immortalwrt/target/linux/imx/patches-6.6/600-PCI-imx6-Start-link-at-max-gen-first-for-IMX8MM-and-IMX8MP.patch

From cf983e4a04eecb5be93af7b53cb10805ee448998 Mon Sep 17 00:00:00 2001
From: Tim Harvey <tharvey@gateworks.com>
Date: Mon, 21 Aug 2023 09:20:17 -0700
Subject: [PATCH] PCI: imx6: Start link at max gen first for IMX8MM and IMX8MP

commit fa33a6d87eac ("PCI: imx6: Start link in Gen1 before negotiating
for Gen2 mode") started link negotiation at Gen1 before attempting
faster speeds in order to work around an issue with a particular switch
on an IMX6Q SoC.

This behavior is not the norm for PCI link negotiation and it has been
found to cause issues in other cases:
- IMX8MM with PI7C9X2G608GP switch: various endpoints (such as qca988x)
  will fail to link more than 50% of the time
- IMX8MP with PI7C9X2G608GP switch: occasionally will fail to link with
  switch and cause a CPU hang about 30% of the time

Disable this behavior for IMX8MM and IMX8MP.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
---
 drivers/pci/controller/dwc/pci-imx6.c | 53 ++++++++++++++-------------
 1 file changed, 27 insertions(+), 26 deletions(-)

--- a/drivers/pci/controller/dwc/pci-imx6.c
+++ b/drivers/pci/controller/dwc/pci-imx6.c
@@ -60,6 +60,7 @@ enum imx6_pcie_variants {
 #define IMX6_PCIE_FLAG_IMX6_PHY			BIT(0)
 #define IMX6_PCIE_FLAG_IMX6_SPEED_CHANGE	BIT(1)
 #define IMX6_PCIE_FLAG_SUPPORTS_SUSPEND		BIT(2)
+#define IMX6_PCIE_FLAG_GEN1_LAST		BIT(3)
 
 #define IMX6_PCIE_MAX_CLKS       6
 
@@ -836,26 +837,28 @@ static int imx6_pcie_start_link(struct d
 	u32 tmp;
 	int ret;
 
-	/*
-	 * Force Gen1 operation when starting the link.  In case the link is
-	 * started in Gen2 mode, there is a possibility the devices on the
-	 * bus will not be detected at all.  This happens with PCIe switches.
-	 */
-	dw_pcie_dbi_ro_wr_en(pci);
-	tmp = dw_pcie_readl_dbi(pci, offset + PCI_EXP_LNKCAP);
-	tmp &= ~PCI_EXP_LNKCAP_SLS;
-	tmp |= PCI_EXP_LNKCAP_SLS_2_5GB;
-	dw_pcie_writel_dbi(pci, offset + PCI_EXP_LNKCAP, tmp);
-	dw_pcie_dbi_ro_wr_dis(pci);
+	if (!(imx6_pcie->drvdata->flags & IMX6_PCIE_FLAG_GEN1_LAST)) {
+		/*
+		 * Force Gen1 operation when starting the link.  In case the link is
+		 * started in Gen2 mode, there is a possibility the devices on the
+		 * bus will not be detected at all.  This happens with PCIe switches.
+		 */
+		dw_pcie_dbi_ro_wr_en(pci);
+		tmp = dw_pcie_readl_dbi(pci, offset + PCI_EXP_LNKCAP);
+		tmp &= ~PCI_EXP_LNKCAP_SLS;
+		tmp |= PCI_EXP_LNKCAP_SLS_2_5GB;
+		dw_pcie_writel_dbi(pci, offset + PCI_EXP_LNKCAP, tmp);
+		dw_pcie_dbi_ro_wr_dis(pci);
+	}
 
 	/* Start LTSSM. */
 	imx6_pcie_ltssm_enable(dev);
 
-	ret = dw_pcie_wait_for_link(pci);
-	if (ret)
-		goto err_reset_phy;
+	if ((pci->link_gen > 1) && !(imx6_pcie->drvdata->flags & IMX6_PCIE_FLAG_GEN1_LAST)) {
+		ret = dw_pcie_wait_for_link(pci);
+		if (ret)
+			goto err_reset_phy;
 
-	if (pci->link_gen > 1) {
 		/* Allow faster modes after the link is up */
 		dw_pcie_dbi_ro_wr_en(pci);
 		tmp = dw_pcie_readl_dbi(pci, offset + PCI_EXP_LNKCAP);
@@ -889,18 +892,14 @@ static int imx6_pcie_start_link(struct d
 				goto err_reset_phy;
 			}
 		}
-
-		/* Make sure link training is finished as well! */
-		ret = dw_pcie_wait_for_link(pci);
-		if (ret)
-			goto err_reset_phy;
-	} else {
-		dev_info(dev, "Link: Only Gen1 is enabled\n");
 	}
 
+	ret = dw_pcie_wait_for_link(pci);
+	if (ret)
+		goto err_reset_phy;
+
 	imx6_pcie->link_is_up = true;
-	tmp = dw_pcie_readw_dbi(pci, offset + PCI_EXP_LNKSTA);
-	dev_info(dev, "Link up, Gen%i\n", tmp & PCI_EXP_LNKSTA_CLS);
+
 	return 0;
 
 err_reset_phy:
@@ -1456,14 +1455,16 @@ static const struct imx6_pcie_drvdata dr
 	},
 	[IMX8MM] = {
 		.variant = IMX8MM,
-		.flags = IMX6_PCIE_FLAG_SUPPORTS_SUSPEND,
+		.flags = IMX6_PCIE_FLAG_SUPPORTS_SUSPEND |
+			IMX6_PCIE_FLAG_GEN1_LAST,
 		.gpr = "fsl,imx8mm-iomuxc-gpr",
 		.clk_names = imx8mm_clks,
 		.clks_cnt = ARRAY_SIZE(imx8mm_clks),
 	},
 	[IMX8MP] = {
 		.variant = IMX8MP,
-		.flags = IMX6_PCIE_FLAG_SUPPORTS_SUSPEND,
+		.flags = IMX6_PCIE_FLAG_SUPPORTS_SUSPEND |
+			IMX6_PCIE_FLAG_GEN1_LAST,
 		.gpr = "fsl,imx8mp-iomuxc-gpr",
 		.clk_names = imx8mm_clks,
 		.clks_cnt = ARRAY_SIZE(imx8mm_clks),