bcm53xx: refresh kernel config

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>

.github/issue_template

@@ -1,13 +0,0 @@
-This repository is a mirror of our main repo at https://git.openwrt.org/openwrt/openwrt.git
-It is for reference only and is not active for checkins or for reporting issues.
-
-All issues should be reported at: https://bugs.openwrt.org
-
-Please do not open any NEW issue here - we will be closing the Github issues
-capability in the near future.
-
-We will continue to accept Pull Requests here as described in the repo description.
-
-Close this now and click here: https://bugs.openwrt.org
-
-Thankyou for your co-operation.

.github/labeler.yml

@@ -0,0 +1,103 @@
+# target/*
+"target/airoha":
+  - "target/linux/airoha/**"
+"target/apm821xx":
+  - "target/linux/apm821xx/**"
+"target/archs38":
+  - "target/linux/archs38/**"
+"target/armvirt":
+  - "target/linux/armvirt/**"
+"target/at91":
+  - "target/linux/at91/**"
+"target/ath25":
+  - "target/linux/ath25/**"
+"target/ath79":
+  - "target/linux/ath79/**"
+"target/bcm27xx":
+  - "target/linux/bcm27xx/**"
+"target/bcm47xx":
+  - "target/linux/bcm47xx/**"
+"target/bcm4908":
+  - "target/linux/bcm4908/**"
+"target/bcm53xx":
+  - "target/linux/bcm53xx/**"
+"target/bcm63xx":
+  - "target/linux/bcm63xx/**"
+"target/bmips":
+  - "target/linux/bmips/**"
+"target/gemini":
+  - "target/linux/gemini/**"
+"target/imx":
+  - "target/linux/imx/**"
+"target/ipq40xx":
+  - "target/linux/ipq40xx/**"
+"target/ipq806x":
+  - "target/linux/ipq806x/**"
+"target/kirkwood":
+  - "target/linux/kirkwood/**"
+"target/lantiq":
+  - "target/linux/lantiq/**"
+"target/layerscape":
+  - "target/linux/layerscape/**"
+"target/malta":
+  - "target/linux/malta/**"
+"target/mediatek":
+  - "target/linux/mediatek/**"
+"target/mpc85xx":
+  - "target/linux/mpc85xx/**"
+"target/mvebu":
+  - "target/linux/mvebu/**"
+"target/mxs":
+  - "target/linux/mxs/**"
+"target/octeon":
+  - "target/linux/octeon/**"
+"target/octeontx":
+  - "target/linux/octeontx/**"
+"target/omap":
+  - "target/linux/omap/**"
+"target/oxnas":
+  - "target/linux/oxnas/**"
+"target/pistachio":
+  - "target/linux/pistachio/**"
+"target/qoriq":
+  - "target/linux/qoriq/**"
+"target/ramips":
+  - "target/linux/ramips/**"
+"target/realtek":
+  - "target/linux/realtek/**"
+"target/rockchip":
+  - "target/linux/rockchip/**"
+"target/sunxi":
+  - "target/linux/sunxi/**"
+"target/tegra":
+  - "target/linux/tegra/**"
+"target/uml":
+  - "target/linux/uml/**"
+"target/x86":
+  - "target/linux/x86/**"
+"target/zynq":
+  - "target/linux/zynq/**"
+# target/imagebuilder
+"target/imagebuilder":
+  - "target/imagebuilder/**"
+# kernel
+"kernel":
+  - "target/linux/generic/**"
+  - "target/linux/**/config-*"
+  - "target/linux/**/patches-*"
+  - "target/linux/**/files/**"
+  - "package/kernel/linux/**"
+# core packages
+"core packages":
+  - "package/**"
+# build/scripts/tools
+"build/scripts/tools":
+  - "include/**"
+  - "scripts/**"
+  - "tools/**"
+# toolchain
+"toolchain":
+  - "toolchain/**"
+# GitHub/CI
+"GitHub/CI":
+  - ".github/**"

.github/workflows/Dockerfile.tools

@@ -0,0 +1,3 @@
+FROM registry.gitlab.com/openwrt/buildbot/buildworker-3.4.1
+
+COPY --chown=buildbot:buildbot tools.tar /tools.tar

.github/workflows/build.yml

@@ -0,0 +1,361 @@
+name: Build sub target
+
+on:
+  workflow_call:
+    inputs:
+      target:
+        required: true
+        type: string
+      testing:
+        type: boolean
+      build_toolchain:
+        type: boolean
+      include_feeds:
+        type: boolean
+      build_full:
+        type: boolean
+      build_all_modules:
+        type: boolean
+      build_all_kmods:
+        type: boolean
+      build_all_boards:
+        type: boolean
+
+permissions:
+  contents: read
+
+jobs:
+  setup_build:
+    name: Setup build
+    runs-on: ubuntu-latest
+    outputs:
+      owner_lc: ${{ steps.lower_owner.outputs.owner_lc }}
+      ccache_hash: ${{ steps.ccache_hash.outputs.ccache_hash }}
+      container_tag: ${{ steps.determine_tools_container.outputs.container_tag }}
+
+    steps:
+      - name: Checkout
+        uses: actions/checkout@v3
+
+      - name: Set lower case owner name
+        id: lower_owner
+        run: |
+          OWNER_LC=$(echo "${{ github.repository_owner }}" \
+            | tr '[:upper:]' '[:lower:]')
+          echo "owner_lc=$OWNER_LC" >> $GITHUB_OUTPUT
+
+      - name: Generate ccache hash
+        id: ccache_hash
+        run: |
+          CCACHE_HASH=$(md5sum include/kernel-* | awk '{ print $1 }' \
+           | md5sum | awk '{ print $1 }')
+          echo "ccache_hash=$CCACHE_HASH" >> $GITHUB_OUTPUT
+
+      # Per branch tools container tag
+      # By default stick to latest
+      # For official test targetting openwrt stable branch
+      # Get the branch or parse the tag and push dedicated tools containers
+      # For local test to use the correct container for stable release testing
+      # you need to use for the branch name a prefix of openwrt-[0-9][0-9].[0-9][0-9]-
+      - name: Determine tools container tag
+        id: determine_tools_container
+        run: |
+          CONTAINER_TAG=latest
+          if [ -n "${{ github.base_ref }}" ]; then
+            if echo "${{ github.base_ref }}" | grep -q -E '^openwrt-[0-9][0-9]\.[0-9][0-9]$'; then
+              CONTAINER_TAG="${{ github.base_ref }}"
+            fi
+          elif [ ${{ github.ref_type }} == "branch" ]; then
+            if echo "${{ github.ref_name }}" | grep -q -E '^openwrt-[0-9][0-9]\.[0-9][0-9]$'; then
+              CONTAINER_TAG=${{ github.ref_name }}
+            elif echo "${{ github.ref_name }}" | grep -q -E '^openwrt-[0-9][0-9]\.[0-9][0-9]-'; then
+              CONTAINER_TAG="$(echo ${{ github.ref_name }} | sed 's/^\(openwrt-[0-9][0-9]\.[0-9][0-9]\)-.*/\1/')"
+            fi
+          elif [ ${{ github.ref_type }} == "tag" ]; then
+            if echo "${{ github.ref_name }}" | grep -q -E '^v[0-9][0-9]\.[0-9][0-9]\..+'; then
+              CONTAINER_TAG=openwrt-"$(echo ${{ github.ref_name }} | sed 's/^v\([0-9][0-9]\.[0-9][0-9]\)\..\+/\1/')"
+            fi
+          fi
+          echo "Tools container to use tools:$CONTAINER_TAG"
+          echo "container_tag=$CONTAINER_TAG" >> $GITHUB_OUTPUT
+
+  build:
+    name: Build with external toolchain
+    needs: setup_build
+    runs-on: ubuntu-latest
+
+    container: ghcr.io/${{ needs.setup_build.outputs.owner_lc }}/tools:${{ needs.setup_build.outputs.container_tag }}
+
+    permissions:
+      contents: read
+      packages: read
+
+    steps:
+      - name: Checkout master directory
+        uses: actions/checkout@v3
+        with:
+          path: openwrt
+
+      - name: Checkout packages feed
+        if: inputs.include_feeds == true
+        uses: actions/checkout@v3
+        with:
+          repository: openwrt/packages
+          path: openwrt/feeds/packages
+
+      - name: Checkout luci feed
+        if: inputs.include_feeds == true
+        uses: actions/checkout@v3
+        with:
+          repository: openwrt/luci
+          path: openwrt/feeds/luci
+
+      - name: Checkout routing feed
+        if: inputs.include_feeds == true
+        uses: actions/checkout@v3
+        with:
+          repository: openwrt/routing
+          path: openwrt/feeds/routing
+
+      - name: Checkout telephony feed
+        if: inputs.include_feeds == true
+        uses: actions/checkout@v3
+        with:
+          repository: openwrt/telephony
+          path: openwrt/feeds/telephony
+
+      - name: Fix permission
+        run: |
+          chown -R buildbot:buildbot openwrt
+
+      - name: Initialization environment
+        run: |
+          TARGET=$(echo ${{ inputs.target }} | cut -d "/" -f 1)
+          SUBTARGET=$(echo ${{ inputs.target }} | cut -d "/" -f 2)
+          echo "TARGET=$TARGET" >> "$GITHUB_ENV"
+          echo "SUBTARGET=$SUBTARGET" >> "$GITHUB_ENV"
+
+      - name: Update & Install feeds
+        if: inputs.include_feeds == true
+        shell: su buildbot -c "sh -e {0}"
+        working-directory: openwrt
+        run: |
+          ./scripts/feeds update -a
+          ./scripts/feeds install -a
+
+      - name: Parse toolchain file
+        if: inputs.build_toolchain == false
+        id: parse-toolchain
+        working-directory: openwrt
+        run: |
+          TOOLCHAIN_PATH=snapshots
+
+          if [ -n "${{ github.base_ref }}" ]; then
+            if echo "${{ github.base_ref }}" | grep -q -E '^openwrt-[0-9][0-9]\.[0-9][0-9]$'; then
+              major_ver="$(echo ${{ github.base_ref }} | sed 's/^openwrt-/v/')"
+            fi
+          elif [ "${{ github.ref_type }}" = "branch" ]; then
+            if echo "${{ github.ref_name }}" | grep -q -E '^openwrt-[0-9][0-9]\.[0-9][0-9]$'; then
+              major_ver="$(echo ${{ github.ref_name }} | sed 's/^openwrt-/v/')"
+            elif echo "${{ github.ref_name }}" | grep -q -E '^openwrt-[0-9][0-9]\.[0-9][0-9]-'; then
+              major_ver="$(echo ${{ github.ref_name }} | sed 's/^openwrt-\([0-9][0-9]\.[0-9][0-9]\)-.*/v\1/')"
+            fi
+          elif [ "${{ github.ref_type }}" = "tag" ]; then
+            if echo "${{ github.ref_name }}" | grep -q -E '^v[0-9][0-9]\.[0-9][0-9]\..+'; then
+              major_ver="$(echo ${{ github.ref_name }} | sed 's/^\(v[0-9][0-9]\.[0-9][0-9]\)\..\+/\1/')"
+            fi
+          fi
+
+          if [ -n "$major_ver" ]; then
+            git fetch --tags -f
+            latest_tag="$(git tag --sort=-creatordate -l $major_ver* | head -n1)"
+            if [ -n "$latest_tag" ]; then
+              TOOLCHAIN_PATH=releases/$(echo $latest_tag | sed 's/^v//')
+            fi
+          fi
+
+          SUMS_FILE="https://downloads.cdn.openwrt.org/$TOOLCHAIN_PATH/targets/${{ env.TARGET }}/${{ env.SUBTARGET }}/sha256sums"
+          if curl $SUMS_FILE | grep -q ".*openwrt-toolchain.*tar.xz"; then
+            TOOLCHAIN_STRING="$( curl $SUMS_FILE | grep ".*openwrt-toolchain.*tar.xz")"
+            TOOLCHAIN_FILE=$(echo "$TOOLCHAIN_STRING" | sed -n -e 's/.*\(openwrt-toolchain.*\).tar.xz/\1/p')
+            TOOLCHAIN_SHA256=$(echo "$TOOLCHAIN_STRING" | cut -d ' ' -f 1)
+            
+            echo "toolchain-type=external_toolchain" >> $GITHUB_OUTPUT
+          elif curl $SUMS_FILE | grep -q ".*openwrt-sdk.*tar.xz"; then
+            TOOLCHAIN_STRING="$( curl $SUMS_FILE | grep ".*openwrt-sdk.*tar.xz")"
+            TOOLCHAIN_FILE=$(echo "$TOOLCHAIN_STRING" | sed -n -e 's/.*\(openwrt-sdk.*\).tar.xz/\1/p')
+            TOOLCHAIN_SHA256=$(echo "$TOOLCHAIN_STRING" | cut -d ' ' -f 1)
+
+            echo "toolchain-type=external_sdk" >> $GITHUB_OUTPUT
+          fi
+
+          echo "TOOLCHAIN_FILE=$TOOLCHAIN_FILE" >> "$GITHUB_ENV"
+          echo "TOOLCHAIN_SHA256=$TOOLCHAIN_SHA256" >> "$GITHUB_ENV"
+          echo "TOOLCHAIN_PATH=$TOOLCHAIN_PATH" >> "$GITHUB_ENV"
+
+      - name: Cache external toolchain/sdk
+        if: inputs.build_toolchain == false
+        id: cache-external-toolchain
+        uses: actions/cache@v3
+        with:
+          path: openwrt/${{ env.TOOLCHAIN_FILE }}
+          key: ${{ env.TOOLCHAIN_FILE }}-${{ steps.parse-toolchain.outputs.toolchain-type }}-${{ env.TOOLCHAIN_SHA256 }}
+
+      - name: Cache ccache
+        uses: actions/cache@v3
+        with:
+          path: openwrt/.ccache
+          key: ccache-kernel-${{ env.TARGET }}/${{ env.SUBTARGET }}-${{ needs.setup_build.outputs.ccache_hash }}
+          restore-keys: |
+            ccache-kernel-${{ env.TARGET }}/${{ env.SUBTARGET }}-
+
+      - name: Download external toolchain/sdk
+        if: inputs.build_toolchain == false && steps.cache-external-toolchain.outputs.cache-hit != 'true'
+        shell: su buildbot -c "sh -e {0}"
+        working-directory: openwrt
+        run: |
+          wget -O - https://downloads.cdn.openwrt.org/${{ env.TOOLCHAIN_PATH }}/targets/${{ env.TARGET }}/${{ env.SUBTARGET }}/${{ env.TOOLCHAIN_FILE }}.tar.xz \
+            | tar --xz -xf -
+
+      - name: Extract prebuilt tools
+        shell: su buildbot -c "sh -e {0}"
+        working-directory: openwrt
+        run: ./scripts/ext-tools.sh --tools /tools.tar
+
+      - name: Configure testing kernel
+        if: inputs.testing == true
+        shell: su buildbot -c "sh -e {0}"
+        working-directory: openwrt
+        run: |
+          echo CONFIG_TESTING_KERNEL=y >> .config
+
+      - name: Configure all kernel modules
+        if: inputs.build_all_kmods == true
+        shell: su buildbot -c "sh -e {0}"
+        working-directory: openwrt
+        run: |
+          echo CONFIG_ALL_KMODS=y >> .config
+
+      - name: Configure all modules
+        if: inputs.build_all_modules == true
+        shell: su buildbot -c "sh -e {0}"
+        working-directory: openwrt
+        run: |
+          echo CONFIG_ALL=y >> .config
+
+      - name: Configure all boards
+        if: inputs.build_all_boards == true
+        shell: su buildbot -c "sh -e {0}"
+        working-directory: openwrt
+        run: |
+          echo CONFIG_TARGET_MULTI_PROFILE=y >> .config
+          echo CONFIG_TARGET_PER_DEVICE_ROOTFS=y >> .config
+          echo CONFIG_TARGET_ALL_PROFILES=y >> .config
+
+      - name: Configure external toolchain
+        if: inputs.build_toolchain == false && steps.parse-toolchain.outputs.toolchain-type == 'external_toolchain'
+        shell: su buildbot -c "sh -e {0}"
+        working-directory: openwrt
+        run: |
+          echo CONFIG_DEVEL=y >> .config
+          echo CONFIG_AUTOREMOVE=y >> .config
+          echo CONFIG_CCACHE=y >> .config
+
+          ./scripts/ext-toolchain.sh \
+            --toolchain ${{ env.TOOLCHAIN_FILE }}/toolchain-* \
+            --overwrite-config \
+            --config ${{ env.TARGET }}/${{ env.SUBTARGET }}
+
+      - name: Adapt external sdk to external toolchain format
+        if: inputs.build_toolchain == false && steps.parse-toolchain.outputs.toolchain-type == 'external_sdk' && steps.cache-external-toolchain.outputs.cache-hit != 'true'
+        shell: su buildbot -c "sh -e {0}"
+        working-directory: openwrt
+        run: |
+          TOOLCHAIN_DIR=${{ env.TOOLCHAIN_FILE }}/staging_dir/$(ls ${{ env.TOOLCHAIN_FILE }}/staging_dir | grep toolchain)
+          TOOLCHAIN_BIN=$TOOLCHAIN_DIR/bin
+          OPENWRT_DIR=$(pwd)
+
+          # Find target name from toolchain info.mk
+          GNU_TARGET_NAME=$(cat $TOOLCHAIN_DIR/info.mk | grep TARGET_CROSS | sed 's/^TARGET_CROSS=\(.*\)-$/\1/')
+
+          cd $TOOLCHAIN_BIN
+
+          # Revert sdk wrapper scripts applied to all the bins
+          for app in $(find . -name "*.bin"); do
+            TARGET_APP=$(echo $app | sed 's/\.\/\.\(.*\)\.bin/\1/')
+            rm $TARGET_APP
+            mv .$TARGET_APP.bin $TARGET_APP
+          done
+
+          # Setup the wrapper script in the sdk toolchain dir simulating an external toolchain build
+          cp $OPENWRT_DIR/target/toolchain/files/wrapper.sh $GNU_TARGET_NAME-wrapper.sh
+          for app in cc gcc g++ c++ cpp ld as ; do
+            [ -f $GNU_TARGET_NAME-$app ] && mv $GNU_TARGET_NAME-$app $GNU_TARGET_NAME-$app.bin
+            ln -sf $GNU_TARGET_NAME-wrapper.sh $GNU_TARGET_NAME-$app
+          done
+
+      - name: Configure external toolchain with sdk
+        if: inputs.build_toolchain == false && steps.parse-toolchain.outputs.toolchain-type == 'external_sdk'
+        shell: su buildbot -c "sh -e {0}"
+        working-directory: openwrt
+        run: |
+          echo CONFIG_DEVEL=y >> .config
+          echo CONFIG_AUTOREMOVE=y >> .config
+          echo CONFIG_CCACHE=y >> .config
+
+          ./scripts/ext-toolchain.sh \
+            --toolchain ${{ env.TOOLCHAIN_FILE }}/staging_dir/toolchain-* \
+            --overwrite-config \
+            --config ${{ env.TARGET }}/${{ env.SUBTARGET }}
+
+      - name: Configure internal toolchain
+        if: inputs.build_toolchain == true
+        shell: su buildbot -c "sh -e {0}"
+        working-directory: openwrt
+        run: |
+          echo CONFIG_DEVEL=y >> .config
+          echo CONFIG_AUTOREMOVE=y >> .config
+          echo CONFIG_CCACHE=y >> .config
+
+          echo "CONFIG_TARGET_${{ env.TARGET }}=y" >> .config
+          echo "CONFIG_TARGET_${{ env.TARGET }}_${{ env.SUBTARGET }}=y" >> .config
+
+          make defconfig
+
+      - name: Show configuration
+        shell: su buildbot -c "sh -e {0}"
+        working-directory: openwrt
+        run: ./scripts/diffconfig.sh
+
+      - name: Build tools
+        shell: su buildbot -c "sh -e {0}"
+        working-directory: openwrt
+        run: make tools/install -j$(nproc) BUILD_LOG=1 || ret=$? .github/workflows/scripts/show_build_failures.sh
+
+      - name: Build toolchain
+        shell: su buildbot -c "sh -e {0}"
+        working-directory: openwrt
+        run: make toolchain/install -j$(nproc) BUILD_LOG=1 || ret=$? .github/workflows/scripts/show_build_failures.sh
+
+      - name: Build Kernel
+        shell: su buildbot -c "sh -e {0}"
+        working-directory: openwrt
+        run: make target/compile -j$(nproc) BUILD_LOG=1 || ret=$? .github/workflows/scripts/show_build_failures.sh
+
+      - name: Build Kernel Kmods
+        shell: su buildbot -c "sh -e {0}"
+        working-directory: openwrt
+        run: make package/linux/compile -j$(nproc) BUILD_LOG=1 || ret=$? .github/workflows/scripts/show_build_failures.sh
+
+      - name: Build everything
+        if: inputs.build_full == true
+        shell: su buildbot -c "sh -e {0}"
+        working-directory: openwrt
+        run: make -j$(nproc) BUILD_LOG=1 || ret=$? .github/workflows/scripts/show_build_failures.sh
+
+      - name: Upload logs
+        if: failure()
+        uses: actions/upload-artifact@v3
+        with:
+          name: ${{ env.TARGET }}-${{ env.SUBTARGET }}-logs
+          path: "openwrt/logs"

.github/workflows/check-kernel-patches.yml

@@ -0,0 +1,131 @@
+name: Refresh kernel for target
+
+on:
+  workflow_call:
+    inputs:
+      target:
+        required: true
+        type: string
+      testing:
+        type: boolean
+
+permissions:
+  contents: read
+
+jobs:
+  setup_build:
+    name: Setup build
+    runs-on: ubuntu-latest
+    outputs:
+      owner_lc: ${{ steps.lower_owner.outputs.owner_lc }}
+      container_tag: ${{ steps.determine_tools_container.outputs.container_tag }}
+
+    steps:
+      - name: Set lower case owner name
+        id: lower_owner
+        run: |
+          OWNER_LC=$(echo "${{ github.repository_owner }}" \
+            | tr '[:upper:]' '[:lower:]')
+          echo "owner_lc=$OWNER_LC" >> $GITHUB_OUTPUT
+
+      # Per branch tools container tag
+      # By default stick to latest
+      # For official test targetting openwrt stable branch
+      # Get the branch or parse the tag and push dedicated tools containers
+      # For local test to use the correct container for stable release testing
+      # you need to use for the branch name a prefix of openwrt-[0-9][0-9].[0-9][0-9]-
+      - name: Determine tools container tag
+        id: determine_tools_container
+        run: |
+          CONTAINER_TAG=latest
+          if [ -n "${{ github.base_ref }}" ]; then
+            if echo "${{ github.base_ref }}" | grep -q -E '^openwrt-[0-9][0-9]\.[0-9][0-9]$'; then
+              CONTAINER_TAG="${{ github.base_ref }}"
+            fi
+          elif [ ${{ github.ref_type }} == "branch" ]; then
+            if echo "${{ github.ref_name }}" | grep -q -E '^openwrt-[0-9][0-9]\.[0-9][0-9]$'; then
+              CONTAINER_TAG=${{ github.ref_name }}
+            elif echo "${{ github.ref_name }}" | grep -q -E '^openwrt-[0-9][0-9]\.[0-9][0-9]-'; then
+              CONTAINER_TAG="$(echo ${{ github.ref_name }} | sed 's/^\(openwrt-[0-9][0-9]\.[0-9][0-9]\)-.*/\1/')"
+            fi
+          elif [ ${{ github.ref_type }} == "tag" ]; then
+            if echo "${{ github.ref_name }}" | grep -q -E '^v[0-9][0-9]\.[0-9][0-9]\..+'; then
+              CONTAINER_TAG=openwrt-"$(echo ${{ github.ref_name }} | sed 's/^v\([0-9][0-9]\.[0-9][0-9]\)\..\+/\1/')"
+            fi
+          fi
+          echo "Tools container to use tools:$CONTAINER_TAG"
+          echo "container_tag=$CONTAINER_TAG" >> $GITHUB_OUTPUT
+
+  check-patch:
+    name: Check Kernel patches
+    needs: setup_build
+    runs-on: ubuntu-latest
+
+    container: ghcr.io/${{ needs.setup_build.outputs.owner_lc }}/tools:${{ needs.setup_build.outputs.container_tag }}
+
+    permissions:
+      contents: read
+      packages: read
+
+    steps:
+      - name: Checkout master directory
+        uses: actions/checkout@v3
+        with:
+          path: openwrt
+
+      - name: Fix permission
+        run: |
+          chown -R buildbot:buildbot openwrt
+
+      - name: Initialization environment
+        run: |
+          TARGET=$(echo ${{ inputs.target }} | cut -d "/" -f 1)
+          SUBTARGET=$(echo ${{ inputs.target }} | cut -d "/" -f 2)
+          echo "TARGET=$TARGET" >> "$GITHUB_ENV"
+          echo "SUBTARGET=$SUBTARGET" >> "$GITHUB_ENV"
+
+      - name: Extract prebuilt tools
+        shell: su buildbot -c "sh -e {0}"
+        working-directory: openwrt
+        run: ./scripts/ext-tools.sh --tools /tools.tar
+
+      - name: Configure testing kernel
+        if: inputs.testing == true
+        shell: su buildbot -c "sh -e {0}"
+        working-directory: openwrt
+        run: |
+          echo CONFIG_TESTING_KERNEL=y >> .config
+
+      - name: Configure system
+        shell: su buildbot -c "sh -e {0}"
+        working-directory: openwrt
+        run: |
+          echo CONFIG_ALL_KMODS=y >> .config
+          echo CONFIG_DEVEL=y >> .config
+          echo CONFIG_AUTOREMOVE=y >> .config
+          echo CONFIG_CCACHE=y >> .config
+
+          echo "CONFIG_TARGET_${{ env.TARGET }}=y" >> .config
+          echo "CONFIG_TARGET_${{ env.TARGET }}_${{ env.SUBTARGET }}=y" >> .config
+
+          make defconfig
+
+      - name: Build tools
+        shell: su buildbot -c "sh -e {0}"
+        working-directory: openwrt
+        run: make tools/quilt/compile -j$(nproc) BUILD_LOG=1 || ret=$? .github/workflows/scripts/show_build_failures.sh
+
+      - name: Refresh Kernel patches
+        shell: su buildbot -c "sh -e {0}"
+        working-directory: openwrt
+        run: |
+          make target/linux/refresh V=s
+
+          . .github/workflows/scripts/ci_helpers.sh
+
+          if git diff --name-only --exit-code; then
+            success "Kernel patches for ${{ env.TARGET }}/${{ env.SUBTARGET }} seems ok"
+          else
+            err "Kernel patches for ${{ env.TARGET }}/${{ env.SUBTARGET }} require refresh. (run 'make target/linux/refresh' and force push this pr)"
+            exit 1
+          fi

.github/workflows/formal.yml

@@ -0,0 +1,73 @@
+name: Test Formalities
+
+on:
+  pull_request:
+
+permissions:
+  contents: read
+
+jobs:
+  build:
+    name: Test Formalities
+    runs-on: ubuntu-latest
+    strategy:
+      fail-fast: false
+
+    steps:
+      - uses: actions/checkout@v3
+        with:
+          ref: ${{ github.event.pull_request.head.sha }}
+          fetch-depth: 0
+
+      - name: Determine branch name
+        run: |
+          BRANCH="${GITHUB_BASE_REF#refs/heads/}"
+          echo "Building for $BRANCH"
+          echo "BRANCH=$BRANCH" >> $GITHUB_ENV
+
+      - name: Test formalities
+        run: |
+          source .github/workflows/scripts/ci_helpers.sh
+
+          RET=0
+          for commit in $(git rev-list HEAD ^origin/$BRANCH); do
+            info "=== Checking commit '$commit'"
+            if git show --format='%P' -s $commit | grep -qF ' '; then
+              err "Pull request should not include merge commits"
+              RET=1
+            fi
+
+            author="$(git show -s --format=%aN $commit)"
+            if echo $author | grep -q '\S\+\s\+\S\+'; then
+              success "Author name ($author) seems ok"
+            else
+              err "Author name ($author) need to be your real name 'firstname lastname'"
+              RET=1
+            fi
+
+            subject="$(git show -s --format=%s $commit)"
+            if echo "$subject" | grep -q -e '^[0-9A-Za-z,+/_\.-]\+: ' -e '^Revert '; then
+              success "Commit subject line seems ok ($subject)"
+            else
+              err "Commit subject line MUST start with '<area>: ' ($subject)"
+              RET=1
+            fi
+
+            body="$(git show -s --format=%b $commit)"
+            sob="$(git show -s --format='Signed-off-by: %aN <%aE>' $commit)"
+            if echo "$body" | grep -qF "$sob"; then
+              success "Signed-off-by match author"
+            else
+              err "Signed-off-by is missing or doesn't match author (should be '$sob')"
+              RET=1
+            fi
+
+            if echo "$body" | grep -v "Signed-off-by:"; then
+              success "A commit message exists"
+            else
+              err "Missing commit message. Please describe your changes"
+              RET=1
+            fi
+          done
+
+          exit $RET

.github/workflows/kernel.yml

@@ -0,0 +1,85 @@
+name: Build Kernel
+
+on:
+  pull_request:
+    paths:
+      - '.github/workflows/check-kernel-patches.yml'
+      - '.github/workflows/build.yml'
+      - '.github/workflows/kernel.yml'
+      - 'include/kernel*'
+      - 'package/kernel/**'
+      - 'target/linux/generic/**'
+  push:
+    paths:
+      - '.github/workflows/check-kernel-patches.yml'
+      - '.github/workflows/build.yml'
+      - '.github/workflows/kernel.yml'
+      - 'include/kernel*'
+      - 'package/kernel/**'
+      - 'target/linux/generic/**'
+
+permissions:
+  contents: read
+
+jobs:
+  determine_targets:
+    name: Set targets
+    runs-on: ubuntu-latest
+    outputs:
+      target: ${{ steps.find_targets.outputs.target }}
+
+    steps:
+      - name: Checkout
+        uses: actions/checkout@v3
+
+      - name: Set targets
+        id: find_targets
+        run: |
+          export TARGETS="$(perl ./scripts/dump-target-info.pl targets 2>/dev/null \
+            | sort -u -t '/' -k1,1 \
+            | awk '{ print $1 }')"
+
+          JSON='['
+          FIRST=1
+          for TARGET in $TARGETS; do
+            [[ $FIRST -ne 1 ]] && JSON="$JSON"','
+            JSON="$JSON"'"'"${TARGET}"'"'
+            FIRST=0
+          done
+          JSON="$JSON"']'
+
+           echo -e "\n---- targets ----\n"
+           echo "$JSON"
+           echo -e "\n---- targets ----\n"
+
+           echo "target=$JSON" >> $GITHUB_OUTPUT
+
+  build:
+    name: Build Kernel with external toolchain
+    needs: determine_targets
+    permissions:
+      contents: read
+      packages: read
+    strategy:
+       fail-fast: False
+       matrix:
+         target: ${{fromJson(needs.determine_targets.outputs.target)}}
+    uses: ./.github/workflows/build.yml
+    with:
+      target: ${{ matrix.target }}
+      build_all_kmods: true
+
+  check-kernel-patches:
+    name: Check Kernel patches
+    needs: determine_targets
+    permissions:
+      contents: read
+      packages: read
+    strategy:
+       fail-fast: False
+       matrix:
+         target: ${{fromJson(needs.determine_targets.outputs.target)}}
+    uses: ./.github/workflows/check-kernel-patches.yml
+    with:
+      target: ${{ matrix.target }}
+

.github/workflows/labeler.yml

@@ -0,0 +1,33 @@
+name: 'Pull Request Labeler'
+on:
+  - pull_request_target
+
+permissions:
+  contents: read
+
+jobs:
+  labeler:
+    permissions:
+      contents: read # to determine modified files (actions/labeler)
+      pull-requests: write # to add labels to PRs (actions/labeler)
+
+    name: Pull Request Labeler
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/labeler@v4
+        with:
+          repo-token: '${{ secrets.GITHUB_TOKEN }}'
+
+      - name: Check Branch
+        id: check-branch
+        run: |
+          if echo "${{ github.base_ref }}" | grep -q -E 'openwrt-[0-9][0-9]\.[0-9][0-9]'; then
+              echo "release-tag=$(echo ${{ github.base_ref }} | sed 's/openwrt-/release\//')" >> $GITHUB_OUTPUT
+          fi
+
+      - uses: buildsville/add-remove-label@v2.0.0
+        if: ${{ steps.check-branch.outputs.release-tag }}
+        with:
+          token: ${{secrets.GITHUB_TOKEN}}
+          labels: ${{ steps.check-branch.outputs.release-tag }}
+          type: add

.github/workflows/packages.yml

@@ -0,0 +1,43 @@
+name: Build all core packages
+
+on:
+  pull_request:
+    paths:
+      - '.github/workflows/build.yml'
+      - '.github/workflows/packages.yml'
+      - 'config/**'
+      - 'include/**'
+      - 'package/**'
+      - 'target/linux/generic/**'
+      - 'toolchain/**'
+  push:
+    paths:
+      - '.github/workflows/build.yml'
+      - '.github/workflows/packages.yml'
+      - 'config/**'
+      - 'include/**'
+      - 'package/**'
+      - 'target/linux/generic/**'
+      - 'toolchain/**'
+
+permissions:
+  contents: read
+
+jobs:
+  build:
+    permissions:
+      contents: read
+      packages: read
+    strategy:
+      fail-fast: False
+      matrix:
+        include:
+          - target: malta/be
+          - target: x86/64
+    uses: ./.github/workflows/build.yml
+    with:
+      target: ${{ matrix.target }}
+      build_all_kmods: true
+      build_all_modules: true
+      build_full: true
+

.github/workflows/scripts/ci_helpers.sh

@@ -0,0 +1,26 @@
+#!/bin/sh
+
+color_out() {
+	printf "\e[0;$1m%s\e[0;0m\n" "$2"
+}
+
+success() {
+	color_out 32 "$1"
+}
+
+info() {
+	color_out 36 "$1"
+}
+
+err() {
+	color_out 31 "$1"
+}
+
+warn() {
+	color_out 33 "$1"
+}
+
+err_die() {
+	err "$1"
+	exit 1
+}

.github/workflows/scripts/show_build_failures.sh

@@ -0,0 +1,15 @@
+#!/bin/bash
+
+original_exit_code="${ret:-1}"
+log_dir_path="${1:-logs}"
+context="${2:-10}"
+
+show_make_build_errors() {
+	grep -slr 'make\[[[:digit:]]\].*Error [[:digit:]]$' "$log_dir_path" | while IFS= read -r log_file; do
+		printf "====== Make errors from %s ======\n" "$log_file";
+		grep -r -C"$context" 'make\[[[:digit:]]\].*Error [[:digit:]]$' "$log_file" ;
+	done
+}
+
+show_make_build_errors
+exit "$original_exit_code"

.github/workflows/tools.yml

@@ -0,0 +1,226 @@
+name: Build host tools
+
+on:
+  pull_request:
+    paths:
+      - 'tools/**'
+      - '.github/workflows/tools.yml'
+  push:
+    paths:
+      - 'tools/**'
+      - '.github/workflows/tools.yml'
+
+permissions:
+  contents: read
+
+jobs:
+  build-macos-latest:
+    if: github.event_name != 'push'
+    runs-on: macos-latest
+
+    steps:
+      - name: Checkout
+        uses: actions/checkout@v3
+        with:
+          path: openwrt
+
+      - name: Setup MacOS
+        run: |
+          echo "WORKPATH=/Volumes/OpenWrt" >> "$GITHUB_ENV"
+          hdiutil create -size 20g -type SPARSE -fs "Case-sensitive HFS+" -volname OpenWrt OpenWrt.sparseimage
+          hdiutil attach OpenWrt.sparseimage
+          mv "$GITHUB_WORKSPACE/openwrt" /Volumes/OpenWrt/
+
+      - name: Install required prereq on MacOS
+        working-directory: ${{ env.WORKPATH }}/openwrt
+        run: |
+          brew install \
+            autoconf \
+            automake \
+            coreutils \
+            diffutils \
+            findutils \
+            gawk \
+            gettext \
+            git-extras \
+            gmp \
+            gnu-getopt \
+            gnu-sed \
+            gnu-tar \
+            grep \
+            libidn2 \
+            libunistring \
+            m4 \
+            make \
+            mpfr \
+            ncurses \
+            openssl@1.1 \
+            pcre \
+            pkg-config \
+            quilt \
+            readline \
+            wget \
+            zstd
+
+            echo "/bin" >> "$GITHUB_PATH"
+            echo "/sbin/Library/Apple/usr/bin" >> "$GITHUB_PATH"
+            echo "/usr/bin" >> "$GITHUB_PATH"
+            echo "/usr/local/bin" >> "$GITHUB_PATH"
+            echo "/usr/local/opt/coreutils/bin" >> "$GITHUB_PATH"
+            echo "/usr/local/opt/findutils/libexec/gnubin" >> "$GITHUB_PATH"
+            echo "/usr/local/opt/gettext/bin" >> "$GITHUB_PATH"
+            echo "/usr/local/opt/gnu-getopt/bin" >> "$GITHUB_PATH"
+            echo "/usr/local/opt/make/libexec/gnubin" >> "$GITHUB_PATH"
+            echo "/usr/local/opt/make/libexec/gnubin" >> "$GITHUB_PATH"
+            echo "/usr/sbin" >> "$GITHUB_PATH"
+
+      - name: Make prereq
+        working-directory: ${{ env.WORKPATH }}/openwrt
+        run: make defconfig
+
+      - name: Build tools MacOS
+        working-directory: ${{ env.WORKPATH }}/openwrt
+        run: make tools/install -j$(nproc) BUILD_LOG=1 || ret=$? .github/workflows/scripts/show_build_failures.sh
+
+      - name: Upload logs
+        if: always()
+        uses: actions/upload-artifact@v3
+        with:
+          name: macos-latest-logs
+          path: ${{ env.WORKPATH }}/openwrt/logs
+
+      - name: Upload config
+        if: always()
+        uses: actions/upload-artifact@v3
+        with:
+          name: macos-latest-config
+          path: ${{ env.WORKPATH }}/openwrt/.config
+
+  build-linux-buildbot:
+    runs-on: ubuntu-latest
+    container: registry.gitlab.com/openwrt/buildbot/buildworker-3.4.1
+
+    steps:
+      - name: Checkout
+        uses: actions/checkout@v3
+        with:
+          path: 'openwrt'
+
+      - name: Fix permission
+        run: |
+          chown -R buildbot:buildbot openwrt
+
+      - name: Set configs for tools container
+        if: github.event_name == 'push'
+        shell: su buildbot -c "sh -e {0}"
+        working-directory: openwrt
+        run: |
+          touch .config
+          echo CONFIG_DEVEL=y >> .config
+          echo CONFIG_AUTOREMOVE=y >> .config
+          echo CONFIG_CCACHE=y >> .config
+
+      - name: Make prereq
+        shell: su buildbot -c "sh -e {0}"
+        working-directory: openwrt
+        run: make defconfig
+
+      - name: Build tools BuildBot Container
+        shell: su buildbot -c "sh -e {0}"
+        working-directory: openwrt
+        run: make tools/install -j$(nproc) BUILD_LOG=1 || ret=$? .github/workflows/scripts/show_build_failures.sh
+
+      - name: Upload logs
+        if: always()
+        uses: actions/upload-artifact@v3
+        with:
+          name: linux-buildbot-logs
+          path: openwrt/logs
+
+      - name: Upload config
+        if: always()
+        uses: actions/upload-artifact@v3
+        with:
+          name: linux-buildbot-config
+          path: openwrt/.config
+
+      - name: Archive prebuilt tools
+        if: github.event_name == 'push'
+        shell: su buildbot -c "sh -e {0}"
+        working-directory: openwrt
+        run: tar --mtime=now -cf tools.tar staging_dir/host build_dir/host dl
+
+      - name: Upload prebuilt tools
+        if: github.event_name == 'push'
+        uses: actions/upload-artifact@v3
+        with:
+          name: linux-buildbot-prebuilt-tools
+          path: openwrt/tools.tar
+          retention-days: 1
+
+  push-tools-container:
+    needs: build-linux-buildbot
+    runs-on: ubuntu-latest
+    if: github.event_name == 'push'
+
+    permissions:
+      contents: read
+      packages: write
+
+    steps:
+      - name: Set lower case owner name
+        env:
+          OWNER: ${{ github.repository_owner }}
+        run: |
+          echo "OWNER_LC=${OWNER,,}" >> "$GITHUB_ENV"
+
+      # Per branch tools container tag
+      # By default stick to latest
+      # For official test targetting openwrt stable branch
+      # Get the branch or parse the tag and push dedicated tools containers
+      # Any branch that will match this pattern openwrt-[0-9][0-9].[0-9][0-9]
+      # will refresh the tools container with the matching tag.
+      # (example branch openwrt-22.03 -> tools:openwrt-22.03)
+      # (example branch openwrt-22.03-test -> tools:openwrt-22.03)
+      - name: Determine tools container tag
+        run: |
+          CONTAINER_TAG=latest
+
+          if [ ${{ github.ref_type }} == "branch" ]; then
+            if echo "${{ github.ref_name }}" | grep -q -E 'openwrt-[0-9][0-9]\.[0-9][0-9]'; then
+              CONTAINER_TAG="$(echo ${{ github.ref_name }} | sed 's/^\(openwrt-[0-9][0-9]\.[0-9][0-9]\).*/\1/')"
+            fi
+          elif [ ${{ github.ref_type }} == "tag" ]; then
+            if echo "${{ github.ref_name }}" | grep -q -E 'v[0-9][0-9]\.[0-9][0-9]\..+'; then
+              CONTAINER_TAG=openwrt-"$(echo ${{ github.ref_name }} | sed 's/v\([0-9][0-9]\.[0-9][0-9]\)\..\+/\1/')"
+            fi
+          fi
+
+          echo "Tools container to push tools:$CONTAINER_TAG"
+          echo "CONTAINER_TAG=$CONTAINER_TAG" >> "$GITHUB_ENV"
+
+      - name: Checkout
+        uses: actions/checkout@v3
+        with:
+          path: 'openwrt'
+
+      - name: Download prebuilt tools from build job
+        uses: actions/download-artifact@v3
+        with:
+          name: linux-buildbot-prebuilt-tools
+          path: openwrt
+
+      - name: Login to GitHub Container Registry
+        uses: docker/login-action@v2
+        with:
+          registry: ghcr.io
+          username: ${{ github.actor }}
+          password: ${{ secrets.GITHUB_TOKEN }}
+
+      - name: Build and push
+        uses: docker/build-push-action@v3
+        with:
+          context: openwrt
+          push: true
+          tags: ghcr.io/${{ env.OWNER_LC }}/tools:${{ env.CONTAINER_TAG }}
+          file: openwrt/.github/workflows/Dockerfile.tools

.gitignore

@@ -29,3 +29,4 @@ git-src
 .project
 .cproject
 .ccache
+.vscode

Makefile

@@ -14,7 +14,7 @@ $(if $(findstring $(space),$(TOPDIR)),$(error ERROR: The path to the OpenWrt dir
 
 world:
 
-DISTRO_PKG_CONFIG:=$(shell command -pv pkg-config | grep -E '\/usr' | head -n 1)
+DISTRO_PKG_CONFIG:=$(shell which -a pkg-config | grep '/usr' | head -n 1)
 export PATH:=$(TOPDIR)/staging_dir/host/bin:$(PATH)
 
 ifneq ($(OPENWRT_BUILD),1)

README.md

@@ -26,7 +26,7 @@ documentation.
 
 ```
 gcc binutils bzip2 flex python3 perl make find grep diff unzip gawk getopt
-subversion libz-dev libc-dev rsync
+subversion libz-dev libc-dev rsync which
 ```
 
 ### Quickstart
@@ -57,8 +57,8 @@ packages to OpenWrt, please find the fitting repository below.
 * [OpenWrt Packages](https://github.com/openwrt/packages): Community repository
   of ported packages.
 
-* [OpenWrt Routing](https://github.com/openwrt-routing/packages): Packages
+* [OpenWrt Routing](https://github.com/openwrt/routing): Packages specifically
-  specifically focused on (mesh) routing.
+  focused on (mesh) routing.
 
 ## Support Information
 
@@ -74,13 +74,13 @@ For a list of supported devices see the [OpenWrt Hardware Database](https://open
 ### Support Community
 
 * [Forum](https://forum.openwrt.org): For usage, projects, discussions and hardware advise.
-* [Support Chat](https://webchat.freenode.net/#openwrt): Channel `#openwrt` on freenode.net.
+* [Support Chat](https://webchat.oftc.net/#openwrt): Channel `#openwrt` on **oftc.net**.
 
 ### Developer Community
 
 * [Bug Reports](https://bugs.openwrt.org): Report bugs in OpenWrt
 * [Dev Mailing List](https://lists.openwrt.org/mailman/listinfo/openwrt-devel): Send patches
-* [Dev Chat](https://webchat.freenode.net/#openwrt-devel): Channel `#openwrt-devel` on freenode.net.
+* [Dev Chat](https://webchat.oftc.net/#openwrt-devel): Channel `#openwrt-devel` on **oftc.net**.
 
 ## License
 

config/Config-build.in

@@ -58,6 +58,10 @@ menu "Global build settings"
 		bool "Enable signature checking in opkg"
 		default SIGNED_PACKAGES
 
+	config DOWNLOAD_CHECK_CERTIFICATE
+		bool "Enable TLS certificate verification during package download"
+		default y
+
 	comment "General build options"
 
 	config TESTING_KERNEL
@@ -160,7 +164,6 @@ menu "Global build settings"
 
 	choice
 		prompt "Binary stripping method"
-		default USE_STRIP   if EXTERNAL_TOOLCHAIN
 		default USE_STRIP   if USE_GLIBC
 		default USE_SSTRIP
 		help

config/Config-devel.in

@@ -74,6 +74,11 @@ menuconfig DEVEL
 		  Store ccache in this directory.
 		  If not set, uses './.ccache'
 
+	config KERNEL_CFLAGS
+		string "Kernel extra CFLAGS" if DEVEL
+		default "-falign-functions=32" if TARGET_bcm53xx
+		default ""
+
 	config EXTERNAL_KERNEL_TREE
 		string "Use external kernel tree" if DEVEL
 		default ""

config/Config-kernel.in

@@ -436,34 +436,22 @@ config KERNEL_PROVE_LOCKING
 	select KERNEL_DEBUG_KERNEL
 	default n
 
-config KERNEL_LOCKUP_DETECTOR
+config KERNEL_SOFTLOCKUP_DETECTOR
-	bool "Compile the kernel with detect Hard and Soft Lockups"
+	bool "Compile the kernel with detect Soft Lockups"
 	depends on KERNEL_DEBUG_KERNEL
 	help
 	  Say Y here to enable the kernel to act as a watchdog to detect
-	  hard and soft lockups.
+	  soft lockups.
 
 	  Softlockups are bugs that cause the kernel to loop in kernel
 	  mode for more than 20 seconds, without giving other tasks a
 	  chance to run.  The current stack trace is displayed upon
 	  detection and the system will stay locked up.
 
-	  Hardlockups are bugs that cause the CPU to loop in kernel mode
-	  for more than 10 seconds, without letting other interrupts have a
-	  chance to run.  The current stack trace is displayed upon detection
-	  and the system will stay locked up.
-
-	  The overhead should be minimal.  A periodic hrtimer runs to
-	  generate interrupts and kick the watchdog task every 4 seconds.
-	  An NMI is generated every 10 seconds or so to check for hardlockups.
-
-	  The frequency of hrtimer and NMI events and the soft and hard lockup
-	  thresholds can be controlled through the sysctl watchdog_thresh.
-
 config KERNEL_DETECT_HUNG_TASK
 	bool "Compile the kernel with detect Hung Tasks"
 	depends on KERNEL_DEBUG_KERNEL
-	default KERNEL_LOCKUP_DETECTOR
+	default KERNEL_SOFTLOCKUP_DETECTOR
 	help
 	  Say Y here to enable the kernel to detect "hung tasks",
 	  which are bugs that cause the task to be stuck in

feeds.conf.default

@@ -1,10 +1,5 @@
-src-git packages https://git.openwrt.org/feed/packages.git
+src-git-full packages https://git.openwrt.org/feed/packages.git;openwrt-21.02
-src-git luci https://git.openwrt.org/project/luci.git
+src-git-full luci https://git.openwrt.org/project/luci.git;openwrt-21.02
-src-git routing https://git.openwrt.org/feed/routing.git
+src-git-full routing https://git.openwrt.org/feed/routing.git;openwrt-21.02
-src-git telephony https://git.openwrt.org/feed/telephony.git
+src-git-full telephony https://git.openwrt.org/feed/telephony.git;openwrt-21.02
-src-git freifunk https://github.com/freifunk/openwrt-packages.git
-#src-git video https://github.com/openwrt/video.git
-#src-git targets https://github.com/openwrt/targets.git
-#src-git management https://github.com/openwrt-management/packages.git
-#src-git oldpackages http://git.openwrt.org/packages.git
 #src-link custom /usr/src/openwrt/custom-feed

include/cmake.mk

@@ -15,7 +15,7 @@ MAKE_PATH = $(firstword $(CMAKE_BINARY_SUBDIR) .)
 ifeq ($(CONFIG_EXTERNAL_TOOLCHAIN),)
   cmake_tool=$(TOOLCHAIN_DIR)/bin/$(1)
 else
-  cmake_tool=$(shell command -v $(1))
+  cmake_tool=$(shell which $(1))
 endif
 
 ifeq ($(CONFIG_CCACHE),)

include/depends.mk

@@ -12,6 +12,7 @@
 DEP_FINDPARAMS := -x "*/.svn*" -x ".*" -x "*:*" -x "*\!*" -x "* *" -x "*\\\#*" -x "*/.*_check" -x "*/.*.swp" -x "*/.pkgdir*"
 
 find_md5=find $(wildcard $(1)) -type f $(patsubst -x,-and -not -path,$(DEP_FINDPARAMS) $(2)) -printf "%p%T@\n" | sort | mkhash md5
+find_md5_reproducible=find $(wildcard $(1)) -type f $(patsubst -x,-and -not -path,$(DEP_FINDPARAMS) $(2)) -print0 | xargs -0 mkhash md5 | sort | mkhash md5
 
 define rdep
   .PRECIOUS: $(2)

include/feeds.mk

@@ -43,5 +43,11 @@ endef
 
 # 1: package name
 define GetABISuffix
-$(if $(filter-out kmod-%,$(1)),$(if $(ABIV_$(1)),$(ABIV_$(1)),$(foreach v,$(wildcard $(STAGING_DIR)/pkginfo/$(1).version),$(shell cat $(v)))))
+$(if $(ABIV_$(1)),$(ABIV_$(1)),$(call FormatABISuffix,$(1),$(foreach v,$(wildcard $(STAGING_DIR)/pkginfo/$(1).version),$(shell cat $(v)))))
+endef
+
+# 1: package name
+# 2: abi version
+define FormatABISuffix
+$(if $(filter-out kmod-%,$(1)),$(if $(2),$(if $(filter %0 %1 %2 %3 %4 %5 %6 %7 %8 %9,$(1)),-)$(2)))
 endef

include/host-build.mk

@@ -21,7 +21,7 @@ include $(INCLUDE_DIR)/depends.mk
 include $(INCLUDE_DIR)/quilt.mk
 
 BUILD_TYPES += host
-HOST_STAMP_PREPARED=$(HOST_BUILD_DIR)/.prepared$(if $(HOST_QUILT)$(DUMP),,$(shell $(call find_md5,${CURDIR} $(PKG_FILE_DEPENDS),))_$(call confvar,CONFIG_AUTOREMOVE $(HOST_PREPARED_DEPENDS)))
+HOST_STAMP_PREPARED=$(HOST_BUILD_DIR)/.prepared$(if $(HOST_QUILT)$(DUMP),,$(shell $(call $(if $(CONFIG_AUTOREMOVE),find_md5_reproducible,find_md5),${CURDIR} $(PKG_FILE_DEPENDS),))_$(call confvar,CONFIG_AUTOREMOVE $(HOST_PREPARED_DEPENDS)))
 HOST_STAMP_CONFIGURED:=$(HOST_BUILD_DIR)/.configured
 HOST_STAMP_BUILT:=$(HOST_BUILD_DIR)/.built
 HOST_BUILD_PREFIX?=$(if $(IS_PACKAGE_BUILD),$(STAGING_DIR_HOSTPKG),$(STAGING_DIR_HOST))
@@ -197,8 +197,8 @@ ifndef DUMP
 
     ifneq ($(CONFIG_AUTOREMOVE),)
       host-compile:
-		$(FIND) $(HOST_BUILD_DIR) -mindepth 1 -maxdepth 1 -not '(' -type f -and -name '.*' -and -size 0 ')' | \
+		$(FIND) $(HOST_BUILD_DIR) -mindepth 1 -maxdepth 1 -not '(' -type f -and -name '.*' -and -size 0 ')' -print0 | \
-			$(XARGS) rm -rf
+			$(XARGS) -0 rm -rf
     endif
   endef
 endif

include/image-commands.mk

@@ -3,6 +3,10 @@
 IMAGE_KERNEL = $(word 1,$^)
 IMAGE_ROOTFS = $(word 2,$^)
 
+define ModelNameLimit16
+$(shell expr substr "$(word 2, $(subst _, ,$(1)))" 1 16)
+endef
+
 define rootfs_align
 $(patsubst %-256k,0x40000,$(patsubst %-128k,0x20000,$(patsubst %-64k,0x10000,$(patsubst squashfs%,0x4,$(patsubst root.%,%,$(1))))))
 endef
@@ -236,8 +240,11 @@ define Build/jffs2
 endef
 
 define Build/kernel2minor
-	kernel2minor -k $@ -r $@.new $(1)
+	$(eval temp_file := $(shell mktemp))
-	mv $@.new $@
+	cp $@ $(temp_file)
+	kernel2minor -k $(temp_file) -r $(temp_file).new $(1)
+	mv $(temp_file).new $@
+	rm -f $(temp_file)
 endef
 
 define Build/kernel-bin

include/image.mk

@@ -419,7 +419,7 @@ DEFAULT_DEVICE_VARS := \
   DEVICE_DTS_CONFIG DEVICE_DTS_DIR DEVICE_FDT_NUM SOC BOARD_NAME \
   UIMAGE_MAGIC UIMAGE_NAME \
   SUPPORTED_DEVICES IMAGE_METADATA KERNEL_ENTRY KERNEL_LOADADDR \
-  UBOOT_PATH IMAGE_SIZE \
+  IMAGE_PREFIX DEVICE_PACKAGES UBOOT_PATH IMAGE_SIZE \
   DEVICE_COMPAT_VERSION DEVICE_COMPAT_MESSAGE \
   DEVICE_VENDOR DEVICE_MODEL DEVICE_VARIANT \
   DEVICE_ALT0_VENDOR DEVICE_ALT0_MODEL DEVICE_ALT0_VARIANT \
@@ -472,7 +472,8 @@ endef
 ifndef IB
 define Device/Build/initramfs
   $(call Device/Export,$(KDIR)/tmp/$$(KERNEL_INITRAMFS_IMAGE),$(1))
-  $$(_TARGET): $$(if $$(KERNEL_INITRAMFS),$(BIN_DIR)/$$(KERNEL_INITRAMFS_IMAGE))
+  $$(_TARGET): $$(if $$(KERNEL_INITRAMFS),$(BIN_DIR)/$$(KERNEL_INITRAMFS_IMAGE) \
+	  $$(if $$(CONFIG_JSON_OVERVIEW_IMAGE_INFO), $(BUILD_DIR)/json_info_files/$$(KERNEL_INITRAMFS_IMAGE).json,))
 
   $(KDIR)/$$(KERNEL_INITRAMFS_NAME):: image_prepare
   $(BIN_DIR)/$$(KERNEL_INITRAMFS_IMAGE): $(KDIR)/tmp/$$(KERNEL_INITRAMFS_IMAGE)
@@ -481,6 +482,38 @@ define Device/Build/initramfs
   $(KDIR)/tmp/$$(KERNEL_INITRAMFS_IMAGE): $(KDIR)/$$(KERNEL_INITRAMFS_NAME) $(CURDIR)/Makefile $$(KERNEL_DEPENDS) image_prepare
 	@rm -f $$@
 	$$(call concat_cmd,$$(KERNEL_INITRAMFS))
+
+  $(call Device/Export,$(BUILD_DIR)/json_info_files/$$(KERNEL_INITRAMFS_IMAGE).json,$(1))
+
+  $(BUILD_DIR)/json_info_files/$$(KERNEL_INITRAMFS_IMAGE).json: $(BIN_DIR)/$$(KERNEL_INITRAMFS_IMAGE)
+	@mkdir -p $$(shell dirname $$@)
+	DEVICE_ID="$(1)" \
+	BIN_DIR="$(BIN_DIR)" \
+	SOURCE_DATE_EPOCH=$(SOURCE_DATE_EPOCH) \
+	IMAGE_NAME="$$(notdir $$^)" \
+	IMAGE_TYPE="kernel" \
+	IMAGE_FILESYSTEM="initramfs" \
+	IMAGE_PREFIX="$$(IMAGE_PREFIX)" \
+	DEVICE_VENDOR="$$(DEVICE_VENDOR)" \
+	DEVICE_MODEL="$$(DEVICE_MODEL)" \
+	DEVICE_VARIANT="$$(DEVICE_VARIANT)" \
+	DEVICE_ALT0_VENDOR="$$(DEVICE_ALT0_VENDOR)" \
+	DEVICE_ALT0_MODEL="$$(DEVICE_ALT0_MODEL)" \
+	DEVICE_ALT0_VARIANT="$$(DEVICE_ALT0_VARIANT)" \
+	DEVICE_ALT1_VENDOR="$$(DEVICE_ALT1_VENDOR)" \
+	DEVICE_ALT1_MODEL="$$(DEVICE_ALT1_MODEL)" \
+	DEVICE_ALT1_VARIANT="$$(DEVICE_ALT1_VARIANT)" \
+	DEVICE_ALT2_VENDOR="$$(DEVICE_ALT2_VENDOR)" \
+	DEVICE_ALT2_MODEL="$$(DEVICE_ALT2_MODEL)" \
+	DEVICE_ALT2_VARIANT="$$(DEVICE_ALT2_VARIANT)" \
+	DEVICE_TITLE="$$(DEVICE_TITLE)" \
+	DEVICE_PACKAGES="$$(DEVICE_PACKAGES)" \
+	TARGET="$(BOARD)" \
+	SUBTARGET="$(if $(SUBTARGET),$(SUBTARGET),generic)" \
+	VERSION_NUMBER="$(VERSION_NUMBER)" \
+	VERSION_CODE="$(VERSION_CODE)" \
+	SUPPORTED_DEVICES="$$(SUPPORTED_DEVICES)" \
+	$(TOPDIR)/scripts/json_add_image_info.py $$@
 endef
 endif
 

include/kernel-5.4

@@ -0,0 +1,2 @@
+LINUX_VERSION-5.4 = .238
+LINUX_KERNEL_HASH-5.4.238 = 70a2b2da85598eba6a73cdc0749e441cbdf3011d9babcb7028a46aa8d98aa91f

include/kernel-build.mk

@@ -10,7 +10,7 @@ ifneq ($(DUMP),1)
 endif
 
 KERNEL_FILE_DEPENDS=$(GENERIC_BACKPORT_DIR) $(GENERIC_PATCH_DIR) $(GENERIC_HACK_DIR) $(PATCH_DIR) $(GENERIC_FILES_DIR) $(FILES_DIR)
-STAMP_PREPARED=$(LINUX_DIR)/.prepared$(if $(QUILT)$(DUMP),,_$(shell $(call find_md5,$(KERNEL_FILE_DEPENDS),)))
+STAMP_PREPARED=$(LINUX_DIR)/.prepared$(if $(QUILT)$(DUMP),,_$(shell $(call $(if $(CONFIG_AUTOREMOVE),find_md5_reproducible,find_md5),$(KERNEL_FILE_DEPENDS),)))
 STAMP_CONFIGURED:=$(LINUX_DIR)/.configured
 include $(INCLUDE_DIR)/download.mk
 include $(INCLUDE_DIR)/quilt.mk

include/kernel-defaults.mk

@@ -43,7 +43,9 @@ else
 		rmdir $(LINUX_DIR); \
 	fi
 	ln -s $(CONFIG_EXTERNAL_KERNEL_TREE) $(LINUX_DIR)
-	$(_SINGLE) [ -d $(LINUX_DIR)/user_headers ] && rm -rf $(LINUX_DIR)/user_headers
+	if [ -d $(LINUX_DIR)/user_headers ]; then \
+		rm -rf $(LINUX_DIR)/user_headers; \
+	fi
   endef
 endif
 

include/kernel-version.mk

@@ -6,9 +6,12 @@ ifdef CONFIG_TESTING_KERNEL
   KERNEL_PATCHVER:=$(KERNEL_TESTING_PATCHVER)
 endif
 
-LINUX_VERSION-5.4 = .98
+KERNEL_DETAILS_FILE=$(INCLUDE_DIR)/kernel-$(KERNEL_PATCHVER)
+ifeq ($(wildcard $(KERNEL_DETAILS_FILE)),)
+  $(error Missing kernel version/hash file for $(KERNEL_PATCHVER). Please create $(KERNEL_DETAILS_FILE))
+endif
 
-LINUX_KERNEL_HASH-5.4.98 = 83a248d6fbe388f133769d736f36b754767abc9d66f1c034b537ad778fbd46b1
+include $(KERNEL_DETAILS_FILE)
 
 remove_uri_prefix=$(subst git://,,$(subst http://,,$(subst https://,,$(1))))
 sanitize_uri=$(call qstrip,$(subst @,_,$(subst :,_,$(subst .,_,$(subst -,_,$(subst /,_,$(1)))))))

include/kernel.mk

@@ -101,7 +101,7 @@ endif
 KERNEL_MAKE = $(MAKE) $(KERNEL_MAKEOPTS)
 
 KERNEL_MAKE_FLAGS = \
-	KCFLAGS="$(call iremap,$(BUILD_DIR),$(notdir $(BUILD_DIR)))" \
+	KCFLAGS="$(call iremap,$(BUILD_DIR),$(notdir $(BUILD_DIR))) $(filter-out -fno-plt,$(call qstrip,$(CONFIG_EXTRA_OPTIMIZATION))) $(call qstrip,$(CONFIG_KERNEL_CFLAGS))" \
 	HOSTCFLAGS="$(HOST_CFLAGS) -Wall -Wmissing-prototypes -Wstrict-prototypes" \
 	CROSS_COMPILE="$(KERNEL_CROSS)" \
 	ARCH="$(LINUX_KARCH)" \
@@ -118,6 +118,9 @@ KERNEL_MAKE_FLAGS = \
 	cmd_syscalls= \
 	$(if $(__package_mk),KBUILD_EXTRA_SYMBOLS="$(wildcard $(PKG_SYMVERS_DIR)/*.symvers)")
 
+KERNEL_NOSTDINC_FLAGS = \
+	-nostdinc $(if $(DUMP),, -isystem $(shell $(TARGET_CC) -print-file-name=include))
+
 ifeq ($(call qstrip,$(CONFIG_EXTERNAL_KERNEL_TREE))$(call qstrip,$(CONFIG_KERNEL_GIT_CLONE_URI)),)
   KERNEL_MAKE_FLAGS += \
 	KERNELRELEASE=$(LINUX_VERSION)

include/netfilter.mk

@@ -64,9 +64,7 @@ $(eval $(if $(NF_KMOD),,$(call nf_add,IPT_CORE,CONFIG_NETFILTER_XT_MARK, $(P_XT)
 
 # kernel only
 $(eval $(if $(NF_KMOD),$(call nf_add,NF_CONNTRACK,CONFIG_NF_CONNTRACK, $(P_XT)nf_conntrack),))
-$(eval $(if $(NF_KMOD),$(call nf_add,NF_CONNTRACK,CONFIG_NF_CONNTRACK_RTCACHE, $(P_XT)nf_conntrack_rtcache),))
 $(eval $(if $(NF_KMOD),$(call nf_add,NF_CONNTRACK,CONFIG_NF_DEFRAG_IPV4, $(P_V4)nf_defrag_ipv4),))
-$(eval $(if $(NF_KMOD),$(call nf_add,NF_CONNTRACK,CONFIG_NF_CONNTRACK_IPV4, $(P_V4)nf_conntrack_ipv4),))
 
 $(eval $(call nf_add,IPT_CONNTRACK,CONFIG_NETFILTER_XT_MATCH_STATE, $(P_XT)xt_state))
 $(eval $(call nf_add,IPT_CONNTRACK,CONFIG_NETFILTER_XT_TARGET_CT, $(P_XT)xt_CT))
@@ -119,7 +117,6 @@ $(eval $(call nf_add,IPT_IPOPT,CONFIG_NETFILTER_XT_MATCH_STATISTIC, $(P_XT)xt_st
 $(eval $(call nf_add,IPT_IPOPT,CONFIG_NETFILTER_XT_MATCH_TCPMSS, $(P_XT)xt_tcpmss))
 
 $(eval $(call nf_add,IPT_IPOPT,CONFIG_NETFILTER_XT_TARGET_CLASSIFY, $(P_XT)xt_CLASSIFY))
-$(eval $(call nf_add,IPT_IPOPT,CONFIG_IP_NF_MATCH_DSCP, $(P_V4)ipt_dscp))
 $(eval $(call nf_add,IPT_IPOPT,CONFIG_IP_NF_TARGET_ECN, $(P_V4)ipt_ECN))
 
 $(eval $(call nf_add,IPT_IPOPT,CONFIG_NETFILTER_XT_MATCH_ECN, $(P_XT)xt_ecn))
@@ -155,17 +152,14 @@ $(eval $(if $(NF_KMOD),$(call nf_add,NF_REJECT6,CONFIG_NF_REJECT_IPV6, $(P_V6)nf
 $(eval $(if $(NF_KMOD),$(call nf_add,NF_IPT6,CONFIG_IP6_NF_IPTABLES, $(P_V6)ip6_tables),))
 
 $(eval $(if $(NF_KMOD),$(call nf_add,NF_CONNTRACK,CONFIG_NF_DEFRAG_IPV6, $(P_V6)nf_defrag_ipv6),))
-$(eval $(if $(NF_KMOD),$(call nf_add,NF_CONNTRACK6,CONFIG_NF_CONNTRACK_IPV6, $(P_V6)nf_conntrack_ipv6),))
 
 $(eval $(if $(NF_KMOD),$(call nf_add,IPT_IPV6,CONFIG_IP6_NF_FILTER, $(P_V6)ip6table_filter),))
 $(eval $(if $(NF_KMOD),$(call nf_add,IPT_IPV6,CONFIG_IP6_NF_MANGLE, $(P_V6)ip6table_mangle),))
-$(eval $(if $(NF_KMOD),$(call nf_add,IPT_IPV6,CONFIG_IP6_NF_QUEUE, $(P_V6)ip6_queue),))
 $(eval $(if $(NF_KMOD),$(call nf_add,IPT_IPV6,CONFIG_NF_LOG_IPV6, $(P_V6)nf_log_ipv6),))
 
 $(eval $(if $(NF_KMOD),,$(call nf_add,IPT_IPV6,CONFIG_IP6_NF_IPTABLES, ip6t_icmp6)))
 
 
-$(eval $(call nf_add,IPT_IPV6,CONFIG_IP6_NF_TARGET_LOG, $(P_V6)ip6t_LOG))
 $(eval $(call nf_add,IPT_IPV6,CONFIG_IP6_NF_TARGET_REJECT, $(P_V6)ip6t_REJECT))
 
 # ipv6 extra
@@ -225,11 +219,6 @@ $(eval $(call nf_add,NF_NATHELPER_EXTRA,CONFIG_NF_CONNTRACK_IRC, $(P_XT)nf_connt
 $(eval $(call nf_add,NF_NATHELPER_EXTRA,CONFIG_NF_NAT_IRC, $(P_XT)nf_nat_irc))
 
 
-# ulog
-
-$(eval $(call nf_add,IPT_ULOG,CONFIG_IP_NF_TARGET_ULOG, $(P_V4)ipt_ULOG))
-
-
 # nflog
 
 $(eval $(call nf_add,IPT_NFLOG,CONFIG_NETFILTER_XT_TARGET_NFLOG, $(P_XT)xt_NFLOG))
@@ -315,7 +304,6 @@ $(eval $(call nf_add,EBTABLES_IP4,CONFIG_BRIDGE_EBT_SNAT, $(P_EBT)ebt_snat))
 
 # watchers
 $(eval $(call nf_add,EBTABLES_WATCHERS,CONFIG_BRIDGE_EBT_LOG, $(P_EBT)ebt_log))
-$(eval $(call nf_add,EBTABLES_WATCHERS,CONFIG_BRIDGE_EBT_ULOG, $(P_EBT)ebt_ulog))
 $(eval $(call nf_add,EBTABLES_WATCHERS,CONFIG_BRIDGE_EBT_NFLOG, $(P_EBT)ebt_nflog))
 $(eval $(call nf_add,EBTABLES_WATCHERS,CONFIG_BRIDGE_EBT_NFQUEUE, $(P_EBT)ebt_nfqueue))
 
@@ -378,7 +366,6 @@ IPT_BUILTIN += $(IPT_NAT6-y)
 IPT_BUILTIN += $(IPT_NAT_EXTRA-y)
 IPT_BUILTIN += $(NF_NATHELPER-y)
 IPT_BUILTIN += $(NF_NATHELPER_EXTRA-y)
-IPT_BUILTIN += $(IPT_ULOG-y)
 IPT_BUILTIN += $(IPT_TPROXY-y)
 IPT_BUILTIN += $(NFNETLINK-y)
 IPT_BUILTIN += $(NFNETLINK_LOG-y)

include/package-ipkg.mk

@@ -99,7 +99,7 @@ _endef=endef
 
 ifeq ($(DUMP),)
   define BuildTarget/ipkg
-    ABIV_$(1):=$(if $(filter-out kmod-%,$(1)),$(ABI_VERSION))
+    ABIV_$(1):=$(call FormatABISuffix,$(1),$(ABI_VERSION))
     PDIR_$(1):=$(call FeedPackageDir,$(1))
     IPKG_$(1):=$$(PDIR_$(1))/$(1)$$(ABIV_$(1))_$(VERSION)_$(PKGARCH).ipk
     IDIR_$(1):=$(PKG_BUILD_DIR)/ipkg-$(PKGARCH)/$(1)
@@ -175,7 +175,7 @@ Package: $(1)$$(ABIV_$(1))
 Version: $(VERSION)
 $$(call addfield,Depends,$$(Package/$(1)/DEPENDS)
 )$$(call addfield,Conflicts,$$(call mergelist,$(CONFLICTS))
-)$$(call addfield,Provides,$$(call mergelist,$$(filter-out $(1)$$(ABIV_$(1)),$(PROVIDES)$$(if $$(ABIV_$(1)), $(1) $(foreach provide,$(PROVIDES),$(provide)$$(call GetABISuffix,$(provide))))))
+)$$(call addfield,Provides,$$(call mergelist,$$(filter-out $(1)$$(ABIV_$(1)),$(PROVIDES)$$(if $$(ABIV_$(1)), $(1) $(foreach provide,$(PROVIDES),$(provide)$$(ABIV_$(1))))))
 )$$(call addfield,Alternatives,$$(call mergelist,$(ALTERNATIVES))
 )$$(call addfield,Source,$(SOURCE)
 )$$(call addfield,SourceName,$(1)
@@ -184,6 +184,7 @@ $$(call addfield,Depends,$$(Package/$(1)/DEPENDS)
 )$$(call addfield,Section,$(SECTION)
 )$$(call addfield,Require-User,$(USERID)
 )$$(call addfield,SourceDateEpoch,$(PKG_SOURCE_DATE_EPOCH)
+)$$(if $$(ABIV_$(1)),ABIVersion: $$(ABIV_$(1))
 )$(if $(PKG_CPE_ID),CPE-ID: $(PKG_CPE_ID)
 )$(if $(filter hold,$(PKG_FLAGS)),Status: unknown hold not-installed
 )$(if $(filter essential,$(PKG_FLAGS)),Essential: yes

include/package.mk

@@ -84,7 +84,7 @@ ifneq ($(PREV_STAMP_PREPARED),)
   STAMP_PREPARED:=$(PREV_STAMP_PREPARED)
   CONFIG_AUTOREBUILD:=
 else
-  STAMP_PREPARED=$(PKG_BUILD_DIR)/.prepared$(if $(QUILT)$(DUMP),,_$(shell $(call find_md5,${CURDIR} $(PKG_FILE_DEPENDS),))_$(call confvar,CONFIG_AUTOREMOVE $(PKG_PREPARED_DEPENDS)))
+  STAMP_PREPARED=$(PKG_BUILD_DIR)/.prepared$(if $(QUILT)$(DUMP),,_$(shell $(call $(if $(CONFIG_AUTOREMOVE),find_md5_reproducible,find_md5),${CURDIR} $(PKG_FILE_DEPENDS),))_$(call confvar,CONFIG_AUTOREMOVE $(PKG_PREPARED_DEPENDS)))
 endif
 STAMP_CONFIGURED=$(PKG_BUILD_DIR)/.configured$(if $(DUMP),,_$(call confvar,$(PKG_CONFIG_DEPENDS)))
 STAMP_CONFIGURED_WILDCARD=$(PKG_BUILD_DIR)/.configured_*
@@ -258,8 +258,8 @@ define Build/CoreTargets
   ifneq ($(CONFIG_AUTOREMOVE),)
     compile:
 		-touch -r $(PKG_BUILD_DIR)/.built $(PKG_BUILD_DIR)/.autoremove 2>/dev/null >/dev/null
-		$(FIND) $(PKG_BUILD_DIR) -mindepth 1 -maxdepth 1 -not '(' -type f -and -name '.*' -and -size 0 ')' -and -not -name '.pkgdir' | \
+		$(FIND) $(PKG_BUILD_DIR) -mindepth 1 -maxdepth 1 -not '(' -type f -and -name '.*' -and -size 0 ')' -and -not -name '.pkgdir'  -print0 | \
-			$(XARGS) rm -rf
+			$(XARGS) -0 rm -rf
   endif
 endef
 

include/prereq-build.mk

@@ -26,8 +26,8 @@ $(eval $(call TestHostCommand,proper-umask, \
 ifndef IB
 $(eval $(call SetupHostCommand,gcc, \
 	Please install the GNU C Compiler (gcc) 4.8 or later, \
-	$(CC) -dumpversion | grep -E '^(4\.[8-9]|[5-9]\.?|10\.?)', \
+	$(CC) -dumpversion | grep -E '^(4\.[8-9]|[5-9]\.?|1[0-9]\.?)', \
-	gcc -dumpversion | grep -E '^(4\.[8-9]|[5-9]\.?|10\.?)', \
+	gcc -dumpversion | grep -E '^(4\.[8-9]|[5-9]\.?|1[0-9]\.?)', \
 	gcc --version | grep -E 'Apple.(LLVM|clang)' ))
 
 $(eval $(call TestHostCommand,working-gcc, \
@@ -38,8 +38,8 @@ $(eval $(call TestHostCommand,working-gcc, \
 
 $(eval $(call SetupHostCommand,g++, \
 	Please install the GNU C++ Compiler (g++) 4.8 or later, \
-	$(CXX) -dumpversion | grep -E '^(4\.[8-9]|[5-9]\.?|10\.?)', \
+	$(CXX) -dumpversion | grep -E '^(4\.[8-9]|[5-9]\.?|1[0-9]\.?)', \
-	g++ -dumpversion | grep -E '^(4\.[8-9]|[5-9]\.?|10\.?)', \
+	g++ -dumpversion | grep -E '^(4\.[8-9]|[5-9]\.?|1[0-9]\.?)', \
 	g++ --version | grep -E 'Apple.(LLVM|clang)' ))
 
 $(eval $(call TestHostCommand,working-g++, \
@@ -65,11 +65,22 @@ $(eval $(call TestHostCommand,perl-data-dumper, \
 	Please install the Perl Data::Dumper module, \
 	perl -MData::Dumper -e 1))
 
+$(eval $(call TestHostCommand,perl-findbin, \
+	Please install the Perl FindBin module, \
+	perl -MFindBin -e 1))
+
+$(eval $(call TestHostCommand,perl-file-copy, \
+	Please install the Perl File::Copy module, \
+	perl -MFile::Copy -e 1))
+
+$(eval $(call TestHostCommand,perl-file-compare, \
+	Please install the Perl File::Compare module, \
+	perl -MFile::Compare -e 1))
+
 $(eval $(call TestHostCommand,perl-thread-queue, \
 	Please install the Perl Thread::Queue module, \
 	perl -MThread::Queue -e 1))
 
-
 $(eval $(call SetupHostCommand,tar,Please install GNU 'tar', \
 	gtar --version 2>&1 | grep GNU, \
 	gnutar --version 2>&1 | grep GNU, \
@@ -142,20 +153,28 @@ $(eval $(call SetupHostCommand,perl,Please install Perl 5.x, \
 $(eval $(call CleanupPython2))
 
 $(eval $(call SetupHostCommand,python,Please install Python >= 3.5, \
+	python3.11 -V 2>&1 | grep 'Python 3', \
+	python3.10 -V 2>&1 | grep 'Python 3', \
 	python3.9 -V 2>&1 | grep 'Python 3', \
 	python3.8 -V 2>&1 | grep 'Python 3', \
 	python3.7 -V 2>&1 | grep 'Python 3', \
 	python3.6 -V 2>&1 | grep 'Python 3', \
 	python3.5 -V 2>&1 | grep 'Python 3', \
-	python3 -V 2>&1 | grep -E 'Python 3\.[5-9]\.?'))
+	python3 -V 2>&1 | grep -E 'Python 3\.([5-9]|[0-9][0-9])\.?'))
 
 $(eval $(call SetupHostCommand,python3,Please install Python >= 3.5, \
+	python3.11 -V 2>&1 | grep 'Python 3', \
+	python3.10 -V 2>&1 | grep 'Python 3', \
 	python3.9 -V 2>&1 | grep 'Python 3', \
 	python3.8 -V 2>&1 | grep 'Python 3', \
 	python3.7 -V 2>&1 | grep 'Python 3', \
 	python3.6 -V 2>&1 | grep 'Python 3', \
 	python3.5 -V 2>&1 | grep 'Python 3', \
-	python3 -V 2>&1 | grep -E 'Python 3\.[5-9]\.?'))
+	python3 -V 2>&1 | grep -E 'Python 3\.([5-9]|[0-9][0-9])\.?'))
+
+$(eval $(call TestHostCommand,python3-distutils, \
+	Please install the Python3 distutils module, \
+	$(STAGING_DIR_HOST)/bin/python3 -c 'import distutils'))
 
 $(eval $(call SetupHostCommand,git,Please install Git (git-core) >= 1.7.12.2, \
 	git --exec-path | xargs -I % -- grep -q -- --recursive %/git-submodule))
@@ -166,13 +185,20 @@ $(eval $(call SetupHostCommand,file,Please install the 'file' package, \
 $(eval $(call SetupHostCommand,rsync,Please install 'rsync', \
 	rsync --version </dev/null))
 
+$(eval $(call SetupHostCommand,which,Please install 'which', \
+	/usr/bin/which which, \
+	/bin/which which, \
+	which which))
+
 $(STAGING_DIR_HOST)/bin/mkhash: $(SCRIPT_DIR)/mkhash.c
 	mkdir -p $(dir $@)
 	$(CC) -O2 -I$(TOPDIR)/tools/include -o $@ $<
 
-prereq: $(STAGING_DIR_HOST)/bin/mkhash
+$(STAGING_DIR_HOST)/bin/xxd: $(SCRIPT_DIR)/xxdi.pl
+	$(LN) $< $@
+
+prereq: $(STAGING_DIR_HOST)/bin/mkhash $(STAGING_DIR_HOST)/bin/xxd
 
 # Install ldconfig stub
 $(eval $(call TestHostCommand,ldconfig-stub,Failed to install stub, \
-	touch $(STAGING_DIR_HOST)/bin/ldconfig && \
+	$(LN) /bin/true $(STAGING_DIR_HOST)/bin/ldconfig))
-	chmod +x $(STAGING_DIR_HOST)/bin/ldconfig))

include/prereq.mk

@@ -49,7 +49,7 @@ endef
 
 define RequireCommand
   define Require/$(1)
-    command -pv $(1)
+    which $(1)
   endef
 
   $$(eval $$(call Require,$(1),$(2)))
@@ -103,7 +103,7 @@ define SetupHostCommand
 	           $(call QuoteHostCommand,$(11)) $(call QuoteHostCommand,$(12)); do \
 		if [ -n "$$$$$$$$cmd" ]; then \
 			bin="$$$$$$$$(PATH="$(subst $(space),:,$(filter-out $(STAGING_DIR_HOST)/%,$(subst :,$(space),$(PATH))))" \
-				command -pv "$$$$$$$${cmd%% *}")"; \
+				which "$$$$$$$${cmd%% *}")"; \
 			if [ -x "$$$$$$$$bin" ] && eval "$$$$$$$$cmd" >/dev/null 2>/dev/null; then \
 				mkdir -p "$(STAGING_DIR_HOST)/bin"; \
 				ln -sf "$$$$$$$$bin" "$(STAGING_DIR_HOST)/bin/$(strip $(1))"; \

include/u-boot.mk

@@ -44,6 +44,7 @@ TARGET_DEP = TARGET_$(BUILD_TARGET)$(if $(BUILD_SUBTARGET),_$(BUILD_SUBTARGET))
 UBOOT_MAKE_FLAGS = \
 	HOSTCC="$(HOSTCC)" \
 	HOSTCFLAGS="$(HOST_CFLAGS) $(HOST_CPPFLAGS) -std=gnu11" \
+	LOCALVERSION="-OpenWrt-$(REVISION)" \
 	HOSTLDFLAGS="$(HOST_LDFLAGS)"
 
 define Build/U-Boot/Target

include/version.mk

@@ -23,13 +23,13 @@ PKG_CONFIG_DEPENDS += \
 sanitize = $(call tolower,$(subst _,-,$(subst $(space),-,$(1))))
 
 VERSION_NUMBER:=$(call qstrip,$(CONFIG_VERSION_NUMBER))
-VERSION_NUMBER:=$(if $(VERSION_NUMBER),$(VERSION_NUMBER),SNAPSHOT)
+VERSION_NUMBER:=$(if $(VERSION_NUMBER),$(VERSION_NUMBER),21.02-SNAPSHOT)
 
 VERSION_CODE:=$(call qstrip,$(CONFIG_VERSION_CODE))
 VERSION_CODE:=$(if $(VERSION_CODE),$(VERSION_CODE),$(REVISION))
 
 VERSION_REPO:=$(call qstrip,$(CONFIG_VERSION_REPO))
-VERSION_REPO:=$(if $(VERSION_REPO),$(VERSION_REPO),https://downloads.openwrt.org/snapshots)
+VERSION_REPO:=$(if $(VERSION_REPO),$(VERSION_REPO),https://downloads.openwrt.org/releases/21.02-SNAPSHOT)
 
 VERSION_DIST:=$(call qstrip,$(CONFIG_VERSION_DIST))
 VERSION_DIST:=$(if $(VERSION_DIST),$(VERSION_DIST),OpenWrt)

package/Makefile

@@ -66,8 +66,10 @@ $(curdir)/install: $(TMP_DIR)/.build $(curdir)/merge $(if $(CONFIG_TARGET_PER_DE
 	- find $(STAGING_DIR_ROOT) -type d | $(XARGS) chmod 0755
 	rm -rf $(TARGET_DIR) $(TARGET_DIR_ORIG)
 	mkdir -p $(TARGET_DIR)/tmp
-	$(call opkg,$(TARGET_DIR)) install \
+	$(file >$(TMP_DIR)/opkg_install_list,\
-		$(call opkg_package_files,$(foreach pkg,$(shell cat $(PACKAGE_INSTALL_FILES) 2>/dev/null),$(pkg)$(call GetABISuffix,$(pkg))))
+	  $(call opkg_package_files,\
+	    $(foreach pkg,$(shell cat $(PACKAGE_INSTALL_FILES) 2>/dev/null),$(pkg)$(call GetABISuffix,$(pkg)))))
+	$(call opkg,$(TARGET_DIR)) install $$(cat $(TMP_DIR)/opkg_install_list)
 	@for file in $(PACKAGE_INSTALL_FILES); do \
 		[ -s $$file.flags ] || continue; \
 		for flag in `cat $$file.flags`; do \
@@ -90,6 +92,10 @@ $(curdir)/index: FORCE
 			$(call ERROR_MESSAGE,WARNING: Applying padding in $$d/Packages to workaround usign SHA-512 bug!); \
 			{ echo ""; echo ""; } >> Packages;; \
 		esac; \
+		echo -n '{"architecture": "$(ARCH_PACKAGES)", "packages":{' > index.json; \
+		sed -n -e 's/^Package: \(.*\)$$/"\1":/p' -e 's/^Version: \(.*\)$$/"\1",/p' Packages | tr '\n' ' ' >> index.json; \
+		echo '}}' >> index.json; \
+		sed -i 's/, }}/}}/' index.json; \
 		gzip -9nc Packages > Packages.gz; \
 	); done
 ifdef CONFIG_SIGNED_PACKAGES

package/base-files/files/bin/config_generate

@@ -40,7 +40,7 @@ generate_static_network() {
 	uci -q batch <<-EOF
 		delete network.loopback
 		set network.loopback='interface'
-		set network.loopback.ifname='lo'
+		set network.loopback.device='lo'
 		set network.loopback.proto='static'
 		set network.loopback.ipaddr='127.0.0.1'
 		set network.loopback.netmask='255.0.0.0'
@@ -91,51 +91,73 @@ generate_static_network() {
 
 addr_offset=2
 generate_network() {
-	local ifname macaddr protocol type ipaddr netmask vlan
+	local ports device macaddr protocol type ipaddr netmask vlan
 	local bridge=$2
 
 	json_select network
 		json_select "$1"
-			json_get_vars ifname macaddr protocol ipaddr netmask vlan
+			json_get_vars device macaddr metric protocol ipaddr netmask vlan
+			json_get_values ports ports
 		json_select ..
 	json_select ..
 
-	[ -n "$ifname" ] || return
+	[ -n "$device" -o -n "$ports" ] || return
 
-	# force bridge for multi-interface devices (and lan)
+	# Force bridge for "lan" as it may have other devices (e.g. wireless)
-	case "$1:$ifname" in
+	# bridged
-		*\ * | lan:*) type="bridge" ;;
+	[ "$1" = "lan" -a -z "$ports" ] && {
-	esac
+		ports="$device"
+	}
+
+	[ -n "$ports" -a -z "$bridge" ] && {
+		uci -q batch <<-EOF
+			add network device
+			set network.@device[-1].name='br-$1'
+			set network.@device[-1].type='bridge'
+		EOF
+		for port in $ports; do uci add_list network.@device[-1].ports="$port"; done
+		[ -n "$macaddr" ] && {
+			for port in $ports; do
+				uci -q batch <<-EOF
+					add network device
+					set network.@device[-1].name='$port'
+					set network.@device[-1].macaddr='$macaddr'
+				EOF
+			done
+		}
+		device=br-$1
+		type=
+		macaddr=""
+	}
 
 	[ -n "$bridge" ] && {
+		[ -z "$ports" ] && ports="$device"
 		if [ -z "$vlan" ]; then
 			bridge_vlan_id=$((bridge_vlan_id + 1))
 			vlan=$bridge_vlan_id
 		fi
-		generate_bridge_vlan $1 $bridge "$ifname" $vlan
+		generate_bridge_vlan $1 $bridge "$ports" $vlan
-		ifname=$bridge.$vlan
+		device=$bridge.$vlan
 		type=""
 	}
 
+	if [ -n "$macaddr" ]; then
+		uci -q batch <<-EOF
+			add network device
+			set network.@device[-1].name='$device'
+			set network.@device[-1].macaddr='$macaddr'
+		EOF
+	fi
+
 	uci -q batch <<-EOF
 		delete network.$1
 		set network.$1='interface'
 		set network.$1.type='$type'
-		set network.$1.ifname='$ifname'
+		set network.$1.device='$device'
+		set network.$1.metric='$metric'
 		set network.$1.proto='none'
 	EOF
 
-	if [ -n "$macaddr" ]; then
-		for name in $ifname; do
-			uci -q batch <<-EOF
-				delete network.$1_${name/./_}_dev
-				set network.$1_${name/./_}_dev='device'
-				set network.$1_${name/./_}_dev.name='$name'
-				set network.$1_${name/./_}_dev.macaddr='$macaddr'
-			EOF
-		done
-	fi
-
 	case "$protocol" in
 		static)
 			local ipad
@@ -156,14 +178,14 @@ generate_network() {
 
 		dhcp)
 			# fixup IPv6 slave interface if parent is a bridge
-			[ "$type" = "bridge" ] && ifname="br-$1"
+			[ "$type" = "bridge" ] && device="br-$1"
 
 			uci set network.$1.proto='dhcp'
 			[ -e /proc/sys/net/ipv6 ] && {
 				uci -q batch <<-EOF
 					delete network.${1}6
 					set network.${1}6='interface'
-					set network.${1}6.ifname='$ifname'
+					set network.${1}6.device='$device'
 					set network.${1}6.proto='dhcpv6'
 				EOF
 			}
@@ -180,7 +202,7 @@ generate_network() {
 					set network.$1.ipv6='1'
 					delete network.${1}6
 					set network.${1}6='interface'
-					set network.${1}6.ifname='@${1}'
+					set network.${1}6.device='@${1}'
 					set network.${1}6.proto='dhcpv6'
 				EOF
 			}

package/base-files/files/etc/init.d/boot

@@ -21,9 +21,10 @@ boot() {
 	[ -f /proc/mounts ] || /sbin/mount_root
 	[ -f /proc/jffs2_bbc ] && echo "S" > /proc/jffs2_bbc
 
-	mkdir -p /var/run
-	mkdir -p /var/log
 	mkdir -p /var/lock
+	chmod 1777 /var/lock
+	mkdir -p /var/log
+	mkdir -p /var/run
 	mkdir -p /var/state
 	mkdir -p /var/tmp
 	mkdir -p /tmp/.uci
@@ -47,6 +48,7 @@ boot() {
 
 	/bin/config_generate
 	uci_apply_defaults
+	sync
 	
 	# temporary hack until configd exists
 	/sbin/reload_config

package/base-files/files/etc/init.d/system

@@ -4,8 +4,7 @@
 START=10
 USE_PROCD=1
 
-validate_system_section()
+validate_system_section() {
-{
 	uci_load_validate system system "$1" "$2" \
 		'hostname:string:OpenWrt' \
 		'conloglevel:uinteger' \
@@ -23,8 +22,9 @@ system_config() {
 	echo "$hostname" > /proc/sys/kernel/hostname
 	[ -z "$conloglevel" -a -z "$buffersize" ] || dmesg ${conloglevel:+-n $conloglevel} ${buffersize:+-s $buffersize}
 	echo "$timezone" > /tmp/TZ
-	[ -n "$zonename" ] && [ -f "/usr/share/zoneinfo/$zonename" ] && \
+	[ -n "$zonename" ] && [ -f "/usr/share/zoneinfo/${zonename// /_}" ] \
-		ln -sf "/usr/share/zoneinfo/$zonename" /tmp/localtime && rm -f /tmp/TZ
+		&& ln -sf "/usr/share/zoneinfo/${zonename// /_}" /tmp/localtime \
+		&& rm -f /tmp/TZ
 
 	# apply timezone to kernel
 	hwclock -u --systz
@@ -35,8 +35,7 @@ reload_service() {
 	config_foreach validate_system_section system system_config
 }
 
-service_triggers()
+service_triggers() {
-{
 	procd_add_reload_trigger "system"
 	procd_add_validation validate_system_section
 }

package/base-files/files/etc/rc.common

@@ -100,9 +100,9 @@ service_data() {
 }
 
 service_running() {
-	local service="${1:-$(basename $initscript)}"
+	local instance="${1:-*}"
-	local instance="${2:-*}"
+
-	procd_running "$service" "$instance" "$@"
+	procd_running "$(basename $initscript)" "$instance"
 }
 
 ${INIT_TRACE:+set -x}

package/base-files/files/etc/shinit

@@ -22,7 +22,7 @@ service() {
 			printf "%-30s\t%10s\t%10s\n"  "$F" \
 			$( $($F enabled) && echo "enabled" || echo "disabled" ) \
 			$( [ "$(ubus call service list "{ 'verbose': true, 'name': '$(basename $F)' }" \
-			| jsonfilter -q -e "@.$(basename $F).instances[*].running")" = "true" ] \
+			| jsonfilter -q -e "@['$(basename $F)'].instances[*].running" | uniq)" = "true" ] \
 			&& echo "running" || echo "stopped" )
 		done;
 		return 1

package/base-files/files/lib/functions/uci-defaults.sh

@@ -39,7 +39,13 @@ ucidef_set_interface() {
 
 		[ -n "$opt" -a -n "$val" ] || break
 
-		json_add_string "$opt" "$val"
+		[ "$opt" = "device" -a "$val" != "${val/ //}" ] && {
+			json_select_array "ports"
+			for e in $val; do json_add_string "" "$e"; done
+			json_close_array
+		} || {
+			json_add_string "$opt" "$val"
+		}
 	done
 
 	if ! json_is_a protocol string; then
@@ -73,11 +79,11 @@ ucidef_set_compat_version() {
 }
 
 ucidef_set_interface_lan() {
-	ucidef_set_interface "lan" ifname "$1" protocol "${2:-static}"
+	ucidef_set_interface "lan" device "$1" protocol "${2:-static}"
 }
 
 ucidef_set_interface_wan() {
-	ucidef_set_interface "wan" ifname "$1" protocol "${2:-dhcp}"
+	ucidef_set_interface "wan" device "$1" protocol "${2:-dhcp}"
 }
 
 ucidef_set_interfaces_lan_wan() {
@@ -195,14 +201,14 @@ _ucidef_finish_switch_roles() {
 
 			json_select_object "$role"
 				# attach previous interfaces (for multi-switch devices)
-				json_get_var devices ifname
+				json_get_var devices device
 				if ! list_contains devices "$device"; then
 					devices="${devices:+$devices }$device"
 				fi
 			json_select ..
 		json_select ..
 
-		ucidef_set_interface "$role" ifname "$devices"
+		ucidef_set_interface "$role" device "$devices"
 	done
 }
 
@@ -412,6 +418,15 @@ ucidef_set_led_default() {
 	json_select ..
 }
 
+ucidef_set_led_heartbeat() {
+	_ucidef_set_led_common "$1" "$2" "$3"
+
+	json_add_string trigger heartbeat
+	json_select ..
+
+	json_select ..
+}
+
 ucidef_set_led_gpio() {
 	local gpio="$4"
 	local inverted="$5"

package/base-files/files/lib/preinit/10_indicate_preinit

@@ -72,14 +72,20 @@ preinit_config_board() {
 
 	json_select network
 		json_select "lan"
-			json_get_vars ifname
+			json_get_vars device
+			json_get_values ports ports
 		json_select ..
 	json_select ..
 
-	[ -n "$ifname" ] || return
+	[ -n "$device" -o -n "$ports" ] || return
+
+	# swconfig uses $device and DSA uses ports
+	[ -z "$ports" ] && {
+		ports="$device"
+	}
 
 	# only use the first one
-	ifname=${ifname%% *}
+	ifname=${ports%% *}
 
 	if [ -x /sbin/swconfig ]; then
 		# configure the switch, if present
@@ -91,6 +97,8 @@ preinit_config_board() {
 	else
 		# trim any vlan ids
 		ifname=${ifname%\.*}
+		# trim any vlan modifiers like :t
+		ifname=${ifname%\:*}
 	fi
 
 	pi_ifname=$ifname

package/base-files/files/lib/upgrade/common.sh

@@ -267,7 +267,7 @@ get_partitions() { # <device> <filename>
 				local type="$1"
 				local lba="$(( $(hex_le32_to_cpu $4) * 0x100000000 + $(hex_le32_to_cpu $3) ))"
 				local end="$(( $(hex_le32_to_cpu $6) * 0x100000000 + $(hex_le32_to_cpu $5) ))"
-				local num="$(( $end - $lba ))"
+				local num="$(( $end - $lba + 1 ))"
 
 				[ "$type" = "00000000000000000000000000000000" ] && continue
 

package/base-files/files/sbin/sysupgrade

@@ -287,6 +287,7 @@ if [ -n "$CONF_RESTORE" ]; then
 	fi
 
 	[ "$VERBOSE" -gt 1 ] && TAR_V="v" || TAR_V=""
+	v "Restoring config files..."
 	tar -C / -x${TAR_V}zf "$CONF_RESTORE"
 	exit $?
 fi

package/base-files/files/sbin/wifi

@@ -130,10 +130,12 @@ wifi_updown() {
 		ubus_wifi_cmd "$cmd" "$2"
 		scan_wifi
 		cmd=up
+		ubus call network reload
 	}
 	[ reconf = "$1" ] && {
 		scan_wifi
 		cmd=reconf
+		ubus call network reload
 	}
 	ubus_wifi_cmd "$cmd" "$2"
 	_wifi_updown "$@"
@@ -246,7 +248,7 @@ case "$1" in
 	reload) wifi_reload "$2";;
 	reload_legacy) wifi_reload_legacy "$2";;
 	--help|help) usage;;
-	reconf) ubus call network reload; wifi_updown "reconf" "$2";;
+	reconf) wifi_updown "reconf" "$2";;
-	''|up) ubus call network reload; wifi_updown "enable" "$2";;
+	''|up) wifi_updown "enable" "$2";;
 	*) usage; exit 1;;
 esac

package/base-files/image-config.in

@@ -183,7 +183,7 @@ if VERSIONOPT
 	config VERSION_REPO
 		string
 		prompt "Release repository"
-		default "https://downloads.openwrt.org/snapshots"
+		default "https://downloads.openwrt.org/releases/21.02-SNAPSHOT"
 		help
 			This is the repository address embedded in the image, it defaults
 			to the trunk snapshot repo; the url may contain the following placeholders:

package/boot/arm-trusted-firmware-bcm63xx/Makefile

@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: GPL-2.0
+
+include $(TOPDIR)/rules.mk
+
+PKG_VERSION:=2.2
+PKG_RELEASE:=$(AUTORELEASE)
+
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_URL=$(PROJECT_GIT)/project/bcm63xx/atf.git
+PKG_SOURCE_DATE:=2021-12-24
+PKG_SOURCE_VERSION:=e6d46baf3fae79f693f90bf34f7284c3dfc64aef
+PKG_MIRROR_HASH:=9d5d04f572b1b6ddc6eb3064b9cb09f5fe982e82d350790041d35316349af124
+
+PKG_MAINTAINER:=Rafał Miłecki <rafal@milecki.pl>
+
+include $(INCLUDE_DIR)/trusted-firmware-a.mk
+include $(INCLUDE_DIR)/package.mk
+
+define Trusted-Firmware-A/Default
+  PLAT:=bcm
+  DEFAULT:=y
+endef
+
+define Trusted-Firmware-A/bcm4908
+  BUILD_TARGET:=bcm4908
+  NAME:=BCM4908
+  BRCM_CHIP=4908
+  TFA_IMAGE:=bl31.bin
+endef
+
+TFA_TARGETS:= \
+	bcm4908
+
+TFA_MAKE_FLAGS += \
+	BRCM_CHIP=$(BRCM_CHIP)
+
+define Package/trusted-firmware-a/install
+	$(INSTALL_DIR) $(STAGING_DIR_IMAGE)
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/build/$(PLAT)/release/$(TFA_IMAGE) $(STAGING_DIR_IMAGE)/
+endef
+
+$(eval $(call BuildPackage/Trusted-Firmware-A))

package/boot/arm-trusted-firmware-mediatek/Makefile

@@ -1,6 +1,6 @@
 #
 # Copyright (C) 2017 Hauke Mehrtens
-# Copyright (C) 2020 Daniel Golle
+# Copyright (C) 2021 Daniel Golle
 #
 # This is free software, licensed under the GNU General Public License v2.
 # See /LICENSE for more information.
@@ -19,9 +19,23 @@ PKG_MIRROR_HASH:=b211b2f9143d4debc7ad8dc959cb606888af20af790855dd66c87e451b6a1bc
 
 PKG_MAINTAINER:=Daniel Golle <daniel@makrotopia.org>
 
+PKG_LICENSE_FILES:=LICENCE.mediatek
+
+BLOBS_TARBALL:=tfa-mtk-files-for-2020-11-09.tgz
+BROMIMAGE_EXEC:=bromimage-x64
+
 include $(INCLUDE_DIR)/trusted-firmware-a.mk
 include $(INCLUDE_DIR)/package.mk
 
+PKG_LICENSE+=proprietary
+
+define Download/tfa-files
+  URL:=@OPENWRT
+  URL_FILE:=$(BLOBS_TARBALL)
+  FILE:=$(BLOBS_TARBALL)
+  HASH:=689b097e4531d3eeca0c477675ab3dc3cace6ba4ed8a339116a9ede6537839d7
+endef
+
 define Download/mt7622-header-emmc
   URL:=https://raw.githubusercontent.com/frank-w/BPI-R64-ATF/a36efa5f7435b8079479d13b562fedc0aa0d42f0
   URL_FILE:=header_emmc.bin
@@ -36,74 +50,112 @@ define Download/mt7622-header-sdmmc
   HASH:=242908c04e25289d25ba9fab61a1930425af173051c43d275d1ac9877d6accb1
 endef
 
-define Package/arm-trusted-firmware-mt7622/Default
+define Trusted-Firmware-A/Default
-  SECTION:=boot
+  BUILD_TARGET:=mediatek
-  CATEGORY:=Boot Loaders
+  BUILD_SUBTARGET:=mt7622
-  TITLE:=ARM Trusted Firmware for MT7622
+  PLAT:=mt7622
-  DEPENDS:=@TARGET_mediatek_mt7622 @BROKEN
+  TFA_IMAGE:=bl2.img bl31.bin
-# wait until bromimage gets replace by static build
+  BOOT_DEVICE:=
-# libcrypto.so.1.1: version `OPENSSL_1_1_1' not found (required by tools/mediatek/bromimage/bromimage)
+  DDR_BLOB:=
 endef
 
-define Package/arm-trusted-firmware-mt7622-nor
+define Trusted-Firmware-A/mt7622-nor-1ddr
-  $(call Package/arm-trusted-firmware-mt7622/Default)
+  NAME:=MediaTek MT7622 (SPI-NOR, 1x DDR3)
-  VARIANT:=nor
+  BOOT_DEVICE:=nor
+  DDR_BLOB:=1
 endef
 
-define Package/arm-trusted-firmware-mt7622-snand
+define Trusted-Firmware-A/mt7622-nor-2ddr
-  $(call Package/arm-trusted-firmware-mt7622/Default)
+  NAME:=MediaTek MT7622 (SPI-NOR, 2x DDR3)
-  VARIANT:=snand
+  BOOT_DEVICE:=nor
+  DDR_BLOB:=2
 endef
 
-define Package/arm-trusted-firmware-mt7622-emmc
+define Trusted-Firmware-A/mt7622-snand-1ddr
-  $(call Package/arm-trusted-firmware-mt7622/Default)
+  NAME:=MediaTek MT7622 (SPI-NAND, 1x DDR3)
-  VARIANT:=emmc
+  BOOT_DEVICE:=snand
+  DDR_BLOB:=1
 endef
 
-define Package/arm-trusted-firmware-mt7622-sdmmc
+define Trusted-Firmware-A/mt7622-snand-2ddr
-  $(call Package/arm-trusted-firmware-mt7622/Default)
+  NAME:=MediaTek MT7622 (SPI-SNAND, 2x DDR3)
-  VARIANT:=sdmmc
+  BOOT_DEVICE:=snand
+  DDR_BLOB:=2
 endef
 
-MAKE_VARS = \
+define Trusted-Firmware-A/mt7622-emmc-1ddr
-	CROSS_COMPILE="$(TARGET_CROSS)"
+  NAME:=MediaTek MT7622 (eMMC, 1x DDR3)
+  BOOT_DEVICE:=emmc
+  DDR_BLOB:=1
+endef
 
-MAKE_FLAGS += \
+define Trusted-Firmware-A/mt7622-emmc-2ddr
-	PLAT=mt7622 \
+  NAME:=MediaTek MT7622 (eMMC, 2x DDR3)
-	BOOT_DEVICE=$(BUILD_VARIANT) \
+  BOOT_DEVICE:=emmc
-	all
+  DDR_BLOB:=2
+endef
+
+define Trusted-Firmware-A/mt7622-sdmmc-1ddr
+  NAME:=MediaTek MT7622 (SDcard, 1x DDR3)
+  BOOT_DEVICE:=sdmmc
+  DDR_BLOB:=1
+endef
+
+define Trusted-Firmware-A/mt7622-sdmmc-2ddr
+  NAME:=MediaTek MT7622 (SDcard, 2x DDR3)
+  BOOT_DEVICE:=sdmmc
+  DDR_BLOB:=2
+endef
+
+TFA_TARGETS:= \
+        mt7622-nor-1ddr \
+        mt7622-nor-2ddr \
+        mt7622-snand-1ddr \
+        mt7622-snand-2ddr \
+        mt7622-emmc-1ddr \
+        mt7622-emmc-2ddr \
+        mt7622-sdmmc-1ddr \
+        mt7622-sdmmc-2ddr
+
+TFA_MAKE_FLAGS += BOOT_DEVICE=$(BOOT_DEVICE) all
 
 define Build/Prepare
 	$(call Build/Prepare/Default)
-ifeq ($(BUILD_VARIANT),emmc)
+ifeq ($(BOOT_DEVICE),emmc)
 	$(eval $(call Download,mt7622-header-emmc))
 endif
-ifeq ($(BUILD_VARIANT),sdmmc)
+ifeq ($(BOOT_DEVICE),sdmmc)
 	$(eval $(call Download,mt7622-header-sdmmc))
 endif
+	$(eval $(call Download,tfa-files))
+# replace 'bromimage' tool by static version
+	$(TAR) -vxzf $(DL_DIR)/$(BLOBS_TARBALL) --wildcards \
+		-O "*/$(BROMIMAGE_EXEC)" > $(PKG_BUILD_DIR)/tools/mediatek/bromimage/bromimage
+	$(TAR) -vxzf $(DL_DIR)/$(BLOBS_TARBALL) --wildcards \
+		-C $(PKG_BUILD_DIR) \
+		--strip-components=1 */LICENCE.mediatek
 endef
 
-define Build/InstallDev
+define Build/Configure
+	$(call Build/Configure/Default)
+# replace DRAM calib blobs if needed (variant '2' is shipped upstream)
+ifeq ($(DDR_BLOB),1)
+	$(TAR) -vxzf $(DL_DIR)/$(BLOBS_TARBALL) --wildcards \
+		-C $(PKG_BUILD_DIR)/plat/mediatek/mt7622/drivers/dram/release \
+		--strip-components=1 */*.o
+endif
+endef
+
+define Package/trusted-firmware-a/install
 	$(INSTALL_DIR) $(STAGING_DIR_IMAGE)
-	$(CP) $(PKG_BUILD_DIR)/build/mt7622/release/bl2.bin $(STAGING_DIR_IMAGE)/mt7622-bl2-$(BUILD_VARIANT).bin
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/build/mt7622/release/bl2.img $(STAGING_DIR_IMAGE)/$(BUILD_VARIANT)-bl2.img
-	$(CP) $(PKG_BUILD_DIR)/build/mt7622/release/bl2.img $(STAGING_DIR_IMAGE)/mt7622-bl2-$(BUILD_VARIANT).img
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/build/mt7622/release/bl31.bin $(STAGING_DIR_IMAGE)/$(BUILD_VARIANT)-bl31.bin
-# bl31.bin turns out to be identical for all build variants
+ifeq ($(BOOT_DEVICE),emmc)
-	$(CP) $(PKG_BUILD_DIR)/build/mt7622/release/bl31.bin $(STAGING_DIR_IMAGE)/mt7622-bl31.bin
+	$(INSTALL_DATA) $(DL_DIR)/mt7622-header_emmc.bin $(STAGING_DIR_IMAGE)/
-ifeq ($(BUILD_VARIANT),emmc)
-	$(CP) $(DL_DIR)/mt7622-header_emmc.bin $(STAGING_DIR_IMAGE)
 endif
-ifeq ($(BUILD_VARIANT),sdmmc)
+ifeq ($(BOOT_DEVICE),sdmmc)
-	$(CP) $(DL_DIR)/mt7622-header_sdmmc.bin $(STAGING_DIR_IMAGE)
+	$(INSTALL_DATA) $(DL_DIR)/mt7622-header_sdmmc.bin $(STAGING_DIR_IMAGE)/
 endif
 endef
 
-define Package/arm-trusted-firmware-mt7622-nor/install
+$(eval $(call BuildPackage/Trusted-Firmware-A))
-endef
-Package/arm-trusted-firmware-mt7622-snand/install = $(Package/arm-trusted-firmware-mt7622-nor/install)
-Package/arm-trusted-firmware-mt7622-emmc/install = $(Package/arm-trusted-firmware-mt7622-nor/install)
-Package/arm-trusted-firmware-mt7622-sdmmc/install = $(Package/arm-trusted-firmware-mt7622-nor/install)
-
-$(eval $(call BuildPackage,arm-trusted-firmware-mt7622-nor))
-$(eval $(call BuildPackage,arm-trusted-firmware-mt7622-snand))
-$(eval $(call BuildPackage,arm-trusted-firmware-mt7622-emmc))
-$(eval $(call BuildPackage,arm-trusted-firmware-mt7622-sdmmc))

package/boot/at91bootstrap/Makefile

@@ -10,6 +10,7 @@ include $(TOPDIR)/rules.mk
 
 PKG_NAME:=at91bootstrap
 PKG_VERSION:=v3.9.3
+PKG_CPE_ID:=cpe:/a:linux4sam:at91bootstrap
 PKG_RELEASE:=2
 
 PKG_SOURCE_PROTO:=git

package/boot/tfa-layerscape/Makefile

@@ -9,25 +9,30 @@ include $(TOPDIR)/rules.mk
 
 PKG_NAME:=tfa-layerscape
 PKG_VERSION:=LSDK-20.04-update-290520
-PKG_RELEASE:=2
+PKG_RELEASE:=$(AUTORELEASE)
 
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://source.codeaurora.org/external/qoriq/qoriq-components/atf
 PKG_SOURCE_VERSION:=7d748e6f0ec652ba7c43733dc67a3d0b0217390a
 PKG_MIRROR_HASH:=d209c9ad18aac9f18375450b98b8dab00f0382ccb485df14623bf9b72ea1dd9b
-PKG_BUILD_DEPENDS:=arm-trusted-firmware-tools/host tfa-layerscape/host
+PKG_BUILD_DEPENDS:=tfa-layerscape/host
 
 include $(INCLUDE_DIR)/host-build.mk
 include $(INCLUDE_DIR)/package.mk
 
 HOST_CFLAGS += -Wall -Werror -pedantic -std=c99
 define Host/Compile
+	$(MAKE) -C \
+		$(HOST_BUILD_DIR)/tools/fiptool \
+		CFLAGS="$(HOST_CFLAGS)" \
+		LDFLAGS="$(HOST_LDFLAGS)"
 	$(MAKE) -C \
 		$(HOST_BUILD_DIR)/plat/nxp/tools \
 		CFLAGS="$(HOST_CFLAGS)"
 endef
 
 define Host/Install
+	$(INSTALL_BIN) $(HOST_BUILD_DIR)/tools/fiptool/fiptool $(STAGING_DIR_HOST)/bin/fiptool-layerscape
 	$(INSTALL_BIN) $(HOST_BUILD_DIR)/plat/nxp/tools/create_pbl $(STAGING_DIR_HOST)/bin/tfa-create-pbl
 	$(INSTALL_BIN) $(HOST_BUILD_DIR)/plat/nxp/tools/byte_swap $(STAGING_DIR_HOST)/bin/tfa-byte-swap
 endef
@@ -74,6 +79,20 @@ define Package/tfa-ls1043a-rdb-sdboot
   BOOT_MODE:=sd
 endef
 
+define Package/tfa-ls1046a-frwy
+  $(Package/tfa-generic)
+  TITLE:=NXP LS1046AFRWY Trusted Firmware
+  PLAT:=ls1046afrwy
+  BOOT_MODE:=qspi
+endef
+
+define Package/tfa-ls1046a-frwy-sdboot
+  $(Package/tfa-generic)
+  TITLE:=NXP LS1046AFRWY SD Boot Trusted Firmware
+  PLAT:=ls1046afrwy
+  BOOT_MODE:=sd
+endef
+
 define Package/tfa-ls1046a-rdb
   $(Package/tfa-generic)
   TITLE:=NXP LS1046ARDB Trusted Firmware
@@ -109,6 +128,20 @@ define Package/tfa-ls2088a-rdb
   BOOT_MODE:=nor
 endef
 
+define Package/tfa-lx2160a-rdb
+  $(Package/tfa-generic)
+  TITLE:=NXP LX2160ARDB Trusted Firmware
+  PLAT:=lx2160ardb
+  BOOT_MODE:=flexspi_nor
+endef
+
+define Package/tfa-lx2160a-rdb-sdboot
+  $(Package/tfa-generic)
+  TITLE:=NXP LX2160ARDB SD Boot Trusted Firmware
+  PLAT:=lx2160ardb
+  BOOT_MODE:=sd
+endef
+
 define Build/InstallDev
 	$(INSTALL_DIR) $(STAGING_DIR_IMAGE)
 	$(CP) $(PKG_BUILD_DIR)/build/$(PLAT)/release/bl2_$(BOOT_MODE).pbl \
@@ -123,7 +156,7 @@ define Build/Compile
 		fip pbl PLAT=$(PLAT) BOOT_MODE=$(BOOT_MODE) \
 		RCW=$(STAGING_DIR_IMAGE)/fsl_$(BUILD_VARIANT)-rcw.bin \
 		BL33=$(STAGING_DIR_IMAGE)/fsl_$(BUILD_VARIANT)-uboot.bin \
-		FIPTOOL=$(STAGING_DIR_HOST)/bin/fiptool \
+		FIPTOOL=$(STAGING_DIR_HOST)/bin/fiptool-layerscape \
 		CREATE_PBL=$(STAGING_DIR_HOST)/bin/tfa-create-pbl \
 		BYTE_SWAP=$(STAGING_DIR_HOST)/bin/tfa-byte-swap
 endef
@@ -134,11 +167,15 @@ TFAS := \
   ls1012a-frwy-sdboot \
   ls1043a-rdb \
   ls1043a-rdb-sdboot \
+  ls1046a-frwy \
+  ls1046a-frwy-sdboot \
   ls1046a-rdb \
   ls1046a-rdb-sdboot \
   ls1088a-rdb \
   ls1088a-rdb-sdboot \
-  ls2088a-rdb
+  ls2088a-rdb \
+  lx2160a-rdb \
+  lx2160a-rdb-sdboot
 
 $(eval $(call HostBuild))
 $(foreach tfa,$(TFAS), \

package/boot/uboot-at91/patches/001-fix-Wformat-security.patch

@@ -1,8 +1,6 @@
-diff --git a/cmd/version.c b/cmd/version.c
-index b2fffe99..bcbbeb18 100644
 --- a/cmd/version.c
 +++ b/cmd/version.c
-@@ -18,7 +18,7 @@ static int do_version(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+@@ -18,7 +18,7 @@ static int do_version(cmd_tbl_t *cmdtp,
  {
  	char buf[DISPLAY_OPTIONS_BANNER_LENGTH];
  
@@ -11,11 +9,9 @@ index b2fffe99..bcbbeb18 100644
  #ifdef CC_VERSION_STRING
  	puts(CC_VERSION_STRING "\n");
  #endif
-diff --git a/drivers/pinctrl/pinctrl-uclass.c b/drivers/pinctrl/pinctrl-uclass.c
-index 3425ed11..8c2e1d5c 100644
 --- a/drivers/pinctrl/pinctrl-uclass.c
 +++ b/drivers/pinctrl/pinctrl-uclass.c
-@@ -368,7 +368,7 @@ int pinctrl_get_pin_name(struct udevice *dev, int selector, char *buf,
+@@ -368,7 +368,7 @@ int pinctrl_get_pin_name(struct udevice
  	if (!ops->get_pin_name)
  		return -ENOSYS;
  
@@ -24,11 +20,9 @@ index 3425ed11..8c2e1d5c 100644
  
  	return 0;
  }
-diff --git a/lib/efi_loader/efi_variable.c b/lib/efi_loader/efi_variable.c
-index c316bdfe..5fe8129c 100644
 --- a/lib/efi_loader/efi_variable.c
 +++ b/lib/efi_loader/efi_variable.c
-@@ -522,7 +522,7 @@ efi_status_t EFIAPI efi_set_variable(u16 *variable_name,
+@@ -522,7 +522,7 @@ efi_status_t EFIAPI efi_set_variable(u16
  
  	if (old_size)
  		/* APPEND_WRITE */

package/boot/uboot-at91/patches/010-fix_dtc_compilation_on_host_gcc10.patch

@@ -0,0 +1,46 @@
+From e33a814e772cdc36436c8c188d8c42d019fda639 Mon Sep 17 00:00:00 2001
+From: Dirk Mueller <dmueller@suse.com>
+Date: Tue, 14 Jan 2020 18:53:41 +0100
+Subject: [PATCH] scripts/dtc: Remove redundant YYLOC global declaration
+
+gcc 10 will default to -fno-common, which causes this error at link
+time:
+
+  (.text+0x0): multiple definition of `yylloc'; dtc-lexer.lex.o (symbol from plugin):(.text+0x0): first defined here
+
+This is because both dtc-lexer as well as dtc-parser define the same
+global symbol yyloc. Before with -fcommon those were merged into one
+defintion. The proper solution would be to to mark this as "extern",
+however that leads to:
+
+  dtc-lexer.l:26:16: error: redundant redeclaration of 'yylloc' [-Werror=redundant-decls]
+   26 | extern YYLTYPE yylloc;
+      |                ^~~~~~
+In file included from dtc-lexer.l:24:
+dtc-parser.tab.h:127:16: note: previous declaration of 'yylloc' was here
+  127 | extern YYLTYPE yylloc;
+      |                ^~~~~~
+cc1: all warnings being treated as errors
+
+which means the declaration is completely redundant and can just be
+dropped.
+
+Signed-off-by: Dirk Mueller <dmueller@suse.com>
+Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
+[robh: cherry-pick from upstream]
+Cc: stable@vger.kernel.org
+Signed-off-by: Rob Herring <robh@kernel.org>
+---
+ scripts/dtc/dtc-lexer.l | 1 -
+ 1 file changed, 1 deletion(-)
+
+--- a/scripts/dtc/dtc-lexer.l
++++ b/scripts/dtc/dtc-lexer.l
+@@ -38,7 +38,6 @@ LINECOMMENT	"//".*\n
+ #include "srcpos.h"
+ #include "dtc-parser.tab.h"
+ 
+-YYLTYPE yylloc;
+ extern bool treesource_error;
+ 
+ /* CAUTION: this will stop working if we ever use yyless() or yyunput() */

package/boot/uboot-bcm4908/Makefile

@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+
+include $(TOPDIR)/rules.mk
+include $(INCLUDE_DIR)/kernel.mk
+
+PKG_RELEASE:=$(AUTORELEASE)
+
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_URL:=https://git.openwrt.org/project/bcm63xx/u-boot.git
+PKG_SOURCE_DATE:=2022-03-15
+PKG_SOURCE_VERSION:=0625aad74d1f5b6f9c068955ad3fd7f6df635e50
+PKG_MIRROR_HASH:=0602e0e4f101ead206940eccca832b75191905c1e81290340a89b07dbee7a6ce
+
+include $(INCLUDE_DIR)/u-boot.mk
+include $(INCLUDE_DIR)/package.mk
+
+define U-Boot/Default
+  BUILD_TARGET:=bcm4908
+  UBOOT_IMAGE:=u-boot-nodtb.bin
+  DEFAULT:=y
+endef
+
+define U-Boot/bcm4908
+  NAME:=Broadcom's BCM4908
+  UBOOT_CONFIG:=bcm94908
+  SOC:=bcm4908
+endef
+
+define U-Boot/bcm4912
+  NAME:=Broadcom's BCM4912
+  UBOOT_CONFIG:=bcm94912
+  SOC:=bcm4912
+endef
+
+UBOOT_TARGETS := \
+	bcm4908 \
+	bcm4912
+
+define Build/Prepare
+	$(call Build/Prepare/Default)
+	mkdir -p $(PKG_BUILD_DIR)/include/generated/
+	( cd $(PKG_BUILD_DIR)/board/broadcom/bcmbca/httpd/html/ && \
+	  $(STAGING_DIR_HOST)/bin/xxd -i index.html > ../../../../../include/generated/index.h && \
+	  $(STAGING_DIR_HOST)/bin/xxd -i flashing.html > ../../../../../include/generated/flashing.h && \
+	  $(STAGING_DIR_HOST)/bin/xxd -i fail.html > ../../../../../include/generated/fail.h && \
+	  $(STAGING_DIR_HOST)/bin/xxd -i 404.html > ../../../../../include/generated/404.h )
+endef
+
+define Build/InstallDev
+	$(INSTALL_DIR) $(STAGING_DIR_IMAGE)/u-boot
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/$(UBOOT_IMAGE) $(STAGING_DIR_IMAGE)/u-boot/u-boot-$(SOC).bin
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/u-boot.dtb $(STAGING_DIR_IMAGE)/u-boot/u-boot-$(SOC).dtb
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/arch/arm/dts/*.dtb $(STAGING_DIR_IMAGE)/u-boot/
+endef
+
+$(eval $(call BuildPackage/U-Boot))

package/boot/uboot-bcm4908/patches/100-check-config-allow-to-complete-build-even-with-ad-ho.patch

@@ -0,0 +1,40 @@
+From: Masahiro Yamada <yamada.masahiro@socionext.com>
+Date: Mon, 26 Sep 2016 13:05:02 +0900
+Subject: [PATCH] check-config: allow to complete build even with ad-hoc CONFIG
+ options
+
+Currently, the check-config.sh terminates the build when unknown
+ad-hoc options are detected.  I think it is too much because we may
+want to patch config headers locally in a build/deployment project.
+
+So, let's relax check-config.sh to just warn even if it detects
+options that are not in the whitelist.  Instead, this check can be
+done at the end of build, along with other checks.  It will catch
+more attention.
+
+Even with this change, the Buildman tool catches new warnings,
+so Tom can give NACK to new ad-hoc options.
+
+Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
+---
+ scripts/check-config.sh | 3 +--
+ 1 file changed, 1 insertion(+), 2 deletions(-)
+
+--- a/scripts/check-config.sh
++++ b/scripts/check-config.sh
+@@ -50,14 +50,13 @@ cat `find ${srctree} -name "Kconfig*"` |sed -n \
+ 	|sort |uniq > ${ok}
+ comm -23 ${suspects} ${ok} >${new_adhoc}
+ if [ -s ${new_adhoc} ]; then
+-	echo >&2 "Error: You must add new CONFIG options using Kconfig"
++	echo >&2 "Warning: You must add new CONFIG options using Kconfig"
+ 	echo >&2 "The following new ad-hoc CONFIG options were detected:"
+ 	cat >&2 ${new_adhoc}
+ 	echo >&2
+ 	echo >&2 "Please add these via Kconfig instead. Find a suitable Kconfig"
+ 	echo >&2 "file and add a 'config' or 'menuconfig' option."
+ 	# Don't delete the temporary files in case they are useful
+-	exit 1
+ else
+ 	rm ${suspects} ${ok} ${new_adhoc}
+ fi

package/boot/uboot-bcm4908/patches/101-tools-fix-mkimage-static-compilation.patch

@@ -0,0 +1,24 @@
+From 8efe417aa9de654425cc01d0fc93be355a3f648d Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
+Date: Wed, 13 Oct 2021 11:04:45 +0200
+Subject: [PATCH] tools: fix mkimage static compilation
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
+---
+ tools/Makefile | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/tools/Makefile
++++ b/tools/Makefile
+@@ -157,7 +157,7 @@ ifneq ($(CONFIG_MX23)$(CONFIG_MX28)$(CON
+ HOSTCFLAGS_kwbimage.o += \
+ 	$(shell pkg-config --cflags libssl libcrypto 2> /dev/null || echo "")
+ HOSTLOADLIBES_mkimage += \
+-	$(shell pkg-config --libs libssl libcrypto 2> /dev/null || echo "-lssl -lcrypto")
++	$(shell pkg-config --libs --static libssl libcrypto 2> /dev/null || echo "-lssl -lcrypto -lpthread")
+ 
+ # OS X deprecate openssl in favour of CommonCrypto, supress deprecation
+ # warnings on those systems

package/boot/uboot-bcm4908/patches/200-configs-bcm94908-unset-CONFIG_SPL.patch

@@ -0,0 +1,50 @@
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
+Date: Fri, 4 Mar 2022 09:21:32 +0100
+Subject: [PATCH] configs: bcm94908: unset CONFIG_SPL
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Compiling SPL is always tricky as it needs to fit limited resources.
+Fortunately in most cases there is no need to replace SPL or TPL while
+flashing a new firmware.
+
+Compiling SPL for BCM4908 seems to fail with non-Broadcom toolchain:
+aarch64-openwrt-linux-musl-ld.bfd: u-boot-spl section `.u_boot_list' will not fit in region `.sram'
+aarch64-openwrt-linux-musl-ld.bfd: section .bss VMA [00000000822b9000,00000000822b93ef] overlaps section .u_boot_list VMA [00000000822b8f60,00000000822b9a87]
+aarch64-openwrt-linux-musl-ld.bfd: region `.sram' overflowed by 2696 bytes
+
+It also requires hashtable.h which has to be generated using some
+Broadcom's custom perl script that isn't integrated as this point.
+
+For now just disable SPL and use only last-stage U-Boot that must be
+shipped with every firmware.
+
+Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
+---
+ configs/bcm94908_defconfig | 2 +-
+ configs/bcm94912_defconfig | 2 +-
+ 2 files changed, 2 insertions(+), 2 deletions(-)
+
+--- a/configs/bcm94908_defconfig
++++ b/configs/bcm94908_defconfig
+@@ -21,7 +21,7 @@ CONFIG_SPL_SERIAL_SUPPORT=y
+ CONFIG_TPL_LIBCOMMON_SUPPORT=y
+ CONFIG_TPL_LIBGENERIC_SUPPORT=y
+ CONFIG_NR_DRAM_BANKS=1
+-CONFIG_SPL=y
++# CONFIG_SPL is not set
+ CONFIG_SPL_LIBDISK_SUPPORT=y
+ CONFIG_ENV_VARS_UBOOT_CONFIG=y
+ CONFIG_TPL_SYS_MALLOC_F_LEN=0x11000
+--- a/configs/bcm94912_defconfig
++++ b/configs/bcm94912_defconfig
+@@ -22,7 +22,7 @@ CONFIG_TPL_LIBCOMMON_SUPPORT=y
+ CONFIG_TPL_LIBGENERIC_SUPPORT=y
+ CONFIG_SPL_SYS_MALLOC_F_LEN=0x2000
+ CONFIG_NR_DRAM_BANKS=2
+-CONFIG_SPL=y
++# CONFIG_SPL is not set
+ CONFIG_SPL_LIBDISK_SUPPORT=y
+ CONFIG_ENV_VARS_UBOOT_CONFIG=y
+ CONFIG_TPL_SYS_MALLOC_F_LEN=0x10000

package/boot/uboot-bcm4908/patches/201-Assume-TPL-support-for-ATF-when-compiling-U-Boot-wit.patch

@@ -0,0 +1,67 @@
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
+Date: Fri, 4 Mar 2022 09:23:34 +0100
+Subject: [PATCH] Assume TPL support for ATF when compiling U-Boot without TPL
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Broadcom's U-Boot behaviour depends on compilation time check whether
+TPL was compiled with or without ATF support. There is no proper runtime
+check.
+
+When compiling just U-Boot (without SPL & TPL) there is no way to tell
+if it's going to work with TPL with or without ATF support.
+
+Modify code to blindly assume ATF support in TPL in such cases. It seems
+to be always true for Broadcom and we need some assumption as we don't
+deal with compiling SPL or TPL.
+
+Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
+---
+ arch/arm/mach-bcmbca/bcm4908/cpu.c | 2 +-
+ arch/arm/mach-bcmbca/bcm4912/cpu.c | 2 +-
+ board/broadcom/bcmbca/board.c      | 4 ++--
+ 3 files changed, 4 insertions(+), 4 deletions(-)
+
+--- a/arch/arm/mach-bcmbca/bcm4908/cpu.c
++++ b/arch/arm/mach-bcmbca/bcm4908/cpu.c
+@@ -138,7 +138,7 @@ int get_nr_cpus()
+ 	return nr_cpus;
+ }
+ 
+-#if !defined(CONFIG_TPL_ATF)
++#if defined(CONFIG_TPL) && !defined(CONFIG_TPL_ATF)
+ void boot_secondary_cpu(unsigned long vector)
+ {
+ 	uint32_t cpu, nr_cpus = QUAD_CPUS;
+--- a/arch/arm/mach-bcmbca/bcm4912/cpu.c
++++ b/arch/arm/mach-bcmbca/bcm4912/cpu.c
+@@ -174,7 +174,7 @@ int bcmbca_get_boot_device(void)
+ 	return BOOT_DEVICE_NONE;
+ }
+ 
+-#if !defined(CONFIG_TPL_ATF)
++#if defined(CONFIG_TPL) && !defined(CONFIG_TPL_ATF)
+ void boot_secondary_cpu(unsigned long vector)
+ {
+ 	uint32_t cpu, nr_cpus = 4;
+--- a/board/broadcom/bcmbca/board.c
++++ b/board/broadcom/bcmbca/board.c
+@@ -103,7 +103,7 @@ void board_spinor_init(void)
+ 
+ int board_init(void)
+ {
+-#if !defined(CONFIG_TPL_ATF)
++#if defined(CONFIG_TPL) && !defined(CONFIG_TPL_ATF)
+ 	unsigned long vector;
+ #endif
+ 	board_sdk_init_e();
+@@ -121,7 +121,7 @@ int board_init(void)
+ 	printf("$Uboot: "BUILD_TAG" $\n");
+ #endif
+ 
+-#if !defined(CONFIG_TPL_ATF)
++#if defined(CONFIG_TPL) && !defined(CONFIG_TPL_ATF)
+ #if defined(CONFIG_ARM64)
+ 	vector  = (unsigned long)&_start;
+ #else

package/boot/uboot-envtools/files/ath79

@@ -61,6 +61,8 @@ samsung,wam250|\
 ubnt,nanostation-m|\
 yuncore,a770|\
 yuncore,a782|\
+yuncore,a930|\
+yuncore,xd3200|\
 yuncore,xd4200|\
 zyxel,nbg6616)
 	ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x10000" "0x10000"

package/boot/uboot-envtools/files/mvebu

@@ -14,8 +14,14 @@ touch /etc/config/ubootenv
 board=$(board_name)
 
 case "$board" in
+buffalo,ls421de)
+	ubootenv_add_uci_config "/dev/mtd3" "0x0" "0x10000"
+	;;
 cznic,turris-omnia)
-	if grep -q 'U-Boot 2015.10-rc2' /dev/mtd0; then
+	idx="$(find_mtd_index u-boot-env)"
+	if [ -n "$idx" ]; then
+		ubootenv_add_uci_config "/dev/mtd${idx}" "0x0" "0x10000" "0x10000"
+	elif grep -q 'U-Boot 2015.10-rc2' /dev/mtd0; then
 		ubootenv_add_uci_config "/dev/mtd0" "0xc0000" "0x10000" "0x40000"
 	else
 		ubootenv_add_uci_config "/dev/mtd0" "0xf0000" "0x10000" "0x10000"

package/boot/uboot-envtools/files/ramips

@@ -18,14 +18,20 @@ alfa-network,awusfree1|\
 alfa-network,quad-e4g|\
 alfa-network,r36m-e4g|\
 alfa-network,tube-e4g|\
-engenius,esr600h)
+engenius,esr600h|\
+sitecom,wlr-4100-v1-002)
 	ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x1000" "0x1000"
 	;;
 allnet,all0256n-4m|\
 allnet,all0256n-8m|\
-allnet,all5002)
+allnet,all5002|\
+yuncore,ax820)
 	ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x10000" "0x10000"
 	;;
+ampedwireless,ally-00x19k|\
+ampedwireless,ally-r1900k)
+	ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x1000" "0x20000" "4"
+	;;
 buffalo,wsr-1166dhp|\
 buffalo,wsr-600dhp|\
 mediatek,linkit-smart-7688|\
@@ -34,7 +40,8 @@ xiaomi,mi-router-3g-v2|\
 xiaomi,mi-router-4a-gigabit|\
 xiaomi,mi-router-4c|\
 xiaomi,miwifi-nano|\
-zbtlink,zbt-wg2626)
+zbtlink,zbt-wg2626|\
+zte,mf283plus)
 	ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x1000" "0x10000"
 	;;
 hootoo,ht-tm05|\
@@ -43,9 +50,13 @@ ravpower,rp-wd03)
 	[ -n "$idx" ] && \
 		ubootenv_add_uci_config "/dev/mtd$idx" "0x4000" "0x1000" "0x1000"
 	;;
+jcg,q20)
+	ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x20000" "0x20000"
+	;;
 linksys,ea7300-v1|\
 linksys,ea7300-v2|\
 linksys,ea7500-v2|\
+linksys,ea8100-v1|\
 xiaomi,mi-router-3g|\
 xiaomi,mi-router-3-pro|\
 xiaomi,mi-router-4|\
@@ -53,6 +64,11 @@ xiaomi,mi-router-ac2100|\
 xiaomi,redmi-router-ac2100)
 	ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x1000" "0x20000"
 	;;
+zyxel,nr7101)
+	idx="$(find_mtd_index Config)"
+	[ -n "$idx" ] && \
+		ubootenv_add_uci_config "/dev/mtd$idx" "0x0" "0x1000" "0x80000"
+	;;
 esac
 
 config_load ubootenv

package/boot/uboot-envtools/files/realtek

@@ -11,6 +11,9 @@ case "$board" in
 d-link,dgs-1210-16|\
 d-link,dgs-1210-28|\
 d-link,dgs-1210-10p|\
+zyxel,gs1900-8|\
+zyxel,gs1900-8hp-v1|\
+zyxel,gs1900-8hp-v2|\
 zyxel,gs1900-10hp)
 	idx="$(find_mtd_index u-boot-env)"
 	[ -n "$idx" ] && \

package/boot/uboot-envtools/patches/001-compile.patch

@@ -5,10 +5,10 @@
  override HOSTCC = $(CC)
  
 +ifneq ($(TARGET_CFLAGS),)
-+HOSTCFLAGS = $(TARGET_CFLAGS)
++KBUILD_HOSTCFLAGS = $(TARGET_CFLAGS)
 +endif
 +ifneq ($(TARGET_LDFLAGS),)
-+HOSTLDFLAGS = $(TARGET_LDFLAGS)
++KBUILD_HOSTLDFLAGS = $(TARGET_LDFLAGS)
 +endif
 +
  # Compile for a hosted environment on the target

package/boot/uboot-imx6/Makefile

@@ -24,6 +24,7 @@ define U-Boot/apalis_imx6
   NAME:=Toradex Apalis
   UBOOT_IMAGE:=SPL u-boot.img u-boot-with-spl.imx
   UBOOT_MAKE_FLAGS:=SPL u-boot.img u-boot-with-spl.imx
+  BUILD_DEVICES:=apalis
 endef
 
 define U-Boot/mx6cuboxi

package/boot/uboot-lantiq/patches/0030-lzma-force-8bit-reads.patch

@@ -0,0 +1,57 @@
+From a40a6e16ed76e5e26a0f60226b64c311d4a62c9f Mon Sep 17 00:00:00 2001
+From: Mathias Kresin <dev@kresin.me>
+Date: Sun, 31 Oct 2021 23:04:54 +0100
+Subject: [PATCH] lzma: force 8bit reads
+
+At least since gcc 7.3.0 (OpenWrt 18.06) lwr/lwl are used in the
+assembly of LzmaProps_Decode. While the decission made by the compiler
+looks perfect fine, it triggers some obscure hang on lantiq danube-s
+v1.5 with MX29LV640EB NOR flash chips.
+
+Only if the offset 1 is used, the hang can be observed. Using any other
+offset works fine:
+
+  lwl s0,0(a1) - s0 == 0x6d000080
+  lwl s0,1(a1) - hangs
+  lwl s0,2(a1) - s0 == 0x0080xxxx
+  lwl s0,3(a1) - s0 == 0x80xxxxxx
+
+It isn't clear whether it is a limitation of the flash chip, the EBU or
+something else.
+
+Force 8bit reads to prevent gcc optimizing the read with lwr/lwl
+instructions.
+
+Signed-off-by: Mathias Kresin <dev@kresin.me>
+---
+ lib/lzma/LzmaDec.c | 3 ++-
+ 1 file changed, 2 insertions(+), 1 deletion(-)
+
+--- a/lib/lzma/LzmaDec.c
++++ b/lib/lzma/LzmaDec.c
+@@ -7,6 +7,7 @@
+ #include "LzmaDec.h"
+ 
+ #include <linux/string.h>
++#include <asm/io.h>
+ 
+ #define kNumTopBits 24
+ #define kTopValue ((UInt32)1 << kNumTopBits)
+@@ -703,7 +704,7 @@ static ELzmaDummy LzmaDec_TryDummy(const
+ 
+ static void LzmaDec_InitRc(CLzmaDec *p, const Byte *data)
+ {
+-  p->code = ((UInt32)data[1] << 24) | ((UInt32)data[2] << 16) | ((UInt32)data[3] << 8) | ((UInt32)data[4]);
++  p->code = ((UInt32)readb(&data[1]) << 24) | ((UInt32)readb(&data[2]) << 16) | ((UInt32)readb(&data[3]) << 8) | ((UInt32)readb(&data[4]));
+   p->range = 0xFFFFFFFF;
+   p->needFlush = 0;
+ }
+@@ -929,7 +930,7 @@ SRes LzmaProps_Decode(CLzmaProps *p, con
+   if (size < LZMA_PROPS_SIZE)
+     return SZ_ERROR_UNSUPPORTED;
+   else
+-    dicSize = data[1] | ((UInt32)data[2] << 8) | ((UInt32)data[3] << 16) | ((UInt32)data[4] << 24);
++    dicSize = readb(&data[1]) | ((UInt32)readb(&data[2]) << 8) | ((UInt32)readb(&data[3]) << 16) | ((UInt32)readb(&data[4]) << 24);
+ 
+   if (dicSize < LZMA_DIC_MIN)
+     dicSize = LZMA_DIC_MIN;

package/boot/uboot-lantiq/patches/101-fix-crypt-header-clash.patch

@@ -0,0 +1,172 @@
+Fix header clash with system /usr/include/sha1.h and sha256.h when libmd
+is installed.
+
+Backport of u-boot commit "includes: move openssl headers to include/u-boot"
+https://github.com/u-boot/u-boot/commit/2b9912e6a7df7b1f60beb7942bd0e6fa5f9d0167
+
+--- a/board/gdsys/p1022/controlcenterd-id.c
++++ b/board/gdsys/p1022/controlcenterd-id.c
+@@ -30,7 +30,7 @@
+ #include <i2c.h>
+ #include <mmc.h>
+ #include <tpm.h>
+-#include <sha1.h>
++#include <u-boot/sha1.h>
+ #include <asm/byteorder.h>
+ #include <asm/unaligned.h>
+ #include <pca9698.h>
+--- a/board/pcs440ep/pcs440ep.c
++++ b/board/pcs440ep/pcs440ep.c
+@@ -13,7 +13,7 @@
+ #include <asm/processor.h>
+ #include <spd_sdram.h>
+ #include <status_led.h>
+-#include <sha1.h>
++#include <u-boot/sha1.h>
+ #include <asm/io.h>
+ #include <net.h>
+ #include <ata.h>
+--- a/common/cmd_sha1sum.c
++++ b/common/cmd_sha1sum.c
+@@ -11,7 +11,7 @@
+ #include <common.h>
+ #include <command.h>
+ #include <hash.h>
+-#include <sha1.h>
++#include <u-boot/sha1.h>
+ 
+ int do_sha1sum(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+ {
+--- a/common/hash.c
++++ b/common/hash.c
+@@ -14,8 +14,8 @@
+ #include <command.h>
+ #include <hw_sha.h>
+ #include <hash.h>
+-#include <sha1.h>
+-#include <sha256.h>
++#include <u-boot/sha1.h>
++#include <u-boot/sha256.h>
+ #include <asm/io.h>
+ #include <asm/errno.h>
+ 
+--- a/common/image-fit.c
++++ b/common/image-fit.c
+@@ -21,7 +21,7 @@ DECLARE_GLOBAL_DATA_PTR;
+ #endif /* !USE_HOSTCC*/
+ 
+ #include <bootstage.h>
+-#include <sha1.h>
++#include <u-boot/sha1.h>
+ #include <u-boot/crc.h>
+ #include <u-boot/md5.h>
+ 
+--- a/common/image.c
++++ b/common/image.c
+@@ -34,7 +34,7 @@
+ #endif
+ 
+ #include <u-boot/md5.h>
+-#include <sha1.h>
++#include <u-boot/sha1.h>
+ #include <asm/errno.h>
+ #include <asm/io.h>
+ 
+--- a/drivers/crypto/ace_sha.c
++++ b/drivers/crypto/ace_sha.c
+@@ -5,8 +5,8 @@
+  * SPDX-License-Identifier:	GPL-2.0+
+  */
+ #include <common.h>
+-#include <sha256.h>
+-#include <sha1.h>
++#include <u-boot/sha256.h>
++#include <u-boot/sha1.h>
+ #include <asm/errno.h>
+ #include "ace_sha.h"
+ 
+--- /dev/null
++++ b/include/u-boot/sha1.h
+@@ -0,0 +1 @@
++#include "../sha1.h"
+--- /dev/null
++++ b/include/u-boot/sha256.h
+@@ -0,0 +1 @@
++#include "../sha256.h"
+--- a/lib/rsa/rsa-verify.c
++++ b/lib/rsa/rsa-verify.c
+@@ -7,7 +7,7 @@
+ #include <common.h>
+ #include <fdtdec.h>
+ #include <rsa.h>
+-#include <sha1.h>
++#include <u-boot/sha1.h>
+ #include <asm/byteorder.h>
+ #include <asm/errno.h>
+ #include <asm/unaligned.h>
+--- a/lib/sha1.c
++++ b/lib/sha1.c
+@@ -36,7 +36,7 @@
+ #include <string.h>
+ #endif /* USE_HOSTCC */
+ #include <watchdog.h>
+-#include "sha1.h"
++#include <u-boot/sha1.h>
+ 
+ /*
+  * 32-bit integer manipulation macros (big endian)
+--- a/lib/sha256.c
++++ b/lib/sha256.c
+@@ -11,7 +11,7 @@
+ #endif /* USE_HOSTCC */
+ #include <watchdog.h>
+ #include <linux/string.h>
+-#include <sha256.h>
++#include <u-boot/sha256.h>
+ 
+ /*
+  * 32-bit integer manipulation macros (big endian)
+--- a/lib/tpm.c
++++ b/lib/tpm.c
+@@ -7,7 +7,7 @@
+ 
+ #include <common.h>
+ #include <stdarg.h>
+-#include <sha1.h>
++#include <u-boot/sha1.h>
+ #include <tpm.h>
+ #include <asm/unaligned.h>
+ 
+--- a/tools/imls/imls.c
++++ b/tools/imls/imls.c
+@@ -24,7 +24,7 @@
+ #include <mtd/mtd-user.h>
+ #endif
+ 
+-#include <sha1.h>
++#include <u-boot/sha1.h>
+ #include <libfdt.h>
+ #include <fdt_support.h>
+ #include <image.h>
+--- a/tools/mkimage.h
++++ b/tools/mkimage.h
+@@ -18,7 +18,7 @@
+ #include <sys/stat.h>
+ #include <time.h>
+ #include <unistd.h>
+-#include <sha1.h>
++#include <u-boot/sha1.h>
+ #include "fdt_host.h"
+ 
+ #undef MKIMAGE_DEBUG
+--- a/tools/ubsha1.c
++++ b/tools/ubsha1.c
+@@ -13,7 +13,7 @@
+ #include <errno.h>
+ #include <string.h>
+ #include <sys/stat.h>
+-#include "sha1.h"
++#include <u-boot/sha1.h>
+ 
+ int main (int argc, char **argv)
+ {

package/boot/uboot-layerscape/Makefile

@@ -9,7 +9,7 @@ include $(TOPDIR)/rules.mk
 
 PKG_NAME:=uboot-layerscape
 PKG_VERSION:=LSDK-20.04-update-290520
-PKG_RELEASE:=2
+PKG_RELEASE:=$(AUTORELEASE)
 
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://source.codeaurora.org/external/qoriq/qoriq-components/u-boot
@@ -55,6 +55,16 @@ define U-Boot/fsl_ls1043a-rdb-sdboot
   UBOOT_CONFIG:=ls1043ardb_tfa
 endef
 
+define U-Boot/fsl_ls1046a-frwy
+  NAME:=NXP LS1046AFRWY
+  UBOOT_CONFIG:=ls1046afrwy_tfa
+endef
+
+define U-Boot/fsl_ls1046a-frwy-sdboot
+  NAME:=NXP LS1046AFRWY SD Card Boot
+  UBOOT_CONFIG:=ls1046afrwy_tfa
+endef
+
 define U-Boot/fsl_ls1046a-rdb
   NAME:=NXP LS1046ARDB
   UBOOT_CONFIG:=ls1046ardb_tfa
@@ -80,6 +90,16 @@ define U-Boot/fsl_ls2088a-rdb
   UBOOT_CONFIG:=ls2088ardb_tfa
 endef
 
+define U-Boot/fsl_lx2160a-rdb
+  NAME:=NXP LX2160ARDB
+  UBOOT_CONFIG:=lx2160ardb_tfa
+endef
+
+define U-Boot/fsl_lx2160a-rdb-sdboot
+  NAME:=NXP LX2160ARDB SD Card Boot
+  UBOOT_CONFIG:=lx2160ardb_tfa
+endef
+
 define U-Boot/fsl_ls1021a-twr
   NAME:=NXP LS1021ATWR
   BUILD_SUBTARGET:=armv7
@@ -109,11 +129,15 @@ UBOOT_TARGETS := \
   fsl_ls1012a-frwy-sdboot \
   fsl_ls1043a-rdb \
   fsl_ls1043a-rdb-sdboot \
+  fsl_ls1046a-frwy \
+  fsl_ls1046a-frwy-sdboot \
   fsl_ls1046a-rdb \
   fsl_ls1046a-rdb-sdboot \
   fsl_ls1088a-rdb \
   fsl_ls1088a-rdb-sdboot \
   fsl_ls2088a-rdb \
+  fsl_lx2160a-rdb \
+  fsl_lx2160a-rdb-sdboot \
   fsl_ls1021a-twr \
   fsl_ls1021a-twr-sdboot \
   fsl_ls1021a-iot-sdboot

package/boot/uboot-layerscape/files/fsl_ls1021a-iot-sdboot-uEnv.txt

@@ -2,7 +2,7 @@ fdtaddr=0x8f000000
 loadaddr=0x81000000
 fdt_high=0x8fffffff
 initrd_high=0xffffffff
-sd_boot=ext4load mmc 0:1 $loadaddr fitImage;bootm $loadaddr
+sd_boot=ext4load mmc 0:1 ${loadaddr} fitImage;bootm ${loadaddr}
 bootargs=root=/dev/mmcblk0p2 rw rootwait rootfstype=squashfs,f2fs noinitrd earlycon=uart8250,mmio,0x21c0500 console=ttyS0,115200
 bootcmd=echo starting openwrt ...;run sd_boot
 bootdelay=3

package/boot/uboot-layerscape/files/fsl_ls1046a-frwy-sdboot-uEnv.txt

@@ -0,0 +1,8 @@
+fdtaddr=0x8f000000
+loadaddr=0x81000000
+bootm_size=0x10000000
+hwconfig=fsl_ddr:bank_intlv=auto
+sd_boot=ext4load mmc 0:1 ${loadaddr} fitImage;bootm ${loadaddr}
+bootargs=root=/dev/mmcblk0p2 rw rootwait rootfstype=squashfs,f2fs noinitrd earlycon=uart8250,mmio,0x21c0500 console=ttyS0,115200
+bootcmd=echo starting openwrt ...;run sd_boot
+bootdelay=3

package/boot/uboot-layerscape/files/fsl_ls1046a-frwy-uEnv.txt

@@ -0,0 +1,8 @@
+fdtaddr=0x8f000000
+loadaddr=0x81000000
+bootm_size=0x10000000
+hwconfig=fsl_ddr:bank_intlv=auto
+qspi_boot=sf probe 0:0;sf read $fdtaddr f00000 100000;sf read $loadaddr 1000000 1000000;bootm $loadaddr - $fdtaddr
+bootargs=root=/dev/mtdblock9 rootfstype=squashfs,jffs2 noinitrd earlycon=uart8250,mmio,0x21c0500 console=ttyS0,115200 mtdparts=1550000.spi:1m(bl2),4m(fip),1m(u-boot-env),3m(reserved-1),256k(fman),5888k(reserved-2),1m(dtb),16m(kernel),32m(rootfs),49m@0xf00000(firmware)
+bootcmd=echo starting openwrt ...;run qspi_boot
+bootdelay=3

package/boot/uboot-layerscape/files/fsl_lx2160a-rdb-sdboot-uEnv.txt

@@ -0,0 +1,9 @@
+fdtaddr=0x8f000000
+loadaddr=0x81000000
+bootm_size=0x10000000
+hwconfig=fsl_ddr:bank_intlv=auto
+mc_init=mmc read 80000000 5000 1800;mmc read 80300000 7000 800;fsl_mc start mc 80000000 80300000;mmc read 80400000 6800 800;fsl_mc apply dpl 80400000
+sd_boot=ext4load mmc 0:1 ${loadaddr} fitImage;bootm ${loadaddr}
+bootargs=root=/dev/mmcblk0p2 rw rootwait rootfstype=squashfs,f2fs noinitrd earlycon=pl011,mmio32,0x21c0000 console=ttyAMA0,115200
+bootcmd=echo starting openwrt ...;run mc_init;run sd_boot
+bootdelay=3

package/boot/uboot-layerscape/files/fsl_lx2160a-rdb-uEnv.txt

@@ -0,0 +1,9 @@
+fdtaddr=0x8f000000
+loadaddr=0x81000000
+bootm_size=0x10000000
+hwconfig=fsl_ddr:bank_intlv=auto
+mc_init=sf probe 0:0;sf read 80000000 a00000 300000;sf read 80300000 e00000 100000;fsl_mc start mc 80000000 80300000;sf read 80400000 d00000 100000;fsl_mc apply dpl 80400000
+xspi_boot=sf probe 0:0;sf read $fdtaddr f00000 100000;sf read $loadaddr 1000000 1000000;bootm $loadaddr - $fdtaddr
+bootargs=root=/dev/mtdblock9 rootfstype=squashfs,jffs2 noinitrd earlycon=pl011,mmio32,0x21c0000 console=ttyAMA0,115200 mtdparts=20c0000.spi-0:1m(bl2),4m(fip),1m(u-boot-env),4m(reserved-1),3m(mc),1m(dpl),1m(dpc),1m(dtb),16m(kernel),32m(rootfs),49m@0xf00000(firmware)
+bootcmd=echo starting openwrt ...;run mc_init;run xspi_boot
+bootdelay=3

package/boot/uboot-layerscape/patches/010-fix_dtc_compilation_on_host_gcc10.patch

@@ -0,0 +1,46 @@
+From e33a814e772cdc36436c8c188d8c42d019fda639 Mon Sep 17 00:00:00 2001
+From: Dirk Mueller <dmueller@suse.com>
+Date: Tue, 14 Jan 2020 18:53:41 +0100
+Subject: [PATCH] scripts/dtc: Remove redundant YYLOC global declaration
+
+gcc 10 will default to -fno-common, which causes this error at link
+time:
+
+  (.text+0x0): multiple definition of `yylloc'; dtc-lexer.lex.o (symbol from plugin):(.text+0x0): first defined here
+
+This is because both dtc-lexer as well as dtc-parser define the same
+global symbol yyloc. Before with -fcommon those were merged into one
+defintion. The proper solution would be to to mark this as "extern",
+however that leads to:
+
+  dtc-lexer.l:26:16: error: redundant redeclaration of 'yylloc' [-Werror=redundant-decls]
+   26 | extern YYLTYPE yylloc;
+      |                ^~~~~~
+In file included from dtc-lexer.l:24:
+dtc-parser.tab.h:127:16: note: previous declaration of 'yylloc' was here
+  127 | extern YYLTYPE yylloc;
+      |                ^~~~~~
+cc1: all warnings being treated as errors
+
+which means the declaration is completely redundant and can just be
+dropped.
+
+Signed-off-by: Dirk Mueller <dmueller@suse.com>
+Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
+[robh: cherry-pick from upstream]
+Cc: stable@vger.kernel.org
+Signed-off-by: Rob Herring <robh@kernel.org>
+---
+ scripts/dtc/dtc-lexer.l | 1 -
+ 1 file changed, 1 deletion(-)
+
+--- a/scripts/dtc/dtc-lexer.l
++++ b/scripts/dtc/dtc-lexer.l
+@@ -38,7 +38,6 @@ LINECOMMENT	"//".*\n
+ #include "srcpos.h"
+ #include "dtc-parser.tab.h"
+ 
+-YYLTYPE yylloc;
+ extern bool treesource_error;
+ 
+ /* CAUTION: this will stop working if we ever use yyless() or yyunput() */

package/boot/uboot-layerscape/patches/0900-layerscape-adjust-LS1021A-IOT-config-for-OpenWrt.patch

@@ -0,0 +1,45 @@
+From b382eeafe01df21da3518b2f1dd7d22ee114efb0 Mon Sep 17 00:00:00 2001
+From: Pawel Dembicki <paweldembicki@gmail.com>
+Date: Mon, 24 Oct 2022 14:19:38 +0200
+Subject: [PATCH] layerscape: adjust LS1021A-IOT config for OpenWrt
+
+Two configs are required:
+  - FIT
+  - Ext4load
+
+Let's enable it. U-boot is now bigger than 512K. Let's enlarge it to
+768K. Envs start at 1M, so it will fit.
+
+Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
+---
+ configs/ls1021aiot_sdcard_defconfig | 3 +++
+ include/configs/ls1021aiot.h        | 4 ++--
+ 2 files changed, 5 insertions(+), 2 deletions(-)
+
+--- a/configs/ls1021aiot_sdcard_defconfig
++++ b/configs/ls1021aiot_sdcard_defconfig
+@@ -27,8 +27,11 @@ CONFIG_CMD_MII=y
+ # CONFIG_CMD_MDIO is not set
+ CONFIG_CMD_PING=y
+ CONFIG_CMD_EXT2=y
++CONFIG_CMD_EXT4=y
+ CONFIG_CMD_FAT=y
+ # CONFIG_SPL_EFI_PARTITION is not set
++CONFIG_FIT=y
++CONFIG_FIT_VERBOSE=y
+ CONFIG_OF_CONTROL=y
+ CONFIG_ENV_OVERWRITE=y
+ CONFIG_ENV_IS_IN_MMC=y
+--- a/include/configs/ls1021aiot.h
++++ b/include/configs/ls1021aiot.h
+@@ -78,8 +78,8 @@
+ 		CONFIG_SYS_MONITOR_LEN)
+ #define CONFIG_SYS_SPL_MALLOC_SIZE	0x100000
+ #define CONFIG_SPL_BSS_START_ADDR	0x80100000
+-#define CONFIG_SPL_BSS_MAX_SIZE		0x80000
+-#define CONFIG_SYS_MONITOR_LEN		0x80000
++#define CONFIG_SPL_BSS_MAX_SIZE		0xc0000
++#define CONFIG_SYS_MONITOR_LEN		0xc0000
+ #endif
+ 
+ #define CONFIG_SYS_DDR_SDRAM_BASE	0x80000000UL

package/boot/uboot-sunxi/Makefile

@@ -301,6 +301,12 @@ define U-Boot/Bananapi_M2_Ultra
   BUILD_DEVICES:=sinovoip_bananapi-m2-ultra
 endef
 
+define U-Boot/bananapi_m2_berry
+  BUILD_SUBTARGET:=cortexa7
+  NAME:=Bananapi M2 Berry
+  BUILD_DEVICES:=sinovoip_bananapi-m2-berry
+endef
+
 UBOOT_TARGETS := \
 	a64-olinuxino \
 	a64-olinuxino-emmc \
@@ -312,6 +318,7 @@ UBOOT_TARGETS := \
 	A20-OLinuXino_MICRO \
 	bananapi_m2_plus_h3 \
 	Bananapi \
+	bananapi_m2_berry \
 	Bananapi_M2_Ultra \
 	Bananapro \
 	Cubieboard \

package/boot/uboot-sunxi/patches/260-add-missing-type-u64.patch

@@ -0,0 +1,10 @@
+--- a/include/linux/types.h
++++ b/include/linux/types.h
+@@ -1,6 +1,7 @@
+ #ifndef _LINUX_TYPES_H
+ #define _LINUX_TYPES_H
+ 
++typedef unsigned long long __u64;
+ #include <linux/posix_types.h>
+ #include <asm/types.h>
+ #include <stdbool.h>

package/devel/binutils/Makefile

@@ -9,7 +9,7 @@ include $(TOPDIR)/rules.mk
 
 PKG_NAME:=binutils
 PKG_VERSION:=2.35.1
-PKG_RELEASE:=1
+PKG_RELEASE:=2
 
 PKG_SOURCE_URL:=@GNU/binutils
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.xz
@@ -34,7 +34,7 @@ define Package/libbfd
   SECTION:=libs
   CATEGORY:=Libraries
   TITLE:=libbfd
-  DEPENDS:=+zlib $(ICONV_DEPENDS) $(INTL_DEPENDS)
+  DEPENDS:=+zlib $(INTL_DEPENDS)
 endef
 
 define Package/libctf
@@ -79,6 +79,8 @@ endef
 
 TARGET_CFLAGS += $(FPIC) -Wno-unused-value
 
+TARGET_LDFLAGS += $(if $(INTL_FULL),-lintl)
+
 CONFIGURE_ARGS += \
 	--host=$(REAL_GNU_TARGET_NAME) \
 	--target=$(REAL_GNU_TARGET_NAME) \

package/firmware/amd64-microcode/Makefile

@@ -1,45 +0,0 @@
-#
-# Copyright (C) 2018 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=amd64-microcode
-PKG_VERSION:=20191218
-PKG_RELEASE:=1
-
-PKG_SOURCE:=amd64-microcode_3.$(PKG_VERSION).$(PKG_RELEASE).tar.xz
-PKG_SOURCE_URL:=http://ftp.debian.org/debian/pool/non-free/a/amd64-microcode/
-PKG_HASH:=f469b79348097c5f04641b67a39d0ee5a2a1916c9556281626c04f2275d4132d
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-3.$(PKG_VERSION).$(PKG_RELEASE)
-
-PKG_LICENSE_FILE:=LICENSE.amd-ucode
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/amd64-microcode
-  SECTION:=firmware
-  CATEGORY:=Firmware
-  URL:=$(PKG_SOURCE_URL)
-  DEPENDS:=@TARGET_x86
-  TITLE:=AMD64 CPU microcode
-endef
-
-define Build/Prepare
-	rm -rf $(PKG_BUILD_DIR)
-	mkdir -p $(PKG_BUILD_DIR)
-	$(TAR) -C $(BUILD_DIR) -xJf $(DL_DIR)/$(PKG_SOURCE)
-endef
-
-define Build/Compile
-endef
-
-define Package/amd64-microcode/install
-	$(INSTALL_DIR) $(1)/lib/firmware/amd-ucode
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/*.bin $(1)/lib/firmware/amd-ucode
-endef
-
-$(eval $(call BuildPackage,amd64-microcode))

package/firmware/cypress-firmware/Makefile

@@ -7,25 +7,24 @@
 
 include $(TOPDIR)/rules.mk
 
-UNPACK_CMD=unzip -q -p $(DL_DIR)/$(PKG_SOURCE) $(PKG_SOURCE_UNZIP) | gzip -dc | $(HOST_TAR) -C $(1) $(TAR_OPTIONS)
-
 PKG_NAME:=cypress-firmware
-PKG_VERSION:=v5.4.18-2020_0402
+PKG_VERSION:=5.4.18-2021_0812
-PKG_RELEASE:=3
+PKG_RELEASE:=1
 
-PKG_SOURCE_UNZIP:=cypress-firmware-$(PKG_VERSION).tar.gz
+PKG_SOURCE_PROTO:=git
-PKG_SOURCE:=cypress-fmac-$(PKG_VERSION).zip
+PKG_SOURCE_URL:=https://github.com/Infineon/ifx-linux-firmware/
-PKG_SOURCE_URL:=https://community.cypress.com/servlet/JiveServlet/download/19375-1-53475/
+PKG_MIRROR_HASH:=ac882b482dd401b53cdecc6004cd2bd3d65e888c19206dcf10931a28033ada4d
-PKG_HASH:=b12b0570f462c2f3c26dde98b10235a845a7109037def1e7e51af728bcc1a958
+PKG_SOURCE_VERSION:=release-v$(PKG_VERSION)
 
 PKG_MAINTAINER:=Álvaro Fernández Rojas <noltari@gmail.com>
+PKG_LICENSE_FILES:=LICENCE
 
 include $(INCLUDE_DIR)/package.mk
 
 define Package/cypress-firmware-default
   SECTION:=firmware
   CATEGORY:=Firmware
-  URL:=https://community.cypress.com/community/linux
+  URL:=https://community.infineon.com/
 endef
 
 define Build/Compile
@@ -41,10 +40,10 @@ endef
 define Package/cypress-firmware-43012-sdio/install
 	$(INSTALL_DIR) $(1)/lib/firmware/brcm
 	$(INSTALL_DATA) \
-		$(PKG_BUILD_DIR)/firmware/brcmfmac43012-sdio.bin \
+		$(PKG_BUILD_DIR)/firmware/cyfmac43012-sdio.bin \
 		$(1)/lib/firmware/brcm/brcmfmac43012-sdio.bin
 	$(INSTALL_DATA) \
-		$(PKG_BUILD_DIR)/firmware/brcmfmac43012-sdio.clm_blob \
+		$(PKG_BUILD_DIR)/firmware/cyfmac43012-sdio.clm_blob \
 		$(1)/lib/firmware/brcm/brcmfmac43012-sdio.clm_blob
 endef
 
@@ -59,7 +58,7 @@ endef
 define Package/cypress-firmware-43340-sdio/install
 	$(INSTALL_DIR) $(1)/lib/firmware/brcm
 	$(INSTALL_DATA) \
-		$(PKG_BUILD_DIR)/firmware/brcmfmac43340-sdio.bin \
+		$(PKG_BUILD_DIR)/firmware/cyfmac43340-sdio.bin \
 		$(1)/lib/firmware/brcm/brcmfmac43340-sdio.bin
 endef
 
@@ -76,7 +75,7 @@ endef
 define Package/cypress-firmware-43362-sdio/install
 	$(INSTALL_DIR) $(1)/lib/firmware/brcm
 	$(INSTALL_DATA) \
-		$(PKG_BUILD_DIR)/firmware/brcmfmac43362-sdio.bin \
+		$(PKG_BUILD_DIR)/firmware/cyfmac43362-sdio.bin \
 		$(1)/lib/firmware/brcm/brcmfmac43362-sdio.bin
 endef
 
@@ -91,7 +90,7 @@ endef
 define Package/cypress-firmware-4339-sdio/install
 	$(INSTALL_DIR) $(1)/lib/firmware/brcm
 	$(INSTALL_DATA) \
-		$(PKG_BUILD_DIR)/firmware/brcmfmac4339-sdio.bin \
+		$(PKG_BUILD_DIR)/firmware/cyfmac4339-sdio.bin \
 		$(1)/lib/firmware/brcm/brcmfmac4339-sdio.bin
 endef
 
@@ -108,10 +107,10 @@ endef
 define Package/cypress-firmware-43430-sdio/install
 	$(INSTALL_DIR) $(1)/lib/firmware/brcm
 	$(INSTALL_DATA) \
-		$(PKG_BUILD_DIR)/firmware/brcmfmac43430-sdio.bin \
+		$(PKG_BUILD_DIR)/firmware/cyfmac43430-sdio.bin \
 		$(1)/lib/firmware/brcm/brcmfmac43430-sdio.bin
 	$(INSTALL_DATA) \
-		$(PKG_BUILD_DIR)/firmware/brcmfmac43430-sdio.clm_blob \
+		$(PKG_BUILD_DIR)/firmware/cyfmac43430-sdio.clm_blob \
 		$(1)/lib/firmware/brcm/brcmfmac43430-sdio.clm_blob
 endef
 
@@ -128,10 +127,10 @@ endef
 define Package/cypress-firmware-43455-sdio/install
 	$(INSTALL_DIR) $(1)/lib/firmware/brcm
 	$(INSTALL_DATA) \
-		$(PKG_BUILD_DIR)/firmware/brcmfmac43455-sdio.bin \
+		$(PKG_BUILD_DIR)/firmware/cyfmac43455-sdio.bin \
 		$(1)/lib/firmware/brcm/brcmfmac43455-sdio.bin
 	$(INSTALL_DATA) \
-		$(PKG_BUILD_DIR)/firmware/brcmfmac43455-sdio.clm_blob \
+		$(PKG_BUILD_DIR)/firmware/cyfmac43455-sdio.clm_blob \
 		$(1)/lib/firmware/brcm/brcmfmac43455-sdio.clm_blob
 endef
 
@@ -146,10 +145,10 @@ endef
 define Package/cypress-firmware-4354-sdio/install
 	$(INSTALL_DIR) $(1)/lib/firmware/brcm
 	$(INSTALL_DATA) \
-		$(PKG_BUILD_DIR)/firmware/brcmfmac4354-sdio.bin \
+		$(PKG_BUILD_DIR)/firmware/cyfmac4354-sdio.bin \
 		$(1)/lib/firmware/brcm/brcmfmac4354-sdio.bin
 	$(INSTALL_DATA) \
-		$(PKG_BUILD_DIR)/firmware/brcmfmac4354-sdio.clm_blob \
+		$(PKG_BUILD_DIR)/firmware/cyfmac4354-sdio.clm_blob \
 		$(1)/lib/firmware/brcm/brcmfmac4354-sdio.clm_blob
 endef
 
@@ -164,10 +163,10 @@ endef
 define Package/cypress-firmware-4356-pcie/install
 	$(INSTALL_DIR) $(1)/lib/firmware/brcm
 	$(INSTALL_DATA) \
-		$(PKG_BUILD_DIR)/firmware/brcmfmac4356-pcie.bin \
+		$(PKG_BUILD_DIR)/firmware/cyfmac4356-pcie.bin \
 		$(1)/lib/firmware/brcm/brcmfmac4356-pcie.bin
 	$(INSTALL_DATA) \
-		$(PKG_BUILD_DIR)/firmware/brcmfmac4356-pcie.clm_blob \
+		$(PKG_BUILD_DIR)/firmware/cyfmac4356-pcie.clm_blob \
 		$(1)/lib/firmware/brcm/brcmfmac4356-pcie.clm_blob
 endef
 
@@ -182,10 +181,10 @@ endef
 define Package/cypress-firmware-4356-sdio/install
 	$(INSTALL_DIR) $(1)/lib/firmware/brcm
 	$(INSTALL_DATA) \
-		$(PKG_BUILD_DIR)/firmware/brcmfmac4356-sdio.bin \
+		$(PKG_BUILD_DIR)/firmware/cyfmac4356-sdio.bin \
 		$(1)/lib/firmware/brcm/brcmfmac4356-sdio.bin
 	$(INSTALL_DATA) \
-		$(PKG_BUILD_DIR)/firmware/brcmfmac4356-sdio.clm_blob \
+		$(PKG_BUILD_DIR)/firmware/cyfmac4356-sdio.clm_blob \
 		$(1)/lib/firmware/brcm/brcmfmac4356-sdio.clm_blob
 endef
 
@@ -200,51 +199,15 @@ endef
 define Package/cypress-firmware-43570-pcie/install
 	$(INSTALL_DIR) $(1)/lib/firmware/brcm
 	$(INSTALL_DATA) \
-		$(PKG_BUILD_DIR)/firmware/brcmfmac43570-pcie.bin \
+		$(PKG_BUILD_DIR)/firmware/cyfmac43570-pcie.bin \
 		$(1)/lib/firmware/brcm/brcmfmac43570-pcie.bin
 	$(INSTALL_DATA) \
-		$(PKG_BUILD_DIR)/firmware/brcmfmac43570-pcie.clm_blob \
+		$(PKG_BUILD_DIR)/firmware/cyfmac43570-pcie.clm_blob \
 		$(1)/lib/firmware/brcm/brcmfmac43570-pcie.clm_blob
 endef
 
 $(eval $(call BuildPackage,cypress-firmware-43570-pcie))
 
-# Cypress 4359 PCIe Firmware
-define Package/cypress-firmware-4359-pcie
-  $(Package/cypress-firmware-default)
-  TITLE:=CYW4359 FullMac PCIe firmware
-endef
-
-define Package/cypress-firmware-4359-pcie/install
-	$(INSTALL_DIR) $(1)/lib/firmware/brcm
-	$(INSTALL_DATA) \
-		$(PKG_BUILD_DIR)/firmware/brcmfmac4359-pcie.bin \
-		$(1)/lib/firmware/brcm/brcmfmac4359-pcie.bin
-	$(INSTALL_DATA) \
-		$(PKG_BUILD_DIR)/firmware/brcmfmac4359-pcie.clm_blob \
-		$(1)/lib/firmware/brcm/brcmfmac4359-pcie.clm_blob
-endef
-
-$(eval $(call BuildPackage,cypress-firmware-4359-pcie))
-
-# Cypress 4359 SDIO Firmware
-define Package/cypress-firmware-4359-sdio
-  $(Package/cypress-firmware-default)
-  TITLE:=CYW4359 FullMac SDIO firmware
-endef
-
-define Package/cypress-firmware-4359-sdio/install
-	$(INSTALL_DIR) $(1)/lib/firmware/brcm
-	$(INSTALL_DATA) \
-		$(PKG_BUILD_DIR)/firmware/brcmfmac4359-sdio.bin \
-		$(1)/lib/firmware/brcm/brcmfmac4359-sdio.bin
-	$(INSTALL_DATA) \
-		$(PKG_BUILD_DIR)/firmware/brcmfmac4359-sdio.clm_blob \
-		$(1)/lib/firmware/brcm/brcmfmac4359-sdio.clm_blob
-endef
-
-$(eval $(call BuildPackage,cypress-firmware-4359-sdio))
-
 # Cypress 4373 SDIO Firmware
 define Package/cypress-firmware-4373-sdio
   $(Package/cypress-firmware-default)
@@ -254,10 +217,10 @@ endef
 define Package/cypress-firmware-4373-sdio/install
 	$(INSTALL_DIR) $(1)/lib/firmware/brcm
 	$(INSTALL_DATA) \
-		$(PKG_BUILD_DIR)/firmware/brcmfmac4373-sdio.bin \
+		$(PKG_BUILD_DIR)/firmware/cyfmac4373-sdio.bin \
 		$(1)/lib/firmware/brcm/brcmfmac4373-sdio.bin
 	$(INSTALL_DATA) \
-		$(PKG_BUILD_DIR)/firmware/brcmfmac4373-sdio.clm_blob \
+		$(PKG_BUILD_DIR)/firmware/cyfmac4373-sdio.clm_blob \
 		$(1)/lib/firmware/brcm/brcmfmac4373-sdio.clm_blob
 endef
 
@@ -272,10 +235,10 @@ endef
 define Package/cypress-firmware-4373-usb/install
 	$(INSTALL_DIR) $(1)/lib/firmware/brcm
 	$(INSTALL_DATA) \
-		$(PKG_BUILD_DIR)/firmware/brcmfmac4373-usb.bin \
+		$(PKG_BUILD_DIR)/firmware/cyfmac4373-usb.bin \
 		$(1)/lib/firmware/brcm/brcmfmac4373-usb.bin
 	$(INSTALL_DATA) \
-		$(PKG_BUILD_DIR)/firmware/brcmfmac4373.clm_blob \
+		$(PKG_BUILD_DIR)/firmware/cyfmac4373.clm_blob \
 		$(1)/lib/firmware/brcm/brcmfmac4373.clm_blob
 endef
 
@@ -290,29 +253,11 @@ endef
 define Package/cypress-firmware-54591-pcie/install
 	$(INSTALL_DIR) $(1)/lib/firmware/brcm
 	$(INSTALL_DATA) \
-		$(PKG_BUILD_DIR)/firmware/brcmfmac54591-pcie.bin \
+		$(PKG_BUILD_DIR)/firmware/cyfmac54591-pcie.bin \
 		$(1)/lib/firmware/brcm/brcmfmac54591-pcie.bin
 	$(INSTALL_DATA) \
-		$(PKG_BUILD_DIR)/firmware/brcmfmac54591-pcie.clm_blob \
+		$(PKG_BUILD_DIR)/firmware/cyfmac54591-pcie.clm_blob \
 		$(1)/lib/firmware/brcm/brcmfmac54591-pcie.clm_blob
 endef
 
 $(eval $(call BuildPackage,cypress-firmware-54591-pcie))
-
-# Cypress 89459 PCIe Firmware
-define Package/cypress-firmware-89459-pcie
-  $(Package/cypress-firmware-default)
-  TITLE:=CYW89459 FullMac PCIe firmware
-endef
-
-define Package/cypress-firmware-89459-pcie/install
-	$(INSTALL_DIR) $(1)/lib/firmware/brcm
-	$(INSTALL_DATA) \
-		$(PKG_BUILD_DIR)/firmware/brcmfmac89459-pcie.bin \
-		$(1)/lib/firmware/brcm/brcmfmac89459-pcie.bin
-	$(INSTALL_DATA) \
-		$(PKG_BUILD_DIR)/firmware/brcmfmac89459-pcie.clm_blob \
-		$(1)/lib/firmware/brcm/brcmfmac89459-pcie.clm_blob
-endef
-
-$(eval $(call BuildPackage,cypress-firmware-89459-pcie))

package/firmware/cypress-nvram/Makefile

@@ -18,6 +18,8 @@ PKG_SOURCE_URL:=https://github.com/openwrt/cypress-nvram.git
 
 PKG_MAINTAINER:=Álvaro Fernández Rojas <noltari@gmail.com>
 
+PKG_FLAGS:=nonshared
+
 include $(INCLUDE_DIR)/package.mk
 
 define Package/cypress-nvram-default
@@ -98,6 +100,9 @@ define Package/cypress-nvram-43455-sdio-rpi-4b/install
 	$(INSTALL_DATA) \
 		$(PKG_BUILD_DIR)/brcmfmac43455-sdio.raspberrypi,4-model-b.txt \
 		$(1)/lib/firmware/brcm/brcmfmac43455-sdio.raspberrypi,4-model-b.txt
+	$(INSTALL_DATA) \
+		$(PKG_BUILD_DIR)/brcmfmac43455-sdio.raspberrypi,4-model-b.txt \
+		$(1)/lib/firmware/brcm/brcmfmac43455-sdio.raspberrypi,4-compute-module.txt
 endef
 
 $(eval $(call BuildPackage,cypress-nvram-43455-sdio-rpi-4b))

package/firmware/intel-microcode/Makefile

@@ -8,13 +8,14 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=intel-microcode
-PKG_VERSION:=20200616
+PKG_VERSION:=20220809
 PKG_RELEASE:=1
 
-PKG_SOURCE:=intel-microcode_3.$(PKG_VERSION).$(PKG_RELEASE).tar.xz
+PKG_SOURCE:=intel-microcode_3.$(PKG_VERSION).1.tar.xz
 PKG_SOURCE_URL:=http://ftp.debian.org/debian/pool/non-free/i/intel-microcode/
-PKG_HASH:=bcc3b81c452fe4649a948c022475d76c1cdfbb730f36749a082f412f1406a3b9
+PKG_HASH:=4cf6c3638bb52d9d45c1916af866fd0929628a6f459daac3edfd369149e9c665
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-3.$(PKG_VERSION).$(PKG_RELEASE)
+PKG_BUILD_DIR:=$(BUILD_DIR)/intel-microcode-3.$(PKG_VERSION).1
+PKG_CPE_ID:=cpe:/a:intel:microcode
 
 PKG_BUILD_DEPENDS:=iucode-tool/host
 
@@ -24,6 +25,8 @@ else
 	MICROCODE:="intel-microcode"
 endif
 
+PKG_FLAGS:=nonshared
+
 include $(INCLUDE_DIR)/package.mk
 
 define Package/intel-microcode

package/firmware/ipq-wifi/Makefile

@@ -43,6 +43,8 @@ ALLWIFIBOARDS:= \
 	linksys_ea8300 \
 	linksys_mr8300-v0 \
 	luma_wrtq-329acn \
+	mikrotik_hap-ac2 \
+	mikrotik_sxtsq-5-ac \
 	mobipromo_cm520-79f \
 	nec_wg2600hp3 \
 	plasmacloud_pa1200 \
@@ -126,6 +128,8 @@ $(eval $(call generate-ipq-wifi-package,glinet_gl-s1300,GL.iNet GL-S1300))
 $(eval $(call generate-ipq-wifi-package,linksys_ea8300,Linksys EA8300))
 $(eval $(call generate-ipq-wifi-package,linksys_mr8300-v0,Linksys MR8300))
 $(eval $(call generate-ipq-wifi-package,luma_wrtq-329acn,Luma WRTQ-329ACN))
+$(eval $(call generate-ipq-wifi-package,mikrotik_hap-ac2,Mikrotik hAP ac2))
+$(eval $(call generate-ipq-wifi-package,mikrotik_sxtsq-5-ac,MikroTik SXTsq 5 ac))
 $(eval $(call generate-ipq-wifi-package,mobipromo_cm520-79f,MobiPromo CM520-79F))
 $(eval $(call generate-ipq-wifi-package,nec_wg2600hp3,NEC Platforms WG2600HP3))
 $(eval $(call generate-ipq-wifi-package,plasmacloud_pa1200,Plasma Cloud PA1200))

package/firmware/layerscape/fman-ucode/Makefile

@@ -16,6 +16,8 @@ PKG_SOURCE_URL:=https://github.com/NXP/qoriq-fm-ucode.git
 PKG_SOURCE_VERSION:=c275e91392e2adab1ed22f3867b8269ca3c54014
 PKG_MIRROR_HASH:=90b619ed501462b92f34f2fabfa09d6aaa5235990891d1c3132821c7d18a39bd
 
+PKG_FLAGS:=nonshared
+
 include $(INCLUDE_DIR)/package.mk
 
 define Package/layerscape-fman

package/firmware/layerscape/ls-ddr-phy/Makefile

@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+#
+# Copyright 2020 NXP
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=ls-ddr-phy
+PKG_VERSION:=LSDK-20.04-update-290520
+PKG_RELEASE:=$(AUTORELEASE)
+
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_URL:=https://github.com/NXP/ddr-phy-binary.git
+PKG_SOURCE_VERSION:=fbc036b88acb6c06ffed02c898cbae9856ec75ba
+PKG_MIRROR_HASH:=84e2bdea99384211971bb23ba9ed18b5839628ff2aa0738d2978bbdf841638cb
+PKG_BUILD_DEPENDS:=tfa-layerscape/host
+
+PKG_LICENSE:=EULA
+PKG_LICENSE_FILES:=NXP-Binary-EULA.txt
+
+PKG_FLAGS:=nonshared
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/layerscape-ddr-phy
+  SECTION:=firmware
+  CATEGORY:=Firmware
+  TITLE:=NXP Layerscape DDR PHY firmware
+  DEPENDS:=@TARGET_layerscape
+endef
+
+define Build/Compile
+	cd $(PKG_BUILD_DIR)/lx2160a/ && \
+	fiptool-layerscape create \
+		--ddr-immem-udimm-1d ddr4_pmu_train_imem.bin \
+		--ddr-immem-udimm-2d ddr4_2d_pmu_train_imem.bin \
+		--ddr-dmmem-udimm-1d ddr4_pmu_train_dmem.bin \
+		--ddr-dmmem-udimm-2d ddr4_2d_pmu_train_dmem.bin \
+		--ddr-immem-rdimm-1d ddr4_rdimm_pmu_train_imem.bin \
+		--ddr-immem-rdimm-2d ddr4_rdimm2d_pmu_train_imem.bin \
+		--ddr-dmmem-rdimm-1d ddr4_rdimm_pmu_train_dmem.bin \
+		--ddr-dmmem-rdimm-2d ddr4_rdimm2d_pmu_train_dmem.bin \
+		fip_ddr_all.bin
+endef
+
+define Build/InstallDev
+	$(INSTALL_DIR) $(STAGING_DIR_IMAGE)
+	$(CP) $(PKG_BUILD_DIR)/lx2160a/fip_ddr_all.bin \
+		$(STAGING_DIR_IMAGE)/fsl_lx2160a-rdb-fip_ddr_all.bin
+endef
+
+$(eval $(call BuildPackage,layerscape-ddr-phy))

package/firmware/layerscape/ls-dpl/Makefile

@@ -9,13 +9,15 @@ include $(TOPDIR)/rules.mk
 
 PKG_NAME:=ls-dpl
 PKG_VERSION:=LSDK-20.04
-PKG_RELEASE:=2
+PKG_RELEASE:=$(AUTORELEASE)
 
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://source.codeaurora.org/external/qoriq/qoriq-components/mc-utils
 PKG_SOURCE_VERSION:=8672a5f5abcd3a354dcab07e03f2a8a69b2e962d
 PKG_MIRROR_HASH:=4b8ad3148aee1e0c034206543472aebb435655fd03a661c4c1be545dcac7ddf0
 
+PKG_FLAGS:=nonshared
+
 include $(INCLUDE_DIR)/package.mk
 include $(INCLUDE_DIR)/kernel.mk
 
@@ -40,6 +42,10 @@ define Build/InstallDev
 		$(STAGING_DIR_IMAGE)/fsl_ls2088a-rdb-dpl.dtb
 	$(CP) $(PKG_BUILD_DIR)/config/ls2088a/RDB/dpc.0x2A_0x41.dtb \
 		$(STAGING_DIR_IMAGE)/fsl_ls2088a-rdb-dpc.dtb
+	$(CP) $(PKG_BUILD_DIR)/config/lx2160a/RDB/dpl-eth.19.dtb \
+		$(STAGING_DIR_IMAGE)/fsl_lx2160a-rdb-dpl.dtb
+	$(CP) $(PKG_BUILD_DIR)/config/lx2160a/RDB/dpc-usxgmii.dtb \
+		$(STAGING_DIR_IMAGE)/fsl_lx2160a-rdb-dpc.dtb
 endef
 
 $(eval $(call BuildPackage,layerscape-dpl))

package/firmware/layerscape/ls-mc/Makefile

@@ -9,13 +9,15 @@ include $(TOPDIR)/rules.mk
 
 PKG_NAME:=ls-mc
 PKG_VERSION:=LSDK-20.04
-PKG_RELEASE:=2
+PKG_RELEASE:=$(AUTORELEASE)
 
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://github.com/NXP/qoriq-mc-binary.git
 PKG_SOURCE_VERSION:=f73683596a7b72124d67b62e64f3dc2bb36b9321
 PKG_MIRROR_HASH:=1cba30c2a6814763c3e155c1cc5fa21998bb6ad5814fcb09e99f98bf36f65d9e
 
+PKG_FLAGS:=nonshared
+
 include $(INCLUDE_DIR)/package.mk
 
 define Package/layerscape-mc
@@ -34,6 +36,8 @@ define Build/InstallDev
 		$(STAGING_DIR_IMAGE)/fsl_ls1088a-rdb-mc.itb
 	$(CP) $(PKG_BUILD_DIR)/ls2088a/mc_10.20.4_ls2088a.itb \
 		$(STAGING_DIR_IMAGE)/fsl_ls2088a-rdb-mc.itb
+	$(CP) $(PKG_BUILD_DIR)/lx2160a/mc_10.20.4_lx2160a.itb \
+		$(STAGING_DIR_IMAGE)/fsl_lx2160a-rdb-mc.itb
 endef
 
 $(eval $(call BuildPackage,layerscape-mc))

package/firmware/layerscape/ls-rcw/Makefile

@@ -9,13 +9,15 @@ include $(TOPDIR)/rules.mk
 
 PKG_NAME:=ls-rcw
 PKG_VERSION:=LSDK-20.04-update-290520
-PKG_RELEASE:=2
+PKG_RELEASE:=$(AUTORELEASE)
 
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://source.codeaurora.org/external/qoriq/qoriq-components/rcw
 PKG_SOURCE_VERSION:=e0fab6d9b61003caef577f7474c2fac61e6ba2ff
 PKG_MIRROR_HASH:=b6bc66e27b7c6db31101fdc2e6be7255181861bd38d8f25eb5eb80c468983eb2
 
+PKG_FLAGS:=nonshared
+
 include $(INCLUDE_DIR)/package.mk
 
 define Package/layerscape-rcw
@@ -31,11 +33,15 @@ BOARDS := \
   ls1012a-frwy-sdboot \
   ls1043a-rdb \
   ls1043a-rdb-sdboot \
+  ls1046a-frwy \
+  ls1046a-frwy-sdboot \
   ls1046a-rdb \
   ls1046a-rdb-sdboot \
   ls1088a-rdb \
   ls1088a-rdb-sdboot \
   ls2088a-rdb \
+  lx2160a-rdb \
+  lx2160a-rdb-sdboot \
   ls1021a-twr
 
 RCW_ls1012a-rdb         :=ls1012ardb/R_SPNH_3508/rcw_1000_default.bin
@@ -43,11 +49,15 @@ RCW_ls1012a-frdm        :=ls1012afrdm/N_SSNP_3305/rcw_800.bin
 RCW_ls1012a-frwy-sdboot :=ls1012afrwy/N_SSNP_3305/rcw_1000_default.bin
 RCW_ls1043a-rdb         :=ls1043ardb/RR_FQPP_1455/rcw_1600.bin
 RCW_ls1043a-rdb-sdboot  :=ls1043ardb/RR_FQPP_1455/rcw_1600_sdboot.bin
+RCW_ls1046a-frwy        :=ls1046afrwy/NN_NNQNNPNP_3040_0506/rcw_1600_qspiboot.bin
+RCW_ls1046a-frwy-sdboot :=ls1046afrwy/NN_NNQNNPNP_3040_0506/rcw_1600_sdboot.bin
 RCW_ls1046a-rdb         :=ls1046ardb/RR_FFSSPPPH_1133_5559/rcw_1800_qspiboot.bin
 RCW_ls1046a-rdb-sdboot  :=ls1046ardb/RR_FFSSPPPH_1133_5559/rcw_1800_sdboot.bin
 RCW_ls1088a-rdb         :=ls1088ardb/FCQQQQQQQQ_PPP_H_0x1d_0x0d/rcw_1600_qspi.bin
 RCW_ls1088a-rdb-sdboot  :=ls1088ardb/FCQQQQQQQQ_PPP_H_0x1d_0x0d/rcw_1600_sd.bin
 RCW_ls2088a-rdb         :=ls2088ardb/FFFFFFFF_PP_HH_0x2a_0x41/rcw_1800.bin
+RCW_lx2160a-rdb         :=lx2160ardb_rev2/XGGFF_PP_HHHH_RR_19_5_2/rcw_2000_700_2900_19_5_2.bin
+RCW_lx2160a-rdb-sdboot  :=lx2160ardb_rev2/XGGFF_PP_HHHH_RR_19_5_2/rcw_2000_700_2900_19_5_2.bin
 RCW_ls1021a-twr         :=ls1021atwr/SSR_PNS_30/rcw_1200.bin
 
 define Build/InstallDev

package/firmware/layerscape/ppfe-firmware/Makefile

@@ -16,6 +16,8 @@ PKG_SOURCE_URL:=https://github.com/NXP/qoriq-engine-pfe-bin.git
 PKG_SOURCE_VERSION:=d3a8ef0760c54ddc243039c86389497e37be90ab
 PKG_MIRROR_HASH:=64be93b8249d298e7b5fd0846787835f0659b6ab6c55b40b809366c79e272eb8
 
+PKG_FLAGS:=nonshared
+
 include $(INCLUDE_DIR)/package.mk
 
 RSTRIP:=:

package/firmware/linux-firmware/Makefile

@@ -8,12 +8,12 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=linux-firmware
-PKG_VERSION:=20201118
+PKG_VERSION:=20211216
-PKG_RELEASE:=3
+PKG_RELEASE:=1
 
 PKG_SOURCE_URL:=@KERNEL/linux/kernel/firmware
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.xz
-PKG_HASH:=863d5a31da725b856a917280d1e3014929b3bc3d4e6e5faecf530c13afb7e2b9
+PKG_HASH:=eeddb4e6bef31fd1a3757f12ccc324929bbad97855c0b9ec5ed780f74de1837d
 
 PKG_MAINTAINER:=Felix Fietkau <nbd@nbd.name>
 

package/firmware/linux-firmware/amd.mk

@@ -0,0 +1,29 @@
+Package/amd64-microcode = $(call Package/firmware-default,AMD64 CPU microcode,@TARGET_x86)
+define Package/amd64-microcode/install
+	$(INSTALL_DIR) $(1)/lib/firmware/amd-ucode
+	$(CP) \
+		$(PKG_BUILD_DIR)/amd-ucode/*.bin \
+		$(1)/lib/firmware/amd-ucode
+endef
+
+$(eval $(call BuildPackage,amd64-microcode))
+
+Package/amdgpu-firmware = $(call Package/firmware-default,AMDGPU Video Driver firmware)
+define Package/amdgpu-firmware/install
+	$(INSTALL_DIR) $(1)/lib/firmware/amdgpu
+	$(CP) \
+		$(PKG_BUILD_DIR)/amdgpu/*.bin \
+		$(1)/lib/firmware/amdgpu
+endef
+
+$(eval $(call BuildPackage,amdgpu-firmware))
+
+Package/radeon-firmware = $(call Package/firmware-default,Radeon Video Driver firmware)
+define Package/radeon-firmware/install
+	$(INSTALL_DIR) $(1)/lib/firmware/radeon
+	$(CP) \
+		$(PKG_BUILD_DIR)/radeon/*.bin \
+		$(1)/lib/firmware/radeon
+endef
+
+$(eval $(call BuildPackage,radeon-firmware))

package/firmware/linux-firmware/amdgpu.mk

@@ -1,9 +0,0 @@
-Package/amdgpu-firmware = $(call Package/firmware-default,AMDGPU Video Driver firmware)
-define Package/amdgpu-firmware/install
-	$(INSTALL_DIR) $(1)/lib/firmware/amdgpu
-	$(CP) \
-		$(PKG_BUILD_DIR)/amdgpu/*.bin \
-		$(1)/lib/firmware/amdgpu
-endef
-
-$(eval $(call BuildPackage,amdgpu-firmware))

package/firmware/linux-firmware/broadcom.mk

@@ -34,24 +34,6 @@ define Package/brcmfmac-firmware-4329-sdio/install
 endef
 $(eval $(call BuildPackage,brcmfmac-firmware-4329-sdio))
 
-Package/brcmfmac-firmware-43362-sdio = $(call Package/firmware-default,Broadcom BCM43362 FullMac SDIO firmware)
-define Package/brcmfmac-firmware-43362-sdio/install
-	$(INSTALL_DIR) $(1)/lib/firmware/brcm
-	$(INSTALL_DATA) \
-		$(PKG_BUILD_DIR)/brcm/brcmfmac43362-sdio.bin \
-		$(1)/lib/firmware/brcm/brcmfmac43362-sdio.bin
-endef
-$(eval $(call BuildPackage,brcmfmac-firmware-43362-sdio))
-
-Package/brcmfmac-firmware-43430-sdio = $(call Package/firmware-default,Broadcom BCM43430 FullMac SDIO firmware)
-define Package/brcmfmac-firmware-43430-sdio/install
-	$(INSTALL_DIR) $(1)/lib/firmware/brcm
-	$(INSTALL_DATA) \
-		$(PKG_BUILD_DIR)/brcm/brcmfmac43430-sdio.bin \
-		$(1)/lib/firmware/brcm/brcmfmac43430-sdio.bin
-endef
-$(eval $(call BuildPackage,brcmfmac-firmware-43430-sdio))
-
 Package/brcmfmac-firmware-43430-sdio-rpi-3b = $(call Package/firmware-default,Broadcom BCM43430 NVRAM for Raspberry Pi 3B)
 define Package/brcmfmac-firmware-43430-sdio-rpi-3b/install
 	$(INSTALL_DIR) $(1)/lib/firmware/brcm
@@ -79,15 +61,6 @@ define Package/brcmfmac-firmware-43430a0-sdio/install
 endef
 $(eval $(call BuildPackage,brcmfmac-firmware-43430a0-sdio))
 
-Package/brcmfmac-firmware-43455-sdio = $(call Package/firmware-default,Broadcom BCM43455 FullMac SDIO firmware)
-define Package/brcmfmac-firmware-43455-sdio/install
-	$(INSTALL_DIR) $(1)/lib/firmware/brcm
-	$(INSTALL_DATA) \
-		$(PKG_BUILD_DIR)/brcm/brcmfmac43455-sdio.bin \
-		$(1)/lib/firmware/brcm/brcmfmac43455-sdio.bin
-endef
-$(eval $(call BuildPackage,brcmfmac-firmware-43455-sdio))
-
 Package/brcmfmac-firmware-43455-sdio-rpi-3b-plus = $(call Package/firmware-default,Broadcom BCM43455 NVRAM for Raspberry Pi 3B+)
 define Package/brcmfmac-firmware-43455-sdio-rpi-3b-plus/install
 	$(INSTALL_DIR) $(1)/lib/firmware/brcm

package/firmware/linux-firmware/qca_ath10k.mk

@@ -26,6 +26,23 @@ define Package/ath10k-firmware-qca4019/install
 endef
 $(eval $(call BuildPackage,ath10k-firmware-qca4019))
 
+Package/ath10k-board-qca9377 = $(call Package/firmware-default,ath10k qca9377 board firmware)
+define Package/ath10k-board-qca9377/install
+	$(INSTALL_DIR) $(1)/lib/firmware/ath10k/QCA9377/hw1.0
+	$(INSTALL_DATA) \
+		$(PKG_BUILD_DIR)/ath10k/QCA9377/hw1.0/board-2.bin \
+		$(1)/lib/firmware/ath10k/QCA9377/hw1.0/
+endef
+$(eval $(call BuildPackage,ath10k-board-qca9377))
+Package/ath10k-firmware-qca9377 = $(call Package/firmware-default,ath10k qca9377 firmware,+ath10k-board-qca9377)
+define Package/ath10k-firmware-qca9377/install
+	$(INSTALL_DIR) $(1)/lib/firmware/ath10k/QCA9377/hw1.0
+	$(INSTALL_DATA) \
+		$(PKG_BUILD_DIR)/ath10k/QCA9377/hw1.0/firmware-6.bin \
+		$(1)/lib/firmware/ath10k/QCA9377/hw1.0/firmware-6.bin
+endef
+$(eval $(call BuildPackage,ath10k-firmware-qca9377))
+
 Package/ath10k-board-qca9887 = $(call Package/firmware-default,ath10k qca9887 board firmware)
 define Package/ath10k-board-qca9887/install
 	$(INSTALL_DIR) $(1)/lib/firmware/ath10k/QCA9887/hw1.0

package/firmware/linux-firmware/radeon.mk

@@ -1,9 +0,0 @@
-Package/radeon-firmware = $(call Package/firmware-default,Radeon Video Driver firmware)
-define Package/radeon-firmware/install
-	$(INSTALL_DIR) $(1)/lib/firmware/radeon
-	$(CP) \
-		$(PKG_BUILD_DIR)/radeon/*.bin \
-		$(1)/lib/firmware/radeon
-endef
-
-$(eval $(call BuildPackage,radeon-firmware))

package/firmware/linux-firmware/realtek.mk

@@ -76,16 +76,10 @@ Package/rtl8723bu-firmware = $(call Package/firmware-default,RealTek RTL8723BU f
 define Package/rtl8723bu-firmware/install
 	$(INSTALL_DIR) $(1)/lib/firmware/rtlwifi
 	$(INSTALL_DATA) $(PKG_BUILD_DIR)/rtlwifi/rtl8723bu_nic.bin $(1)/lib/firmware/rtlwifi
+	ln -s rtl8723bu_nic.bin $(1)/lib/firmware/rtlwifi/rtl8723bs_nic.bin
 endef
 $(eval $(call BuildPackage,rtl8723bu-firmware))
 
-Package/rtl8723bs-firmware = $(call Package/firmware-default,RealTek RTL8723BS firmware)
-define Package/rtl8723bs-firmware/install
-	$(INSTALL_DIR) $(1)/lib/firmware/rtlwifi
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/rtlwifi/rtl8723bs*.bin $(1)/lib/firmware/rtlwifi
-endef
-$(eval $(call BuildPackage,rtl8723bs-firmware))
-
 Package/rtl8821ae-firmware = $(call Package/firmware-default,RealTek RTL8821AE firmware)
 define Package/rtl8821ae-firmware/install
 	$(INSTALL_DIR) $(1)/lib/firmware/rtlwifi