4779b731d4
Manually refreshed: 010-mesh-Allow-DFS-channels-to-be-selected-if-dfs-is-ena.patch 110-mbedtls-TLS-crypto-option-initial-port.patch 140-tests-Makefile-make-run-tests-with-CONFIG_TLS.patch 301-mesh-noscan.patch 601-ucode_support.patch 780-Implement-APuP-Access-Point-Micro-Peering.patch Dropped upstreamed: 330-nl80211_fix_set_freq.patch 804-hostapd-Fix-clearing-up-settings-for-color-switch.patch Automatically rebased all other patches. Tested-by: Rany Hany <rany_hany@riseup.net> # ramips_mt7621/asus_rt-ax53u, mt7622/xiaomi_redmi-router-ax6s Tested-by: Andre Heider <a.heider@gmail.com> # filogic/openwrt_one, ramips_mt7621/netgear_wac124 Tested-by: Agustin Lorenzo <agustin.lorenzo@thinco.es> # qualcommax/ipq807x (AX3600) Tested-by: Daniel Pawlik <pawlik.dan@gmail.com> # BPi-R4 with mt7996 Signed-off-by: Rany Hany <rany_hany@riseup.net>
86 lines
2.8 KiB
Diff
86 lines
2.8 KiB
Diff
From: Daniel Golle <daniel@makrotopia.org>
|
|
Date: Fri, 20 Apr 2018 07:41:03 +0200
|
|
Subject: [PATCH] Allow HT40 also on 2.4GHz if noscan option is set, which also
|
|
skips secondary channel scan just like noscan works in AP mode.
|
|
|
|
--- a/wpa_supplicant/config.c
|
|
+++ b/wpa_supplicant/config.c
|
|
@@ -2668,6 +2668,7 @@ static const struct parse_data ssid_fiel
|
|
#else /* CONFIG_MESH */
|
|
{ INT_RANGE(mode, 0, 4) },
|
|
#endif /* CONFIG_MESH */
|
|
+ { INT_RANGE(noscan, 0, 1) },
|
|
{ INT_RANGE(proactive_key_caching, 0, 1) },
|
|
{ INT_RANGE(disabled, 0, 2) },
|
|
{ STR(id_str) },
|
|
--- a/wpa_supplicant/config_file.c
|
|
+++ b/wpa_supplicant/config_file.c
|
|
@@ -867,6 +867,7 @@ static void wpa_config_write_network(FIL
|
|
#endif /* IEEE8021X_EAPOL */
|
|
INT(mode);
|
|
INT(no_auto_peer);
|
|
+ INT(noscan);
|
|
INT_DEF(mesh_fwding, DEFAULT_MESH_FWDING);
|
|
INT(frequency);
|
|
INT(enable_edmg);
|
|
--- a/wpa_supplicant/config_ssid.h
|
|
+++ b/wpa_supplicant/config_ssid.h
|
|
@@ -1063,6 +1063,8 @@ struct wpa_ssid {
|
|
*/
|
|
int no_auto_peer;
|
|
|
|
+ int noscan;
|
|
+
|
|
/**
|
|
* mesh_rssi_threshold - Set mesh parameter mesh_rssi_threshold (dBm)
|
|
*
|
|
--- a/wpa_supplicant/mesh.c
|
|
+++ b/wpa_supplicant/mesh.c
|
|
@@ -509,6 +509,8 @@ static int wpa_supplicant_mesh_init(stru
|
|
frequency);
|
|
goto out_free;
|
|
}
|
|
+ if (conf->noscan)
|
|
+ ssid->noscan = 1;
|
|
|
|
if (ssid->mesh_basic_rates == NULL) {
|
|
/*
|
|
--- a/wpa_supplicant/wpa_supplicant.c
|
|
+++ b/wpa_supplicant/wpa_supplicant.c
|
|
@@ -3044,7 +3044,7 @@ static bool ibss_mesh_can_use_vht(struct
|
|
const struct wpa_ssid *ssid,
|
|
struct hostapd_hw_modes *mode)
|
|
{
|
|
- if (mode->mode != HOSTAPD_MODE_IEEE80211A)
|
|
+ if (mode->mode != HOSTAPD_MODE_IEEE80211A && !(ssid->noscan))
|
|
return false;
|
|
|
|
if (!drv_supports_vht(wpa_s, ssid))
|
|
@@ -3117,7 +3117,7 @@ static void ibss_mesh_select_40mhz(struc
|
|
int i, res;
|
|
unsigned int j;
|
|
static const int ht40plus[] = {
|
|
- 36, 44, 52, 60, 100, 108, 116, 124, 132, 140,
|
|
+ 1, 2, 3, 4, 5, 6, 7, 36, 44, 52, 60, 100, 108, 116, 124, 132, 140,
|
|
149, 157, 165, 173, 184, 192
|
|
};
|
|
int ht40 = -1;
|
|
@@ -3414,7 +3414,7 @@ void ibss_mesh_setup_freq(struct wpa_sup
|
|
int ieee80211_mode = wpas_mode_to_ieee80211_mode(ssid->mode);
|
|
enum hostapd_hw_mode hw_mode;
|
|
struct hostapd_hw_modes *mode = NULL;
|
|
- int obss_scan = 1;
|
|
+ int obss_scan = !(ssid->noscan);
|
|
u8 channel;
|
|
bool is_6ghz, is_24ghz;
|
|
bool dfs_enabled = wpa_s->conf->country[0] && (wpa_s->drv_flags & WPA_DRIVER_FLAGS_RADAR);
|
|
@@ -3458,6 +3458,8 @@ void ibss_mesh_setup_freq(struct wpa_sup
|
|
freq->he_enabled = ibss_mesh_can_use_he(wpa_s, ssid, mode,
|
|
ieee80211_mode);
|
|
freq->channel = channel;
|
|
+ if (mode->mode == HOSTAPD_MODE_IEEE80211G && ssid->noscan)
|
|
+ ibss_mesh_select_40mhz(wpa_s, ssid, mode, freq, obss_scan, dfs_enabled);
|
|
/* Setup higher BW only for 5 GHz */
|
|
if (mode->mode == HOSTAPD_MODE_IEEE80211A) {
|
|
ibss_mesh_select_40mhz(wpa_s, ssid, mode, freq, obss_scan, dfs_enabled);
|