2b1847c781
Adds latest 6.6 patches from the Raspberry Pi repository. These patches were generated from: https://github.com/raspberrypi/linux/commits/rpi-6.6.y/ With the following command: git format-patch -N v6.6.85..HEAD (HEAD -> bba53a117a4a5c29da892962332ff1605990e17a) Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> (cherry picked from commit 4618d09587c4e3d5fdc7643494474be602710815)
34 lines
1.3 KiB
Diff
34 lines
1.3 KiB
Diff
From bba53a117a4a5c29da892962332ff1605990e17a Mon Sep 17 00:00:00 2001
|
|
From: Phil Elwell <phil@raspberrypi.com>
|
|
Date: Wed, 26 Mar 2025 11:28:28 +0000
|
|
Subject: [PATCH] dts: rp1: Don't use DMA with UARTs
|
|
|
|
DMA has been enabled on RP1's UART0, but with mixed success. Transmits
|
|
seem to work, but the DMA interface is not well suited to receiving
|
|
arbitrary amounts of data. In particular, the PL011 driver is slow to
|
|
pass on the received data, batching it into large blocks.
|
|
|
|
On balance, it's better to just disable the DMA support. As with the
|
|
other UARTs, the required runes are left in the DTS as comments.
|
|
|
|
Signed-off-by: Phil Elwell <phil@raspberrypi.com>
|
|
---
|
|
arch/arm64/boot/dts/broadcom/rp1.dtsi | 6 +++---
|
|
1 file changed, 3 insertions(+), 3 deletions(-)
|
|
|
|
--- a/arch/arm64/boot/dts/broadcom/rp1.dtsi
|
|
+++ b/arch/arm64/boot/dts/broadcom/rp1.dtsi
|
|
@@ -65,9 +65,9 @@
|
|
interrupts = <RP1_INT_UART0 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&rp1_clocks RP1_CLK_UART &rp1_clocks RP1_PLL_SYS_PRI_PH>;
|
|
clock-names = "uartclk", "apb_pclk";
|
|
- dmas = <&rp1_dma RP1_DMA_UART0_TX>,
|
|
- <&rp1_dma RP1_DMA_UART0_RX>;
|
|
- dma-names = "tx", "rx";
|
|
+ // dmas = <&rp1_dma RP1_DMA_UART0_TX>,
|
|
+ // <&rp1_dma RP1_DMA_UART0_RX>;
|
|
+ // dma-names = "tx", "rx";
|
|
pinctrl-names = "default";
|
|
arm,primecell-periphid = <0x00341011>;
|
|
uart-has-rtscts;
|