Merge Official Source

Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>

include/image.mk

@@ -346,6 +346,7 @@ define Device/InitProfile
   DEVICE_ALT2_TITLE = $$(DEVICE_ALT2_VENDOR) $$(DEVICE_ALT2_MODEL)$$(if $$(DEVICE_ALT2_VARIANT), $$(DEVICE_ALT2_VARIANT))
   DEVICE_ALT3_TITLE = $$(DEVICE_ALT3_VENDOR) $$(DEVICE_ALT3_MODEL)$$(if $$(DEVICE_ALT3_VARIANT), $$(DEVICE_ALT3_VARIANT))
   DEVICE_ALT4_TITLE = $$(DEVICE_ALT4_VENDOR) $$(DEVICE_ALT4_MODEL)$$(if $$(DEVICE_ALT4_VARIANT), $$(DEVICE_ALT4_VARIANT))
+  DEVICE_ALT5_TITLE = $$(DEVICE_ALT5_VENDOR) $$(DEVICE_ALT5_MODEL)$$(if $$(DEVICE_ALT5_VARIANT), $$(DEVICE_ALT5_VARIANT))
   DEVICE_VENDOR :=
   DEVICE_MODEL :=
   DEVICE_VARIANT :=
@@ -364,6 +365,9 @@ define Device/InitProfile
   DEVICE_ALT4_VENDOR :=
   DEVICE_ALT4_MODEL :=
   DEVICE_ALT4_VARIANT :=
+  DEVICE_ALT5_VENDOR :=
+  DEVICE_ALT5_MODEL :=
+  DEVICE_ALT5_VARIANT :=
   DEVICE_PACKAGES :=
   DEVICE_DESCRIPTION = Build firmware images for $$(DEVICE_TITLE)
 endef
@@ -448,7 +452,8 @@ DEFAULT_DEVICE_VARS := \
   DEVICE_ALT1_VENDOR DEVICE_ALT1_MODEL DEVICE_ALT1_VARIANT \
   DEVICE_ALT2_VENDOR DEVICE_ALT2_MODEL DEVICE_ALT2_VARIANT \
   DEVICE_ALT3_VENDOR DEVICE_ALT3_MODEL DEVICE_ALT3_VARIANT \
-  DEVICE_ALT4_VENDOR DEVICE_ALT4_MODEL DEVICE_ALT4_VARIANT
+  DEVICE_ALT4_VENDOR DEVICE_ALT4_MODEL DEVICE_ALT4_VARIANT \
+  DEVICE_ALT5_VENDOR DEVICE_ALT5_MODEL DEVICE_ALT5_VARIANT
 
 define Device/ExportVar
   $(1) : $(2):=$$($(2))
@@ -537,6 +542,9 @@ define Device/Build/initramfs
 	DEVICE_ALT4_VENDOR="$$(DEVICE_ALT4_VENDOR)" \
 	DEVICE_ALT4_MODEL="$$(DEVICE_ALT4_MODEL)" \
 	DEVICE_ALT4_VARIANT="$$(DEVICE_ALT4_VARIANT)" \
+	DEVICE_ALT5_VENDOR="$$(DEVICE_ALT5_VENDOR)" \
+	DEVICE_ALT5_MODEL="$$(DEVICE_ALT5_MODEL)" \
+	DEVICE_ALT5_VARIANT="$$(DEVICE_ALT5_VARIANT)" \
 	DEVICE_TITLE="$$(DEVICE_TITLE)" \
 	DEVICE_PACKAGES="$$(DEVICE_PACKAGES)" \
 	TARGET="$(BOARD)" \
@@ -668,6 +676,9 @@ define Device/Build/image
 	DEVICE_ALT4_VENDOR="$(DEVICE_ALT4_VENDOR)" \
 	DEVICE_ALT4_MODEL="$(DEVICE_ALT4_MODEL)" \
 	DEVICE_ALT4_VARIANT="$(DEVICE_ALT4_VARIANT)" \
+	DEVICE_ALT5_VENDOR="$(DEVICE_ALT5_VENDOR)" \
+	DEVICE_ALT5_MODEL="$(DEVICE_ALT5_MODEL)" \
+	DEVICE_ALT5_VARIANT="$(DEVICE_ALT5_VARIANT)" \
 	DEVICE_TITLE="$(DEVICE_TITLE)" \
 	DEVICE_PACKAGES="$(DEVICE_PACKAGES)" \
 	TARGET="$(BOARD)" \
@@ -719,6 +730,9 @@ define Device/Build/artifact
 	DEVICE_ALT4_VENDOR="$(DEVICE_ALT4_VENDOR)" \
 	DEVICE_ALT4_MODEL="$(DEVICE_ALT4_MODEL)" \
 	DEVICE_ALT4_VARIANT="$(DEVICE_ALT4_VARIANT)" \
+	DEVICE_ALT5_VENDOR="$(DEVICE_ALT5_VENDOR)" \
+	DEVICE_ALT5_MODEL="$(DEVICE_ALT5_MODEL)" \
+	DEVICE_ALT5_VARIANT="$(DEVICE_ALT5_VARIANT)" \
 	DEVICE_TITLE="$(DEVICE_TITLE)" \
 	DEVICE_PACKAGES="$(DEVICE_PACKAGES)" \
 	TARGET="$(BOARD)" \
@@ -762,6 +776,7 @@ $(if $(strip $(DEVICE_ALT1_TITLE)),- $(DEVICE_ALT1_TITLE))
 $(if $(strip $(DEVICE_ALT2_TITLE)),- $(DEVICE_ALT2_TITLE))
 $(if $(strip $(DEVICE_ALT3_TITLE)),- $(DEVICE_ALT3_TITLE))
 $(if $(strip $(DEVICE_ALT4_TITLE)),- $(DEVICE_ALT4_TITLE))
+$(if $(strip $(DEVICE_ALT5_TITLE)),- $(DEVICE_ALT5_TITLE))
 @@
 
 endef
@@ -787,6 +802,10 @@ ifneq ($$(strip $$(DEVICE_ALT4_TITLE)),)
 DEVICE_DISPLAY = $$(DEVICE_ALT4_TITLE) ($$(DEVICE_TITLE))
 $$(info $$(call Device/DumpInfo,$(1)))
 endif
+ifneq ($$(strip $$(DEVICE_ALT5_TITLE)),)
+DEVICE_DISPLAY = $$(DEVICE_ALT5_TITLE) ($$(DEVICE_TITLE))
+$$(info $$(call Device/DumpInfo,$(1)))
+endif
 DEVICE_DISPLAY = $$(DEVICE_TITLE)
 $$(eval $$(if $$(DEVICE_TITLE),$$(info $$(call Device/DumpInfo,$(1)))))
 endef

package/boot/uboot-envtools/files/ath79

@@ -25,6 +25,10 @@ araknis,an-300-ap-i-n|\
 araknis,an-500-ap-i-ac|\
 araknis,an-700-ap-i-ac|\
 arduino,yun|\
+asus,rt-ac59u|\
+asus,rt-ac59u-v2|\
+asus,zenwifi-cd6n|\
+asus,zenwifi-cd6r|\
 buffalo,bhr-4grv2|\
 devolo,magic-2-wifi|\
 dlink,dir-859-a1|\

package/boot/uboot-mediatek/patches/200-cmd-add-imsz-and-imszb.patch

@@ -70,7 +70,7 @@
  {
 --- a/boot/image-fit.c
 +++ b/boot/image-fit.c
-@@ -2051,6 +2051,50 @@ static const char *fit_get_image_type_pr
+@@ -2051,6 +2051,49 @@ static const char *fit_get_image_type_pr
  	return "unknown";
  }
  
@@ -89,9 +89,8 @@
 +
 +	hdrsize = fdt_totalsize(fit);
 +
-+	/* simple FIT with internal images */
++	/* take care of simple FIT with internal images */
-+	if (hdrsize > 0x1000)
++	max_size = hdrsize;
-+		return hdrsize;
 +
 +	images_noffset = fdt_path_offset(fit, FIT_IMAGES_PATH);
 +	if (images_noffset < 0) {

package/kernel/leds-ws2812b/src/leds-ws2812b.c

@@ -17,6 +17,7 @@
 #include <linux/property.h>
 #include <linux/spi/spi.h>
 #include <linux/mutex.h>
+#include <linux/version.h>
 
 #define WS2812B_BYTES_PER_COLOR 3
 #define WS2812B_NUM_COLORS 3
@@ -191,7 +192,11 @@ ERR_UNREG_LEDS:
 	return ret;
 }
 
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(5,18,0)
+static void ws2812b_remove(struct spi_device *spi)
+#else
 static int ws2812b_remove(struct spi_device *spi)
+#endif
 {
 	struct ws2812b_priv *priv = spi_get_drvdata(spi);
 	int cur_led;
@@ -201,7 +206,9 @@ static int ws2812b_remove(struct spi_device *spi)
 	kfree(priv->data_buf);
 	mutex_destroy(&priv->mutex);
 
+#if LINUX_VERSION_CODE < KERNEL_VERSION(5,18,0)
 	return 0;
+#endif
 }
 
 static const struct spi_device_id ws2812b_spi_ids[] = {

package/utils/e2fsprogs/Makefile

@@ -267,7 +267,6 @@ endef
 define Package/tune2fs/install
 	$(INSTALL_DIR) $(1)/usr/sbin
 	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/sbin/tune2fs $(1)/usr/sbin/
-	$(LN) tune2fs $(1)/usr/sbin/findfs
 endef
 
 define Package/resize2fs/install

package/utils/lua/patches-host/010-lua-5.1.3-lnum-full-260308.patch

@@ -1600,18 +1600,18 @@
 + * (and doing them).
 + */
 +int try_addint( lua_Integer *r, lua_Integer ib, lua_Integer ic ) {
-+  lua_Integer v= ib+ic; /* may overflow */
++  /* Signed int overflow is undefined behavior, so catch it without causing it. */
-+  if (ib>0 && ic>0)      { if (v < 0) return 0; /*overflow, use floats*/ }
++  if (ic>0)  { if (ib > LUA_INTEGER_MAX - ic) return 0; /*overflow, use floats*/ }
-+  else if (ib<0 && ic<0) { if (v >= 0) return 0; }
++  else       { if (ib < LUA_INTEGER_MIN - ic) return 0; }
-+  *r= v;
++  *r = ib + ic;
 +  return 1;
 +}
 +
 +int try_subint( lua_Integer *r, lua_Integer ib, lua_Integer ic ) {
-+  lua_Integer v= ib-ic; /* may overflow */
++  /* Signed int overflow is undefined behavior, so catch it without causing it. */
-+  if (ib>=0 && ic<0)     { if (v < 0) return 0; /*overflow, use floats*/ }
++  if (ic>0)  { if (ib < LUA_INTEGER_MIN + ic) return 0; /*overflow, use floats*/ }
-+  else if (ib<0 && ic>0) { if (v >= 0) return 0; }
++  else       { if (ib > LUA_INTEGER_MAX + ic) return 0; }
-+  *r= v;
++  *r = ib - ic;
 +  return 1;
 +}
 +

package/utils/lua/patches/010-lua-5.1.3-lnum-full-260308.patch

@@ -1589,18 +1589,18 @@
 + * (and doing them).
 + */
 +int try_addint( lua_Integer *r, lua_Integer ib, lua_Integer ic ) {
-+  lua_Integer v= ib+ic; /* may overflow */
++  /* Signed int overflow is undefined behavior, so catch it without causing it. */
-+  if (ib>0 && ic>0)      { if (v < 0) return 0; /*overflow, use floats*/ }
++  if (ic>0)  { if (ib > LUA_INTEGER_MAX - ic) return 0; /*overflow, use floats*/ }
-+  else if (ib<0 && ic<0) { if (v >= 0) return 0; }
++  else       { if (ib < LUA_INTEGER_MIN - ic) return 0; }
-+  *r= v;
++  *r = ib + ic;
 +  return 1;
 +}
 +
 +int try_subint( lua_Integer *r, lua_Integer ib, lua_Integer ic ) {
-+  lua_Integer v= ib-ic; /* may overflow */
++  /* Signed int overflow is undefined behavior, so catch it without causing it. */
-+  if (ib>=0 && ic<0)     { if (v < 0) return 0; /*overflow, use floats*/ }
++  if (ic>0)  { if (ib < LUA_INTEGER_MIN + ic) return 0; /*overflow, use floats*/ }
-+  else if (ib<0 && ic>0) { if (v >= 0) return 0; }
++  else       { if (ib > LUA_INTEGER_MAX + ic) return 0; }
-+  *r= v;
++  *r = ib - ic;
 +  return 1;
 +}
 +

scripts/json_add_image_info.py

@@ -21,7 +21,7 @@ if not file_path.is_file():
 
 def get_titles():
     titles = []
-    for prefix in ["", "ALT0_", "ALT1_", "ALT2_", "ALT3_", "ALT4_"]:
+    for prefix in ["", "ALT0_", "ALT1_", "ALT2_", "ALT3_", "ALT4_", "ALT5_"]:
         title = {}
         for var in ["vendor", "model", "variant"]:
             if getenv("DEVICE_{}{}".format(prefix, var.upper())):

scripts/mkits.sh

@@ -108,10 +108,10 @@ if [ -n "${DTB}" ]; then
 			${DTADDR:+load = <${DTADDR}>;}
 			arch = \"${ARCH}\";
 			compression = \"none\";
-			hash@1 {
+			hash${REFERENCE_CHAR}1 {
 				algo = \"crc32\";
 			};
-			hash@2 {
+			hash${REFERENCE_CHAR}2 {
 				algo = \"${HASH}\";
 			};
 		};
@@ -128,10 +128,10 @@ if [ -n "${INITRD}" ]; then
 			type = \"ramdisk\";
 			arch = \"${ARCH}\";
 			os = \"linux\";
-			hash@1 {
+			hash${REFERENCE_CHAR}1 {
 				algo = \"crc32\";
 			};
-			hash@2 {
+			hash${REFERENCE_CHAR}2 {
 				algo = \"${HASH}\";
 			};
 		};
@@ -150,10 +150,10 @@ if [ -n "${ROOTFS}" ]; then
 			type = \"filesystem\";
 			arch = \"${ARCH}\";
 			compression = \"none\";
-			hash@1 {
+			hash${REFERENCE_CHAR}1 {
 				algo = \"crc32\";
 			};
-			hash@2 {
+			hash${REFERENCE_CHAR}2 {
 				algo = \"${HASH}\";
 			};
 		};
@@ -181,10 +181,10 @@ OVCONFIGS=""
 			arch = \"${ARCH}\";
 			load = <${DTADDR}>;
 			compression = \"none\";
-			hash@1 {
+			hash${REFERENCE_CHAR}1 {
 				algo = \"crc32\";
 			};
-			hash@2 {
+			hash${REFERENCE_CHAR}2 {
 				algo = \"${HASH}\";
 			};
 		};
@@ -216,10 +216,10 @@ DATA="/dts-v1/;
 			compression = \"${COMPRESS}\";
 			load = <${LOAD_ADDR}>;
 			entry = <${ENTRY_ADDR}>;
-			hash@1 {
+			hash${REFERENCE_CHAR}1 {
 				algo = \"crc32\";
 			};
-			hash@2 {
+			hash${REFERENCE_CHAR}2 {
 				algo = \"$HASH\";
 			};
 		};

target/linux/apm821xx/modules.mk

@@ -23,7 +23,7 @@ define KernelPackage/hw-crypto-4xx
 	   +kmod-crypto-ccm +kmod-crypto-gcm \
 	   +kmod-crypto-sha1 +kmod-crypto-sha256 +kmod-crypto-sha512
   FILES:=$(LINUX_DIR)/drivers/crypto/amcc/crypto4xx.ko
-  AUTOLOAD:=$(call AutoLoad,09,sata_dwc_460ex,1)
+  AUTOLOAD:=$(call AutoLoad,09,crypto4xx,1)
   $(call AddDepends/crypto)
 endef
 

target/linux/armsr/armv8/config-6.1

@@ -114,7 +114,6 @@ CONFIG_CRYPTO_AES_ARM64_CE_BLK=y
 CONFIG_CRYPTO_AES_ARM64_CE_CCM=y
 CONFIG_CRYPTO_AES_ARM64_NEON_BLK=y
 CONFIG_CRYPTO_ARCH_HAVE_LIB_CHACHA=y
-CONFIG_CRYPTO_BLAKE2S=y
 CONFIG_CRYPTO_CHACHA20=y
 CONFIG_CRYPTO_CHACHA20_NEON=y
 CONFIG_CRYPTO_CRYPTD=y

target/linux/ath79/config-5.15

@@ -34,7 +34,6 @@ CONFIG_CPU_R4K_CACHE_TLB=y
 CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
 CONFIG_CPU_SUPPORTS_HIGHMEM=y
 CONFIG_CPU_SUPPORTS_MSA=y
-CONFIG_CRYPTO_BLAKE2S=y
 CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
 CONFIG_CRYPTO_LIB_POLY1305_RSIZE=2
 CONFIG_CRYPTO_RNG2=y

target/linux/ath79/dts/qcn5502_asus.dtsi

@@ -0,0 +1,114 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca956x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	aliases {
+		label-mac-device = &eth0;
+	};
+};
+
+&eth0 {
+	status = "okay";
+
+	pll-data = <0x03000101 0x00000101 0x00001919>;
+
+	phy-mode = "sgmii";
+	phy-handle = <&phy0>;
+
+	nvmem-cells = <&macaddr_factory_1002>;
+	nvmem-cell-names = "mac-address";
+};
+
+&mdio0 {
+	status = "okay";
+
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+		phy-mode = "sgmii";
+		qca,mib-poll-interval = <500>;
+
+		qca,ar8327-initvals = <
+			0x04 0x80080080 /* PORT0 PAD MODE CTRL */
+			0x08 0x00000000 /* PORT5 PAD MODE CTRL */
+			0x0c 0x00000000 /* PORT6 PAD MODE CTRL */
+			0x10 0x00000080 /* POWER_ON_STRAP */
+			0x7c 0x0000007e /* PORT0_STATUS */
+			0x94 0x00000200 /* PORT6_STATUS */
+			>;
+	};
+};
+
+&pcie {
+	status = "okay";
+
+	wifi@0,0 {
+		compatible = "qcom,ath10k";
+		reg = <0 0 0 0 0>;
+
+		nvmem-cells = <&precal_factory_5000>;
+		nvmem-cell-names = "pre-calibration";
+	};
+};
+
+&spi {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <25000000>;
+		m25p,fast-read;
+
+		mtdparts: partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "Bootloader";
+				reg = <0x000000 0x040000>;
+				read-only;
+			};
+
+			partition@40000 {
+				label = "nvram";
+				reg = <0x040000 0x010000>;
+				read-only;
+			};
+
+			partition@50000 {
+				label = "Factory";
+				reg = <0x050000 0x010000>;
+				read-only;
+
+				compatible = "nvmem-cells";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				cal_factory_1000: cal@1000 {
+					reg = <0x1000 0x440>;
+				};
+
+				macaddr_factory_1002: macaddr@1002 {
+					reg = <0x1002 0x6>;
+				};
+
+				precal_factory_5000: precal@5000 {
+					reg = <0x5000 0x2f20>;
+				};
+			};
+		};
+	};
+};
+
+&wmac {
+	/* Does not work due to lack of QCN5502 support in ath9k. */
+	status = "disabled";
+
+	nvmem-cells = <&cal_factory_1000>;
+	nvmem-cell-names = "calibration";
+};

target/linux/ath79/dts/qcn5502_asus_rt-ac59u-v2.dts

@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qcn5502_asus_rt-ac59u.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	compatible = "asus,rt-ac59u-v2", "qca,qcn5500", "qca,qca9560";
+	model = "ASUS RT-AC59U v2";
+};
+
+&mtdparts {
+	partition@60000 {
+		label = "firmware";
+		reg = <0x060000 0x1fa0000>;
+		compatible = "denx,uimage";
+	};
+};

target/linux/ath79/dts/qcn5502_asus_rt-ac59u.dts

@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qcn5502_asus_rt-ac59u.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	compatible = "asus,rt-ac59u", "qca,qcn5500", "qca,qca9560";
+	model = "ASUS RT-AC59U";
+};
+
+&mtdparts {
+	partition@60000 {
+		label = "firmware";
+		reg = <0x060000 0xfa0000>;
+		compatible = "denx,uimage";
+	};
+};

target/linux/ath79/dts/qcn5502_asus_rt-ac59u.dtsi

@@ -0,0 +1,69 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qcn5502_asus.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	aliases {
+		led-boot = &led_power;
+		led-failsafe = &led_power;
+		led-running = &led_power;
+		led-upgrade = &led_power;
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		reset {
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+			debounce-interval = <60>;
+		};
+
+		wps {
+			label = "wps";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+			debounce-interval = <60>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led_power: power {
+			label = "blue:power";
+			gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+		};
+
+		usb {
+			label = "blue:usb";
+			gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+			trigger-sources = <&hub_port0>;
+			linux,default-trigger = "usbport";
+		};
+
+		wlan2g {
+			label = "blue:wlan2g";
+			gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "phy1tpt";
+		};
+
+		wlan5g {
+			label = "blue:wlan5g";
+			gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "phy0tpt";
+		};
+	};
+};
+
+&usb_phy0 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};

target/linux/ath79/dts/qcn5502_asus_zenwifi-cd6.dtsi

@@ -0,0 +1,57 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qcn5502_asus.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	aliases {
+		led-boot = &led_blue;
+		led-failsafe = &led_red;
+		led-running = &led_blue;
+		led-upgrade = &led_red;
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		reset {
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+			debounce-interval = <60>;
+		};
+
+		wps {
+			label = "wps";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+			debounce-interval = <60>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led_blue: blue {
+			label = "blue";
+			gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
+		};
+
+		green {
+			label = "green";
+			gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+		};
+
+		led_red: red {
+			label = "red";
+			gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+		};
+
+		white {
+			label = "white";
+			gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+		};
+	};
+};

target/linux/ath79/dts/qcn5502_asus_zenwifi-cd6n.dts

@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qcn5502_asus_zenwifi-cd6.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	compatible = "asus,zenwifi-cd6n", "qca,qcn5500", "qca,qca9560";
+	model = "ASUS ZenWiFi CD6N";
+};
+
+&mtdparts {
+	partition@60000 {
+		label = "firmware";
+		reg = <0x060000 0xfa0000>;
+		compatible = "denx,uimage";
+	};
+};

target/linux/ath79/dts/qcn5502_asus_zenwifi-cd6r.dts

@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qcn5502_asus_zenwifi-cd6.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	compatible = "asus,zenwifi-cd6r", "qca,qcn5500", "qca,qca9560";
+	model = "ASUS ZenWiFi CD6R";
+};
+
+&mtdparts {
+	partition@60000 {
+		label = "firmware";
+		reg = <0x060000 0x1fa0000>;
+		compatible = "denx,uimage";
+	};
+};

target/linux/ath79/generic/base-files/etc/board.d/02_network

@@ -152,6 +152,14 @@ ath79_setup_interfaces()
 		ucidef_add_switch "switch0" \
 			"0@eth0" "1:lan:1" "2:lan:2" "3:lan:3" "6:lan:4"
 		;;
+	asus,zenwifi-cd6n)
+		ucidef_add_switch "switch0" \
+			"0@eth0" "1:lan:1" "4:lan:2"
+		;;
+	asus,zenwifi-cd6r)
+		ucidef_add_switch "switch0" \
+			"0@eth0" "1:lan:2" "3:lan:1" "4:lan:3" "2:wan"
+		;;
 	atheros,db120)
 		ucidef_add_switch "switch0" \
 			"0@eth0" "2:lan" "3:lan" "4:lan" "5:lan" "1:wan"
@@ -381,6 +389,8 @@ ath79_setup_interfaces()
 		ucidef_add_switch "switch0" \
 			"0@eth1" "1:lan"
 		;;
+	asus,rt-ac59u|\
+	asus,rt-ac59u-v2|\
 	mercury,mw4530r-v1|\
 	tplink,archer-a7-v5|\
 	tplink,archer-a9-v6|\

target/linux/ath79/image/generic.mk

@@ -483,6 +483,70 @@ define Device/asus_rp-ac66
 endef
 TARGET_DEVICES += asus_rp-ac66
 
+define Device/asus_qcn5502
+  SOC := qcn5502
+  DEVICE_VENDOR := ASUS
+  DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca9888-ct
+  KERNEL_INITRAMFS := kernel-bin | append-dtb | uImage none
+  IMAGES += factory.bin
+  IMAGE/factory.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \
+	append-rootfs | pad-rootfs
+endef
+
+define Device/asus_rt-ac59u
+  $(Device/asus_qcn5502)
+  DEVICE_MODEL := RT-AC59U
+  DEVICE_ALT0_VENDOR := ASUS
+  DEVICE_ALT0_MODEL := RT-AC1200GE
+  DEVICE_ALT1_VENDOR := ASUS
+  DEVICE_ALT1_MODEL := RT-AC1500G PLUS
+  DEVICE_ALT2_VENDOR := ASUS
+  DEVICE_ALT2_MODEL := RT-AC1500UHP
+  DEVICE_ALT3_VENDOR := ASUS
+  DEVICE_ALT3_MODEL := RT-AC57U
+  DEVICE_ALT3_VARIANT := v2
+  DEVICE_ALT4_VENDOR := ASUS
+  DEVICE_ALT4_MODEL := RT-AC58U
+  DEVICE_ALT4_VARIANT := v2
+  DEVICE_ALT5_VENDOR := ASUS
+  DEVICE_ALT5_MODEL := RT-ACRH12
+  IMAGE_SIZE := 16000k
+  DEVICE_PACKAGES += kmod-usb2 kmod-usb-ledtrig-usbport
+endef
+TARGET_DEVICES += asus_rt-ac59u
+
+define Device/asus_rt-ac59u-v2
+  $(Device/asus_qcn5502)
+  DEVICE_MODEL := RT-AC59U
+  DEVICE_VARIANT := v2
+  DEVICE_ALT0_VENDOR := ASUS
+  DEVICE_ALT0_MODEL := RT-AC1300G PLUS
+  DEVICE_ALT0_VARIANT := v3
+  DEVICE_ALT1_VENDOR := ASUS
+  DEVICE_ALT1_MODEL := RT-AC57U
+  DEVICE_ALT1_VARIANT := v3
+  DEVICE_ALT2_VENDOR := ASUS
+  DEVICE_ALT2_MODEL := RT-AC58U
+  DEVICE_ALT2_VARIANT := v3
+  IMAGE_SIZE := 32384k
+  DEVICE_PACKAGES += kmod-usb2 kmod-usb-ledtrig-usbport
+endef
+TARGET_DEVICES += asus_rt-ac59u-v2
+
+define Device/asus_zenwifi-cd6n
+  $(Device/asus_qcn5502)
+  DEVICE_MODEL := ZenWiFi CD6N
+  IMAGE_SIZE := 16000k
+endef
+TARGET_DEVICES += asus_zenwifi-cd6n
+
+define Device/asus_zenwifi-cd6r
+  $(Device/asus_qcn5502)
+  DEVICE_MODEL := ZenWiFi CD6R
+  IMAGE_SIZE := 32384k
+endef
+TARGET_DEVICES += asus_zenwifi-cd6r
+
 define Device/atheros_db120
   $(Device/loader-okli-uimage)
   SOC := ar9344

target/linux/bcm63xx/config-5.15

@@ -57,7 +57,6 @@ CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
 CONFIG_CPU_SUPPORTS_CPUFREQ=y
 CONFIG_CPU_SUPPORTS_HIGHMEM=y
 CONFIG_CRASH_CORE=y
-CONFIG_CRYPTO_BLAKE2S=y
 CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
 CONFIG_CRYPTO_LIB_POLY1305_RSIZE=2
 CONFIG_CRYPTO_RNG2=y

target/linux/generic/config-5.15

@@ -1086,7 +1086,6 @@ CONFIG_CRYPTO_ALGAPI2=y
 # CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_BLAKE2B is not set
 # CONFIG_CRYPTO_BLAKE2B_NEON is not set
-# CONFIG_CRYPTO_BLAKE2S is not set
 # CONFIG_CRYPTO_BLAKE2S_ARM is not set
 # CONFIG_CRYPTO_BLAKE2S_X86 is not set
 # CONFIG_CRYPTO_BLOWFISH is not set

target/linux/generic/config-6.1

@@ -1144,7 +1144,6 @@ CONFIG_CRYPTO_ALGAPI2=y
 # CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_BLAKE2B is not set
 # CONFIG_CRYPTO_BLAKE2B_NEON is not set
-# CONFIG_CRYPTO_BLAKE2S is not set
 # CONFIG_CRYPTO_BLAKE2S_ARM is not set
 # CONFIG_CRYPTO_BLAKE2S_X86 is not set
 # CONFIG_CRYPTO_BLOWFISH is not set
@@ -3150,6 +3149,7 @@ CONFIG_KERNFS=y
 # CONFIG_KEYBOARD_MAX7359 is not set
 # CONFIG_KEYBOARD_MCS is not set
 # CONFIG_KEYBOARD_MPR121 is not set
+# CONFIG_KEYBOARD_MT6779 is not set
 # CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_KEYBOARD_OMAP4 is not set
 # CONFIG_KEYBOARD_OPENCORES is not set
@@ -6317,6 +6317,7 @@ CONFIG_SND_SOC_INTEL_SST_TOPLEVEL=y
 # CONFIG_SND_SOC_MT6797 is not set
 # CONFIG_SND_SOC_MT8173 is not set
 # CONFIG_SND_SOC_MT8183 is not set
+# CONFIG_SND_SOC_MT8186 is not set
 # CONFIG_SND_SOC_MT8192 is not set
 # CONFIG_SND_SOC_MT8195 is not set
 # CONFIG_SND_SOC_MTK_BTCVSD is not set

target/linux/lantiq/config-5.15

@@ -37,7 +37,6 @@ CONFIG_CPU_R4K_CACHE_TLB=y
 CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
 CONFIG_CPU_SUPPORTS_HIGHMEM=y
 CONFIG_CPU_SUPPORTS_MSA=y
-CONFIG_CRYPTO_BLAKE2S=y
 CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
 CONFIG_CRYPTO_LIB_POLY1305_RSIZE=2
 CONFIG_CRYPTO_RNG2=y

target/linux/layerscape/base-files/lib/upgrade/platform.sh

@@ -3,8 +3,8 @@
 # Copyright 2020 NXP
 #
 
-RAMFS_COPY_BIN="/usr/sbin/fw_printenv /usr/sbin/fw_setenv /usr/sbin/ubinfo /bin/echo"
+RAMFS_COPY_BIN=""
-RAMFS_COPY_DATA="/etc/fw_env.config /var/lock/fw_printenv.lock"
+RAMFS_COPY_DATA=""
 
 REQUIRE_IMAGE_METADATA=1
 

target/linux/malta/config-5.15

@@ -57,7 +57,6 @@ CONFIG_CPU_RMAP=y
 CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
 CONFIG_CPU_SUPPORTS_HIGHMEM=y
 CONFIG_CRC16=y
-CONFIG_CRYPTO_BLAKE2S=y
 CONFIG_CRYPTO_CRC32=y
 CONFIG_CRYPTO_CRC32C=y
 CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y

target/linux/malta/config-6.1

@@ -58,7 +58,6 @@ CONFIG_CPU_RMAP=y
 CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
 CONFIG_CPU_SUPPORTS_HIGHMEM=y
 CONFIG_CRC16=y
-CONFIG_CRYPTO_BLAKE2S=y
 CONFIG_CRYPTO_CRC32=y
 CONFIG_CRYPTO_CRC32C=y
 CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y

target/linux/mediatek/files-5.15/arch/arm64/boot/dts/mediatek/mt7988a-dsa-10g-spim-nand.dts

@@ -156,6 +156,7 @@
 	mdio {
 		#address-cells = <1>;
 		#size-cells = <0>;
+		mediatek,pio = <&pio>;
 
 		gsw_phy0: ethernet-phy@0 {
 			compatible = "ethernet-phy-id03a2.9481";

target/linux/mediatek/files-5.15/arch/arm64/boot/dts/mediatek/mt7988a.dtsi

@@ -215,7 +215,7 @@
 		};
 
 		pio: pinctrl@1001f000 {
-			compatible = "mediatek,mt7988-pinctrl";
+			compatible = "mediatek,mt7988-pinctrl", "syscon";
 			reg = <0 0x1001f000 0 0x1000>,
 			<0 0x11c10000 0 0x1000>,
 			<0 0x11d00000 0 0x1000>,
@@ -303,11 +303,6 @@
 			};
 		};
 
-		boottrap: boottrap@1001f6f0 {
-			compatible = "mediatek,boottrap";
-			reg = <0 0x1001f6f0 0 0x4>;
-		};
-
 		sgmiisys0: syscon@10060000 {
 			compatible = "mediatek,mt7988-sgmiisys",
 				     "mediatek,mt7988-sgmiisys_0",

target/linux/mediatek/files-6.1/arch/arm64/boot/dts/mediatek/mt7988a-dsa-10g-spim-nand.dts

@@ -156,6 +156,7 @@
 	mdio {
 		#address-cells = <1>;
 		#size-cells = <0>;
+		mediatek,pio = <&pio>;
 
 		gsw_phy0: ethernet-phy@0 {
 			compatible = "ethernet-phy-id03a2.9481";

target/linux/mediatek/files-6.1/arch/arm64/boot/dts/mediatek/mt7988a.dtsi

@@ -215,7 +215,7 @@
 		};
 
 		pio: pinctrl@1001f000 {
-			compatible = "mediatek,mt7988-pinctrl";
+			compatible = "mediatek,mt7988-pinctrl", "syscon";
 			reg = <0 0x1001f000 0 0x1000>,
 			<0 0x11c10000 0 0x1000>,
 			<0 0x11d00000 0 0x1000>,
@@ -303,11 +303,6 @@
 			};
 		};
 
-		boottrap: boottrap@1001f6f0 {
-			compatible = "mediatek,boottrap";
-			reg = <0 0x1001f6f0 0 0x4>;
-		};
-
 		sgmiisys0: syscon@10060000 {
 			compatible = "mediatek,mt7988-sgmiisys",
 				     "mediatek,mt7988-sgmiisys_0",

target/linux/mediatek/mt7622/config-5.15

@@ -111,7 +111,6 @@ CONFIG_CRYPTO_AES_ARM64=y
 CONFIG_CRYPTO_AES_ARM64_CE=y
 CONFIG_CRYPTO_AES_ARM64_CE_BLK=y
 CONFIG_CRYPTO_AES_ARM64_CE_CCM=y
-CONFIG_CRYPTO_BLAKE2S=y
 CONFIG_CRYPTO_CMAC=y
 CONFIG_CRYPTO_CRC32=y
 CONFIG_CRYPTO_CRC32C=y

target/linux/mediatek/patches-5.15/730-net-phy-add-driver-for-MediaTek-SoC-built-in-GE-PHYs.patch

@@ -1,82 +0,0 @@
-From 60ed9eb9605656c19ca402b7bd3f47552e901601 Mon Sep 17 00:00:00 2001
-From: Daniel Golle <daniel@makrotopia.org>
-Date: Mon, 13 Feb 2023 02:33:14 +0000
-Subject: [PATCH] net: phy: add driver for MediaTek SoC built-in GE PHYs
-
-Some of MediaTek's Filogic SoCs come with built-in gigabit Ethernet
-PHYs which require calibration data from the SoC's efuse.
-Despite the similar design the driver doesn't share any code with the
-existing mediatek-ge.c, so add support for these PHYs by introducing a
-new driver for only MediaTek's ARM64 SoCs.
-
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
----
- MAINTAINERS                       |    9 +
- drivers/net/phy/Kconfig           |   12 +
- drivers/net/phy/Makefile          |    1 +
- drivers/net/phy/mediatek-ge-soc.c | 1263 +++++++++++++++++++++++++++++
- drivers/net/phy/mediatek-ge.c     |    3 +-
- 5 files changed, 1287 insertions(+), 1 deletion(-)
- create mode 100644 drivers/net/phy/mediatek-ge-soc.c
-
---- a/MAINTAINERS
-+++ b/MAINTAINERS
-@@ -11790,6 +11790,15 @@ S:	Maintained
- F:	drivers/net/pcs/pcs-mtk-lynxi.c
- F:	include/linux/pcs/pcs-mtk-lynxi.h
- 
-+MEDIATEK ETHERNET PHY DRIVERS
-+M:	Daniel Golle <daniel@makrotopia.org>
-+M:	Qingfang Deng <dqfext@gmail.com>
-+M:	SkyLake Huang <SkyLake.Huang@mediatek.com>
-+L:	netdev@vger.kernel.org
-+S:	Maintained
-+F:	drivers/net/phy/mediatek-ge-soc.c
-+F:	drivers/net/phy/mediatek-ge.c
-+
- MEDIATEK I2C CONTROLLER DRIVER
- M:	Qii Wang <qii.wang@mediatek.com>
- L:	linux-i2c@vger.kernel.org
---- a/drivers/net/phy/Kconfig
-+++ b/drivers/net/phy/Kconfig
-@@ -293,6 +293,18 @@ config MEDIATEK_GE_PHY
- 	help
- 	  Supports the MediaTek Gigabit Ethernet PHYs.
- 
-+config MEDIATEK_GE_SOC_PHY
-+	tristate "MediaTek SoC Ethernet PHYs"
-+	depends on (ARM64 && ARCH_MEDIATEK) || COMPILE_TEST
-+	select NVMEM_MTK_EFUSE
-+	help
-+	  Supports MediaTek SoC built-in Gigabit Ethernet PHYs.
-+
-+	  Include support for built-in Ethernet PHYs which are present in
-+	  the MT7981 and MT7988 SoCs. These PHYs need calibration data
-+	  present in the SoCs efuse and will dynamically calibrate VCM
-+	  (common-mode voltage) during startup.
-+
- config MICREL_PHY
- 	tristate "Micrel PHYs"
- 	help
---- a/drivers/net/phy/Makefile
-+++ b/drivers/net/phy/Makefile
-@@ -81,6 +81,7 @@ obj-$(CONFIG_MARVELL_PHY)	+= marvell.o
- obj-$(CONFIG_MARVELL_88X2222_PHY)	+= marvell-88x2222.o
- obj-$(CONFIG_MAXLINEAR_GPHY)	+= mxl-gpy.o
- obj-$(CONFIG_MEDIATEK_GE_PHY)	+= mediatek-ge.o
-+obj-$(CONFIG_MEDIATEK_GE_SOC_PHY)	+= mediatek-ge-soc.o
- obj-$(CONFIG_MESON_GXL_PHY)	+= meson-gxl.o
- obj-$(CONFIG_MICREL_KS8995MA)	+= spi_ks8995.o
- obj-$(CONFIG_MICREL_PHY)	+= micrel.o
---- a/drivers/net/phy/mediatek-ge.c
-+++ b/drivers/net/phy/mediatek-ge.c
-@@ -136,7 +136,8 @@ static struct phy_driver mtk_gephy_drive
- module_phy_driver(mtk_gephy_driver);
- 
- static struct mdio_device_id __maybe_unused mtk_gephy_tbl[] = {
--	{ PHY_ID_MATCH_VENDOR(0x03a29400) },
-+	{ PHY_ID_MATCH_EXACT(0x03a29441) },
-+	{ PHY_ID_MATCH_EXACT(0x03a29412) },
- 	{ }
- };
- 

target/linux/mediatek/patches-5.15/731-net-phy-hack-mxl-gpy-disable-sgmii-an.patch

@@ -1,166 +0,0 @@
---- a/drivers/net/phy/mxl-gpy.c
-+++ b/drivers/net/phy/mxl-gpy.c
-@@ -126,6 +126,12 @@ static int gpy_config_init(struct phy_de
- 	if (ret < 0)
- 		return ret;
- 
-+	/* Disable SGMII auto-negotiation */
-+	ret = phy_modify_mmd(phydev, MDIO_MMD_VEND1, VSPEC1_SGMII_CTRL,
-+			     VSPEC1_SGMII_CTRL_ANEN, 0);
-+	if (ret < 0)
-+		return ret;
-+
- 	return gpy_led_write(phydev);
- }
- 
-@@ -151,65 +157,6 @@ static int gpy_probe(struct phy_device *
- 	return 0;
- }
- 
--static bool gpy_sgmii_need_reaneg(struct phy_device *phydev)
--{
--	int fw_ver, fw_type, fw_minor;
--	size_t i;
--
--	fw_ver = phy_read(phydev, PHY_FWV);
--	if (fw_ver < 0)
--		return true;
--
--	fw_type = FIELD_GET(PHY_FWV_TYPE_MASK, fw_ver);
--	fw_minor = FIELD_GET(PHY_FWV_MINOR_MASK, fw_ver);
--
--	for (i = 0; i < ARRAY_SIZE(ver_need_sgmii_reaneg); i++) {
--		if (fw_type != ver_need_sgmii_reaneg[i].type)
--			continue;
--		if (fw_minor < ver_need_sgmii_reaneg[i].minor)
--			return true;
--		break;
--	}
--
--	return false;
--}
--
--static bool gpy_2500basex_chk(struct phy_device *phydev)
--{
--	int ret;
--
--	ret = phy_read(phydev, PHY_MIISTAT);
--	if (ret < 0) {
--		phydev_err(phydev, "Error: MDIO register access failed: %d\n",
--			   ret);
--		return false;
--	}
--
--	if (!(ret & PHY_MIISTAT_LS) ||
--	    FIELD_GET(PHY_MIISTAT_SPD_MASK, ret) != PHY_MIISTAT_SPD_2500)
--		return false;
--
--	phydev->speed = SPEED_2500;
--	phydev->interface = PHY_INTERFACE_MODE_2500BASEX;
--	phy_modify_mmd(phydev, MDIO_MMD_VEND1, VSPEC1_SGMII_CTRL,
--		       VSPEC1_SGMII_CTRL_ANEN, 0);
--	return true;
--}
--
--static bool gpy_sgmii_aneg_en(struct phy_device *phydev)
--{
--	int ret;
--
--	ret = phy_read_mmd(phydev, MDIO_MMD_VEND1, VSPEC1_SGMII_CTRL);
--	if (ret < 0) {
--		phydev_err(phydev, "Error: MMD register access failed: %d\n",
--			   ret);
--		return true;
--	}
--
--	return (ret & VSPEC1_SGMII_CTRL_ANEN) ? true : false;
--}
--
- static int gpy_config_aneg(struct phy_device *phydev)
- {
- 	bool changed = false;
-@@ -248,53 +195,11 @@ static int gpy_config_aneg(struct phy_de
- 	    phydev->interface == PHY_INTERFACE_MODE_INTERNAL)
- 		return 0;
- 
--	/* No need to trigger re-ANEG if link speed is 2.5G or SGMII ANEG is
--	 * disabled.
--	 */
--	if (!gpy_sgmii_need_reaneg(phydev) || gpy_2500basex_chk(phydev) ||
--	    !gpy_sgmii_aneg_en(phydev))
--		return 0;
--
--	/* There is a design constraint in GPY2xx device where SGMII AN is
--	 * only triggered when there is change of speed. If, PHY link
--	 * partner`s speed is still same even after PHY TPI is down and up
--	 * again, SGMII AN is not triggered and hence no new in-band message
--	 * from GPY to MAC side SGMII.
--	 * This could cause an issue during power up, when PHY is up prior to
--	 * MAC. At this condition, once MAC side SGMII is up, MAC side SGMII
--	 * wouldn`t receive new in-band message from GPY with correct link
--	 * status, speed and duplex info.
--	 *
--	 * 1) If PHY is already up and TPI link status is still down (such as
--	 *    hard reboot), TPI link status is polled for 4 seconds before
--	 *    retriggerring SGMII AN.
--	 * 2) If PHY is already up and TPI link status is also up (such as soft
--	 *    reboot), polling of TPI link status is not needed and SGMII AN is
--	 *    immediately retriggered.
--	 * 3) Other conditions such as PHY is down, speed change etc, skip
--	 *    retriggering SGMII AN. Note: in case of speed change, GPY FW will
--	 *    initiate SGMII AN.
--	 */
--
--	if (phydev->state != PHY_UP)
--		return 0;
--
--	ret = phy_read_poll_timeout(phydev, MII_BMSR, ret, ret & BMSR_LSTATUS,
--				    20000, 4000000, false);
--	if (ret == -ETIMEDOUT)
--		return 0;
--	else if (ret < 0)
--		return ret;
--
--	/* Trigger SGMII AN. */
--	return phy_modify_mmd(phydev, MDIO_MMD_VEND1, VSPEC1_SGMII_CTRL,
--			      VSPEC1_SGMII_CTRL_ANRS, VSPEC1_SGMII_CTRL_ANRS);
-+	return 0;
- }
- 
- static void gpy_update_interface(struct phy_device *phydev)
- {
--	int ret;
--
- 	/* Interface mode is fixed for USXGMII and integrated PHY */
- 	if (phydev->interface == PHY_INTERFACE_MODE_USXGMII ||
- 	    phydev->interface == PHY_INTERFACE_MODE_INTERNAL)
-@@ -306,29 +211,11 @@ static void gpy_update_interface(struct
- 	switch (phydev->speed) {
- 	case SPEED_2500:
- 		phydev->interface = PHY_INTERFACE_MODE_2500BASEX;
--		ret = phy_modify_mmd(phydev, MDIO_MMD_VEND1, VSPEC1_SGMII_CTRL,
--				     VSPEC1_SGMII_CTRL_ANEN, 0);
--		if (ret < 0)
--			phydev_err(phydev,
--				   "Error: Disable of SGMII ANEG failed: %d\n",
--				   ret);
- 		break;
- 	case SPEED_1000:
- 	case SPEED_100:
- 	case SPEED_10:
- 		phydev->interface = PHY_INTERFACE_MODE_SGMII;
--		if (gpy_sgmii_aneg_en(phydev))
--			break;
--		/* Enable and restart SGMII ANEG for 10/100/1000Mbps link speed
--		 * if ANEG is disabled (in 2500-BaseX mode).
--		 */
--		ret = phy_modify_mmd(phydev, MDIO_MMD_VEND1, VSPEC1_SGMII_CTRL,
--				     VSPEC1_SGMII_ANEN_ANRS,
--				     VSPEC1_SGMII_ANEN_ANRS);
--		if (ret < 0)
--			phydev_err(phydev,
--				   "Error: Enable of SGMII ANEG failed: %d\n",
--				   ret);
- 		break;
- 	}
- }

target/linux/mediatek/patches-5.15/731-net-phy-mediatek-ge-soc-initialize-MT7988-PHY-LEDs-d.patch

@@ -0,0 +1,213 @@
+From 5d2d78860f98eb5c03bc404eb024606878901ac8 Mon Sep 17 00:00:00 2001
+From: Daniel Golle <daniel@makrotopia.org>
+Date: Tue, 13 Jun 2023 03:27:14 +0100
+Subject: [PATCH] net: phy: mediatek-ge-soc: initialize MT7988 PHY LEDs default
+ state
+
+Initialize LEDs and set sane default values.
+Read boottrap register and apply LED polarities accordingly to get
+uniform behavior from all LEDs on MT7988.
+Requires syscon phandle 'mediatek,pio' present in parenting MDIO bus
+which should point to the syscon holding the boottrap register.
+
+Signed-off-by: Daniel Golle <daniel@makrotopia.org>
+---
+ drivers/net/phy/mediatek-ge-soc.c | 144 ++++++++++++++++++++++++++++--
+ 1 file changed, 136 insertions(+), 8 deletions(-)
+
+--- a/drivers/net/phy/mediatek-ge-soc.c
++++ b/drivers/net/phy/mediatek-ge-soc.c
+@@ -1,11 +1,13 @@
+ // SPDX-License-Identifier: GPL-2.0+
+ #include <linux/bitfield.h>
++#include <linux/mfd/syscon.h>
+ #include <linux/module.h>
+ #include <linux/nvmem-consumer.h>
+ #include <linux/of_address.h>
+ #include <linux/of_platform.h>
+ #include <linux/pinctrl/consumer.h>
+ #include <linux/phy.h>
++#include <linux/regmap.h>
+ 
+ #define MTK_GPHY_ID_MT7981			0x03a29461
+ #define MTK_GPHY_ID_MT7988			0x03a29481
+@@ -208,9 +210,40 @@
+ #define MTK_PHY_DA_TX_R50_PAIR_C		0x53f
+ #define MTK_PHY_DA_TX_R50_PAIR_D		0x540
+ 
++/* Registers on MDIO_MMD_VEND2 */
++#define MTK_PHY_LED0_ON_CTRL			0x24
++#define MTK_PHY_LED1_ON_CTRL			0x26
++#define   MTK_PHY_LED_ON_MASK			GENMASK(6, 0)
++#define   MTK_PHY_LED_ON_LINK1000		BIT(0)
++#define   MTK_PHY_LED_ON_LINK100		BIT(1)
++#define   MTK_PHY_LED_ON_LINK10			BIT(2)
++#define   MTK_PHY_LED_ON_LINKDOWN		BIT(3)
++#define   MTK_PHY_LED_ON_FDX			BIT(4) /* Full duplex */
++#define   MTK_PHY_LED_ON_HDX			BIT(5) /* Half duplex */
++#define   MTK_PHY_LED_FORCE_ON			BIT(6)
++#define   MTK_PHY_LED_POLARITY			BIT(14)
++#define   MTK_PHY_LED_ENABLE			BIT(15)
++
++#define MTK_PHY_LED0_BLINK_CTRL			0x25
++#define MTK_PHY_LED1_BLINK_CTRL			0x27
++#define   MTK_PHY_LED_1000TX			BIT(0)
++#define   MTK_PHY_LED_1000RX			BIT(1)
++#define   MTK_PHY_LED_100TX			BIT(2)
++#define   MTK_PHY_LED_100RX			BIT(3)
++#define   MTK_PHY_LED_10TX			BIT(4)
++#define   MTK_PHY_LED_10RX			BIT(5)
++#define   MTK_PHY_LED_COLLISION			BIT(6)
++#define   MTK_PHY_LED_RX_CRC_ERR		BIT(7)
++#define   MTK_PHY_LED_RX_IDLE_ERR		BIT(8)
++#define   MTK_PHY_LED_FORCE_BLINK		BIT(9)
++
+ #define MTK_PHY_RG_BG_RASEL			0x115
+ #define   MTK_PHY_RG_BG_RASEL_MASK		GENMASK(2, 0)
+ 
++/* Register in boottrap syscon defining the initial state of the 4 PHY LEDs */
++#define RG_GPIO_MISC_TPBANK0			0x6f0
++#define   RG_GPIO_MISC_TPBANK0_BOOTMODE		GENMASK(11, 8)
++
+ /* These macro privides efuse parsing for internal phy. */
+ #define EFS_DA_TX_I2MPB_A(x)			(((x) >> 0) & GENMASK(5, 0))
+ #define EFS_DA_TX_I2MPB_B(x)			(((x) >> 6) & GENMASK(5, 0))
+@@ -238,13 +271,6 @@ enum {
+ 	PAIR_D,
+ };
+ 
+-enum {
+-	GPHY_PORT0,
+-	GPHY_PORT1,
+-	GPHY_PORT2,
+-	GPHY_PORT3,
+-};
+-
+ enum calibration_mode {
+ 	EFUSE_K,
+ 	SW_K
+@@ -263,6 +289,10 @@ enum CAL_MODE {
+ 	SW_M
+ };
+ 
++struct mtk_socphy_shared {
++	u32			boottrap;
++};
++
+ static int mtk_socphy_read_page(struct phy_device *phydev)
+ {
+ 	return __phy_read(phydev, MTK_EXT_PAGE_ACCESS);
+@@ -1073,6 +1103,104 @@ static int mt798x_phy_config_init(struct
+ 	return mt798x_phy_calibration(phydev);
+ }
+ 
++static int mt798x_phy_setup_led(struct phy_device *phydev, bool inverted)
++{
++	struct pinctrl *pinctrl;
++	const u16 led_on_ctrl_defaults = MTK_PHY_LED_ENABLE      |
++					 MTK_PHY_LED_ON_LINK1000 |
++					 MTK_PHY_LED_ON_LINK100  |
++					 MTK_PHY_LED_ON_LINK10;
++	const u16 led_blink_defaults = MTK_PHY_LED_1000TX |
++				       MTK_PHY_LED_1000RX |
++				       MTK_PHY_LED_100TX  |
++				       MTK_PHY_LED_100RX  |
++				       MTK_PHY_LED_10TX   |
++				       MTK_PHY_LED_10RX;
++
++	phy_write_mmd(phydev, MDIO_MMD_VEND2, MTK_PHY_LED0_ON_CTRL,
++		      led_on_ctrl_defaults ^
++		      (inverted ? MTK_PHY_LED_POLARITY : 0));
++
++	phy_write_mmd(phydev, MDIO_MMD_VEND2, MTK_PHY_LED1_ON_CTRL,
++		      led_on_ctrl_defaults);
++
++	phy_write_mmd(phydev, MDIO_MMD_VEND2, MTK_PHY_LED0_BLINK_CTRL,
++		      led_blink_defaults);
++
++	phy_write_mmd(phydev, MDIO_MMD_VEND2, MTK_PHY_LED1_BLINK_CTRL,
++		      led_blink_defaults);
++
++	pinctrl = devm_pinctrl_get_select(&phydev->mdio.dev, "gbe-led");
++	if (IS_ERR(pinctrl))
++		dev_err(&phydev->mdio.bus->dev, "Failed to setup PHY LED\n");
++
++	return 0;
++}
++
++static int mt7988_phy_probe_shared(struct phy_device *phydev)
++{
++	struct device_node *np = dev_of_node(&phydev->mdio.bus->dev);
++	struct mtk_socphy_shared *priv = phydev->shared->priv;
++	struct regmap *regmap;
++	u32 reg;
++	int ret;
++
++	/* The LED0 of the 4 PHYs in MT7988 are wired to SoC pins LED_A, LED_B,
++	 * LED_C and LED_D respectively. At the same time those pins are used to
++	 * bootstrap configuration of the reference clock source (LED_A),
++	 * DRAM DDRx16b x2/x1 (LED_B) and boot device (LED_C, LED_D).
++	 * In practise this is done using a LED and a resistor pulling the pin
++	 * either to GND or to VIO.
++	 * The detected value at boot time is accessible at run-time using the
++	 * TPBANK0 register located in the gpio base of the pinctrl, in order
++	 * to read it here it needs to be referenced by a phandle called
++	 * 'mediatek,pio' in the MDIO bus hosting the PHY.
++	 * The 4 bits in TPBANK0 are kept as package shared data and are used to
++	 * set LED polarity for each of the LED0.
++	 */
++	regmap = syscon_regmap_lookup_by_phandle(np, "mediatek,pio");
++	if (IS_ERR(regmap))
++		return PTR_ERR(regmap);
++
++	ret = regmap_read(regmap, RG_GPIO_MISC_TPBANK0, &reg);
++	if (ret)
++		return ret;
++
++	priv->boottrap = FIELD_GET(RG_GPIO_MISC_TPBANK0_BOOTMODE, reg);
++
++	return 0;
++}
++
++static bool mt7988_phy_get_boottrap_polarity(struct phy_device *phydev)
++{
++	struct mtk_socphy_shared *priv = phydev->shared->priv;
++
++	if (priv->boottrap & BIT(phydev->mdio.addr))
++		return false;
++
++	return true;
++}
++
++static int mt7988_phy_probe(struct phy_device *phydev)
++{
++	int err;
++
++	err = devm_phy_package_join(&phydev->mdio.dev, phydev, 0,
++				    sizeof(struct mtk_socphy_shared));
++	if (err)
++		return err;
++
++	if (phy_package_probe_once(phydev)) {
++		err = mt7988_phy_probe_shared(phydev);
++		if (err)
++			return err;
++	}
++
++	mt798x_phy_setup_led(phydev, mt7988_phy_get_boottrap_polarity(phydev));
++
++	return mt798x_phy_calibration(phydev);
++}
++
+ static struct phy_driver mtk_socphy_driver[] = {
+ 	{
+ 		PHY_ID_MATCH_EXACT(MTK_GPHY_ID_MT7981),
+@@ -1092,7 +1220,7 @@ static struct phy_driver mtk_socphy_driv
+ 		.config_init	= mt798x_phy_config_init,
+ 		.config_intr	= genphy_no_config_intr,
+ 		.handle_interrupt = genphy_handle_interrupt_no_ack,
+-		.probe		= mt798x_phy_calibration,
++		.probe		= mt7988_phy_probe,
+ 		.suspend	= genphy_suspend,
+ 		.resume		= genphy_resume,
+ 		.read_page	= mtk_socphy_read_page,

target/linux/mediatek/patches-5.15/732-net-phy-mxl-gpy-don-t-use-SGMII-AN-if-using-phylink.patch

@@ -0,0 +1,63 @@
+From a969b663c866129ed9eb217785a6574fbe826f1d Mon Sep 17 00:00:00 2001
+From: Daniel Golle <daniel@makrotopia.org>
+Date: Thu, 6 Apr 2023 23:36:50 +0100
+Subject: [PATCH] net: phy: mxl-gpy: don't use SGMII AN if using phylink
+
+MAC drivers using phylink expect SGMII in-band-status to be switched off
+when attached to a PHY. Make sure this is the case also for mxl-gpy which
+keeps SGMII in-band-status in case of SGMII interface mode is used.
+
+Signed-off-by: Daniel Golle <daniel@makrotopia.org>
+---
+ drivers/net/phy/mxl-gpy.c | 19 ++++++++++++++++---
+ 1 file changed, 16 insertions(+), 3 deletions(-)
+
+--- a/drivers/net/phy/mxl-gpy.c
++++ b/drivers/net/phy/mxl-gpy.c
+@@ -191,8 +191,11 @@ static bool gpy_2500basex_chk(struct phy
+ 
+ 	phydev->speed = SPEED_2500;
+ 	phydev->interface = PHY_INTERFACE_MODE_2500BASEX;
+-	phy_modify_mmd(phydev, MDIO_MMD_VEND1, VSPEC1_SGMII_CTRL,
+-		       VSPEC1_SGMII_CTRL_ANEN, 0);
++
++	if (!phydev->phylink)
++		phy_modify_mmd(phydev, MDIO_MMD_VEND1, VSPEC1_SGMII_CTRL,
++			       VSPEC1_SGMII_CTRL_ANEN, 0);
++
+ 	return true;
+ }
+ 
+@@ -216,6 +219,14 @@ static int gpy_config_aneg(struct phy_de
+ 	u32 adv;
+ 	int ret;
+ 
++	/* Disable SGMII auto-negotiation if using phylink */
++	if (phydev->phylink) {
++		ret = phy_modify_mmd(phydev, MDIO_MMD_VEND1, VSPEC1_SGMII_CTRL,
++				     VSPEC1_SGMII_CTRL_ANEN, 0);
++		if (ret < 0)
++			return ret;
++	}
++
+ 	if (phydev->autoneg == AUTONEG_DISABLE) {
+ 		/* Configure half duplex with genphy_setup_forced,
+ 		 * because genphy_c45_pma_setup_forced does not support.
+@@ -306,6 +317,8 @@ static void gpy_update_interface(struct
+ 	switch (phydev->speed) {
+ 	case SPEED_2500:
+ 		phydev->interface = PHY_INTERFACE_MODE_2500BASEX;
++		if (phydev->phylink)
++			break;
+ 		ret = phy_modify_mmd(phydev, MDIO_MMD_VEND1, VSPEC1_SGMII_CTRL,
+ 				     VSPEC1_SGMII_CTRL_ANEN, 0);
+ 		if (ret < 0)
+@@ -317,7 +330,7 @@ static void gpy_update_interface(struct
+ 	case SPEED_100:
+ 	case SPEED_10:
+ 		phydev->interface = PHY_INTERFACE_MODE_SGMII;
+-		if (gpy_sgmii_aneg_en(phydev))
++		if (phydev->phylink || gpy_sgmii_aneg_en(phydev))
+ 			break;
+ 		/* Enable and restart SGMII ANEG for 10/100/1000Mbps link speed
+ 		 * if ANEG is disabled (in 2500-BaseX mode).

target/linux/octeon/config-5.15

@@ -44,7 +44,6 @@ CONFIG_CPU_SUPPORTS_HIGHMEM=y
 CONFIG_CPU_SUPPORTS_HUGEPAGES=y
 CONFIG_CRAMFS=y
 CONFIG_CRC16=y
-CONFIG_CRYPTO_BLAKE2S=y
 CONFIG_CRYPTO_CRC32=y
 CONFIG_CRYPTO_CRC32C=y
 CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y

target/linux/sunxi/cortexa53/config-5.15

@@ -33,7 +33,6 @@ CONFIG_CRYPTO_AES_ARM64=y
 CONFIG_CRYPTO_AES_ARM64_CE=y
 CONFIG_CRYPTO_AES_ARM64_CE_BLK=y
 CONFIG_CRYPTO_AES_ARM64_CE_CCM=y
-CONFIG_CRYPTO_BLAKE2S=y
 CONFIG_CRYPTO_CRCT10DIF_ARM64_CE=y
 CONFIG_CRYPTO_CRYPTD=y
 CONFIG_CRYPTO_GHASH_ARM64_CE=y

target/linux/uml/config-5.15

@@ -20,7 +20,6 @@ CONFIG_CPU_SUP_HYGON=y
 CONFIG_CPU_SUP_INTEL=y
 CONFIG_CPU_SUP_ZHAOXIN=y
 CONFIG_CRC16=y
-CONFIG_CRYPTO_BLAKE2S=y
 CONFIG_CRYPTO_CRC32=y
 CONFIG_CRYPTO_CRC32C=y
 CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y

target/linux/x86/generic/config-5.15

@@ -61,7 +61,6 @@ CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y
 # CONFIG_CPU_IDLE_GOV_HALTPOLL is not set
 CONFIG_CPU_IDLE_GOV_MENU=y
 CONFIG_CPU_RMAP=y
-CONFIG_CRYPTO_BLAKE2S=y
 CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
 # CONFIG_CS89x0_ISA is not set
 # CONFIG_DEBUG_HOTPLUG_CPU0 is not set

target/linux/x86/geode/config-5.15

@@ -37,7 +37,6 @@ CONFIG_ALIX=y
 # CONFIG_AMD_PMC is not set
 CONFIG_ARCH_MIGHT_HAVE_ACPI_PDC=y
 # CONFIG_ATA_PIIX is not set
-CONFIG_CRYPTO_BLAKE2S=y
 CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
 CONFIG_CS5535_CLOCK_EVENT_SRC=y
 CONFIG_CS5535_MFGPT=y

target/linux/x86/legacy/config-5.15

@@ -45,7 +45,6 @@ CONFIG_BACKLIGHT_CLASS_DEVICE=y
 CONFIG_BLK_DEV_SR=y
 CONFIG_CDROM=y
 CONFIG_CPU_IDLE_GOV_MENU=y
-CONFIG_CRYPTO_BLAKE2S=y
 CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
 # CONFIG_CS89x0_ISA is not set
 CONFIG_DMA_ACPI=y