diff --git a/target/linux/mediatek/dts/mt7981b-keenetic-kn-3811.dts b/target/linux/mediatek/dts/mt7981b-keenetic-kn-3811.dts new file mode 100644 index 0000000000..87043ec907 --- /dev/null +++ b/target/linux/mediatek/dts/mt7981b-keenetic-kn-3811.dts @@ -0,0 +1,368 @@ +// SPDX-License-Identifier: GPL-2.0-only OR MIT + +/dts-v1/; + +#include "mt7981.dtsi" + +/ { + model = "Keenetic KN-3811"; + compatible = "keenetic,kn-3811", "mediatek,mt7981"; + + aliases { + label-mac-device = &gmac0; + led-boot = &power_led; + led-failsafe = &power_led; + led-running = &power_led; + led-upgrade = &power_led; + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + button-fn { + label = "fn"; + linux,code = ; + gpios = <&pio 5 GPIO_ACTIVE_LOW>; + }; + + button-reset { + label = "reset"; + linux,code = ; + gpios = <&pio 24 GPIO_ACTIVE_LOW>; + }; + + button-wps { + label = "wps"; + linux,code = ; + gpios = <&pio 29 GPIO_ACTIVE_LOW>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + /* fn led reassigned to wlan 2.4 */ + led-0 { + color = ; + function = LED_FUNCTION_WLAN_2GHZ; + gpios = <&pio 9 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy0tpt"; + }; + + power_led: led-1 { + color = ; + function = LED_FUNCTION_POWER; + gpios = <&pio 11 GPIO_ACTIVE_HIGH>; + }; + + led-2 { + color = ; + function = LED_FUNCTION_WAN; + gpios = <&pio 12 GPIO_ACTIVE_LOW>; + }; + + led-3 { + color = ; + function = LED_FUNCTION_WLAN_5GHZ; + gpios = <&pio 34 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy1tpt"; + }; + }; + + usb_vbus: regulator-usb-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpios = <&pio 6 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-boot-on; + }; + + virtual_flash { + compatible = "mtd-concat"; + devices = <&firmware1 &storage1 &firmware2 &storage2>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "kernel"; + reg = <0x0 0x600000>; + }; + + partition@400000 { + label = "ubi"; + reg = <0x600000 0x0>; + }; + }; + }; +}; + +&uart0 { + status = "okay"; +}; + +&watchdog { + status = "okay"; +}; + +ð { + status = "okay"; + + gmac0: mac@0 { + compatible = "mediatek,eth-mac"; + reg = <0>; + phy-mode = "2500base-x"; + + nvmem-cell-names = "mac-address"; + nvmem-cells = <&macaddr_factory_4 0>; + + fixed-link { + speed = <2500>; + full-duplex; + pause; + }; + }; + + gmac1: mac@1 { + compatible = "mediatek,eth-mac"; + reg = <1>; + phy-mode = "gmii"; + phy-handle = <&int_gbe_phy>; + label = "wan"; + + nvmem-cell-names = "mac-address"; + nvmem-cells = <&macaddr_factory_a 0>; + }; +}; + +&mdio_bus { + switch: switch@1f { + compatible = "mediatek,mt7531"; + reg = <0x1f>; + reset-gpios = <&pio 22 GPIO_ACTIVE_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&pio>; + interrupts = <38 IRQ_TYPE_LEVEL_HIGH>; + }; +}; + +&switch { + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "lan1"; + }; + + port@1 { + reg = <1>; + label = "lan2"; + }; + + port@2 { + reg = <2>; + label = "lan3"; + }; + + port@6 { + reg = <6>; + ethernet = <&gmac0>; + phy-mode = "2500base-x"; + + fixed-link { + speed = <2500>; + full-duplex; + pause; + }; + }; + }; +}; + +&pio { + spi0_flash_pins: spi0-pins { + mux { + function = "spi"; + groups = "spi0", "spi0_wp_hold"; + }; + + conf-pu { + pins = "SPI0_CS", "SPI0_HOLD", "SPI0_WP"; + drive-strength = ; + bias-pull-up = ; + }; + + conf-pd { + pins = "SPI0_CLK", "SPI0_MOSI", "SPI0_MISO"; + drive-strength = ; + bias-pull-down = ; + }; + }; +}; + +&spi0 { + pinctrl-names = "default"; + pinctrl-0 = <&spi0_flash_pins>; + status = "okay"; + + /* Winbond W25N02KV (256M) */ + spi_nand@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spi-nand"; + reg = <0>; + + spi-max-frequency = <52000000>; + spi-tx-buswidth = <4>; + spi-rx-buswidth = <4>; + + spi-cal-enable; + spi-cal-mode = "read-data"; + spi-cal-datalen = <7>; + spi-cal-data = /bits/ 8 <0x53 0x50 0x49 0x4e 0x41 0x4e 0x44>; + spi-cal-addrlen = <5>; + spi-cal-addr = /bits/ 32 <0x0 0x0 0x0 0x0 0x0>; + + mediatek,nmbm; + mediatek,bmt-max-ratio = <1>; + mediatek,bmt-max-reserved-blocks = <64>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + /* bl2 */ + partition@0 { + label = "preloader"; + reg = <0x0 0x80000>; + read-only; + }; + + /* fip */ + partition@80000 { + label = "u-boot"; + reg = <0x80000 0x200000>; + read-only; + }; + + partition@280000 { + label = "u-config"; + reg = <0x280000 0x80000>; + read-only; + }; + + partition@300000 { + label = "rf-eeprom"; + reg = <0x300000 0x200000>; + read-only; + + nvmem-layout { + compatible = "fixed-layout"; + #address-cells = <1>; + #size-cells = <1>; + + eeprom_factory_0: eeprom@0 { + reg = <0x0 0x1000>; + }; + + /* lan mac */ + macaddr_factory_4: macaddr@4 { + compatible = "mac-base"; + reg = <0x4 0x6>; + #nvmem-cell-cells = <1>; + }; + + /* wan mac */ + macaddr_factory_a: macaddr@a { + compatible = "mac-base"; + reg = <0xa 0x6>; + #nvmem-cell-cells = <1>; + }; + }; + }; + + firmware1: partition@500000 { + label = "firmware_1"; + reg = <0x500000 0x3a00000>; + }; + + partition@3f00000 { + label = "config_1"; + reg = <0x3f00000 0x80000>; + read-only; + }; + + partition@3f80000 { + label = "dump"; + reg = <0x3f80000 0x80000>; + read-only; + }; + + storage1: partition@4000000 { + label = "storage_a"; + reg = <0x4000000 0x3800000>; + }; + + partition@7800000 { + label = "u-state"; + reg = <0x7800000 0x20000>; + read-only; + }; + + partition@7a80000 { + label = "u-config_res"; + reg = <0x7a80000 0x80000>; + read-only; + }; + + partition@7b00000 { + label = "rf-eeprom_res"; + reg = <0x7b00000 0x200000>; + read-only; + }; + + firmware2: partition@7d00000 { + label = "firmware_2"; + reg = <0x7d00000 0x3a00000>; + }; + + partition@b700000 { + label = "config_2"; + reg = <0xb700000 0x80000>; + read-only; + }; + + storage2: partition@b780000 { + label = "storage_b"; + reg = <0xb780000 0x3880000>; + }; + }; + }; +}; + +&wifi { + nvmem-cell-names = "eeprom"; + nvmem-cells = <&eeprom_factory_0>; + status = "okay"; +}; + +&usb_phy { + status = "okay"; +}; + +&xhci { + status = "okay"; + vbus-supply = <&usb_vbus>; +}; diff --git a/target/linux/mediatek/filogic/base-files/etc/board.d/02_network b/target/linux/mediatek/filogic/base-files/etc/board.d/02_network index 7222040518..b976463cff 100644 --- a/target/linux/mediatek/filogic/base-files/etc/board.d/02_network +++ b/target/linux/mediatek/filogic/base-files/etc/board.d/02_network @@ -33,6 +33,7 @@ mediatek_setup_interfaces() confiabits,mt7981|\ cudy,wr3000-v1|\ jcg,q30-pro|\ + keenetic,kn-3811|\ qihoo,360t7|\ routerich,ax3000|\ routerich,ax3000-ubootmod) diff --git a/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac b/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac index a161fb5827..a9d06f9b84 100644 --- a/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac +++ b/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac @@ -112,6 +112,7 @@ case "$board" in jdcloud,re-cp-03) [ "$PHYNBR" = "1" ] && mmc_get_mac_binary factory 0xa > /sys${DEVPATH}/macaddress ;; + keenetic,kn-3811|\ keenetic,kn-3911) [ "$PHYNBR" = "1" ] && \ macaddr_setbit_la "$(mtd_get_mac_binary rf-eeprom 0x4)" > /sys${DEVPATH}/macaddress diff --git a/target/linux/mediatek/image/filogic.mk b/target/linux/mediatek/image/filogic.mk index f6d898fa60..e8a2888ee0 100644 --- a/target/linux/mediatek/image/filogic.mk +++ b/target/linux/mediatek/image/filogic.mk @@ -920,6 +920,26 @@ define Device/jdcloud_re-cp-03 endef TARGET_DEVICES += jdcloud_re-cp-03 +define Device/keenetic_kn-3811 + DEVICE_VENDOR := Keenetic + DEVICE_MODEL := KN-3811 + DEVICE_DTS := mt7981b-keenetic-kn-3811 + DEVICE_DTS_DIR := ../dts + DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware kmod-usb3 + UBINIZE_OPTS := -E 5 + BLOCKSIZE := 128k + PAGESIZE := 2048 + KERNEL_SIZE := 6144k + IMAGE_SIZE := 233984k + KERNEL := kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb | \ + append-squashfs4-fakeroot + IMAGES += factory.bin + IMAGE/factory.bin := append-kernel | pad-to $$(KERNEL_SIZE) | \ + append-ubi | check-size | zyimage -d 0x803811 -v "KN-3811" + IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata +endef +TARGET_DEVICES += keenetic_kn-3811 + define Device/keenetic_kn-3911 DEVICE_VENDOR := Keenetic DEVICE_MODEL := KN-3911