Merge Official Source

Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>

package/network/services/hostapd/Makefile

@@ -5,7 +5,7 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=hostapd
-PKG_RELEASE:=3
+PKG_RELEASE:=4
 
 PKG_SOURCE_URL:=http://w1.fi/hostap.git
 PKG_SOURCE_PROTO:=git

target/linux/generic/backport-5.15/798-net-next-net-sfp-add-quirk-for-Fiberstone-GPON-ONU-34-20BI.patch

@@ -0,0 +1,34 @@
+From d387e34fec407f881fdf165b5d7ec128ebff362f Mon Sep 17 00:00:00 2001
+From: Christian Marangi <ansuelsmth@gmail.com>
+Date: Tue, 19 Sep 2023 14:47:20 +0200
+Subject: [PATCH] net: sfp: add quirk for Fiberstone GPON-ONU-34-20BI
+
+Fiberstone GPON-ONU-34-20B can operate at 2500base-X, but report 1.2GBd
+NRZ in their EEPROM.
+
+The module also require the ignore tx fault fixup similar to Huawei MA5671A
+as it gets disabled on error messages with serial redirection enabled.
+
+Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
+Link: https://lore.kernel.org/r/20230919124720.8210-1-ansuelsmth@gmail.com
+Signed-off-by: Paolo Abeni <pabeni@redhat.com>
+---
+ drivers/net/phy/sfp.c | 5 +++++
+ 1 file changed, 5 insertions(+)
+
+--- a/drivers/net/phy/sfp.c
++++ b/drivers/net/phy/sfp.c
+@@ -368,6 +368,13 @@ static const struct sfp_quirk sfp_quirks
+ 		.modes = sfp_quirk_2500basex,
+ 		.fixup = sfp_fixup_long_startup,
+ 	}, {
++		// Fiberstore GPON-ONU-34-20BI can operate at 2500base-X, but report 1.2GBd
++		// NRZ in their EEPROM
++		.vendor = "FS",
++		.part = "GPON-ONU-34-20BI",
++		.modes = sfp_quirk_2500basex,
++		.fixup = sfp_fixup_ignore_tx_fault,
++	}, {
+ 		.vendor = "HALNy",
+ 		.part = "HL-GSFP",
+ 		.fixup = sfp_fixup_halny_gsfp,

target/linux/generic/backport-6.1/701-net-next-net-sfp-add-quirk-for-Fiberstone-GPON-ONU-34-20BI.patch

@@ -0,0 +1,32 @@
+From d387e34fec407f881fdf165b5d7ec128ebff362f Mon Sep 17 00:00:00 2001
+From: Christian Marangi <ansuelsmth@gmail.com>
+Date: Tue, 19 Sep 2023 14:47:20 +0200
+Subject: [PATCH] net: sfp: add quirk for Fiberstone GPON-ONU-34-20BI
+
+Fiberstone GPON-ONU-34-20B can operate at 2500base-X, but report 1.2GBd
+NRZ in their EEPROM.
+
+The module also require the ignore tx fault fixup similar to Huawei MA5671A
+as it gets disabled on error messages with serial redirection enabled.
+
+Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
+Link: https://lore.kernel.org/r/20230919124720.8210-1-ansuelsmth@gmail.com
+Signed-off-by: Paolo Abeni <pabeni@redhat.com>
+---
+ drivers/net/phy/sfp.c | 5 +++++
+ 1 file changed, 5 insertions(+)
+
+--- a/drivers/net/phy/sfp.c
++++ b/drivers/net/phy/sfp.c
+@@ -393,6 +393,11 @@ static const struct sfp_quirk sfp_quirks
+ 	SFP_QUIRK("ALCATELLUCENT", "3FE46541AA", sfp_quirk_2500basex,
+ 		  sfp_fixup_long_startup),
+ 
++	// Fiberstore GPON-ONU-34-20BI can operate at 2500base-X, but report 1.2GBd
++	// NRZ in their EEPROM
++	SFP_QUIRK("FS", "GPON-ONU-34-20BI", sfp_quirk_2500basex,
++		  sfp_fixup_ignore_tx_fault),
++
+ 	SFP_QUIRK_F("HALNy", "HL-GSFP", sfp_fixup_halny_gsfp),
+ 
+ 	// HG MXPD-483II-F 2.5G supports 2500Base-X, but incorrectly reports

target/linux/generic/backport-6.1/778-v6.3-01-net-dsa-qca8k-add-QCA8K_ATU_TABLE_SIZE-define-for-fd.patch

@@ -0,0 +1,63 @@
+From e03cea60c3db8c6b011cc36ecef9281dff8377f3 Mon Sep 17 00:00:00 2001
+From: Christian Marangi <ansuelsmth@gmail.com>
+Date: Wed, 25 Jan 2023 21:35:16 +0100
+Subject: [PATCH] net: dsa: qca8k: add QCA8K_ATU_TABLE_SIZE define for fdb
+ access
+
+Add and use QCA8K_ATU_TABLE_SIZE instead of hardcoding the ATU size with
+a pure number and using sizeof on the array.
+
+Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+---
+ drivers/net/dsa/qca/qca8k-common.c | 10 ++++++----
+ drivers/net/dsa/qca/qca8k.h        |  2 ++
+ 2 files changed, 8 insertions(+), 4 deletions(-)
+
+--- a/drivers/net/dsa/qca/qca8k-common.c
++++ b/drivers/net/dsa/qca/qca8k-common.c
+@@ -150,11 +150,12 @@ static int qca8k_busy_wait(struct qca8k_
+ 
+ static int qca8k_fdb_read(struct qca8k_priv *priv, struct qca8k_fdb *fdb)
+ {
+-	u32 reg[3];
++	u32 reg[QCA8K_ATU_TABLE_SIZE];
+ 	int ret;
+ 
+ 	/* load the ARL table into an array */
+-	ret = qca8k_bulk_read(priv, QCA8K_REG_ATU_DATA0, reg, sizeof(reg));
++	ret = qca8k_bulk_read(priv, QCA8K_REG_ATU_DATA0, reg,
++			      QCA8K_ATU_TABLE_SIZE * sizeof(u32));
+ 	if (ret)
+ 		return ret;
+ 
+@@ -178,7 +179,7 @@ static int qca8k_fdb_read(struct qca8k_p
+ static void qca8k_fdb_write(struct qca8k_priv *priv, u16 vid, u8 port_mask,
+ 			    const u8 *mac, u8 aging)
+ {
+-	u32 reg[3] = { 0 };
++	u32 reg[QCA8K_ATU_TABLE_SIZE] = { 0 };
+ 
+ 	/* vid - 83:72 */
+ 	reg[2] = FIELD_PREP(QCA8K_ATU_VID_MASK, vid);
+@@ -195,7 +196,8 @@ static void qca8k_fdb_write(struct qca8k
+ 	reg[0] |= FIELD_PREP(QCA8K_ATU_ADDR5_MASK, mac[5]);
+ 
+ 	/* load the array into the ARL table */
+-	qca8k_bulk_write(priv, QCA8K_REG_ATU_DATA0, reg, sizeof(reg));
++	qca8k_bulk_write(priv, QCA8K_REG_ATU_DATA0, reg,
++			 QCA8K_ATU_TABLE_SIZE * sizeof(u32));
+ }
+ 
+ static int qca8k_fdb_access(struct qca8k_priv *priv, enum qca8k_fdb_cmd cmd,
+--- a/drivers/net/dsa/qca/qca8k.h
++++ b/drivers/net/dsa/qca/qca8k.h
+@@ -148,6 +148,8 @@
+ #define QCA8K_REG_IPV4_PRI_ADDR_MASK			0x474
+ 
+ /* Lookup registers */
++#define QCA8K_ATU_TABLE_SIZE				3 /* 12 bytes wide table / sizeof(u32) */
++
+ #define QCA8K_REG_ATU_DATA0				0x600
+ #define   QCA8K_ATU_ADDR2_MASK				GENMASK(31, 24)
+ #define   QCA8K_ATU_ADDR3_MASK				GENMASK(23, 16)

target/linux/generic/backport-6.1/778-v6.3-02-net-dsa-qca8k-convert-to-regmap-read-write-API.patch

@@ -0,0 +1,261 @@
+From c766e077d927e1775902c18827205ea2ade3a35d Mon Sep 17 00:00:00 2001
+From: Christian Marangi <ansuelsmth@gmail.com>
+Date: Wed, 25 Jan 2023 21:35:17 +0100
+Subject: [PATCH] net: dsa: qca8k: convert to regmap read/write API
+
+Convert qca8k to regmap read/write bulk API. The mgmt eth can write up
+to 32 bytes of data at times. Currently we use a custom function to do
+it but regmap now supports declaration of read/write bulk even without a
+bus.
+
+Drop the custom function and rework the regmap function to this new
+implementation.
+
+Rework the qca8k_fdb_read/write function to use the new
+regmap_bulk_read/write as the old qca8k_bulk_read/write are now dropped.
+
+Cc: Mark Brown <broonie@kernel.org>
+Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+---
+ drivers/net/dsa/qca/qca8k-8xxx.c   | 92 ++++++++++++++++++++++++------
+ drivers/net/dsa/qca/qca8k-common.c | 47 ++-------------
+ drivers/net/dsa/qca/qca8k.h        |  3 -
+ 3 files changed, 77 insertions(+), 65 deletions(-)
+
+--- a/drivers/net/dsa/qca/qca8k-8xxx.c
++++ b/drivers/net/dsa/qca/qca8k-8xxx.c
+@@ -425,16 +425,12 @@ qca8k_regmap_update_bits_eth(struct qca8
+ }
+ 
+ static int
+-qca8k_regmap_read(void *ctx, uint32_t reg, uint32_t *val)
++qca8k_read_mii(struct qca8k_priv *priv, uint32_t reg, uint32_t *val)
+ {
+-	struct qca8k_priv *priv = (struct qca8k_priv *)ctx;
+ 	struct mii_bus *bus = priv->bus;
+ 	u16 r1, r2, page;
+ 	int ret;
+ 
+-	if (!qca8k_read_eth(priv, reg, val, sizeof(*val)))
+-		return 0;
+-
+ 	qca8k_split_addr(reg, &r1, &r2, &page);
+ 
+ 	mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED);
+@@ -451,16 +447,12 @@ exit:
+ }
+ 
+ static int
+-qca8k_regmap_write(void *ctx, uint32_t reg, uint32_t val)
++qca8k_write_mii(struct qca8k_priv *priv, uint32_t reg, uint32_t val)
+ {
+-	struct qca8k_priv *priv = (struct qca8k_priv *)ctx;
+ 	struct mii_bus *bus = priv->bus;
+ 	u16 r1, r2, page;
+ 	int ret;
+ 
+-	if (!qca8k_write_eth(priv, reg, &val, sizeof(val)))
+-		return 0;
+-
+ 	qca8k_split_addr(reg, &r1, &r2, &page);
+ 
+ 	mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED);
+@@ -477,17 +469,14 @@ exit:
+ }
+ 
+ static int
+-qca8k_regmap_update_bits(void *ctx, uint32_t reg, uint32_t mask, uint32_t write_val)
++qca8k_regmap_update_bits_mii(struct qca8k_priv *priv, uint32_t reg,
++			     uint32_t mask, uint32_t write_val)
+ {
+-	struct qca8k_priv *priv = (struct qca8k_priv *)ctx;
+ 	struct mii_bus *bus = priv->bus;
+ 	u16 r1, r2, page;
+ 	u32 val;
+ 	int ret;
+ 
+-	if (!qca8k_regmap_update_bits_eth(priv, reg, mask, write_val))
+-		return 0;
+-
+ 	qca8k_split_addr(reg, &r1, &r2, &page);
+ 
+ 	mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED);
+@@ -510,17 +499,84 @@ exit:
+ 	return ret;
+ }
+ 
++static int
++qca8k_bulk_read(void *ctx, const void *reg_buf, size_t reg_len,
++		void *val_buf, size_t val_len)
++{
++	int i, count = val_len / sizeof(u32), ret;
++	u32 reg = *(u32 *)reg_buf & U16_MAX;
++	struct qca8k_priv *priv = ctx;
++
++	if (priv->mgmt_master &&
++	    !qca8k_read_eth(priv, reg, val_buf, val_len))
++		return 0;
++
++	/* loop count times and increment reg of 4 */
++	for (i = 0; i < count; i++, reg += sizeof(u32)) {
++		ret = qca8k_read_mii(priv, reg, val_buf + i);
++		if (ret < 0)
++			return ret;
++	}
++
++	return 0;
++}
++
++static int
++qca8k_bulk_gather_write(void *ctx, const void *reg_buf, size_t reg_len,
++			const void *val_buf, size_t val_len)
++{
++	int i, count = val_len / sizeof(u32), ret;
++	u32 reg = *(u32 *)reg_buf & U16_MAX;
++	struct qca8k_priv *priv = ctx;
++	u32 *val = (u32 *)val_buf;
++
++	if (priv->mgmt_master &&
++	    !qca8k_write_eth(priv, reg, val, val_len))
++		return 0;
++
++	/* loop count times, increment reg of 4 and increment val ptr to
++	 * the next value
++	 */
++	for (i = 0; i < count; i++, reg += sizeof(u32), val++) {
++		ret = qca8k_write_mii(priv, reg, *val);
++		if (ret < 0)
++			return ret;
++	}
++
++	return 0;
++}
++
++static int
++qca8k_bulk_write(void *ctx, const void *data, size_t bytes)
++{
++	return qca8k_bulk_gather_write(ctx, data, sizeof(u16), data + sizeof(u16),
++				       bytes - sizeof(u16));
++}
++
++static int
++qca8k_regmap_update_bits(void *ctx, uint32_t reg, uint32_t mask, uint32_t write_val)
++{
++	struct qca8k_priv *priv = ctx;
++
++	if (!qca8k_regmap_update_bits_eth(priv, reg, mask, write_val))
++		return 0;
++
++	return qca8k_regmap_update_bits_mii(priv, reg, mask, write_val);
++}
++
+ static struct regmap_config qca8k_regmap_config = {
+ 	.reg_bits = 16,
+ 	.val_bits = 32,
+ 	.reg_stride = 4,
+ 	.max_register = 0x16ac, /* end MIB - Port6 range */
+-	.reg_read = qca8k_regmap_read,
+-	.reg_write = qca8k_regmap_write,
++	.read = qca8k_bulk_read,
++	.write = qca8k_bulk_write,
+ 	.reg_update_bits = qca8k_regmap_update_bits,
+ 	.rd_table = &qca8k_readable_table,
+ 	.disable_locking = true, /* Locking is handled by qca8k read/write */
+ 	.cache_type = REGCACHE_NONE, /* Explicitly disable CACHE */
++	.max_raw_read = 32, /* mgmt eth can read/write up to 8 registers at time */
++	.max_raw_write = 32,
+ };
+ 
+ static int
+@@ -2091,8 +2147,6 @@ static SIMPLE_DEV_PM_OPS(qca8k_pm_ops,
+ 
+ static const struct qca8k_info_ops qca8xxx_ops = {
+ 	.autocast_mib = qca8k_get_ethtool_stats_eth,
+-	.read_eth = qca8k_read_eth,
+-	.write_eth = qca8k_write_eth,
+ };
+ 
+ static const struct qca8k_match_data qca8327 = {
+--- a/drivers/net/dsa/qca/qca8k-common.c
++++ b/drivers/net/dsa/qca/qca8k-common.c
+@@ -101,45 +101,6 @@ const struct regmap_access_table qca8k_r
+ 	.n_yes_ranges = ARRAY_SIZE(qca8k_readable_ranges),
+ };
+ 
+-/* TODO: remove these extra ops when we can support regmap bulk read/write */
+-static int qca8k_bulk_read(struct qca8k_priv *priv, u32 reg, u32 *val, int len)
+-{
+-	int i, count = len / sizeof(u32), ret;
+-
+-	if (priv->mgmt_master && priv->info->ops->read_eth &&
+-	    !priv->info->ops->read_eth(priv, reg, val, len))
+-		return 0;
+-
+-	for (i = 0; i < count; i++) {
+-		ret = regmap_read(priv->regmap, reg + (i * 4), val + i);
+-		if (ret < 0)
+-			return ret;
+-	}
+-
+-	return 0;
+-}
+-
+-/* TODO: remove these extra ops when we can support regmap bulk read/write */
+-static int qca8k_bulk_write(struct qca8k_priv *priv, u32 reg, u32 *val, int len)
+-{
+-	int i, count = len / sizeof(u32), ret;
+-	u32 tmp;
+-
+-	if (priv->mgmt_master && priv->info->ops->write_eth &&
+-	    !priv->info->ops->write_eth(priv, reg, val, len))
+-		return 0;
+-
+-	for (i = 0; i < count; i++) {
+-		tmp = val[i];
+-
+-		ret = regmap_write(priv->regmap, reg + (i * 4), tmp);
+-		if (ret < 0)
+-			return ret;
+-	}
+-
+-	return 0;
+-}
+-
+ static int qca8k_busy_wait(struct qca8k_priv *priv, u32 reg, u32 mask)
+ {
+ 	u32 val;
+@@ -154,8 +115,8 @@ static int qca8k_fdb_read(struct qca8k_p
+ 	int ret;
+ 
+ 	/* load the ARL table into an array */
+-	ret = qca8k_bulk_read(priv, QCA8K_REG_ATU_DATA0, reg,
+-			      QCA8K_ATU_TABLE_SIZE * sizeof(u32));
++	ret = regmap_bulk_read(priv->regmap, QCA8K_REG_ATU_DATA0, reg,
++			       QCA8K_ATU_TABLE_SIZE);
+ 	if (ret)
+ 		return ret;
+ 
+@@ -196,8 +157,8 @@ static void qca8k_fdb_write(struct qca8k
+ 	reg[0] |= FIELD_PREP(QCA8K_ATU_ADDR5_MASK, mac[5]);
+ 
+ 	/* load the array into the ARL table */
+-	qca8k_bulk_write(priv, QCA8K_REG_ATU_DATA0, reg,
+-			 QCA8K_ATU_TABLE_SIZE * sizeof(u32));
++	regmap_bulk_write(priv->regmap, QCA8K_REG_ATU_DATA0, reg,
++			  QCA8K_ATU_TABLE_SIZE);
+ }
+ 
+ static int qca8k_fdb_access(struct qca8k_priv *priv, enum qca8k_fdb_cmd cmd,
+--- a/drivers/net/dsa/qca/qca8k.h
++++ b/drivers/net/dsa/qca/qca8k.h
+@@ -330,9 +330,6 @@ struct qca8k_priv;
+ 
+ struct qca8k_info_ops {
+ 	int (*autocast_mib)(struct dsa_switch *ds, int port, u64 *data);
+-	/* TODO: remove these extra ops when we can support regmap bulk read/write */
+-	int (*read_eth)(struct qca8k_priv *priv, u32 reg, u32 *val, int len);
+-	int (*write_eth)(struct qca8k_priv *priv, u32 reg, u32 *val, int len);
+ };
+ 
+ struct qca8k_match_data {

target/linux/generic/backport-6.1/779-v6.5-net-dsa-qca8k-enable-use_single_write-for-qca8xxx.patch

@@ -0,0 +1,78 @@
+From 2c39dd025da489cf87d26469d9f5ff19715324a0 Mon Sep 17 00:00:00 2001
+From: Christian Marangi <ansuelsmth@gmail.com>
+Date: Mon, 24 Jul 2023 05:25:28 +0200
+Subject: [PATCH 1/4] net: dsa: qca8k: enable use_single_write for qca8xxx
+
+The qca8xxx switch supports 2 way to write reg values, a slow way using
+mdio and a fast way by sending specially crafted mgmt packet to
+read/write reg.
+
+The fast way can support up to 32 bytes of data as eth packet are used
+to send/receive.
+
+This correctly works for almost the entire regmap of the switch but with
+the use of some kernel selftests for dsa drivers it was found a funny
+and interesting hw defect/limitation.
+
+For some specific reg, bulk write won't work and will result in writing
+only part of the requested regs resulting in half data written. This was
+especially hard to track and discover due to the total strangeness of
+the problem and also by the specific regs where this occurs.
+
+This occurs in the specific regs of the ATU table, where multiple entry
+needs to be written to compose the entire entry.
+It was discovered that with a bulk write of 12 bytes on
+QCA8K_REG_ATU_DATA0 only QCA8K_REG_ATU_DATA0 and QCA8K_REG_ATU_DATA2
+were written, but QCA8K_REG_ATU_DATA1 was always zero.
+Tcpdump was used to make sure the specially crafted packet was correct
+and this was confirmed.
+
+The problem was hard to track as the lack of QCA8K_REG_ATU_DATA1
+resulted in an entry somehow possible as the first bytes of the mac
+address are set in QCA8K_REG_ATU_DATA0 and the entry type is set in
+QCA8K_REG_ATU_DATA2.
+
+Funlly enough writing QCA8K_REG_ATU_DATA1 results in the same problem
+with QCA8K_REG_ATU_DATA2 empty and QCA8K_REG_ATU_DATA1 and
+QCA8K_REG_ATU_FUNC correctly written.
+A speculation on the problem might be that there are some kind of
+indirection internally when accessing these regs and they can't be
+accessed all together, due to the fact that it's really a table mapped
+somewhere in the switch SRAM.
+
+Even more funny is the fact that every other reg was tested with all
+kind of combination and they are not affected by this problem. Read
+operation was also tested and always worked so it's not affected by this
+problem.
+
+The problem is not present if we limit writing a single reg at times.
+
+To handle this hardware defect, enable use_single_write so that bulk
+api can correctly split the write in multiple different operation
+effectively reverting to a non-bulk write.
+
+Cc: Mark Brown <broonie@kernel.org>
+Fixes: c766e077d927 ("net: dsa: qca8k: convert to regmap read/write API")
+Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
+Cc: stable@vger.kernel.org
+Signed-off-by: David S. Miller <davem@davemloft.net>
+---
+ drivers/net/dsa/qca/qca8k-8xxx.c | 7 +++++--
+ 1 file changed, 5 insertions(+), 2 deletions(-)
+
+--- a/drivers/net/dsa/qca/qca8k-8xxx.c
++++ b/drivers/net/dsa/qca/qca8k-8xxx.c
+@@ -575,8 +575,11 @@ static struct regmap_config qca8k_regmap
+ 	.rd_table = &qca8k_readable_table,
+ 	.disable_locking = true, /* Locking is handled by qca8k read/write */
+ 	.cache_type = REGCACHE_NONE, /* Explicitly disable CACHE */
+-	.max_raw_read = 32, /* mgmt eth can read/write up to 8 registers at time */
+-	.max_raw_write = 32,
++	.max_raw_read = 32, /* mgmt eth can read up to 8 registers at time */
++	/* ATU regs suffer from a bug where some data are not correctly
++	 * written. Disable bulk write to correctly write ATU entry.
++	 */
++	.use_single_write = true,
+ };
+ 
+ static int

target/linux/generic/backport-6.1/780-v6.6-01-net-dsa-qca8k-make-learning-configurable-and-keep-of.patch

@@ -0,0 +1,146 @@
+From 23cfc7172e5297d0bee49ac6f6f8248d1cf0820d Mon Sep 17 00:00:00 2001
+From: Christian Marangi <ansuelsmth@gmail.com>
+Date: Sun, 30 Jul 2023 09:41:10 +0200
+Subject: [PATCH 1/4] net: dsa: qca8k: make learning configurable and keep off
+ if standalone
+
+Address learning should initially be turned off by the driver for port
+operation in standalone mode, then the DSA core handles changes to it
+via ds->ops->port_bridge_flags().
+
+Currently this is not the case for qca8k where learning is enabled
+unconditionally in qca8k_setup for every user port.
+
+Handle ports configured in standalone mode by making the learning
+configurable and not enabling it by default.
+
+Implement .port_pre_bridge_flags and .port_bridge_flags dsa ops to
+enable learning for bridge that request it and tweak
+.port_stp_state_set to correctly disable learning when port is
+configured in standalone mode.
+
+Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
+Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
+Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
+Link: https://lore.kernel.org/r/20230730074113.21889-2-ansuelsmth@gmail.com
+Signed-off-by: Paolo Abeni <pabeni@redhat.com>
+---
+ drivers/net/dsa/qca/qca8k-8xxx.c   |  7 +++--
+ drivers/net/dsa/qca/qca8k-common.c | 48 ++++++++++++++++++++++++++++++
+ drivers/net/dsa/qca/qca8k.h        |  6 ++++
+ 3 files changed, 58 insertions(+), 3 deletions(-)
+
+--- a/drivers/net/dsa/qca/qca8k-8xxx.c
++++ b/drivers/net/dsa/qca/qca8k-8xxx.c
+@@ -1883,9 +1883,8 @@ qca8k_setup(struct dsa_switch *ds)
+ 			if (ret)
+ 				return ret;
+ 
+-			/* Enable ARP Auto-learning by default */
+-			ret = regmap_set_bits(priv->regmap, QCA8K_PORT_LOOKUP_CTRL(i),
+-					      QCA8K_PORT_LOOKUP_LEARN);
++			ret = regmap_clear_bits(priv->regmap, QCA8K_PORT_LOOKUP_CTRL(i),
++						QCA8K_PORT_LOOKUP_LEARN);
+ 			if (ret)
+ 				return ret;
+ 
+@@ -1991,6 +1990,8 @@ static const struct dsa_switch_ops qca8k
+ 	.port_change_mtu	= qca8k_port_change_mtu,
+ 	.port_max_mtu		= qca8k_port_max_mtu,
+ 	.port_stp_state_set	= qca8k_port_stp_state_set,
++	.port_pre_bridge_flags	= qca8k_port_pre_bridge_flags,
++	.port_bridge_flags	= qca8k_port_bridge_flags,
+ 	.port_bridge_join	= qca8k_port_bridge_join,
+ 	.port_bridge_leave	= qca8k_port_bridge_leave,
+ 	.port_fast_age		= qca8k_port_fast_age,
+--- a/drivers/net/dsa/qca/qca8k-common.c
++++ b/drivers/net/dsa/qca/qca8k-common.c
+@@ -565,9 +565,26 @@ int qca8k_get_mac_eee(struct dsa_switch
+ 	return 0;
+ }
+ 
++static int qca8k_port_configure_learning(struct dsa_switch *ds, int port,
++					 bool learning)
++{
++	struct qca8k_priv *priv = ds->priv;
++
++	if (learning)
++		return regmap_set_bits(priv->regmap,
++				       QCA8K_PORT_LOOKUP_CTRL(port),
++				       QCA8K_PORT_LOOKUP_LEARN);
++	else
++		return regmap_clear_bits(priv->regmap,
++					 QCA8K_PORT_LOOKUP_CTRL(port),
++					 QCA8K_PORT_LOOKUP_LEARN);
++}
++
+ void qca8k_port_stp_state_set(struct dsa_switch *ds, int port, u8 state)
+ {
++	struct dsa_port *dp = dsa_to_port(ds, port);
+ 	struct qca8k_priv *priv = ds->priv;
++	bool learning = false;
+ 	u32 stp_state;
+ 
+ 	switch (state) {
+@@ -582,8 +599,11 @@ void qca8k_port_stp_state_set(struct dsa
+ 		break;
+ 	case BR_STATE_LEARNING:
+ 		stp_state = QCA8K_PORT_LOOKUP_STATE_LEARNING;
++		learning = dp->learning;
+ 		break;
+ 	case BR_STATE_FORWARDING:
++		learning = dp->learning;
++		fallthrough;
+ 	default:
+ 		stp_state = QCA8K_PORT_LOOKUP_STATE_FORWARD;
+ 		break;
+@@ -591,6 +611,34 @@ void qca8k_port_stp_state_set(struct dsa
+ 
+ 	qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(port),
+ 		  QCA8K_PORT_LOOKUP_STATE_MASK, stp_state);
++
++	qca8k_port_configure_learning(ds, port, learning);
++}
++
++int qca8k_port_pre_bridge_flags(struct dsa_switch *ds, int port,
++				struct switchdev_brport_flags flags,
++				struct netlink_ext_ack *extack)
++{
++	if (flags.mask & ~BR_LEARNING)
++		return -EINVAL;
++
++	return 0;
++}
++
++int qca8k_port_bridge_flags(struct dsa_switch *ds, int port,
++			    struct switchdev_brport_flags flags,
++			    struct netlink_ext_ack *extack)
++{
++	int ret;
++
++	if (flags.mask & BR_LEARNING) {
++		ret = qca8k_port_configure_learning(ds, port,
++						    flags.val & BR_LEARNING);
++		if (ret)
++			return ret;
++	}
++
++	return 0;
+ }
+ 
+ int qca8k_port_bridge_join(struct dsa_switch *ds, int port,
+--- a/drivers/net/dsa/qca/qca8k.h
++++ b/drivers/net/dsa/qca/qca8k.h
+@@ -448,6 +448,12 @@ int qca8k_get_mac_eee(struct dsa_switch
+ 
+ /* Common bridge function */
+ void qca8k_port_stp_state_set(struct dsa_switch *ds, int port, u8 state);
++int qca8k_port_pre_bridge_flags(struct dsa_switch *ds, int port,
++				struct switchdev_brport_flags flags,
++				struct netlink_ext_ack *extack);
++int qca8k_port_bridge_flags(struct dsa_switch *ds, int port,
++			    struct switchdev_brport_flags flags,
++			    struct netlink_ext_ack *extack);
+ int qca8k_port_bridge_join(struct dsa_switch *ds, int port,
+ 			   struct dsa_bridge bridge,
+ 			   bool *tx_fwd_offload,

target/linux/generic/backport-6.1/780-v6.6-02-net-dsa-qca8k-limit-user-ports-access-to-the-first-C.patch

@@ -0,0 +1,53 @@
+From 18e8feae4a807994e4906d659116d249bfecd4c5 Mon Sep 17 00:00:00 2001
+From: Christian Marangi <ansuelsmth@gmail.com>
+Date: Sun, 30 Jul 2023 09:41:11 +0200
+Subject: [PATCH 2/4] net: dsa: qca8k: limit user ports access to the first CPU
+ port on setup
+
+In preparation for multi-CPU support, set CPU port LOOKUP MEMBER outside
+the port loop and setup the LOOKUP MEMBER mask for user ports only to
+the first CPU port.
+
+This is to handle flooding condition where every CPU port is set as
+target and prevent packet duplication for unknown frames from user ports.
+
+Secondary CPU port LOOKUP MEMBER mask will be setup later when
+port_change_master will be implemented.
+
+Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
+Reviewed-by: Simon Horman <simon.horman@corigine.com>
+Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
+Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
+Link: https://lore.kernel.org/r/20230730074113.21889-3-ansuelsmth@gmail.com
+Signed-off-by: Paolo Abeni <pabeni@redhat.com>
+---
+ drivers/net/dsa/qca/qca8k-8xxx.c | 14 ++++++--------
+ 1 file changed, 6 insertions(+), 8 deletions(-)
+
+--- a/drivers/net/dsa/qca/qca8k-8xxx.c
++++ b/drivers/net/dsa/qca/qca8k-8xxx.c
+@@ -1863,18 +1863,16 @@ qca8k_setup(struct dsa_switch *ds)
+ 	if (ret)
+ 		return ret;
+ 
++	/* CPU port gets connected to all user ports of the switch */
++	ret = qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(cpu_port),
++			QCA8K_PORT_LOOKUP_MEMBER, dsa_user_ports(ds));
++	if (ret)
++		return ret;
++
+ 	/* Setup connection between CPU port & user ports
+ 	 * Configure specific switch configuration for ports
+ 	 */
+ 	for (i = 0; i < QCA8K_NUM_PORTS; i++) {
+-		/* CPU port gets connected to all user ports of the switch */
+-		if (dsa_is_cpu_port(ds, i)) {
+-			ret = qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(i),
+-					QCA8K_PORT_LOOKUP_MEMBER, dsa_user_ports(ds));
+-			if (ret)
+-				return ret;
+-		}
+-
+ 		/* Individual user ports get connected to CPU port only */
+ 		if (dsa_is_user_port(ds, i)) {
+ 			ret = qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(i),

target/linux/generic/backport-6.1/780-v6.6-03-net-dsa-qca8k-move-qca8xxx-hol-fixup-to-separate-fun.patch

@@ -0,0 +1,111 @@
+From a9108b0712bf018dc69020864b21485b71b17dfc Mon Sep 17 00:00:00 2001
+From: Christian Marangi <ansuelsmth@gmail.com>
+Date: Sun, 30 Jul 2023 09:41:12 +0200
+Subject: [PATCH 3/4] net: dsa: qca8k: move qca8xxx hol fixup to separate
+ function
+
+Move qca8xxx hol fixup to separate function to tidy things up and to
+permit using a more efficent loop in future patch.
+
+Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
+Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
+Link: https://lore.kernel.org/r/20230730074113.21889-4-ansuelsmth@gmail.com
+Signed-off-by: Paolo Abeni <pabeni@redhat.com>
+---
+ drivers/net/dsa/qca/qca8k-8xxx.c | 78 +++++++++++++++++---------------
+ 1 file changed, 42 insertions(+), 36 deletions(-)
+
+--- a/drivers/net/dsa/qca/qca8k-8xxx.c
++++ b/drivers/net/dsa/qca/qca8k-8xxx.c
+@@ -1773,6 +1773,46 @@ static int qca8k_connect_tag_protocol(st
+ 	return 0;
+ }
+ 
++static void qca8k_setup_hol_fixup(struct qca8k_priv *priv, int port)
++{
++	u32 mask;
++
++	switch (port) {
++	/* The 2 CPU port and port 5 requires some different
++	 * priority than any other ports.
++	 */
++	case 0:
++	case 5:
++	case 6:
++		mask = QCA8K_PORT_HOL_CTRL0_EG_PRI0(0x3) |
++			QCA8K_PORT_HOL_CTRL0_EG_PRI1(0x4) |
++			QCA8K_PORT_HOL_CTRL0_EG_PRI2(0x4) |
++			QCA8K_PORT_HOL_CTRL0_EG_PRI3(0x4) |
++			QCA8K_PORT_HOL_CTRL0_EG_PRI4(0x6) |
++			QCA8K_PORT_HOL_CTRL0_EG_PRI5(0x8) |
++			QCA8K_PORT_HOL_CTRL0_EG_PORT(0x1e);
++		break;
++	default:
++		mask = QCA8K_PORT_HOL_CTRL0_EG_PRI0(0x3) |
++			QCA8K_PORT_HOL_CTRL0_EG_PRI1(0x4) |
++			QCA8K_PORT_HOL_CTRL0_EG_PRI2(0x6) |
++			QCA8K_PORT_HOL_CTRL0_EG_PRI3(0x8) |
++			QCA8K_PORT_HOL_CTRL0_EG_PORT(0x19);
++	}
++	regmap_write(priv->regmap, QCA8K_REG_PORT_HOL_CTRL0(port), mask);
++
++	mask = QCA8K_PORT_HOL_CTRL1_ING(0x6) |
++	       QCA8K_PORT_HOL_CTRL1_EG_PRI_BUF_EN |
++	       QCA8K_PORT_HOL_CTRL1_EG_PORT_BUF_EN |
++	       QCA8K_PORT_HOL_CTRL1_WRED_EN;
++	regmap_update_bits(priv->regmap, QCA8K_REG_PORT_HOL_CTRL1(port),
++			   QCA8K_PORT_HOL_CTRL1_ING_BUF_MASK |
++			   QCA8K_PORT_HOL_CTRL1_EG_PRI_BUF_EN |
++			   QCA8K_PORT_HOL_CTRL1_EG_PORT_BUF_EN |
++			   QCA8K_PORT_HOL_CTRL1_WRED_EN,
++			   mask);
++}
++
+ static int
+ qca8k_setup(struct dsa_switch *ds)
+ {
+@@ -1908,42 +1948,8 @@ qca8k_setup(struct dsa_switch *ds)
+ 		 * missing settings to improve switch stability under load condition.
+ 		 * This problem is limited to qca8337 and other qca8k switch are not affected.
+ 		 */
+-		if (priv->switch_id == QCA8K_ID_QCA8337) {
+-			switch (i) {
+-			/* The 2 CPU port and port 5 requires some different
+-			 * priority than any other ports.
+-			 */
+-			case 0:
+-			case 5:
+-			case 6:
+-				mask = QCA8K_PORT_HOL_CTRL0_EG_PRI0(0x3) |
+-					QCA8K_PORT_HOL_CTRL0_EG_PRI1(0x4) |
+-					QCA8K_PORT_HOL_CTRL0_EG_PRI2(0x4) |
+-					QCA8K_PORT_HOL_CTRL0_EG_PRI3(0x4) |
+-					QCA8K_PORT_HOL_CTRL0_EG_PRI4(0x6) |
+-					QCA8K_PORT_HOL_CTRL0_EG_PRI5(0x8) |
+-					QCA8K_PORT_HOL_CTRL0_EG_PORT(0x1e);
+-				break;
+-			default:
+-				mask = QCA8K_PORT_HOL_CTRL0_EG_PRI0(0x3) |
+-					QCA8K_PORT_HOL_CTRL0_EG_PRI1(0x4) |
+-					QCA8K_PORT_HOL_CTRL0_EG_PRI2(0x6) |
+-					QCA8K_PORT_HOL_CTRL0_EG_PRI3(0x8) |
+-					QCA8K_PORT_HOL_CTRL0_EG_PORT(0x19);
+-			}
+-			qca8k_write(priv, QCA8K_REG_PORT_HOL_CTRL0(i), mask);
+-
+-			mask = QCA8K_PORT_HOL_CTRL1_ING(0x6) |
+-			QCA8K_PORT_HOL_CTRL1_EG_PRI_BUF_EN |
+-			QCA8K_PORT_HOL_CTRL1_EG_PORT_BUF_EN |
+-			QCA8K_PORT_HOL_CTRL1_WRED_EN;
+-			qca8k_rmw(priv, QCA8K_REG_PORT_HOL_CTRL1(i),
+-				  QCA8K_PORT_HOL_CTRL1_ING_BUF_MASK |
+-				  QCA8K_PORT_HOL_CTRL1_EG_PRI_BUF_EN |
+-				  QCA8K_PORT_HOL_CTRL1_EG_PORT_BUF_EN |
+-				  QCA8K_PORT_HOL_CTRL1_WRED_EN,
+-				  mask);
+-		}
++		if (priv->switch_id == QCA8K_ID_QCA8337)
++			qca8k_setup_hol_fixup(priv, i);
+ 	}
+ 
+ 	/* Special GLOBAL_FC_THRESH value are needed for ar8327 switch */

target/linux/generic/backport-6.1/780-v6.6-04-net-dsa-qca8k-use-dsa_for_each-macro-instead-of-for-.patch

@@ -0,0 +1,158 @@
+From 01e6f8ad8d26ced14b0cf288c42e55d03a7c5070 Mon Sep 17 00:00:00 2001
+From: Christian Marangi <ansuelsmth@gmail.com>
+Date: Sun, 30 Jul 2023 09:41:13 +0200
+Subject: [PATCH 4/4] net: dsa: qca8k: use dsa_for_each macro instead of for
+ loop
+
+Convert for loop to dsa_for_each macro to save some redundant write on
+unconnected/unused port and tidy things up.
+
+Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
+Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
+Link: https://lore.kernel.org/r/20230730074113.21889-5-ansuelsmth@gmail.com
+Signed-off-by: Paolo Abeni <pabeni@redhat.com>
+---
+ drivers/net/dsa/qca/qca8k-8xxx.c | 107 ++++++++++++++++---------------
+ 1 file changed, 54 insertions(+), 53 deletions(-)
+
+--- a/drivers/net/dsa/qca/qca8k-8xxx.c
++++ b/drivers/net/dsa/qca/qca8k-8xxx.c
+@@ -1817,7 +1817,8 @@ static int
+ qca8k_setup(struct dsa_switch *ds)
+ {
+ 	struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv;
+-	int cpu_port, ret, i;
++	struct dsa_port *dp;
++	int cpu_port, ret;
+ 	u32 mask;
+ 
+ 	cpu_port = qca8k_find_cpu_port(ds);
+@@ -1868,27 +1869,27 @@ qca8k_setup(struct dsa_switch *ds)
+ 		dev_warn(priv->dev, "mib init failed");
+ 
+ 	/* Initial setup of all ports */
+-	for (i = 0; i < QCA8K_NUM_PORTS; i++) {
++	dsa_switch_for_each_port(dp, ds) {
+ 		/* Disable forwarding by default on all ports */
+-		ret = qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(i),
++		ret = qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(dp->index),
+ 				QCA8K_PORT_LOOKUP_MEMBER, 0);
+ 		if (ret)
+ 			return ret;
++	}
+ 
+-		/* Enable QCA header mode on all cpu ports */
+-		if (dsa_is_cpu_port(ds, i)) {
+-			ret = qca8k_write(priv, QCA8K_REG_PORT_HDR_CTRL(i),
+-					  FIELD_PREP(QCA8K_PORT_HDR_CTRL_TX_MASK, QCA8K_PORT_HDR_CTRL_ALL) |
+-					  FIELD_PREP(QCA8K_PORT_HDR_CTRL_RX_MASK, QCA8K_PORT_HDR_CTRL_ALL));
+-			if (ret) {
+-				dev_err(priv->dev, "failed enabling QCA header mode");
+-				return ret;
+-			}
++	/* Disable MAC by default on all user ports */
++	dsa_switch_for_each_user_port(dp, ds)
++		qca8k_port_set_status(priv, dp->index, 0);
++
++	/* Enable QCA header mode on all cpu ports */
++	dsa_switch_for_each_cpu_port(dp, ds) {
++		ret = qca8k_write(priv, QCA8K_REG_PORT_HDR_CTRL(dp->index),
++				  FIELD_PREP(QCA8K_PORT_HDR_CTRL_TX_MASK, QCA8K_PORT_HDR_CTRL_ALL) |
++				  FIELD_PREP(QCA8K_PORT_HDR_CTRL_RX_MASK, QCA8K_PORT_HDR_CTRL_ALL));
++		if (ret) {
++			dev_err(priv->dev, "failed enabling QCA header mode on port %d", dp->index);
++			return ret;
+ 		}
+-
+-		/* Disable MAC by default on all user ports */
+-		if (dsa_is_user_port(ds, i))
+-			qca8k_port_set_status(priv, i, 0);
+ 	}
+ 
+ 	/* Forward all unknown frames to CPU port for Linux processing
+@@ -1910,48 +1911,48 @@ qca8k_setup(struct dsa_switch *ds)
+ 		return ret;
+ 
+ 	/* Setup connection between CPU port & user ports
+-	 * Configure specific switch configuration for ports
++	 * Individual user ports get connected to CPU port only
+ 	 */
+-	for (i = 0; i < QCA8K_NUM_PORTS; i++) {
+-		/* Individual user ports get connected to CPU port only */
+-		if (dsa_is_user_port(ds, i)) {
+-			ret = qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(i),
+-					QCA8K_PORT_LOOKUP_MEMBER,
+-					BIT(cpu_port));
+-			if (ret)
+-				return ret;
+-
+-			ret = regmap_clear_bits(priv->regmap, QCA8K_PORT_LOOKUP_CTRL(i),
+-						QCA8K_PORT_LOOKUP_LEARN);
+-			if (ret)
+-				return ret;
+-
+-			/* For port based vlans to work we need to set the
+-			 * default egress vid
+-			 */
+-			ret = qca8k_rmw(priv, QCA8K_EGRESS_VLAN(i),
+-					QCA8K_EGREES_VLAN_PORT_MASK(i),
+-					QCA8K_EGREES_VLAN_PORT(i, QCA8K_PORT_VID_DEF));
+-			if (ret)
+-				return ret;
+-
+-			ret = qca8k_write(priv, QCA8K_REG_PORT_VLAN_CTRL0(i),
+-					  QCA8K_PORT_VLAN_CVID(QCA8K_PORT_VID_DEF) |
+-					  QCA8K_PORT_VLAN_SVID(QCA8K_PORT_VID_DEF));
+-			if (ret)
+-				return ret;
+-		}
++	dsa_switch_for_each_user_port(dp, ds) {
++		u8 port = dp->index;
+ 
+-		/* The port 5 of the qca8337 have some problem in flood condition. The
+-		 * original legacy driver had some specific buffer and priority settings
+-		 * for the different port suggested by the QCA switch team. Add this
+-		 * missing settings to improve switch stability under load condition.
+-		 * This problem is limited to qca8337 and other qca8k switch are not affected.
++		ret = qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(port),
++				QCA8K_PORT_LOOKUP_MEMBER,
++				BIT(cpu_port));
++		if (ret)
++			return ret;
++
++		ret = regmap_clear_bits(priv->regmap, QCA8K_PORT_LOOKUP_CTRL(port),
++					QCA8K_PORT_LOOKUP_LEARN);
++		if (ret)
++			return ret;
++
++		/* For port based vlans to work we need to set the
++		 * default egress vid
+ 		 */
+-		if (priv->switch_id == QCA8K_ID_QCA8337)
+-			qca8k_setup_hol_fixup(priv, i);
++		ret = qca8k_rmw(priv, QCA8K_EGRESS_VLAN(port),
++				QCA8K_EGREES_VLAN_PORT_MASK(port),
++				QCA8K_EGREES_VLAN_PORT(port, QCA8K_PORT_VID_DEF));
++		if (ret)
++			return ret;
++
++		ret = qca8k_write(priv, QCA8K_REG_PORT_VLAN_CTRL0(port),
++				  QCA8K_PORT_VLAN_CVID(QCA8K_PORT_VID_DEF) |
++				  QCA8K_PORT_VLAN_SVID(QCA8K_PORT_VID_DEF));
++		if (ret)
++			return ret;
+ 	}
+ 
++	/* The port 5 of the qca8337 have some problem in flood condition. The
++	 * original legacy driver had some specific buffer and priority settings
++	 * for the different port suggested by the QCA switch team. Add this
++	 * missing settings to improve switch stability under load condition.
++	 * This problem is limited to qca8337 and other qca8k switch are not affected.
++	 */
++	if (priv->switch_id == QCA8K_ID_QCA8337)
++		dsa_switch_for_each_available_port(dp, ds)
++			qca8k_setup_hol_fixup(priv, dp->index);
++
+ 	/* Special GLOBAL_FC_THRESH value are needed for ar8327 switch */
+ 	if (priv->switch_id == QCA8K_ID_QCA8327) {
+ 		mask = QCA8K_GLOBAL_FC_GOL_XON_THRES(288) |

target/linux/generic/backport-6.1/801-v6.4-01-net-dsa-qca8k-move-qca8k_port_to_phy-to-header.patch

@@ -20,7 +20,7 @@ Signed-off-by: David S. Miller <davem@davemloft.net>
 
 --- a/drivers/net/dsa/qca/qca8k-8xxx.c
 +++ b/drivers/net/dsa/qca/qca8k-8xxx.c
-@@ -719,21 +719,6 @@ err_clear_skb:
+@@ -778,21 +778,6 @@ err_clear_skb:
  	return ret;
  }
  
@@ -44,7 +44,7 @@ Signed-off-by: David S. Miller <davem@davemloft.net>
  {
 --- a/drivers/net/dsa/qca/qca8k.h
 +++ b/drivers/net/dsa/qca/qca8k.h
-@@ -422,6 +422,20 @@ struct qca8k_fdb {
+@@ -421,6 +421,20 @@ struct qca8k_fdb {
  	u8 mac[6];
  };
  

target/linux/generic/backport-6.1/801-v6.4-02-net-dsa-qca8k-add-LEDs-basic-support.patch

@@ -71,7 +71,7 @@ Signed-off-by: David S. Miller <davem@davemloft.net>
  
  static void
  qca8k_split_addr(u32 regaddr, u16 *r1, u16 *r2, u16 *page)
-@@ -1729,6 +1730,10 @@ qca8k_setup(struct dsa_switch *ds)
+@@ -1829,6 +1830,10 @@ qca8k_setup(struct dsa_switch *ds)
  	if (ret)
  		return ret;
  
@@ -386,7 +386,7 @@ Signed-off-by: David S. Miller <davem@davemloft.net>
  #define QCA8K_GOL_MAC_ADDR0				0x60
  #define QCA8K_GOL_MAC_ADDR1				0x64
  #define QCA8K_MAX_FRAME_SIZE				0x78
-@@ -383,6 +429,19 @@ struct qca8k_pcs {
+@@ -382,6 +428,19 @@ struct qca8k_pcs {
  	int port;
  };
  
@@ -406,7 +406,7 @@ Signed-off-by: David S. Miller <davem@davemloft.net>
  struct qca8k_priv {
  	u8 switch_id;
  	u8 switch_revision;
-@@ -407,6 +466,7 @@ struct qca8k_priv {
+@@ -406,6 +465,7 @@ struct qca8k_priv {
  	struct qca8k_pcs pcs_port_0;
  	struct qca8k_pcs pcs_port_6;
  	const struct qca8k_match_data *info;

target/linux/generic/hack-5.15/790-SFP-GE-T-ignore-TX_FAULT.patch

@@ -26,7 +26,7 @@ Signed-off-by: Daniel Golle <daniel@makrotopia.org>
 
 --- a/drivers/net/phy/sfp.c
 +++ b/drivers/net/phy/sfp.c
-@@ -383,6 +383,11 @@ static const struct sfp_quirk sfp_quirks
+@@ -390,6 +390,11 @@ static const struct sfp_quirk sfp_quirks
  		.modes = sfp_quirk_2500basex,
  		.fixup = sfp_fixup_ignore_tx_fault,
  	}, {
@@ -38,7 +38,7 @@ Signed-off-by: Daniel Golle <daniel@makrotopia.org>
  		// Lantech 8330-262D-E can operate at 2500base-X, but
  		// incorrectly report 2500MBd NRZ in their EEPROM
  		.vendor = "Lantech",
-@@ -2312,7 +2317,8 @@ static void sfp_sm_main(struct sfp *sfp,
+@@ -2319,7 +2324,8 @@ static void sfp_sm_main(struct sfp *sfp,
  			 * or t_start_up, so assume there is a fault.
  			 */
  			sfp_sm_fault(sfp, SFP_S_INIT_TX_FAULT,
@@ -48,7 +48,7 @@ Signed-off-by: Daniel Golle <daniel@makrotopia.org>
  		} else if (event == SFP_E_TIMEOUT || event == SFP_E_TX_CLEAR) {
  	init_done:
  			sfp->sm_phy_retries = R_PHY_RETRY;
-@@ -2535,10 +2541,12 @@ static void sfp_check_state(struct sfp *
+@@ -2542,10 +2548,12 @@ static void sfp_check_state(struct sfp *
  	mutex_lock(&sfp->st_mutex);
  	state = sfp_get_state(sfp);
  	changed = state ^ sfp->state;

target/linux/generic/hack-6.1/790-SFP-GE-T-ignore-TX_FAULT.patch

@@ -26,7 +26,7 @@ Signed-off-by: Daniel Golle <daniel@makrotopia.org>
 
 --- a/drivers/net/phy/sfp.c
 +++ b/drivers/net/phy/sfp.c
-@@ -404,6 +404,9 @@ static const struct sfp_quirk sfp_quirks
+@@ -409,6 +409,9 @@ static const struct sfp_quirk sfp_quirks
  	SFP_QUIRK("HUAWEI", "MA5671A", sfp_quirk_2500basex,
  		  sfp_fixup_ignore_tx_fault),
  
@@ -36,7 +36,7 @@ Signed-off-by: Daniel Golle <daniel@makrotopia.org>
  	// Lantech 8330-262D-E can operate at 2500base-X, but incorrectly report
  	// 2500MBd NRZ in their EEPROM
  	SFP_QUIRK_M("Lantech", "8330-262D-E", sfp_quirk_2500basex),
-@@ -2339,7 +2342,8 @@ static void sfp_sm_main(struct sfp *sfp,
+@@ -2344,7 +2347,8 @@ static void sfp_sm_main(struct sfp *sfp,
  			 * or t_start_up, so assume there is a fault.
  			 */
  			sfp_sm_fault(sfp, SFP_S_INIT_TX_FAULT,
@@ -46,7 +46,7 @@ Signed-off-by: Daniel Golle <daniel@makrotopia.org>
  		} else if (event == SFP_E_TIMEOUT || event == SFP_E_TX_CLEAR) {
  	init_done:
  			/* Create mdiobus and start trying for PHY */
-@@ -2568,10 +2572,12 @@ static void sfp_check_state(struct sfp *
+@@ -2573,10 +2577,12 @@ static void sfp_check_state(struct sfp *
  	mutex_lock(&sfp->st_mutex);
  	state = sfp_get_state(sfp);
  	changed = state ^ sfp->state;

target/linux/generic/pending-6.1/711-01-net-dsa-qca8k-implement-lag_fdb_add-del-ops.patch

@@ -0,0 +1,86 @@
+From 3b4329230db8750bea7a56ef07f07cbbf5fc6c5a Mon Sep 17 00:00:00 2001
+From: Christian Marangi <ansuelsmth@gmail.com>
+Date: Tue, 4 Jul 2023 22:50:12 +0200
+Subject: [PATCH 19/20] net: dsa: qca8k: implement lag_fdb_add/del ops
+
+Implement lag_fdb_add/del ops to correctly support using LAG interface.
+Qca8k switch supports declaring fdb entry for link aggregation by simply
+setting the DES_PORT bits to all the LAG member.
+
+Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
+---
+ drivers/net/dsa/qca/qca8k-8xxx.c   |  2 ++
+ drivers/net/dsa/qca/qca8k-common.c | 48 ++++++++++++++++++++++++++++++
+ drivers/net/dsa/qca/qca8k.h        |  6 ++++
+ 3 files changed, 56 insertions(+)
+
+--- a/drivers/net/dsa/qca/qca8k-8xxx.c
++++ b/drivers/net/dsa/qca/qca8k-8xxx.c
+@@ -1993,6 +1993,8 @@ static const struct dsa_switch_ops qca8k
+ 	.port_fdb_add		= qca8k_port_fdb_add,
+ 	.port_fdb_del		= qca8k_port_fdb_del,
+ 	.port_fdb_dump		= qca8k_port_fdb_dump,
++	.lag_fdb_add		= qca8k_lag_fdb_add,
++	.lag_fdb_del		= qca8k_lag_fdb_del,
+ 	.port_mdb_add		= qca8k_port_mdb_add,
+ 	.port_mdb_del		= qca8k_port_mdb_del,
+ 	.port_mirror_add	= qca8k_port_mirror_add,
+--- a/drivers/net/dsa/qca/qca8k-common.c
++++ b/drivers/net/dsa/qca/qca8k-common.c
+@@ -1215,6 +1215,42 @@ int qca8k_port_lag_leave(struct dsa_swit
+ 	return qca8k_lag_refresh_portmap(ds, port, lag, true);
+ }
+ 
++int qca8k_lag_fdb_add(struct dsa_switch *ds, struct dsa_lag lag,
++		      const unsigned char *addr, u16 vid,
++		      struct dsa_db db)
++{
++	struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv;
++	struct dsa_port *dp;
++	u16 port_mask = 0;
++
++	/* Set the vid to the port vlan id if no vid is set */
++	if (!vid)
++		vid = QCA8K_PORT_VID_DEF;
++
++	dsa_lag_foreach_port(dp, ds->dst, &lag)
++		port_mask |= BIT(dp->index);
++
++	return qca8k_port_fdb_insert(priv, addr, port_mask, vid);
++}
++
++int qca8k_lag_fdb_del(struct dsa_switch *ds, struct dsa_lag lag,
++		      const unsigned char *addr, u16 vid,
++		      struct dsa_db db)
++{
++	struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv;
++	struct dsa_port *dp;
++	u16 port_mask = 0;
++
++	/* Set the vid to the port vlan id if no vid is set */
++	if (!vid)
++		vid = QCA8K_PORT_VID_DEF;
++
++	dsa_lag_foreach_port(dp, ds->dst, &lag)
++	port_mask |= BIT(dp->index);
++
++	return qca8k_fdb_del(priv, addr, port_mask, vid);
++}
++
+ int qca8k_read_switch_id(struct qca8k_priv *priv)
+ {
+ 	u32 val;
+--- a/drivers/net/dsa/qca/qca8k.h
++++ b/drivers/net/dsa/qca/qca8k.h
+@@ -590,5 +590,11 @@ int qca8k_port_lag_join(struct dsa_switc
+ 			struct netlink_ext_ack *extack);
+ int qca8k_port_lag_leave(struct dsa_switch *ds, int port,
+ 			 struct dsa_lag lag);
++int qca8k_lag_fdb_add(struct dsa_switch *ds, struct dsa_lag lag,
++		      const unsigned char *addr, u16 vid,
++		      struct dsa_db db);
++int qca8k_lag_fdb_del(struct dsa_switch *ds, struct dsa_lag lag,
++		      const unsigned char *addr, u16 vid,
++		      struct dsa_db db);
+ 
+ #endif /* __QCA8K_H */

target/linux/generic/pending-6.1/711-02-net-dsa-qca8k-enable-flooding-to-both-CPU-port.patch

@@ -0,0 +1,37 @@
+From b954d61d9ecfa64450fc178586719dc2a95b92a7 Mon Sep 17 00:00:00 2001
+From: Christian Marangi <ansuelsmth@gmail.com>
+Date: Tue, 20 Jun 2023 21:48:24 +0200
+Subject: [PATCH 3/4] net: dsa: qca8k: enable flooding to both CPU port
+
+To permit a multi-CPU setup, flood all unknown frames to all CPU ports.
+Each CPU port should have correct LOOKUP MEMBER configuration to
+prevent receiving duplicate packets from user ports.
+
+Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
+---
+ drivers/net/dsa/qca/qca8k-8xxx.c | 13 +++++--------
+ 1 file changed, 5 insertions(+), 8 deletions(-)
+
+--- a/drivers/net/dsa/qca/qca8k-8xxx.c
++++ b/drivers/net/dsa/qca/qca8k-8xxx.c
+@@ -1882,15 +1882,12 @@ qca8k_setup(struct dsa_switch *ds)
+ 		}
+ 	}
+ 
+-	/* Forward all unknown frames to CPU port for Linux processing
+-	 * Notice that in multi-cpu config only one port should be set
+-	 * for igmp, unknown, multicast and broadcast packet
+-	 */
++	/* Forward all unknown frames to CPU port for Linux processing */
+ 	ret = qca8k_write(priv, QCA8K_REG_GLOBAL_FW_CTRL1,
+-			  FIELD_PREP(QCA8K_GLOBAL_FW_CTRL1_IGMP_DP_MASK, BIT(cpu_port)) |
+-			  FIELD_PREP(QCA8K_GLOBAL_FW_CTRL1_BC_DP_MASK, BIT(cpu_port)) |
+-			  FIELD_PREP(QCA8K_GLOBAL_FW_CTRL1_MC_DP_MASK, BIT(cpu_port)) |
+-			  FIELD_PREP(QCA8K_GLOBAL_FW_CTRL1_UC_DP_MASK, BIT(cpu_port)));
++			  FIELD_PREP(QCA8K_GLOBAL_FW_CTRL1_IGMP_DP_MASK, dsa_cpu_ports(ds)) |
++			  FIELD_PREP(QCA8K_GLOBAL_FW_CTRL1_BC_DP_MASK, dsa_cpu_ports(ds)) |
++			  FIELD_PREP(QCA8K_GLOBAL_FW_CTRL1_MC_DP_MASK, dsa_cpu_ports(ds)) |
++			  FIELD_PREP(QCA8K_GLOBAL_FW_CTRL1_UC_DP_MASK, dsa_cpu_ports(ds)));
+ 	if (ret)
+ 		return ret;
+ 

target/linux/generic/pending-6.1/711-03-net-dsa-qca8k-add-support-for-port_change_master.patch

@@ -0,0 +1,158 @@
+From b2d6ebf2f92f8695c83fa6979f4ab579c588df76 Mon Sep 17 00:00:00 2001
+From: Christian Marangi <ansuelsmth@gmail.com>
+Date: Tue, 20 Jun 2023 07:57:38 +0200
+Subject: [PATCH 4/4] net: dsa: qca8k: add support for port_change_master
+
+Add support for port_change_master to permit assigning an alternative
+CPU port if the switch have both CPU port connected or create a LAG on
+both CPU port and assign the LAG as DSA master.
+
+On port change master request, we check if the master is a LAG.
+With LAG we compose the cpu_port_mask with the CPU port in the LAG, if
+master is a simple dsa_port, we derive the index.
+
+Finally we apply the new cpu_port_mask to the LOOKUP MEMBER to permit
+the port to receive packet by the new CPU port setup for the port and we
+refresh the CPU ports LOOKUP MEMBER configuration to reflect the new
+user port state.
+
+port_lag_join/leave is updated to refresh the user ports if we detect
+that the LAG is a DSA master and we have user port using it as a master.
+
+Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
+---
+ drivers/net/dsa/qca/qca8k-8xxx.c | 116 ++++++++++++++++++++++++++++++-
+ 1 file changed, 114 insertions(+), 2 deletions(-)
+
+--- a/drivers/net/dsa/qca/qca8k-8xxx.c
++++ b/drivers/net/dsa/qca/qca8k-8xxx.c
+@@ -1719,6 +1719,117 @@ qca8k_get_tag_protocol(struct dsa_switch
+ 	return DSA_TAG_PROTO_QCA;
+ }
+ 
++static int qca8k_port_change_master(struct dsa_switch *ds, int port,
++				    struct net_device *master,
++				    struct netlink_ext_ack *extack)
++{
++	struct dsa_switch_tree *dst = ds->dst;
++	struct qca8k_priv *priv = ds->priv;
++	u8 cpu_port_mask = 0;
++	struct dsa_port *dp;
++	u32 val;
++	int ret;
++
++	/* With LAG of CPU port, compose the mask for port LOOKUP MEMBER */
++	if (netif_is_lag_master(master)) {
++		struct dsa_lag *lag;
++		int id;
++
++		id = dsa_lag_id(dst, master);
++		lag = dsa_lag_by_id(dst, id);
++
++		dsa_lag_foreach_port(dp, dst, lag)
++			if (dsa_port_is_cpu(dp))
++				cpu_port_mask |= BIT(dp->index);
++	} else {
++		dp = master->dsa_ptr;
++		cpu_port_mask |= BIT(dp->index);
++	}
++
++	/* Connect port to new cpu port */
++	ret = regmap_read(priv->regmap, QCA8K_PORT_LOOKUP_CTRL(port), &val);
++	if (ret)
++		return ret;
++
++	/* Reset connected CPU port in port LOOKUP MEMBER */
++	val &=  ~dsa_cpu_ports(ds);
++	/* Assign the new CPU port in port LOOKUP MEMBER */
++	val |= cpu_port_mask;
++
++	ret = regmap_update_bits(priv->regmap, QCA8K_PORT_LOOKUP_CTRL(port),
++				 QCA8K_PORT_LOOKUP_MEMBER,
++				 val);
++	if (ret)
++		return ret;
++
++	/* Refresh CPU port LOOKUP MEMBER with new port */
++	dsa_tree_for_each_cpu_port(dp, ds->dst) {
++		u32 reg = QCA8K_PORT_LOOKUP_CTRL(dp->index);
++
++		/* If CPU port in mask assign port, else remove port */
++		if (BIT(dp->index) & cpu_port_mask)
++			ret = regmap_set_bits(priv->regmap, reg, BIT(port));
++		else
++			ret = regmap_clear_bits(priv->regmap, reg, BIT(port));
++
++		if (ret)
++			return ret;
++	}
++
++	return 0;
++}
++
++static int qca8k_port_lag_refresh_user_ports(struct dsa_switch *ds,
++					     struct dsa_lag lag)
++{
++	struct net_device *lag_dev = lag.dev;
++	struct dsa_port *dp;
++	int ret;
++
++	/* Ignore if LAG is not a DSA master */
++	if (!netif_is_lag_master(lag_dev))
++		return 0;
++
++	dsa_switch_for_each_user_port(dp, ds) {
++		/* Skip if assigned master is not the LAG */
++		if (dsa_port_to_master(dp) != lag_dev)
++			continue;
++
++		ret = qca8k_port_change_master(ds, dp->index,
++					       lag_dev, NULL);
++		if (ret)
++			return ret;
++	}
++
++	return 0;
++}
++
++static int qca8xxx_port_lag_join(struct dsa_switch *ds, int port,
++				 struct dsa_lag lag,
++				 struct netdev_lag_upper_info *info,
++				 struct netlink_ext_ack *extack)
++{
++	int ret;
++
++	ret = qca8k_port_lag_join(ds, port, lag, info, extack);
++	if (ret)
++		return ret;
++
++	return qca8k_port_lag_refresh_user_ports(ds, lag);
++}
++
++static int qca8xxx_port_lag_leave(struct dsa_switch *ds, int port,
++				  struct dsa_lag lag)
++{
++	int ret;
++
++	ret = qca8k_port_lag_leave(ds, port, lag);
++	if (ret)
++		return ret;
++
++	return qca8k_port_lag_refresh_user_ports(ds, lag);
++}
++
+ static void
+ qca8k_master_change(struct dsa_switch *ds, const struct net_device *master,
+ 		    bool operational)
+@@ -2005,8 +2116,9 @@ static const struct dsa_switch_ops qca8k
+ 	.phylink_mac_link_down	= qca8k_phylink_mac_link_down,
+ 	.phylink_mac_link_up	= qca8k_phylink_mac_link_up,
+ 	.get_phy_flags		= qca8k_get_phy_flags,
+-	.port_lag_join		= qca8k_port_lag_join,
+-	.port_lag_leave		= qca8k_port_lag_leave,
++	.port_lag_join		= qca8xxx_port_lag_join,
++	.port_lag_leave		= qca8xxx_port_lag_leave,
++	.port_change_master	= qca8k_port_change_master,
+ 	.master_state_change	= qca8k_master_change,
+ 	.connect_tag_protocol	= qca8k_connect_tag_protocol,
+ };

target/linux/ipq40xx/patches-6.1/706-net-dsa-qca8k-add-IPQ4019-built-in-switch-support.patch

@@ -58,7 +58,7 @@ Signed-off-by: Robert Marko <robert.marko@sartura.hr>
 +obj-$(CONFIG_NET_DSA_QCA8K_IPQ4019)	+= qca8k-ipq4019.o qca8k-common.o
 --- a/drivers/net/dsa/qca/qca8k-common.c
 +++ b/drivers/net/dsa/qca/qca8k-common.c
-@@ -449,7 +449,7 @@ static int qca8k_vlan_del(struct qca8k_p
+@@ -412,7 +412,7 @@ static int qca8k_vlan_del(struct qca8k_p
  
  	/* Check if we're the last member to be removed */
  	del = true;
@@ -67,7 +67,7 @@ Signed-off-by: Robert Marko <robert.marko@sartura.hr>
  		mask = QCA8K_VTU_FUNC0_EG_MODE_PORT_NOT(i);
  
  		if ((reg & mask) != mask) {
-@@ -642,7 +642,7 @@ int qca8k_port_bridge_join(struct dsa_sw
+@@ -653,7 +653,7 @@ int qca8k_port_bridge_join(struct dsa_sw
  	cpu_port = dsa_to_port(ds, port)->cpu_dp->index;
  	port_mask = BIT(cpu_port);
  
@@ -76,7 +76,7 @@ Signed-off-by: Robert Marko <robert.marko@sartura.hr>
  		if (dsa_is_cpu_port(ds, i))
  			continue;
  		if (!dsa_port_offloads_bridge(dsa_to_port(ds, i), &bridge))
-@@ -674,7 +674,7 @@ void qca8k_port_bridge_leave(struct dsa_
+@@ -685,7 +685,7 @@ void qca8k_port_bridge_leave(struct dsa_
  
  	cpu_port = dsa_to_port(ds, port)->cpu_dp->index;
  
@@ -1057,7 +1057,7 @@ Signed-off-by: Robert Marko <robert.marko@sartura.hr>
  
  #define QCA8K_QCA832X_MIB_COUNT				39
  #define QCA8K_QCA833X_MIB_COUNT				41
-@@ -263,6 +267,7 @@
+@@ -265,6 +269,7 @@
  #define   QCA8K_PORT_LOOKUP_STATE_LEARNING		QCA8K_PORT_LOOKUP_STATE(0x3)
  #define   QCA8K_PORT_LOOKUP_STATE_FORWARD		QCA8K_PORT_LOOKUP_STATE(0x4)
  #define   QCA8K_PORT_LOOKUP_LEARN			BIT(20)
@@ -1065,7 +1065,7 @@ Signed-off-by: Robert Marko <robert.marko@sartura.hr>
  #define   QCA8K_PORT_LOOKUP_ING_MIRROR_EN		BIT(25)
  
  #define QCA8K_REG_GOL_TRUNK_CTRL0			0x700
-@@ -339,6 +344,53 @@
+@@ -341,6 +346,53 @@
  #define MII_ATH_MMD_ADDR				0x0d
  #define MII_ATH_MMD_DATA				0x0e
  
@@ -1119,7 +1119,7 @@ Signed-off-by: Robert Marko <robert.marko@sartura.hr>
  enum {
  	QCA8K_PORT_SPEED_10M = 0,
  	QCA8K_PORT_SPEED_100M = 1,
-@@ -467,6 +519,10 @@ struct qca8k_priv {
+@@ -466,6 +518,10 @@ struct qca8k_priv {
  	struct qca8k_pcs pcs_port_6;
  	const struct qca8k_match_data *info;
  	struct qca8k_led ports_led[QCA8K_LED_COUNT];

target/linux/ipq806x/Makefile

@@ -16,11 +16,11 @@ KERNELNAME:=zImage Image dtbs
 
 include $(INCLUDE_DIR)/target.mk
 DEFAULT_PACKAGES += \
-	kmod-leds-gpio kmod-gpio-button-hotplug swconfig \
+	kmod-leds-gpio kmod-gpio-button-hotplug \
 	kmod-ata-ahci kmod-ata-ahci-platform \
 	kmod-usb-ohci kmod-usb2 kmod-usb-ledtrig-usbport \
 	kmod-phy-qcom-ipq806x-usb kmod-usb3 kmod-usb-dwc3-qcom \
 	kmod-ath10k-ct wpad-openssl uboot-envtools \
-	automount
+	ip-tiny automount
 
 $(eval $(call BuildTarget))

target/linux/ipq806x/base-files/etc/board.d/01_leds

@@ -9,9 +9,21 @@ board_config_update
 board=$(board_name)
 
 case "$board" in
+askey,rt4230w-rev6)
+	ucidef_set_led_netdev "wan-port-link" "WAN-PORT-LINK" "qca8k-0.0:00:green:wan" "wan" "link-10 link-100 link-1000"
+	ucidef_set_led_netdev "wan-port-activity" "WAN-PORT-ACTIVITY" "qca8k-0.0:00:amber:wan" "wan" "tx rx"
+	ucidef_set_led_netdev "lan1-port-link" "LAN1-PORT-LINK" "qca8k-0.0:01:green:lan" "lan1" "link-10 link-100 link-1000"
+	ucidef_set_led_netdev "lan1-port-activity" "LAN1-PORT-ACTIVITY" "qca8k-0.0:01:amber:lan" "lan1" "tx rx"
+	ucidef_set_led_netdev "lan2-port-link" "LAN2-PORT-LINK" "qca8k-0.0:02:green:lan" "lan2" "link-10 link-100 link-1000"
+	ucidef_set_led_netdev "lan2-port-activity" "LAN2-PORT-ACTIVITY" "qca8k-0.0:02:amber:lan" "lan2" "tx rx"
+	ucidef_set_led_netdev "lan3-port-link" "LAN3-PORT-LINK" "qca8k-0.0:03:green:lan" "lan3" "link-10 link-100 link-1000"
+	ucidef_set_led_netdev "lan3-port-activity" "LAN3-PORT-ACTIVITY" "qca8k-0.0:03:amber:lan" "lan3" "tx rx"
+	ucidef_set_led_netdev "lan4-port-link" "LAN4-PORT-LINK" "qca8k-0.0:04:green:lan" "lan4" "link-10 link-100 link-1000"
+	ucidef_set_led_netdev "lan4-port-activity" "LAN4-PORT-ACTIVITY" "qca8k-0.0:04:amber:lan" "lan4" "tx rx"
+	;;
 buffalo,wxr-2533dhp)
 	ucidef_set_led_wlan "wlan" "WLAN" "white:wireless" "phy0tpt"
-	ucidef_set_led_switch "wan" "WAN" "white:internet" "switch0" "0x20"
+	ucidef_set_led_netdev "wan" "WAN" "white:internet" "wan"
 	;;
 compex,wpq864)
 	ucidef_set_led_usbport "usb" "USB" "green:usb" "usb1-port1" "usb2-port1"
@@ -28,10 +40,25 @@ meraki,mr52)
 nec,wg2600hp)
 	ucidef_set_led_wlan "wlan2g" "WLAN2G" "green:wlan2g" "phy1tpt"
 	ucidef_set_led_wlan "wlan5g" "WLAN5G" "green:wlan5g" "phy0tpt"
-	ucidef_set_led_switch "wan" "WAN" "green:active" "switch0" "0x2"
+	ucidef_set_led_netdev "wan" "WAN" "green:active" "wan"
 	;;
 nec,wg2600hp3)
-	ucidef_set_led_switch "wan" "WAN" "green:active" "switch0" "0x2"
+	ucidef_set_led_netdev "wan" "WAN" "green:active" "wan"
+	ucidef_set_led_netdev "wan-port-10" "WAN-PORT-10" "qca8k-0.0:00:green:wan-1" "wan" "tx rx link-10"
+	ucidef_set_led_netdev "wan-port-100" "WAN-PORT-100" "qca8k-0.0:00:green:wan-2" "wan" "tx rx link-100"
+	ucidef_set_led_netdev "wan-port-1000" "WAN-PORT-1000" "qca8k-0.0:00:green:wan-3" "wan" "tx rx link-1000"
+	ucidef_set_led_netdev "lan1-port-10" "LAN1-PORT-10" "qca8k-0.0:01:green:lan-1" "lan1" "tx rx link-10"
+	ucidef_set_led_netdev "lan1-port-100" "LAN1-PORT-100" "qca8k-0.0:01:green:lan-2" "lan1" "tx rx link-100"
+	ucidef_set_led_netdev "lan1-port-1000" "LAN1-PORT-1000" "qca8k-0.0:01:green:lan-3" "lan1" "tx rx link-1000"
+	ucidef_set_led_netdev "lan2-port-10" "LAN2-PORT-10" "qca8k-0.0:02:green:lan-1" "lan2" "tx rx link-10"
+	ucidef_set_led_netdev "lan2-port-100" "LAN2-PORT-100" "qca8k-0.0:02:green:lan-2" "lan2" "tx rx link-100"
+	ucidef_set_led_netdev "lan2-port-1000" "LAN2-PORT-1000" "qca8k-0.0:02:green:lan-3" "lan2" "tx rx link-1000"
+	ucidef_set_led_netdev "lan3-port-10" "LAN3-PORT-10" "qca8k-0.0:03:green:lan-1" "lan3" "tx rx link-10"
+	ucidef_set_led_netdev "lan3-port-100" "LAN3-PORT-100" "qca8k-0.0:03:green:lan-2" "lan3" "tx rx link-100"
+	ucidef_set_led_netdev "lan3-port-1000" "LAN3-PORT-1000" "qca8k-0.0:03:green:lan-3" "lan3" "tx rx link-1000"
+	ucidef_set_led_netdev "lan4-port-10" "LAN4-PORT-10" "qca8k-0.0:04:green:lan-1" "lan4" "tx rx link-10"
+	ucidef_set_led_netdev "lan4-port-100" "LAN4-PORT-100" "qca8k-0.0:04:green:lan-2" "lan4" "tx rx link-100"
+	ucidef_set_led_netdev "lan4-port-1000" "LAN4-PORT-1000" "qca8k-0.0:04:green:lan-3" "lan4" "tx rx link-1000"
 	;;
 netgear,d7800 |\
 netgear,r7500 |\
@@ -41,7 +68,7 @@ netgear,xr450 |\
 netgear,xr500)
 	ucidef_set_led_usbport "usb1" "USB 1" "white:usb1" "usb1-port1" "usb2-port1"
 	ucidef_set_led_usbport "usb2" "USB 2" "white:usb2" "usb3-port1" "usb4-port1"
-	ucidef_set_led_switch "wan" "WAN" "white:wan" "switch0" "0x20"
+	ucidef_set_led_netdev "wan" "WAN" "white:wan" "wan"
 	ucidef_set_led_ide "esata" "eSATA" "white:esata"
 	;;
 nokia,ac400i)
@@ -55,8 +82,8 @@ nokia,ac400i)
 tplink,ad7200)
 	ucidef_set_led_usbport "usb1" "USB 1" "blue:usb1" "usb1-port1" "usb2-port1"
 	ucidef_set_led_usbport "usb2" "USB 2" "blue:usb3" "usb3-port1" "usb4-port1"
-	ucidef_set_led_switch "wan" "wan" "blue:wan" "switch0" "0x02"
+	ucidef_set_led_netdev "wan" "wan" "blue:wan" "wan"
-	ucidef_set_led_switch "lan" "lan" "blue:lan" "switch0" "0x3c"
+	ucidef_set_led_netdev "lan" "lan" "blue:lan" "br-lan"
 	ucidef_set_led_wlan "wlan2g" "wlan2g" "blue:wlan2g" "phy2tpt"
 	ucidef_set_led_wlan "wlan5g" "wlan5g" "blue:wlan5g" "phy1tpt"
 	ucidef_set_led_netdev "wlan60g" "wlan60g" "blue:wlan60g" "wlan0"
@@ -64,18 +91,18 @@ tplink,ad7200)
 tplink,c2600)
 	ucidef_set_led_usbport "usb1" "USB 1" "white:usb_2" "usb1-port1" "usb2-port1"
 	ucidef_set_led_usbport "usb2" "USB 2" "white:usb_4" "usb3-port1" "usb4-port1"
-	ucidef_set_led_switch "wan" "wan" "white:wan" "switch0" "0x20"
+	ucidef_set_led_netdev "wan" "wan" "white:wan" "wan"
-	ucidef_set_led_switch "lan" "lan" "white:lan" "switch0" "0x1e"
+	ucidef_set_led_netdev "lan" "lan" "white:lan" "br-lan"
 	;;
 tplink,vr2600v)
 	ucidef_set_led_usbport "usb" "USB" "white:usb" "usb1-port1" "usb2-port1" "usb3-port1" "usb4-port1"
-	ucidef_set_led_switch "lan" "lan" "white:lan" "switch0" "0x1e"
+	ucidef_set_led_netdev "lan" "lan" "white:lan" "br-lan"
 	ucidef_set_led_wlan "wlan2g" "WLAN2G" "white:wlan2g" "phy0tpt"
 	ucidef_set_led_wlan "wlan5g" "WLAN5G" "white:wlan5g" "phy1tpt"
-	ucidef_set_led_switch "wan" "wan" "white:wan" "switch0" "0x20"
+	ucidef_set_led_netdev "wan" "WAN" "white:wan" "wan"
 	;;
 zyxel,nbg6817)
-	ucidef_set_led_netdev "wan" "WAN" "white:internet" "eth1"
+	ucidef_set_led_netdev "wan" "WAN" "white:internet" "wan"
 	;;
 esac
 

target/linux/ipq806x/base-files/etc/board.d/02_network

@@ -12,35 +12,48 @@ ipq806x_setup_interfaces()
 
 	case "$board" in
 	arris,tr4400-v2)
-		ucidef_set_interfaces_lan_wan "eth1" "eth2"
+		ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "eth2"
-		ucidef_add_switch "switch0" \
-			"1:lan" "2:lan" "3:lan" "4:lan" "6u@eth1" "0u@eth0"
 		;;
 	askey,rt4230w-rev6 |\
 	asrock,g10 |\
-	nec,wg2600hp)
+	nec,wg2600hp |\
-		ucidef_add_switch "switch0" \
-			"2:lan" "3:lan" "4:lan" "5:lan" "6@eth1" "1:wan" "0@eth0"
-		;;
 	buffalo,wxr-2533dhp |\
 	compex,wpq864 |\
 	netgear,d7800 |\
 	netgear,r7500 |\
 	netgear,r7500v2 |\
-	qcom,ipq8064-ap148)
+	qcom,ipq8064-ap148 |\
-		ucidef_add_switch "switch0" \
+	linksys,ea7500-v1 |\
-			"1:lan" "2:lan" "3:lan" "4:lan" "6@eth1" "5:wan" "0@eth0"
+	linksys,ea8500 |\
+	nec,wg2600hp3 |\
+	netgear,r7800 |\
+	netgear,xr500 |\
+	netgear,xr450 |\
+	tplink,c2600 |\
+	tplink,vr2600v |\
+	tplink,ad7200 |\
+	zyxel,nbg6817)
+		ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "wan"
+		;;
+	asus,onhub |\
+	ruijie,rg-mtfi-m520 |\
+	tplink,onhub)
+		ucidef_set_interfaces_lan_wan "lan1" "wan"
 		;;
 	edgecore,ecw5410)
 		ucidef_set_interfaces_lan_wan "eth1" "eth0"
 		;;
-	linksys,ea7500-v1)
+	qcom,ipq8064-ap161)
-		ucidef_add_switch "switch0" \
+		ucidef_set_interface_lan "eth1 eth2 lan1 lan2 lan3 lan4" "wan"
-			"2:lan:1" "3:lan:2" "4:lan:3" "5:lan:4" "6@eth1" "1:wan" "0@eth0"
 		;;
-	linksys,ea8500)
+	qcom,ipq8064-db149)
-		ucidef_add_switch "switch0" \
+		ucidef_set_interface_lan "eth1 eth2 eth3 lan1 lan2 lan3 lan4" "wan"
-			"1:lan" "2:lan" "3:lan" "4:lan" "6@eth1" "5:wan" "0@eth0"
+		;;
+	ubnt,unifi-ac-hd)
+		ucidef_set_interface_lan "eth0 eth1"
+		;;
+	xiaomi,mi-router-hd)
+		ucidef_set_interfaces_lan_wan "lan1 lan2 lan3" "wan"
 		;;
 	meraki,mr42)
 		ucidef_set_interface_lan "eth0"
@@ -48,57 +61,13 @@ ipq806x_setup_interfaces()
 	meraki,mr52)
 		ucidef_set_interfaces_lan_wan "eth0" "eth1"
 		;;
-	nec,wg2600hp3)
-		ucidef_add_switch "switch0" \
-			"2:lan" "3:lan" "4:lan" "5:lan" "0@eth1" "1:wan" "6@eth0"
-		;;
-	netgear,r7800 |\
-	netgear,xr450 |\
-	netgear,xr500 |\
-	tplink,c2600 |\
-	tplink,vr2600v)
-		ucidef_add_switch "switch0" \
-			"1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "6@eth1" "5:wan" "0@eth0"
-		;;
-	qcom,ipq8064-ap161)
-		ucidef_set_interface_lan "eth1 eth2"
-		ucidef_add_switch "switch0" \
-			"0:lan" "1:lan" "2:lan" "3u@eth1" "6:wan" "4u@eth0"
-		;;
-	qcom,ipq8064-db149)
-		ucidef_set_interface_lan "eth1 eth2 eth3"
-		ucidef_add_switch "switch0" \
-			"1:lan" "2:lan" "3:lan" "4:lan" "6u@eth1" "5:wan" "0u@eth0"
-		;;
-	tplink,ad7200)
-		ucidef_add_switch "switch0" \
-			"2:lan:1" "3:lan:2" "4:lan:3" "5:lan:4" "6@eth1" "1:wan" "0@eth0"
-		;;
-	asus,onhub |\
-	tplink,onhub)
-		ucidef_set_interfaces_lan_wan "eth1" "eth0"
-		ucidef_add_switch "switch0" \
-			"1:lan" "6@eth1" "2:wan" "0@eth0"
-		;;
-	nokia,ac400i |\
-	ubnt,unifi-ac-hd)
-		ucidef_set_interface_lan "eth0 eth1"
-		;;
-	xiaomi,mi-router-hd)
-		ucidef_add_switch "switch0" \
-			"1:lan:3" "2:lan:2" "3:lan:1" "6@eth1" "5:wan" "0@eth0"
-		;;
-	zyxel,nbg6817)
-		ucidef_add_switch "switch0" \
-			"1:lan" "2:lan" "3:lan" "4:lan" "6@eth1" "5:wan" "0@eth0"
-		;;
 	*)
 		echo "Unsupported hardware. Network interfaces not intialized"
 		;;
 	esac
 }
 
-ipq806x_setup_mac_address()
+ipq806x_setup_macs()
 {
 	local board="$1"
 
@@ -115,8 +84,6 @@ ipq806x_setup_mac_address()
 		;;
 		ruijie,rg-mtfi-m520)
 			hw_mac_addr=$(mtd_get_mac_ascii PRODUCTINFO ethaddr)
-		ucidef_add_switch "switch0" \
-			"1:lan" "6@eth1" "5:wan" "0@eth0"
 			ucidef_set_interface_macaddr "wan" "$hw_mac_addr"
 			ucidef_set_interface_macaddr "lan" "$(macaddr_add $hw_mac_addr 1)"
 		;;
@@ -125,14 +92,19 @@ ipq806x_setup_mac_address()
 			ucidef_set_interface_macaddr "lan" "$(macaddr_add $hw_mac_addr 2)"
 			ucidef_set_interface_macaddr "wan" "$(macaddr_add $hw_mac_addr 3)"
 		;;
+		asrock,g10)
+			hw_mac_addr=$(mtd_get_mac_ascii hwconfig HW.LAN.MAC.Address)
+			ucidef_set_interface_macaddr "lan" "$hw_mac_addr"
+			hw_mac_addr=$(mtd_get_mac_ascii hwconfig HW.WAN.MAC.Address)
+			ucidef_set_interface_macaddr "wan" "$hw_mac_addr"
+		;;
 	esac
 }
 
 board_config_update
-
 board=$(board_name)
 
-ipq806x_setup_mac_address $board
+ipq806x_setup_macs $board
 ipq806x_setup_interfaces $board
 
 board_config_flush

target/linux/ipq806x/base-files/etc/board.d/05_compat-version

@@ -0,0 +1,47 @@
+#!/bin/sh
+#
+# Copyright (C) 2020 OpenWrt.org
+#
+
+. /lib/functions.sh
+. /lib/functions/uci-defaults.sh
+
+board_config_update
+
+case "$(board_name)" in
+	arris,tr4400-v2 |\
+	askey,rt4230w-rev6 |\
+	asrock,g10 |\
+	buffalo,wxr-2533dhp |\
+	compex,wpq864 |\
+	nec,wg2600hp |\
+	nec,wg2600hp3 |\
+	netgear,d7800 |\
+	netgear,r7500 |\
+	netgear,r7500v2 |\
+	netgear,r7800 |\
+	netgear,xr450 |\
+	netgear,xr500 |\
+	nokia,ac400i |\
+	qcom,ipq8064-ap148 |\
+	qcom,ipq8064-ap161 |\
+	qcom,ipq8064-db149 |\
+	ruijie,rg-mtfi-m520 |\
+	tplink,ad7200 |\
+	tplink,c2600 |\
+	tplink,vr2600v |\
+	xiaomi,mi-router-hd |\
+	zyxel,nbg6817 |\
+	asus,onhub |\
+	tplink,onhub)
+		ucidef_set_compat_version "1.1"
+		;;
+	linksys,ea7500-v1 |\
+	linksys,ea8500)
+		ucidef_set_compat_version "2.1"
+		;;
+esac
+
+board_config_flush
+
+exit 0

target/linux/ipq806x/base-files/etc/init.d/qca8k_set_port

@@ -0,0 +1,52 @@
+#!/bin/sh /etc/rc.common
+
+START=15
+
+set_qca8k_port() {
+	local port=$1
+	local master=$2
+
+	ip link set $port type dsa conduit $master
+}
+
+boot() {
+	# Restore original implementation where the eth1 (port 6) was used
+	# for the lan port and the eth0 (port 0) was used for the wan port
+	case $(board_name) in
+		askey,rt4230w-rev6 |\
+		asrock,g10 |\
+		buffalo,wxr-2533dhp |\
+		compex,wpq864 |\
+		nec,wg2600hp |\
+		nec,wg2600hp3 |\
+		netgear,d7800 |\
+		netgear,r7500 |\
+		netgear,r7500v2 |\
+		netgear,r7800 |\
+		netgear,xr450 |\
+		netgear,xr500 |\
+		nokia,ac400i |\
+		tplink,ad7200 |\
+		tplink,c2600 |\
+		tplink,vr2600v |\
+		zyxel,nbg6817)
+			set_qca8k_port lan1 eth1
+			set_qca8k_port lan2 eth1
+			set_qca8k_port lan3 eth1
+			set_qca8k_port lan4 eth1
+			set_qca8k_port wan eth0
+			;;
+		asus,onhub |\
+		ruijie,rg-mtfi-m520 |\
+		tplink,onhub)
+			set_qca8k_port lan1 eth1
+			set_qca8k_port wan eth0
+			;;
+		xiaomi,mi-router-hd)
+			set_qca8k_port lan1 eth1
+			set_qca8k_port lan2 eth1
+			set_qca8k_port lan3 eth1
+			set_qca8k_port wan eth0
+			;;
+	esac
+}

target/linux/ipq806x/base-files/lib/preinit/05_set_iface_mac_ipq806x.sh

@@ -1,19 +0,0 @@
-. /lib/functions.sh
-
-preinit_set_mac_address() {
-	case $(board_name) in
-	asrock,g10)
-		lan_mac=$(mtd_get_mac_ascii hwconfig HW.LAN.MAC.Address)
-		wan_mac=$(mtd_get_mac_ascii hwconfig HW.WAN.MAC.Address)
-		ip link set dev eth0 address "${lan_mac}"
-		ip link set dev eth1 address "${wan_mac}"
-		;;
-	ruijie,rg-mtfi-m520)
-		base_mac=$(mtd_get_mac_ascii PRODUCTINFO ethaddr)
-		ip link set dev eth0 address $(macaddr_add "$base_mac" 1)
-		ip link set dev eth1 address $(macaddr_add "$base_mac" 2)
-		;;
-	esac
-}
-
-boot_hook_add preinit_main preinit_set_mac_address

target/linux/ipq806x/config-6.1

@@ -1,7 +1,6 @@
 CONFIG_ALIGNMENT_TRAP=y
 # CONFIG_APQ_GCC_8084 is not set
 # CONFIG_APQ_MMCC_8084 is not set
-CONFIG_AR8216_PHY=y
 CONFIG_ARCH_32BIT_OFF_T=y
 CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 # CONFIG_ARCH_IPQ40XX is not set

target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8062-wg2600hp3.dts

@@ -2,6 +2,7 @@
 
 #include "qcom-ipq8062-smb208.dtsi"
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
 
 / {
 	model = "NEC Platforms Aterm WG2600HP3";
@@ -413,21 +414,198 @@
 	pinctrl-0 = <&mdio0_pins>;
 	pinctrl-names = "default";
 
-	phy0: ethernet-phy@0 {
+	switch@10 {
+		compatible = "qca,qca8337";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x10>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
 				reg = <0>;
-		qca,ar8327-initvals = <
+				label = "cpu";
-			0x04 0x80080080  /* PAD0_MODE */
+				ethernet = <&gmac1>;
-			0x0c 0x06000000  /* PAD6_MODE */
+				phy-mode = "rgmii";
-			0x10 0x002613a0  /* PWS_REG */
+				tx-internal-delay-ps = <1000>;
-			0x50 0xcc36cc36  /* LED_CTRL0 */
+
-			0x54 0xca36ca36  /* LED_CTRL1 */
+				fixed-link {
-			0x58 0xc936c936  /* LED_CTRL2 */
+					speed = <1000>;
-			0x5c 0x03ffff00  /* LED_CTRL3 */
+					full-duplex;
-			0x7c 0x0000004e  /* PORT0_STATUS */
+				};
-			0x94 0x0000004e  /* PORT6_STATUS */
+			};
-			0xe0 0xc74164de  /* SGMII_CTRL */
+
-			0xe4 0x0006a545  /* MAC_PWR_SEL */
+			port@1 {
-			>;
+				reg = <1>;
+				label = "wan";
+				phy-mode = "internal";
+				phy-handle = <&phy_port1>;
+
+				leds {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					led@0 {
+						reg = <0>;
+						color = <LED_COLOR_ID_GREEN>;
+						function = LED_FUNCTION_WAN;
+						default-state = "keep";
+					};
+
+					led@1 {
+						reg = <1>;
+						color = <LED_COLOR_ID_AMBER>;
+						function = LED_FUNCTION_WAN;
+						default-state = "keep";
+					};
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+				label = "lan1";
+				phy-mode = "internal";
+				phy-handle = <&phy_port2>;
+
+				leds {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					led@0 {
+						reg = <0>;
+						color = <LED_COLOR_ID_GREEN>;
+						function = LED_FUNCTION_LAN;
+						default-state = "keep";
+					};
+
+					led@1 {
+						reg = <1>;
+						color = <LED_COLOR_ID_AMBER>;
+						function = LED_FUNCTION_LAN;
+						default-state = "keep";
+					};
+				};
+			};
+
+			port@3 {
+				reg = <3>;
+				label = "lan2";
+				phy-mode = "internal";
+				phy-handle = <&phy_port3>;
+
+				leds {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					led@0 {
+						reg = <0>;
+						color = <LED_COLOR_ID_GREEN>;
+						function = LED_FUNCTION_LAN;
+						default-state = "keep";
+					};
+
+					led@1 {
+						reg = <1>;
+						color = <LED_COLOR_ID_AMBER>;
+						function = LED_FUNCTION_LAN;
+						default-state = "keep";
+					};
+				};
+			};
+
+			port@4 {
+				reg = <4>;
+				label = "lan3";
+				phy-mode = "internal";
+				phy-handle = <&phy_port4>;
+
+				leds {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					led@0 {
+						reg = <0>;
+						color = <LED_COLOR_ID_GREEN>;
+						function = LED_FUNCTION_LAN;
+						default-state = "keep";
+					};
+
+					led@1 {
+						reg = <1>;
+						color = <LED_COLOR_ID_AMBER>;
+						function = LED_FUNCTION_LAN;
+						default-state = "keep";
+					};
+				};
+			};
+
+			port@5 {
+				reg = <5>;
+				label = "lan4";
+				phy-mode = "internal";
+				phy-handle = <&phy_port5>;
+
+				leds {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					led@0 {
+						reg = <0>;
+						color = <LED_COLOR_ID_GREEN>;
+						function = LED_FUNCTION_LAN;
+						default-state = "keep";
+					};
+
+					led@1 {
+						reg = <1>;
+						color = <LED_COLOR_ID_AMBER>;
+						function = LED_FUNCTION_LAN;
+						default-state = "keep";
+					};
+				};
+			};
+
+			port@6 {
+				reg = <6>;
+				label = "cpu";
+				ethernet = <&gmac2>;
+				phy-mode = "sgmii";
+				qca,sgmii-enable-pll;
+				qca,sgmii-rxclk-falling-edge;
+
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+		};
+
+		mdio {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			phy_port1: phy@0 {
+				reg = <0>;
+			};
+
+			phy_port2: phy@1 {
+				reg = <1>;
+			};
+
+			phy_port3: phy@2 {
+				reg = <2>;
+			};
+
+			phy_port4: phy@3 {
+				reg = <3>;
+			};
+
+			phy_port5: phy@4 {
+				reg = <4>;
+			};
+		};
 	};
 };
 

target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-ad7200-c2600.dtsi

@@ -337,21 +337,103 @@
 	pinctrl-0 = <&mdio0_pins>;
 	pinctrl-names = "default";
 
-	phy0: ethernet-phy@0 {
+	switch@10 {
+		compatible = "qca,qca8337";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x10>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
 				reg = <0>;
-		qca,ar8327-initvals = <
+				label = "cpu";
-			0x00004 0x7600000   /* PAD0_MODE */
+				ethernet = <&gmac1>;
-			0x00008 0x1000000   /* PAD5_MODE */
+				phy-mode = "rgmii";
-			0x0000c 0x80        /* PAD6_MODE */
+				tx-internal-delay-ps = <1000>;
-			0x000e4 0x6a545     /* MAC_POWER_SEL */
+				rx-internal-delay-ps = <1000>;
-			0x000e0 0xc74164de  /* SGMII_CTRL */
+
-			0x0007c 0x4e        /* PORT0_STATUS */
+				fixed-link {
-			0x00094 0x4e        /* PORT6_STATUS */
+					speed = <1000>;
-			>;
+					full-duplex;
+				};
 			};
 
-	phy4: ethernet-phy@4 {
+			port@1 {
+				reg = <1>;
+				label = "lan4";
+				phy-mode = "internal";
+				phy-handle = <&phy_port1>;
+			};
+
+			port@2 {
+				reg = <2>;
+				label = "lan3";
+				phy-mode = "internal";
+				phy-handle = <&phy_port2>;
+			};
+
+			port@3 {
+				reg = <3>;
+				label = "lan2";
+				phy-mode = "internal";
+				phy-handle = <&phy_port3>;
+			};
+
+			port@4 {
 				reg = <4>;
+				label = "lan1";
+				phy-mode = "internal";
+				phy-handle = <&phy_port4>;
+			};
+
+			port@5 {
+				reg = <5>;
+				label = "wan";
+				phy-mode = "internal";
+				phy-handle = <&phy_port5>;
+			};
+
+			port@6 {
+				reg = <6>;
+				label = "cpu";
+				ethernet = <&gmac2>;
+				phy-mode = "sgmii";
+				qca,sgmii-enable-pll;
+
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+		};
+
+		mdio {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			phy_port1: phy@0 {
+				reg = <0>;
+			};
+
+			phy_port2: phy@1 {
+				reg = <1>;
+			};
+
+			phy_port3: phy@2 {
+				reg = <2>;
+			};
+
+			phy_port4: phy@3 {
+				reg = <3>;
+			};
+
+			phy_port5: phy@4 {
+				reg = <4>;
+			};
+		};
 	};
 };
 

target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-ad7200.dts

@@ -129,6 +129,32 @@
 	};
 };
 
+&mdio0 {
+	switch@10 {
+		ports {
+			port@1 {
+				label = "wan";
+			};
+
+			port@2 {
+				label = "lan1";
+			};
+
+			port@3 {
+				label = "lan2";
+			};
+
+			port@4 {
+				label = "lan3";
+			};
+
+			port@5 {
+				label = "lan4";
+			};
+		};
+	};
+};
+
 &pcie2 {
 	status = "okay";
 	max-link-speed = <1>;

target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-ap148.dts

@@ -90,21 +90,106 @@
 	pinctrl-0 = <&mdio0_pins>;
 	pinctrl-names = "default";
 
-	phy0: ethernet-phy@0 {
+	switch@10 {
+		compatible = "qca,qca8337";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x10>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
 				reg = <0>;
-		qca,ar8327-initvals = <
+				label = "cpu";
-			0x00004 0x7600000   /* PAD0_MODE */
+				ethernet = <&gmac1>;
-			0x00008 0x1000000   /* PAD5_MODE */
+				phy-mode = "rgmii";
-			0x0000c 0x80        /* PAD6_MODE */
+				tx-internal-delay-ps = <1000>;
-			0x000e4 0x6a545     /* MAC_POWER_SEL */
+				rx-internal-delay-ps = <1000>;
-			0x000e0 0xc74164de  /* SGMII_CTRL */
+
-			0x0007c 0x4e        /* PORT0_STATUS */
+				fixed-link {
-			0x00094 0x4e        /* PORT6_STATUS */
+					speed = <1000>;
-			>;
+					full-duplex;
+				};
 			};
 
-	phy4: ethernet-phy@4 {
+			port@1 {
+				reg = <1>;
+				label = "lan1";
+				phy-mode = "internal";
+				phy-handle = <&phy_port1>;
+			};
+
+			port@2 {
+				reg = <2>;
+				label = "lan2";
+				phy-mode = "internal";
+				phy-handle = <&phy_port2>;
+			};
+
+			port@3 {
+				reg = <3>;
+				label = "lan3";
+				phy-mode = "internal";
+				phy-handle = <&phy_port3>;
+			};
+
+			port@4 {
 				reg = <4>;
+				label = "lan4";
+				phy-mode = "internal";
+				phy-handle = <&phy_port4>;
+			};
+
+			port@5 {
+				reg = <5>;
+				label = "wan";
+				phy-mode = "internal";
+				phy-handle = <&phy_port5>;
+			};
+
+			/*
+			port@6 {
+				reg = <0>;
+				label = "cpu";
+				ethernet = <&gmac2>;
+				phy-mode = "rgmii";
+
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+					pause;
+					asym-pause;
+				};
+			};
+			*/
+		};
+
+		mdio {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			phy_port1: phy@0 {
+				reg = <0>;
+			};
+
+			phy_port2: phy@1 {
+				reg = <1>;
+			};
+
+			phy_port3: phy@2 {
+				reg = <2>;
+			};
+
+			phy_port4: phy@3 {
+				reg = <3>;
+			};
+
+			phy_port5: phy@4 {
+				reg = <4>;
+			};
+		};
 	};
 };
 

target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-ap161.dts

@@ -102,24 +102,106 @@
 	pinctrl-0 = <&mdio0_pins>;
 	pinctrl-names = "default";
 
-	phy0: ethernet-phy@0 {
+	switch@10 {
+		compatible = "qca,qca8337";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x10>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
 				reg = <0>;
-		qca,ar8327-initvals = <
+				label = "cpu";
-			0x00004 0x7600000   /* PAD0_MODE */
+				ethernet = <&gmac0>;
-			0x00008 0x1000000   /* PAD5_MODE */
+				phy-mode = "rgmii";
-			0x0000c 0x20080     /* PAD6_MODE */
+				tx-internal-delay-ps = <1000>;
-			0x000e4 0x6a545     /* MAC_POWER_SEL */
+				rx-internal-delay-ps = <1000>;
-			0x000e0 0xc74164de  /* SGMII_CTRL */
+
-			0x0007c 0x4e        /* PORT0_STATUS */
+				fixed-link {
-			0x00094 0x4e        /* PORT6_STATUS */
+					speed = <1000>;
-			>;
+					full-duplex;
+				};
 			};
 
-	phy4: ethernet-phy@4 {
+			port@1 {
+				reg = <1>;
+				label = "lan4";
+				phy-mode = "internal";
+				phy-handle = <&phy_port1>;
+			};
+
+			port@2 {
+				reg = <2>;
+				label = "lan3";
+				phy-mode = "internal";
+				phy-handle = <&phy_port2>;
+			};
+
+			port@3 {
+				reg = <3>;
+				label = "lan2";
+				phy-mode = "internal";
+				phy-handle = <&phy_port3>;
+			};
+
+			port@4 {
 				reg = <4>;
-		qca,phy-rgmii-en;
+				label = "lan1";
-		qca,txclk-delay-en;
+				phy-mode = "internal";
-		qca,rxclk-delay-en;
+				phy-handle = <&phy_port4>;
+			};
+
+			port@5 {
+				reg = <5>;
+				label = "wan";
+				phy-mode = "internal";
+				phy-handle = <&phy_port5>;
+			};
+
+			/*
+			port@6 {
+				reg = <0>;
+				label = "cpu";
+				ethernet = <&gmac2>;
+				phy-mode = "rgmii";
+
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+					pause;
+					asym-pause;
+				};
+			};
+			*/
+		};
+
+		mdio {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			phy_port1: phy@0 {
+				reg = <0>;
+			};
+
+			phy_port2: phy@1 {
+				reg = <1>;
+			};
+
+			phy_port3: phy@2 {
+				reg = <2>;
+			};
+
+			phy_port4: phy@3 {
+				reg = <3>;
+			};
+
+			phy_port5: phy@4 {
+				reg = <4>;
+			};
+		};
 	};
 
 	phy3: ethernet-phy@3 {

target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-d7800.dts

@@ -340,21 +340,103 @@
 	pinctrl-0 = <&mdio0_pins>;
 	pinctrl-names = "default";
 
-	phy0: ethernet-phy@0 {
+	switch@10 {
+		compatible = "qca,qca8337";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x10>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
 				reg = <0>;
-		qca,ar8327-initvals = <
+				label = "cpu";
-			0x00004 0x7600000   /* PAD0_MODE */
+				ethernet = <&gmac1>;
-			0x00008 0x1000000   /* PAD5_MODE */
+				phy-mode = "rgmii";
-			0x0000c 0x80        /* PAD6_MODE */
+				tx-internal-delay-ps = <1000>;
-			0x000e4 0x6a545     /* MAC_POWER_SEL */
+				rx-internal-delay-ps = <1000>;
-			0x000e0 0xc74164de  /* SGMII_CTRL */
+
-			0x0007c 0x4e        /* PORT0_STATUS */
+				fixed-link {
-			0x00094 0x4e        /* PORT6_STATUS */
+					speed = <1000>;
-			>;
+					full-duplex;
+				};
 			};
 
-	phy4: ethernet-phy@4 {
+			port@1 {
+				reg = <1>;
+				label = "lan1";
+				phy-mode = "internal";
+				phy-handle = <&phy_port1>;
+			};
+
+			port@2 {
+				reg = <2>;
+				label = "lan2";
+				phy-mode = "internal";
+				phy-handle = <&phy_port2>;
+			};
+
+			port@3 {
+				reg = <3>;
+				label = "lan3";
+				phy-mode = "internal";
+				phy-handle = <&phy_port3>;
+			};
+
+			port@4 {
 				reg = <4>;
+				label = "lan4";
+				phy-mode = "internal";
+				phy-handle = <&phy_port4>;
+			};
+
+			port@5 {
+				reg = <5>;
+				label = "wan";
+				phy-mode = "internal";
+				phy-handle = <&phy_port5>;
+			};
+
+			port@6 {
+				reg = <6>;
+				label = "cpu";
+				ethernet = <&gmac2>;
+				phy-mode = "sgmii";
+				qca,sgmii-enable-pll;
+
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+		};
+
+		mdio {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			phy_port1: phy@0 {
+				reg = <0>;
+			};
+
+			phy_port2: phy@1 {
+				reg = <1>;
+			};
+
+			phy_port3: phy@2 {
+				reg = <2>;
+			};
+
+			phy_port4: phy@3 {
+				reg = <3>;
+			};
+
+			phy_port5: phy@4 {
+				reg = <4>;
+			};
+		};
 	};
 };
 

target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-db149.dts

@@ -117,21 +117,106 @@
 	pinctrl-0 = <&mdio0_pins>;
 	pinctrl-names = "default";
 
-	phy0: ethernet-phy@0 {
+	switch@10 {
+		compatible = "qca,qca8337";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x10>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
 				reg = <0>;
-		qca,ar8327-initvals = <
+				label = "cpu";
-			0x00004 0x7600000   /* PAD0_MODE */
+				ethernet = <&gmac0>;
-			0x00008 0x1000000   /* PAD5_MODE */
+				phy-mode = "rgmii";
-			0x0000c 0x80        /* PAD6_MODE */
+				tx-internal-delay-ps = <1000>;
-			0x000e4 0x6a545     /* MAC_POWER_SEL */
+				rx-internal-delay-ps = <1000>;
-			0x000e0 0xc74164de  /* SGMII_CTRL */
+
-			0x0007c 0x4e        /* PORT0_STATUS */
+				fixed-link {
-			0x00094 0x4e        /* PORT6_STATUS */
+					speed = <1000>;
-		>;
+					full-duplex;
+				};
 			};
 
-	phy4: ethernet-phy@4 {
+			port@1 {
+				reg = <1>;
+				label = "lan4";
+				phy-mode = "internal";
+				phy-handle = <&phy_port1>;
+			};
+
+			port@2 {
+				reg = <2>;
+				label = "lan3";
+				phy-mode = "internal";
+				phy-handle = <&phy_port2>;
+			};
+
+			port@3 {
+				reg = <3>;
+				label = "lan2";
+				phy-mode = "internal";
+				phy-handle = <&phy_port3>;
+			};
+
+			port@4 {
 				reg = <4>;
+				label = "lan1";
+				phy-mode = "internal";
+				phy-handle = <&phy_port4>;
+			};
+
+			port@5 {
+				reg = <5>;
+				label = "wan";
+				phy-mode = "internal";
+				phy-handle = <&phy_port5>;
+			};
+
+			/*
+			port@6 {
+				reg = <0>;
+				label = "cpu";
+				ethernet = <&gmac2>;
+				phy-mode = "rgmii";
+
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+					pause;
+					asym-pause;
+				};
+			};
+			*/
+		};
+
+		mdio {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			phy_port1: phy@0 {
+				reg = <0>;
+			};
+
+			phy_port2: phy@1 {
+				reg = <1>;
+			};
+
+			phy_port3: phy@2 {
+				reg = <2>;
+			};
+
+			phy_port4: phy@3 {
+				reg = <3>;
+			};
+
+			phy_port5: phy@4 {
+				reg = <4>;
+			};
+		};
 	};
 
 	phy6: ethernet-phy@6 {
@@ -147,7 +232,6 @@
 	status = "okay";
 	phy-mode = "rgmii";
 	qcom,id = <0>;
-	phy-handle = <&phy4>;
 
 	pinctrl-0 = <&rgmii0_pins>;
 	pinctrl-names = "default";

target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-ea7500-v1.dts

@@ -89,3 +89,29 @@
 		reg = <0x6080000 0x1f80000>;
 	};
 };
+
+&mdio0 {
+	switch@10 {
+		ports {
+			port@1 {
+				label = "wan";
+			};
+
+			port@2 {
+				label = "lan1";
+			};
+
+			port@3 {
+				label = "lan2";
+			};
+
+			port@4 {
+				label = "lan3";
+			};
+
+			port@5 {
+				label = "lan4";
+			};
+		};
+	};
+};

target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-ea8500.dts

@@ -106,12 +106,6 @@
 	};
 };
 
-&mdio0 {
-	phy4: ethernet-phy@4 {
-		reg = <4>;
-	};
-};
-
 &gmac1 {
 	qcom,phy_mdio_addr = <4>;
 	qcom,poll_required = <1>;

target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-eax500.dtsi

@@ -185,18 +185,103 @@
 	reset-gpios = <&qcom_pinmux 63 GPIO_ACTIVE_HIGH>;
 	reset-post-delay-us = <12000>;
 
-	phy0: ethernet-phy@0 {
+	switch@10 {
+		compatible = "qca,qca8337";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x10>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
 				reg = <0>;
-		qca,ar8327-initvals = <
+				label = "cpu";
-			0x00004 0x7600000   /* PAD0_MODE */
+				ethernet = <&gmac1>;
-			0x00008 0x1000000   /* PAD5_MODE */
+				phy-mode = "rgmii";
-			0x0000c 0x80        /* PAD6_MODE */
+				tx-internal-delay-ps = <1000>;
-			0x00010 0x2613a0    /* PWS_REG */
+				rx-internal-delay-ps = <1000>;
-			0x000e4 0x6a545     /* MAC_POWER_SEL */
+
-			0x000e0 0xc74164de  /* SGMII_CTRL */
+				fixed-link {
-			0x0007c 0x4e        /* PORT0_STATUS */
+					speed = <1000>;
-			0x00094 0x4e        /* PORT6_STATUS */
+					full-duplex;
-			>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				label = "lan1";
+				phy-mode = "internal";
+				phy-handle = <&phy_port1>;
+			};
+
+			port@2 {
+				reg = <2>;
+				label = "lan2";
+				phy-mode = "internal";
+				phy-handle = <&phy_port2>;
+			};
+
+			port@3 {
+				reg = <3>;
+				label = "lan3";
+				phy-mode = "internal";
+				phy-handle = <&phy_port3>;
+			};
+
+			port@4 {
+				reg = <4>;
+				label = "lan4";
+				phy-mode = "internal";
+				phy-handle = <&phy_port4>;
+			};
+
+			port@5 {
+				reg = <5>;
+				label = "wan";
+				phy-mode = "internal";
+				phy-handle = <&phy_port5>;
+			};
+
+			port@6 {
+				reg = <6>;
+				label = "cpu";
+				ethernet = <&gmac2>;
+				phy-mode = "sgmii";
+				qca,sgmii-enable-pll;
+
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+		};
+
+		mdio {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			phy_port1: phy@0 {
+				reg = <0>;
+			};
+
+			phy_port2: phy@1 {
+				reg = <1>;
+			};
+
+			phy_port3: phy@2 {
+				reg = <2>;
+			};
+
+			phy_port4: phy@3 {
+				reg = <3>;
+			};
+
+			phy_port5: phy@4 {
+				reg = <4>;
+			};
+		};
 	};
 };
 

target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-g10.dts

@@ -158,17 +158,103 @@
 	pinctrl-0 = <&mdio0_pins>;
 	pinctrl-names = "default";
 
-	ethernet-phy@0 {
+	switch@10 {
+		compatible = "qca,qca8337";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x10>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
 				reg = <0>;
-		qca,ar8327-initvals = <
+				label = "cpu";
-			0x00004 0x7600000   /* PAD0_MODE */
+				ethernet = <&gmac1>;
-			0x00008 0x1000000   /* PAD5_MODE */
+				phy-mode = "rgmii";
-			0x0000c 0x80        /* PAD6_MODE */
+				tx-internal-delay-ps = <1000>;
-			0x000e4 0x6a545     /* MAC_POWER_SEL */
+				rx-internal-delay-ps = <1000>;
-			0x000e0 0xc74164de  /* SGMII_CTRL */
+
-			0x0007c 0x4e        /* PORT0_STATUS */
+				fixed-link {
-			0x00094 0x4e        /* PORT6_STATUS */
+					speed = <1000>;
-			>;
+					full-duplex;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				label = "wan";
+				phy-mode = "internal";
+				phy-handle = <&phy_port1>;
+			};
+
+			port@2 {
+				reg = <2>;
+				label = "lan1";
+				phy-mode = "internal";
+				phy-handle = <&phy_port2>;
+			};
+
+			port@3 {
+				reg = <3>;
+				label = "lan2";
+				phy-mode = "internal";
+				phy-handle = <&phy_port3>;
+			};
+
+			port@4 {
+				reg = <4>;
+				label = "lan3";
+				phy-mode = "internal";
+				phy-handle = <&phy_port4>;
+			};
+
+			port@5 {
+				reg = <5>;
+				label = "lan4";
+				phy-mode = "internal";
+				phy-handle = <&phy_port5>;
+			};
+
+			port@6 {
+				reg = <6>;
+				label = "cpu";
+				ethernet = <&gmac2>;
+				phy-mode = "sgmii";
+				qca,sgmii-enable-pll;
+
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+		};
+
+		mdio {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			phy_port1: phy@0 {
+				reg = <0>;
+			};
+
+			phy_port2: phy@1 {
+				reg = <1>;
+			};
+
+			phy_port3: phy@2 {
+				reg = <2>;
+			};
+
+			phy_port4: phy@3 {
+				reg = <3>;
+			};
+
+			phy_port5: phy@4 {
+				reg = <4>;
+			};
+		};
 	};
 };
 

target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-mi-router-hd.dts

@@ -410,22 +410,92 @@
 	pinctrl-0 = <&mdio0_pins>;
 	pinctrl-names = "default";
 
-	phy0: ethernet-phy@0 {
+	switch@10 {
+		compatible = "qca,qca8337";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x10>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
 				reg = <0>;
-		qca,ar8327-initvals = <
+				label = "cpu";
-			0x04 0x07600000  /* PAD0_MODE */
+				ethernet = <&gmac1>;
-			0x08 0x01000000  /* PAD5_MODE */
+				phy-mode = "rgmii";
-			0x0c 0x00000080  /* PAD6_MODE */
+				tx-internal-delay-ps = <1000>;
-			0x7c 0x0000004e  /* PORT0_STATUS */
+				rx-internal-delay-ps = <1000>;
-			0x94 0x0000004e  /* PORT6_STATUS */
+
-			0xe0 0xc74164de  /* SGMII_CTRL */
+				fixed-link {
-			0xe4 0x0006a545  /* MAC_POWER_SEL */
+					speed = <1000>;
-		>;
+					full-duplex;
+				};
 			};
 
-	phy4: ethernet-phy@4 {
+			port@1 {
+				reg = <1>;
+				label = "lan3";
+				phy-mode = "internal";
+				phy-handle = <&phy_port1>;
+			};
+
+			port@2 {
+				reg = <2>;
+				label = "lan2";
+				phy-mode = "internal";
+				phy-handle = <&phy_port2>;
+			};
+
+			port@3 {
+				reg = <3>;
+				label = "lan1";
+				phy-mode = "internal";
+				phy-handle = <&phy_port3>;
+			};
+
+			port@5 {
+				reg = <5>;
+				label = "wan";
+				phy-mode = "internal";
+				phy-handle = <&phy_port5>;
+			};
+
+			port@6 {
+				reg = <6>;
+				label = "cpu";
+				ethernet = <&gmac2>;
+				phy-mode = "sgmii";
+				qca,sgmii-enable-pll;
+
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+		};
+
+		mdio {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			phy_port1: phy@0 {
+				reg = <0>;
+			};
+
+			phy_port2: phy@1 {
+				reg = <1>;
+			};
+
+			phy_port3: phy@2 {
+				reg = <2>;
+			};
+
+			phy_port5: phy@4 {
 				reg = <4>;
 			};
+		};
 };
 
 &gmac1 {

target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-onhub.dtsi

@@ -62,21 +62,70 @@
 		pinctrl-0 = <&mdio_pins>;
 		pinctrl-names = "default";
 
-		phy0: ethernet-phy@0 {
+		switch@10 {
+			compatible = "qca,qca8337";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x10>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
 					reg = <0>;
-			qca,ar8327-initvals = <
+					label = "cpu";
-				0x00004 0x7600000   /* PAD0_MODE */
+					ethernet = <&gmac0>;
-				0x00008 0x1000000   /* PAD5_MODE */
+					phy-mode = "rgmii";
-				0x0000c 0x80        /* PAD6_MODE */
+					tx-internal-delay-ps = <1000>;
-				0x000e4 0xaa545     /* MAC_POWER_SEL */
+					rx-internal-delay-ps = <1000>;
-				0x000e0 0xc74164de  /* SGMII_CTRL */
+
-				0x0007c 0x4e        /* PORT0_STATUS */
+					fixed-link {
-				0x00094 0x4e        /* PORT6_STATUS */
+						speed = <1000>;
-				>;
+						full-duplex;
+					};
 				};
 
-		phy1: ethernet-phy@1 {
+				port@1 {
 					reg = <1>;
+					label = "lan1";
+					phy-mode = "internal";
+					phy-handle = <&phy_port1>;
+				};
+
+				port@2 {
+					reg = <2>;
+					label = "wan";
+					phy-mode = "internal";
+					phy-handle = <&phy_port2>;
+				};
+
+				port@6 {
+					reg = <6>;
+					label = "cpu";
+					ethernet = <&gmac2>;
+					phy-mode = "sgmii";
+					qca,sgmii-enable-pll;
+
+					fixed-link {
+						speed = <1000>;
+						full-duplex;
+					};
+				};
+			};
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				phy_port1: phy@0 {
+					reg = <0>;
+				};
+
+				phy_port2: phy@1 {
+					reg = <1>;
+				};
+			};
 		};
 	};
 

target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-r7500.dts

@@ -254,21 +254,103 @@
 	pinctrl-0 = <&mdio0_pins>;
 	pinctrl-names = "default";
 
-	phy0: ethernet-phy@0 {
+	switch@10 {
+		compatible = "qca,qca8337";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x10>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
 				reg = <0>;
-		qca,ar8327-initvals = <
+				label = "cpu";
-			0x00004 0x7600000   /* PAD0_MODE */
+				ethernet = <&gmac1>;
-			0x00008 0x1000000   /* PAD5_MODE */
+				phy-mode = "rgmii";
-			0x0000c 0x80        /* PAD6_MODE */
+				tx-internal-delay-ps = <1000>;
-			0x000e4 0x6a545     /* MAC_POWER_SEL */
+				rx-internal-delay-ps = <1000>;
-			0x000e0 0xc74164de  /* SGMII_CTRL */
+
-			0x0007c 0x4e        /* PORT0_STATUS */
+				fixed-link {
-			0x00094 0x4e        /* PORT6_STATUS */
+					speed = <1000>;
-			>;
+					full-duplex;
+				};
 			};
 
-	phy4: ethernet-phy@4 {
+			port@1 {
+				reg = <1>;
+				label = "lan1";
+				phy-mode = "internal";
+				phy-handle = <&phy_port1>;
+			};
+
+			port@2 {
+				reg = <2>;
+				label = "lan2";
+				phy-mode = "internal";
+				phy-handle = <&phy_port2>;
+			};
+
+			port@3 {
+				reg = <3>;
+				label = "lan3";
+				phy-mode = "internal";
+				phy-handle = <&phy_port3>;
+			};
+
+			port@4 {
 				reg = <4>;
+				label = "lan4";
+				phy-mode = "internal";
+				phy-handle = <&phy_port4>;
+			};
+
+			port@5 {
+				reg = <5>;
+				label = "wan";
+				phy-mode = "internal";
+				phy-handle = <&phy_port5>;
+			};
+
+			port@6 {
+				reg = <6>;
+				label = "cpu";
+				ethernet = <&gmac2>;
+				phy-mode = "sgmii";
+				qca,sgmii-enable-pll;
+
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+		};
+
+		mdio {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			phy_port1: phy@0 {
+				reg = <0>;
+			};
+
+			phy_port2: phy@1 {
+				reg = <1>;
+			};
+
+			phy_port3: phy@2 {
+				reg = <2>;
+			};
+
+			phy_port4: phy@3 {
+				reg = <3>;
+			};
+
+			phy_port5: phy@4 {
+				reg = <4>;
+			};
+		};
 	};
 };
 

target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-r7500v2.dts

@@ -337,21 +337,103 @@
 	pinctrl-0 = <&mdio0_pins>;
 	pinctrl-names = "default";
 
-	phy0: ethernet-phy@0 {
+	switch@10 {
+		compatible = "qca,qca8337";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x10>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
 				reg = <0>;
-		qca,ar8327-initvals = <
+				label = "cpu";
-			0x00004 0x7600000   /* PAD0_MODE */
+				ethernet = <&gmac1>;
-			0x00008 0x1000000   /* PAD5_MODE */
+				phy-mode = "rgmii";
-			0x0000c 0x80        /* PAD6_MODE */
+				tx-internal-delay-ps = <1000>;
-			0x000e4 0xaa545     /* MAC_POWER_SEL */
+				rx-internal-delay-ps = <1000>;
-			0x000e0 0xc74164de  /* SGMII_CTRL */
+
-			0x0007c 0x4e        /* PORT0_STATUS */
+				fixed-link {
-			0x00094 0x4e        /* PORT6_STATUS */
+					speed = <1000>;
-			>;
+					full-duplex;
+				};
 			};
 
-	phy4: ethernet-phy@4 {
+			port@1 {
+				reg = <1>;
+				label = "lan1";
+				phy-mode = "internal";
+				phy-handle = <&phy_port1>;
+			};
+
+			port@2 {
+				reg = <2>;
+				label = "lan2";
+				phy-mode = "internal";
+				phy-handle = <&phy_port2>;
+			};
+
+			port@3 {
+				reg = <3>;
+				label = "lan3";
+				phy-mode = "internal";
+				phy-handle = <&phy_port3>;
+			};
+
+			port@4 {
 				reg = <4>;
+				label = "lan4";
+				phy-mode = "internal";
+				phy-handle = <&phy_port4>;
+			};
+
+			port@5 {
+				reg = <5>;
+				label = "wan";
+				phy-mode = "internal";
+				phy-handle = <&phy_port5>;
+			};
+
+			port@6 {
+				reg = <6>;
+				label = "cpu";
+				ethernet = <&gmac2>;
+				phy-mode = "sgmii";
+				qca,sgmii-enable-pll;
+
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+		};
+
+		mdio {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			phy_port1: phy@0 {
+				reg = <0>;
+			};
+
+			phy_port2: phy@1 {
+				reg = <1>;
+			};
+
+			phy_port3: phy@2 {
+				reg = <2>;
+			};
+
+			phy_port4: phy@3 {
+				reg = <3>;
+			};
+
+			phy_port5: phy@4 {
+				reg = <4>;
+			};
+		};
 	};
 };
 

target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-rg-mtfi-m520.dts

@@ -266,22 +266,70 @@
 	pinctrl-0 = <&mdio0_pins>;
 	pinctrl-names = "default";
 
-	phy0: ethernet-phy@0 {
+	switch@10 {
+		compatible = "qca,qca8337";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x10>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
 				reg = <0>;
-		qca,ar8327-initvals = <
+				label = "cpu";
-			0x00004 0x7600000   /* PAD0_MODE */
+				ethernet = <&gmac1>;
-			0x00008 0x1000000   /* PAD5_MODE */
+				phy-mode = "rgmii";
-			0x0000c 0x80        /* PAD6_MODE */
+				tx-internal-delay-ps = <1000>;
-			0x000e4 0x6a545     /* MAC_POWER_SEL */
+				rx-internal-delay-ps = <1000>;
-			0x000e0 0xc74164de  /* SGMII_CTRL */
+
-			0x0007c 0x4e        /* PORT0_STATUS */
+				fixed-link {
-			0x00094 0x4e        /* PORT6_STATUS */
+					speed = <1000>;
-			>;
+					full-duplex;
+				};
 			};
 
-	phy4: ethernet-phy@4 {
+			port@1 {
+				reg = <1>;
+				label = "lan1";
+				phy-mode = "internal";
+				phy-handle = <&phy_port1>;
+			};
+
+			port@5 {
+				reg = <5>;
+				label = "wan";
+				phy-mode = "internal";
+				phy-handle = <&phy_port5>;
+			};
+
+			port@6 {
+				reg = <6>;
+				label = "cpu";
+				ethernet = <&gmac2>;
+				phy-mode = "sgmii";
+				qca,sgmii-enable-pll;
+
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+		};
+
+		mdio {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			phy_port1: phy@0 {
+				reg = <0>;
+			};
+
+			phy_port5: phy@4 {
 				reg = <4>;
 			};
+		};
 };
 
 &gmac1 {

target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-vr2600v.dts

@@ -369,21 +369,103 @@
 	pinctrl-0 = <&mdio0_pins>;
 	pinctrl-names = "default";
 
-	phy0: ethernet-phy@0 {
+	switch@10 {
+		compatible = "qca,qca8337";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x10>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
 				reg = <0>;
-		qca,ar8327-initvals = <
+				label = "cpu";
-			0x00004 0x7600000   /* PAD0_MODE */
+				ethernet = <&gmac1>;
-			0x00008 0x1000000   /* PAD5_MODE */
+				phy-mode = "rgmii";
-			0x0000c 0x80        /* PAD6_MODE */
+				tx-internal-delay-ps = <1000>;
-			0x000e4 0x6a545     /* MAC_POWER_SEL */
+				rx-internal-delay-ps = <1000>;
-			0x000e0 0xc74164de  /* SGMII_CTRL */
+
-			0x0007c 0x4e        /* PORT0_STATUS */
+				fixed-link {
-			0x00094 0x4e        /* PORT6_STATUS */
+					speed = <1000>;
-			>;
+					full-duplex;
+				};
 			};
 
-	phy4: ethernet-phy@4 {
+			port@1 {
+				reg = <1>;
+				label = "lan4";
+				phy-mode = "internal";
+				phy-handle = <&phy_port1>;
+			};
+
+			port@2 {
+				reg = <2>;
+				label = "lan3";
+				phy-mode = "internal";
+				phy-handle = <&phy_port2>;
+			};
+
+			port@3 {
+				reg = <3>;
+				label = "lan2";
+				phy-mode = "internal";
+				phy-handle = <&phy_port3>;
+			};
+
+			port@4 {
 				reg = <4>;
+				label = "lan1";
+				phy-mode = "internal";
+				phy-handle = <&phy_port4>;
+			};
+
+			port@5 {
+				reg = <5>;
+				label = "wan";
+				phy-mode = "internal";
+				phy-handle = <&phy_port5>;
+			};
+
+			port@6 {
+				reg = <6>;
+				label = "cpu";
+				ethernet = <&gmac2>;
+				phy-mode = "sgmii";
+				qca,sgmii-enable-pll;
+
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+		};
+
+		mdio {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			phy_port1: phy@0 {
+				reg = <0>;
+			};
+
+			phy_port2: phy@1 {
+				reg = <1>;
+			};
+
+			phy_port3: phy@2 {
+				reg = <2>;
+			};
+
+			phy_port4: phy@3 {
+				reg = <3>;
+			};
+
+			phy_port5: phy@4 {
+				reg = <4>;
+			};
+		};
 	};
 };
 

target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-wg2600hp.dts

@@ -141,20 +141,103 @@
 	pinctrl-0 = <&mdio0_pins>;
 	pinctrl-names = "default";
 
-	ethernet-phy@0 {
+switch@10 {
+		compatible = "qca,qca8337";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x10>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
 				reg = <0>;
-		qca,ar8327-initvals = <
+				label = "cpu";
-			0x00004 0x06000000  /* PAD0_MODE */
+				ethernet = <&gmac1>;
-			0x0000c 0x00080080  /* PAD6_MODE */
+				phy-mode = "rgmii";
-			0x000e4 0x0006a545  /* MAC_POWER_SEL */
+				tx-internal-delay-ps = <1000>;
-			0x000e0 0xc74164de  /* SGMII_CTRL */
+
-			0x0007c 0x0000004e  /* PORT0_STATUS */
+				fixed-link {
-			0x00094 0x0000004e  /* PORT6_STATUS */
+					speed = <1000>;
-			>;
+					full-duplex;
+				};
 			};
 
-	ethernet-phy@4 {
+			port@1 {
+				reg = <1>;
+				label = "wan";
+				phy-mode = "internal";
+				phy-handle = <&phy_port1>;
+			};
+
+			port@2 {
+				reg = <2>;
+				label = "lan1";
+				phy-mode = "internal";
+				phy-handle = <&phy_port2>;
+			};
+
+			port@3 {
+				reg = <3>;
+				label = "lan2";
+				phy-mode = "internal";
+				phy-handle = <&phy_port3>;
+			};
+
+			port@4 {
 				reg = <4>;
+				label = "lan3";
+				phy-mode = "internal";
+				phy-handle = <&phy_port4>;
+			};
+
+			port@5 {
+				reg = <5>;
+				label = "lan4";
+				phy-mode = "internal";
+				phy-handle = <&phy_port5>;
+			};
+
+			port@6 {
+				reg = <6>;
+				label = "cpu";
+				ethernet = <&gmac2>;
+				phy-mode = "sgmii";
+				qca,sgmii-enable-pll;
+				qca,sgmii-rxclk-falling-edge;
+
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+		};
+
+		mdio {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			phy_port1: phy@0 {
+				reg = <0>;
+			};
+
+			phy_port2: phy@1 {
+				reg = <1>;
+			};
+
+			phy_port3: phy@2 {
+				reg = <2>;
+			};
+
+			phy_port4: phy@3 {
+				reg = <3>;
+			};
+
+			phy_port5: phy@4 {
+				reg = <4>;
+			};
+		};
 	};
 };
 

target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-wpq864.dts

@@ -270,21 +270,103 @@
 	pinctrl-0 = <&mdio0_pins>;
 	pinctrl-names = "default";
 
-	ethernet-phy@0 {
+	switch@10 {
+		compatible = "qca,qca8337";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x10>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
 				reg = <0>;
-		qca,ar8327-initvals = <
+				label = "cpu";
-			0x00004 0x7600000   /* PAD0_MODE */
+				ethernet = <&gmac1>;
-			0x00008 0x1000000   /* PAD5_MODE */
+				phy-mode = "rgmii";
-			0x0000c 0x80        /* PAD6_MODE */
+				tx-internal-delay-ps = <1000>;
-			0x000e4 0x6a545     /* MAC_POWER_SEL */
+				rx-internal-delay-ps = <1000>;
-			0x000e0 0xc74164de  /* SGMII_CTRL */
+
-			0x0007c 0x4e        /* PORT0_STATUS */
+				fixed-link {
-			0x00094 0x4e        /* PORT6_STATUS */
+					speed = <1000>;
-			>;
+					full-duplex;
+				};
 			};
 
-	ethernet-phy@4 {
+			port@1 {
+				reg = <1>;
+				label = "lan1";
+				phy-mode = "internal";
+				phy-handle = <&phy_port1>;
+			};
+
+			port@2 {
+				reg = <2>;
+				label = "lan2";
+				phy-mode = "internal";
+				phy-handle = <&phy_port2>;
+			};
+
+			port@3 {
+				reg = <3>;
+				label = "lan3";
+				phy-mode = "internal";
+				phy-handle = <&phy_port3>;
+			};
+
+			port@4 {
 				reg = <4>;
+				label = "lan4";
+				phy-mode = "internal";
+				phy-handle = <&phy_port4>;
+			};
+
+			port@5 {
+				reg = <5>;
+				label = "wan";
+				phy-mode = "internal";
+				phy-handle = <&phy_port5>;
+			};
+
+			port@6 {
+				reg = <6>;
+				label = "cpu";
+				ethernet = <&gmac2>;
+				phy-mode = "sgmii";
+				qca,sgmii-enable-pll;
+
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+		};
+
+		mdio {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			phy_port1: phy@0 {
+				reg = <0>;
+			};
+
+			phy_port2: phy@1 {
+				reg = <1>;
+			};
+
+			phy_port3: phy@2 {
+				reg = <2>;
+			};
+
+			phy_port4: phy@3 {
+				reg = <3>;
+			};
+
+			phy_port5: phy@4 {
+				reg = <4>;
+			};
+		};
 	};
 };
 

target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-wxr-2533dhp.dts

@@ -195,25 +195,103 @@
 	pinctrl-0 = <&mdio0_pins>;
 	pinctrl-names = "default";
 
-	ethernet-phy@0 {
+	switch@10 {
+		compatible = "qca,qca8337";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x10>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
 				reg = <0>;
-		qca,ar8327-initvals = <
+				label = "cpu";
-			0x00004 0x07600000  /* PAD0_MODE */
+				ethernet = <&gmac1>;
-			0x00008 0x01000000  /* PAD5_MODE */
+				phy-mode = "rgmii";
-			0x0000c 0x00000080  /* PAD6_MODE */
+				tx-internal-delay-ps = <1000>;
-			0x00050 0xcc35cc35  /* LED_CTRL0 */
+				rx-internal-delay-ps = <1000>;
-			0x00054 0xca35ca35  /* LED_CTRL1 */
+
-			0x00058 0xc935c935  /* LED_CTRL2 */
+				fixed-link {
-			0x0005c 0x03ffff00  /* LED_CTRL3 */
+					speed = <1000>;
-			0x000e4 0x0006a545  /* MAC_POWER_SEL */
+					full-duplex;
-			0x000e0 0xc74164de  /* SGMII_CTRL */
+				};
-			0x0007c 0x0000007e  /* PORT0_STATUS */
-			0x00094 0x0000007e  /* PORT6_STATUS */
-			>;
 			};
 
-	ethernet-phy@4 {
+			port@1 {
+				reg = <1>;
+				label = "lan1";
+				phy-mode = "internal";
+				phy-handle = <&phy_port1>;
+			};
+
+			port@2 {
+				reg = <2>;
+				label = "lan2";
+				phy-mode = "internal";
+				phy-handle = <&phy_port2>;
+			};
+
+			port@3 {
+				reg = <3>;
+				label = "lan3";
+				phy-mode = "internal";
+				phy-handle = <&phy_port3>;
+			};
+
+			port@4 {
 				reg = <4>;
+				label = "lan4";
+				phy-mode = "internal";
+				phy-handle = <&phy_port4>;
+			};
+
+			port@5 {
+				reg = <5>;
+				label = "wan";
+				phy-mode = "internal";
+				phy-handle = <&phy_port5>;
+			};
+
+			port@6 {
+				reg = <6>;
+				label = "cpu";
+				ethernet = <&gmac2>;
+				phy-mode = "sgmii";
+				qca,sgmii-enable-pll;
+
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+		};
+
+		mdio {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			phy_port1: phy@0 {
+				reg = <0>;
+			};
+
+			phy_port2: phy@1 {
+				reg = <1>;
+			};
+
+			phy_port3: phy@2 {
+				reg = <2>;
+			};
+
+			phy_port4: phy@3 {
+				reg = <3>;
+			};
+
+			phy_port5: phy@4 {
+				reg = <4>;
+			};
+		};
 	};
 };
 

target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065-nbg6817.dts

@@ -245,40 +245,103 @@
 	pinctrl-0 = <&mdio0_pins>;
 	pinctrl-names = "default";
 
+	switch@10 {
+		compatible = "qca,qca8337";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x10>;
 
-	phy0: ethernet-phy@0 {
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
 				reg = <0>;
-		qca,ar8327-initvals = <
+				label = "cpu";
-			0x00004 0x7600000   /* PAD0_MODE */
+				ethernet = <&gmac1>;
-			0x00008 0x1000000   /* PAD5_MODE */
+				phy-mode = "rgmii";
-			0x0000c 0x80        /* PAD6_MODE */
+				tx-internal-delay-ps = <1000>;
-			0x000e4 0xaa545     /* MAC_POWER_SEL */
+				rx-internal-delay-ps = <1000>;
-			0x000e0 0xc74164de  /* SGMII_CTRL */
+
-			0x0007c 0x4e        /* PORT0_STATUS */
+				fixed-link {
-			0x00094 0x4e        /* PORT6_STATUS */
+					speed = <1000>;
-			0x00970 0x1e864443  /* QM_PORT0_CTRL0 */
+					full-duplex;
-			0x00974 0x000001c6  /* QM_PORT0_CTRL1 */
+				};
-			0x00978 0x19008643  /* QM_PORT1_CTRL0 */
-			0x0097c 0x000001c6  /* QM_PORT1_CTRL1 */
-			0x00980 0x19008643  /* QM_PORT2_CTRL0 */
-			0x00984 0x000001c6  /* QM_PORT2_CTRL1 */
-			0x00988 0x19008643  /* QM_PORT3_CTRL0 */
-			0x0098c 0x000001c6  /* QM_PORT3_CTRL1 */
-			0x00990 0x19008643  /* QM_PORT4_CTRL0 */
-			0x00994 0x000001c6  /* QM_PORT4_CTRL1 */
-			0x00998 0x1e864443  /* QM_PORT5_CTRL0 */
-			0x0099c 0x000001c6  /* QM_PORT5_CTRL1 */
-			0x009a0 0x1e864443  /* QM_PORT6_CTRL0 */
-			0x009a4 0x000001c6  /* QM_PORT6_CTRL1 */
-			>;
 			};
 
-	phy4: ethernet-phy@4 {
+			port@1 {
+				reg = <1>;
+				label = "lan1";
+				phy-mode = "internal";
+				phy-handle = <&phy_port1>;
+			};
+
+			port@2 {
+				reg = <2>;
+				label = "lan2";
+				phy-mode = "internal";
+				phy-handle = <&phy_port2>;
+			};
+
+			port@3 {
+				reg = <3>;
+				label = "lan3";
+				phy-mode = "internal";
+				phy-handle = <&phy_port3>;
+			};
+
+			port@4 {
 				reg = <4>;
-		qca,ar8327-initvals = <
+				label = "lan4";
-			0x000e4 0x6a545     /* MAC_POWER_SEL */
+				phy-mode = "internal";
-			0x0000c 0x80        /* PAD6_MODE */
+				phy-handle = <&phy_port4>;
-			>;
+			};
+
+			port@5 {
+				reg = <5>;
+				label = "wan";
+				phy-mode = "internal";
+				phy-handle = <&phy_port5>;
+			};
+
+			port@6 {
+				reg = <6>;
+				label = "cpu";
+				ethernet = <&gmac2>;
+				phy-mode = "sgmii";
+				qca,sgmii-enable-pll;
+
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+		};
+
+		mdio {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			phy_port1: phy@0 {
+				reg = <0>;
+			};
+
+			phy_port2: phy@1 {
+				reg = <1>;
+			};
+
+			phy_port3: phy@2 {
+				reg = <2>;
+			};
+
+			phy_port4: phy@3 {
+				reg = <3>;
+			};
+
+			phy_port5: phy@4 {
+				reg = <4>;
+			};
+		};
 	};
 };
 

target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065-nighthawk.dtsi

@@ -302,43 +302,103 @@
 	pinctrl-0 = <&mdio0_pins>;
 	pinctrl-names = "default";
 
-	phy0: ethernet-phy@0 {
+	switch@10 {
+		compatible = "qca,qca8337";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x10>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
 				reg = <0>;
-		qca,ar8327-initvals = <
+				label = "cpu";
-			0x00004 0x7600000   /* PAD0_MODE */
+				ethernet = <&gmac1>;
-			0x00008 0x1000000   /* PAD5_MODE */
+				phy-mode = "rgmii";
-			0x0000c 0x80        /* PAD6_MODE */
+				tx-internal-delay-ps = <1000>;
-			0x000e4 0xaa545     /* MAC_POWER_SEL */
+				rx-internal-delay-ps = <1000>;
-			0x000e0 0xc74164de  /* SGMII_CTRL */
+
-			0x0007c 0x4e        /* PORT0_STATUS */
+				fixed-link {
-			0x00094 0x4e        /* PORT6_STATUS */
+					speed = <1000>;
-			0x00970 0x1e864443  /* QM_PORT0_CTRL0 */
+					full-duplex;
-			0x00974 0x000001c6  /* QM_PORT0_CTRL1 */
+				};
-			0x00978 0x19008643  /* QM_PORT1_CTRL0 */
-			0x0097c 0x000001c6  /* QM_PORT1_CTRL1 */
-			0x00980 0x19008643  /* QM_PORT2_CTRL0 */
-			0x00984 0x000001c6  /* QM_PORT2_CTRL1 */
-			0x00988 0x19008643  /* QM_PORT3_CTRL0 */
-			0x0098c 0x000001c6  /* QM_PORT3_CTRL1 */
-			0x00990 0x19008643  /* QM_PORT4_CTRL0 */
-			0x00994 0x000001c6  /* QM_PORT4_CTRL1 */
-			0x00998 0x1e864443  /* QM_PORT5_CTRL0 */
-			0x0099c 0x000001c6  /* QM_PORT5_CTRL1 */
-			0x009a0 0x1e864443  /* QM_PORT6_CTRL0 */
-			0x009a4 0x000001c6  /* QM_PORT6_CTRL1 */
-			>;
-		qca,ar8327-vlans = <
-			0x1	0x5e	    /* VLAN1 Ports 1/2/3/4/6 */
-			0x2	0x21	    /* VLAN2 Ports 0/5 */
-		>;
 			};
 
-	phy4: ethernet-phy@4 {
+			port@1 {
+				reg = <1>;
+				label = "lan4";
+				phy-mode = "internal";
+				phy-handle = <&phy_port1>;
+			};
+
+			port@2 {
+				reg = <2>;
+				label = "lan3";
+				phy-mode = "internal";
+				phy-handle = <&phy_port2>;
+			};
+
+			port@3 {
+				reg = <3>;
+				label = "lan2";
+				phy-mode = "internal";
+				phy-handle = <&phy_port3>;
+			};
+
+			port@4 {
 				reg = <4>;
-		qca,ar8327-initvals = <
+				label = "lan1";
-			0x000e4 0x6a545     /* MAC_POWER_SEL */
+				phy-mode = "internal";
-			0x0000c 0x80        /* PAD6_MODE */
+				phy-handle = <&phy_port4>;
-			>;
+			};
+
+			port@5 {
+				reg = <5>;
+				label = "wan";
+				phy-mode = "internal";
+				phy-handle = <&phy_port5>;
+			};
+
+			port@6 {
+				reg = <6>;
+				label = "cpu";
+				ethernet = <&gmac2>;
+				phy-mode = "sgmii";
+				qca,sgmii-enable-pll;
+
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+		};
+
+		mdio {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			phy_port1: phy@0 {
+				reg = <0>;
+			};
+
+			phy_port2: phy@1 {
+				reg = <1>;
+			};
+
+			phy_port3: phy@2 {
+				reg = <2>;
+			};
+
+			phy_port4: phy@3 {
+				reg = <3>;
+			};
+
+			phy_port5: phy@4 {
+				reg = <4>;
+			};
+		};
 	};
 };
 

target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065-rt4230w-rev6.dts

@@ -2,6 +2,7 @@
 
 #include "qcom-ipq8065-smb208.dtsi"
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
 
 / {
 	model = "Askey RT4230W REV6";
@@ -297,19 +298,198 @@
 	pinctrl-0 = <&mdio0_pins>;
 	pinctrl-names = "default";
 
-	phy0: ethernet-phy@0 {
+	switch@10 {
-		reg = <0x0>;
+		compatible = "qca,qca8337";
-		qca,ar8327-initvals = <
+		#address-cells = <1>;
-			0x00004 0x7600000   /* PAD0_MODE */
+		#size-cells = <0>;
-			0x00008 0x1000000   /* PAD5_MODE */
+		reg = <0x10>;
-			0x0000c 0x80        /* PAD6_MODE */
+
-			0x000e4 0xaa545     /* MAC_POWER_SEL */
+		ports {
-			0x000e0 0xc74164de  /* SGMII_CTRL */
+			#address-cells = <1>;
-			0x0007c 0x4e        /* PORT0_STATUS */
+			#size-cells = <0>;
-			0x00094 0x4e        /* PORT6_STATUS */
+
-			0x00050 0xcf02cf02  /* LED_CTRL_0 */
+			port@0 {
-			0x00054 0xc832c832  /* LED_CTRL_1 */
+				reg = <0>;
-			>;
+				label = "cpu";
+				ethernet = <&gmac0>;
+				phy-mode = "rgmii";
+				tx-internal-delay-ps = <1000>;
+				rx-internal-delay-ps = <1000>;
+
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				label = "wan";
+				phy-mode = "internal";
+				phy-handle = <&phy_port1>;
+
+				leds {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					led@0 {
+						reg = <0>;
+						color = <LED_COLOR_ID_GREEN>;
+						function = LED_FUNCTION_WAN;
+						default-state = "keep";
+					};
+
+					led@1 {
+						reg = <1>;
+						color = <LED_COLOR_ID_AMBER>;
+						function = LED_FUNCTION_WAN;
+						default-state = "keep";
+					};
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+				label = "lan1";
+				phy-mode = "internal";
+				phy-handle = <&phy_port2>;
+
+				leds {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					led@0 {
+						reg = <0>;
+						color = <LED_COLOR_ID_GREEN>;
+						function = LED_FUNCTION_LAN;
+						default-state = "keep";
+					};
+
+					led@1 {
+						reg = <1>;
+						color = <LED_COLOR_ID_AMBER>;
+						function = LED_FUNCTION_LAN;
+						default-state = "keep";
+					};
+				};
+			};
+
+			port@3 {
+				reg = <3>;
+				label = "lan2";
+				phy-mode = "internal";
+				phy-handle = <&phy_port3>;
+
+				leds {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					led@0 {
+						reg = <0>;
+						color = <LED_COLOR_ID_GREEN>;
+						function = LED_FUNCTION_LAN;
+						default-state = "keep";
+					};
+
+					led@1 {
+						reg = <1>;
+						color = <LED_COLOR_ID_AMBER>;
+						function = LED_FUNCTION_LAN;
+						default-state = "keep";
+					};
+				};
+			};
+
+			port@4 {
+				reg = <4>;
+				label = "lan3";
+				phy-mode = "internal";
+				phy-handle = <&phy_port4>;
+
+				leds {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					led@0 {
+						reg = <0>;
+						color = <LED_COLOR_ID_GREEN>;
+						function = LED_FUNCTION_LAN;
+						default-state = "keep";
+					};
+
+					led@1 {
+						reg = <1>;
+						color = <LED_COLOR_ID_AMBER>;
+						function = LED_FUNCTION_LAN;
+						default-state = "keep";
+					};
+				};
+			};
+
+			port@5 {
+				reg = <5>;
+				label = "lan4";
+				phy-mode = "internal";
+				phy-handle = <&phy_port5>;
+
+				leds {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					led@0 {
+						reg = <0>;
+						color = <LED_COLOR_ID_GREEN>;
+						function = LED_FUNCTION_LAN;
+						default-state = "keep";
+					};
+
+					led@1 {
+						reg = <1>;
+						color = <LED_COLOR_ID_AMBER>;
+						function = LED_FUNCTION_LAN;
+						default-state = "keep";
+					};
+				};
+			};
+
+			port@6 {
+				reg = <6>;
+				label = "cpu";
+				ethernet = <&gmac1>;
+				phy-mode = "sgmii";
+				qca,sgmii-enable-pll;
+
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+		};
+
+		mdio {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			phy_port1: phy@0 {
+				reg = <0>;
+			};
+
+			phy_port2: phy@1 {
+				reg = <1>;
+			};
+
+			phy_port3: phy@2 {
+				reg = <2>;
+			};
+
+			phy_port4: phy@3 {
+				reg = <3>;
+			};
+
+			phy_port5: phy@4 {
+				reg = <4>;
+			};
+		};
 	};
 };
 

target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065-tr4400-v2.dts

@@ -311,17 +311,92 @@
 	pinctrl-0 = <&mdio0_pins>;
 	pinctrl-names = "default";
 
-	ethernet-phy@0 {
+	switch@10 {
-		reg = <0x0>;
+		compatible = "qca,qca8337";
-		qca,ar8327-initvals = <
+		#address-cells = <1>;
-			0x00004 0x7600000   /* PAD0_MODE */
+		#size-cells = <0>;
-			0x00008 0x1000000   /* PAD5_MODE */
+		reg = <0x10>;
-			0x0000c 0x80        /* PAD6_MODE */
+
-			0x000e4 0xaa545     /* MAC_POWER_SEL */
+		ports {
-			0x000e0 0xc74164de  /* SGMII_CTRL */
+			#address-cells = <1>;
-			0x0007c 0x4e        /* PORT0_STATUS */
+			#size-cells = <0>;
-			0x00094 0x4e        /* PORT6_STATUS */
+
-			>;
+			port@0 {
+				reg = <0>;
+				label = "cpu";
+				ethernet = <&gmac0>;
+				phy-mode = "rgmii";
+				tx-internal-delay-ps = <1000>;
+				rx-internal-delay-ps = <1000>;
+
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				label = "lan1";
+				phy-mode = "internal";
+				phy-handle = <&phy_port1>;
+			};
+
+			port@2 {
+				reg = <2>;
+				label = "lan2";
+				phy-mode = "internal";
+				phy-handle = <&phy_port2>;
+			};
+
+			port@3 {
+				reg = <3>;
+				label = "lan3";
+				phy-mode = "internal";
+				phy-handle = <&phy_port3>;
+			};
+
+			port@4 {
+				reg = <4>;
+				label = "lan4";
+				phy-mode = "internal";
+				phy-handle = <&phy_port4>;
+			};
+
+			port@6 {
+				reg = <6>;
+				label = "cpu";
+				ethernet = <&gmac1>;
+				phy-mode = "sgmii";
+				qca,sgmii-enable-pll;
+
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+		};
+
+		mdio {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			phy_port1: phy@0 {
+				reg = <0>;
+			};
+
+			phy_port2: phy@1 {
+				reg = <1>;
+			};
+
+			phy_port3: phy@2 {
+				reg = <2>;
+			};
+
+			phy_port4: phy@3 {
+				reg = <3>;
+			};
+		};
 	};
 
 	phy7: ethernet-phy@7 {

target/linux/ipq806x/image/chromium.mk

@@ -1,3 +1,8 @@
+define Device/dsa-migration
+  DEVICE_COMPAT_VERSION := 1.1
+  DEVICE_COMPAT_MESSAGE := Config cannot be migrated from swconfig to DSA
+endef
+
 define Build/cros-gpt
 	cp $@ $@.tmp 2>/dev/null || true
 	ptgen -o $@.tmp -g \
@@ -47,6 +52,7 @@ endef
 
 define Device/asus_onhub
 	$(call Device/OnhubImage)
+	$(Device/dsa-migration)
 	DEVICE_VENDOR := ASUS
 	DEVICE_MODEL := OnHub SRT-AC1900
 	DEVICE_DTS := $$(SOC)-asus-onhub
@@ -56,6 +62,7 @@ TARGET_DEVICES += asus_onhub
 
 define Device/tplink_onhub
 	$(call Device/OnhubImage)
+	$(Device/dsa-migration)
 	DEVICE_VENDOR := TP-Link
 	DEVICE_MODEL := OnHub AC1900 Cloud Router
 	DEVICE_DTS := $$(SOC)-tplink-onhub

target/linux/ipq806x/image/generic.mk

@@ -8,6 +8,16 @@ define Device/kernel-size-migration
 	use the force flag when image check fails. Settings will be lost. ***
 endef
 
+define Device/dsa-migration
+  DEVICE_COMPAT_VERSION := 1.1
+  DEVICE_COMPAT_MESSAGE := Config cannot be migrated from swconfig to DSA
+endef
+
+define Device/dsa-migration-from-2_0
+  DEVICE_COMPAT_VERSION := 2.1
+  DEVICE_COMPAT_MESSAGE := Config cannot be migrated from swconfig to DSA
+endef
+
 define Build/buffalo-rootfs-cksum
 	( \
 		echo -ne "\x$$(od -A n -t u1 $@ | tr -s ' ' '\n' | \
@@ -67,6 +77,7 @@ endef
 
 define Device/arris_tr4400-v2
 	$(call Device/LegacyImage)
+	$(Device/dsa-migration)
 	DEVICE_VENDOR := Arris
 	DEVICE_MODEL := TR4400
 	DEVICE_VARIANT := v2
@@ -80,6 +91,7 @@ TARGET_DEVICES += arris_tr4400-v2
 
 define Device/askey_rt4230w-rev6
 	$(call Device/LegacyImage)
+	$(Device/dsa-migration)
 	DEVICE_VENDOR := Askey
 	DEVICE_MODEL := RT4230W
 	DEVICE_VARIANT := REV6
@@ -94,6 +106,7 @@ TARGET_DEVICES += askey_rt4230w-rev6
 define Device/asrock_g10
 	$(call Device/FitImage)
 	$(call Device/UbiFit)
+	$(Device/dsa-migration)
 	SOC := qcom-ipq8064
 	DEVICE_VENDOR := ASRock
 	DEVICE_MODEL := G10
@@ -107,6 +120,7 @@ TARGET_DEVICES += asrock_g10
 
 define Device/buffalo_wxr-2533dhp
 	$(call Device/LegacyImage)
+	$(Device/dsa-migration)
 	SOC := qcom-ipq8064
 	DEVICE_VENDOR := Buffalo
 	DEVICE_MODEL := WXR-2533DHP
@@ -123,6 +137,7 @@ TARGET_DEVICES += buffalo_wxr-2533dhp
 define Device/compex_wpq864
 	$(call Device/FitImage)
 	$(call Device/UbiFit)
+	$(Device/dsa-migration)
 	DEVICE_VENDOR := Compex
 	DEVICE_MODEL := WPQ864
 	BLOCKSIZE := 128k
@@ -148,6 +163,7 @@ TARGET_DEVICES += edgecore_ecw5410
 define Device/linksys_ea7500-v1
 	$(call Device/LegacyImage)
 	$(Device/kernel-size-migration)
+	$(Device/dsa-migration-from-2_0)
 	DEVICE_VENDOR := Linksys
 	DEVICE_MODEL := EA7500
 	DEVICE_VARIANT := v1
@@ -168,6 +184,7 @@ TARGET_DEVICES += linksys_ea7500-v1
 define Device/linksys_ea8500
 	$(call Device/LegacyImage)
 	$(Device/kernel-size-migration)
+	$(Device/dsa-migration-from-2_0)
 	DEVICE_VENDOR := Linksys
 	DEVICE_MODEL := EA8500
 	SOC := qcom-ipq8064
@@ -223,6 +240,7 @@ TARGET_DEVICES += meraki_mr52
 
 define Device/nec_wg2600hp
 	$(call Device/LegacyImage)
+	$(Device/dsa-migration)
 	DEVICE_VENDOR := NEC
 	DEVICE_MODEL := Aterm WG2600HP
 	SOC := qcom-ipq8064
@@ -236,6 +254,7 @@ TARGET_DEVICES += nec_wg2600hp
 
 define Device/nec_wg2600hp3
 	$(call Device/LegacyImage)
+	$(Device/dsa-migration)
 	DEVICE_VENDOR := NEC Platforms
 	DEVICE_MODEL := Aterm WG2600HP3
 	SOC := qcom-ipq8062
@@ -252,6 +271,7 @@ TARGET_DEVICES += nec_wg2600hp3
 
 define Device/netgear_d7800
 	$(call Device/DniImage)
+	$(Device/dsa-migration)
 	DEVICE_VENDOR := NETGEAR
 	DEVICE_MODEL := Nighthawk X4 D7800
 	SOC := qcom-ipq8064
@@ -271,6 +291,7 @@ TARGET_DEVICES += netgear_d7800
 
 define Device/netgear_r7500
 	$(call Device/DniImage)
+	$(Device/dsa-migration)
 	DEVICE_VENDOR := NETGEAR
 	DEVICE_MODEL := Nighthawk X4 R7500
 	DEVICE_VARIANT := v1
@@ -288,6 +309,7 @@ TARGET_DEVICES += netgear_r7500
 
 define Device/netgear_r7500v2
 	$(call Device/DniImage)
+	$(Device/dsa-migration)
 	DEVICE_VENDOR := NETGEAR
 	DEVICE_MODEL := Nighthawk X4 R7500
 	DEVICE_VARIANT := v2
@@ -306,6 +328,7 @@ TARGET_DEVICES += netgear_r7500v2
 
 define Device/netgear_r7800
 	$(call Device/DniImage)
+	$(Device/dsa-migration)
 	DEVICE_VENDOR := NETGEAR
 	DEVICE_MODEL := Nighthawk X4S R7800
 	SOC := qcom-ipq8065
@@ -322,6 +345,7 @@ TARGET_DEVICES += netgear_r7800
 
 define Device/netgear_xr450
 	$(call Device/DniImage)
+	$(Device/dsa-migration)
 	DEVICE_VENDOR := NETGEAR
 	DEVICE_MODEL := Nighthawk XR450
 	SOC := qcom-ipq8065
@@ -336,6 +360,7 @@ TARGET_DEVICES += netgear_xr450
 
 define Device/netgear_xr500
 	$(call Device/DniImage)
+	$(Device/dsa-migration)
 	DEVICE_VENDOR := NETGEAR
 	DEVICE_MODEL := Nighthawk XR500
 	SOC := qcom-ipq8065
@@ -351,6 +376,7 @@ TARGET_DEVICES += netgear_xr500
 define Device/nokia_ac400i
 	$(call Device/FitImage)
 	$(call Device/UbiFit)
+	$(Device/dsa-migration)
 	DEVICE_VENDOR := Nokia
 	DEVICE_MODEL := AC400i
 	SOC := qcom-ipq8065
@@ -365,6 +391,7 @@ TARGET_DEVICES += nokia_ac400i
 define Device/qcom_ipq8064-ap148
 	$(call Device/FitImage)
 	$(call Device/UbiFit)
+	$(Device/dsa-migration)
 	DEVICE_VENDOR := Qualcomm
 	DEVICE_MODEL := AP148
 	DEVICE_VARIANT := standard
@@ -382,6 +409,7 @@ TARGET_DEVICES += qcom_ipq8064-ap148
 define Device/qcom_ipq8064-ap148-legacy
 	$(call Device/LegacyImage)
 	$(call Device/UbiFit)
+	$(Device/dsa-migration)
 	DEVICE_VENDOR := Qualcomm
 	DEVICE_MODEL := AP148
 	DEVICE_VARIANT := legacy
@@ -398,6 +426,7 @@ TARGET_DEVICES += qcom_ipq8064-ap148-legacy
 define Device/qcom_ipq8064-ap161
 	$(call Device/FitImage)
 	$(call Device/UbiFit)
+	$(Device/dsa-migration)
 	DEVICE_VENDOR := Qualcomm
 	DEVICE_MODEL := AP161
 	SOC := qcom-ipq8064
@@ -412,6 +441,7 @@ TARGET_DEVICES += qcom_ipq8064-ap161
 
 define Device/qcom_ipq8064-db149
 	$(call Device/FitImage)
+	$(Device/dsa-migration)
 	DEVICE_VENDOR := Qualcomm
 	DEVICE_MODEL := DB149
 	SOC := qcom-ipq8064
@@ -423,6 +453,7 @@ endef
 TARGET_DEVICES += qcom_ipq8064-db149
 
 define Device/ruijie_rg-mtfi-m520
+	$(Device/dsa-migration)
 	DEVICE_VENDOR := Ruijie
 	DEVICE_MODEL := RG-MTFi-M520
 	SOC := qcom-ipq8064
@@ -441,6 +472,7 @@ TARGET_DEVICES += ruijie_rg-mtfi-m520
 
 define Device/tplink_ad7200
 	$(call Device/TpSafeImage)
+	$(Device/dsa-migration)
 	DEVICE_VENDOR := TP-Link
 	DEVICE_MODEL := AD7200
 	DEVICE_VARIANT := v1/v2
@@ -457,6 +489,7 @@ TARGET_DEVICES += tplink_ad7200
 
 define Device/tplink_c2600
 	$(call Device/TpSafeImage)
+	$(Device/dsa-migration)
 	DEVICE_VENDOR := TP-Link
 	DEVICE_MODEL := Archer C2600
 	DEVICE_VARIANT := v1
@@ -471,6 +504,7 @@ endef
 TARGET_DEVICES += tplink_c2600
 
 define Device/tplink_vr2600v
+	$(Device/dsa-migration)
 	DEVICE_VENDOR := TP-Link
 	DEVICE_MODEL := Archer VR2600v
 	DEVICE_VARIANT := v1
@@ -504,6 +538,7 @@ TARGET_DEVICES += ubnt_unifi-ac-hd
 
 define Device/xiaomi_mi-router-hd
 	$(call Device/LegacyImage)
+	$(Device/dsa-migration)
 	DEVICE_VENDOR := Xiaomi
 	DEVICE_MODEL := Mi Router HD
 	SOC := qcom-ipq8064
@@ -520,6 +555,7 @@ endef
 TARGET_DEVICES += xiaomi_mi-router-hd
 
 define Device/zyxel_nbg6817
+	$(Device/dsa-migration)
 	DEVICE_VENDOR := ZyXEL
 	DEVICE_MODEL := NBG6817
 	SOC := qcom-ipq8065

target/linux/realtek/patches-5.15/710-net-phy-sfp-re-probe-modules-on-DEV_UP-event.patch

@@ -10,7 +10,7 @@ Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
 
 --- a/drivers/net/phy/sfp.c
 +++ b/drivers/net/phy/sfp.c
-@@ -2153,6 +2153,13 @@ static void sfp_sm_module(struct sfp *sf
+@@ -2160,6 +2160,13 @@ static void sfp_sm_module(struct sfp *sf
  		return;
  	}
  

target/linux/realtek/patches-5.15/712-net-phy-sfp-add-support-for-SMBus.patch

@@ -10,7 +10,7 @@ Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
 
 --- a/drivers/net/phy/sfp.c
 +++ b/drivers/net/phy/sfp.c
-@@ -549,32 +549,72 @@ static int sfp_i2c_write(struct sfp *sfp
+@@ -556,32 +556,72 @@ static int sfp_i2c_write(struct sfp *sfp
  	return ret == ARRAY_SIZE(msgs) ? len : 0;
  }