From: Nitheesh Sekar Subject: [PATCH] arm64: dts: qcom: ipq5018: Add PCIe related nodes Date: Tue, 3 Oct 2023 17:38:45 +0530 Add phy and controller nodes for PCIe0 and PCIe1. PCIe0 is 2-lane Gen2 and PCIe1 is 1-lane Gen2. Signed-off-by: Nitheesh Sekar Signed-off-by: George Moussalem --- arch/arm64/boot/dts/qcom/ipq5018.dtsi | 186 +++++++++++++++++++++++++- 1 file changed, 184 insertions(+), 2 deletions(-) --- a/arch/arm64/boot/dts/qcom/ipq5018.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq5018.dtsi @@ -149,6 +149,42 @@ status = "disabled"; }; + pcie1_phy: phy@7e000{ + compatible = "qcom,ipq5018-uniphy-pcie-phy"; + reg = <0x0007e000 0x800>; + + clocks = <&gcc GCC_PCIE1_PIPE_CLK>; + + resets = <&gcc GCC_PCIE1_PHY_BCR>, + <&gcc GCC_PCIE1PHY_PHY_BCR>; + + #clock-cells = <0>; + + #phy-cells = <0>; + + num-lanes = <1>; + + status = "disabled"; + }; + + pcie0_phy: phy@86000{ + compatible = "qcom,ipq5018-uniphy-pcie-phy"; + reg = <0x00086000 0x800>; + + clocks = <&gcc GCC_PCIE0_PIPE_CLK>; + + resets = <&gcc GCC_PCIE0_PHY_BCR>, + <&gcc GCC_PCIE0PHY_PHY_BCR>; + + #clock-cells = <0>; + + #phy-cells = <0>; + + num-lanes = <2>; + + status = "disabled"; + }; + qfprom: qfprom@a0000 { compatible = "qcom,ipq5018-qfprom", "qcom,qfprom"; reg = <0xa0000 0x1000>; @@ -283,8 +319,8 @@ reg = <0x01800000 0x80000>; clocks = <&xo_board_clk>, <&sleep_clk>, - <0>, - <0>, + <&pcie0_phy>, + <&pcie1_phy>, <0>, <0>, <0>, @@ -501,6 +537,146 @@ status = "disabled"; }; }; + + pcie1: pcie@80000000 { + compatible = "qcom,pcie-ipq5018"; + reg = <0x80000000 0xf1d>, + <0x80000f20 0xa8>, + <0x80001000 0x1000>, + <0x00078000 0x3000>, + <0x80100000 0x1000>; + reg-names = "dbi", + "elbi", + "atu", + "parf", + "config"; + device_type = "pci"; + linux,pci-domain = <0>; + bus-range = <0x00 0xff>; + num-lanes = <1>; + max-link-speed = <2>; + #address-cells = <3>; + #size-cells = <2>; + + phys = <&pcie1_phy>; + phy-names ="pciephy"; + + ranges = <0x81000000 0 0x80200000 0x80200000 0 0x00100000>, /* I/O */ + <0x82000000 0 0x80300000 0x80300000 0 0x10000000>; /* MEM */ + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 142 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 143 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 144 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 145 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + interrupts = ; + interrupt-names = "global_irq"; + + clocks = <&gcc GCC_SYS_NOC_PCIE1_AXI_CLK>, + <&gcc GCC_PCIE1_AXI_M_CLK>, + <&gcc GCC_PCIE1_AXI_S_CLK>, + <&gcc GCC_PCIE1_AHB_CLK>, + <&gcc GCC_PCIE1_AUX_CLK>, + <&gcc GCC_PCIE1_AXI_S_BRIDGE_CLK>; + clock-names = "iface", + "axi_m", + "axi_s", + "ahb", + "aux", + "axi_bridge"; + + resets = <&gcc GCC_PCIE1_PIPE_ARES>, + <&gcc GCC_PCIE1_SLEEP_ARES>, + <&gcc GCC_PCIE1_CORE_STICKY_ARES>, + <&gcc GCC_PCIE1_AXI_MASTER_ARES>, + <&gcc GCC_PCIE1_AXI_SLAVE_ARES>, + <&gcc GCC_PCIE1_AHB_ARES>, + <&gcc GCC_PCIE1_AXI_MASTER_STICKY_ARES>, + <&gcc GCC_PCIE1_AXI_SLAVE_STICKY_ARES>; + reset-names = "pipe", + "sleep", + "sticky", + "axi_m", + "axi_s", + "ahb", + "axi_m_sticky", + "axi_s_sticky"; + + msi-map = <0x0 &v2m0 0x0 0xff8>; + status = "disabled"; + }; + + pcie0: pcie@a0000000 { + compatible = "qcom,pcie-ipq5018"; + reg = <0xa0000000 0xf1d>, + <0xa0000f20 0xa8>, + <0xa0001000 0x1000>, + <0x00080000 0x3000>, + <0xa0100000 0x1000>; + reg-names = "dbi", + "elbi", + "atu", + "parf", + "config"; + device_type = "pci"; + linux,pci-domain = <1>; + bus-range = <0x00 0xff>; + num-lanes = <2>; + max-link-speed = <2>; + #address-cells = <3>; + #size-cells = <2>; + + phys = <&pcie0_phy>; + phy-names ="pciephy"; + + ranges = <0x81000000 0 0xa0200000 0xa0200000 0 0x00100000>, /* I/O */ + <0x82000000 0 0xa0300000 0xa0300000 0 0x10000000>; /* MEM */ + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 75 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 78 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 79 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 83 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + interrupts = ; + interrupt-names = "global_irq"; + + clocks = <&gcc GCC_SYS_NOC_PCIE0_AXI_CLK>, + <&gcc GCC_PCIE0_AXI_M_CLK>, + <&gcc GCC_PCIE0_AXI_S_CLK>, + <&gcc GCC_PCIE0_AHB_CLK>, + <&gcc GCC_PCIE0_AUX_CLK>, + <&gcc GCC_PCIE0_AXI_S_BRIDGE_CLK>; + clock-names = "iface", + "axi_m", + "axi_s", + "ahb", + "aux", + "axi_bridge"; + + resets = <&gcc GCC_PCIE0_PIPE_ARES>, + <&gcc GCC_PCIE0_SLEEP_ARES>, + <&gcc GCC_PCIE0_CORE_STICKY_ARES>, + <&gcc GCC_PCIE0_AXI_MASTER_ARES>, + <&gcc GCC_PCIE0_AXI_SLAVE_ARES>, + <&gcc GCC_PCIE0_AHB_ARES>, + <&gcc GCC_PCIE0_AXI_MASTER_STICKY_ARES>, + <&gcc GCC_PCIE0_AXI_SLAVE_STICKY_ARES>; + reset-names = "pipe", + "sleep", + "sticky", + "axi_m", + "axi_s", + "ahb", + "axi_m_sticky", + "axi_s_sticky"; + + msi-map = <0x0 &v2m0 0x0 0xff8>; + status = "disabled"; + }; }; thermal-zones {