Nanako/immortalwrt
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

mediatek: filogic: add support for Huasifei WH3000

Browse Source 
The Huasifei WH3000 eMMC model (aka Fudy MT3000) is a Wi-Fi 6 5G
cellular router based on MediaTek MT7981A SoC.

Specifications:
SoC: Filogic 820 MT7981A (1.3GHz)
RAM: DDR4 1GB
Flash: eMMC 8G
WiFi: 2.4GHz and 5GHz with 3 antennas
Ethernet:
1x WAN (10/100/1000M)
1x LAN (10/100/1000/2500M)
USB: 1x USB 3.0 port
UART: 3.3V, TX, RX, GND / 115200 8N1

Installation via U-Boot rescue:
Connect to the GbE eth port, then press and hold reset button while
booting the device. Wait for the Internet led to blink 5 times,
release reset button. The rescue page is accessible via http://192.168.1.1
Select the OpenWrt sysupgrade image and start upgrade.
Wait for the router to flash new firmware and reboot.
This commit is contained in:
coolsnowwolf 2025-01-13 16:00:05 +08:00 committed by Tianling Shen
parent dbd20310a8
commit f310b8c74e
No known key found for this signature in database
GPG Key ID: 6850B6345C862176
6 changed files with 226 additions and 4 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

5
package/boot/uboot-envtools/files/mediatek_filogic
View File

@ -62,6 +62,7 @@ glinet,gl-mt2500|\
glinet,gl-mt6000|\
glinet,gl-x3000|\
glinet,gl-xe3000|\
huasifei,wh3000-emmc|\
nradio,c8-668gl)
local envdev=$(find_mmc_part "u-boot-env")
ubootenv_add_uci_config "$envdev" "0x0" "0x80000"
@ -94,6 +95,7 @@ konka,komi-a31)
cetron,ct3003|\
edgecore,eap111|\
h3c,magic-nx30-pro-nmbm|\
livinet,zr-3020|\
netgear,wax220|\
zbtlink,zbt-z8102ax|\
zbtlink,zbt-z8103ax)
@ -112,9 +114,6 @@ gatonetworks,gdsp)
glinet,gl-mt3000)
ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x80000" "0x20000"
;;
livinet,zr-3020)
ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x20000" "0x20000" "1"
;;
mercusys,mr90x-v1|\
routerich,ax3000|\
tenbay,wr3000k|\

199
target/linux/mediatek/dts/mt7981b-huasifei-wh3000-emmc.dts Normal file
View File

@ -0,0 +1,199 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
#include "mt7981.dtsi"
/ {
model = "Huasifei WH3000 eMMC version";
compatible = "huasifei,wh3000-emmc", "mediatek,mt7981";
aliases {
serial0 = &uart0;
led-boot = &wlan_led;
led-failsafe = &wlan_led;
led-upgrade = &wlan_led;
};
chosen {
bootargs = "root=PARTLABEL=rootfs rootwait rootfstype=squashfs,f2fs";
stdout-path = "serial0:115200n8";
};
memory@40000000 {
reg = <0 0x40000000 0 0x40000000>;
};
gpio-keys {
compatible = "gpio-keys";
button-mode {
label = "mode";
linux,code = <BTN_0>;
linux,input-type = <EV_SW>;
gpios = <&pio 0 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
button-reset {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&pio 1 GPIO_ACTIVE_LOW>;
};
};
gpio-leds {
compatible = "gpio-leds";
wan_led: led-0 {
function = LED_FUNCTION_WAN;
color = <LED_COLOR_ID_RED>;
gpios = <&pio 11 GPIO_ACTIVE_LOW>;
};
wlan_led: led-1 {
function = LED_FUNCTION_WLAN;
color = <LED_COLOR_ID_WHITE>;
gpios = <&pio 10 GPIO_ACTIVE_LOW>;
};
};
usb_vbus: regulator-usb {
compatible = "regulator-fixed";
regulator-name = "usb-vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpios = <&pio 9 GPIO_ACTIVE_LOW>;
regulator-boot-on;
};
};
&eth {
pinctrl-names = "default";
pinctrl-0 = <&mdio_pins>;
status = "okay";
gmac0: mac@0 {
compatible = "mediatek,eth-mac";
reg = <0>;
nvmem-cells = <&macaddr_factory_4 2>;
nvmem-cell-names = "mac-address";
phy-mode = "2500base-x";
phy-handle = <&phy1>;
};
gmac1: mac@1 {
compatible = "mediatek,eth-mac";
reg = <1>;
nvmem-cells = <&macaddr_factory_4 3>;
nvmem-cell-names = "mac-address";
phy-mode = "gmii";
phy-handle = <&int_gbe_phy>;
};
};
&mdio_bus {
phy1: ethernet-phy@1 {
compatible = "ethernet-phy-ieee802.3-c45";
reg = <1>;
interrupts = <38 IRQ_TYPE_LEVEL_LOW>;
interrupt-parent = <&pio>;
reset-assert-us = <100000>;
reset-deassert-us = <100000>;
reset-gpios = <&pio 39 GPIO_ACTIVE_LOW>;
realtek,aldps-enable;
};
};
&mmc0 {
bus-width = <8>;
cap-mmc-highspeed;
max-frequency = <52000000>;
no-sd;
no-sdio;
non-removable;
pinctrl-names = "default", "state_uhs";
pinctrl-0 = <&mmc0_pins_default>;
pinctrl-1 = <&mmc0_pins_uhs>;
vmmc-supply = <&reg_3p3v>;
status = "okay";
card@0 {
compatible = "mmc-card";
reg = <0>;
block {
compatible = "block-device";
partitions {
block-partition-factory {
partname = "factory";
nvmem-layout {
compatible = "fixed-layout";
#address-cells = <1>;
#size-cells = <1>;
eeprom_factory_0: eeprom@0 {
reg = <0x0 0x1000>;
};
macaddr_factory_4: macaddr@4 {
compatible = "mac-base";
reg = <0x4 0x6>;
#nvmem-cell-cells = <1>;
};
};
};
};
};
};
};
&pio {
mmc0_pins_default: mmc0-pins-default {
mux {
function = "flash";
groups = "emmc_45";
};
};
mmc0_pins_uhs: mmc0-pins-uhs {
mux {
function = "flash";
groups = "emmc_45";
};
};
};
&uart0 {
status = "okay";
};
&watchdog {
status = "okay";
};
&wifi {
nvmem-cells = <&eeprom_factory_0>;
nvmem-cell-names = "eeprom";
status = "okay";
band@1 {
reg = <1>;
nvmem-cells = <&macaddr_factory_4 1>;
nvmem-cell-names = "mac-address";
};
};
&usb_phy {
status = "okay";
};
&xhci {
status = "okay";
vbus-supply = <&usb_vbus>;
};

4
target/linux/mediatek/filogic/base-files/etc/board.d/01_leds
View File

@ -49,6 +49,10 @@ glinet,gl-xe3000)
ucidef_set_led_netdev "wlan2g" "WLAN2G" "green:wifi2g" "phy0-ap0"
ucidef_set_led_netdev "wlan5g" "WLAN5G" "green:wifi5g" "phy1-ap0"
;;
huasifei,wh3000-emmc)
ucidef_set_led_netdev "wan" "WAN" "red:wan" "eth1"
ucidef_set_led_netdev "wlan" "WLAN" "white:wlan" "phy1-ap0"
;;
imou,lc-hx3001|\
nokia,ea0326gmp)
ucidef_set_led_netdev "wan" "WAN" "green:wan" "eth1" "link"

3
target/linux/mediatek/filogic/base-files/etc/board.d/02_network
View File

@ -70,7 +70,8 @@ mediatek_setup_interfaces()
ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4 sfp2" "sfp1 wan"
;;
bananapi,bpi-r3-mini|\
edgecore,eap111)
edgecore,eap111|\
huasifei,wh3000-emmc)
ucidef_set_interfaces_lan_wan eth0 eth1
;;
bananapi,bpi-r4)

2
target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh
View File

@ -105,6 +105,7 @@ platform_do_upgrade() {
glinet,gl-mt6000|\
glinet,gl-x3000|\
glinet,gl-xe3000|\
huasifei,wh3000-emmc|\
smartrg,sdg-8612|\
smartrg,sdg-8614|\
smartrg,sdg-8622|\
@ -229,6 +230,7 @@ platform_copy_config() {
glinet,gl-mt6000|\
glinet,gl-x3000|\
glinet,gl-xe3000|\
huasifei,wh3000-emmc|\
jdcloud,re-cp-03|\
nradio,c8-668gl|\
smartrg,sdg-8612|\

17
target/linux/mediatek/image/filogic.mk
View File

@ -954,6 +954,23 @@ define Device/h3c_magic-nx30-pro-nmbm
endef
TARGET_DEVICES += h3c_magic-nx30-pro-nmbm
define Device/huasifei_wh3000-emmc
DEVICE_VENDOR := Huasifei
DEVICE_MODEL := WH3000 eMMC
DEVICE_ALT0_VENDOR := Fudy
DEVICE_ALT0_MODEL := MT3000
DEVICE_DTS := mt7981b-huasifei-wh3000-emmc
DEVICE_DTS_DIR := ../dts
DEVICE_PACKAGES := kmod-mt7981-firmware mt7981-wo-firmware f2fsck mkf2fs \
kmod-usb-net-cdc-mbim kmod-usb-net-qmi-wwan kmod-usb-serial-option \
kmod-usb3 automount uqmi
KERNEL := kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
KERNEL_INITRAMFS := kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
endef
TARGET_DEVICES += huasifei_wh3000-emmc
define Device/imou_lc-hx3001
DEVICE_VENDOR := Imou
DEVICE_MODEL := LC-HX3001