
memory {
- reg = <0x00000000 0x08000000>;
+ reg = <0x00000000 0x08000000
+ 0x88000000 0x18000000>;
};
spi {
--- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
+++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
@@ -21,7 +21,8 @@
};
memory {
- reg = <0x00000000 0x08000000>;
+ reg = <0x00000000 0x08000000
+ 0x88000000 0x08000000>;
};
leds {
--- a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
+++ b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
@@ -21,7 +21,8 @@
};
memory {
- reg = <0x00000000 0x08000000>;
+ reg = <0x00000000 0x08000000
+ 0x88000000 0x08000000>;
};
leds {
--- a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
+++ b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
@@ -21,7 +21,8 @@
};
memory {
- reg = <0x00000000 0x08000000>;
+ reg = <0x00000000 0x08000000
+ 0x88000000 0x08000000>;
};
leds {
--- a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
+++ b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
@@ -21,7 +21,8 @@
};
memory {
- reg = <0x00000000 0x08000000>;
+ reg = <0x00000000 0x08000000
+ 0x88000000 0x08000000>;
};
leds {
--- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
+++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
@@ -21,7 +21,8 @@
};
memory {
- reg = <0x00000000 0x08000000>;
+ reg = <0x00000000 0x08000000
+ 0x88000000 0x08000000>;
};
spi {
--- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
+++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
@@ -21,7 +21,8 @@
};
memory {
- reg = <0x00000000 0x08000000>;
+ reg = <0x00000000 0x08000000
+ 0x88000000 0x08000000>;
};
gpio-keys {
--- a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
+++ b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
@@ -21,7 +21,8 @@
};
memory {
- reg = <0x00000000 0x08000000>;
+ reg = <0x00000000 0x08000000
+ 0x88000000 0x08000000>;
};
leds {
--- a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
+++ b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
@@ -21,7 +21,8 @@
};
memory {
- reg = <0x00000000 0x08000000>;
+ reg = <0x00000000 0x08000000
+ 0x88000000 0x18000000>;
};
leds {
--- a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
+++ b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
@@ -21,7 +21,8 @@
};
memory {
- reg = <0x00000000 0x08000000>;
+ reg = <0x00000000 0x08000000
+ 0x88000000 0x08000000>;
};
leds {
--- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
+++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
@@ -21,7 +21,8 @@
};
memory {
- reg = <0x00000000 0x08000000>;
+ reg = <0x00000000 0x08000000
+ 0x88000000 0x08000000>;
};
leds {
--- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
+++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
@@ -21,7 +21,8 @@
};
memory {
- reg = <0x00000000 0x08000000>;
+ reg = <0x00000000 0x08000000
+ 0x88000000 0x08000000>;
};
nand: nand@18028000 {
--- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
+++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
@@ -18,7 +18,8 @@
};
memory {
- reg = <0x00000000 0x08000000>;
+ reg = <0x00000000 0x08000000
+ 0x88000000 0x08000000>;
};
leds {
--- a/arch/arm/boot/dts/bcm47094-netgear-r8500.dts
+++ b/arch/arm/boot/dts/bcm47094-netgear-r8500.dts
@@ -18,7 +18,8 @@
};
memory {
- reg = <0x00000000 0x08000000>;
+ reg = <0x00000000 0x08000000
+ 0x88000000 0x18000000>;
};
leds {

56
target/linux/bcm53xx/patches-4.4/046-0006-ARM-BCM53573-Specify-USB-ports-of-on-SoC-controllers.patch
View File

@ -1,56 +0,0 @@
From 92c6f000cb3a4280166d812d88cda3011717b548 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
Date: Wed, 7 Dec 2016 08:56:55 +0100
Subject: [PATCH 6/6] ARM: BCM53573: Specify USB ports of on-SoC controllers
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Broadcom OHCI and EHCI controllers always have 2 ports each on the root
hub. Describe them in DT to allow specifying extra info or referencing
port nodes.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
arch/arm/boot/dts/bcm53573.dtsi | 22 ++++++++++++++++++++++
1 file changed, 22 insertions(+)
--- a/arch/arm/boot/dts/bcm53573.dtsi
+++ b/arch/arm/boot/dts/bcm53573.dtsi
@@ -124,6 +124,17 @@
reg = <0x4000 0x1000>;
interrupt-parent = <&gic>;
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ehci_port1: port@1 {
+ reg = <1>;
+ };
+
+ ehci_port2: port@2 {
+ reg = <2>;
+ };
};
ohci: ohci@d000 {
@@ -133,6 +144,17 @@
reg = <0xd000 0x1000>;
interrupt-parent = <&gic>;
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ohci_port1: port@1 {
+ reg = <1>;
+ };
+
+ ohci_port2: port@2 {
+ reg = <2>;
+ };
};
};

126
target/linux/bcm53xx/patches-4.4/046-0007-ARM-BCM5301X-Set-5-GHz-wireless-frequency-limits-on-.patch
View File

@ -1,126 +0,0 @@
From d3af86018715ebb19f4111f80e545405b208f09b Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
Date: Sat, 14 Jan 2017 00:58:57 +0100
Subject: [PATCH] ARM: BCM5301X: Set 5 GHz wireless frequency limits on Netgear
R8000
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Netgear R8000 is a tri-band home router. It has three BCM43602 chipsets
two of them for 5 GHz band. Both seem the same and their firmwares
report the same set of channels. The problem is due to hardware / board
design there are extra limitations that should be respected.
First PHY should be used for U-NII-2 and U-NII-3. Third PHY should be
used for U-NII-1. Using them in a different way may result in wireless
not working or in noticeably reduced performance. Basic version of this
info was provided by Broadcom employee, then it has been verified by me
using original vendor firmware (which has limitations hardcoded in UI).
This patch uses recently introduced ieee80211-freq-limit property to
describe these limitations at DT level.
Referencing PCIe devices in DT required specifying all related bridges.
Below you can see (a bit complex) PCI tree from R8000 that explains all
entries that I needed to put in DT.
0000:00:00.0 14e4:8012 Bridge Device
└─ 0000:01:00.0 14e4:aa52 Network Controller
0001:00:00.0 14e4:8012 Bridge Device
└─ 0001:01:00.0 10b5:8603 Bridge Device
├─ 0001:02:01.0 10b5:8603 Bridge Device
│ └─ 0001:03:00.0 14e4:aa52 Network Controller
├─ 0001:02:02.0 10b5:8603 Bridge Device
│ └─ 0001:04:00.0 14e4:aa52 Network Controller
├─ 0001:02:03.0 000d:0000 0x000000
├─ 0001:02:04.0 000d:0000 0x000000
├─ 0001:02:05.0 000d:0000 0x000000
├─ 0001:02:06.0 000d:0000 0x000000
├─ (...)
├─ 0001:02:1d.0 000d:0000 0x000000
├─ 0001:02:1e.0 000d:0000 0x000000
└─ 0001:02:1f.0 000d:0000 0x000000
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
arch/arm/boot/dts/bcm4709-netgear-r8000.dts | 48 +++++++++++++++++++++++++++++
arch/arm/boot/dts/bcm5301x.dtsi | 8 +++++
2 files changed, 56 insertions(+)
--- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
+++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
@@ -108,6 +108,54 @@
};
};
+&pcie0 {
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ bridge@0,0,0 {
+ reg = <0x0000 0 0 0 0>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ wifi@0,1,0 {
+ reg = <0x0000 0 0 0 0>;
+ ieee80211-freq-limit = <5735000 5835000>;
+ };
+ };
+};
+
+&pcie1 {
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ bridge@1,0,0 {
+ reg = <0x0000 0 0 0 0>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ bridge@1,1,0 {
+ reg = <0x0000 0 0 0 0>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ bridge@1,2,2 {
+ reg = <0x1000 0 0 0 0>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ wifi@1,4,0 {
+ reg = <0x0000 0 0 0 0>;
+ ieee80211-freq-limit = <5170000 5730000>;
+ };
+ };
+ };
+ };
+};
+
&usb2 {
vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
};
--- a/arch/arm/boot/dts/bcm5301x.dtsi
+++ b/arch/arm/boot/dts/bcm5301x.dtsi
@@ -243,6 +243,14 @@
#gpio-cells = <2>;
};
+ pcie0: pcie@12000 {
+ reg = <0x00012000 0x1000>;
+ };
+
+ pcie1: pcie@13000 {
+ reg = <0x00013000 0x1000>;
+ };
+
usb2: usb2@21000 {
reg = <0x00021000 0x1000>;

89
target/linux/bcm53xx/patches-4.4/046-0008-ARM-BCM5301X-Add-DT-for-Luxul-XAP-1410.patch
View File

@ -1,89 +0,0 @@
From eeacbb3e30f220d5d775c61421f813d4e186a325 Mon Sep 17 00:00:00 2001
From: Dan Haab <dhaab@luxul.com>
Date: Sat, 14 Jan 2017 19:29:27 -0700
Subject: [PATCH] ARM: BCM5301X: Add DT for Luxul XAP-1410
Luxul XAP-1410 in a dual-band access point device based on BCM47081 with
serial flash. It has 3 LEDs and just one (reset) button.
Signed-off-by: Dan Haab <dhaab@luxul.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts | 60 +++++++++++++++++++++++++++
2 files changed, 61 insertions(+)
create mode 100644 arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -73,6 +73,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
bcm47081-asus-rt-n18u.dtb \
bcm47081-buffalo-wzr-600dhp2.dtb \
bcm47081-buffalo-wzr-900dhp.dtb \
+ bcm47081-luxul-xap-1410.dtb \
bcm4709-asus-rt-ac87u.dtb \
bcm4709-buffalo-wxr-1900dhp.dtb \
bcm4709-netgear-r7000.dtb \
--- /dev/null
+++ b/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts
@@ -0,0 +1,60 @@
+/*
+ * Copyright 2017 Luxul Inc.
+ *
+ * Licensed under the ISC license.
+ */
+
+/dts-v1/;
+
+#include "bcm47081.dtsi"
+
+/ {
+ compatible = "luxul,xap-1410v1", "brcm,bcm47081", "brcm,bcm4708";
+ model = "Luxul XAP-1410 V1";
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ memory {
+ reg = <0x00000000 0x08000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ 5ghz {
+ label = "bcm53xx:blue:5ghz";
+ gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "none";
+ };
+
+ 2ghz {
+ label = "bcm53xx:blue:2ghz";
+ gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "none";
+ };
+
+ status {
+ label = "bcm53xx:green:status";
+ gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "timer";
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ restart {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&spi_nor {
+ status = "okay";
+};

136
target/linux/bcm53xx/patches-4.4/046-0009-ARM-BCM5301X-Add-DT-for-Luxul-XWR-1200.patch
View File

@ -1,136 +0,0 @@
From 514647c9af870bd2df2e579134a26bff8d17b6b9 Mon Sep 17 00:00:00 2001
From: Dan Haab <dhaab@luxul.com>
Date: Sat, 14 Jan 2017 19:29:28 -0700
Subject: [PATCH] ARM: BCM5301X: Add DT for Luxul XWR-1200
Luxul XWR-1200 in a dual-band router based on BCM47081. It uses serial
flash (for bootloader and NVRAM) and NAND flash (for firmware).
Signed-off-by: Dan Haab <dhaab@luxul.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts | 107 ++++++++++++++++++++++++++
2 files changed, 108 insertions(+)
create mode 100644 arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -74,6 +74,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
bcm47081-buffalo-wzr-600dhp2.dtb \
bcm47081-buffalo-wzr-900dhp.dtb \
bcm47081-luxul-xap-1410.dtb \
+ bcm47081-luxul-xwr-1200.dtb \
bcm4709-asus-rt-ac87u.dtb \
bcm4709-buffalo-wxr-1900dhp.dtb \
bcm4709-netgear-r7000.dtb \
--- /dev/null
+++ b/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts
@@ -0,0 +1,107 @@
+/*
+ * Copyright 2017 Luxul Inc.
+ *
+ * Licensed under the ISC license.
+ */
+
+/dts-v1/;
+
+#include "bcm47081.dtsi"
+#include "bcm5301x-nand-cs0-bch4.dtsi"
+
+/ {
+ compatible = "luxul,xwr-1200v1", "brcm,bcm47081", "brcm,bcm4708";
+ model = "Luxul XWR-1200 V1";
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ memory {
+ reg = <0x00000000 0x08000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ power {
+ label = "bcm53xx:green:power";
+ gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "default-on";
+ };
+
+ lan3 {
+ label = "bcm53xx:green:lan3";
+ gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "none";
+ };
+
+ lan4 {
+ label = "bcm53xx:green:lan4";
+ gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "none";
+ };
+
+ wan {
+ label = "bcm53xx:green:wan";
+ gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "none";
+ };
+
+ lan2 {
+ label = "bcm53xx:green:lan2";
+ gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "none";
+ };
+
+ usb {
+ label = "bcm53xx:green:usb";
+ gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "none";
+ };
+
+ status {
+ label = "bcm53xx:green:status";
+ gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "timer";
+ };
+
+ 2ghz {
+ label = "bcm53xx:green:2ghz";
+ gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "none";
+ };
+
+ 5ghz {
+ label = "bcm53xx:green:5ghz";
+ gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "none";
+ };
+
+ lan1 {
+ label = "bcm53xx:green:lan1";
+ gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "none";
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ restart {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&usb2 {
+ vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
+};
+
+&spi_nor {
+ status = "okay";
+};

72
target/linux/bcm53xx/patches-4.4/047-0001-ARM-dts-BCM5301X-Add-basic-DT-for-Linksys-EA9200.patch
View File

@ -1,72 +0,0 @@
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
Subject: [PATCH] ARM: dts: BCM5301X: Add basic DT for Linksys EA9200
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
It's tri-band wireless home router based on BCM4709A0 with 3 x BCM43602
chipsets. LEDs will be hopefully added later to the DT.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/bcm4709-linksys-ea9200.dts | 42 ++++++++++++++++++++++++++++
2 files changed, 43 insertions(+)
create mode 100644 arch/arm/boot/dts/bcm4709-linksys-ea9200.dts
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -77,6 +77,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
bcm47081-luxul-xwr-1200.dtb \
bcm4709-asus-rt-ac87u.dtb \
bcm4709-buffalo-wxr-1900dhp.dtb \
+ bcm4709-linksys-ea9200.dtb \
bcm4709-netgear-r7000.dtb \
bcm4709-netgear-r8000.dtb \
bcm4709-tplink-archer-c9-v1.dtb \
--- /dev/null
+++ b/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts
@@ -0,0 +1,42 @@
+/*
+ * Copyright (C) 2017 Rafał Miłecki <rafal@milecki.pl>
+ *
+ * Licensed under the ISC license.
+ */
+
+/dts-v1/;
+
+#include "bcm4709.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
+ compatible = "linksys,ea9200", "brcm,bcm4709", "brcm,bcm4708";
+ model = "Linksys EA9200";
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ memory {
+ reg = <0x00000000 0x08000000
+ 0x88000000 0x08000000>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ wps {
+ label = "WPS";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+ };
+
+ restart {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
+ };
+ };
+};

73
target/linux/bcm53xx/patches-4.4/047-0002-ARM-dts-BCM5301X-Add-basic-DT-for-Linksys-EA6300-V1.patch
View File

@ -1,73 +0,0 @@
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
Subject: [PATCH] ARM: dts: BCM5301X: Add basic DT for Linksys EA6300 V1
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
It's wireless home router based on BCM4708A0 with BCM4360 + BCM43217
wireless chipsets. LEDs will be hopefully added later to the DT.
According to some sources it may use the same board as EA6400 and just
differ by an original vendor firmware.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts | 41 +++++++++++++++++++++++++
2 files changed, 42 insertions(+)
create mode 100644 arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -65,6 +65,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
bcm4708-asus-rt-ac56u.dtb \
bcm4708-asus-rt-ac68u.dtb \
bcm4708-buffalo-wzr-1750dhp.dtb \
+ bcm4708-linksys-ea6300-v1.dtb \
bcm4708-luxul-xap-1510.dtb \
bcm4708-luxul-xwc-1000.dtb \
bcm4708-netgear-r6250.dtb \
--- /dev/null
+++ b/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts
@@ -0,0 +1,41 @@
+/*
+ * Copyright (C) 2017 Rafał Miłecki <rafal@milecki.pl>
+ *
+ * Licensed under the ISC license.
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
+ compatible = "linksys,ea6300-v1", "brcm,bcm4708";
+ model = "Linksys EA6300 V1";
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ memory {
+ reg = <0x00000000 0x08000000>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ wps {
+ label = "WPS";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
+ };
+
+ restart {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+ };
+ };
+};

54
target/linux/bcm53xx/patches-4.4/047-0003-ARM-dts-BCM5301X-Add-NAND-entries-to-bcm953012k.patch
View File

@ -1,54 +0,0 @@
From 3344d946ff277425052383e0a7877baf39911046 Mon Sep 17 00:00:00 2001
From: Jon Mason <jon.mason@broadcom.com>
Date: Wed, 8 Feb 2017 15:45:15 -0500
Subject: [PATCH] ARM: dts: BCM5301X: Add NAND entries to bcm953012k
Add the NAND entry in the DTS for the bcm953012k reference board.
Signed-off-by: Jon Mason <jon.mason@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
arch/arm/boot/dts/bcm953012k.dts | 32 ++++++++++++++++++++++++++++++++
1 file changed, 32 insertions(+)
--- a/arch/arm/boot/dts/bcm953012k.dts
+++ b/arch/arm/boot/dts/bcm953012k.dts
@@ -52,6 +52,38 @@
};
};
+&nand {
+ nandcs@0 {
+ compatible = "brcm,nandcs";
+ reg = <0>;
+ nand-on-flash-bbt;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ nand-ecc-strength = <4>;
+ nand-ecc-step-size = <512>;
+
+ partition@0 {
+ label = "nboot";
+ reg = <0x00000000 0x00200000>;
+ read-only;
+ };
+ partition@200000 {
+ label = "nenv";
+ reg = <0x00200000 0x00400000>;
+ };
+ partition@600000 {
+ label = "nsystem";
+ reg = <0x00600000 0x00a00000>;
+ };
+ partition@1000000 {
+ label = "nrootfs";
+ reg = <0x01000000 0x07000000>;
+ };
+ };
+};
+
&uart0 {
clock-frequency = <62499840>;
};

69
target/linux/bcm53xx/patches-4.4/047-0005-ARM-dts-BCM5301X-Add-basic-DT-for-Linksys-EA9500.patch
View File

@ -1,69 +0,0 @@
From 3dc9eca8ece2934047f1d5c290fd36c0e8698756 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
Date: Thu, 23 Feb 2017 14:06:36 +0100
Subject: [PATCH] ARM: dts: BCM5301X: Add basic DT for Linksys EA9500
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
It's tri-band wireless home router based on BCM47094 AKA BCM4709C0. It
uses 3 x BCM4366 chipsets for wireless.
Panamera seems to be board name used by Linksys.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/bcm47094-linksys-panamera.dts | 36 +++++++++++++++++++++++++
2 files changed, 37 insertions(+)
create mode 100644 arch/arm/boot/dts/bcm47094-linksys-panamera.dts
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -83,6 +83,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
bcm4709-netgear-r8000.dtb \
bcm4709-tplink-archer-c9-v1.dtb \
bcm47094-dlink-dir-885l.dtb \
+ bcm47094-linksys-panamera.dtb \
bcm47094-luxul-xwr-3100.dtb \
bcm47094-netgear-r8500.dtb \
bcm94708.dtb \
--- /dev/null
+++ b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
@@ -0,0 +1,36 @@
+/*
+ * Copyright (C) 2017 Rafał Miłecki <rafal@milecki.pl>
+ *
+ * Licensed under the ISC license.
+ */
+
+/dts-v1/;
+
+#include "bcm47094.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
+ compatible = "linksys,panamera", "brcm,bcm47094", "brcm,bcm4708";
+ model = "Linksys EA9500";
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ memory {
+ reg = <0x00000000 0x08000000
+ 0x88000000 0x08000000>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ wps {
+ label = "WPS";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+ };
+ };
+};

129
target/linux/bcm53xx/patches-4.4/047-0006-ARM-dts-BCM5301X-Add-support-for-BCM953012HR.patch
View File

@ -1,129 +0,0 @@
From 475dcdec8cd1bb1b73ddfd9f872822bf4ad9c242 Mon Sep 17 00:00:00 2001
From: Steve Lin <steven.lin1@broadcom.com>
Date: Thu, 23 Feb 2017 14:23:03 -0500
Subject: [PATCH] ARM: dts: BCM5301X: Add support for BCM953012HR
Initial version of DTS to support Broadcom BCM953012HR Northstar
HR platform, similar to, but not the same as existing 953012K.
Signed-off-by: Steve Lin <steven.lin1@broadcom.com>
Acked-by: Jon Mason <jon.mason@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/bcm953012hr.dts | 99 +++++++++++++++++++++++++++++++++++++++
2 files changed, 100 insertions(+)
create mode 100644 arch/arm/boot/dts/bcm953012hr.dts
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -89,6 +89,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
bcm94708.dtb \
bcm94709.dtb \
bcm953012er.dtb \
+ bcm953012hr.dtb \
bcm953012k.dtb
dtb-$(CONFIG_ARCH_BCM_53573) += \
bcm47189-tenda-ac9.dtb
--- /dev/null
+++ b/arch/arm/boot/dts/bcm953012hr.dts
@@ -0,0 +1,99 @@
+/*
+ * SPDX-License-Identifier: BSD-3-Clause
+ *
+ * Copyright(c) 2017 Broadcom
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Broadcom nor the names of its contributors
+ * may be used to endorse or promote products derived from this
+ * software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+#include "bcm5301x-nand-cs0-bch4.dtsi"
+
+/ {
+ model = "NorthStar HR (BCM953012HR)";
+ compatible = "brcm,bcm953012hr", "brcm,brcm53012", "brcm,bcm4708";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@80000000 {
+ reg = <0x80000000 0x10000000>;
+ };
+};
+
+&nandcs {
+ partition@0 {
+ label = "nboot";
+ reg = <0x00000000 0x00200000>;
+ read-only;
+ };
+ partition@200000 {
+ label = "nenv";
+ reg = <0x00200000 0x00400000>;
+ };
+ partition@600000 {
+ label = "nsystem";
+ reg = <0x00600000 0x00a00000>;
+ };
+ partition@1000000 {
+ label = "nrootfs";
+ reg = <0x01000000 0x07000000>;
+ };
+};
+
+&spi_nor {
+ status = "okay";
+ spi-max-frequency = <62500000>;
+ m25p,default-addr-width = <3>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "boot";
+ reg = <0x00000000 0x000d0000>;
+ };
+ partition@d000 {
+ label = "env";
+ reg = <0x000d0000 0x00030000>;
+ };
+ partition@100000 {
+ label = "system";
+ reg = <0x00100000 0x00600000>;
+ };
+ partition@700000 {
+ label = "rootfs";
+ reg = <0x00700000 0x00900000>;
+ };
+};

70
target/linux/bcm53xx/patches-4.4/047-0007-ARM-dts-BCM53573-Describe-Tenda-AC9-PCIe-card-in-DT.patch
View File

@ -1,70 +0,0 @@
From 3ba1bae984e585f500b8406b1bf3e42e0ec752b7 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
Date: Tue, 14 Feb 2017 17:49:05 +0100
Subject: [PATCH] ARM: dts: BCM53573: Describe Tenda AC9 PCIe card in DT
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Tenda AC9 has PCIe controller with just one device connected to it:
0000:00:00.0 14e4:d145 Bridge Device
└─ 0000:01:00.0 14e4:a8db Network Controller
This card is directly on SoC (doesn't use physical connector) and has
BCM43217 chipset with bcma bus. One of its components is ChipCommon core
which is also a GPIO controller. We need to describe it to be able to
add devices using its GPIO pins.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
arch/arm/boot/dts/bcm47189-tenda-ac9.dts | 27 +++++++++++++++++++++++++++
arch/arm/boot/dts/bcm53573.dtsi | 4 ++++
2 files changed, 31 insertions(+)
--- a/arch/arm/boot/dts/bcm47189-tenda-ac9.dts
+++ b/arch/arm/boot/dts/bcm47189-tenda-ac9.dts
@@ -72,3 +72,30 @@
};
};
};
+
+&pcie0 {
+ ranges = <0x00000000 0 0 0 0 0x00100000>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ bridge@0,0,0 {
+ reg = <0x0000 0 0 0 0>;
+ ranges = <0x00000000 0 0 0 0 0 0 0x00100000>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ wifi@0,1,0 {
+ reg = <0x0000 0 0 0 0>;
+ ranges = <0x00000000 0 0 0 0x00100000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ pcie0_chipcommon: chipcommon@0 {
+ reg = <0 0x1000>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+ };
+ };
+};
--- a/arch/arm/boot/dts/bcm53573.dtsi
+++ b/arch/arm/boot/dts/bcm53573.dtsi
@@ -113,6 +113,10 @@
};
};
+ pcie0: pcie@2000 {
+ reg = <0x00002000 0x1000>;
+ };
+
usb2: usb2@4000 {
reg = <0x4000 0x1000>;
ranges;

36
target/linux/bcm53xx/patches-4.4/047-0008-ARM-dts-BCM53573-Add-Tenda-AC9-2-GHz-LED.patch
View File

@ -1,36 +0,0 @@
From 86cd47e761c773f2384ac2041730d7ccfeb40095 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
Date: Tue, 14 Feb 2017 17:49:06 +0100
Subject: [PATCH] ARM: dts: BCM53573: Add Tenda AC9 2 GHz LED
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
It's connected to a GPIO pin of an extra controller placed on the PCIe
card.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
arch/arm/boot/dts/bcm47189-tenda-ac9.dts | 10 ++++++++++
1 file changed, 10 insertions(+)
--- a/arch/arm/boot/dts/bcm47189-tenda-ac9.dts
+++ b/arch/arm/boot/dts/bcm47189-tenda-ac9.dts
@@ -48,6 +48,16 @@
};
};
+ pcie0_leds {
+ compatible = "gpio-leds";
+
+ 2ghz {
+ label = "bcm53xx:blue:2ghz";
+ gpios = <&pcie0_chipcommon 3 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "default-off";
+ };
+ };
+
gpio-keys {
compatible = "gpio-keys";
#address-cells = <1>;

265
target/linux/bcm53xx/patches-4.4/047-0009-ARM-dts-BCM5301X-Relicense-DTS-files-I-created-to-th.patch
View File

@ -1,265 +0,0 @@
From 153580bd3e242c204bb8b1946d76da78e826f555 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
Date: Sat, 28 Jan 2017 12:51:35 +0100
Subject: [PATCH] ARM: dts: BCM5301X: Relicense DTS files I created to the ISC
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
It's preferred to have DT source files licensed under BSD compatible
license. All new BCM5301X DTS files use ISC so let's also relicense old
ones to it.
Except for me only Hauke was ever touched these files in his commit
9faa5960eef3 ("ARM: BCM5301X: add NAND flash chip description") and
commit bb1d8fba1965 ("ARM: BCM5301X: add NAND flash chip description for
Asus RT-AC87U").
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts | 12 +++++++++++-
arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts | 12 +++++++++++-
arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts | 12 +++++++++++-
arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts | 12 +++++++++++-
arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts | 12 +++++++++++-
arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts | 12 +++++++++++-
arch/arm/boot/dts/bcm47081.dtsi | 12 +++++++++++-
arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts | 12 +++++++++++-
arch/arm/boot/dts/bcm4709-netgear-r7000.dts | 12 +++++++++++-
arch/arm/boot/dts/bcm4709-netgear-r8000.dts | 12 +++++++++++-
arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts | 12 +++++++++++-
11 files changed, 121 insertions(+), 11 deletions(-)
--- a/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts
+++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts
@@ -4,7 +4,17 @@
*
* Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
*
- * Licensed under the GNU/GPL. See COPYING for details.
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
+ * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
+ * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
+ * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
+ * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
+ * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+ * PERFORMANCE OF THIS SOFTWARE.
*/
/dts-v1/;
--- a/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts
+++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts
@@ -4,7 +4,17 @@
*
* Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
*
- * Licensed under the GNU/GPL. See COPYING for details.
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
+ * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
+ * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
+ * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
+ * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
+ * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+ * PERFORMANCE OF THIS SOFTWARE.
*/
/dts-v1/;
--- a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
+++ b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
@@ -4,7 +4,17 @@
*
* Copyright (C) 2014 Rafał Miłecki <zajec5@gmail.com>
*
- * Licensed under the GNU/GPL. See COPYING for details.
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
+ * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
+ * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
+ * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
+ * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
+ * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+ * PERFORMANCE OF THIS SOFTWARE.
*/
/dts-v1/;
--- a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
+++ b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
@@ -4,7 +4,17 @@
*
* Copyright (C) 2014 Rafał Miłecki <zajec5@gmail.com>
*
- * Licensed under the GNU/GPL. See COPYING for details.
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
+ * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
+ * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
+ * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
+ * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
+ * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+ * PERFORMANCE OF THIS SOFTWARE.
*/
/dts-v1/;
--- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
+++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
@@ -4,7 +4,17 @@
*
* Copyright (C) 2014 Rafał Miłecki <zajec5@gmail.com>
*
- * Licensed under the GNU/GPL. See COPYING for details.
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
+ * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
+ * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
+ * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
+ * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
+ * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+ * PERFORMANCE OF THIS SOFTWARE.
*/
/dts-v1/;
--- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
+++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
@@ -4,7 +4,17 @@
*
* Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
*
- * Licensed under the GNU/GPL. See COPYING for details.
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
+ * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
+ * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
+ * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
+ * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
+ * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+ * PERFORMANCE OF THIS SOFTWARE.
*/
/dts-v1/;
--- a/arch/arm/boot/dts/bcm47081.dtsi
+++ b/arch/arm/boot/dts/bcm47081.dtsi
@@ -4,7 +4,17 @@
*
* Copyright © 2014 Rafał Miłecki <zajec5@gmail.com>
*
- * Licensed under the GNU/GPL. See COPYING for details.
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
+ * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
+ * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
+ * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
+ * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
+ * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+ * PERFORMANCE OF THIS SOFTWARE.
*/
#include "bcm5301x.dtsi"
--- a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
+++ b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
@@ -4,7 +4,17 @@
*
* Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
*
- * Licensed under the GNU/GPL. See COPYING for details.
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
+ * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
+ * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
+ * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
+ * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
+ * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+ * PERFORMANCE OF THIS SOFTWARE.
*/
/dts-v1/;
--- a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
+++ b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
@@ -4,7 +4,17 @@
*
* Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
*
- * Licensed under the GNU/GPL. See COPYING for details.
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
+ * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
+ * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
+ * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
+ * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
+ * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+ * PERFORMANCE OF THIS SOFTWARE.
*/
/dts-v1/;
--- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
+++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
@@ -4,7 +4,17 @@
*
* Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
*
- * Licensed under the GNU/GPL. See COPYING for details.
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
+ * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
+ * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
+ * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
+ * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
+ * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+ * PERFORMANCE OF THIS SOFTWARE.
*/
/dts-v1/;
--- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
+++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
@@ -4,7 +4,17 @@
*
* Copyright (C) 2016 Rafał Miłecki <zajec5@gmail.com>
*
- * Licensed under the GNU/GPL. See COPYING for details.
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
+ * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
+ * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
+ * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
+ * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
+ * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+ * PERFORMANCE OF THIS SOFTWARE.
*/
/dts-v1/;

66
target/linux/bcm53xx/patches-4.4/047-0010-ARM-dts-BCM5301X-Add-missing-Netgear-R8000-LEDs-and-.patch
View File

@ -1,66 +0,0 @@
From 4a5782a889cfbc8523d7097c3f147572ed5129a6 Mon Sep 17 00:00:00 2001
From: Aditya Xavier <adityaxavier@gmail.com>
Date: Sat, 28 Jan 2017 20:07:49 +0530
Subject: [PATCH] ARM: dts: BCM5301X: Add missing Netgear R8000 LEDs and Keys
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Added two WAN status LEDs and a GPIO key for brightness which were
missing.
Signed-off-by: Aditya Xavier <adityaxavier@gmail.com>
Acked-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
arch/arm/boot/dts/bcm4709-netgear-r8000.dts | 22 ++++++++++++++++++++--
1 file changed, 20 insertions(+), 2 deletions(-)
--- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
+++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
@@ -38,18 +38,30 @@
leds {
compatible = "gpio-leds";
- power0 {
+ power-white {
label = "bcm53xx:white:power";
gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
linux,default-trigger = "default-on";
};
- power1 {
+ power-amber {
label = "bcm53xx:amber:power";
gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
linux,default-trigger = "default-off";
};
+ wan-white {
+ label = "bcm53xx:white:wan";
+ gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "default-on";
+ };
+
+ wan-amber {
+ label = "bcm53xx:amber:wan";
+ gpios = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "default-off";
+ };
+
5ghz-1 {
label = "bcm53xx:white:5ghz-1";
gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>;
@@ -115,6 +127,12 @@
linux,code = <KEY_RESTART>;
gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
};
+
+ brightness {
+ label = "Backlight";
+ linux,code = <KEY_BRIGHTNESS_ZERO>;
+ gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>;
+ };
};
};

50
target/linux/bcm53xx/patches-4.4/047-0011-ARM-dts-BCM53573-Don-t-use-nonexistent-default-off-L.patch
View File

@ -1,50 +0,0 @@
From 820a3e952b266d4355e89ed91c9b11945030321e Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
Date: Wed, 8 Mar 2017 07:41:04 +0100
Subject: [PATCH] ARM: dts: BCM53573: Don't use nonexistent "default-off" LED
trigger
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Such a trigger doesn't exist in Linux and is not needed as LED is being
turned off by default. This could cause errors in LEDs core code when
trying to set default trigger.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
arch/arm/boot/dts/bcm47189-tenda-ac9.dts | 4 ----
1 file changed, 4 deletions(-)
--- a/arch/arm/boot/dts/bcm47189-tenda-ac9.dts
+++ b/arch/arm/boot/dts/bcm47189-tenda-ac9.dts
@@ -26,19 +26,16 @@
usb {
label = "bcm53xx:blue:usb";
gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "default-off";
};
wps {
label = "bcm53xx:blue:wps";
gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "default-off";
};
5ghz {
label = "bcm53xx:blue:5ghz";
gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "default-off";
};
system {
@@ -54,7 +51,6 @@
2ghz {
label = "bcm53xx:blue:2ghz";
gpios = <&pcie0_chipcommon 3 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "default-off";
};
};

651
target/linux/bcm53xx/patches-4.4/047-0012-ARM-dts-BCM5301X-Don-t-use-nonexistent-default-off-L.patch
View File

@ -1,651 +0,0 @@
From 0b660259e927177dc0c6eb3b1c39f23c6a011c5f Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
Date: Wed, 8 Mar 2017 07:41:05 +0100
Subject: [PATCH] ARM: dts: BCM5301X: Don't use nonexistent "default-off" LED
trigger
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Such a trigger doesn't exist in Linux and is not needed as LED is being
turned off by default. This could cause errors in LEDs core code when
trying to set default trigger.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts | 5 -----
arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts | 2 --
arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts | 5 -----
arch/arm/boot/dts/bcm4708-netgear-r6250.dts | 3 ---
arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts | 3 ---
arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts | 10 ----------
arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts | 2 --
arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts | 4 ----
arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts | 2 --
arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts | 8 --------
arch/arm/boot/dts/bcm4709-netgear-r7000.dts | 7 -------
arch/arm/boot/dts/bcm4709-netgear-r8000.dts | 9 ---------
arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts | 8 --------
arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts | 6 ------
arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts | 8 --------
arch/arm/boot/dts/bcm47094-netgear-r8500.dts | 6 ------
16 files changed, 88 deletions(-)
--- a/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts
+++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts
@@ -41,19 +41,16 @@
usb3 {
label = "bcm53xx:blue:usb3";
gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "default-off";
};
wan {
label = "bcm53xx:blue:wan";
gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "default-off";
};
lan {
label = "bcm53xx:blue:lan";
gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "default-off";
};
power {
@@ -71,14 +68,12 @@
2ghz {
label = "bcm53xx:blue:2ghz";
gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "default-off";
};
usb2 {
label = "bcm53xx:blue:usb2";
gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "default-off";
};
};
--- a/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts
+++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts
@@ -41,7 +41,6 @@
usb2 {
label = "bcm53xx:blue:usb2";
gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "default-off";
};
power {
@@ -59,7 +58,6 @@
usb3 {
label = "bcm53xx:blue:usb3";
gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "default-off";
};
};
--- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
+++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
@@ -52,13 +52,11 @@
usb {
label = "bcm53xx:blue:usb";
gpios = <&hc595 0 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "default-off";
};
power0 {
label = "bcm53xx:red:power";
gpios = <&hc595 1 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "default-off";
};
power1 {
@@ -76,7 +74,6 @@
router1 {
label = "bcm53xx:amber:router";
gpios = <&hc595 4 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "default-off";
};
wan {
@@ -88,13 +85,11 @@
wireless0 {
label = "bcm53xx:blue:wireless";
gpios = <&hc595 6 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "default-off";
};
wireless1 {
label = "bcm53xx:amber:wireless";
gpios = <&hc595 7 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "default-off";
};
};
--- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
+++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
@@ -43,19 +43,16 @@
power1 {
label = "bcm53xx:amber:power";
gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "default-off";
};
usb {
label = "bcm53xx:blue:usb";
gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "default-off";
};
wireless {
label = "bcm53xx:blue:wireless";
gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "default-off";
};
};
--- a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
+++ b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
@@ -47,7 +47,6 @@
power0 {
label = "bcm53xx:green:power";
gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "default-off";
};
power1 {
@@ -59,13 +58,11 @@
usb {
label = "bcm53xx:blue:usb";
gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "default-off";
};
wireless {
label = "bcm53xx:blue:wireless";
gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "default-off";
};
};
--- a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
+++ b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
@@ -37,61 +37,51 @@
power-amber {
label = "bcm53xx:amber:power";
gpios = <&chipcommon 2 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "default-off";
};
usb2 {
label = "bcm53xx:white:usb2";
gpios = <&chipcommon 3 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "default-off";
};
usb3-white {
label = "bcm53xx:white:usb3";
gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "default-off";
};
usb3-green {
label = "bcm53xx:green:usb3";
gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "default-off";
};
wps {
label = "bcm53xx:white:wps";
gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "default-off";
};
status-red {
label = "bcm53xx:red:status";
gpios = <&chipcommon 8 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "default-off";
};
status-green {
label = "bcm53xx:green:status";
gpios = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "default-off";
};
status-blue {
label = "bcm53xx:blue:status";
gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "default-off";
};
wan-white {
label = "bcm53xx:white:wan";
gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "default-off";
};
wan-red {
label = "bcm53xx:red:wan";
gpios = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "default-off";
};
};
--- a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
+++ b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
@@ -47,7 +47,6 @@
usb2 {
label = "bcm53xx:blue:usb2";
gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "default-off";
};
wan {
@@ -65,7 +64,6 @@
usb3 {
label = "bcm53xx:blue:usb3";
gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "default-off";
};
};
--- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
+++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
@@ -68,7 +68,6 @@
power1 {
label = "bcm53xx:red:power";
gpios = <&hc595 2 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "default-off";
};
router0 {
@@ -80,7 +79,6 @@
router1 {
label = "bcm53xx:amber:router";
gpios = <&hc595 4 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "default-off";
};
wan {
@@ -92,13 +90,11 @@
wireless0 {
label = "bcm53xx:green:wireless";
gpios = <&hc595 6 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "default-off";
};
wireless1 {
label = "bcm53xx:amber:wireless";
gpios = <&hc595 7 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "default-off";
};
};
--- a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
+++ b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
@@ -41,7 +41,6 @@
wps {
label = "bcm53xx:blue:wps";
gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "default-off";
};
power {
@@ -53,7 +52,6 @@
wan {
label = "bcm53xx:red:wan";
gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "default-off";
};
};
--- a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
+++ b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
@@ -31,13 +31,11 @@
usb {
label = "bcm53xx:green:usb";
gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "default-off";
};
power-amber {
label = "bcm53xx:amber:power";
gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "default-off";
};
power-white {
@@ -49,37 +47,31 @@
router-amber {
label = "bcm53xx:amber:router";
gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "default-off";
};
router-white {
label = "bcm53xx:white:router";
gpios = <&chipcommon 8 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "default-off";
};
wan-amber {
label = "bcm53xx:amber:wan";
gpios = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "default-off";
};
wan-white {
label = "bcm53xx:white:wan";
gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "default-off";
};
wireless-amber {
label = "bcm53xx:amber:wireless";
gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "default-off";
};
wireless-white {
label = "bcm53xx:white:wireless";
gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "default-off";
};
};
--- a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
+++ b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
@@ -47,43 +47,36 @@
power-amber {
label = "bcm53xx:amber:power";
gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "default-off";
};
5ghz {
label = "bcm53xx:white:5ghz";
gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "default-off";
};
2ghz {
label = "bcm53xx:white:2ghz";
gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "default-off";
};
wps {
label = "bcm53xx:white:wps";
gpios = <&chipcommon 14 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "default-off";
};
wireless {
label = "bcm53xx:white:wireless";
gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "default-off";
};
usb3 {
label = "bcm53xx:white:usb3";
gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "default-off";
};
usb2 {
label = "bcm53xx:white:usb2";
gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "default-off";
};
};
--- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
+++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
@@ -47,7 +47,6 @@
power-amber {
label = "bcm53xx:amber:power";
gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "default-off";
};
wan-white {
@@ -59,49 +58,41 @@
wan-amber {
label = "bcm53xx:amber:wan";
gpios = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "default-off";
};
5ghz-1 {
label = "bcm53xx:white:5ghz-1";
gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "default-off";
};
2ghz {
label = "bcm53xx:white:2ghz";
gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "default-off";
};
wireless {
label = "bcm53xx:white:wireless";
gpios = <&chipcommon 14 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "default-off";
};
wps {
label = "bcm53xx:white:wps";
gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "default-off";
};
5ghz-2 {
label = "bcm53xx:white:5ghz-2";
gpios = <&chipcommon 16 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "default-off";
};
usb3 {
label = "bcm53xx:white:usb3";
gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "default-off";
};
usb2 {
label = "bcm53xx:white:usb2";
gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "default-off";
};
};
--- a/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
+++ b/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
@@ -26,49 +26,41 @@
lan {
label = "bcm53xx:blue:lan";
gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "default-off";
};
wps {
label = "bcm53xx:blue:wps";
gpios = <&chipcommon 2 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "default-off";
};
2ghz {
label = "bcm53xx:blue:2ghz";
gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "default-off";
};
5ghz {
label = "bcm53xx:blue:5ghz";
gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "default-off";
};
usb3 {
label = "bcm53xx:blue:usb3";
gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "default-off";
};
usb2 {
label = "bcm53xx:blue:usb2";
gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "default-off";
};
wan-blue {
label = "bcm53xx:blue:wan";
gpios = <&chipcommon 14 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "default-off";
};
wan-amber {
label = "bcm53xx:amber:wan";
gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "default-off";
};
power {
--- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
+++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
@@ -56,37 +56,31 @@
wan-white {
label = "bcm53xx:white:wan";
gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "default-off";
};
power-amber {
label = "bcm53xx:amber:power";
gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "default-off";
};
wan-amber {
label = "bcm53xx:amber:wan";
gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "default-off";
};
usb3-white {
label = "bcm53xx:white:usb3";
gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "default-off";
};
2ghz {
label = "bcm53xx:white:2ghz";
gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "default-off";
};
5ghz {
label = "bcm53xx:white:5ghz";
gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "default-off";
};
};
--- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
+++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
@@ -34,37 +34,31 @@
lan3 {
label = "bcm53xx:green:lan3";
gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "default-off";
};
lan4 {
label = "bcm53xx:green:lan4";
gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "default-off";
};
wan {
label = "bcm53xx:green:wan";
gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "default-off";
};
lan1 {
label = "bcm53xx:green:lan1";
gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "default-off";
};
lan2 {
label = "bcm53xx:green:lan2";
gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "default-off";
};
usb3 {
label = "bcm53xx:green:usb3";
gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "default-off";
};
status {
@@ -76,13 +70,11 @@
2ghz {
label = "bcm53xx:green:2ghz";
gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "default-off";
};
5ghz {
label = "bcm53xx:green:5ghz";
gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "default-off";
};
};
--- a/arch/arm/boot/dts/bcm47094-netgear-r8500.dts
+++ b/arch/arm/boot/dts/bcm47094-netgear-r8500.dts
@@ -34,37 +34,31 @@
power1 {
label = "bcm53xx:amber:power";
gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "default-off";
};
5ghz-1 {
label = "bcm53xx:white:5ghz-1";
gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "default-off";
};
5ghz-2 {
label = "bcm53xx:white:5ghz-2";
gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "default-off";
};
2ghz {
label = "bcm53xx:white:2ghz";
gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "default-off";
};
usb2 {
label = "bcm53xx:white:usb2";
gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "default-off";
};
usb3 {
label = "bcm53xx:white:usb3";
gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "default-off";
};
};

40
target/linux/bcm53xx/patches-4.4/047-0014-ARM-dts-BCM5301X-Add-TWD-WD-Support-to-DT.patch
View File

@ -1,40 +0,0 @@
From f22c635e585471d01a38b829c0753c1467b5058e Mon Sep 17 00:00:00 2001
From: Jon Mason <jonmason@broadcom.com>
Date: Mon, 6 Mar 2017 11:24:44 -0500
Subject: [PATCH] ARM: dts: BCM5301X: Add TWD WD Support to DT
Add support for the ARM TWD Watchdog to the bcm5301x device tree. The
ARM TWD timer allocated the register space for the WDT, so this patch
necessitated shrinking that. Also, the GIC masks were added for these.
Signed-off-by: Jon Mason <jonmason@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
arch/arm/boot/dts/bcm5301x.dtsi | 15 ++++++++++++---
1 file changed, 12 insertions(+), 3 deletions(-)
--- a/arch/arm/boot/dts/bcm5301x.dtsi
+++ b/arch/arm/boot/dts/bcm5301x.dtsi
@@ -70,10 +70,19 @@
clocks = <&periph_clk>;
};
- local-timer@20600 {
+ timer@20600 {
compatible = "arm,cortex-a9-twd-timer";
- reg = <0x20600 0x100>;
- interrupts = <GIC_PPI 13 IRQ_TYPE_EDGE_RISING>;
+ reg = <0x20600 0x20>;
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) |
+ IRQ_TYPE_EDGE_RISING)>;
+ clocks = <&periph_clk>;
+ };
+
+ watchdog@20620 {
+ compatible = "arm,cortex-a9-twd-wdt";
+ reg = <0x20620 0x20>;
+ interrupts = <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) |
+ IRQ_TYPE_EDGE_RISING)>;
clocks = <&periph_clk>;
};

34
target/linux/bcm53xx/patches-4.4/047-0015-ARM-dts-BCM5301X-Add-I2C-support-to-the-DT.patch
View File

@ -1,34 +0,0 @@
From bb097e3e00457bd69ad3a767f6b99424e2e06411 Mon Sep 17 00:00:00 2001
From: Jon Mason <jonmason@broadcom.com>
Date: Mon, 6 Mar 2017 11:24:45 -0500
Subject: [PATCH] ARM: dts: BCM5301X: Add I2C support to the DT
Add I2C support to the bcm5301x Device Tree. Since no driver changes
are needed to enable this hardware, only the device tree changes are
required to make this functional.
Signed-off-by: Jon Mason <jonmason@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
arch/arm/boot/dts/bcm5301x.dtsi | 10 ++++++++++
1 file changed, 10 insertions(+)
--- a/arch/arm/boot/dts/bcm5301x.dtsi
+++ b/arch/arm/boot/dts/bcm5301x.dtsi
@@ -338,6 +338,16 @@
};
};
+ i2c0: i2c@18009000 {
+ compatible = "brcm,iproc-i2c";
+ reg = <0x18009000 0x50>;
+ interrupts = <GIC_SPI 121 IRQ_TYPE_NONE>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-frequency = <100000>;
+ status = "disabled";
+ };
+
lcpll0: lcpll0@1800c100 {
#clock-cells = <1>;
compatible = "brcm,nsp-lcpll0";

130
target/linux/bcm53xx/patches-4.4/047-0016-ARM-dts-BCM5301X-Add-support-for-TP-LINK-Archer-C5-V.patch
View File

@ -1,130 +0,0 @@
From d6661da842bbeec2082b7263c9e682792e7951a9 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
Date: Tue, 14 Mar 2017 11:39:41 +0100
Subject: [PATCH] ARM: dts: BCM5301X: Add support for TP-LINK Archer C5 V2
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
This is BCM47081A0 based home router with BCM43217 and BCM4352 wireless
chipsets.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts | 98 ++++++++++++++++++++++
2 files changed, 99 insertions(+)
create mode 100644 arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -76,6 +76,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
bcm47081-buffalo-wzr-900dhp.dtb \
bcm47081-luxul-xap-1410.dtb \
bcm47081-luxul-xwr-1200.dtb \
+ bcm47081-tplink-archer-c5-v2.dtb \
bcm4709-asus-rt-ac87u.dtb \
bcm4709-buffalo-wxr-1900dhp.dtb \
bcm4709-linksys-ea9200.dtb \
--- /dev/null
+++ b/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts
@@ -0,0 +1,98 @@
+/*
+ * Copyright (C) 2017 Rafał Miłecki <rafal@milecki.pl>
+ *
+ * Licensed under the ISC license.
+ */
+
+/dts-v1/;
+
+#include "bcm47081.dtsi"
+
+/ {
+ compatible = "tplink,archer-c5-v2", "brcm,bcm47081", "brcm,bcm4708";
+ model = "TP-LINK Archer C5 V2";
+
+ chosen {
+ bootargs = "earlycon";
+ };
+
+ memory {
+ reg = <0x00000000 0x08000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ 2ghz {
+ label = "bcm53xx:green:2ghz";
+ gpios = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
+ };
+
+ lan {
+ label = "bcm53xx:green:lan";
+ gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>;
+ };
+
+ usb2-port1 {
+ label = "bcm53xx:green:usb2-port1";
+ gpios = <&chipcommon 2 GPIO_ACTIVE_HIGH>;
+ };
+
+ power {
+ label = "bcm53xx:green:power";
+ gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "default-on";
+ };
+
+ wan-green {
+ label = "bcm53xx:green:wan";
+ gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
+ };
+
+ wps {
+ label = "bcm53xx:green:wps";
+ gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>;
+ };
+
+ wan-amber {
+ label = "bcm53xx:amber:wan";
+ gpios = <&chipcommon 8 GPIO_ACTIVE_HIGH>;
+ };
+
+ 5ghz {
+ label = "bcm53xx:green:5ghz";
+ gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
+ };
+
+ usb2-port2 {
+ label = "bcm53xx:green:usb2-port2";
+ gpios = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ rfkill {
+ label = "WiFi";
+ linux,code = <KEY_RFKILL>;
+ gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+ };
+
+ restart {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&spi_nor {
+ status = "okay";
+};
+
+&usb2 {
+ vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
+};

27
target/linux/bcm53xx/patches-4.4/047-0017-ARM-dts-BCM953012HR-Add-ethernet-aliases.patch
View File

@ -1,27 +0,0 @@
From a7996761d1dacbac10c892c16faa90dfe46affcd Mon Sep 17 00:00:00 2001
From: Steve Lin <steven.lin1@broadcom.com>
Date: Wed, 15 Mar 2017 16:59:35 -0400
Subject: [PATCH] ARM: dts: BCM953012HR: Add ethernet aliases
Adding ethernet aliases. These are used, for example, by bootloaders,
to modify the MAC addresses in the device tree.
Signed-off-by: Steve Lin <steven.lin1@broadcom.com>
Acked-by: Jon Mason <jon.mason@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
arch/arm/boot/dts/bcm953012hr.dts | 3 +++
1 file changed, 3 insertions(+)
--- a/arch/arm/boot/dts/bcm953012hr.dts
+++ b/arch/arm/boot/dts/bcm953012hr.dts
@@ -41,6 +41,9 @@
aliases {
serial0 = &uart0;
+ ethernet0 = &gmac0;
+ ethernet1 = &gmac1;
+ ethernet2 = &gmac2;
};
chosen {

161
target/linux/bcm53xx/patches-4.4/047-0018-ARM-dts-BCM5301X-Specify-serial-console-params-in-dt.patch
View File

@ -1,161 +0,0 @@
From 5be82d0475941dc96eeeee3c754baf48365f7bf5 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
Date: Wed, 15 Mar 2017 18:03:27 +0100
Subject: [PATCH] ARM: dts: BCM5301X: Specify serial console params in dtsi
files
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
So far every Northstar device we have seen was using the same serial
console params (115200n8). It probably make the most sense to put it in
some proper dtsi files instead of repeating over and over for every
single device. As different boards may use different bootloaders it
seems the safest idea is to use board specific dtsi files.
Just in case some vendor decides to use different UART (parameters) this
can be always easily overwritten.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
arch/arm/boot/dts/bcm4708.dtsi | 8 ++++++++
arch/arm/boot/dts/bcm47081.dtsi | 8 ++++++++
arch/arm/boot/dts/bcm5301x.dtsi | 4 ----
arch/arm/boot/dts/bcm94708.dts | 8 --------
arch/arm/boot/dts/bcm94709.dts | 8 --------
arch/arm/boot/dts/bcm953012er.dts | 8 --------
arch/arm/boot/dts/bcm953012hr.dts | 5 -----
arch/arm/boot/dts/bcm953012k.dts | 4 ----
8 files changed, 16 insertions(+), 37 deletions(-)
--- a/arch/arm/boot/dts/bcm4708.dtsi
+++ b/arch/arm/boot/dts/bcm4708.dtsi
@@ -12,6 +12,14 @@
/ {
compatible = "brcm,bcm4708";
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
--- a/arch/arm/boot/dts/bcm47081.dtsi
+++ b/arch/arm/boot/dts/bcm47081.dtsi
@@ -22,6 +22,14 @@
/ {
compatible = "brcm,bcm47081";
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
--- a/arch/arm/boot/dts/bcm5301x.dtsi
+++ b/arch/arm/boot/dts/bcm5301x.dtsi
@@ -18,10 +18,6 @@
/ {
interrupt-parent = <&gic>;
- chosen {
- stdout-path = &uart0;
- };
-
chipcommonA {
compatible = "simple-bus";
ranges = <0x00000000 0x18000000 0x00001000>;
--- a/arch/arm/boot/dts/bcm94708.dts
+++ b/arch/arm/boot/dts/bcm94708.dts
@@ -38,14 +38,6 @@
model = "NorthStar SVK (BCM94708)";
compatible = "brcm,bcm94708", "brcm,bcm4708";
- aliases {
- serial0 = &uart0;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
memory {
reg = <0x00000000 0x08000000>;
};
--- a/arch/arm/boot/dts/bcm94709.dts
+++ b/arch/arm/boot/dts/bcm94709.dts
@@ -38,14 +38,6 @@
model = "NorthStar SVK (BCM94709)";
compatible = "brcm,bcm94709", "brcm,bcm4709", "brcm,bcm4708";
- aliases {
- serial0 = &uart0;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
memory {
reg = <0x00000000 0x08000000>;
};
--- a/arch/arm/boot/dts/bcm953012er.dts
+++ b/arch/arm/boot/dts/bcm953012er.dts
@@ -39,14 +39,6 @@
model = "NorthStar Enterprise Router (BCM953012ER)";
compatible = "brcm,bcm953012er", "brcm,brcm53012", "brcm,bcm4708";
- aliases {
- serial0 = &uart0;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
memory {
reg = <0x00000000 0x8000000>;
};
--- a/arch/arm/boot/dts/bcm953012hr.dts
+++ b/arch/arm/boot/dts/bcm953012hr.dts
@@ -40,16 +40,11 @@
compatible = "brcm,bcm953012hr", "brcm,brcm53012", "brcm,bcm4708";
aliases {
- serial0 = &uart0;
ethernet0 = &gmac0;
ethernet1 = &gmac1;
ethernet2 = &gmac2;
};
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
memory@80000000 {
reg = <0x80000000 0x10000000>;
};
--- a/arch/arm/boot/dts/bcm953012k.dts
+++ b/arch/arm/boot/dts/bcm953012k.dts
@@ -43,10 +43,6 @@
serial1 = &uart1;
};
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
memory {
reg = <0x00000000 0x10000000>;
};

33
target/linux/bcm53xx/patches-4.4/047-0019-ARM-dts-BCM53573-Specify-serial-console-parameters.patch
View File

@ -1,33 +0,0 @@
From 3a599e0dbc03ffc51568cf3376633d127451632d Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
Date: Wed, 15 Mar 2017 18:03:28 +0100
Subject: [PATCH] ARM: dts: BCM53573: Specify serial console parameters
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
This adds baud rate, parity & number of data bits. It's required to get
serial working correctly.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
arch/arm/boot/dts/bcm53573.dtsi | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
--- a/arch/arm/boot/dts/bcm53573.dtsi
+++ b/arch/arm/boot/dts/bcm53573.dtsi
@@ -13,8 +13,12 @@
/ {
interrupt-parent = <&gic>;
+ aliases {
+ serial0 = &uart0;
+ };
+
chosen {
- stdout-path = &uart0;
+ stdout-path = "serial0:115200n8";
};
cpus {

59
target/linux/bcm53xx/patches-4.4/047-0020-ARM-dts-BCM5301X-Add-CPU-thermal-sensor-and-zone.patch
View File

@ -1,59 +0,0 @@
From e55d2c7272ff647efac4aecd895b20ee66e43519 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
Date: Fri, 14 Apr 2017 23:42:28 +0200
Subject: [PATCH] ARM: dts: BCM5301X: Add CPU thermal sensor and zone
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
This uses CPU thermal sensor available on every Northstar chipset to
monitor temperature. We don't have any cooling or throttling so only a
critical trip was added.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: Jon Mason <jon.mason@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
arch/arm/boot/dts/bcm5301x.dtsi | 26 ++++++++++++++++++++++++++
1 file changed, 26 insertions(+)
--- a/arch/arm/boot/dts/bcm5301x.dtsi
+++ b/arch/arm/boot/dts/bcm5301x.dtsi
@@ -363,6 +363,12 @@
"sata2";
};
+ thermal: thermal@1800c2c0 {
+ compatible = "brcm,ns-thermal";
+ reg = <0x1800c2c0 0x10>;
+ #thermal-sensor-cells = <0>;
+ };
+
srab: srab@18007000 {
compatible = "brcm,bcm5301x-srab";
reg = <0x18007000 0x1000>;
@@ -390,4 +396,24 @@
brcm,nand-has-wp;
};
+
+ thermal-zones {
+ cpu_thermal: cpu-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <1000>;
+ coefficients = <(-556) 418000>;
+ thermal-sensors = <&thermal>;
+
+ trips {
+ cpu-crit {
+ temperature = <125000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ };
+ };
+ };
};

34
target/linux/bcm53xx/patches-4.4/047-0021-ARM-dts-BCM5301X-Specify-MDIO-bus-in-the-DT.patch
View File

@ -1,34 +0,0 @@
From c4b88e77c28fad5151a1a4eac516b947e2d51be5 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
Date: Wed, 19 Apr 2017 23:54:25 +0200
Subject: [PATCH] ARM: dts: BCM5301X: Specify MDIO bus in the DT
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Northstar devices have MDIO bus that may contain various PHYs attached.
A common example is USB 3.0 PHY (that doesn't have an MDIO driver yet).
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
arch/arm/boot/dts/bcm5301x.dtsi | 8 ++++++++
1 file changed, 8 insertions(+)
--- a/arch/arm/boot/dts/bcm5301x.dtsi
+++ b/arch/arm/boot/dts/bcm5301x.dtsi
@@ -334,6 +334,14 @@
};
};
+ mdio: mdio@18003000 {
+ compatible = "brcm,iproc-mdio";
+ reg = <0x18003000 0x8>;
+ #size-cells = <1>;
+ #address-cells = <0>;
+ status = "disabled";
+ };
+
i2c0: i2c@18009000 {
compatible = "brcm,iproc-i2c";
reg = <0x18009000 0x50>;

74
target/linux/bcm53xx/patches-4.4/049-v4.14-0001-ARM-dts-BCM5301X-Specify-USB-ports-for-each-controll.patch
View File

@ -1,74 +0,0 @@
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
Date: Tue, 27 Jun 2017 19:35:27 +0200
Subject: [PATCH] ARM: dts: BCM5301X: Specify USB ports for each controller
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Northstar has 3 controllers: OHCI and EHCI (each with 2 ports) and XHCI
(with just 1 port). Describe them in the DT. In future this will allow
to reference them as trigger sources.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
arch/arm/boot/dts/bcm5301x.dtsi | 34 ++++++++++++++++++++++++++++++++++
1 file changed, 34 insertions(+)
--- a/arch/arm/boot/dts/bcm5301x.dtsi
+++ b/arch/arm/boot/dts/bcm5301x.dtsi
@@ -272,6 +272,19 @@
reg = <0x00021000 0x1000>;
interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
phys = <&usb2_phy>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ehci_port1: port@1 {
+ reg = <1>;
+ #trigger-source-cells = <0>;
+ };
+
+ ehci_port2: port@2 {
+ reg = <2>;
+ #trigger-source-cells = <0>;
+ };
};
ohci: ohci@22000 {
@@ -280,6 +293,19 @@
compatible = "generic-ohci";
reg = <0x00022000 0x1000>;
interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ohci_port1: port@1 {
+ reg = <1>;
+ #trigger-source-cells = <0>;
+ };
+
+ ohci_port2: port@2 {
+ reg = <2>;
+ #trigger-source-cells = <0>;
+ };
};
};
@@ -300,6 +326,14 @@
interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
phys = <&usb3_phy>;
phy-names = "usb";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ xhci_port1: port@1 {
+ reg = <1>;
+ #trigger-source-cells = <0>;
+ };
};
};

139
target/linux/bcm53xx/patches-4.4/049-v4.14-0002-ARM-dts-BCM5301X-Specify-USB-ports-for-USB-LEDs-of-f.patch
View File

@ -1,139 +0,0 @@
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
Date: Wed, 2 Aug 2017 06:40:41 +0200
Subject: [PATCH] ARM: dts: BCM5301X: Specify USB ports for USB LEDs of few
devices
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
This uses trigger-sources documented in commit 80dc6e1cd85fc ("dt-bindings:
leds: document new trigger-sources property") to specify USB ports. Such an
information can be used by operating system to setup LEDs behavior.
I updated dts files for 7 devices I own and I was able to test.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts | 4 ++++
arch/arm/boot/dts/bcm4708-netgear-r6250.dts | 3 +++
arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts | 6 ++++++
arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts | 4 ++++
arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts | 5 +++++
arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts | 3 +++
arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts | 3 +++
7 files changed, 28 insertions(+)
--- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
+++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
@@ -52,6 +52,10 @@
usb {
label = "bcm53xx:blue:usb";
gpios = <&hc595 0 GPIO_ACTIVE_HIGH>;
+ trigger-sources = <&ohci_port1>, <&ehci_port1>,
+ <&xhci_port1>, <&ohci_port2>,
+ <&ehci_port2>;
+ linux,default-trigger = "usbport";
};
power0 {
--- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
+++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
@@ -48,6 +48,9 @@
usb {
label = "bcm53xx:blue:usb";
gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
+ trigger-sources = <&ohci_port1>, <&ehci_port1>,
+ <&xhci_port1>;
+ linux,default-trigger = "usbport";
};
wireless {
--- a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
+++ b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
@@ -42,16 +42,22 @@
usb2 {
label = "bcm53xx:white:usb2";
gpios = <&chipcommon 3 GPIO_ACTIVE_HIGH>;
+ trigger-sources = <&ohci_port2>, <&ehci_port2>;
+ linux,default-trigger = "usbport";
};
usb3-white {
label = "bcm53xx:white:usb3";
gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
+ trigger-sources = <&xhci_port1>;
+ linux,default-trigger = "usbport";
};
usb3-green {
label = "bcm53xx:green:usb3";
gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
+ trigger-sources = <&ohci_port1>, <&ehci_port1>;
+ linux,default-trigger = "usbport";
};
wps {
--- a/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts
+++ b/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts
@@ -36,6 +36,8 @@
usb2-port1 {
label = "bcm53xx:green:usb2-port1";
gpios = <&chipcommon 2 GPIO_ACTIVE_HIGH>;
+ trigger-sources = <&ohci_port1>, <&ehci_port1>;
+ linux,default-trigger = "usbport";
};
power {
@@ -67,6 +69,8 @@
usb2-port2 {
label = "bcm53xx:green:usb2-port2";
gpios = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
+ trigger-sources = <&ohci_port2>, <&ehci_port2>;
+ linux,default-trigger = "usbport";
};
};
--- a/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
+++ b/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
@@ -46,11 +46,16 @@
usb3 {
label = "bcm53xx:blue:usb3";
gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>;
+ trigger-sources = <&ohci_port1>, <&ehci_port1>,
+ <&xhci_port1>;
+ linux,default-trigger = "usbport";
};
usb2 {
label = "bcm53xx:blue:usb2";
gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>;
+ trigger-sources = <&ohci_port2>, <&ehci_port2>;
+ linux,default-trigger = "usbport";
};
wan-blue {
--- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
+++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
@@ -71,6 +71,9 @@
usb3-white {
label = "bcm53xx:white:usb3";
gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
+ trigger-sources = <&ohci_port1>, <&ehci_port1>,
+ <&xhci_port1>;
+ linux,default-trigger = "usbport";
};
2ghz {
--- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
+++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
@@ -59,6 +59,9 @@
usb3 {
label = "bcm53xx:green:usb3";
gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
+ trigger-sources = <&ohci_port1>, <&ehci_port1>,
+ <&xhci_port1>;
+ linux,default-trigger = "usbport";
};
status {

135
target/linux/bcm53xx/patches-4.4/049-v4.14-0003-ARM-dts-BCM53573-Add-Broadcom-BCM947189ACDBMR-board-.patch
View File

@ -1,135 +0,0 @@
From 092ccf0415c720a1e9458a46fe75f77574027a55 Mon Sep 17 00:00:00 2001
From: Florian Fainelli <f.fainelli@gmail.com>
Date: Tue, 18 Jul 2017 12:37:37 -0700
Subject: [PATCH] ARM: dts: BCM53573: Add Broadcom BCM947189ACDBMR board
support
Adds support for the Broadcom reference board BCM947189ACDMBR which
features the following:
* 128MB of DRAM
* External MoCA support through a Broadcom BCM6802 chip
* 1x external Gigabit PHY through the external BCM6802
* 1x USB 2.0 port
* 1x PCIE slot
* Few configurable buttons and LEDs
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
arch/arm/boot/dts/Makefile | 3 +-
arch/arm/boot/dts/bcm947189acdbmr.dts | 97 +++++++++++++++++++++++++++++++++++
2 files changed, 99 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/boot/dts/bcm947189acdbmr.dts
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -93,7 +93,8 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
bcm953012hr.dtb \
bcm953012k.dtb
dtb-$(CONFIG_ARCH_BCM_53573) += \
- bcm47189-tenda-ac9.dtb
+ bcm47189-tenda-ac9.dtb \
+ bcm947189acdbmr.dtb
dtb-$(CONFIG_ARCH_BCM_63XX) += \
bcm963138dvt.dtb
dtb-$(CONFIG_ARCH_BCM_CYGNUS) += \
--- /dev/null
+++ b/arch/arm/boot/dts/bcm947189acdbmr.dts
@@ -0,0 +1,97 @@
+/*
+ * Copyright (C) 2017 Broadcom
+ * Author: Florian Fainelli <f.fainelli@gmail.com>
+ *
+ * Licensed under the ISC license.
+ */
+
+/dts-v1/;
+
+#include "bcm53573.dtsi"
+
+/ {
+ compatible = "brcm,bcm947189acdbmr", "brcm,bcm47189", "brcm,bcm53573";
+ model = "Broadcom BCM947189ACDBMR";
+
+ chosen {
+ bootargs = "console=ttyS0,115200 earlycon";
+ };
+
+ memory {
+ reg = <0x00000000 0x08000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ wps {
+ label = "bcm53xx:blue:wps";
+ gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>;
+ };
+
+ 5ghz {
+ label = "bcm53xx:blue:5ghz";
+ gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>;
+ };
+
+ 2ghz {
+ label = "bcm53xx:blue:2ghz";
+ gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ restart {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>;
+ };
+
+ wps {
+ label = "WPS";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&chipcommon 9 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ spi {
+ compatible = "spi-gpio";
+ num-chipselects = <1>;
+ gpio-sck = <&chipcommon 21 0>;
+ gpio-miso = <&chipcommon 22 0>;
+ gpio-mosi = <&chipcommon 23 0>;
+ cs-gpios = <&chipcommon 24 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* External BCM6802 MoCA chip is connected */
+ };
+};
+
+&pcie0 {
+ ranges = <0x00000000 0 0 0 0 0x00100000>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ bridge@0,0,0 {
+ reg = <0x0000 0 0 0 0>;
+ ranges = <0x00000000 0 0 0 0 0 0 0x00100000>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ wifi@0,1,0 {
+ reg = <0x0000 0 0 0 0>;
+ ranges = <0x00000000 0 0 0 0x00100000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+ };
+};
+
+&usb2 {
+ vcc-gpio = <&chipcommon 8 GPIO_ACTIVE_HIGH>;
+};

58
target/linux/bcm53xx/patches-4.4/049-v4.14-0004-ARM-BCM53573-Specify-ports-for-USB-LED-for-Tenda-AC9.patch
View File

@ -1,58 +0,0 @@
From 0173b2cd6948b5b96ac4e8dbc3bcb4dd0b45c296 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
Date: Thu, 17 Aug 2017 11:05:14 +0200
Subject: [PATCH] ARM: BCM53573: Specify ports for USB LED for Tenda AC9
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
This uses trigger-sources documented in commit 80dc6e1cd85fc ("dt-bindings:
leds: document new trigger-sources property") to specify USB ports. Such an
information can be used by operating system to setup LEDs behavior.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
arch/arm/boot/dts/bcm47189-tenda-ac9.dts | 2 ++
arch/arm/boot/dts/bcm53573.dtsi | 4 ++++
2 files changed, 6 insertions(+)
--- a/arch/arm/boot/dts/bcm47189-tenda-ac9.dts
+++ b/arch/arm/boot/dts/bcm47189-tenda-ac9.dts
@@ -26,6 +26,8 @@
usb {
label = "bcm53xx:blue:usb";
gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>;
+ trigger-sources = <&ohci_port1>, <&ehci_port1>;
+ linux,default-trigger = "usbport";
};
wps {
--- a/arch/arm/boot/dts/bcm53573.dtsi
+++ b/arch/arm/boot/dts/bcm53573.dtsi
@@ -138,10 +138,12 @@
ehci_port1: port@1 {
reg = <1>;
+ #trigger-source-cells = <0>;
};
ehci_port2: port@2 {
reg = <2>;
+ #trigger-source-cells = <0>;
};
};
@@ -158,10 +160,12 @@
ohci_port1: port@1 {
reg = <1>;
+ #trigger-source-cells = <0>;
};
ohci_port2: port@2 {
reg = <2>;
+ #trigger-source-cells = <0>;
};
};
};

30
target/linux/bcm53xx/patches-4.4/049-v4.15-0001-ARM-dts-BCM5301X-Specify-USB-ports-for-USB-LED-of-Lu.patch
View File

@ -1,30 +0,0 @@
From 2460266f21f140936e627f28f28d1a4f30887ae9 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
Date: Fri, 6 Oct 2017 10:52:35 +0200
Subject: [PATCH] ARM: dts: BCM5301X: Specify USB ports for USB LED of Luxul
XWR-1200
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
This info can be used by operating system to setup LED behavior.
Reported-by: Dan Haab <dhaab@luxul.com>
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts
+++ b/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts
@@ -57,7 +57,8 @@
usb {
label = "bcm53xx:green:usb";
gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "none";
+ trigger-sources = <&ohci_port2>, <&ehci_port2>;
+ linux,default-trigger = "usbport";
};
status {

96
target/linux/bcm53xx/patches-4.4/049-v4.15-0002-ARM-dts-BCM5301X-Add-DT-for-Luxul-XBR-4500.patch
View File

@ -1,96 +0,0 @@
From 1f4b0d5596d2e3ea8e953d578ab8444ce860d35d Mon Sep 17 00:00:00 2001
From: Dan Haab <dhaab@luxul.com>
Date: Mon, 9 Oct 2017 09:46:22 -0600
Subject: [PATCH] ARM: dts: BCM5301X: Add DT for Luxul XBR-4500
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
This is BCM47094 (AKA BCM4709C0) based router with ports-on-the-front
board design.
Signed-off-by: Dan Haab <dhaab@luxul.com>
Acked-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts | 63 +++++++++++++++++++++++++++
2 files changed, 64 insertions(+)
create mode 100644 arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -85,6 +85,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
bcm4709-tplink-archer-c9-v1.dtb \
bcm47094-dlink-dir-885l.dtb \
bcm47094-linksys-panamera.dtb \
+ bcm47094-luxul-xbr-4500.dtb \
bcm47094-luxul-xwr-3100.dtb \
bcm47094-netgear-r8500.dtb \
bcm94708.dtb \
--- /dev/null
+++ b/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts
@@ -0,0 +1,63 @@
+/*
+ * Copyright (C) 2017 Luxul Inc.
+ *
+ * Licensed under the ISC license.
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
+ compatible = "luxul,xbr-4500-v1", "brcm,bcm47094", "brcm,bcm4708";
+ model = "Luxul XBR-4500 V1";
+
+ chosen {
+ bootargs = "earlycon";
+ };
+
+ memory {
+ reg = <0x00000000 0x08000000
+ 0x88000000 0x18000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ status {
+ label = "bcm53xx:green:status";
+ gpios = <&chipcommon 20 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "timer";
+ };
+
+ usb3 {
+ label = "bcm53xx:green:usb3";
+ gpios = <&chipcommon 19 GPIO_ACTIVE_HIGH>;
+ trigger-sources = <&ohci_port1>, <&ehci_port1>,
+ <&xhci_port1>;
+ linux,default-trigger = "usbport";
+ };
+
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ restart {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&usb3 {
+ vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
+};
+
+&spi_nor {
+ status = "okay";
+};

96
target/linux/bcm53xx/patches-4.4/049-v4.15-0003-ARM-dts-BCM5301X-Add-DT-for-Luxul-ABR-4500.patch
View File

@ -1,96 +0,0 @@
From 65f78c4c41a9b9a7637e1dda2d5e41cf26ea971c Mon Sep 17 00:00:00 2001
From: Dan Haab <dhaab@luxul.com>
Date: Mon, 9 Oct 2017 09:46:23 -0600
Subject: [PATCH] ARM: dts: BCM5301X: Add DT for Luxul ABR-4500
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
This is BCM47094 (AKA BCM4709C0) based router with rear-facing ports
board design.
Signed-off-by: Dan Haab <dhaab@luxul.com>
Acked-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts | 63 +++++++++++++++++++++++++++
2 files changed, 64 insertions(+)
create mode 100644 arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -85,6 +85,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
bcm4709-tplink-archer-c9-v1.dtb \
bcm47094-dlink-dir-885l.dtb \
bcm47094-linksys-panamera.dtb \
+ bcm47094-luxul-abr-4500.dtb \
bcm47094-luxul-xbr-4500.dtb \
bcm47094-luxul-xwr-3100.dtb \
bcm47094-netgear-r8500.dtb \
--- /dev/null
+++ b/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts
@@ -0,0 +1,63 @@
+/*
+ * Copyright (C) 2017 Luxul Inc.
+ *
+ * Licensed under the ISC license.
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
+ compatible = "luxul,abr-4500-v1", "brcm,bcm47094", "brcm,bcm4708";
+ model = "Luxul ABR-4500 V1";
+
+ chosen {
+ bootargs = "earlycon";
+ };
+
+ memory {
+ reg = <0x00000000 0x08000000
+ 0x88000000 0x18000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ status {
+ label = "bcm53xx:green:status";
+ gpios = <&chipcommon 20 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "timer";
+ };
+
+ usb3 {
+ label = "bcm53xx:green:usb3";
+ gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>;
+ trigger-sources = <&ohci_port1>, <&ehci_port1>,
+ <&xhci_port1>;
+ linux,default-trigger = "usbport";
+ };
+
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ restart {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&usb3 {
+ vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
+};
+
+&spi_nor {
+ status = "okay";
+};

120
target/linux/bcm53xx/patches-4.4/049-v4.15-0004-ARM-dts-BCM53573-Add-DT-for-Luxul-XAP-810.patch
View File

@ -1,120 +0,0 @@
From 0aa052ce1c3340850a7e5980b6d24b3ea5779591 Mon Sep 17 00:00:00 2001
From: Dan Haab <dhaab@luxul.com>
Date: Mon, 9 Oct 2017 09:46:59 -0600
Subject: [PATCH] ARM: dts: BCM53573: Add DT for Luxul XAP-810
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
This is BCM53573 WiSoC based access point with an extra BCM43217 chipset
used for 2.4 GHz.
Signed-off-by: Dan Haab <dhaab@luxul.com>
Acked-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/bcm47189-luxul-xap-810.dts | 87 ++++++++++++++++++++++++++++
2 files changed, 88 insertions(+)
create mode 100644 arch/arm/boot/dts/bcm47189-luxul-xap-810.dts
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -95,6 +95,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
bcm953012hr.dtb \
bcm953012k.dtb
dtb-$(CONFIG_ARCH_BCM_53573) += \
+ bcm47189-luxul-xap-810.dtb \
bcm47189-tenda-ac9.dtb \
bcm947189acdbmr.dtb
dtb-$(CONFIG_ARCH_BCM_63XX) += \
--- /dev/null
+++ b/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts
@@ -0,0 +1,87 @@
+/*
+ * Copyright 2017 Luxul Inc.
+ *
+ * Licensed under the ISC license.
+ */
+
+/dts-v1/;
+
+#include "bcm53573.dtsi"
+
+/ {
+ compatible = "luxul,xap-810-v1", "brcm,bcm47189", "brcm,bcm53573";
+ model = "Luxul XAP-810 V1";
+
+ chosen {
+ bootargs = "earlycon";
+ };
+
+ memory {
+ reg = <0x00000000 0x08000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ 5ghz {
+ label = "bcm53xx:blue:5ghz";
+ gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "default-off";
+ };
+
+ system {
+ label = "bcm53xx:green:system";
+ gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "timer";
+ };
+ };
+
+ pcie0_leds {
+ compatible = "gpio-leds";
+
+ 2ghz {
+ label = "bcm53xx:blue:2ghz";
+ gpios = <&pcie0_chipcommon 3 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "default-off";
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ restart {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&pcie0 {
+ ranges = <0x00000000 0 0 0 0 0x00100000>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ bridge@0,0,0 {
+ reg = <0x0000 0 0 0 0>;
+ ranges = <0x00000000 0 0 0 0 0 0 0x00100000>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ wifi@0,1,0 {
+ reg = <0x0000 0 0 0 0>;
+ ranges = <0x00000000 0 0 0 0x00100000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ pcie0_chipcommon: chipcommon@0 {
+ reg = <0 0x1000>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+ };
+ };
+};

83
target/linux/bcm53xx/patches-4.4/049-v4.15-0005-ARM-dts-BCM53573-Add-DT-for-Luxul-XAP-1440.patch
View File

@ -1,83 +0,0 @@
From 7030ea600d560026b91726f2eb79c856b813afa9 Mon Sep 17 00:00:00 2001
From: Dan Haab <dhaab@luxul.com>
Date: Mon, 9 Oct 2017 09:47:00 -0600
Subject: [PATCH] ARM: dts: BCM53573: Add DT for Luxul XAP-1440
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
This is BCM53573 WiSoC based outdoor access point with an extra BCM43217
chipset used for 2.4 GHz.
Signed-off-by: Dan Haab <dhaab@luxul.com>
Acked-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts | 50 +++++++++++++++++++++++++++
2 files changed, 51 insertions(+)
create mode 100644 arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -95,6 +95,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
bcm953012hr.dtb \
bcm953012k.dtb
dtb-$(CONFIG_ARCH_BCM_53573) += \
+ bcm47189-luxul-xap-1440.dtb \
bcm47189-luxul-xap-810.dtb \
bcm47189-tenda-ac9.dtb \
bcm947189acdbmr.dtb
--- /dev/null
+++ b/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts
@@ -0,0 +1,50 @@
+/*
+ * Copyright 2017 Luxul Inc.
+ *
+ * Licensed under the ISC license.
+ */
+
+/dts-v1/;
+
+#include "bcm53573.dtsi"
+
+/ {
+ compatible = "luxul,xap-1440-v1", "brcm,bcm47189", "brcm,bcm53573";
+ model = "Luxul XAP-1440 V1";
+
+ chosen {
+ bootargs = "earlycon";
+ };
+
+ memory {
+ reg = <0x00000000 0x08000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ wlan {
+ label = "bcm53xx:blue:wlan";
+ gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "default-off";
+ };
+
+ system {
+ label = "bcm53xx:green:system";
+ gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "timer";
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ restart {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
+ };
+ };
+};

Some files were not shown because too many files have changed in this diff Show More