5872633b9d
Adds latest 6.6 patches from the Raspberry Pi repository. These patches were generated from: https://github.com/raspberrypi/linux/commits/rpi-6.6.y/ With the following command: git format-patch -N v6.6.83..HEAD (HEAD -> 08d4e8f52256bd422d8a1f876411603f627d0a82) Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> (cherry picked from commit 251f76c1c67d62c585d799c38dab31e1385d2ad5)
215 lines
6.0 KiB
Diff
215 lines
6.0 KiB
Diff
From 384e58f63a3a328f7f656052b6357f3408aac6c3 Mon Sep 17 00:00:00 2001
|
|
From: Dave Stevenson <dave.stevenson@raspberrypi.com>
|
|
Date: Tue, 31 Dec 2024 20:33:46 +0000
|
|
Subject: [PATCH] dtoverlays: Add overlay for Sony IMX415 image sensor
|
|
|
|
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
|
|
---
|
|
arch/arm/boot/dts/overlays/Makefile | 1 +
|
|
arch/arm/boot/dts/overlays/README | 31 +++++
|
|
arch/arm/boot/dts/overlays/imx415-overlay.dts | 116 ++++++++++++++++++
|
|
arch/arm/boot/dts/overlays/imx415.dtsi | 27 ++++
|
|
4 files changed, 175 insertions(+)
|
|
create mode 100644 arch/arm/boot/dts/overlays/imx415-overlay.dts
|
|
create mode 100644 arch/arm/boot/dts/overlays/imx415.dtsi
|
|
|
|
--- a/arch/arm/boot/dts/overlays/Makefile
|
|
+++ b/arch/arm/boot/dts/overlays/Makefile
|
|
@@ -135,6 +135,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \
|
|
imx296.dtbo \
|
|
imx327.dtbo \
|
|
imx378.dtbo \
|
|
+ imx415.dtbo \
|
|
imx462.dtbo \
|
|
imx477.dtbo \
|
|
imx500.dtbo \
|
|
--- a/arch/arm/boot/dts/overlays/README
|
|
+++ b/arch/arm/boot/dts/overlays/README
|
|
@@ -2859,6 +2859,37 @@ Params: rotation Mounting
|
|
450000000 (default), 453000000, 456000000.
|
|
|
|
|
|
+Name: imx415
|
|
+Info: Sony IMX415 camera module.
|
|
+ Uses Unicam 1, which is the standard camera connector on most Pi
|
|
+ variants. By default this uses 4 CSI2 data lanes, so requires a
|
|
+ Compute Module or Pi5.
|
|
+Load: dtoverlay=imx415,<param>
|
|
+Params: addr Set I2C address of sensor. Valid values are
|
|
+ 0x10, 0x1a, 0x36 and 0x37. Default is 0x37.
|
|
+ 4lane Enable 4 CSI2 data lanes.
|
|
+ clock-frequency Sets the clock frequency to match that used on
|
|
+ the board.
|
|
+ Valid values are 24, 27, 37.125, 72, or
|
|
+ 74.25MHz.
|
|
+ The default is 24MHz.
|
|
+ Note that the link frequencies permitted vary
|
|
+ based on the oscillator used.
|
|
+ link-frequency Confgures the link frequency to be used. Note
|
|
+ that the permitted values vary based on
|
|
+ clock-frequency and number of lanes.
|
|
+ The default is 360MHz for 720Mbit/s.
|
|
+ orientation Sensor orientation (0 = front, 1 = rear,
|
|
+ 2 = external, default external)
|
|
+ rotation Mounting rotation of the camera sensor (0 or
|
|
+ 180, default 0)
|
|
+ media-controller Configure use of Media Controller API for
|
|
+ configuring the sensor (default on)
|
|
+ cam0 Adopt the default configuration for CAM0 on a
|
|
+ Compute Module (CSI0, i2c_vc, and cam0_reg).
|
|
+ vcm Enable ad5398 VCM associated with the sensor.
|
|
+
|
|
+
|
|
Name: imx462
|
|
Info: Sony IMX462 camera module.
|
|
Uses Unicam 1, which is the standard camera connector on most Pi
|
|
--- /dev/null
|
|
+++ b/arch/arm/boot/dts/overlays/imx415-overlay.dts
|
|
@@ -0,0 +1,116 @@
|
|
+// SPDX-License-Identifier: GPL-2.0-only
|
|
+// Definitions for IMX415 camera module on VC I2C bus
|
|
+/dts-v1/;
|
|
+/plugin/;
|
|
+
|
|
+#include <dt-bindings/gpio/gpio.h>
|
|
+
|
|
+/{
|
|
+ compatible = "brcm,bcm2835";
|
|
+
|
|
+ fragment@0 {
|
|
+ target = <&i2c0if>;
|
|
+ __overlay__ {
|
|
+ status = "okay";
|
|
+ };
|
|
+ };
|
|
+
|
|
+ clk_frag: fragment@1 {
|
|
+ target = <&cam1_clk>;
|
|
+ cam_clk: __overlay__ {
|
|
+ status = "okay";
|
|
+ clock-frequency = <24000000>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ fragment@2 {
|
|
+ target = <&i2c0mux>;
|
|
+ __overlay__ {
|
|
+ status = "okay";
|
|
+ };
|
|
+ };
|
|
+
|
|
+ reg_frag: fragment@3 {
|
|
+ target = <&cam1_reg>;
|
|
+ cam_reg: __overlay__ {
|
|
+ startup-delay-us = <100000>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ i2c_frag: fragment@100 {
|
|
+ target = <&i2c_csi_dsi>;
|
|
+ __overlay__ {
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+ status = "okay";
|
|
+
|
|
+ #include "imx415.dtsi"
|
|
+
|
|
+ vcm: ad5398@c {
|
|
+ compatible = "adi,ad5398";
|
|
+ reg = <0x0c>;
|
|
+ status = "disabled";
|
|
+ VANA-supply = <&cam1_reg>;
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+
|
|
+ csi_frag: fragment@101 {
|
|
+ target = <&csi1>;
|
|
+ csi: __overlay__ {
|
|
+ status = "okay";
|
|
+ brcm,media-controller;
|
|
+
|
|
+ port {
|
|
+ csi_ep: endpoint {
|
|
+ remote-endpoint = <&cam_endpoint>;
|
|
+ clock-lanes = <0>;
|
|
+ data-lanes = <1 2>;
|
|
+ clock-noncontinuous;
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+
|
|
+ fragment@201 {
|
|
+ target = <&cam_endpoint>;
|
|
+ __dormant__ {
|
|
+ data-lanes = <1 2 3 4>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ fragment@202 {
|
|
+ target = <&csi_ep>;
|
|
+ __dormant__ {
|
|
+ data-lanes = <1 2 3 4>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+
|
|
+ __overrides__ {
|
|
+ addr = <&cam_node>, "reg:0";
|
|
+ rotation = <&cam_node>,"rotation:0";
|
|
+ orientation = <&cam_node>,"orientation:0";
|
|
+ media-controller = <&csi>,"brcm,media-controller?";
|
|
+ cam0 = <&i2c_frag>, "target:0=",<&i2c_csi_dsi0>,
|
|
+ <&csi_frag>, "target:0=",<&csi0>,
|
|
+ <®_frag>, "target:0=",<&cam0_reg>,
|
|
+ <&clk_frag>, "target:0=",<&cam0_clk>,
|
|
+ <&cam_node>, "clocks:0=",<&cam0_clk>,
|
|
+ <&cam_node>, "avdd-supply:0=",<&cam0_reg>,
|
|
+ <&vcm>, "VANA-supply:0=", <&cam0_reg>;
|
|
+ vcm = <&vcm>, "status=okay",
|
|
+ <&cam_node>,"lens-focus:0=", <&vcm>;
|
|
+ clock-frequency = <&cam_clk>, "clock-frequency:0";
|
|
+ link-frequency = <&cam_endpoint>,"link-frequencies#0";
|
|
+ 4lane = <0>, "+201+202";
|
|
+ };
|
|
+};
|
|
+
|
|
+&cam_node {
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&cam_endpoint {
|
|
+ remote-endpoint = <&csi_ep>;
|
|
+};
|
|
--- /dev/null
|
|
+++ b/arch/arm/boot/dts/overlays/imx415.dtsi
|
|
@@ -0,0 +1,27 @@
|
|
+// Fragment that configures an imx415
|
|
+
|
|
+cam_node: imx415@37 {
|
|
+ compatible = "sony,imx415";
|
|
+ reg = <0x37>;
|
|
+ status = "disabled";
|
|
+
|
|
+ clocks = <&cam1_clk>;
|
|
+ clock-names = "inck";
|
|
+
|
|
+ avdd-supply = <&cam1_reg>; /* 2.8v */
|
|
+ dvdd-supply = <&cam_dummy_reg>; /* 1.8v */
|
|
+ ovdd-supply = <&cam_dummy_reg>; /* 1.2v */
|
|
+
|
|
+ rotation = <180>;
|
|
+ orientation = <2>;
|
|
+
|
|
+ port {
|
|
+ cam_endpoint: endpoint {
|
|
+ clock-lanes = <0>;
|
|
+ data-lanes = <1 2>;
|
|
+ //clock-noncontinuous;
|
|
+ link-frequencies =
|
|
+ /bits/ 64 <360000000>;
|
|
+ };
|
|
+ };
|
|
+};
|