ramips: add support for Wavlink WS-WN572HP3 4G
Wavlink WS-WN572HP3 4G is an 802.11ac dual-band outdoor router with LTE support. Specifications; * Soc: MT7621DAT * RAM: 128MiB * Flash: NOR 16MiB GD-25Q128ESIG3 * Wi-Fi: * MT7613BEN: 5GHz * MT7603EN: 2.4GHz * Ethernet: 2x 1GbE * USB: None - only used internally * LTE Modem: Quectel EC200T-EU * UART: 115200 baud * LEDs: * 7 blue at the front * 1 Power * 2 LAN / WAN * 1 Status * 3 RSSI (annotated 4G) * 1 green at the bottom (4G LED) * Buttons: 1 reset button Installation: * press and hold the reset button while powering on the device * keep it pressed for ten seconds * connect to 192.168.10.1 via webbrowser (chromium/chrome works, at least Firefox 106.0.3 does not) * upload the sysupgrade image, confirm the checksum, wait 2 minutes until the device reboots Revert to stock firmware: * same as installation but use the recovery image for WL-WN572HP3 Signed-off-by: Jan-Niklas Burfeind <git@aiyionpri.me> Acked-by: Arınç ÜNAL <arinc.unal@arinc9.com>
This commit is contained in:
parent
13f82ce264
commit
dce66899bf
184
target/linux/ramips/dts/mt7621_wavlink_ws-wn572hp3-4g.dts
Normal file
184
target/linux/ramips/dts/mt7621_wavlink_ws-wn572hp3-4g.dts
Normal file
@ -0,0 +1,184 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
|
||||
#include "mt7621.dtsi"
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
|
||||
/ {
|
||||
compatible = "wavlink,ws-wn572hp3-4g", "mediatek,mt7621-soc";
|
||||
model = "Wavlink WS-WN572HP3 4G";
|
||||
|
||||
chosen {
|
||||
bootargs = "console=ttyS0,115200";
|
||||
};
|
||||
|
||||
aliases {
|
||||
label-mac-device = &wifi1;
|
||||
led-boot = &led_status_blue;
|
||||
led-failsafe = &led_status_blue;
|
||||
led-running = &led_status_blue;
|
||||
led-upgrade = &led_status_blue;
|
||||
};
|
||||
|
||||
keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
reset {
|
||||
label = "Reset Button";
|
||||
gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RESTART>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
rssihigh {
|
||||
label = "blue:rssihigh";
|
||||
gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
rssimedium {
|
||||
label = "blue:rssimedium";
|
||||
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
rssilow {
|
||||
label = "blue:rssilow";
|
||||
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led_status_blue: status_blue {
|
||||
label = "blue:status";
|
||||
gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
// gpio 15 would be Quectels PWRKEY if used
|
||||
};
|
||||
};
|
||||
|
||||
&spi0 {
|
||||
status = "okay";
|
||||
|
||||
flash@0 {
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <40000000>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "u-boot";
|
||||
reg = <0x0 0x30000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@30000 {
|
||||
label = "config";
|
||||
reg = <0x30000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
factory: partition@40000 {
|
||||
label = "factory";
|
||||
reg = <0x40000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@50000 {
|
||||
compatible = "denx,fit";
|
||||
label = "firmware";
|
||||
reg = <0x50000 0xf30000>;
|
||||
};
|
||||
|
||||
partition@f00000 {
|
||||
label = "vendor";
|
||||
reg = <0xf80000 0x80000>;
|
||||
read-only;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pcie {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie0 {
|
||||
wifi0: mt76@0,0 {
|
||||
compatible = "mediatek,mt76";
|
||||
reg = <0x0000 0 0 0 0>;
|
||||
mediatek,mtd-eeprom = <&factory 0x0>;
|
||||
};
|
||||
};
|
||||
|
||||
&pcie1 {
|
||||
wifi1: mt76@0,0 {
|
||||
compatible = "mediatek,mt76";
|
||||
reg = <0x0000 0 0 0 0>;
|
||||
mediatek,mtd-eeprom = <&factory 0x8000>;
|
||||
};
|
||||
};
|
||||
|
||||
&gmac0 {
|
||||
nvmem-cells = <&macaddr_factory_e000>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
};
|
||||
|
||||
&gmac1 {
|
||||
status = "okay";
|
||||
label = "wan";
|
||||
phy-handle = <ðphy4>;
|
||||
|
||||
nvmem-cells = <&macaddr_factory_e006>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
};
|
||||
|
||||
&mdio {
|
||||
ethphy4: ethernet-phy@4 {
|
||||
reg = <4>;
|
||||
};
|
||||
};
|
||||
|
||||
&switch0 {
|
||||
ports {
|
||||
port@1 {
|
||||
status = "okay";
|
||||
label = "lan";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&state_default {
|
||||
gpio {
|
||||
groups = "wdt";
|
||||
function = "gpio";
|
||||
};
|
||||
};
|
||||
|
||||
&factory {
|
||||
compatible = "nvmem-cells";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
macaddr_factory_e000: macaddr@e000 {
|
||||
reg = <0xe000 0x6>;
|
||||
};
|
||||
|
||||
macaddr_factory_e006: macaddr@e006 {
|
||||
reg = <0xe006 0x6>;
|
||||
};
|
||||
};
|
||||
|
||||
&wifi0{
|
||||
ieee80211-freq-limit = <2400000 2500000>;
|
||||
};
|
||||
|
||||
&wifi1{
|
||||
ieee80211-freq-limit = <5000000 6000000>;
|
||||
};
|
||||
|
@ -2145,6 +2145,23 @@ define Device/wavlink_wl-wn533a8
|
||||
endef
|
||||
TARGET_DEVICES += wavlink_wl-wn533a8
|
||||
|
||||
define Device/wavlink_ws-wn572hp3-4g
|
||||
$(Device/dsa-migration)
|
||||
BLOCKSIZE := 64k
|
||||
DEVICE_VENDOR := Wavlink
|
||||
DEVICE_MODEL := WS-WN572HP3
|
||||
DEVICE_VARIANT := 4G
|
||||
IMAGE_SIZE := 15040k
|
||||
KERNEL_LOADADDR := 0x82000000
|
||||
KERNEL := kernel-bin | relocate-kernel 0x80001000 | lzma | \
|
||||
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
|
||||
IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \
|
||||
append-rootfs | pad-rootfs | check-size | append-metadata
|
||||
DEVICE_PACKAGES := kmod-mt7603 kmod-mt7615e kmod-mt7663-firmware-ap \
|
||||
kmod-usb3 kmod-usb-net-rndis comgt-ncm
|
||||
endef
|
||||
TARGET_DEVICES += wavlink_ws-wn572hp3-4g
|
||||
|
||||
define Device/wevo_11acnas
|
||||
$(Device/dsa-migration)
|
||||
$(Device/uimage-lzma-loader)
|
||||
|
@ -50,6 +50,7 @@ ramips_setup_interfaces()
|
||||
;;
|
||||
asiarf,ap7621-001|\
|
||||
humax,e10|\
|
||||
wavlink,ws-wn572hp3-4g|\
|
||||
winstars,ws-wn583a6)
|
||||
ucidef_set_interfaces_lan_wan "lan" "wan"
|
||||
;;
|
||||
|
Loading…
x
Reference in New Issue
Block a user