Nanako/xx_vv_immortalwrt
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Merge Official Source

Browse Source 
Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
This commit is contained in:
Tianling Shen 2024-05-23 16:55:15 +08:00
commit 74d1a626d5
No known key found for this signature in database
GPG Key ID: 6850B6345C862176
24 changed files with 639 additions and 25 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

8
include/host-build.mk
View File

@ -35,13 +35,11 @@ include $(INCLUDE_DIR)/autotools.mk
_host_target:=$(if $(HOST_QUILT),,.)
Host/Patch:=$(Host/Patch/Default)
ifneq ($(strip $(HOST_UNPACK)),)
define Host/Prepare/Default
$(HOST_UNPACK)
define Host/Prepare/Default
$(if $(strip $(HOST_UNPACK)),$(HOST_UNPACK))
[ ! -d ./src/ ] || $(CP) ./src/* $(HOST_BUILD_DIR)
$(Host/Patch)
endef
endif
endef
define Host/Prepare
$(call Host/Prepare/Default)

8
package/Makefile
View File

@ -59,6 +59,12 @@ else
-$(foreach pdir,$(PACKAGE_SUBDIRS),$(if $(wildcard $(pdir)/*.ipk),ln -s $(pdir)/*.ipk $(PACKAGE_DIR_ALL);))
endif
$(BUILD_KEY_APK_SEC):
$(STAGING_DIR_HOST)/bin/openssl ecparam -name prime256v1 -genkey -noout -out $(BUILD_KEY_APK_SEC)
$(BUILD_KEY_APK_PUB): $(BUILD_KEY_APK_SEC)
$(STAGING_DIR_HOST)/bin/openssl ec -in $(BUILD_KEY_APK_SEC) -pubout > $(BUILD_KEY_APK_PUB)
$(curdir)/merge-index: $(curdir)/merge
ifneq ($(CONFIG_USE_APK),)
(cd $(PACKAGE_DIR_ALL) && $(STAGING_DIR_HOST)/bin/apk mkndx \
@ -75,7 +81,7 @@ endif
ifndef SDK
$(curdir)//compile = $(STAGING_DIR)/.prepared $(BIN_DIR)
ifneq ($(CONFIG_USE_APK),)
$(curdir)/compile: $(curdir)/system/apk/host/compile
$(curdir)/compile: $(curdir)/system/apk/host/compile $(BUILD_KEY_APK_SEC) $(BUILD_KEY_APK_PUB)
else
$(curdir)/compile: $(curdir)/system/opkg/host/compile
endif

6
package/base-files/Makefile
View File

@ -117,12 +117,6 @@ endef
Build/Compile = $(Build/Compile/Default)
ifneq ($(CONFIG_USE_APK),)
define Build/Configure
[ -s $(BUILD_KEY_APK_SEC) -a -s $(BUILD_KEY_APK_PUB) ] || \
$(STAGING_DIR_HOST)/bin/openssl ecparam -name prime256v1 -genkey -noout -out $(BUILD_KEY_APK_SEC); \
$(STAGING_DIR_HOST)/bin/openssl ec -in $(BUILD_KEY_APK_SEC) -pubout > $(BUILD_KEY_APK_PUB)
endef
ifndef CONFIG_BUILDBOT
define Package/base-files/install-key
mkdir -p $(1)/etc/apk/keys

6
package/boot/uboot-envtools/files/qualcommax_ipq807x
View File

@ -38,6 +38,12 @@ linksys,mx8500)
[ -n "$idx" ] && \
ubootenv_add_uci_config "/dev/mtd$idx" "0x0" "0x40000" "0x20000" "2"
;;
netgear,sxr80|\
netgear,sxs80)
idx="$(find_mtd_index 0:appsblenv)"
[ -n "$idx" ] && \
ubootenv_add_uci_config "/dev/mtd$idx" "0x0" "0x40000" "0x20000"
;;
redmi,ax6|\
redmi,ax6-stock|\
xiaomi,ax3600|\

2
package/firmware/ipq-wifi/Makefile
View File

@ -40,6 +40,7 @@ ALLWIFIBOARDS:= \
linksys_mx8500 \
netgear_lbr20 \
netgear_rax120v2 \
netgear_sxk80 \
netgear_wax214 \
netgear_wax218 \
netgear_wax620 \
@ -161,6 +162,7 @@ $(eval $(call generate-ipq-wifi-package,linksys_mx5300,Linksys MX5300))
$(eval $(call generate-ipq-wifi-package,linksys_mx8500,Linksys MX8500))
$(eval $(call generate-ipq-wifi-package,netgear_lbr20,Netgear LBR20))
$(eval $(call generate-ipq-wifi-package,netgear_rax120v2,Netgear RAX120v2))
$(eval $(call generate-ipq-wifi-package,netgear_sxk80,Netgear SXK80))
$(eval $(call generate-ipq-wifi-package,netgear_wax214,Netgear WAX214))
$(eval $(call generate-ipq-wifi-package,netgear_wax218,Netgear WAX218))
$(eval $(call generate-ipq-wifi-package,netgear_wax620,Netgear WAX620))

3
package/kernel/qca-nss-dp/patches/0006-nss_dp_main-Use-a-phy-handle-property-to-connect-to-.patch
View File

@ -149,7 +149,7 @@ Signed-off-by: Robert Marko <robimarko@gmail.com>
#if defined(NSS_DP_PPE_SUPPORT)
uint32_t vsi_id;
fal_port_t port_id;
@@ -940,22 +883,15 @@ static int32_t nss_dp_probe(struct platf
@@ -940,22 +883,16 @@ static int32_t nss_dp_probe(struct platf
dp_priv->drv_flags |= NSS_DP_PRIV_FLAG(INIT_DONE);
@ -177,6 +177,7 @@ Signed-off-by: Robert Marko <robimarko@gmail.com>
+ netdev_err(netdev, "failed to connect to phy device\n");
+ goto phy_setup_fail;
+ }
+ phy_attached_info(dp_priv->phydev);
}
#if defined(NSS_DP_PPE_SUPPORT)

2
package/kernel/qca-nss-dp/patches/0011-02-nss_dp_switchdev-correctly-unregister-notifier-on-dp.patch
View File

@ -26,7 +26,7 @@ Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
--- a/nss_dp_main.c
+++ b/nss_dp_main.c
@@ -972,6 +972,10 @@ static int nss_dp_remove(struct platform
@@ -970,6 +970,10 @@ static int nss_dp_remove(struct platform
if (!dp_priv)
continue;

4
package/kernel/qca-nss-dp/patches/0011-03-nss_dp_main-swap-dp_exit-function-call.patch
View File

@ -15,7 +15,7 @@ Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
--- a/nss_dp_main.c
+++ b/nss_dp_main.c
@@ -1163,6 +1163,8 @@ int __init nss_dp_init(void)
@@ -1161,6 +1161,8 @@ int __init nss_dp_init(void)
*/
void __exit nss_dp_exit(void)
{
@ -24,7 +24,7 @@ Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
/*
* TODO Move this to soc_ops
*/
@@ -1170,8 +1172,6 @@ void __exit nss_dp_exit(void)
@@ -1168,8 +1170,6 @@ void __exit nss_dp_exit(void)
nss_dp_hal_cleanup();
dp_global_ctx.common_init_done = false;
}

4
package/kernel/qca-nss-dp/patches/0011-04-nss_dp_main-call-unregister_netdev-first-in-dp_remov.patch
View File

@ -15,7 +15,7 @@ Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
--- a/nss_dp_main.c
+++ b/nss_dp_main.c
@@ -979,6 +979,9 @@ static int nss_dp_remove(struct platform
@@ -977,6 +977,9 @@ static int nss_dp_remove(struct platform
dp_ops = dp_priv->data_plane_ops;
hal_ops = dp_priv->gmac_hal_ops;
@ -25,7 +25,7 @@ Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
if (dp_priv->phydev)
phy_disconnect(dp_priv->phydev);
@@ -990,7 +993,6 @@ static int nss_dp_remove(struct platform
@@ -988,7 +991,6 @@ static int nss_dp_remove(struct platform
#endif
hal_ops->exit(dp_priv->gmac_hal_ctx);
dp_ops->deinit(dp_priv->dpc);

2
package/kernel/qca-nss-dp/patches/0011-05-nss_dp_main-use-phy_detach-instead-of-disconnect-in-.patch
View File

@ -15,7 +15,7 @@ Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
--- a/nss_dp_main.c
+++ b/nss_dp_main.c
@@ -983,7 +983,7 @@ static int nss_dp_remove(struct platform
@@ -981,7 +981,7 @@ static int nss_dp_remove(struct platform
unregister_netdev(dp_priv->netdev);
if (dp_priv->phydev)

2
scripts/getver.sh
View File

@ -26,7 +26,7 @@ try_git() {
*)
BRANCH="$(git rev-parse --abbrev-ref HEAD)"
ORIGIN="$(git rev-parse --verify --symbolic-full-name ${BRANCH}@{u} 2>/dev/null)"
[ -n "$ORIGIN" ] || ORIGIN="$(git rev-parse --verify --symbolic-full-name master@{u} 2>/dev/null)"
[ -n "$ORIGIN" ] || ORIGIN="$(git rev-parse --verify --symbolic-full-name main@{u} 2>/dev/null)"
REV="$(git rev-list ${REBOOT}..$GET_REV 2>/dev/null | wc -l | awk '{print $1}')"
if [ -n "$ORIGIN" ]; then

2
target/linux/ipq40xx/patches-6.6/706-net-dsa-qca8k-add-IPQ4019-built-in-switch-support.patch
View File

@ -654,7 +654,7 @@ Signed-off-by: Robert Marko <robert.marko@sartura.hr>
+ }
+ }
+
+ panic("PSGMII work is unstable !!! "
+ dev_err(priv->dev, "PSGMII work is unstable !!! "
+ "Repeated recalibration attempts did not help(0x%x) !\n",
+ test_result);
+

2
target/linux/qualcommax/config-6.6
View File

@ -216,6 +216,7 @@ CONFIG_IRQ_FASTEOI_HIERARCHY_HANDLERS=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_IRQ_WORK=y
# CONFIG_KPSS_XCC is not set
CONFIG_LEDS_TLC591XX=y
CONFIG_LIBFDT=y
CONFIG_LOCK_DEBUGGING_SUPPORT=y
CONFIG_LOCK_SPIN_ON_OWNER=y
@ -441,6 +442,7 @@ CONFIG_RANDSTRUCT_NONE=y
CONFIG_RAS=y
CONFIG_RATIONAL=y
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=y
CONFIG_REGMAP_MMIO=y
CONFIG_REGULATOR=y
# CONFIG_REGULATOR_CPR3 is not set

1
target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8072-sax1v1k.dts
View File

@ -136,6 +136,7 @@
compatible = "ethernet-phy-id004d.d101";
reg = <28>;
reset-gpios = <&tlmm 44 GPIO_ACTIVE_LOW>;
reset-deassert-us = <10000>;
};
};

541
target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8074-sxk80.dtsi Normal file
View File

@ -0,0 +1,541 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/*
* Copyright (c) 2021, Flole <flole@flole.de>
* Copyright (c) 2023, Andrew Smith <gul.code@outlook.com>
*/
/dts-v1/;
#include "ipq8074.dtsi"
#include "ipq8074-ess.dtsi"
#include "ipq8074-hk-cpu.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
/ {
aliases {
serial0 = &blsp1_uart5;
led-boot = &led_front_blue;
led-failsafe = &led_front_red;
led-running = &led_front_green;
led-upgrade = &led_front_white;
label-mac-device = &dp2;
};
chosen {
stdout-path = "serial0:115200n8";
bootargs-append = " ubi.mtd=rootfs root=/dev/ubiblock0_0";
};
keys {
compatible = "gpio-keys";
reset {
label = "reset";
gpios = <&tlmm 54 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
wps {
label = "wps";
gpios = <&tlmm 57 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
};
leds {
compatible = "gpio-leds";
led_front_blue: front-blue {
function = LED_FUNCTION_STATUS;
gpios = <&tlmm 33 GPIO_ACTIVE_LOW>;
color = <LED_COLOR_ID_BLUE>;
};
led_front_green: front-green {
function = LED_FUNCTION_STATUS;
gpios = <&tlmm 29 GPIO_ACTIVE_LOW>;
color = <LED_COLOR_ID_GREEN>;
};
led_front_red: front-red {
function = LED_FUNCTION_STATUS;
gpios = <&tlmm 31 GPIO_ACTIVE_LOW>;
color = <LED_COLOR_ID_RED>;
};
led_front_white: front-white {
function = LED_FUNCTION_STATUS;
gpios = <&tlmm 26 GPIO_ACTIVE_LOW>;
color = <LED_COLOR_ID_WHITE>;
};
led_power_green: power-green {
function = LED_FUNCTION_POWER;
gpios = <&tlmm 21 GPIO_ACTIVE_LOW>;
color = <LED_COLOR_ID_GREEN>;
default-state = "on";
};
led_power_red: power-red {
function = LED_FUNCTION_POWER;
gpios = <&tlmm 22 GPIO_ACTIVE_LOW>;
color = <LED_COLOR_ID_RED>;
panic-indicator;
};
};
};
&tlmm {
mdio_pins: mdio-pins {
mdc {
pins = "gpio68";
function = "mdc";
drive-strength = <8>;
bias-pull-up;
};
mdio {
pins = "gpio69";
function = "mdio";
drive-strength = <8>;
bias-pull-up;
};
};
leds_pins: leds_pinmux {
led_power_green {
pins = "gpio21";
function = "gpio";
drive-strength = <8>;
bias-pull-down;
};
led_power_red {
pins = "gpio22";
function = "gpio";
drive-strength = <8>;
bias-pull-down;
};
led_white {
pins = "gpio26";
function = "gpio";
drive-strength = <8>;
bias-pull-down;
};
led_green {
pins = "gpio29";
function = "gpio";
drive-strength = <8>;
bias-pull-down;
};
led_red {
pins = "gpio31";
function = "gpio";
drive-strength = <8>;
bias-pull-down;
};
led_blue {
pins = "gpio33";
function = "gpio";
drive-strength = <8>;
bias-pull-down;
};
};
};
&blsp1_uart5 {
status = "okay";
};
&blsp1_i2c2 {
pinctrl-0 = <&i2c_0_pins>;
pinctrl-names = "default";
status = "okay";
tlc59208f@27 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "ti,tlc59108";
reg = <0x27>;
led@0 {
label = "rgb:led0";
reg = <0>;
linux,default-trigger = "default-off";
};
led@1 {
label = "rgb:led1";
reg = <1>;
linux,default-trigger = "default-off";
};
led@2 {
label = "rgb:led2";
reg = <2>;
linux,default-trigger = "default-off";
};
led@3 {
label = "rgb:led3";
reg = <3>;
linux,default-trigger = "default-off";
};
};
};
&prng {
status = "okay";
};
&cryptobam {
status = "okay";
};
&crypto {
status = "okay";
};
&qpic_bam {
status = "okay";
};
&qpic_nand {
status = "okay";
/*
* Bootloader will find the NAND DT node by the compatible and
* then "fixup" it by adding the partitions from the SMEM table
* using the legacy bindings thus making it impossible for us
* to change the partition table or utilize NVMEM for calibration.
* So add a dummy partitions node that bootloader will populate
* and set it as disabled so the kernel ignores it instead of
* printing warnings due to the broken way bootloader adds the
* partitions.
*/
partitions {
status = "disabled";
};
nand@0 {
reg = <0>;
nand-ecc-strength = <4>;
nand-ecc-step-size = <512>;
nand-bus-width = <8>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "0:sbl1";
reg = <0x00 0x100000>;
read-only;
};
partition@100000 {
label = "0:mibib";
reg = <0x100000 0x100000>;
read-only;
};
partition@200000 {
label = "0:bootconfig";
reg = <0x200000 0x80000>;
read-only;
};
partition@280000 {
label = "0:bootconfig_1";
reg = <0x280000 0x80000>;
read-only;
};
partition@300000 {
label = "0:qsee";
reg = <0x300000 0x300000>;
read-only;
};
partition@600000 {
label = "0:qsee_1";
reg = <0x600000 0x300000>;
read-only;
};
partition@900000 {
label = "0:devcfg";
reg = <0x900000 0x80000>;
read-only;
};
partition@980000 {
label = "0:devcfg_1";
reg = <0x980000 0x80000>;
read-only;
};
partition@a00000 {
label = "0:apdp";
reg = <0xa00000 0x80000>;
read-only;
};
partition@a80000 {
label = "0:apdp_1";
reg = <0xa80000 0x80000>;
read-only;
};
partition@b00000 {
label = "0:rpm";
reg = <0xb00000 0x80000>;
read-only;
};
partition@b80000 {
label = "0:rpm_1";
reg = <0xb80000 0x80000>;
read-only;
};
partition@c00000 {
label = "0:cdt";
reg = <0xc00000 0x80000>;
read-only;
};
partition@c80000 {
label = "0:cdt_1";
reg = <0xc80000 0x80000>;
read-only;
};
partition@d00000 {
label = "0:appsblenv";
reg = <0xd00000 0x80000>;
};
partition@d80000 {
label = "0:appsbl";
reg = <0xd80000 0x100000>;
read-only;
};
partition@e80000 {
label = "0:appsbl_1";
reg = <0xe80000 0x100000>;
read-only;
};
partition@f80000 {
label = "0:art";
reg = <0xf80000 0x80000>;
read-only;
};
partition@1000000 {
label = "0:art.bak";
reg = <0x1000000 0x80000>;
read-only;
};
partition@1080000 {
label = "config";
reg = <0x1080000 0x100000>;
};
partition@1180000 {
label = "boarddata1";
reg = <0x1180000 0x100000>;
nvmem-layout {
compatible = "fixed-layout";
#address-cells = <1>;
#size-cells = <1>;
macaddr_boarddata1_0: macaddr@0 {
reg = <0x0 0x6>;
};
macaddr_boarddata1_6: macaddr@6 {
reg = <0x6 0x6>;
};
};
};
partition@1280000 {
label = "boarddata2";
reg = <0x1280000 0x100000>;
};
partition@1380000 {
label = "pot";
reg = <0x1380000 0x100000>;
read-only;
};
partition@1480000 {
label = "dnidata";
reg = <0x1480000 0x500000>;
read-only;
};
partition@1980000 {
label = "kernel";
reg = <0x1980000 0x620000>;
};
partition@1fa0000 {
label = "rootfs";
reg = <0x1fa0000 0x66e0000>;
};
partition@8680000 {
label = "kernel2";
reg = <0x8680000 0x620000>;
read-only;
};
partition@8ca0000 {
label = "rootfs2";
reg = <0x8ca0000 0x66e0000>;
read-only;
};
};
};
};
&mdio {
status = "okay";
pinctrl-0 = <&mdio_pins>;
pinctrl-names = "default";
reset-gpios = <&tlmm 37 GPIO_ACTIVE_LOW>;
ethernet-phy-package@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
compatible = "qcom,qca8075-package";
qca8075_1: ethernet-phy@1 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <1>;
};
qca8075_2: ethernet-phy@2 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <2>;
};
qca8075_3: ethernet-phy@3 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <3>;
};
qca8075_4: ethernet-phy@4 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <4>;
};
};
qca8081_28: ethernet-phy@28 {
compatible = "ethernet-phy-id004d.d101";
reg = <28>;
reset-deassert-us = <10000>;
reset-gpios = <&tlmm 25 GPIO_ACTIVE_LOW>;
};
};
&switch {
status = "okay";
switch_lan_bmp = <(ESS_PORT2 | ESS_PORT3 | ESS_PORT4 | ESS_PORT5)>; /* lan port bitmap */
switch_wan_bmp = <ESS_PORT6>; /* wan port bitmap */
switch_mac_mode = <MAC_MODE_PSGMII>; /* mac mode for uniphy instance0*/
switch_mac_mode2 = <MAC_MODE_SGMII_PLUS>; /* mac mode for uniphy instance2*/
qcom,port_phyinfo {
port@2 {
port_id = <2>;
phy_address = <1>;
};
port@3 {
port_id = <3>;
phy_address = <2>;
};
port@4 {
port_id = <4>;
phy_address = <3>;
};
port@5 {
port_id = <5>;
phy_address = <4>;
};
port@6 {
port_id = <6>;
phy_address = <28>;
port_mac_sel = "QGMAC_PORT";
};
};
};
&edma {
status = "okay";
};
&dp2 {
status = "okay";
phy-handle = <&qca8075_1>;
label = "lan2";
nvmem-cells = <&macaddr_boarddata1_0>;
nvmem-cell-names = "mac-address";
};
&dp3 {
status = "okay";
phy-handle = <&qca8075_2>;
label = "lan3";
nvmem-cells = <&macaddr_boarddata1_0>;
nvmem-cell-names = "mac-address";
};
&dp4 {
status = "okay";
phy-handle = <&qca8075_3>;
label = "lan4";
nvmem-cells = <&macaddr_boarddata1_0>;
nvmem-cell-names = "mac-address";
};
&dp5 {
status = "okay";
phy-handle = <&qca8075_4>;
label = "lan5";
nvmem-cells = <&macaddr_boarddata1_0>;
nvmem-cell-names = "mac-address";
};
&dp6 {
status = "okay";
phy-handle = <&qca8081_28>;
label = "wan";
nvmem-cells = <&macaddr_boarddata1_6>;
nvmem-cell-names = "mac-address";
};
&wifi {
status = "okay";
qcom,ath11k-calibration-variant = "Netgear-SXK80";
};

11
target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8074-sxr80.dts Normal file
View File

@ -0,0 +1,11 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/* Copyright (c) 2021, Flole <flole@flole.de> */
/dts-v1/;
#include "ipq8074-sxk80.dtsi"
/ {
model = "Netgear SXR80";
compatible = "netgear,sxr80", "qcom,ipq8074";
};

11
target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8074-sxs80.dts Normal file
View File

@ -0,0 +1,11 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/* Copyright (c) 2021, Flole <flole@flole.de> */
/dts-v1/;
#include "ipq8074-sxk80.dtsi"
/ {
model = "Netgear SXS80";
compatible = "netgear,sxs80", "qcom,ipq8074";
};

27
target/linux/qualcommax/image/ipq807x.mk
View File

@ -172,6 +172,33 @@ define Device/netgear_rax120v2
endef
TARGET_DEVICES += netgear_rax120v2
define Device/netgear_sxk80
$(call Device/FitImage)
$(call Device/UbiFit)
DEVICE_PACKAGES += ipq-wifi-netgear_sxk80
DEVICE_VENDOR := Netgear
BLOCKSIZE := 128k
PAGESIZE := 2048
DEVICE_DTS_CONFIG := config@hk01
SOC := ipq8074
KERNEL_SIZE := 6272k
NETGEAR_HW_ID := 29766265+0+512+1024+4x4+4x4+4x4
endef
define Device/netgear_sxr80
$(call Device/netgear_sxk80)
DEVICE_MODEL := SXR80
NETGEAR_BOARD_ID := SXR80
endef
TARGET_DEVICES += netgear_sxr80
define Device/netgear_sxs80
$(call Device/netgear_sxk80)
DEVICE_MODEL := SXS80
NETGEAR_BOARD_ID := SXS80
endef
TARGET_DEVICES += netgear_sxs80
define Device/netgear_wax218
$(call Device/FitImage)
$(call Device/UbiFit)

4
target/linux/qualcommax/ipq807x/base-files/etc/board.d/02_network
View File

@ -46,6 +46,10 @@ ipq807x_setup_interfaces()
netgear,rax120v2)
ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4 lan5" "wan"
;;
netgear,sxr80|\
netgear,sxs80)
ucidef_set_interfaces_lan_wan "lan2 lan3 lan4 lan5" "wan"
;;
netgear,wax218|\
netgear,wax620)
ucidef_set_interface_lan "lan" "dhcp"

2
target/linux/qualcommax/ipq807x/base-files/etc/hotplug.d/firmware/11-ath11k-caldata
View File

@ -17,6 +17,8 @@ case "$FIRMWARE" in
edgecore,eap102|\
edimax,cax1800|\
linksys,mx5300|\
netgear,sxr80|\
netgear,sxs80|\
netgear,wax218|\
netgear,wax620|\
netgear,wax630|\

7
target/linux/qualcommax/ipq807x/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac
View File

@ -23,6 +23,13 @@ case "$board" in
[ "$PHYNBR" = "0" ] && macaddr_add $(get_mac_label) 2 > /sys${DEVPATH}/macaddress
[ "$PHYNBR" = "1" ] && macaddr_add $(get_mac_label) 3 > /sys${DEVPATH}/macaddress
;;
netgear,sxr80|\
netgear,sxs80)
[ "$PHYNBR" = "0" ] && mtd_get_mac_binary boarddata1 0x0c > /sys${DEVPATH}/macaddress
#boarddata1 doesn't have a MAC for the 2G interface
[ "$PHYNBR" = "1" ] && macaddr_setbit_la $(get_mac_label) > /sys${DEVPATH}/macaddress
[ "$PHYNBR" = "2" ] && mtd_get_mac_binary boarddata1 0x12 > /sys${DEVPATH}/macaddress
;;
zbtlink,zbt-z800ax)
[ "$PHYNBR" = "0" ] && macaddr_add $(get_mac_label) -1 > /sys${DEVPATH}/macaddress
[ "$PHYNBR" = "1" ] && macaddr_add $(get_mac_label) -2 > /sys${DEVPATH}/macaddress

2
target/linux/qualcommax/ipq807x/base-files/lib/upgrade/platform.sh
View File

@ -49,6 +49,8 @@ platform_do_upgrade() {
dynalink,dl-wrx36|\
edimax,cax1800|\
netgear,rax120v2|\
netgear,sxr80|\
netgear,sxs80|\
netgear,wax218|\
netgear,wax620|\
netgear,wax630|\

4
tools/missing-macros/Makefile
View File

@ -20,9 +20,9 @@ endef
define Host/Install
$(INSTALL_DIR) $(STAGING_DIR_HOST)/share/aclocal
$(INSTALL_DATA) ./src/m4/*.m4 $(STAGING_DIR_HOST)/share/aclocal/
$(INSTALL_DATA) $(HOST_BUILD_DIR)/m4/*.m4 $(STAGING_DIR_HOST)/share/aclocal/
$(INSTALL_DIR) $(STAGING_DIR_HOST)/bin
$(INSTALL_BIN) ./src/bin/* $(STAGING_DIR_HOST)/bin/
$(INSTALL_BIN) $(HOST_BUILD_DIR)/bin/* $(STAGING_DIR_HOST)/bin/
$(LN) makeinfo $(STAGING_DIR_HOST)/bin/texi2any
$(LN) makeinfo $(STAGING_DIR_HOST)/bin/texi2pdf
$(LN) makeinfo $(STAGING_DIR_HOST)/bin/texi2dvi

3
tools/padjffs2/Makefile
View File

@ -13,8 +13,7 @@ PKG_RELEASE:=1
include $(INCLUDE_DIR)/host-build.mk
define Host/Prepare
mkdir -p $(HOST_BUILD_DIR)
$(CP) ./src/* $(HOST_BUILD_DIR)/
$(call Host/Prepare/Default)
find $(HOST_BUILD_DIR) -name .svn | $(XARGS) rm -rf
endef