Update QCA Source

package/boot/uboot-tools/uboot-envtools/files/qualcommax_ipq60xx

@@ -38,7 +38,7 @@ glinet,gl-axt1800|\
 netgear,wax214|\
 netgear,wax610|\
 netgear,wax610y|\
-tplink,eap610-outdoor|\
+tplink,eap610od|\
 tplink,eap623od-hd-v1)
 	ubootenv_add_mtd "0:appsblenv" "0x0" "0x40000" "0x20000"
 	;;

package/firmware/ipq-wifi/Makefile

@@ -66,7 +66,7 @@ ALLWIFIBOARDS:= \
 	redmi_ax6 \
 	skspruce_wia3300-20 \
 	spectrum_sax1v1k \
-	tplink_eap610-outdoor \
+	tplink_eap610od \
 	tplink_eap620hd-v1 \
 	tplink_eap623od-hd-v1 \
 	tplink_eap660hd-v1 \
@@ -225,7 +225,7 @@ $(eval $(call generate-ipq-wifi-package,prpl_haze,prpl Haze))
 $(eval $(call generate-ipq-wifi-package,redmi_ax6,Redmi AX6))
 $(eval $(call generate-ipq-wifi-package,skspruce_wia3300-20,SKSpruce WIA3300-20))
 $(eval $(call generate-ipq-wifi-package,spectrum_sax1v1k,Spectrum SAX1V1K))
-$(eval $(call generate-ipq-wifi-package,tplink_eap610-outdoor,TPLink EAP610-Outdoor))
+$(eval $(call generate-ipq-wifi-package,tplink_eap610od,TPLink EAP610-Outdoor))
 $(eval $(call generate-ipq-wifi-package,tplink_eap620hd-v1,TP-Link EAP620 HD v1))
 $(eval $(call generate-ipq-wifi-package,tplink_eap623od-hd-v1,TP-Link EAP623-Outdoor HD v1))
 $(eval $(call generate-ipq-wifi-package,tplink_eap660hd-v1,TP-Link EAP660 HD v1))

target/linux/qualcommax/base-files/lib/preinit/09_mount_factory_data

@@ -7,10 +7,10 @@ preinit_mount_factory_data() {
 	. /lib/functions/system.sh
 
 	case $(board_name) in
-	tplink,eap610-outdoor|\
+	tplink,eap610od|\
+	tplink,eap623od-hd-v1|\
 	tplink,eap620hd-v1|\
-	tplink,eap660hd-v1|\
+	tplink,eap660hd-v1)
-	tplink,eap623od-hd-v1)
 		mtd_path=$(find_mtd_chardev "factory_data")
 		ubiattach --dev-path="$mtd_path" --devn=1
 		mkdir /tmp/factory_data

target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq6000-eap610od.dts

@@ -0,0 +1,52 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+/dts-v1/;
+
+#include "ipq6000-tplink.dtsi"
+
+/ {
+	model = "TP-Link EAP610-Outdoor";
+	compatible = "tplink,eap610od", "qcom,ipq6018";
+
+	leds {
+		compatible = "gpio-leds";
+
+		led_sys_amber: sys-amber {
+			color = <LED_COLOR_ID_AMBER>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&tlmm 35 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio-restart {
+		compatible = "gpio-restart";
+		gpios = <&tlmm 61 GPIO_ACTIVE_LOW>;
+		open-source;
+	};
+};
+
+&tlmm {
+	led_enable {
+		gpio-hog;
+		output-high;
+		gpios = <36 GPIO_ACTIVE_HIGH>;
+		line-name = "enable-leds";
+	};
+};
+
+&qpic_nand {
+	status = "okay";
+
+	nand@0 {
+		reg = <0>;
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
+		nand-bus-width = <8>;
+	};
+};
+
+&wifi {
+	status = "okay";
+	qcom,ath11k-fw-memory-mode = <1>;
+	qcom,ath11k-calibration-variant = "TP-Link-EAP610-Outdoor";
+};

target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq6000-eap623od-hd-v1.dts

@@ -0,0 +1,49 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+/dts-v1/;
+
+#include "ipq6000-tplink.dtsi"
+
+/ {
+	model = "TP-Link EAP623-Outdoor HD V1.0";
+	compatible = "tplink,eap623od-hd-v1", "qcom,ipq6018";
+
+	leds {
+		compatible = "gpio-leds";
+
+		led_sys_wlan: sys-wlan {
+			color = <LED_COLOR_ID_YELLOW>;
+			function = LED_FUNCTION_WLAN;
+			gpios = <&tlmm 32 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&tlmm {
+	phy_pins: phy-reset-pin {
+		pins = "gpio77";
+		function = "gpio";
+		bias-pull-up;
+	};
+};
+
+&qpic_nand {
+	status = "okay";
+
+	nand@0 {
+		reg = <0>;
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
+		nand-bus-width = <8>;
+
+		partitions {
+			compatible = "qcom,smem-part";
+		};
+	};
+};
+
+&wifi {
+	status = "okay";
+	qcom,ath11k-fw-memory-mode = <1>;
+	qcom,ath11k-calibration-variant = "TPLink-EAP623-Outdoor-HD-v1";
+};

target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq6000-tplink.dtsi

@@ -1,7 +1,5 @@
 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 
-/dts-v1/;
-
 #include "ipq6018.dtsi"
 #include "ipq6018-ess.dtsi"
 #include "ipq6018-nss.dtsi"
@@ -13,20 +11,17 @@
 #include <dt-bindings/leds/common.h>
 
 / {
-	model = "TP-Link EAP610-Outdoor";
-	compatible = "tplink,eap610-outdoor", "qcom,ipq6018";
-
 	aliases {
 		serial0 = &blsp1_uart3;
 		led-boot = &led_sys_green;
-		led-failsafe = &led_sys_amber;
+		led-failsafe = &led_sys_green;
 		led-running = &led_sys_green;
-		led-upgrade = &led_sys_amber;
+		led-upgrade = &led_sys_green;
 	};
 
 	chosen {
 		stdout-path = "serial0:115200n8";
-		bootargs-append = " ubi.block=0,rootfs root=/dev/ubiblock0_1";
+		bootargs-append = " root=/dev/ubiblock0_1";
 	};
 
 	keys {
@@ -42,24 +37,12 @@
 	leds {
 		compatible = "gpio-leds";
 
-		led_sys_amber: sys-amber {
-			function = "system";
-			color = <LED_COLOR_ID_AMBER>;
-			gpios = <&tlmm 35 GPIO_ACTIVE_HIGH>;
-		};
-
 		led_sys_green: sys-green {
-			function = "system";
 			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_STATUS;
 			gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>;
 		};
 	};
-
-	gpio-restart {
-		compatible = "gpio-restart";
-		gpios = <&tlmm 61 GPIO_ACTIVE_LOW>;
-		open-source;
-	};
 };
 
 &tlmm {
@@ -78,13 +61,6 @@
 			bias-pull-up;
 		};
 	};
-
-	led_enable {
-		gpio-hog;
-		output-high;
-		gpios = <36 GPIO_ACTIVE_HIGH>;
-		line-name = "enable-leds";
-	};
 };
 
 &dp5 {
@@ -98,13 +74,17 @@
 };
 
 &mdio {
+	status = "okay";
 	pinctrl-0 = <&mdio_pins>;
 	pinctrl-names = "default";
 	reset-gpios = <&tlmm 77 GPIO_ACTIVE_LOW>;
-	status = "okay";
 
 	rtl8211f_4: ethernet-phy@4 {
+		compatible = "ethernet-phy-id001c.c916";
 		reg = <4>;
+
+		realtek,clkout-disable;
+		realtek,aldps-enable;
 	};
 };
 
@@ -114,30 +94,10 @@
 	status = "okay";
 
 	qcom,port_phyinfo {
-		port@4 {
+		port@5 {
 			port_id = <5>;
 			phy_address = <4>;
+			port_mac_sel = "QGMAC_PORT";
 		};
 	};
 };
-
-&qpic_bam {
-	status = "okay";
-};
-
-&qpic_nand {
-	status = "okay";
-
-	nand@0 {
-		reg = <0>;
-		nand-ecc-strength = <4>;
-		nand-ecc-step-size = <512>;
-		nand-bus-width = <8>;
-	};
-};
-
-&wifi {
-	status = "okay";
-	ieee80211-freq-limit = <2402000 5835000>;
-	qcom,ath11k-calibration-variant = "TP-Link-EAP610-Outdoor";
-};

target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq6018-eap623od-hd-v1.dts

@@ -1,151 +0,0 @@
-// SPDX-License-Identifier: MIT, GPL-2.0 or later
-/* Copyright (c) 2025, Yang Xiwen <forbidden405@outlook.com> */
-
-/dts-v1/;
-
-#include "ipq6018.dtsi"
-#include "ipq6018-cp-cpu.dtsi"
-#include "ipq6018-ess.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/leds/common.h>
-
-/ {
-	model = "TP-Link EAP623-Outdoor HD V1.0";
-	compatible = "tplink,eap623od-hd-v1", "qcom,ipq6018";
-
-	aliases {
-		serial0 = &blsp1_uart3;
-		led-boot = &led_system;
-		led-failsafe = &led_system;
-		led-running = &led_system;
-		led-upgrade = &led_system;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-		bootargs-append = " root=/dev/ubiblock0_1";
-	};
-
-	keys {
-		compatible = "gpio-keys";
-
-		reset {
-			label = "reset";
-			gpios = <&tlmm 9 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led_system: system {
-			color = <LED_COLOR_ID_GREEN>;
-			function = LED_FUNCTION_STATUS;
-			gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>;
-		};
-
-		wlan {
-			color = <LED_COLOR_ID_YELLOW>;
-			function = LED_FUNCTION_WLAN;
-			gpios = <&tlmm 32 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&blsp1_uart3 {
-	pinctrl-0 = <&serial_3_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&tlmm {
-	mdio_pins: mdio-pins {
-		mdc {
-			pins = "gpio64";
-			function = "mdc";
-			drive-strength = <8>;
-			bias-pull-up;
-		};
-
-		mdio {
-			pins = "gpio65";
-			function = "mdio";
-			drive-strength = <8>;
-			bias-pull-up;
-		};
-	};
-
-	phy_pins: phy-reset-pin {
-		pins = "gpio77";
-		function = "gpio";
-		bias-pull-up;
-	};
-};
-
-&mdio {
-	status = "okay";
-	pinctrl-0 = <&mdio_pins>;
-	pinctrl-names = "default";
-
-	rtl8211f: ethernet-phy@4 {
-		compatible = "ethernet-phy-id001c.c916";
-		reg = <4>;
-		reset-gpios = <&tlmm 77 GPIO_ACTIVE_LOW>;
-		pinctrl-0 = <&phy_pins>;
-		pinctrl-names = "default";
-
-		realtek,clkout-disable;
-		realtek,aldps-enable;
-	};
-};
-
-&switch {
-	status = "okay";
-	switch_lan_bmp = <ESS_PORT5>; /* lan port bitmap */
-	switch_mac_mode1 = <MAC_MODE_SGMII_PLUS>; /* mac mode for uniphy instance0*/
-
-	qcom,port_phyinfo {
-		port@5 {
-			port_id = <5>;
-			phy_address = <4>;
-			port_mac_sel = "QGMAC_PORT";
-		};
-	};
-};
-
-&edma {
-	status = "okay";
-};
-
-&dp5 {
-	status = "okay";
-	phy-handle = <&rtl8211f>;
-	phy-mode = "sgmii";
-	label = "lan";
-};
-
-&qpic_bam {
-	status = "okay";
-};
-
-&qpic_nand {
-	status = "okay";
-
-	nand@0 {
-		reg = <0>;
-		nand-ecc-strength = <4>;
-		nand-ecc-step-size = <512>;
-		nand-bus-width = <8>;
-
-		partitions {
-			compatible = "qcom,smem-part";
-		};
-	};
-};
-
-&wifi {
-	qcom,ath11k-calibration-variant = "TPLink-EAP623-Outdoor-HD-v1";
-	status = "okay";
-};

target/linux/qualcommax/image/ipq60xx.mk

@@ -149,7 +149,7 @@ define Device/qihoo_360v6
 endef
 TARGET_DEVICES += qihoo_360v6
 
-define Device/tplink_eap610-outdoor
+define Device/tplink_eap610od
 	$(call Device/FitImage)
 	$(call Device/UbiFit)
 	DEVICE_VENDOR := TP-Link
@@ -157,7 +157,7 @@ define Device/tplink_eap610-outdoor
 	BLOCKSIZE := 128k
 	PAGESIZE := 2048
 	SOC := ipq6000
-	DEVICE_PACKAGES := ipq-wifi-tplink_eap610-outdoor
+	DEVICE_PACKAGES := ipq-wifi-tplink_eap610od kmod-phy-realtek
 	IMAGES += web-ui-factory.bin
 	IMAGE/web-ui-factory.bin := append-ubi | tplink-image-2022
 	TPLINK_SUPPORT_STRING := SupportList:\r\n \
@@ -165,7 +165,7 @@ define Device/tplink_eap610-outdoor
 		EAP610-Outdoor(TP-Link|JP|AX1800-D):1.0\r\n \
 		EAP610-Outdoor(TP-Link|CA|AX1800-D):1.0
 endef
-TARGET_DEVICES += tplink_eap610-outdoor
+TARGET_DEVICES += tplink_eap610od
 
 define Device/tplink_eap623od-hd-v1
 	$(call Device/FitImage)
@@ -175,7 +175,7 @@ define Device/tplink_eap623od-hd-v1
 	DEVICE_VARIANT := v1
 	BLOCKSIZE := 128k
 	PAGESIZE := 2048
-	SOC := ipq6018
+	SOC := ipq6000
 	DEVICE_PACKAGES := ipq-wifi-tplink_eap623od-hd-v1 kmod-phy-realtek
 	IMAGES += web-ui-factory.bin
 	IMAGE/web-ui-factory.bin := append-ubi | tplink-image-2022

target/linux/qualcommax/ipq60xx/base-files/etc/board.d/02_network

@@ -40,7 +40,7 @@ ipq60xx_setup_interfaces()
 	netgear,wax214|\
 	netgear,wax610|\
 	netgear,wax610y|\
-	tplink,eap610-outdoor|\
+	tplink,eap610od|\
 	tplink,eap623od-hd-v1)
 		ucidef_set_interface_lan "lan" "dhcp"
 		;;
@@ -63,7 +63,7 @@ ipq60xx_setup_macs()
 		lan_mac=$(macaddr_add "$wan_mac" 1)
 		label_mac=$wan_mac
 		;;
-	tplink,eap610-outdoor|\
+	tplink,eap610od|\
 	tplink,eap623od-hd-v1)
 		lan_mac=$(get_mac_binary /tmp/factory_data/default-mac 0)
 		label_mac=$lan_mac

target/linux/qualcommax/ipq60xx/base-files/etc/hotplug.d/firmware/11-ath11k-caldata

@@ -29,7 +29,7 @@ case "$FIRMWARE" in
 	zn,m2)
 		caldata_extract "0:art" 0x1000 0x10000
 		;;
-	tplink,eap610-outdoor|\
+	tplink,eap610od|\
 	tplink,eap623od-hd-v1)
 		caldata_from_file "/tmp/factory_data/radio" 0 0x10000
 		;;

target/linux/qualcommax/ipq60xx/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac

@@ -45,7 +45,8 @@ case "$board" in
 		[ "$PHYNBR" = "0" ] && macaddr_add $label_mac 2 > /sys${DEVPATH}/macaddress
 		[ "$PHYNBR" = "1" ] && macaddr_add $label_mac 3 > /sys${DEVPATH}/macaddress
 		;;
-	tplink,eap610-outdoor)
+	tplink,eap610od|\
+	tplink,eap623od-hd-v1)
 		label_mac=$(get_mac_binary /tmp/factory_data/default-mac 0)
 		[ "$PHYNBR" = "0" ] && macaddr_add $label_mac 1 > /sys${DEVPATH}/macaddress
 		[ "$PHYNBR" = "1" ] && macaddr_add $label_mac 2 > /sys${DEVPATH}/macaddress

target/linux/qualcommax/ipq60xx/base-files/lib/upgrade/platform.sh

@@ -137,7 +137,7 @@ platform_do_upgrade() {
 		fw_setenv auto_recovery yes
 		nand_do_upgrade "$1"
 		;;
-	tplink,eap610-outdoor|\
+	tplink,eap610od|\
 	tplink,eap623od-hd-v1)
 		tplink_do_upgrade "$1"
 		;;