mtk:add 300 ou and nx60 pro
This commit is contained in:
padavanonly
parent
988cda089f
commit
3070f705ec
311
defconfig/nx60pro-ipailna-high-power.config
Normal file
311
defconfig/nx60pro-ipailna-high-power.config
Normal file
@ -0,0 +1,311 @@
|
||||
CONFIG_TARGET_mediatek=y
|
||||
CONFIG_TARGET_mediatek_mt7986=y
|
||||
CONFIG_TARGET_MULTI_PROFILE=y
|
||||
CONFIG_TARGET_DEVICE_mediatek_mt7986_DEVICE_glinet_gl-mt6000=y
|
||||
CONFIG_TARGET_DEVICE_PACKAGES_mediatek_mt7986_DEVICE_glinet_gl-mt6000=""
|
||||
CONFIG_TARGET_DEVICE_mediatek_mt7986_DEVICE_tplink_tl-xdr6086=y
|
||||
CONFIG_TARGET_DEVICE_PACKAGES_mediatek_mt7986_DEVICE_tplink_tl-xdr6086=""
|
||||
CONFIG_TARGET_DEVICE_mediatek_mt7986_DEVICE_tplink_tl-xdr6088=y
|
||||
CONFIG_TARGET_DEVICE_PACKAGES_mediatek_mt7986_DEVICE_tplink_tl-xdr6088=""
|
||||
CONFIG_TARGET_DEVICE_mediatek_mt7986_DEVICE_xiaomi_redmi-router-ax6000=y
|
||||
CONFIG_TARGET_DEVICE_PACKAGES_mediatek_mt7986_DEVICE_xiaomi_redmi-router-ax6000=""
|
||||
CONFIG_TARGET_DEVICE_mediatek_mt7986_DEVICE_xiaomi_redmi-router-ax6000-stock=y
|
||||
CONFIG_TARGET_DEVICE_PACKAGES_mediatek_mt7986_DEVICE_xiaomi_redmi-router-ax6000-stock=""
|
||||
CONFIG_DEVEL=y
|
||||
CONFIG_TOOLCHAINOPTS=y
|
||||
CONFIG_BUSYBOX_CUSTOM=y
|
||||
CONFIG_TARGET_PER_DEVICE_ROOTFS=y
|
||||
CONFIG_AFALG_UPDATE_CTR_IV=y
|
||||
CONFIG_BUSYBOX_CONFIG_BLKID=y
|
||||
CONFIG_BUSYBOX_CONFIG_FEATURE_BLKID_TYPE=y
|
||||
CONFIG_BUSYBOX_CONFIG_VOLUMEID=y
|
||||
CONFIG_CONNINFRA_AUTO_UP=y
|
||||
CONFIG_CONNINFRA_EMI_SUPPORT=y
|
||||
# CONFIG_GDB is not set
|
||||
CONFIG_INCLUDE_CONFIG=y
|
||||
CONFIG_JSON_OVERVIEW_IMAGE_INFO=y
|
||||
# CONFIG_KERNEL_BLK_DEV_THROTTLING is not set
|
||||
# CONFIG_KERNEL_CFS_BANDWIDTH is not set
|
||||
CONFIG_KERNEL_CGROUP_DEVICE=y
|
||||
CONFIG_KERNEL_CGROUP_FREEZER=y
|
||||
CONFIG_KERNEL_DEVMEM=y
|
||||
# CONFIG_KERNEL_KEYS is not set
|
||||
# CONFIG_KERNEL_MEMCG_SWAP is not set
|
||||
CONFIG_KERNEL_NET_CLS_CGROUP=y
|
||||
CONFIG_MTK_ACK_CTS_TIMEOUT_SUPPORT=y
|
||||
CONFIG_MTK_AIR_MONITOR=y
|
||||
CONFIG_MTK_AMPDU_CONF_SUPPORT=y
|
||||
CONFIG_MTK_ANTENNA_CONTROL_SUPPORT=y
|
||||
CONFIG_MTK_APCLI_SUPPORT=y
|
||||
CONFIG_MTK_ATE_SUPPORT=y
|
||||
CONFIG_MTK_BACKGROUND_SCAN_SUPPORT=y
|
||||
CONFIG_MTK_CAL_BIN_FILE_SUPPORT=y
|
||||
CONFIG_MTK_CFG_SUPPORT_FALCON_MURU=y
|
||||
CONFIG_MTK_CFG_SUPPORT_FALCON_PP=y
|
||||
CONFIG_MTK_CFG_SUPPORT_FALCON_SR=y
|
||||
CONFIG_MTK_CFG_SUPPORT_FALCON_TXCMD_DBG=y
|
||||
CONFIG_MTK_CHIP_MT7986=y
|
||||
CONFIG_MTK_CONNINFRA_APSOC=y
|
||||
CONFIG_MTK_CONNINFRA_APSOC_MT7986=y
|
||||
CONFIG_MTK_CON_WPS_SUPPORT=y
|
||||
CONFIG_MTK_DBDC_MODE=y
|
||||
CONFIG_MTK_DOT11K_RRM_SUPPORT=y
|
||||
CONFIG_MTK_DOT11R_FT_SUPPORT=y
|
||||
CONFIG_MTK_DOT11W_PMF_SUPPORT=y
|
||||
CONFIG_MTK_DOT11_HE_AX=y
|
||||
CONFIG_MTK_DOT11_N_SUPPORT=y
|
||||
CONFIG_MTK_DOT11_VHT_AC=y
|
||||
CONFIG_MTK_FAST_NAT_SUPPORT=y
|
||||
CONFIG_MTK_FIRST_IF_EEPROM_FLASH=y
|
||||
CONFIG_MTK_FIRST_IF_IPAILNA=y
|
||||
CONFIG_MTK_FIRST_IF_MT7986=y
|
||||
CONFIG_MTK_GREENAP_SUPPORT=y
|
||||
CONFIG_MTK_G_BAND_256QAM_SUPPORT=y
|
||||
CONFIG_MTK_HDR_TRANS_RX_SUPPORT=y
|
||||
CONFIG_MTK_HDR_TRANS_TX_SUPPORT=y
|
||||
CONFIG_MTK_ICAP_SUPPORT=y
|
||||
CONFIG_MTK_IGMP_SNOOP_SUPPORT=y
|
||||
CONFIG_MTK_INTERWORKING=y
|
||||
CONFIG_MTK_BAND_STEERING=y
|
||||
CONFIG_MTK_MAP_SUPPORT=y
|
||||
CONFIG_MTK_MAP_R2_VER_SUPPORT=y
|
||||
CONFIG_MTK_MAP_R3_VER_SUPPORT=y
|
||||
CONFIG_MTK_MAP_R2_6E_SUPPORT=y
|
||||
CONFIG_MTK_MAP_R3_6E_SUPPORT=y
|
||||
CONFIG_MTK_MBO_SUPPORT=y
|
||||
CONFIG_MTK_MBSS_DTIM_SUPPORT=y
|
||||
CONFIG_MTK_MBSS_SUPPORT=y
|
||||
CONFIG_MTK_MCAST_RATE_SPECIFIC=y
|
||||
CONFIG_MTK_MGMT_TXPWR_CTRL=y
|
||||
CONFIG_MTK_MLME_MULTI_QUEUE_SUPPORT=y
|
||||
# CONFIG_MTK_MT7986_NEW_FW is not set
|
||||
CONFIG_MTK_MT_AP_SUPPORT=m
|
||||
CONFIG_MTK_MT_DFS_SUPPORT=y
|
||||
CONFIG_MTK_MT_MAC=y
|
||||
CONFIG_MTK_MT_WIFI=m
|
||||
CONFIG_MTK_MT_WIFI_PATH="mt_wifi"
|
||||
CONFIG_MTK_MUMIMO_SUPPORT=y
|
||||
CONFIG_MTK_MU_RA_SUPPORT=y
|
||||
CONFIG_MTK_OFFCHANNEL_SCAN_FEATURE=y
|
||||
CONFIG_MTK_OWE_SUPPORT=y
|
||||
CONFIG_MTK_PHY_ICS_SUPPORT=y
|
||||
CONFIG_MTK_QOS_R1_SUPPORT=y
|
||||
CONFIG_MTK_RA_PHY_RATE_SUPPORT=y
|
||||
CONFIG_MTK_RED_SUPPORT=y
|
||||
CONFIG_MTK_RTMP_FLASH_SUPPORT=y
|
||||
CONFIG_MTK_RT_FIRST_CARD_EEPROM="flash"
|
||||
CONFIG_MTK_RT_FIRST_IF_RF_OFFSET=0xc0000
|
||||
CONFIG_MTK_SCS_FW_OFFLOAD=y
|
||||
CONFIG_MTK_SECOND_IF_NONE=y
|
||||
CONFIG_MTK_SMART_CARRIER_SENSE_SUPPORT=y
|
||||
CONFIG_MTK_SPECTRUM_SUPPORT=y
|
||||
CONFIG_MTK_SUPPORT_OPENWRT=y
|
||||
CONFIG_MTK_THERMAL_PROTECT_SUPPORT=y
|
||||
CONFIG_MTK_THIRD_IF_NONE=y
|
||||
CONFIG_MTK_TPC_SUPPORT=y
|
||||
CONFIG_MTK_TXBF_SUPPORT=y
|
||||
CONFIG_MTK_UAPSD=y
|
||||
CONFIG_MTK_VLAN_SUPPORT=y
|
||||
CONFIG_MTK_VOW_SUPPORT=y
|
||||
CONFIG_MTK_WARP_V2=y
|
||||
CONFIG_MTK_WDS_SUPPORT=y
|
||||
CONFIG_MTK_WHNAT_SUPPORT=m
|
||||
CONFIG_MTK_WIFI_ADIE_TYPE="mt7976"
|
||||
CONFIG_MTK_WIFI_BASIC_FUNC=y
|
||||
CONFIG_MTK_WIFI_DRIVER=y
|
||||
CONFIG_MTK_WIFI_EAP_FEATURE=y
|
||||
CONFIG_MTK_WIFI_FW_BIN_LOAD=y
|
||||
CONFIG_MTK_WIFI_MODE_AP=m
|
||||
CONFIG_MTK_WIFI_MT_MAC=y
|
||||
CONFIG_MTK_WIFI_SKU_TYPE="AX6000"
|
||||
CONFIG_MTK_WIFI_TWT_SUPPORT=y
|
||||
CONFIG_MTK_WLAN_HOOK=y
|
||||
CONFIG_MTK_WLAN_SERVICE=y
|
||||
CONFIG_MTK_WNM_SUPPORT=y
|
||||
CONFIG_MTK_WPA3_SUPPORT=y
|
||||
CONFIG_MTK_WSC_INCLUDED=y
|
||||
CONFIG_MTK_WSC_V2_SUPPORT=y
|
||||
# CONFIG_OPENSSL_ENGINE_BUILTIN is not set
|
||||
# CONFIG_OPENSSL_PREFER_CHACHA_OVER_GCM is not set
|
||||
CONFIG_OPENSSL_WITH_NPN=y
|
||||
# CONFIG_PACKAGE_TURBOACC_INCLUDE_FLOW_OFFLOADING is not set
|
||||
CONFIG_PACKAGE_TURBOACC_INCLUDE_NO_FASTPATH=y
|
||||
CONFIG_PACKAGE_blockd=y
|
||||
CONFIG_PACKAGE_ca-certificates=y
|
||||
CONFIG_PACKAGE_datconf=y
|
||||
CONFIG_PACKAGE_datconf-lua=y
|
||||
CONFIG_PACKAGE_ethtool=y
|
||||
CONFIG_PACKAGE_ebtables=y
|
||||
CONFIG_PACKAGE_htop=y
|
||||
CONFIG_PACKAGE_ip-bridge=y
|
||||
CONFIG_PACKAGE_ip6tables-extra=y
|
||||
CONFIG_PACKAGE_ipset=y
|
||||
CONFIG_PACKAGE_iptables-mod-conntrack-extra=y
|
||||
CONFIG_PACKAGE_iptables-mod-extra=y
|
||||
CONFIG_PACKAGE_iptables-mod-filter=y
|
||||
CONFIG_PACKAGE_iptables-mod-hashlimit=y
|
||||
CONFIG_PACKAGE_iptables-mod-iface=y
|
||||
CONFIG_PACKAGE_iptables-mod-ipmark=y
|
||||
CONFIG_PACKAGE_iptables-mod-ipopt=y
|
||||
CONFIG_PACKAGE_iptables-mod-iprange=y
|
||||
CONFIG_PACKAGE_iptables-mod-ipv4options=y
|
||||
CONFIG_PACKAGE_iptables-mod-nat-extra=y
|
||||
CONFIG_PACKAGE_iptables-mod-proto=y
|
||||
CONFIG_PACKAGE_iptables-mod-tee=y
|
||||
CONFIG_PACKAGE_iptables-mod-tproxy=y
|
||||
CONFIG_PACKAGE_iptables-mod-u32=y
|
||||
CONFIG_PACKAGE_iw=y
|
||||
CONFIG_PACKAGE_iwinfo=y
|
||||
CONFIG_PACKAGE_kmod-ata-core=y
|
||||
CONFIG_PACKAGE_kmod-conninfra=y
|
||||
CONFIG_PACKAGE_kmod-crypto-acompress=y
|
||||
CONFIG_PACKAGE_kmod-crypto-ccm=y
|
||||
CONFIG_PACKAGE_kmod-crypto-cmac=y
|
||||
CONFIG_PACKAGE_kmod-crypto-crc32c=y
|
||||
CONFIG_PACKAGE_kmod-crypto-ctr=y
|
||||
CONFIG_PACKAGE_kmod-crypto-des=y
|
||||
CONFIG_PACKAGE_kmod-crypto-gcm=y
|
||||
CONFIG_PACKAGE_kmod-crypto-gf128=y
|
||||
CONFIG_PACKAGE_kmod-crypto-ghash=y
|
||||
CONFIG_PACKAGE_kmod-crypto-hmac=y
|
||||
CONFIG_PACKAGE_kmod-crypto-md4=y
|
||||
CONFIG_PACKAGE_kmod-crypto-md5=y
|
||||
CONFIG_PACKAGE_kmod-crypto-rng=y
|
||||
CONFIG_PACKAGE_kmod-crypto-seqiv=y
|
||||
CONFIG_PACKAGE_kmod-crypto-sha256=y
|
||||
CONFIG_PACKAGE_kmod-crypto-sha512=y
|
||||
CONFIG_PACKAGE_kmod-ebtables=y
|
||||
CONFIG_PACKAGE_kmod-ebtables-ipv4=y
|
||||
CONFIG_PACKAGE_kmod-ebtables-ipv6=y
|
||||
CONFIG_PACKAGE_kmod-fs-autofs4=y
|
||||
CONFIG_PACKAGE_kmod-fs-vfat=y
|
||||
CONFIG_PACKAGE_kmod-inet-diag=y
|
||||
CONFIG_PACKAGE_kmod-ip6tables-extra=y
|
||||
CONFIG_PACKAGE_kmod-ipt-compat-xtables=y
|
||||
CONFIG_PACKAGE_kmod-ipt-conntrack-extra=y
|
||||
CONFIG_PACKAGE_kmod-ipt-extra=y
|
||||
CONFIG_PACKAGE_kmod-ipt-filter=y
|
||||
CONFIG_PACKAGE_kmod-ipt-hashlimit=y
|
||||
CONFIG_PACKAGE_kmod-ipt-iface=y
|
||||
CONFIG_PACKAGE_kmod-ipt-ipmark=y
|
||||
CONFIG_PACKAGE_kmod-ipt-ipopt=y
|
||||
CONFIG_PACKAGE_kmod-ipt-iprange=y
|
||||
CONFIG_PACKAGE_kmod-ipt-ipv4options=y
|
||||
CONFIG_PACKAGE_kmod-ipt-nat-extra=y
|
||||
CONFIG_PACKAGE_kmod-ipt-offload=y
|
||||
CONFIG_PACKAGE_kmod-ipt-proto=y
|
||||
CONFIG_PACKAGE_kmod-ipt-raw6=y
|
||||
CONFIG_PACKAGE_kmod-ipt-tee=y
|
||||
CONFIG_PACKAGE_kmod-ipt-tproxy=y
|
||||
CONFIG_PACKAGE_kmod-ipt-u32=y
|
||||
CONFIG_PACKAGE_kmod-leds-ws2812b=y
|
||||
CONFIG_PACKAGE_kmod-lib-crc32c=y
|
||||
CONFIG_PACKAGE_kmod-lib-lzo=y
|
||||
CONFIG_PACKAGE_kmod-mediatek_hnat=y
|
||||
CONFIG_PACKAGE_kmod-mt_wifi=y
|
||||
CONFIG_PACKAGE_kmod-nf-flow=y
|
||||
CONFIG_PACKAGE_kmod-nls-base=y
|
||||
CONFIG_PACKAGE_kmod-nls-cp437=y
|
||||
CONFIG_PACKAGE_kmod-nls-iso8859-1=y
|
||||
CONFIG_PACKAGE_kmod-nls-utf8=y
|
||||
CONFIG_PACKAGE_kmod-scsi-core=y
|
||||
CONFIG_PACKAGE_kmod-tcp-bbr=y
|
||||
CONFIG_PACKAGE_kmod-tun=y
|
||||
CONFIG_PACKAGE_kmod-warp=y
|
||||
CONFIG_PACKAGE_kmod-zram=y
|
||||
CONFIG_PACKAGE_kvcedit=y
|
||||
CONFIG_PACKAGE_libatomic=y
|
||||
CONFIG_PACKAGE_libblkid=y
|
||||
CONFIG_PACKAGE_libcap-ng=y
|
||||
CONFIG_PACKAGE_libcbor=y
|
||||
CONFIG_PACKAGE_libevdev=y
|
||||
CONFIG_PACKAGE_libfido2=y
|
||||
CONFIG_PACKAGE_libipset=y
|
||||
CONFIG_PACKAGE_libkvcutil=y
|
||||
CONFIG_PACKAGE_libncurses=y
|
||||
CONFIG_PACKAGE_libnl=y
|
||||
CONFIG_PACKAGE_libnl-core=y
|
||||
CONFIG_PACKAGE_libnl-genl=y
|
||||
CONFIG_PACKAGE_libnl-nf=y
|
||||
CONFIG_PACKAGE_libnl-route=y
|
||||
CONFIG_PACKAGE_libopenssl-afalg_sync=y
|
||||
CONFIG_PACKAGE_libopenssl-devcrypto=y
|
||||
CONFIG_PACKAGE_libpcap=y
|
||||
CONFIG_PACKAGE_libstdcpp=y
|
||||
CONFIG_PACKAGE_libudev-zero=y
|
||||
CONFIG_PACKAGE_libuuid=y
|
||||
CONFIG_PACKAGE_luci-app-eqos-mtk=y
|
||||
CONFIG_PACKAGE_luci-app-mtwifi-cfg=y
|
||||
CONFIG_PACKAGE_lua-cjson=y
|
||||
# CONFIG_PACKAGE_luci-app-passwall_INCLUDE_Haproxy is not set
|
||||
# CONFIG_PACKAGE_luci-app-passwall_INCLUDE_ShadowsocksR_Libev_Client is not set
|
||||
# CONFIG_PACKAGE_luci-app-passwall_INCLUDE_Shadowsocks_Libev_Client is not set
|
||||
# CONFIG_PACKAGE_luci-app-passwall_INCLUDE_Shadowsocks_Libev_Server is not set
|
||||
# CONFIG_PACKAGE_luci-app-passwall_INCLUDE_Shadowsocks_Rust_Client is not set
|
||||
# CONFIG_PACKAGE_luci-app-passwall_INCLUDE_Simple_Obfs is not set
|
||||
# CONFIG_PACKAGE_luci-app-passwall_INCLUDE_Trojan_Plus is not set
|
||||
# CONFIG_PACKAGE_luci-app-passwall_INCLUDE_V2ray is not set
|
||||
# CONFIG_PACKAGE_luci-app-passwall_INCLUDE_V2ray_Plugin is not set
|
||||
# CONFIG_PACKAGE_luci-app-passwall_INCLUDE_Xray is not set
|
||||
# CONFIG_PACKAGE_luci-app-rclone_INCLUDE_rclone-ng is not set
|
||||
# CONFIG_PACKAGE_luci-app-rclone_INCLUDE_rclone-webui is not set
|
||||
# CONFIG_PACKAGE_luci-app-ssr-plus_INCLUDE_ChinaDNS_NG is not set
|
||||
CONFIG_PACKAGE_luci-app-ssr-plus_INCLUDE_NONE_V2RAY=y
|
||||
CONFIG_PACKAGE_wifi-scripts=y
|
||||
# CONFIG_PACKAGE_luci-app-ssr-plus_INCLUDE_ShadowsocksR_Libev_Client is not set
|
||||
CONFIG_PACKAGE_luci-app-ssr-plus_INCLUDE_Shadowsocks_NONE_Client=y
|
||||
CONFIG_PACKAGE_luci-app-ssr-plus_INCLUDE_Shadowsocks_NONE_Server=y
|
||||
# CONFIG_PACKAGE_luci-app-ssr-plus_INCLUDE_Shadowsocks_Rust_Client is not set
|
||||
# CONFIG_PACKAGE_luci-app-ssr-plus_INCLUDE_Shadowsocks_Rust_Server is not set
|
||||
# CONFIG_PACKAGE_luci-app-ssr-plus_INCLUDE_Shadowsocks_Simple_Obfs is not set
|
||||
# CONFIG_PACKAGE_luci-app-ssr-plus_INCLUDE_Xray is not set
|
||||
CONFIG_PACKAGE_luci-app-turboacc-mtk=y
|
||||
CONFIG_PACKAGE_luci-app-upnp-mtk-adjust=y
|
||||
# CONFIG_PACKAGE_luci-app-vssr_INCLUDE_ShadowsocksR_Libev_Server is not set
|
||||
# CONFIG_PACKAGE_luci-app-vssr_INCLUDE_Trojan is not set
|
||||
# CONFIG_PACKAGE_luci-app-vssr_INCLUDE_Xray is not set
|
||||
# CONFIG_PACKAGE_luci-app-vssr_INCLUDE_Xray_plugin is not set
|
||||
CONFIG_PACKAGE_luci-i18n-mtwifi-cfg-zh-cn=y
|
||||
CONFIG_PACKAGE_luci-i18n-turboacc-mtk-zh-cn=y
|
||||
CONFIG_PACKAGE_luci-theme-argon=y
|
||||
CONFIG_PACKAGE_luci-theme-bootstrap-mod=y
|
||||
CONFIG_PACKAGE_mii_mgr=y
|
||||
CONFIG_PACKAGE_mtkhqos_util=y
|
||||
CONFIG_PACKAGE_mtk-smp=y
|
||||
CONFIG_PACKAGE_nano=y
|
||||
CONFIG_PACKAGE_openssh-keygen=y
|
||||
CONFIG_PACKAGE_openssh-sftp-server=y
|
||||
CONFIG_PACKAGE_openssl-util=y
|
||||
CONFIG_PACKAGE_regs=y
|
||||
CONFIG_PACKAGE_resolveip=y
|
||||
# CONFIG_PACKAGE_swconfig is not set
|
||||
CONFIG_PACKAGE_switch=y
|
||||
CONFIG_PACKAGE_tcpdump=y
|
||||
CONFIG_PACKAGE_terminfo=y
|
||||
CONFIG_PACKAGE_wifi-dats=y
|
||||
CONFIG_PACKAGE_mtwifi-cfg=y
|
||||
CONFIG_PACKAGE_wireless-regdb=y
|
||||
CONFIG_PACKAGE_wireless-tools=y
|
||||
CONFIG_PACKAGE_zram-swap=y
|
||||
# CONFIG_PKG_CHECK_FORMAT_SECURITY is not set
|
||||
# CONFIG_PKG_FORTIFY_SOURCE_1 is not set
|
||||
CONFIG_PKG_FORTIFY_SOURCE_2=y
|
||||
CONFIG_WARP_CHIPSET="mt7986"
|
||||
CONFIG_WARP_DBG_SUPPORT=y
|
||||
CONFIG_WARP_MEMORY_LEAK_DBG=y
|
||||
CONFIG_WARP_NEW_FW=y
|
||||
CONFIG_WARP_VERSION=2
|
||||
CONFIG_WED_HW_RRO_SUPPORT=y
|
||||
# CONFIG_WOLFSSL_HAS_ECC25519 is not set
|
||||
CONFIG_first_card=y
|
||||
CONFIG_first_card_name="MT7986"
|
||||
# CONFIG_AFALG_FALLBACK is not set
|
||||
# CONFIG_MTK_BAND_STEERING is not set
|
||||
# CONFIG_MTK_DEFAULT_5G_PROFILE is not set
|
||||
# CONFIG_MTK_MAC_REPEATER_SUPPORT is not set
|
||||
# CONFIG_MTK_MULTI_PROFILE_SUPPORT is not set
|
||||
# CONFIG_MTK_PCIE_ASPM_DYM_CTRL_SUPPORT is not set
|
||||
# CONFIG_MTK_PRE_CAL_TRX_SET1_SUPPORT is not set
|
||||
# CONFIG_MTK_PRE_CAL_TRX_SET2_SUPPORT is not set
|
||||
# CONFIG_MTK_RLM_CAL_CACHE_SUPPORT is not set
|
||||
# CONFIG_MTK_SNIFFER_RADIOTAP_SUPPORT is not set
|
||||
@ -736,10 +736,11 @@ setup_model()
|
||||
case $board in
|
||||
xiaomi,redmi-router-ax6000* |\
|
||||
bananapi,bpi-r3mini* |\
|
||||
netcore,n60 |\
|
||||
netcore,n60* |\
|
||||
glinet,gl-mt6000|\
|
||||
jdcloud,re-cp-03 |\
|
||||
tplink,tl-xdr608* |\
|
||||
zyxel,ex5700 |\
|
||||
*7986*)
|
||||
MT7986_whnat $num_of_wifi $usbnet
|
||||
;;
|
||||
|
||||
@ -300,10 +300,8 @@ define KernelPackage/mt_wifi/config
|
||||
endef
|
||||
|
||||
define FIXUP_NEW_MCU_FW_API
|
||||
@if [ "$$(CONFIG_MTK_MT7981_NEW_FW)" = "y" ] || [ "$$(CONFIG_MTK_MT7986_NEW_FW)" = "y" ]; then \
|
||||
echo "Fixup new mcu fw API"; \
|
||||
patch -p1 -d $(PKG_BUILD_DIR) < ./files/fix-new-mcu-fw-api.patch; \
|
||||
fi
|
||||
patch -p1 -d $(PKG_BUILD_DIR) < ./files/fix-new-mcu-fw-api.patch
|
||||
@if [ "$$(CONFIG_MTK_MT7986_NEW_FW)" = "y" ]; then \
|
||||
echo "Fixup eeprom reading API"; \
|
||||
patch -p1 -d $(PKG_BUILD_DIR) < ./files/eeprom-flash-api.patch; \
|
||||
@ -326,21 +324,13 @@ if [ "$$(CONFIG_MTK_WIFI_FW_BIN_LOAD)" = "y" ]; then \
|
||||
rm -rf $(1)/lib/firmware/; \
|
||||
$(INSTALL_DIR) $(1)/lib/firmware/; \
|
||||
if [ "$$(CONFIG_MTK_CHIP_MT7986)" = "y" ] ; then \
|
||||
if [ "$$(CONFIG_MTK_MT7986_NEW_FW)" = "y" ]; then \
|
||||
$(INSTALL_BIN) ./files/$$(MT7986_FW_DIR)/WIFI_RAM_CODE_MT7986.bin \
|
||||
./files/$$(MT7986_FW_DIR)/WIFI_RAM_CODE_MT7986_MT7975.bin \
|
||||
./files/$$(MT7986_FW_DIR)/mt7986_patch_e1_hdr.bin \
|
||||
./files/$$(MT7986_FW_DIR)/mt7986_patch_e1_hdr_mt7975.bin \
|
||||
./files/$$(MT7986_FW_DIR)/7986_WACPU_RAM_CODE_release.bin $(1)/lib/firmware/; \
|
||||
else \
|
||||
$(INSTALL_BIN) $(PKG_BUILD_DIR)/bin/mt7986/rebb/WIFI_RAM_CODE_MT7986.bin \
|
||||
$(PKG_BUILD_DIR)/bin/mt7986/rebb/WIFI_RAM_CODE_MT7986_MT7975.bin \
|
||||
$(PKG_BUILD_DIR)/bin/mt7986/rebb/mt7986_patch_e1_hdr.bin \
|
||||
$(PKG_BUILD_DIR)/bin/mt7986/rebb/mt7986_patch_e1_hdr_mt7975.bin \
|
||||
$(PKG_BUILD_DIR)/bin/mt7986/rebb/7986_WACPU_RAM_CODE_release.bin $(1)/lib/firmware/; \
|
||||
fi ; \
|
||||
$(INSTALL_BIN) ./files/$$(MT7986_FW_DIR)/WIFI_RAM_CODE_MT7986.bin \
|
||||
./files/$$(MT7986_FW_DIR)/WIFI_RAM_CODE_MT7986_MT7975.bin \
|
||||
./files/$$(MT7986_FW_DIR)/mt7986_patch_e1_hdr.bin \
|
||||
./files/$$(MT7986_FW_DIR)/mt7986_patch_e1_hdr_mt7975.bin \
|
||||
./files/$$(MT7986_FW_DIR)/7986_WACPU_RAM_CODE_release.bin $(1)/lib/firmware/; \
|
||||
if [ "$$(CONFIG_MTK_WIFI_SKU_TYPE)" = "AX6000" -o "$$(CONFIG_MTK_WIFI_SKU_TYPE)" = "AX8400" ] ; then \
|
||||
$(INSTALL_BIN) $(PKG_BUILD_DIR)/bin/mt7986/rebb/MT7986_iPAiLNA_EEPROM_AX6000.bin $(PKG_BUILD_DIR)/bin/mt7986/rebb/MT7986_ePAeLNA_EEPROM_AX6000.bin \
|
||||
$(INSTALL_BIN) ./files/mt7986-default-eeprom/MT7986_iPAiLNA_EEPROM_AX6000.bin ./files/mt7986-default-eeprom/MT7986_ePAeLNA_EEPROM_AX6000.bin \
|
||||
$(1)/lib/firmware/; \
|
||||
fi; \
|
||||
if [ "$$(CONFIG_MTK_WIFI_SKU_TYPE)" = "AX4200" ] ; then \
|
||||
|
||||
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
@ -5,6 +5,7 @@
|
||||
# See /LICENSE for more information.
|
||||
#
|
||||
|
||||
|
||||
include $(TOPDIR)/rules.mk
|
||||
|
||||
PKG_NAME:=ethtool
|
||||
|
||||
@ -1,67 +0,0 @@
|
||||
From c88eb6f4e9b2d8f71f3391db2bf0ec82ecccae81 Mon Sep 17 00:00:00 2001
|
||||
From: Daniel Golle <daniel@makrotopia.org>
|
||||
Date: Wed, 12 Feb 2025 04:12:42 +0000
|
||||
Subject: [PATCH] ethtool: make building for RSS input xfrm optional
|
||||
|
||||
Unfortunately there is no way to detect at runtime if the kernel the
|
||||
support for RSS input transformation, and the default value
|
||||
RXH_XFRM_NO_CHANGE (0xff) used by newer ethtool results in breakage
|
||||
with older kernels.
|
||||
As a stop-gap solution simply don't compile with support for input
|
||||
xfrm by default.
|
||||
|
||||
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
|
||||
---
|
||||
configure.ac | 10 ++++++++++
|
||||
ethtool.c | 10 ++++++++++
|
||||
2 files changed, 20 insertions(+)
|
||||
|
||||
--- a/configure.ac
|
||||
+++ b/configure.ac
|
||||
@@ -45,6 +45,16 @@ if test x$enable_pretty_dump = xyes; the
|
||||
fi
|
||||
AM_CONDITIONAL([ETHTOOL_ENABLE_PRETTY_DUMP], [test x$enable_pretty_dump = xyes])
|
||||
|
||||
+AC_ARG_ENABLE(rss-input-xfrm,
|
||||
+ [ --enable-rss-input-xfrm build with support for RSS input transformation (disabled by default)],
|
||||
+ ,
|
||||
+ enable_rss_input_xfrm=no)
|
||||
+if test x$enable_rss_input_xfrm = xyes; then
|
||||
+ AC_DEFINE(ETHTOOL_ENABLE_RSS_INPUT_XFRM, 1,
|
||||
+ [Define this to enable building with support for RSS input transformation.])
|
||||
+fi
|
||||
+AM_CONDITIONAL([ETHTOOL_ENABLE_RSS_INPUT_XFRM], [test x$enable_rss_input_xfrm = xyes])
|
||||
+
|
||||
AC_ARG_WITH([bash-completion-dir],
|
||||
AS_HELP_STRING([--with-bash-completion-dir[=PATH]],
|
||||
[Install the bash-completion script in this directory. @<:@default=yes@:>@]),
|
||||
--- a/ethtool.c
|
||||
+++ b/ethtool.c
|
||||
@@ -4109,9 +4109,11 @@ static int do_grxfh(struct cmd_context *
|
||||
(const char *)hfuncs->data + i * ETH_GSTRING_LEN,
|
||||
(rss->hfunc & (1 << i)) ? "on" : "off");
|
||||
|
||||
+#ifdef ETHTOOL_ENABLE_RSS_INPUT_XFRM
|
||||
printf("RSS input transformation:\n");
|
||||
printf(" symmetric-xor: %s\n",
|
||||
(rss->input_xfrm & RXH_XFRM_SYM_XOR) ? "on" : "off");
|
||||
+#endif
|
||||
|
||||
out:
|
||||
free(hfuncs);
|
||||
@@ -4431,7 +4433,15 @@ static int do_srxfh(struct cmd_context *
|
||||
rss->cmd = ETHTOOL_SRSSH;
|
||||
rss->rss_context = rss_context;
|
||||
rss->hfunc = req_hfunc;
|
||||
+#ifdef ETHTOOL_ENABLE_RSS_INPUT_XFRM
|
||||
rss->input_xfrm = req_input_xfrm;
|
||||
+#else
|
||||
+ if (req_input_xfrm != 0xff) {
|
||||
+ perror("Compiled for kernel without support for input transformation");
|
||||
+ err = 1;
|
||||
+ goto free;
|
||||
+ }
|
||||
+#endif
|
||||
if (delete) {
|
||||
rss->indir_size = rss->key_size = 0;
|
||||
} else {
|
||||
@ -0,0 +1,353 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
|
||||
/dts-v1/;
|
||||
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/leds/common.h>
|
||||
|
||||
#include "mt7986a.dtsi"
|
||||
#include "mt7986a-pinctrl.dtsi"
|
||||
/ {
|
||||
model = "Netcore N60 PRO";
|
||||
compatible = "netcore,n60-pro", "mediatek,mt7986a";
|
||||
chosen {
|
||||
bootargs = "console=ttyS0,115200n1 loglevel=8 \
|
||||
earlycon=uart8250,mmio32,0x11002000";
|
||||
};
|
||||
|
||||
aliases {
|
||||
led-boot = &led_status_red;
|
||||
led-failsafe = &led_status_red;
|
||||
led-running = &led_status_blue;
|
||||
led-upgrade = &led_status_blue;
|
||||
};
|
||||
|
||||
memory {
|
||||
reg = <0 0x40000000 0 0x20000000>;
|
||||
};
|
||||
|
||||
gpio-keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
button-reset {
|
||||
label = "reset";
|
||||
linux,code = <KEY_RESTART>;
|
||||
gpios = <&pio 9 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
button-wps {
|
||||
label = "wps";
|
||||
linux,code = <KEY_WPS_BUTTON>;
|
||||
gpios = <&pio 10 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led_status_red: status_red {
|
||||
label = "red:status";
|
||||
gpios = <&pio 29 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led_status_blue: status_blue {
|
||||
label = "blue:status";
|
||||
gpios = <&pio 32 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
nmbm_spim_nand {
|
||||
compatible = "generic,nmbm";
|
||||
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
lower-mtd-device = <&spi_nand>;
|
||||
forced-create;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "BL2";
|
||||
reg = <0x00000 0x0100000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@100000 {
|
||||
label = "u-boot-env";
|
||||
reg = <0x0100000 0x0080000>;
|
||||
};
|
||||
|
||||
Factory: partition@180000 {
|
||||
label = "Factory";
|
||||
reg = <0x180000 0x0200000>;
|
||||
};
|
||||
|
||||
partition@380000 {
|
||||
label = "FIP";
|
||||
reg = <0x380000 0x0200000>;
|
||||
};
|
||||
|
||||
partition@580000 {
|
||||
label = "ubi";
|
||||
reg = <0x580000 0x7280000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
reg_3p3v: regulator-3p3v {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "fixed-3.3V";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
usb_vbus: regulator-usb-vbus {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "usb_vbus";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
gpios = <&pio 24 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
regulator-boot-on;
|
||||
};
|
||||
};
|
||||
|
||||
|
||||
&crypto {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
ð {
|
||||
status = "okay";
|
||||
|
||||
gmac0: mac@0 {
|
||||
compatible = "mediatek,eth-mac";
|
||||
reg = <0>;
|
||||
phy-mode = "2500base-x";
|
||||
fixed-link {
|
||||
speed = <2500>;
|
||||
full-duplex;
|
||||
pause;
|
||||
};
|
||||
};
|
||||
|
||||
gmac1: mac@1 {
|
||||
compatible = "mediatek,eth-mac";
|
||||
reg = <1>;
|
||||
label = "wan";
|
||||
phy-mode = "2500base-x";
|
||||
|
||||
fixed-link {
|
||||
speed = <2500>;
|
||||
full-duplex;
|
||||
pause;
|
||||
};
|
||||
};
|
||||
|
||||
mdio: mdio-bus {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
&mdio {
|
||||
phy5: phy@5 {
|
||||
compatible = "ethernet-phy-id67c9.de0a";
|
||||
reg = <5>;
|
||||
reset-gpios = <&pio 6 GPIO_ACTIVE_LOW>;
|
||||
reset-assert-us = <50000>;
|
||||
reset-deassert-us = <20000>;
|
||||
mxl,led-config = <0x0 0x0 0x0 0x3f0>;
|
||||
};
|
||||
|
||||
phy6: phy@6 {
|
||||
compatible = "ethernet-phy-id67c9.de0a";
|
||||
reg = <6>;
|
||||
mxl,led-config = <0x0 0x0 0x0 0x3f0>;
|
||||
};
|
||||
|
||||
switch: switch@0 {
|
||||
compatible = "mediatek,mt7531";
|
||||
reg = <31>;
|
||||
reset-gpios = <&pio 5 GPIO_ACTIVE_HIGH>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <1>;
|
||||
interrupt-parent = <&pio>;
|
||||
interrupts = <66 IRQ_TYPE_LEVEL_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
&switch {
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@1 {
|
||||
reg = <0>;
|
||||
label = "lan2";
|
||||
};
|
||||
|
||||
port@3 {
|
||||
reg = <3>;
|
||||
label = "lan3";
|
||||
};
|
||||
|
||||
port@4 {
|
||||
reg = <4>;
|
||||
label = "lan4";
|
||||
};
|
||||
|
||||
port@5 {
|
||||
reg = <5>;
|
||||
label = "lan1";
|
||||
phy-mode = "2500base-x";
|
||||
fixed-link {
|
||||
speed = <2500>;
|
||||
full-duplex;
|
||||
pause;
|
||||
};
|
||||
};
|
||||
|
||||
port@6 {
|
||||
reg = <6>;
|
||||
label = "cpu";
|
||||
ethernet = <&gmac0>;
|
||||
phy-mode = "2500base-x";
|
||||
|
||||
fixed-link {
|
||||
speed = <2500>;
|
||||
full-duplex;
|
||||
pause;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&xhci {
|
||||
vusb33-supply = <®_3p3v>;
|
||||
vbus-supply = <&usb_vbus>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&hnat {
|
||||
mtketh-wan = "eth1";
|
||||
mtketh-lan = "lan";
|
||||
mtketh-max-gmac = <2>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pio {
|
||||
spi_flash_pins: spi-flash-pins-33-to-38 {
|
||||
mux {
|
||||
function = "flash";
|
||||
groups = "spi0", "spi0_wp_hold";
|
||||
};
|
||||
conf-pu {
|
||||
pins = "SPI2_CS", "SPI2_HOLD", "SPI2_WP";
|
||||
drive-strength = <8>;
|
||||
mediatek,pull-up-adv = <0>;
|
||||
};
|
||||
conf-pd {
|
||||
pins = "SPI2_CLK", "SPI2_MOSI", "SPI2_MISO";
|
||||
drive-strength = <8>;
|
||||
mediatek,pull-down-adv = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
wf_2g_5g_pins: wf_2g_5g-pins {
|
||||
mux {
|
||||
function = "wifi";
|
||||
groups = "wf_2g", "wf_5g";
|
||||
};
|
||||
conf {
|
||||
pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4",
|
||||
"WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6",
|
||||
"WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10",
|
||||
"WF0_TOP_CLK", "WF0_TOP_DATA", "WF1_HB1",
|
||||
"WF1_HB2", "WF1_HB3", "WF1_HB4", "WF1_HB0",
|
||||
"WF1_HB5", "WF1_HB6", "WF1_HB7", "WF1_HB8",
|
||||
"WF1_TOP_CLK", "WF1_TOP_DATA";
|
||||
drive-strength = <MTK_DRIVE_4mA>;
|
||||
};
|
||||
};
|
||||
|
||||
wf_dbdc_pins: wf_dbdc-pins {
|
||||
mux {
|
||||
function = "wifi";
|
||||
groups = "wf_dbdc";
|
||||
};
|
||||
conf {
|
||||
pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4",
|
||||
"WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6",
|
||||
"WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10",
|
||||
"WF0_TOP_CLK", "WF0_TOP_DATA", "WF1_HB1",
|
||||
"WF1_HB2", "WF1_HB3", "WF1_HB4", "WF1_HB0",
|
||||
"WF1_HB5", "WF1_HB6", "WF1_HB7", "WF1_HB8",
|
||||
"WF1_TOP_CLK", "WF1_TOP_DATA";
|
||||
drive-strength = <MTK_DRIVE_4mA>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pcie0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pcie0_pins>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&spi0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&spi_flash_pins>;
|
||||
status = "okay";
|
||||
cs-gpios = <0>, <0>;
|
||||
spi_nand: spi_nand@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "spi-nand";
|
||||
reg = <1>;
|
||||
spi-max-frequency = <20000000>;
|
||||
spi-tx-buswidth = <4>;
|
||||
spi-rx-buswidth = <4>;
|
||||
};
|
||||
};
|
||||
|
||||
&wbsys {
|
||||
status = "okay";
|
||||
mediatek,mtd-eeprom = <&Factory 0x0000>;
|
||||
};
|
||||
|
||||
&spi1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&spic_pins_g1>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
|
||||
&watchdog {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c_pins>;
|
||||
status = "okay";
|
||||
|
||||
wm8960: wm8960@1a {
|
||||
compatible = "wlf,wm8960";
|
||||
reg = <0x1a>;
|
||||
};
|
||||
};
|
||||
|
||||
&auxadc {
|
||||
status = "okay";
|
||||
};
|
||||
@ -168,13 +168,13 @@
|
||||
};
|
||||
|
||||
port@3 {
|
||||
reg = <2>;
|
||||
reg = <3>;
|
||||
label = "lan2";
|
||||
};
|
||||
|
||||
|
||||
port@4 {
|
||||
reg = <3>;
|
||||
reg = <4>;
|
||||
label = "lan3";
|
||||
};
|
||||
|
||||
|
||||
@ -0,0 +1,358 @@
|
||||
/dts-v1/;
|
||||
#include "mt7986a.dtsi"
|
||||
#include "mt7986a-pinctrl.dtsi"
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/leds/common.h>
|
||||
|
||||
/ {
|
||||
model = "Zyxel EX5700";
|
||||
compatible = "zyxel,ex5700", "mediatek,mt7986a";
|
||||
|
||||
chosen {
|
||||
bootargs = "console=ttyS0,115200n1 loglevel=8 \
|
||||
earlycon=uart8250,mmio32,0x11002000";
|
||||
};
|
||||
|
||||
aliases {
|
||||
led-boot = &led_status_green;
|
||||
led-failsafe = &led_status_green;
|
||||
led-running = &led_status_green;
|
||||
led-upgrade = &led_status_amber;
|
||||
};
|
||||
|
||||
memory {
|
||||
reg = <0 0x40000000 0 0x40000000>;
|
||||
};
|
||||
|
||||
|
||||
|
||||
gpio-keys {
|
||||
compatible = "gpio-keys";
|
||||
poll-interval = <20>;
|
||||
|
||||
reset-button {
|
||||
label = "reset";
|
||||
gpios = <&pio 9 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RESTART>;
|
||||
};
|
||||
|
||||
wps-button {
|
||||
label = "wps";
|
||||
gpios = <&pio 10 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_WPS_BUTTON>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
red1 {
|
||||
label = "red:net";
|
||||
gpios = <&pio 23 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
green1 {
|
||||
label = "green:net";
|
||||
gpios = <&pio 25 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
amber1 {
|
||||
label = "amber:net";
|
||||
gpios = <&pio 29 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
white2 {
|
||||
label = "white:status";
|
||||
gpios = <&pio 16 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
red2 {
|
||||
label = "red:status";
|
||||
gpios = <&pio 17 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
led_status_green: green2 {
|
||||
label = "green:status";
|
||||
gpios = <&pio 31 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
led_status_amber: amber2 {
|
||||
label = "amber:status";
|
||||
gpios = <&pio 18 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
nmbm_spim_nand {
|
||||
compatible = "generic,nmbm";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
lower-mtd-device = <&spi_nand>;
|
||||
forced-create;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "BL2";
|
||||
reg = <0x00 0x100000>;
|
||||
};
|
||||
|
||||
partition@100000 {
|
||||
label = "u-boot-env";
|
||||
reg = <0x100000 0x80000>;
|
||||
};
|
||||
|
||||
partition@180000 {
|
||||
label = "Factory";
|
||||
reg = <0x180000 0x200000>;
|
||||
};
|
||||
|
||||
partition@380000 {
|
||||
label = "FIP";
|
||||
reg = <0x380000 0x200000>;
|
||||
};
|
||||
|
||||
partition@580000 {
|
||||
label = "ubi";
|
||||
reg = <0x00580000 0x1da80000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
reg_3p3v: regulator-3p3v {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "fixed-3.3V";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
usb_vbus: regulator-usb-vbus {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "usb_vbus";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
enable-active-high;
|
||||
regulator-boot-on;
|
||||
};
|
||||
};
|
||||
|
||||
&uart0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&watchdog {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
ð {
|
||||
status = "okay";
|
||||
|
||||
gmac0: mac@0 {
|
||||
compatible = "mediatek,eth-mac";
|
||||
reg = <0>;
|
||||
phy-mode = "2500base-x";
|
||||
|
||||
fixed-link {
|
||||
speed = <2500>;
|
||||
full-duplex;
|
||||
pause;
|
||||
};
|
||||
};
|
||||
|
||||
gmac1: mac@1 {
|
||||
label = "wan";
|
||||
compatible = "mediatek,eth-mac";
|
||||
reg = <1>;
|
||||
phy-mode = "2500base-x";
|
||||
|
||||
fixed-link {
|
||||
speed = <2500>;
|
||||
full-duplex;
|
||||
pause;
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
mdio: mdio-bus {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
phy5: phy@5 {
|
||||
compatible = "ethernet-phy-id67c9.de0a";
|
||||
phy-mode = "2500base-x";
|
||||
reset-gpios = <&pio 6 GPIO_ACTIVE_LOW>;
|
||||
reset-assert-us = <50000>;
|
||||
reset-deassert-us = <20000>;
|
||||
maxlinear,led-reg = <0x3c0 0x330 0x0 0x0>;
|
||||
reg = <5>;
|
||||
};
|
||||
|
||||
phy6: phy@6 {
|
||||
compatible = "ethernet-phy-id67c9.de0a";
|
||||
phy-mode = "2500base-x";
|
||||
maxlinear,led-reg = <0x3c0 0x330 0x0 0x0>;
|
||||
reg = <6>;
|
||||
};
|
||||
|
||||
switch@0 {
|
||||
compatible = "mediatek,mt7531";
|
||||
reg = <31>;
|
||||
reset-gpios = <&pio 5 0>;
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
label = "lan3";
|
||||
};
|
||||
|
||||
port@1 {
|
||||
reg = <1>;
|
||||
label = "lan2";
|
||||
};
|
||||
|
||||
port@2 {
|
||||
reg = <2>;
|
||||
label = "lan1";
|
||||
};
|
||||
|
||||
|
||||
port@5 {
|
||||
reg = <5>;
|
||||
label = "lan4";
|
||||
phy-mode = "2500base-x";
|
||||
fixed-link {
|
||||
speed = <2500>;
|
||||
full-duplex;
|
||||
pause;
|
||||
};
|
||||
};
|
||||
|
||||
port@6 {
|
||||
reg = <6>;
|
||||
label = "cpu";
|
||||
ethernet = <&gmac0>;
|
||||
phy-mode = "2500base-x";
|
||||
|
||||
fixed-link {
|
||||
speed = <2500>;
|
||||
full-duplex;
|
||||
pause;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
};
|
||||
};
|
||||
|
||||
|
||||
&xhci {
|
||||
vusb33-supply = <®_3p3v>;
|
||||
vbus-supply = <&usb_vbus>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&hnat {
|
||||
mtketh-wan = "eth1";
|
||||
mtketh-lan = "eth0";
|
||||
mtketh-max-gmac = <2>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pcie0_pins>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&wbsys {
|
||||
status = "okay";
|
||||
pinctrl-names = "default", "dbdc";
|
||||
pinctrl-0 = <&wf_2g_5g_pins>;
|
||||
pinctrl-1 = <&wf_dbdc_pins>;
|
||||
};
|
||||
|
||||
&spi0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&spi_flash_pins>;
|
||||
status = "okay";
|
||||
cs-gpios = <0>, <0>;
|
||||
|
||||
spi_nand: spi_nand@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "spi-nand";
|
||||
reg = <1>;
|
||||
spi-max-frequency = <52000000>;
|
||||
spi-tx-bus-width = <4>;
|
||||
spi-rx-bus-width = <4>;
|
||||
spi-cal-enable;
|
||||
spi-cal-mode = "read-data";
|
||||
spi-cal-datalen = <7>;
|
||||
spi-cal-data = /bits/ 8 <0x53 0x50 0x49 0x4E 0x41 0x4E 0x44>; /* 'SPINAND' */
|
||||
spi-cal-addrlen = <5>;
|
||||
spi-cal-addr = /bits/ 32 <0x0 0x0 0x0 0x0 0x0>;
|
||||
};
|
||||
};
|
||||
|
||||
&pio {
|
||||
spi_flash_pins: spi-flash-pins-33-to-38 {
|
||||
mux {
|
||||
function = "flash";
|
||||
groups = "spi0", "spi0_wp_hold";
|
||||
};
|
||||
conf-pu {
|
||||
pins = "SPI2_CS", "SPI2_HOLD", "SPI2_WP";
|
||||
drive-strength = <8>;
|
||||
mediatek,pull-up-adv = <0>;
|
||||
};
|
||||
conf-pd {
|
||||
pins = "SPI2_CLK", "SPI2_MOSI", "SPI2_MISO";
|
||||
drive-strength = <8>;
|
||||
mediatek,pull-down-adv = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
wf_2g_5g_pins: wf_2g_5g-pins {
|
||||
mux {
|
||||
function = "wifi";
|
||||
groups = "wf_2g", "wf_5g";
|
||||
};
|
||||
conf {
|
||||
pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4",
|
||||
"WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6",
|
||||
"WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10",
|
||||
"WF0_TOP_CLK", "WF0_TOP_DATA", "WF1_HB1",
|
||||
"WF1_HB2", "WF1_HB3", "WF1_HB4", "WF1_HB0",
|
||||
"WF1_HB5", "WF1_HB6", "WF1_HB7", "WF1_HB8",
|
||||
"WF1_TOP_CLK", "WF1_TOP_DATA";
|
||||
drive-strength = <MTK_DRIVE_4mA>;
|
||||
};
|
||||
};
|
||||
|
||||
wf_dbdc_pins: wf_dbdc-pins {
|
||||
mux {
|
||||
function = "wifi";
|
||||
groups = "wf_dbdc";
|
||||
};
|
||||
conf {
|
||||
pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4",
|
||||
"WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6",
|
||||
"WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10",
|
||||
"WF0_TOP_CLK", "WF0_TOP_DATA", "WF1_HB1",
|
||||
"WF1_HB2", "WF1_HB3", "WF1_HB4", "WF1_HB0",
|
||||
"WF1_HB5", "WF1_HB6", "WF1_HB7", "WF1_HB8",
|
||||
"WF1_TOP_CLK", "WF1_TOP_DATA";
|
||||
drive-strength = <MTK_DRIVE_4mA>;
|
||||
};
|
||||
};
|
||||
};
|
||||
@ -511,6 +511,23 @@ define Device/netcore_n60
|
||||
endef
|
||||
TARGET_DEVICES += netcore_n60
|
||||
|
||||
define Device/netcore_n60-pro
|
||||
DEVICE_VENDOR := Netcore
|
||||
DEVICE_MODEL := N60 PRO
|
||||
DEVICE_DTS := mt7986a-netcore-n60-pro
|
||||
DEVICE_DTS_DIR := $(DTS_DIR)/mediatek
|
||||
SUPPORTED_DEVICES := netcore,n60-pro
|
||||
DEVICE_PACKAGES := kmod-usb3 kmod-mt7986-firmware mt7986-wo-firmware
|
||||
UBINIZE_OPTS := -E 5
|
||||
BLOCKSIZE := 128k
|
||||
PAGESIZE := 2048
|
||||
KERNEL_IN_UBI := 1
|
||||
IMAGES += factory.bin
|
||||
IMAGE/factory.bin := append-ubi | check-size $$$$(IMAGE_SIZE)
|
||||
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
||||
endef
|
||||
TARGET_DEVICES += netcore_n60-pro
|
||||
|
||||
define Device/glinet_gl-mt6000
|
||||
DEVICE_VENDOR := GL.iNet
|
||||
DEVICE_MODEL := GL-MT6000
|
||||
@ -547,3 +564,21 @@ define Device/tplink_tl-xdr6088
|
||||
$(call Device/tplink_tl-common)
|
||||
endef
|
||||
TARGET_DEVICES += tplink_tl-xdr6088
|
||||
|
||||
define Device/zyxel_ex5700
|
||||
DEVICE_VENDOR := Zyxel
|
||||
DEVICE_MODEL := EX5700
|
||||
DEVICE_DTS := mt7986a-zyxel-ex5700
|
||||
SUPPORTED_DEVICES := zyxel,ex5700
|
||||
DEVICE_DTS_DIR := $(DTS_DIR)/mediatek
|
||||
DEVICE_PACKAGES := $(MT7986_USB_PKGS)
|
||||
UBINIZE_OPTS := -E 5
|
||||
BLOCKSIZE := 256k
|
||||
PAGESIZE := 4096
|
||||
IMAGE_SIZE := 65536k
|
||||
KERNEL_IN_UBI := 1
|
||||
IMAGES += factory.bin
|
||||
IMAGE/factory.bin := append-ubi | check-size $$$$(IMAGE_SIZE)
|
||||
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
||||
endef
|
||||
TARGET_DEVICES += zyxel_ex5700
|
||||
|
||||
@ -29,9 +29,13 @@ mediatek_setup_interfaces()
|
||||
ruijie,rg-x60-pro*)
|
||||
ucidef_set_interfaces_lan_wan "lan0 lan1 lan2 lan3" wan
|
||||
;;
|
||||
netcore,n60-pro)
|
||||
ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" wan
|
||||
;;
|
||||
glinet,gl-mt6000)
|
||||
ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4 lan5" wan
|
||||
;;
|
||||
zyxel,ex5700|\
|
||||
jdcloud,re-cp-03)
|
||||
ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" wan
|
||||
;;
|
||||
@ -56,9 +60,15 @@ mediatek_setup_macs()
|
||||
|
||||
case $board in
|
||||
*netcore,n60*)
|
||||
wifi_mac=$(mtd_get_mac_binary $part_name 4)
|
||||
wifi_mac=$(mtd_get_mac_binary $part_name 0x1fef20)
|
||||
lan_mac="$(macaddr_add $wifi_mac -1)"
|
||||
wan_mac="$(macaddr_add $wifi_mac -2)"
|
||||
sed -i '/MacAddress=$wifi_mac/d' /etc/wireless/mediatek/mt7986.dbdc.b0.dat
|
||||
echo "MacAddress=$wifi_mac" >> /etc/wireless/mediatek/mt7986.dbdc.b0.dat
|
||||
wifi_mac="$(macaddr_add $wifi_mac 1)"
|
||||
sed -i '/MacAddress=$wifi_mac/d' /etc/wireless/mediatek/mt7986.dbdc.b1.dat
|
||||
echo "MacAddress=$wifi_mac" >> /etc/wireless/mediatek/mt7986.dbdc.b1.dat
|
||||
|
||||
;;
|
||||
glinet,gl-mt6000)
|
||||
label_mac=$(mmc_get_mac_binary factory 0x0a)
|
||||
|
||||
@ -148,8 +148,10 @@ platform_do_upgrade() {
|
||||
xiaomi,redmi-router-ax6000 |\
|
||||
bananapi,bpi-r3mini |\
|
||||
netcore,n60|\
|
||||
netcore,n60-pro |\
|
||||
tplink,tl-xdr608*|\
|
||||
ruijie,rg-x60-pro*|\
|
||||
zyxel,ex5700 |\
|
||||
*snand*)
|
||||
nand_do_upgrade "$1"
|
||||
;;
|
||||
@ -179,11 +181,13 @@ platform_check_image() {
|
||||
xiaomi,redmi-router-ax6000* |\
|
||||
bananapi,bpi-r3mini* |\
|
||||
netcore,n60|\
|
||||
netcore,n60-pro |\
|
||||
ruijie,rg-x60-pro*|\
|
||||
*snand* |\
|
||||
glinet,gl-mt6000|\
|
||||
jdcloud,re-cp-03|\
|
||||
tplink,tl-xdr608*|\
|
||||
zyxel,ex5700 |\
|
||||
*emmc*)
|
||||
# tar magic `ustar`
|
||||
magic="$(dd if="$1" bs=1 skip=257 count=5 2>/dev/null)"
|
||||
|
||||
Loading…
x
Reference in New Issue
Block a user