From b42eea0c2f68ea4903e952287a08511dd0a03072 Mon Sep 17 00:00:00 2001 From: Robert Senderek Date: Sun, 10 Dec 2023 13:49:10 +0100 Subject: [PATCH 1/6] mediatek: enable mt7981-wo-firmware package by default Add support for wireless offload package in default configuration for -Cudy WR3000 -Confiabits MT7981 For some reason those ware missing. I confirm this work for my Cudy WR3000 Signed-off-by: Robert Senderek --- target/linux/mediatek/image/filogic.mk | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/target/linux/mediatek/image/filogic.mk b/target/linux/mediatek/image/filogic.mk index 7af96674d9..ab242e2635 100644 --- a/target/linux/mediatek/image/filogic.mk +++ b/target/linux/mediatek/image/filogic.mk @@ -324,7 +324,7 @@ define Device/confiabits_mt7981 IMAGE_SIZE := 65536k KERNEL_IN_UBI := 1 IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata - DEVICE_PACKAGES := kmod-usb3 kmod-mt7981-firmware + DEVICE_PACKAGES := kmod-usb3 kmod-mt7981-firmware mt7981-wo-firmware endef TARGET_DEVICES += confiabits_mt7981 @@ -343,7 +343,7 @@ define Device/cudy_wr3000-v1 KERNEL_INITRAMFS := kernel-bin | lzma | \ fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k IMAGE/sysupgrade.bin := append-kernel | pad-to 128k | append-rootfs | pad-rootfs | check-size | append-metadata - DEVICE_PACKAGES := kmod-mt7981-firmware + DEVICE_PACKAGES := kmod-mt7981-firmware mt7981-wo-firmware endef TARGET_DEVICES += cudy_wr3000-v1 From 0e4f49a90d09c13e60d23ef34e230403708dfdaf Mon Sep 17 00:00:00 2001 From: Shiji Yang Date: Fri, 15 Dec 2023 12:36:00 +0000 Subject: [PATCH 2/6] ramips: remove useless resets properties from SoC dtsi These drivers don't request reset control. And most reset properties even have incorrect reset source definitions. 1. interrupt controller, ref: arch/mips/ralink/irq.c 2. memory controller, ref: arch/mips/ralink/of.c 3. gpio controller, ref: drivers/gpio/gpio-ralink.c (local patch) 4. systic, ref: arch/mips/ralink/cevt-rt3352.c 5. pwm, ref: drivers/pwm/pwm-mediatek-ramips.c (local patch) Tested on MT7620 && MT7628. Signed-off-by: Shiji Yang --- target/linux/ramips/dts/mt7620a.dtsi | 12 ------------ target/linux/ramips/dts/mt7620n.dtsi | 12 ------------ target/linux/ramips/dts/mt7621.dtsi | 3 --- target/linux/ramips/dts/mt7628an.dtsi | 9 --------- target/linux/ramips/dts/rt3050.dtsi | 9 --------- target/linux/ramips/dts/rt3352.dtsi | 5 ----- target/linux/ramips/dts/rt3883.dtsi | 9 --------- target/linux/ramips/dts/rt5350.dtsi | 9 --------- 8 files changed, 68 deletions(-) diff --git a/target/linux/ramips/dts/mt7620a.dtsi b/target/linux/ramips/dts/mt7620a.dtsi index 87cd119792..a1dfa8c730 100644 --- a/target/linux/ramips/dts/mt7620a.dtsi +++ b/target/linux/ramips/dts/mt7620a.dtsi @@ -74,9 +74,6 @@ compatible = "ralink,mt7620a-intc", "ralink,rt2880-intc"; reg = <0x200 0x100>; - resets = <&sysc 19>; - reset-names = "intc"; - interrupt-controller; #interrupt-cells = <1>; @@ -88,9 +85,6 @@ compatible = "ralink,mt7620a-memc", "ralink,rt3050-memc"; reg = <0x300 0x100>; - resets = <&sysc 20>; - reset-names = "mc"; - interrupt-parent = <&intc>; interrupts = <3>; }; @@ -115,9 +109,6 @@ compatible = "ralink,mt7620a-gpio", "ralink,rt2880-gpio"; reg = <0x600 0x34>; - resets = <&sysc 13>; - reset-names = "pio"; - interrupt-parent = <&intc>; interrupts = <6>; @@ -285,9 +276,6 @@ compatible = "ralink,mt7620a-systick", "ralink,cevt-systick"; reg = <0xd00 0x10>; - resets = <&sysc 28>; - reset-names = "intc"; - interrupt-parent = <&cpuintc>; interrupts = <7>; }; diff --git a/target/linux/ramips/dts/mt7620n.dtsi b/target/linux/ramips/dts/mt7620n.dtsi index 3299dea0f0..f4a5165704 100644 --- a/target/linux/ramips/dts/mt7620n.dtsi +++ b/target/linux/ramips/dts/mt7620n.dtsi @@ -74,9 +74,6 @@ compatible = "ralink,mt7620a-intc", "ralink,rt2880-intc"; reg = <0x200 0x100>; - resets = <&sysc 19>; - reset-names = "intc"; - interrupt-controller; #interrupt-cells = <1>; @@ -88,9 +85,6 @@ compatible = "ralink,mt7620a-memc", "ralink,rt3050-memc"; reg = <0x300 0x100>; - resets = <&sysc 20>; - reset-names = "mc"; - interrupt-parent = <&intc>; interrupts = <3>; }; @@ -99,9 +93,6 @@ compatible = "ralink,mt7620a-gpio", "ralink,rt2880-gpio"; reg = <0x600 0x34>; - resets = <&sysc 13>; - reset-names = "pio"; - interrupt-parent = <&intc>; interrupts = <6>; @@ -247,9 +238,6 @@ compatible = "ralink,mt7620a-systick", "ralink,cevt-systick"; reg = <0xd00 0x10>; - resets = <&sysc 28>; - reset-names = "intc"; - interrupt-parent = <&cpuintc>; interrupts = <7>; }; diff --git a/target/linux/ramips/dts/mt7621.dtsi b/target/linux/ramips/dts/mt7621.dtsi index 4d82aa327b..888c14cec0 100644 --- a/target/linux/ramips/dts/mt7621.dtsi +++ b/target/linux/ramips/dts/mt7621.dtsi @@ -124,9 +124,6 @@ compatible = "ralink,mt7621-systick", "ralink,cevt-systick"; reg = <0x500 0x10>; - resets = <&sysc MT7621_RST_AUX_STCK>; - reset-names = "intc"; - interrupt-parent = <&gic>; interrupts = ; }; diff --git a/target/linux/ramips/dts/mt7628an.dtsi b/target/linux/ramips/dts/mt7628an.dtsi index d6c3a47b0b..ddc3011aab 100644 --- a/target/linux/ramips/dts/mt7628an.dtsi +++ b/target/linux/ramips/dts/mt7628an.dtsi @@ -55,9 +55,6 @@ compatible = "ralink,mt7628an-intc", "ralink,rt2880-intc"; reg = <0x200 0x100>; - resets = <&sysc 9>; - reset-names = "intc"; - interrupt-controller; #interrupt-cells = <1>; @@ -73,9 +70,6 @@ compatible = "ralink,mt7620a-memc", "ralink,rt3050-memc"; reg = <0x300 0x100>; - resets = <&sysc 10>; - reset-names = "mc"; - interrupt-parent = <&intc>; interrupts = <3>; }; @@ -220,9 +214,6 @@ reg = <0x5000 0x1000>; #pwm-cells = <2>; - resets = <&sysc 31>; - reset-names = "pwm"; - pinctrl-names = "default"; pinctrl-0 = <&pwm0_pins>, <&pwm1_pins>; diff --git a/target/linux/ramips/dts/rt3050.dtsi b/target/linux/ramips/dts/rt3050.dtsi index eb508ed9d3..4d70773ed1 100644 --- a/target/linux/ramips/dts/rt3050.dtsi +++ b/target/linux/ramips/dts/rt3050.dtsi @@ -73,9 +73,6 @@ compatible = "ralink,rt3050-intc", "ralink,rt2880-intc"; reg = <0x200 0x100>; - resets = <&sysc 19>; - reset-names = "intc"; - interrupt-controller; #interrupt-cells = <1>; @@ -87,9 +84,6 @@ compatible = "ralink,rt3050-memc"; reg = <0x300 0x100>; - resets = <&sysc 20>; - reset-names = "mc"; - interrupt-parent = <&intc>; interrupts = <3>; }; @@ -123,9 +117,6 @@ 20 24 28 2c 30 34 ]; - resets = <&sysc 13>; - reset-names = "pio"; - interrupt-parent = <&intc>; interrupts = <6>; }; diff --git a/target/linux/ramips/dts/rt3352.dtsi b/target/linux/ramips/dts/rt3352.dtsi index df07776723..0ac3227ce0 100644 --- a/target/linux/ramips/dts/rt3352.dtsi +++ b/target/linux/ramips/dts/rt3352.dtsi @@ -85,9 +85,6 @@ compatible = "ralink,rt3352-memc", "ralink,rt3050-memc"; reg = <0x300 0x100>; - resets = <&sysc 20>; - reset-names = "mc"; - interrupt-parent = <&intc>; interrupts = <3>; }; @@ -120,8 +117,6 @@ ralink,register-map = [ 00 04 08 0c 20 24 28 2c 30 34 ]; - resets = <&sysc 13>; - reset-names = "pio"; interrupt-parent = <&intc>; interrupts = <6>; diff --git a/target/linux/ramips/dts/rt3883.dtsi b/target/linux/ramips/dts/rt3883.dtsi index d490d700d6..148922e8b9 100644 --- a/target/linux/ramips/dts/rt3883.dtsi +++ b/target/linux/ramips/dts/rt3883.dtsi @@ -74,9 +74,6 @@ compatible = "ralink,rt3883-intc", "ralink,rt2880-intc"; reg = <0x200 0x100>; - resets = <&sysc 19>; - reset-names = "intc"; - interrupt-controller; #interrupt-cells = <1>; @@ -88,9 +85,6 @@ compatible = "ralink,rt3883-memc", "ralink,rt3050-memc"; reg = <0x300 0x100>; - resets = <&sysc 20>; - reset-names = "mc"; - interrupt-parent = <&intc>; interrupts = <3>; }; @@ -115,9 +109,6 @@ compatible = "ralink,rt3883-gpio", "ralink,rt2880-gpio"; reg = <0x600 0x34>; - resets = <&sysc 13>; - reset-names = "pio"; - interrupt-parent = <&intc>; interrupts = <6>; diff --git a/target/linux/ramips/dts/rt5350.dtsi b/target/linux/ramips/dts/rt5350.dtsi index 1286dec9d8..9bbbc611ed 100644 --- a/target/linux/ramips/dts/rt5350.dtsi +++ b/target/linux/ramips/dts/rt5350.dtsi @@ -74,9 +74,6 @@ compatible = "ralink,rt5350-intc", "ralink,rt2880-intc"; reg = <0x200 0x100>; - resets = <&sysc 19>; - reset-names = "intc"; - interrupt-controller; #interrupt-cells = <1>; @@ -88,9 +85,6 @@ compatible = "ralink,rt5350-memc", "ralink,rt3050-memc"; reg = <0x300 0x100>; - resets = <&sysc 20>; - reset-names = "mc"; - interrupt-parent = <&intc>; interrupts = <3>; }; @@ -115,9 +109,6 @@ compatible = "ralink,rt5350-gpio", "ralink,rt2880-gpio"; reg = <0x600 0x34>; - resets = <&sysc 13>; - reset-names = "pio"; - interrupt-parent = <&intc>; interrupts = <6>; From b17cc131c61e6ed8b85d776050c666617794fa41 Mon Sep 17 00:00:00 2001 From: Shiji Yang Date: Sun, 24 Dec 2023 11:05:56 +0000 Subject: [PATCH 3/6] ramips: remove systick node for mt7621 SoC dtsi This node is useless because MT7621 uses the generic mips systick driver instead of the ralink systick driver. Signed-off-by: Shiji Yang --- target/linux/ramips/dts/mt7621.dtsi | 8 -------- 1 file changed, 8 deletions(-) diff --git a/target/linux/ramips/dts/mt7621.dtsi b/target/linux/ramips/dts/mt7621.dtsi index 888c14cec0..086719a43d 100644 --- a/target/linux/ramips/dts/mt7621.dtsi +++ b/target/linux/ramips/dts/mt7621.dtsi @@ -120,14 +120,6 @@ status = "disabled"; }; - systick: systick@500 { - compatible = "ralink,mt7621-systick", "ralink,cevt-systick"; - reg = <0x500 0x10>; - - interrupt-parent = <&gic>; - interrupts = ; - }; - memc: memory-controller@5000 { compatible = "mediatek,mt7621-memc", "syscon"; reg = <0x5000 0x1000>; From 39e55bdbe27a09579658178796a9b732e126e703 Mon Sep 17 00:00:00 2001 From: David Bentham Date: Sun, 24 Dec 2023 13:33:23 +0000 Subject: [PATCH 4/6] ramips: correct the PCIe port number for Unielec u7621-01 MT7621 gets a new PCIe driver in the 5.15+ kernel. Allocating wrong PCIe port will cause the PCIe NIC to not work properly. This commit fixes the wrong port numbers on Unielec u7621-01. According to the bootlog, MT7612E (5 GHz) is connected to pcie2, and MT7603E (2 GHz) is connected to pcie1: [ 1.294844] mt7621-pci 1e140000.pcie: pcie0 no card, disable it (RST & CLK) [ 1.308635] mt7621-pci 1e140000.pcie: PCIE1 enabled [ 1.318277] mt7621-pci 1e140000.pcie: PCIE2 enabled Also correct the led activity for the MT7603e - not used on the MT7612e Signed-off-by: David Bentham --- .../linux/ramips/dts/mt7621_unielec_u7621-01.dtsi | 13 ++++++------- 1 file changed, 6 insertions(+), 7 deletions(-) diff --git a/target/linux/ramips/dts/mt7621_unielec_u7621-01.dtsi b/target/linux/ramips/dts/mt7621_unielec_u7621-01.dtsi index 3252783524..813ddc7327 100644 --- a/target/linux/ramips/dts/mt7621_unielec_u7621-01.dtsi +++ b/target/linux/ramips/dts/mt7621_unielec_u7621-01.dtsi @@ -50,27 +50,26 @@ status = "okay"; }; -&pcie0 { +&pcie1 { // MT7603EN wifi@0,0 { compatible = "mediatek,mt76"; reg = <0x0000 0 0 0 0>; nvmem-cells = <&eeprom_factory_0>; nvmem-cell-names = "eeprom"; - ieee80211-freq-limit = <2400000 2500000>; + + led { + led-active-low; + }; }; }; -&pcie1 { +&pcie2 { // MT7612E wifi@0,0 { compatible = "mediatek,mt76"; reg = <0x0000 0 0 0 0>; nvmem-cells = <&eeprom_factory_8000>; nvmem-cell-names = "eeprom"; ieee80211-freq-limit = <5000000 6000000>; - - led { - led-sources = <2>; - }; }; }; From d737ae99cb36f693167265a372bf3fa4f97f9730 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Samir=20Ibrad=C5=BEi=C4=87?= Date: Sun, 17 Dec 2023 16:58:06 +0900 Subject: [PATCH 5/6] qualcommax: Fix Buffalo WXR-5950AX12 Ethernet DTS MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit * Revert the switch_lan_bmp and switch_wan_bmp to match the values from the original device support DTS * Add specific malibu_first_phy_addr, as it differs from default for this device Fixes: #14234 Reviewed-by: Robert Marko Tested-by: Samir Ibradžić # Buffalo WXR-6000AX12P Signed-off-by: Samir Ibradžić --- .../files/arch/arm64/boot/dts/qcom/ipq8074-wxr-5950ax12.dts | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8074-wxr-5950ax12.dts b/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8074-wxr-5950ax12.dts index 18386c766c..325a391ca0 100644 --- a/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8074-wxr-5950ax12.dts +++ b/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8074-wxr-5950ax12.dts @@ -267,8 +267,9 @@ &switch { status = "okay"; - switch_lan_bmp = <(ESS_PORT1 | ESS_PORT2 | ESS_PORT3 | ESS_PORT4 | ESS_PORT6)>; - switch_wan_bmp = ; + switch_lan_bmp = <(ESS_PORT1 | ESS_PORT2 | ESS_PORT3 | ESS_PORT4 | ESS_PORT5)>; + switch_wan_bmp = ; + malibu_first_phy_addr = <0x18>; switch_mac_mode = ; switch_mac_mode1 = ; switch_mac_mode2 = ; From 4300bc668819a77226b6e8ea079d3067f216e7bb Mon Sep 17 00:00:00 2001 From: Ian Oderon Date: Sat, 9 Dec 2023 12:48:35 +0800 Subject: [PATCH 6/6] mediatek: add support for Zbtlink ZBT-Z8103AX Specifications: SoC: MediaTek MT7981B RAM: 256MiB Flash: SPI-NAND 128 MiB Switch: 1 WAN, 3 LAN (Gigabit) Buttons: Reset, Mesh Power: DC 12V 1A WiFi: MT7976CN UART: 115200n8 UART Layout: VCC-RX-TX-GND No. of Antennas: 6 Note: Upon opening the router, only 5 antennas were connected to the mainboard. Led Layout: Power-Mesh-5gwifi-WAN-LAN3-LAN2-LAN1-2gWiFi Buttons: Reset-Mesh Installation: A. Through OpenWrt Dashboard: If your router comes with OpenWrt preinstalled (modified by the seller), you can easily upgrade by going to the dashboard (192.168.1.1) and then navigate to System -> Backup/Flash firmware, then flash the firmware B. Through TFTP Standard installation via UART: 1. Connect USB Serial Adapter to the UART, (NOTE: Don't connect the VCC pin). 2. Power on the router. Make sure that you can access your router via UART. 3. Restart the router then repeatedly press ctrl + c to skip default boot. 4. Type > bootmenu 5. Press '2' to select upgrade firmware 6. Press 'Y' on 'Run image after upgrading?' 7. Press '0' and hit 'enter' to select TFTP client (default) 8. Fill the U-Boot's IP address and TFTP server's IP address. 9. Finally, enter the 'firmware' filename. Signed-off-by: Ian Oderon --- .../uboot-envtools/files/mediatek_filogic | 3 +- .../dts/mt7981b-zbtlink-zbt-z8103ax.dts | 269 ++++++++++++++++++ .../filogic/base-files/etc/board.d/01_leds | 3 + .../filogic/base-files/etc/board.d/02_network | 3 +- .../etc/hotplug.d/ieee80211/11_fix_wifi_mac | 1 + target/linux/mediatek/image/filogic.mk | 17 ++ 6 files changed, 294 insertions(+), 2 deletions(-) create mode 100644 target/linux/mediatek/dts/mt7981b-zbtlink-zbt-z8103ax.dts diff --git a/package/boot/uboot-envtools/files/mediatek_filogic b/package/boot/uboot-envtools/files/mediatek_filogic index 050e1173c3..dd6726713b 100644 --- a/package/boot/uboot-envtools/files/mediatek_filogic +++ b/package/boot/uboot-envtools/files/mediatek_filogic @@ -56,7 +56,8 @@ cmcc,rax3000m) ;; cetron,ct3003|\ netgear,wax220|\ -zbtlink,zbt-z8102ax) +zbtlink,zbt-z8102ax|\ +zbtlink,zbt-z8103ax) ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x20000" "0x20000" ;; h3c,magic-nx30-pro|\ diff --git a/target/linux/mediatek/dts/mt7981b-zbtlink-zbt-z8103ax.dts b/target/linux/mediatek/dts/mt7981b-zbtlink-zbt-z8103ax.dts new file mode 100644 index 0000000000..2b079f5bca --- /dev/null +++ b/target/linux/mediatek/dts/mt7981b-zbtlink-zbt-z8103ax.dts @@ -0,0 +1,269 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +/dts-v1/; + +#include "mt7981.dtsi" + +/ { + model = "Zbtlink ZBT-Z8103AX"; + compatible = "zbtlink,zbt-z8103ax", "mediatek,mt7981"; + + aliases { + serial0 = &uart0; + led-boot = &led_status_green; + led-failsafe = &led_status_red; + led-running = &led_status_green; + led-upgrade = &led_status_green; + label-mac-device = &gmac0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + bootargs = "earlycon=uart8250,mmio32,0x11002000 console=ttyS0,115200n8 loglevel=8"; + }; + + memory { + reg = <0 0x40000000 0 0x10000000>; + }; + + gpio-keys { + compatible = "gpio-keys"; + + button-mesh { + label = "mesh"; + linux,code = ; + linux,input-type = ; + gpios = <&pio 0 GPIO_ACTIVE_HIGH>; + }; + + button-reset { + label = "reset"; + linux,code = ; + gpios = <&pio 1 GPIO_ACTIVE_LOW>; + }; + }; + + leds { + compatible = "gpio-leds"; + + led-wan { + color = ; + function = LED_FUNCTION_WAN; + gpios = <&pio 8 GPIO_ACTIVE_LOW>; + }; + + led-status-blue { + color = ; + function = LED_FUNCTION_STATUS; + gpios = <&pio 23 GPIO_ACTIVE_HIGH>; + }; + + led_status_green: led-status-green { + color = ; + function = LED_FUNCTION_STATUS; + gpios = <&pio 24 GPIO_ACTIVE_LOW>; + }; + + led_status_red: led-status-red { + color = ; + function = LED_FUNCTION_STATUS; + gpios = <&pio 25 GPIO_ACTIVE_LOW>; + }; + + led-wlan2g { + color = ; + function = LED_FUNCTION_WLAN; + gpios = <&pio 34 GPIO_ACTIVE_LOW>; + function-enumerator = <0>; + linux,default-trigger = "phy0tpt"; + }; + + led-wlan5g { + color = ; + function = LED_FUNCTION_WLAN; + gpios = <&pio 35 GPIO_ACTIVE_LOW>; + function-enumerator = <1>; + linux,default-trigger = "phy1tpt"; + }; + }; +}; + +ð { + status = "okay"; + + gmac0: mac@0 { + /* LAN */ + compatible = "mediatek,eth-mac"; + reg = <0>; + phy-mode = "2500base-x"; + + nvmem-cell-names = "mac-address"; + nvmem-cells = <&macaddr_factory_4 2>; + + fixed-link { + speed = <2500>; + full-duplex; + pause; + }; + }; + + gmac1: mac@1 { + /* WAN */ + compatible = "mediatek,eth-mac"; + reg = <1>; + phy-mode = "gmii"; + phy-handle = <&int_gbe_phy>; + + nvmem-cell-names = "mac-address"; + nvmem-cells = <&macaddr_factory_4 3>; + }; +}; + +&mdio_bus { + switch: switch@1f { + compatible = "mediatek,mt7531"; + reg = <31>; + reset-gpios = <&pio 39 GPIO_ACTIVE_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&pio>; + interrupts = <38 IRQ_TYPE_LEVEL_HIGH>; + }; +}; + +&spi0 { + pinctrl-names = "default"; + pinctrl-0 = <&spi0_flash_pins>; + status = "okay"; + + spi_nand@0 { + compatible = "spi-nand"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0>; + + spi-max-frequency = <52000000>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "bl2"; + reg = <0x0000000 0x0100000>; + read-only; + }; + + partition@100000 { + label = "u-boot-env"; + reg = <0x100000 0x80000>; + }; + + partition@180000 { + label = "Factory"; + reg = <0x180000 0x200000>; + read-only; + + nvmem-layout { + compatible = "fixed-layout"; + #address-cells = <1>; + #size-cells = <1>; + + eeprom_factory: eeprom@0 { + reg = <0x0 0x1000>; + }; + + macaddr_factory_4: macaddr@4 { + compatible = "mac-base"; + reg = <0x4 0x6>; + #nvmem-cell-cells = <1>; + }; + }; + }; + + partition@380000 { + label = "FIP"; + reg = <0x380000 0x200000>; + read-only; + }; + + partition@580000 { + label = "ubi"; + reg = <0x580000 0x4000000>; + }; + }; + }; +}; + +&switch { + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "lan1"; + }; + + port@1 { + reg = <1>; + label = "lan2"; + }; + + port@2 { + reg = <2>; + label = "lan3"; + }; + + port@6 { + reg = <6>; + label = "cpu"; + ethernet = <&gmac0>; + phy-mode = "2500base-x"; + + fixed-link { + speed = <2500>; + full-duplex; + pause; + }; + }; + }; +}; + +&pio { + spi0_flash_pins: spi0-pins { + mux { + function = "spi"; + groups = "spi0", "spi0_wp_hold"; + }; + + conf-pu { + pins = "SPI0_CS", "SPI0_HOLD", "SPI0_WP"; + drive-strength = ; + bias-pull-up = ; + }; + + conf-pd { + pins = "SPI0_CLK", "SPI0_MOSI", "SPI0_MISO"; + drive-strength = ; + bias-pull-down = ; + }; + }; +}; + +&uart0 { + status = "okay"; +}; + +&watchdog { + status = "okay"; +}; + +&wifi { + status = "okay"; + nvmem-cells = <&eeprom_factory>; + nvmem-cell-names = "eeprom"; +}; diff --git a/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds b/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds index b1411d56d3..f1fd58f1d0 100644 --- a/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds +++ b/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds @@ -35,6 +35,9 @@ xiaomi,redmi-router-ax6000-stock|\ xiaomi,redmi-router-ax6000-ubootmod) ucidef_set_led_netdev "wan" "wan" "rgb:network" "wan" ;; +zbtlink,zbt-z8103ax) + ucidef_set_led_netdev "wan" "wan" "green:wan" "eth1" "link tx rx" + ;; zyxel_ex5601-t0-stock|\ zyxel,ex5601-t0-ubootmod) ucidef_set_led_netdev "lan" "LAN" "green:lan" "eth0" "link tx rx" diff --git a/target/linux/mediatek/filogic/base-files/etc/board.d/02_network b/target/linux/mediatek/filogic/base-files/etc/board.d/02_network index 1c41a9f8ed..4ffb7e53bf 100644 --- a/target/linux/mediatek/filogic/base-files/etc/board.d/02_network +++ b/target/linux/mediatek/filogic/base-files/etc/board.d/02_network @@ -33,7 +33,8 @@ mediatek_setup_interfaces() ucidef_set_interfaces_lan_wan "lan1 lan2 lan3" wan ;; cmcc,rax3000m|\ - h3c,magic-nx30-pro) + h3c,magic-nx30-pro|\ + zbtlink,zbt-z8103ax) ucidef_set_interfaces_lan_wan "lan1 lan2 lan3" eth1 ;; glinet,gl-mt2500|\ diff --git a/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac b/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac index 7f1d0c5364..bf7426fbee 100644 --- a/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac +++ b/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac @@ -105,6 +105,7 @@ case "$board" in [ "$PHYNBR" = "1" ] && macaddr_add $addr 1 > /sys${DEVPATH}/macaddress ;; zbtlink,zbt-z8102ax|\ + zbtlink,zbt-z8103ax|\ zyxel,ex5601-t0|\ zyxel,ex5601-t0-ubootmod) addr=$(mtd_get_mac_binary "Factory" 0x4) diff --git a/target/linux/mediatek/image/filogic.mk b/target/linux/mediatek/image/filogic.mk index ab242e2635..afbdfefd6f 100644 --- a/target/linux/mediatek/image/filogic.mk +++ b/target/linux/mediatek/image/filogic.mk @@ -831,6 +831,23 @@ define Device/zbtlink_zbt-z8102ax endef TARGET_DEVICES += zbtlink_zbt-z8102ax +define Device/zbtlink_zbt-z8103ax + DEVICE_VENDOR := Zbtlink + DEVICE_MODEL := ZBT-Z8103AX + DEVICE_DTS := mt7981b-zbtlink-zbt-z8103ax + DEVICE_DTS_DIR := ../dts + DEVICE_PACKAGES := kmod-mt7981-firmware mt7981-wo-firmware + KERNEL_IN_UBI := 1 + UBINIZE_OPTS := -E 5 + BLOCKSIZE := 128k + PAGESIZE := 2048 + IMAGE_SIZE := 65536k + IMAGES += factory.bin + IMAGE/factory.bin := append-ubi | check-size $$(IMAGE_SIZE) + IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata +endef +TARGET_DEVICES += zbtlink_zbt-z8103ax + define Device/zyxel_ex5601-t0-stock DEVICE_VENDOR := Zyxel DEVICE_MODEL := EX5601-T0