From ec231bf564f33ac7cac975e5f262b252fb2a89cc Mon Sep 17 00:00:00 2001 From: Michel Lespinasse Date: Thu, 16 Jan 2025 00:50:01 -0800 Subject: [PATCH] rockchip: show boot stages on nanopi R6 system LED Set up openwrt to show boot progress on the nanopi R6S or R6C system LED. The LED blinking states indicate the boot stage. The LED is defined as a power LED, but can still be set to heartbeat in /etc/config/system after the system is done booting. Signed-off-by: Michel Lespinasse Link: https://github.com/openwrt/openwrt/pull/17638 (cherry picked from commit de9ad11dac094b6074c9b23341acbc28806404ae) Link: https://github.com/openwrt/openwrt/pull/18347 Signed-off-by: Hauke Mehrtens --- ...1-nanopi-r6-show-boot-status-on-system-led | 33 +++++++++++++++++++ 1 file changed, 33 insertions(+) create mode 100644 target/linux/rockchip/patches-6.6/401-1-nanopi-r6-show-boot-status-on-system-led diff --git a/target/linux/rockchip/patches-6.6/401-1-nanopi-r6-show-boot-status-on-system-led b/target/linux/rockchip/patches-6.6/401-1-nanopi-r6-show-boot-status-on-system-led new file mode 100644 index 0000000000..f891cf5f16 --- /dev/null +++ b/target/linux/rockchip/patches-6.6/401-1-nanopi-r6-show-boot-status-on-system-led @@ -0,0 +1,33 @@ +Nanopi R6: show boot progress on the system LED + +Set up openwrt to show boot progress on the nanopi R6S or R6C system LED. + +The LED blinking states indicate the boot stage. The led is defined as +a power LED, but can still be set to heartbeat in /etc/config/system +after the system is done booting. + +--- a/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6.dtsi ++++ b/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6.dtsi +@@ -16,6 +16,10 @@ + ethernet0 = &gmac1; + mmc0 = &sdmmc; + mmc1 = &sdhci; ++ led-boot = &sys_led; ++ led-failsafe = &sys_led; ++ led-running = &sys_led; ++ led-upgrade = &sys_led; + }; + + chosen { +@@ -54,9 +58,9 @@ + + sys_led: led-0 { + color = ; +- function = LED_FUNCTION_HEARTBEAT; ++ function = LED_FUNCTION_POWER; + gpios = <&gpio1 RK_PC1 GPIO_ACTIVE_HIGH>; +- linux,default-trigger = "heartbeat"; ++ default-state = "on"; + pinctrl-names = "default"; + pinctrl-0 = <&sys_led_pin>; + };