John Audia
fbd027c5da
kernel: bump 5.10 to 5.10.101
...
Removed upstreamed:
pending-5.10/841-USB-serial-option-add-ZTE-MF286D-modem.patch[1]
bcm27xx/950-0592-drm-vc4-Allow-DBLCLK-modes-even-if-horz-timing-is-od.patch[2]
All other patches automatically rebased.
1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.101&id=7113440a36c741efd7c76e3d70b3634100120cdb
2. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.101&id=21c890ca8eaecea06cabb92be2a53a6f26f56383
Build system: x86_64
Build-tested: bcm2711/RPi4B, mt7622/RT3200
Run-tested: bcm2711/RPi4B, mt7622/RT3200
Signed-off-by: John Audia <graysky@archlinux.us>
2022-03-02 16:21:51 +00:00
AmadeusGhost
aafe115cda
ipq806x: add support for SURF G-NAT200 ( #8810 )
...
Hardware specs:
SoC: Qualcomm IPQ8064
RAM: 1GB DDR3
SPI: 32MB S25FL256S
NAND: 512MB S34MS04G2 (unused)
Ethernet: 5x 10/100/1000 Mbps QCA8337
LED: internet, usb, sata
Button: Reset
USB: 1 x 3.0
Installation:
Interrupt U-Boot, tftpboot initramfs image,
than sysupgrade to openwrt.
Signed-off-by: AmadeusGhost <amadeus@openjmu.xyz>
2022-02-11 15:07:09 +08:00
Hugo Yuan
5efd70f89f
ipq806x: Add Norton 518 support ( #8330 )
2021-11-27 18:15:26 +08:00
AmadeusGhost
f27a1742d6
ipq806x: add support for Arris RAC2V1A ( #7680 )
...
This commit add support for Arris RAC2V1A (aka TR4400-AC).
Hardware specs:
SoC: Qualcomm IPQ8065
RAM: 256 MB DDR3
Flash: 512 MB NAND
WiFi1: Qualcomm QCA9983 2.4 GHz
WiFi2: Qualcomm QCA9984 5 GHz
Ethernet1: AR8033 PHY -> Wan
Ethernet2: QCA8337 Switch -> Lan 1~4
LED: Status (red / blue)
USB: 1x USB 3.0 Type-A
Button: Reset, WPS
Power: DC 12V,2.5A
Installation:
Interrupt U-Boot, tftpboot initramfs image,
than sysupgrade to openwrt.
Very thanks for asushugo's help.
Signed-off-by: AmadeusGhost <amadeus@jmu.edu.cn>
2021-08-20 01:36:28 +08:00
AmadeusGhost
129bfbf305
ipq806x: add support for askey rt4230w 256m nand version ( #7595 )
...
The difference between flashing:
Interrupt U-Boot and run these commands:
setenv bootcmd "setenv mtdids nand0=nand0 && set mtdparts
mtdparts=nand0:0xDC00000@0x2400000(firmware) && ubi part firmware &&
ubi read 0x44000000 kernel 0x6e0000 && bootm"
saveenv
2021-08-06 18:07:10 +08:00
coolsnowwolf
f5e7d6cec5
ipq806x: Add support for Linksys E8350
2021-07-19 09:19:48 +08:00
Hugo Yuan
25369be255
ipq806x: Rename Netgear XR500 ( #7415 )
2021-07-17 21:00:17 +08:00
AmadeusGhost
aa73053a71
ipq806x: re-added support for Ruijie M520 again ( #7330 )
...
Signed-off-by: AmadeusGhost <amadeus@openjmu.xyz>
2021-07-11 01:25:59 +08:00
coolsnowwolf
adf04492ee
ipq806x: add NSS Hardware Offloading support
2021-07-09 17:03:34 +08:00
AmadeusGhost
87e2f29128
ipq806x: re-added support for Ruijie M520 ( #7105 )
...
Signed-off-by: AmadeusGhost <42570690+AmadeusGhost@users.noreply.github.com>
2021-06-20 07:45:22 +00:00
lean
a3f1e837fd
x64: fix grub2 booting
2021-06-15 17:58:07 +08:00
lean
7a50383ab6
add kernel 5.10 support and sync with upstream
2021-06-14 18:30:08 +08:00
