diff --git a/applications/linkease/Makefile b/applications/linkease/Makefile
new file mode 100755
index 0000000..6fe56bf
--- /dev/null
+++ b/applications/linkease/Makefile
@@ -0,0 +1,66 @@
+#
+# Copyright (C) 2015-2016 OpenWrt.org
+# Copyright (C) 2020 jjm2473@gmail.com
+#
+# This is free software, licensed under the GNU General Public License v3.
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_ARCH_LINKEASE:=$(ARCH)
+
+PKG_NAME:=linkease
+PKG_VERSION:=0.5.2
+PKG_RELEASE:=2
+PKG_SOURCE:=$(PKG_NAME)-binary-$(PKG_VERSION).tar.gz
+PKG_SOURCE_URL:=http://fw.koolcenter.com/binary/LinkEase/LinuxStorage/
+PKG_HASH:=e79e5717f250cc293026ca9d0b785663e5a2906a2c748e62ac985c4bd1a038b6
+
+PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-binary-$(PKG_VERSION)
+
+PKG_BUILD_PARALLEL:=1
+PKG_USE_MIPS16:=0
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/$(PKG_NAME)
+	SECTION:=net
+	CATEGORY:=Network
+	SUBMENU:=Web Servers/Proxies
+	TITLE:=LinkEase - the file cloud
+	DEPENDS:=
+	URL:=https://www.ddnsto.com/linkease/
+endef
+
+define Package/$(PKG_NAME)/description
+  LinkEase is a file cloud
+endef
+
+define Package/$(PKG_NAME)/conffiles
+/etc/config/linkease
+endef
+
+define Package/$(PKG_NAME)/postinst
+#!/bin/sh
+if [ -z "$${IPKG_INSTROOT}" ]; then
+	[ -f /etc/uci-defaults/linkease ] && /etc/uci-defaults/linkease && rm -f /etc/uci-defaults/linkease
+fi
+endef
+
+define Build/Configure
+endef
+
+define Build/Compile
+endef
+
+define Package/$(PKG_NAME)/install
+	$(INSTALL_DIR) $(1)/usr/sbin/linkease-plugins $(1)/etc/config $(1)/etc/init.d $(1)/etc/uci-defaults
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/linkease.$(PKG_ARCH_LINKEASE) $(1)/usr/sbin/linkease
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/heif-converter.$(PKG_ARCH_LINKEASE) $(1)/usr/sbin/heif-converter
+	$(INSTALL_BIN) ./files/aria2.sh $(1)/usr/sbin/linkease-plugins/aria2.sh
+	$(INSTALL_CONF) ./files/linkease.config $(1)/etc/config/linkease
+	$(INSTALL_BIN) ./files/linkease.init $(1)/etc/init.d/linkease
+	$(INSTALL_BIN) ./files/linkease.uci-default $(1)/etc/uci-defaults/linkease
+endef
+
+$(eval $(call BuildPackage,$(PKG_NAME)))
diff --git a/applications/linkease/files/aria2.sh b/applications/linkease/files/aria2.sh
new file mode 100755
index 0000000..73626c3
--- /dev/null
+++ b/applications/linkease/files/aria2.sh
@@ -0,0 +1,134 @@
+#!/bin/bash
+
+sh_ver="1.0.0"
+export PATH=/usr/local/bin:/usr/local/sbin:/usr/bin:/usr/sbin:/sbin:/bin
+aria2_conf_dir=/var/etc/aria2/
+#替换成你设备aria2.conf路径
+aria2_conf=${aria2_conf_dir}/aria2.conf.main
+#替换成你设备的aria2c路径
+aria2c=/usr/bin/aria2c
+Green_font_prefix="\033[32m"
+Red_font_prefix="\033[31m"
+Green_background_prefix="\033[42;37m"
+Red_background_prefix="\033[41;37m"
+Font_color_suffix="\033[0m"
+Info="[${Green_font_prefix}信息${Font_color_suffix}]"
+Error="[${Red_font_prefix}错误${Font_color_suffix}]"
+Tip="[${Green_font_prefix}注意${Font_color_suffix}]"
+error_code=11
+success_code=0
+
+return_error(){
+	echo 'Content-Type:application/json;charset=utf-8'
+	echo
+	echo "{
+    		"\"success\"":$error_code, 
+		"\"error\"":"\"$1\"",    		
+		"\"result"\":null
+		}"
+	exit 1
+}
+return_ok(){
+	echo 'Content-Type:application/json;charset=utf-8'
+	echo
+	echo "{
+    		"\"success\"":$success_code, 
+		"\"error\"":"\"$1\"",    		
+		"\"result"\":null
+		}"
+	exit 0
+}
+return_result(){
+	echo 'Content-Type:application/json;charset=utf-8'
+	echo
+	echo "{
+    		"\"success\"":$success_code, 
+		"\"error\"":"\"\"",    		
+		"\"result"\":$1
+		}"
+	exit 0
+}
+
+#进程中是否运行aria2
+check_pid() {
+    PID=$(ps -ef | grep "aria2c" | grep -v grep | grep -v "aria2.sh" | grep -v "init.d" | grep -v "service" | awk '{print $2}')
+}
+
+#aria2是否正在运行
+aria2_work_status(){
+	check_pid
+#	[[ ! -z ${PID} ]] && echo -e "${Error} Aria2 正在运行，请检查 !" && exit 1
+	[[ ! -z ${PID} ]] && return_ok "Aria2正在运行"
+	return_error "Aria2未运行"
+}
+
+#检测设备是否安装aria2
+check_installed_status() {
+    [[ ! -e ${aria2c} ]] && return_error "Aria2 没有安装，请检查 !"
+    [[ ! -e ${aria2_conf} ]] && return_error "Aria2 配置文件不存在，请检查 !"
+#    return_ok "Aria2已安装"
+}
+#读取aria2配置信息
+read_config() {
+    check_installed_status
+    if [[ ! -e ${aria2_conf} ]]; then
+            return_error "Aria2 配置文件不存在，请检查 !"      
+    else
+        conf_text=$(cat ${aria2_conf} | grep -v '#')
+        aria2_dir=$(echo -e "${conf_text}" | grep "^dir=" | awk -F "=" '{print $NF}')
+        aria2_port=$(echo -e "${conf_text}" | grep "^rpc-listen-port=" | awk -F "=" '{print $NF}')
+        aria2_passwd=$(echo -e "${conf_text}" | grep "^rpc-secret=" | awk -F "=" '{print $NF}')
+        aria2_bt_port=$(echo -e "${conf_text}" | grep "^listen-port=" | awk -F "=" '{print $NF}')
+        aria2_dht_port=$(echo -e "${conf_text}" | grep "^dht-listen-port=" | awk -F "=" '{print $NF}')   
+
+	return_result "{
+			"\"dir"\":"\"$aria2_dir"\",
+			"\"rpc-listen-port"\":"\"$aria2_port"\",
+			"\"rpc-secret"\":"\"$aria2_passwd"\",
+			"\"listen-port"\":"\"$aria2_bt_port"\",
+			"\"dht-listen-port"\":"\"$aria2_dht_port"\"}"
+    fi
+}
+
+
+#"Content-Type:text/html;charset=utf-8"
+#echo
+ 
+#SERVER_SOFTWARE = $SERVER_SOFTWARE #服务器软件
+#SERVER_NAME = $SERVER_NAME         #服务器主机名
+#GATEWAY_INTERFACE = $GATEWAY_INTERFACE    #CGI版本
+#SERVER_PROTOCOL = $SERVER_PROTOCOL  #通信使用的协议
+#SERVER_PORT = $SERVER_PORT         #服务器的端口号
+#REQUEST_METHOD = $REQUEST_METHOD   #请求方法(GET/POST/PUT/DELETE..)
+#HTTP_ACCEPT = $HTTP_ACCEPT         #HTTP定义的浏览器能够接受的数据类型
+#SCRIPT_NAME = $SCRIPT_NAME         #当前运行的脚本名称(包含路径)
+#QUERY_STRING = $QUERY_STRING       #地址栏中传的数据（get方式）
+#REMOTE_ADDR = $REMOTE_ADDR         #客户端的ip
+
+#根据url QUERY调不同方法
+query(){
+	aria2Query=${QUERY_STRING}
+	parse(){
+	 	echo $1 | sed 's/.*'$2'=\([[:alnum:]]*\).*/\1/'
+	}
+	value=$(parse $aria2Query "action")
+			
+	if [ ! -z = "$value" ]
+		then
+			if [ "$value" = "status" ]
+			then
+			    check_installed_status
+			elif [ "$value" = "readConfig" ]
+			then
+			    read_config
+			elif [ "$value" = "workStatus" ]
+			then
+			    aria2_work_status
+			else
+			    echo 
+			fi
+		else
+	    return_error "action不能为空"
+	fi
+}
+query
diff --git a/applications/linkease/files/linkease.config b/applications/linkease/files/linkease.config
new file mode 100755
index 0000000..77dca48
--- /dev/null
+++ b/applications/linkease/files/linkease.config
@@ -0,0 +1,3 @@
+config linkease
+	option 'port' '8897'
+	option 'enabled' '1'
diff --git a/applications/linkease/files/linkease.init b/applications/linkease/files/linkease.init
new file mode 100755
index 0000000..5224920
--- /dev/null
+++ b/applications/linkease/files/linkease.init
@@ -0,0 +1,23 @@
+#!/bin/sh /etc/rc.common
+
+START=99
+USE_PROCD=1
+
+get_config() {
+	config_get_bool enabled $1 enabled 1
+	config_get_bool logger $1 logger
+	config_get port $1 port 8897
+}
+
+start_service() {
+	config_load linkease
+	config_foreach get_config linkease
+	[ $enabled != 1 ] && return 1
+
+	procd_open_instance
+	procd_set_param command /usr/sbin/linkease
+	[ -n "$port" ] && procd_append_param command --deviceAddr ":$port"
+	[ "$logger" == 1 ] && procd_set_param stderr 1
+	procd_set_param respawn
+	procd_close_instance
+}
diff --git a/applications/linkease/files/linkease.uci-default b/applications/linkease/files/linkease.uci-default
new file mode 100755
index 0000000..716c58e
--- /dev/null
+++ b/applications/linkease/files/linkease.uci-default
@@ -0,0 +1,22 @@
+#!/bin/sh
+
+uci -q batch <<-EOF >/dev/null
+	delete ucitrack.@linkease[-1]
+	add ucitrack linkease
+	set ucitrack.@linkease[-1].init=linkease
+	commit ucitrack
+
+	delete firewall.linkease
+	set firewall.linkease=rule
+	set firewall.linkease.name="linkease"
+	set firewall.linkease.target="ACCEPT"
+	set firewall.linkease.src="wan"
+	set firewall.linkease.proto="tcp"
+	set firewall.linkease.dest_port="8897"
+	commit firewall
+EOF
+
+/etc/init.d/linkease enable
+/etc/init.d/linkease start
+
+exit 0
\ No newline at end of file