3cde517a11
* ath79: add support for TP-Link TL-WR882N/WR885N/WR886N
This adds support for the various clones of the TL-WR885N recently
supported ("ath79: add support for TP-Link TL-WR885N v1"):
- tplink,tl-wr882n-v1
- tplink,tl-wr882n-v2
- tplink,tl-wr882n-v3
- tplink,tl-wr885n-v1
- tplink,tl-wr885n-v2
- tplink,tl-wr886n-v2
- tplink,tl-wr886n-v3
- tplink,tl-wr886n-v4
- tplink,tl-wr886n-v5
- tplink,tl-wr886n-v6
- tplink,tl-wr886n-v7
These devices are cloned in ar71xx. All models added in this patch are the same hardware CPU
WR885n V2 was tested.
Specifications:
- SOC: Qualcomm Atheros TP9343-AL3A
- CPU: 750MHz
- Flash: 2 MiB (AH1446 25Q16BS1G E5N102)
- RAM: 16 MiB (Zentel A3S28D40JTP-50)
- WLAN: Qualcomm Atheros TP9343 450Mbps
- Ethernet: Atheros AR8228/AR8229 4 port (100M)
添加TP9343芯片的路由器型号支持，TL-WR882N/WR885N/WR886N系列
* ath79: add support for MerCury MW4530R v1
重新添加水星MW4530R路由器支持
40 lines
1.6 KiB
Diff
40 lines
1.6 KiB
Diff
--- a/arch/mips/ath79/machtypes.h
|
|
+++ b/arch/mips/ath79/machtypes.h
|
|
@@ -312,6 +312,7 @@
|
|
ATH79_MACH_TL_WR841N_V9, /* TP-LINK TL-WR841N/ND v9 */
|
|
ATH79_MACH_TL_WR842N_V2, /* TP-LINK TL-WR842N/ND v2 */
|
|
ATH79_MACH_TL_WR842N_V3, /* TP-LINK TL-WR842N/ND v3 */
|
|
+ ATH79_MACH_TL_WR885N_V1, /* TP-LINK TL-WR885N/ND v1 */
|
|
ATH79_MACH_TL_WR902AC_V1, /* TP-LINK TL-WR902AC v1 */
|
|
ATH79_MACH_TL_WR941ND, /* TP-LINK TL-WR941ND */
|
|
ATH79_MACH_TL_WR941ND_V5, /* TP-LINK TL-WR941ND v5 */
|
|
===================================================================
|
|
--- a/arch/mips/ath79/Makefile
|
|
+++ b/arch/mips/ath79/Makefile
|
|
@@ -251,6 +251,7 @@
|
|
obj-$(CONFIG_ATH79_MACH_TL_WR841N_V1) += mach-tl-wr841n.o
|
|
obj-$(CONFIG_ATH79_MACH_TL_WR841N_V8) += mach-tl-wr841n-v8.o
|
|
obj-$(CONFIG_ATH79_MACH_TL_WR841N_V9) += mach-tl-wr841n-v9.o
|
|
+obj-$(CONFIG_ATH79_MACH_TL_WR885N_V1) += mach-tl-wr885n-v1.o
|
|
obj-$(CONFIG_ATH79_MACH_TL_WR902AC_V1) += mach-tl-wr902ac-v1.o
|
|
obj-$(CONFIG_ATH79_MACH_TL_WR941ND) += mach-tl-wr941nd.o
|
|
obj-$(CONFIG_ATH79_MACH_TL_WR941ND_V6) += mach-tl-wr941nd-v6.o
|
|
===================================================================
|
|
--- a/arch/mips/ath79/Kconfig.openwrt
|
|
+++ b/arch/mips/ath79/Kconfig.openwrt
|
|
@@ -2019,6 +2019,15 @@
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
+config ATH79_MACH_TL_WR885N_V1
|
|
+ bool "TP-LINK TL-WR882N / TL-WR885N / TL-WR886N support"
|
|
+ select SOC_QCA956X
|
|
+ select ATH79_DEV_ETH
|
|
+ select ATH79_DEV_GPIO_BUTTONS
|
|
+ select ATH79_DEV_LEDS_GPIO
|
|
+ select ATH79_DEV_M25P80
|
|
+ select ATH79_DEV_WMAC
|
|
+
|
|
config ATH79_MACH_TL_WR902AC_V1
|
|
bool "TP-LINK TL-WR902AC v1 support"
|
|
select SOC_QCA953X
|