ath79: move D-Link DAP-1720 A1 to tiny sub-target

This device only has 64 MiB RAM and ath10k wireless driver will
consume a lot of memory. Let's move it to the tiny sub-target to
get extra 7 MiB of free space. In this way, we can extend their
lifetime to receive support for the next OpenWrt LTS version. This
patch also trims the duplicate "recovery.bin" image as it's the
same as the "factory.bin".

Signed-off-by: Shiji Yang <yangshiji66@qq.com>

target/linux/ath79/generic/base-files/etc/board.d/01_leds

@@ -242,13 +242,6 @@ dlink,dap-1365-a1)
 	ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "green:rssimediumhigh" "wlan0" "51" "100"
 	ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "green:rssihigh" "wlan0" "76" "100"
 	;;
-dlink,dap-1720-a1)
-	ucidef_set_rssimon "wlan0" "200000" "1"
-	ucidef_set_led_rssi "rssilow" "RSSI LOW" "red:signal-1" "wlan0" "1" "40"
-	ucidef_set_led_rssi "rssimediumlow" "RSSI MEDIUM-LOW" "green:signal-1" "wlan0" "21" "100"
-	ucidef_set_led_rssi "rssimediumhigh" "RSSI MEDIUM-HIGH" "green:signal-2" "wlan0" "61" "100"
-	ucidef_set_led_rssi "rssihigh" "RSSI HIGH" "green:signal-3" "wlan0" "81" "100"
-	;;
 engenius,ens202ext-v1|\
 engenius,enstationac-v1)
 	ucidef_set_rssimon "wlan0" "200000" "1"

target/linux/ath79/generic/base-files/etc/board.d/02_network

@@ -34,7 +34,6 @@ ath79_setup_interfaces()
 	devolo,dvl1750x|\
 	dlink,dap-1330-a1|\
 	dlink,dap-1365-a1|\
-	dlink,dap-1720-a1|\
 	dlink,dap-2230-a1|\
 	dlink,dap-2660-a1|\
 	dlink,dap-2680-a1|\

target/linux/ath79/generic/base-files/etc/uci-defaults/09_fix-checksum

@@ -21,7 +21,6 @@ dlink,dap-3320-a1|\
 dlink,dap-3662-a1)
 	fixwrgg
 	;;
-dlink,dap-1720-a1|\
 dlink,dir-629-a1|\
 qihoo,c301)
 	fix_seama_header

target/linux/ath79/image/generic.mk

@@ -1050,22 +1050,6 @@ define Device/dlink_dap-1365-a1
 endef
 TARGET_DEVICES += dlink_dap-1365-a1
 
-define Device/dlink_dap-1720-a1
-  $(Device/seama)
-  SOC := qca9563
-  DEVICE_VENDOR := D-Link
-  DEVICE_MODEL := DAP-1720
-  DEVICE_VARIANT := A1
-  DEVICE_PACKAGES := rssileds -swconfig \
-	kmod-ath10k-ct-smallbuffers ath10k-firmware-qca988x-ct
-  SEAMA_SIGNATURE := wapac28_dlink.2015_dap1720
-  IMAGE_SIZE := 15872k
-  IMAGES += recovery.bin
-  IMAGE/recovery.bin := $$(IMAGE/default) | pad-rootfs -x 64 | seama | \
-	seama-seal | check-size
-endef
-TARGET_DEVICES += dlink_dap-1720-a1
-
 define Device/dlink_dap-2xxx
   IMAGES += factory.img
   IMAGE/factory.img := append-kernel | pad-offset 6144k 160 | \

target/linux/ath79/image/tiny.mk

@@ -12,6 +12,19 @@ define Device/buffalo_whr-g301n
 endef
 TARGET_DEVICES += buffalo_whr-g301n
 
+define Device/dlink_dap-1720-a1
+  $(Device/seama)
+  SOC := qca9563
+  DEVICE_VENDOR := D-Link
+  DEVICE_MODEL := DAP-1720
+  DEVICE_VARIANT := A1
+  IMAGE_SIZE := 15872k
+  SEAMA_SIGNATURE := wapac28_dlink.2015_dap1720
+  DEVICE_PACKAGES := -swconfig ath10k-firmware-qca988x-ct \
+	kmod-ath10k-ct-smallbuffers rssileds
+endef
+TARGET_DEVICES += dlink_dap-1720-a1
+
 define Device/dlink_dir-615-e4
   SOC := ar7240
   DEVICE_VENDOR := D-Link

target/linux/ath79/tiny/base-files/etc/board.d/01_leds

@@ -20,6 +20,13 @@ tplink,tl-wr941-v4)
 	ucidef_set_led_switch "lan3" "LAN3" "green:lan3" "switch0" "0x08"
 	ucidef_set_led_switch "lan4" "LAN4" "green:lan4" "switch0" "0x10"
 	;;
+dlink,dap-1720-a1)
+	ucidef_set_rssimon "wlan0" "200000" "1"
+	ucidef_set_led_rssi "rssilow" "RSSI LOW" "red:signal-1" "wlan0" "1" "40"
+	ucidef_set_led_rssi "rssimediumlow" "RSSI MEDIUM-LOW" "green:signal-1" "wlan0" "21" "100"
+	ucidef_set_led_rssi "rssimediumhigh" "RSSI MEDIUM-HIGH" "green:signal-2" "wlan0" "61" "100"
+	ucidef_set_led_rssi "rssihigh" "RSSI HIGH" "green:signal-3" "wlan0" "81" "100"
+	;;
 dlink,dir-859-a1)
 	ucidef_set_led_switch "internet" "INTERNET" "green:internet" "switch0" "0x20"
 	;;

target/linux/ath79/tiny/base-files/etc/board.d/02_network

@@ -12,27 +12,7 @@ ath79_setup_interfaces()
 		ucidef_add_switch "switch0" \
 			"0@eth1" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1"
 		;;
-	dlink,dir-615-e4|\
+	dlink,dap-1720-a1|\
-	netgear,wnr1000-v2|\
-	netgear,wnr2000-v3|\
-	netgear,wnr612-v2|\
-	on,n150r|\
-	tplink,tl-wr740n-v1|\
-	tplink,tl-wr740n-v3|\
-	tplink,tl-wr741-v1|\
-	tplink,tl-wr743nd-v1|\
-	tplink,tl-wr841-v5|\
-	tplink,tl-wr941-v4)
-		ucidef_set_interface_wan "eth0"
-		ucidef_add_switch "switch0" \
-			"0@eth1" "1:lan" "2:lan" "3:lan" "4:lan"
-		;;
-	dlink,dir-859-a1|\
-	dlink,dir-859-a3|\
-	dlink,dir-869-a1)
-		ucidef_add_switch "switch0" \
-			"0@eth0" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5:wan"
-		;;
 	engenius,eap350-v1|\
 	engenius,ecb350-v1|\
 	pqi,air-pen|\
@@ -63,6 +43,27 @@ ath79_setup_interfaces()
 	ubnt,nanostation-loco-m)
 		ucidef_set_interface_lan "eth0"
 		;;
+	dlink,dir-615-e4|\
+	netgear,wnr1000-v2|\
+	netgear,wnr2000-v3|\
+	netgear,wnr612-v2|\
+	on,n150r|\
+	tplink,tl-wr740n-v1|\
+	tplink,tl-wr740n-v3|\
+	tplink,tl-wr741-v1|\
+	tplink,tl-wr743nd-v1|\
+	tplink,tl-wr841-v5|\
+	tplink,tl-wr941-v4)
+		ucidef_set_interface_wan "eth0"
+		ucidef_add_switch "switch0" \
+			"0@eth1" "1:lan" "2:lan" "3:lan" "4:lan"
+		;;
+	dlink,dir-859-a1|\
+	dlink,dir-859-a3|\
+	dlink,dir-869-a1)
+		ucidef_add_switch "switch0" \
+			"0@eth0" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5:wan"
+		;;
 	engenius,enh202-v1)
 		ucidef_set_interface_lan "eth0"
 		ucidef_add_switch "switch0" \

target/linux/ath79/tiny/base-files/etc/uci-defaults/09_fix-checksum

@@ -8,6 +8,7 @@ fix_seama_header() {
 board=$(board_name)
 
 case "$board" in
+dlink,dap-1720-a1|\
 dlink,dir-859-a1|\
 dlink,dir-859-a3|\
 dlink,dir-869-a1)