DHDAXCW-Rockchip-OpenWrt/package/kernel/mac80211/patches/subsys/305-mac80211-minstrel-merge-with-minstrel_ht-always-enab.patch
coolsnowwolf 88beed4c56 mac80211: netifd: Use a mask when using Usage: iw [options] command
Options:
	--debug		enable netlink debugging
	--version	show version (3.4)
Commands:
	help [command]
		Print usage for all or a specific command, e.g.
		"help wowlan" or "help wowlan enable".

	event [-t] [-r] [-f]
		Monitor events from the kernel.
		-t - print timestamp
		-r - print relative timstamp
		-f - print full frame for auth/assoc etc.

	phy
	list
		List all wireless devices and their capabilities.

	phy <phyname> info
		Show capabilities for the specified wireless device.

	dev
		List all network interfaces for wireless hardware.

	dev <devname> info
		Show information for this interface.

	dev <devname> del
		Remove this virtual interface

	dev <devname> interface add <name> type <type> [mesh_id <meshid>] [4addr on|off] [flags <flag>*]
	phy <phyname> interface add <name> type <type> [mesh_id <meshid>] [4addr on|off] [flags <flag>*]
		Add a new virtual interface with the given configuration.
		Valid interface types are: managed, ibss, monitor, mesh, wds.

		The flags are only used for monitor interfaces, valid flags are:
		none:     no special flags
		fcsfail:  show frames with FCS errors
		control:  show control frames
		otherbss: show frames from other BSSes
		cook:     use cooked mode

		The mesh_id is used only for mesh mode.

	dev <devname> ibss join <SSID> <freq in MHz> [HT20|HT40+|HT40-|NOHT] [fixed-freq] [<fixed bssid>] [beacon-interval <TU>] [basic-rates <rate in Mbps,rate2,...>] [mcast-rate <rate in Mbps>] [key d:0:abcde]
		Join the IBSS cell with the given SSID, if it doesn't exist create
		it on the given frequency. When fixed frequency is requested, don't
		join/create a cell on a different frequency. When a fixed BSSID is
		requested use that BSSID and do not adopt another cell's BSSID even
		if it has higher TSF and the same SSID. If an IBSS is created, create
		it with the specified basic-rates, multicast-rate and beacon-interval.

	dev <devname> ibss leave
		Leave the current IBSS cell.

	dev <devname> station dump
		List all stations known, e.g. the AP on managed interfaces

	dev <devname> station set <MAC address> vlan <ifindex>
		Set an AP VLAN for this station.

	dev <devname> station set <MAC address> plink_action <open|block>
		Set mesh peer link action for this station (peer).

	dev <devname> station del <MAC address>
		Remove the given station entry (use with caution!)

	dev <devname> station get <MAC address>
		Get information for a specific station.

	dev <devname> survey dump
		List all gathered channel survey data

	dev <devname> mesh leave
		Leave a mesh.

	dev <devname> mesh join <mesh ID> [mcast-rate <rate in Mbps>] [<param>=<value>]*
		Join a mesh with the given mesh ID with mcast-rate and mesh parameters.

	dev <devname> mpath dump
		List known mesh paths.

	dev <devname> mpath set <destination MAC address> next_hop <next hop MAC address>
		Set an existing mesh path's next hop.

	dev <devname> mpath new <destination MAC address> next_hop <next hop MAC address>
		Create a new mesh path (instead of relying on automatic discovery).

	dev <devname> mpath del <MAC address>
		Remove the mesh path to the given node.

	dev <devname> mpath get <MAC address>
		Get information on mesh path to the given node.

	dev <devname> scan [-u] [freq <freq>*] [ies <hex as 00:11:..>] [ssid <ssid>*|passive]
		Scan on the given frequencies and probe for the given SSIDs
		(or wildcard if not given) unless passive scanning is requested.
		If -u is specified print unknown data in the scan results.
		Specified (vendor) IEs must be well-formed.

	dev <devname> scan trigger [freq <freq>*] [ies <hex as 00:11:..>] [ssid <ssid>*|passive]
		Trigger a scan on the given frequencies with probing for the given
		SSIDs (or wildcard if not given) unless passive scanning is requested.

	dev <devname> scan dump [-u]
		Dump the current scan results. If -u is specified, print unknown
		data in scan results.

	reg get
		Print out the kernel's current regulatory domain information.

	reg set <ISO/IEC 3166-1 alpha2>
		Notify the kernel about the current regulatory domain.

	dev <devname> connect [-w] <SSID> [<freq in MHz>] [<bssid>] [key 0:abcde d:1:6162636465]
		Join the network with the given SSID (and frequency, BSSID).
		With -w, wait for the connect to finish or fail.

	dev <devname> disconnect
		Disconnect from the current network.

	dev <devname> link
		Print information about the current link, if any.

	dev <devname> offchannel <freq> <duration>
		Leave operating channel and go to the given channel for a while.

	dev <devname> cqm rssi <threshold|off> [<hysteresis>]
		Set connection quality monitor RSSI threshold.

	phy <phyname> wowlan show
		Show WoWLAN status.

	phy <phyname> wowlan disable
		Disable WoWLAN.

	phy <phyname> wowlan enable [any] [disconnect] [magic-packet] [gtk-rekey-failure] [eap-identity-request] [4way-handshake] [rfkill-release] [patterns <pattern>*]
		Enable WoWLAN with the given triggers.
		Each pattern is given as a bytestring with '-' in places where any byte
		may be present, e.g. 00:11:22:-:44 will match 00:11:22:33:44 and
		00:11:22:33:ff:44 etc.

	dev <devname> roc start <freq> <time>

	phy <phyname> set antenna <bitmap> | all | <tx bitmap> <rx bitmap>
		Set a bitmap of allowed antennas to use for TX and RX.
		The driver may reject antenna configurations it cannot support.

	dev <devname> set txpower <auto|fixed|limit> [<tx power in mBm>]
		Specify transmit power level and setting type.

	phy <phyname> set txpower <auto|fixed|limit> [<tx power in mBm>]
		Specify transmit power level and setting type.

	phy <phyname> set distance <distance>
		Set appropriate coverage class for given link distance in meters.
		Valid values: 0 - 114750

	phy <phyname> set coverage <coverage class>
		Set coverage class (1 for every 3 usec of air propagation time).
		Valid values: 0 - 255.

	phy <phyname> set netns <pid>
		Put this wireless device into a different network namespace

	phy <phyname> set rts <rts threshold|off>
		Set rts threshold.

	phy <phyname> set frag <fragmentation threshold|off>
		Set fragmentation threshold.

	dev <devname> set channel <channel> [HT20|HT40+|HT40-]
	phy <phyname> set channel <channel> [HT20|HT40+|HT40-]
	dev <devname> set freq <freq> [HT20|HT40+|HT40-]
	phy <phyname> set freq <freq> [HT20|HT40+|HT40-]
		Set frequency/channel the hardware is using, including HT
		configuration.

	phy <phyname> set name <new name>
		Rename this wireless device.

	dev <devname> set peer <MAC address>
		Set interface WDS peer.

	dev <devname> set noack_map <map>
		Set the NoAck map for the TIDs. (0x0009 = BE, 0x0006 = BK, 0x0030 = VI, 0x00C0 = VO)

	dev <devname> set 4addr <on|off>
		Set interface 4addr (WDS) mode.

	dev <devname> set type <type>
		Set interface type/mode.
		Valid interface types are: managed, ibss, monitor, mesh, wds.

	dev <devname> set meshid <meshid>
	dev <devname> set monitor <flag>*
		Set monitor flags. Valid flags are:
		none:     no special flags
		fcsfail:  show frames with FCS errors
		control:  show control frames
		otherbss: show frames from other BSSes
		cook:     use cooked mode

	dev <devname> set mesh_param <param>=<value> [<param>=<value>]*
		Set mesh parameter (run command without any to see available ones).

	dev <devname> set power_save <on|off>
		Set power save state to on or off.

	dev <devname> set bitrates [legacy-<2.4|5> <legacy rate in Mbps>*] [mcs-<2.4|5> <MCS index>*]
		Sets up the specified rate masks.
		Not passing any arguments would clear the existing mask (if any).

	dev <devname> get mesh_param [<param>]
		Retrieve mesh parameter (run command without any to see available ones).

	dev <devname> get power_save <param>
		Retrieve power save state.

You can omit the 'phy' or 'dev' if the identification is unique,
e.g. "iw wlan0 info" or "iw phy0 info". (Don't when scripting.)

Do NOT screenscrape this tool, we don't consider its output stable.
2019-03-20 13:58:58 +08:00

576 lines
14 KiB
Diff

From: Felix Fietkau <nbd@nbd.name>
Date: Sat, 10 Feb 2018 12:43:30 +0100
Subject: [PATCH] mac80211: minstrel: merge with minstrel_ht, always enable
VHT support
Legacy-only devices are not very common and the overhead of the extra
code for HT and VHT rates is not big enough to justify all those extra
lines of code to make it optional.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
---
--- a/net/mac80211/Kconfig
+++ b/net/mac80211/Kconfig
@@ -25,20 +25,6 @@ config MAC80211_RC_MINSTREL
---help---
This option enables the 'minstrel' TX rate control algorithm
-config MAC80211_RC_MINSTREL_HT
- bool "Minstrel 802.11n support" if EXPERT
- depends on MAC80211_RC_MINSTREL
- default y
- ---help---
- This option enables the 'minstrel_ht' TX rate control algorithm
-
-config MAC80211_RC_MINSTREL_VHT
- bool "Minstrel 802.11ac support" if EXPERT
- depends on MAC80211_RC_MINSTREL_HT
- default n
- ---help---
- This option enables VHT in the 'minstrel_ht' TX rate control algorithm
-
choice
prompt "Default rate control algorithm"
depends on MAC80211_HAS_RC
@@ -60,8 +46,7 @@ endchoice
config MAC80211_RC_DEFAULT
string
- default "minstrel_ht" if MAC80211_RC_DEFAULT_MINSTREL && MAC80211_RC_MINSTREL_HT
- default "minstrel" if MAC80211_RC_DEFAULT_MINSTREL
+ default "minstrel_ht" if MAC80211_RC_DEFAULT_MINSTREL
default ""
endif
--- a/net/mac80211/Makefile
+++ b/net/mac80211/Makefile
@@ -52,13 +52,14 @@ mac80211-$(CONFIG_PM) += pm.o
CFLAGS_trace.o := -I$(src)
-rc80211_minstrel-y := rc80211_minstrel.o
-rc80211_minstrel-$(CPTCFG_MAC80211_DEBUGFS) += rc80211_minstrel_debugfs.o
+rc80211_minstrel-y := \
+ rc80211_minstrel.o \
+ rc80211_minstrel_ht.o
-rc80211_minstrel_ht-y := rc80211_minstrel_ht.o
-rc80211_minstrel_ht-$(CPTCFG_MAC80211_DEBUGFS) += rc80211_minstrel_ht_debugfs.o
+rc80211_minstrel-$(CPTCFG_MAC80211_DEBUGFS) += \
+ rc80211_minstrel_debugfs.o \
+ rc80211_minstrel_ht_debugfs.o
mac80211-$(CPTCFG_MAC80211_RC_MINSTREL) += $(rc80211_minstrel-y)
-mac80211-$(CPTCFG_MAC80211_RC_MINSTREL_HT) += $(rc80211_minstrel_ht-y)
ccflags-y += -DDEBUG
--- a/net/mac80211/main.c
+++ b/net/mac80211/main.c
@@ -1308,18 +1308,12 @@ static int __init ieee80211_init(void)
if (ret)
return ret;
- ret = rc80211_minstrel_ht_init();
- if (ret)
- goto err_minstrel;
-
ret = ieee80211_iface_init();
if (ret)
goto err_netdev;
return 0;
err_netdev:
- rc80211_minstrel_ht_exit();
- err_minstrel:
rc80211_minstrel_exit();
return ret;
@@ -1327,7 +1321,6 @@ static int __init ieee80211_init(void)
static void __exit ieee80211_exit(void)
{
- rc80211_minstrel_ht_exit();
rc80211_minstrel_exit();
ieee80211s_stop();
--- a/net/mac80211/rate.h
+++ b/net/mac80211/rate.h
@@ -95,18 +95,5 @@ static inline void rc80211_minstrel_exit
}
#endif
-#ifdef CPTCFG_MAC80211_RC_MINSTREL_HT
-int rc80211_minstrel_ht_init(void);
-void rc80211_minstrel_ht_exit(void);
-#else
-static inline int rc80211_minstrel_ht_init(void)
-{
- return 0;
-}
-static inline void rc80211_minstrel_ht_exit(void)
-{
-}
-#endif
-
#endif /* IEEE80211_RATE_H */
--- a/net/mac80211/rc80211_minstrel.c
+++ b/net/mac80211/rc80211_minstrel.c
@@ -572,138 +572,6 @@ minstrel_rate_init(void *priv, struct ie
minstrel_update_rates(mp, mi);
}
-static void *
-minstrel_alloc_sta(void *priv, struct ieee80211_sta *sta, gfp_t gfp)
-{
- struct ieee80211_supported_band *sband;
- struct minstrel_sta_info *mi;
- struct minstrel_priv *mp = priv;
- struct ieee80211_hw *hw = mp->hw;
- int max_rates = 0;
- int i;
-
- mi = kzalloc(sizeof(struct minstrel_sta_info), gfp);
- if (!mi)
- return NULL;
-
- for (i = 0; i < NUM_NL80211_BANDS; i++) {
- sband = hw->wiphy->bands[i];
- if (sband && sband->n_bitrates > max_rates)
- max_rates = sband->n_bitrates;
- }
-
- mi->r = kcalloc(max_rates, sizeof(struct minstrel_rate), gfp);
- if (!mi->r)
- goto error;
-
- mi->sample_table = kmalloc_array(max_rates, SAMPLE_COLUMNS, gfp);
- if (!mi->sample_table)
- goto error1;
-
- mi->last_stats_update = jiffies;
- return mi;
-
-error1:
- kfree(mi->r);
-error:
- kfree(mi);
- return NULL;
-}
-
-static void
-minstrel_free_sta(void *priv, struct ieee80211_sta *sta, void *priv_sta)
-{
- struct minstrel_sta_info *mi = priv_sta;
-
- kfree(mi->sample_table);
- kfree(mi->r);
- kfree(mi);
-}
-
-static void
-minstrel_init_cck_rates(struct minstrel_priv *mp)
-{
- static const int bitrates[4] = { 10, 20, 55, 110 };
- struct ieee80211_supported_band *sband;
- u32 rate_flags = ieee80211_chandef_rate_flags(&mp->hw->conf.chandef);
- int i, j;
-
- sband = mp->hw->wiphy->bands[NL80211_BAND_2GHZ];
- if (!sband)
- return;
-
- for (i = 0, j = 0; i < sband->n_bitrates; i++) {
- struct ieee80211_rate *rate = &sband->bitrates[i];
-
- if (rate->flags & IEEE80211_RATE_ERP_G)
- continue;
-
- if ((rate_flags & sband->bitrates[i].flags) != rate_flags)
- continue;
-
- for (j = 0; j < ARRAY_SIZE(bitrates); j++) {
- if (rate->bitrate != bitrates[j])
- continue;
-
- mp->cck_rates[j] = i;
- break;
- }
- }
-}
-
-static void *
-minstrel_alloc(struct ieee80211_hw *hw, struct dentry *debugfsdir)
-{
- struct minstrel_priv *mp;
-
- mp = kzalloc(sizeof(struct minstrel_priv), GFP_ATOMIC);
- if (!mp)
- return NULL;
-
- /* contention window settings
- * Just an approximation. Using the per-queue values would complicate
- * the calculations and is probably unnecessary */
- mp->cw_min = 15;
- mp->cw_max = 1023;
-
- /* number of packets (in %) to use for sampling other rates
- * sample less often for non-mrr packets, because the overhead
- * is much higher than with mrr */
- mp->lookaround_rate = 5;
- mp->lookaround_rate_mrr = 10;
-
- /* maximum time that the hw is allowed to stay in one MRR segment */
- mp->segment_size = 6000;
-
- if (hw->max_rate_tries > 0)
- mp->max_retry = hw->max_rate_tries;
- else
- /* safe default, does not necessarily have to match hw properties */
- mp->max_retry = 7;
-
- if (hw->max_rates >= 4)
- mp->has_mrr = true;
-
- mp->hw = hw;
- mp->update_interval = 100;
-
-#ifdef CPTCFG_MAC80211_DEBUGFS
- mp->fixed_rate_idx = (u32) -1;
- debugfs_create_u32("fixed_rate_idx", S_IRUGO | S_IWUGO, debugfsdir,
- &mp->fixed_rate_idx);
-#endif
-
- minstrel_init_cck_rates(mp);
-
- return mp;
-}
-
-static void
-minstrel_free(void *priv)
-{
- kfree(priv);
-}
-
static u32 minstrel_get_expected_throughput(void *priv_sta)
{
struct minstrel_sta_info *mi = priv_sta;
@@ -722,28 +590,8 @@ static u32 minstrel_get_expected_through
}
const struct rate_control_ops mac80211_minstrel = {
- .name = "minstrel",
.tx_status_ext = minstrel_tx_status,
.get_rate = minstrel_get_rate,
.rate_init = minstrel_rate_init,
- .alloc = minstrel_alloc,
- .free = minstrel_free,
- .alloc_sta = minstrel_alloc_sta,
- .free_sta = minstrel_free_sta,
-#ifdef CPTCFG_MAC80211_DEBUGFS
- .add_sta_debugfs = minstrel_add_sta_debugfs,
-#endif
.get_expected_throughput = minstrel_get_expected_throughput,
};
-
-int __init
-rc80211_minstrel_init(void)
-{
- return ieee80211_rate_control_register(&mac80211_minstrel);
-}
-
-void
-rc80211_minstrel_exit(void)
-{
- ieee80211_rate_control_unregister(&mac80211_minstrel);
-}
--- a/net/mac80211/rc80211_minstrel.h
+++ b/net/mac80211/rc80211_minstrel.h
@@ -158,7 +158,5 @@ int minstrel_get_tp_avg(struct minstrel_
/* debugfs */
int minstrel_stats_open(struct inode *inode, struct file *file);
int minstrel_stats_csv_open(struct inode *inode, struct file *file);
-ssize_t minstrel_stats_read(struct file *file, char __user *buf, size_t len, loff_t *ppos);
-int minstrel_stats_release(struct inode *inode, struct file *file);
#endif
--- a/net/mac80211/rc80211_minstrel_debugfs.c
+++ b/net/mac80211/rc80211_minstrel_debugfs.c
@@ -54,22 +54,6 @@
#include <net/mac80211.h>
#include "rc80211_minstrel.h"
-ssize_t
-minstrel_stats_read(struct file *file, char __user *buf, size_t len, loff_t *ppos)
-{
- struct minstrel_debugfs_info *ms;
-
- ms = file->private_data;
- return simple_read_from_buffer(buf, len, ppos, ms->buf, ms->len);
-}
-
-int
-minstrel_stats_release(struct inode *inode, struct file *file)
-{
- kfree(file->private_data);
- return 0;
-}
-
int
minstrel_stats_open(struct inode *inode, struct file *file)
{
@@ -135,14 +119,6 @@ minstrel_stats_open(struct inode *inode,
return 0;
}
-static const struct file_operations minstrel_stat_fops = {
- .owner = THIS_MODULE,
- .open = minstrel_stats_open,
- .read = minstrel_stats_read,
- .release = minstrel_stats_release,
- .llseek = default_llseek,
-};
-
int
minstrel_stats_csv_open(struct inode *inode, struct file *file)
{
@@ -200,21 +176,3 @@ minstrel_stats_csv_open(struct inode *in
return 0;
}
-
-static const struct file_operations minstrel_stat_csv_fops = {
- .owner = THIS_MODULE,
- .open = minstrel_stats_csv_open,
- .read = minstrel_stats_read,
- .release = minstrel_stats_release,
- .llseek = default_llseek,
-};
-
-void
-minstrel_add_sta_debugfs(void *priv, void *priv_sta, struct dentry *dir)
-{
- struct minstrel_sta_info *mi = priv_sta;
-
- debugfs_create_file("rc_stats", S_IRUGO, dir, mi, &minstrel_stat_fops);
- debugfs_create_file("rc_stats_csv", S_IRUGO, dir, mi,
- &minstrel_stat_csv_fops);
-}
--- a/net/mac80211/rc80211_minstrel_ht.c
+++ b/net/mac80211/rc80211_minstrel_ht.c
@@ -137,12 +137,10 @@
} \
}
-#ifdef CPTCFG_MAC80211_RC_MINSTREL_VHT
static bool minstrel_vht_only = true;
module_param(minstrel_vht_only, bool, 0644);
MODULE_PARM_DESC(minstrel_vht_only,
"Use only VHT rates when VHT is supported by sta.");
-#endif
/*
* To enable sufficiently targeted rate sampling, MCS rates are divided into
@@ -171,7 +169,6 @@ const struct mcs_group minstrel_mcs_grou
CCK_GROUP,
-#ifdef CPTCFG_MAC80211_RC_MINSTREL_VHT
VHT_GROUP(1, 0, BW_20),
VHT_GROUP(2, 0, BW_20),
VHT_GROUP(3, 0, BW_20),
@@ -195,7 +192,6 @@ const struct mcs_group minstrel_mcs_grou
VHT_GROUP(1, 1, BW_80),
VHT_GROUP(2, 1, BW_80),
VHT_GROUP(3, 1, BW_80),
-#endif
};
static u8 sample_table[SAMPLE_COLUMNS][MCS_GROUP_RATES] __read_mostly;
@@ -1146,12 +1142,10 @@ minstrel_ht_update_caps(void *priv, stru
BUILD_BUG_ON(ARRAY_SIZE(minstrel_mcs_groups) != MINSTREL_GROUPS_NB);
-#ifdef CPTCFG_MAC80211_RC_MINSTREL_VHT
if (vht_cap->vht_supported)
use_vht = vht_cap->vht_mcs.tx_mcs_map != cpu_to_le16(~0);
else
-#endif
- use_vht = 0;
+ use_vht = 0;
msp->is_ht = true;
memset(mi, 0, sizeof(*mi));
@@ -1226,10 +1220,9 @@ minstrel_ht_update_caps(void *priv, stru
/* HT rate */
if (gflags & IEEE80211_TX_RC_MCS) {
-#ifdef CPTCFG_MAC80211_RC_MINSTREL_VHT
if (use_vht && minstrel_vht_only)
continue;
-#endif
+
mi->supported[i] = mcs->rx_mask[nss - 1];
if (mi->supported[i])
n_supported++;
@@ -1349,16 +1342,88 @@ minstrel_ht_free_sta(void *priv, struct
kfree(msp);
}
+static void
+minstrel_ht_init_cck_rates(struct minstrel_priv *mp)
+{
+ static const int bitrates[4] = { 10, 20, 55, 110 };
+ struct ieee80211_supported_band *sband;
+ u32 rate_flags = ieee80211_chandef_rate_flags(&mp->hw->conf.chandef);
+ int i, j;
+
+ sband = mp->hw->wiphy->bands[NL80211_BAND_2GHZ];
+ if (!sband)
+ return;
+
+ for (i = 0, j = 0; i < sband->n_bitrates; i++) {
+ struct ieee80211_rate *rate = &sband->bitrates[i];
+
+ if (rate->flags & IEEE80211_RATE_ERP_G)
+ continue;
+
+ if ((rate_flags & sband->bitrates[i].flags) != rate_flags)
+ continue;
+
+ for (j = 0; j < ARRAY_SIZE(bitrates); j++) {
+ if (rate->bitrate != bitrates[j])
+ continue;
+
+ mp->cck_rates[j] = i;
+ break;
+ }
+ }
+}
+
static void *
minstrel_ht_alloc(struct ieee80211_hw *hw, struct dentry *debugfsdir)
{
- return mac80211_minstrel.alloc(hw, debugfsdir);
+ struct minstrel_priv *mp;
+
+ mp = kzalloc(sizeof(struct minstrel_priv), GFP_ATOMIC);
+ if (!mp)
+ return NULL;
+
+ /* contention window settings
+ * Just an approximation. Using the per-queue values would complicate
+ * the calculations and is probably unnecessary */
+ mp->cw_min = 15;
+ mp->cw_max = 1023;
+
+ /* number of packets (in %) to use for sampling other rates
+ * sample less often for non-mrr packets, because the overhead
+ * is much higher than with mrr */
+ mp->lookaround_rate = 5;
+ mp->lookaround_rate_mrr = 10;
+
+ /* maximum time that the hw is allowed to stay in one MRR segment */
+ mp->segment_size = 6000;
+
+ if (hw->max_rate_tries > 0)
+ mp->max_retry = hw->max_rate_tries;
+ else
+ /* safe default, does not necessarily have to match hw properties */
+ mp->max_retry = 7;
+
+ if (hw->max_rates >= 4)
+ mp->has_mrr = true;
+
+ mp->hw = hw;
+ mp->update_interval = 100;
+
+#ifdef CPTCFG_MAC80211_DEBUGFS
+ mp->fixed_rate_idx = (u32) -1;
+ debugfs_create_u32("fixed_rate_idx", S_IRUGO | S_IWUGO, debugfsdir,
+ &mp->fixed_rate_idx);
+#endif
+
+ minstrel_ht_init_cck_rates(mp);
+
+ return mp;
}
static void
minstrel_ht_free(void *priv)
{
- mac80211_minstrel.free(priv);
+ kfree(priv);
}
static u32 minstrel_ht_get_expected_throughput(void *priv_sta)
@@ -1417,14 +1482,14 @@ static void __init init_sample_table(voi
}
int __init
-rc80211_minstrel_ht_init(void)
+rc80211_minstrel_init(void)
{
init_sample_table();
return ieee80211_rate_control_register(&mac80211_minstrel_ht);
}
void
-rc80211_minstrel_ht_exit(void)
+rc80211_minstrel_exit(void)
{
ieee80211_rate_control_unregister(&mac80211_minstrel_ht);
}
--- a/net/mac80211/rc80211_minstrel_ht.h
+++ b/net/mac80211/rc80211_minstrel_ht.h
@@ -15,11 +15,7 @@
*/
#define MINSTREL_MAX_STREAMS 3
#define MINSTREL_HT_STREAM_GROUPS 4 /* BW(=2) * SGI(=2) */
-#ifdef CPTCFG_MAC80211_RC_MINSTREL_VHT
#define MINSTREL_VHT_STREAM_GROUPS 6 /* BW(=3) * SGI(=2) */
-#else
-#define MINSTREL_VHT_STREAM_GROUPS 0
-#endif
#define MINSTREL_HT_GROUPS_NB (MINSTREL_MAX_STREAMS * \
MINSTREL_HT_STREAM_GROUPS)
@@ -34,11 +30,7 @@
#define MINSTREL_CCK_GROUP (MINSTREL_HT_GROUP_0 + MINSTREL_HT_GROUPS_NB)
#define MINSTREL_VHT_GROUP_0 (MINSTREL_CCK_GROUP + 1)
-#ifdef CPTCFG_MAC80211_RC_MINSTREL_VHT
#define MCS_GROUP_RATES 10
-#else
-#define MCS_GROUP_RATES 8
-#endif
struct mcs_group {
u32 flags;
--- a/net/mac80211/rc80211_minstrel_ht_debugfs.c
+++ b/net/mac80211/rc80211_minstrel_ht_debugfs.c
@@ -15,6 +15,22 @@
#include "rc80211_minstrel.h"
#include "rc80211_minstrel_ht.h"
+static ssize_t
+minstrel_stats_read(struct file *file, char __user *buf, size_t len, loff_t *ppos)
+{
+ struct minstrel_debugfs_info *ms;
+
+ ms = file->private_data;
+ return simple_read_from_buffer(buf, len, ppos, ms->buf, ms->len);
+}
+
+static int
+minstrel_stats_release(struct inode *inode, struct file *file)
+{
+ kfree(file->private_data);
+ return 0;
+}
+
static char *
minstrel_ht_stats_dump(struct minstrel_ht_sta *mi, int i, char *p)
{