Nanako/DHDAXCW-Rockchip-OpenWrt
1
0
Fork 0
Code Issues Pull Requests Actions 1 Packages Projects Releases Wiki Activity

ipq40xx: add support for Linksys EA6350v3

Browse Source
This commit is contained in:
coolsnowwolf 2019-01-16 12:26:10 +08:00
parent e665a4ff0b
commit ad77be28b8
8 changed files with 305 additions and 2 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

3
package/firmware/ipq-wifi/Makefile
View File

@ -17,7 +17,7 @@ endef
# Please send a mail with your device-specific board files upstream.
# You can find instructions and examples on the linux-wireless wiki:
# <https://wireless.wiki.kernel.org/en/users/drivers/ath10k/boardfiles>
ALLWIFIBOARDS:=rt-acrh17 engenius_eap1300
ALLWIFIBOARDS:=linksys_ea6350v3 rt-acrh17 engenius_eap1300
ALLWIFIPACKAGES:=$(foreach BOARD,$(ALLWIFIBOARDS),ipq-wifi-$(BOARD))
define Package/ipq-wifi-default
@ -51,6 +51,7 @@ Don't install it for any other device!
PREV_BOARD+=ipq-wifi-$(1)
endef
$(eval $(call generate-ipq-wifi-package,linksys_ea6350v3,board-linksys_ea6350v3.bin,Linksys EA6350v3))
$(eval $(call generate-ipq-wifi-package,rt-acrh17,board-rt-acrh17.bin,ASUS RT-ACRH17/RT-AC82U/RT-AC42U))
#$(eval $(call generate-ipq-wifi-package,<devicename>,<filename>,<displayname>))
$(eval $(call generate-ipq-wifi-package,engenius_eap1300,board-engenius_eap1300.bin,EnGenius EAP1300))

BIN
package/firmware/ipq-wifi/board-linksys_ea6350v3.bin Normal file
View File

Binary file not shown.

1
target/linux/ipq40xx/base-files/etc/board.d/02_network
View File

@ -22,6 +22,7 @@ asus,rt-acrh17)
ucidef_set_interface_macaddr "lan" "$lan_mac_addr"
ucidef_set_interface_macaddr "wan" "$wan_mac_addr"
;;
linksys,ea6350v3 |\
avm,fritzbox-4040)
ucidef_add_switch "switch0" \
"0t@eth0" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan"

2
target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
View File

@ -124,6 +124,7 @@ case "$FIRMWARE" in
"ath10k/pre-cal-ahb-a000000.wifi.bin")
case "$board" in
8dev,jalapeno |\
linksys,ea6350v3 |\
glinet,gl-b1300 |\
qcom,ap-dk01.1-c1)
ath10kcal_extract "ART" 4096 12064
@ -162,6 +163,7 @@ case "$FIRMWARE" in
"ath10k/pre-cal-ahb-a800000.wifi.bin")
case "$board" in
8dev,jalapeno |\
linksys,ea6350v3 |\
glinet,gl-b1300 |\
qcom,ap-dk01.1-c1)
ath10kcal_extract "ART" 20480 12064

5
target/linux/ipq40xx/base-files/lib/upgrade/platform.sh
View File

@ -164,6 +164,7 @@ platform_do_upgrade() {
;;
asus,rt-ac1300uhp |\
asus,rt-acrh17|\
linksys,ea6350v3 |\
asus,rt-ac58u)
local magic=$(get_magic_long "$1")
CI_UBIPART="UBI_DEV"
@ -195,6 +196,10 @@ platform_do_upgrade() {
platform_nand_pre_upgrade() {
case "$(board_name)" in
linksys,ea6350v3)
CI_UBIPART="UBI_DEV"
CI_KERNPART="linux"
;;
meraki,mr33)
CI_KERNPART="part.safe"
;;

279
target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-ea6350v3.dts Normal file
View File

@ -0,0 +1,279 @@
/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*
*/
#include "qcom-ipq4019.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/soc/qcom,tcsr.h>
/ {
model = "Linksys EA6350v3";
compatible = "linksys,ea6350v3", "qcom,ipq4019";
memory {
device_type = "memory";
reg = <0x80000000 0x10000000>;
};
aliases {
led-boot = &power;
led-failsafe = &power;
led-running = &power;
led-upgrade = &power;
};
soc {
mdio@90000 {
status = "okay";
};
ess-psgmii@98000 {
status = "okay";
};
tcsr@1949000 {
compatible = "qcom,tcsr";
reg = <0x1949000 0x100>;
qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
};
tcsr@194b000 {
compatible = "qcom,tcsr";
reg = <0x194b000 0x100>;
qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
};
ess_tcsr@1953000 {
compatible = "qcom,tcsr";
reg = <0x1953000 0x1000>;
qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
};
tcsr@1957000 {
compatible = "qcom,tcsr";
reg = <0x1957000 0x100>;
qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
};
usb2@60f8800 {
status = "okay";
};
serial@78af000 {
pinctrl-0 = <&serial_pins>;
pinctrl-names = "default";
status = "okay";
};
usb3@8af8800 {
status = "okay";
};
crypto@8e3a000 {
status = "okay";
};
wifi@a000000 {
status = "okay";
qcom,ath10k-calibration-variant = "linksys-ea6350v3";
};
wifi@a800000 {
status = "okay";
qcom,ath10k-calibration-variant = "linksys-ea6350v3";
};
watchdog@b017000 {
status = "okay";
};
ess-switch@c000000 {
status = "okay";
};
edma@c080000 {
status = "okay";
};
};
gpio-keys {
compatible = "gpio-keys";
reset {
label = "reset";
gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
wps {
label = "wps";
gpios = <&tlmm 0 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
};
gpio-leds {
compatible = "gpio-leds";
power: status {
label = "rt-ac58u:blue:status";
gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
};
};
};
&cryptobam {
status = "okay";
};
&blsp_dma {
status = "okay";
};
&tlmm {
serial_pins: serial_pinmux {
mux {
pins = "gpio60", "gpio61";
function = "blsp_uart0";
bias-disable;
};
};
spi_0_pins: spi_0_pinmux {
mux {
function = "blsp_spi0";
pins = "gpio55", "gpio56", "gpio57";
drive-strength = <12>;
bias-disable;
};
mux_cs {
function = "gpio";
pins = "gpio54", "gpio59";
drive-strength = <2>;
bias-disable;
output-high;
};
};
};
&blsp1_spi1 { /* BLSP1 QUP1 */
pinctrl-0 = <&spi_0_pins>;
pinctrl-names = "default";
status = "okay";
cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>,
<&tlmm 59 GPIO_ACTIVE_HIGH>;
m25p80@0 {
#address-cells = <1>;
#size-cells = <0>;
/*
* U-boot looks for "n25q128a11" node,
* if we don't have it, it will spit out the following warning:
* "ipq: fdt fixup unable to find compatible node".
*/
compatible = "jedec,spi-nor";
reg = <0>;
linux,modalias = "m25p80", "mx25l1606e", "n25q128a11";
spi-max-frequency = <24000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition0@0 {
label = "SBL1";
reg = <0x00000000 0x00040000>;
read-only;
};
partition1@40000 {
label = "MIBIB";
reg = <0x00040000 0x00020000>;
read-only;
};
partition2@60000 {
label = "QSEE";
reg = <0x00060000 0x00060000>;
read-only;
};
partition3@c0000 {
label = "CDT";
reg = <0x000c0000 0x00010000>;
read-only;
};
partition4@d0000 {
label = "APPSBLENV";
reg = <0x000d0000 0x00010000>;
read-only;
};
partition5@e0000 {
label = "APPSBL"; /* uboot */
reg = <0x000e0000 0x00080000>;
read-only;
};
partition6@160000 {
label = "ART";
reg = <0x00160000 0x00010000>;
read-only;
};
partition7@170000 {
label = "u_env";
reg = <0x00170000 0x00020000>;
};
partition8@190000 {
label = "s_env";
reg = <0x00190000 0x00020000>;
};
partition9@1b0000 {
label = "devinfo";
reg = <0x001b0000 0x00010000>;
};
/* 0x001c0000 - 0x00200000 unused */
};
};
mt29f@1 {
status = "okay";
#address-cells = <1>;
#size-cells = <0>;
compatible = "spinand,mt29f", "w25n01gv";
reg = <1>;
spi-max-frequency = <24000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition0@0 {
label = "ubi";
reg = <0x00000000 0x08000000>;
};
};
};
};
&usb3_ss_phy {
status = "okay";
};
&usb3_hs_phy {
status = "okay";
};
&usb2_hs_phy {
status = "okay";
};

14
target/linux/ipq40xx/image/Makefile
View File

@ -230,6 +230,20 @@ define Device/qcom_ap-dk01.1-c1
endef
TARGET_DEVICES += qcom_ap-dk01.1-c1
define Device/linksys_ea6350v3
DEVICE_TITLE := Linksys EA6350v3
BOARD_NAME := ea6350v3
DEVICE_DTS := qcom-ipq4018-ea6350v3
DTB_SIZE := 65536
BLOCKSIZE := 128k
IMAGE_SIZE := 20439364
FILESYSTEMS := squashfs
IMAGES := sysupgrade.bin
$(call Device/FitImage)
DEVICE_PACKAGES := ath10k-firmware-qca4019 ipq-wifi-linksys_ea6350v3
endef
TARGET_DEVICES += linksys_ea6350v3
define Device/qcom_ap-dk04.1-c1
$(call Device/FitImage)
$(call Device/UbiFit)

3
target/linux/ipq40xx/patches-4.14/901-arm-boot-add-dts-files.patch
View File

@ -10,7 +10,7 @@ Signed-off-by: John Crispin <john@phrozen.org>
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -697,7 +697,22 @@ dtb-$(CONFIG_ARCH_QCOM) += \
@@ -697,7 +697,23 @@ dtb-$(CONFIG_ARCH_QCOM) += \
qcom-apq8074-dragonboard.dtb \
qcom-apq8084-ifc6540.dtb \
qcom-apq8084-mtp.dtb \
@ -30,6 +30,7 @@ Signed-off-by: John Crispin <john@phrozen.org>
+ qcom-ipq4028-wpj428.dtb \
+ qcom-ipq4029-gl-b1300.dtb \
+ qcom-ipq4029-mr33.dtb \
+ qcom-ipq4018-ea6350v3.dtb \
qcom-ipq8064-ap148.dtb \
qcom-msm8660-surf.dtb \
qcom-msm8960-cdp.dtb \