DHDAXCW-Rockchip-OpenWrt/target/linux/ath79/dts/ar7242_ubnt_edgeswitch-5xp.dts
AmadeusGhost 86bc29e4a8
kernel: bump 5.4 to 5.4.68 (#5555)
[mac80211]
 ca5ee6e mac80211: Fix potential endless loop
 2c14710 mac80211: add more AQL fixes/improvements
 91fb3ce mac80211: remove an obsolete patch that is no longer doing anything useful
 acf1733 mac80211: add preliminary support for enabling 802.11ax in config
 d717343 mac80211: update encap offload patches to the latest version
 673062f mac80211: allow bigger A-MSDU sizes in VHT, even if HT is limited
 caf7277 mac80211: do not allow bigger VHT MPDUs than the hardware supports
 cd36c0d mac80211: select the first available channel for 5GHz interfaces
 1c6d456 mac80211: fix regression in station connection monitor optimization
 4bd7689 mac80211: update sta connection monitor regression fix

[target]
 Sync: at91, ath25, ath79, lantiq, mediatek, mvebu.
2020-10-03 00:36:16 +08:00

77 lines
1.5 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "ar7242_ubnt_sw.dtsi"
/ {
compatible = "ubnt,edgeswitch-5xp", "qca,ar7242";
model = "Ubiquiti EdgeSwitch 5XP";
gpio-export {
compatible = "gpio-export";
poe_24v_port1 {
gpio-export,name = "ubnt:24v-poe:port1";
gpio-export,output = <0>;
gpios = <&gpio_hc595 1 GPIO_ACTIVE_HIGH>;
};
poe_24v_port2 {
gpio-export,name = "ubnt:24v-poe:port2";
gpio-export,output = <0>;
gpios = <&gpio_hc595 3 GPIO_ACTIVE_HIGH>;
};
poe_24v_port3 {
gpio-export,name = "ubnt:24v-poe:port3";
gpio-export,output = <0>;
gpios = <&gpio_hc595 5 GPIO_ACTIVE_HIGH>;
};
poe_24v_port4 {
gpio-export,name = "ubnt:24v-poe:port4";
gpio-export,output = <0>;
gpios = <&gpio_hc595 7 GPIO_ACTIVE_HIGH>;
};
poe_24v_port5 {
gpio-export,name = "ubnt:24v-poe:port5";
gpio-export,output = <0>;
gpios = <&gpio_hc595 9 GPIO_ACTIVE_HIGH>;
};
};
};
&mdio0 {
status = "okay";
phy0: ethernet-switch@0 {
compatible = "qca,ar8327";
reg = <0x0>;
qca,ar8327-initvals = <
0x04 0x05100000 /* PORT0 PAD MODE CTRL */
0x0c 0x05100000 /* PORT6 PAD MODE CTRL */
0x50 0x40004000 /* LED_CTRL0 */
0x54 0x40004000 /* LED_CTRL1 */
0x58 0x40004000 /* LED_CTRL2 */
0x5c 0x03ffff00 /* LED_CTRL3 */
0x7c 0x0000007e /* PORT0_STATUS */
0x94 0x0000007e /* PORT6_STATUS */
>;
};
};
&eth0 {
status = "okay";
phy-handle = <&phy0>;
phy-mode = "rgmii";
mtd-mac-address = <&art 0x0>;
fixed-link {
speed = <1000>;
full-duplex;
};
};