
Hardware specification: SoC: MediaTek MT7981B 2x A53 Flash: 64GB eMMC or 128 MB SPI-NAND RAM: 512MB DDR3 or DDR4 Ethernet: 4x 10/100/1000 Mbps Switch: MediaTek MT7531AE WiFi: MediaTek MT7976C Button: Reset, Mesh Power: DC 12V 1A Gain SSH access: 1. Login into web interface, and download the configuration. 2. Get the SN of the device from web interface or the label on the back of the device. 3. Calculate configuration decryption password: Command "eval" is necessary here as the encryption implentation treats '$...' as (empty) variables. decpwd="$(eval echo $(openssl passwd -1 -salt aV6dW8bD "your_device_sn"))" 4. Decrypt the configuration: openssl aes-256-cbc -d -pbkdf2 -k "$decpwd" -in cfg_export_config_file.conf -out cfg_export_config_file.conf.dec 5. Enter fakeroot, decompress the configuration: tar -zxf cfg_export_config_file.conf.dec 6. Edit 'etc/shadow', update (remove) root password: 'root::19179:0:99999:7:::' 7. Edit 'etc/rc.local', insert telnetd command before 'exit 0': ( sleep 3s; telnetd; ) & 8. Repack the configuration: tar -zc etc/ | openssl aes-256-cbc -pbkdf2 -k "$decpwd" -out cfg_export_config_file.conf * If you find an error about 'etc/wireless/mediatek/DBDC_card0.dat', just ignore it. 9. Upload new configuration via web interface, now you can connect to CMCC RAX3000Me via telnet. (Big thanks to https://github.com/lyq1996 who reverse engineered the encryption method) Check flash type: If '/dev/mmcblk0' exists on the device, it's eMMC version. If '/dev/mtd0' exists on the device, it's NAND version. eMMC Flash instructions: 1. Connect to RAX3000Me, and backup everything, especially 'factory' part. ('data' partition can be ignored, it's useless.) 2. Write new GPT table: dd if=immortalwrt-mediatek-filogic-cmcc_rax3000me-emmc-gpt.bin of=/dev/mmcblk0 bs=512 seek=0 count=34 conv=fsync 3. Write new BL2: echo 0 > /sys/block/mmcblk0boot0/force_ro dd if=immortalwrt-mediatek-filogic-cmcc_rax3000me-emmc-preloader.bin of=/dev/mmcblk0boot0 bs=512 conv=fsync 4. Write new FIP: dd if=immortalwrt-mediatek-filogic-cmcc_rax3000me-emmc-bl31-uboot.fip of=/dev/mmcblk0 bs=512 seek=13312 conv=fsync 5. Set static IP on your PC: IP 192.168.1.254/24, GW 192.168.1.1 6. Serve ImmortalWrt initramfs image using TFTP server. 7. Cut off the power and re-engage, wait for TFTP recovery to complete. 8. After ImmortalWrt has booted, perform sysupgrade. NAND Flash instructions: 1. Connect to RAX3000Me, and backup everything, especially 'Factory' part. 2. Write new BL2 and FIP: If your device HAS USB port, run: mtd write immortalwrt-mediatek-filogic-cmcc_rax3000me-nand-ddr3-preloader.bin BL2 mtd write immortalwrt-mediatek-filogic-cmcc_rax3000me-nand-ddr3-bl31-uboot.fip FIP If your device DOES NOT have USB port, run: mtd write immortalwrt-mediatek-filogic-cmcc_rax3000me-nand-ddr4-preloader.bin BL2 mtd write immortalwrt-mediatek-filogic-cmcc_rax3000me-nand-ddr4-bl31-uboot.fip FIP 4. Set static IP on your PC: IP 192.168.1.254/24, GW 192.168.1.1 5. Serve ImmortalWrt initramfs image using TFTP server. 6. Cut off the power and re-engage, wait for TFTP recovery to complete. 7. After ImmortalWrt has booted, perform sysupgrade. Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
1083 lines
28 KiB
Makefile
1083 lines
28 KiB
Makefile
include $(TOPDIR)/rules.mk
|
|
include $(INCLUDE_DIR)/kernel.mk
|
|
|
|
PKG_VERSION:=2025.01
|
|
PKG_HASH:=cdef7d507c93f1bbd9f015ea9bc21fa074268481405501945abc6f854d5b686f
|
|
PKG_BUILD_DEPENDS:=!(TARGET_ramips||TARGET_mediatek_mt7623):arm-trusted-firmware-tools/host
|
|
|
|
UBOOT_USE_INTREE_DTC:=1
|
|
|
|
include $(INCLUDE_DIR)/u-boot.mk
|
|
include $(INCLUDE_DIR)/package.mk
|
|
include $(INCLUDE_DIR)/host-build.mk
|
|
|
|
MT7621_LOWLEVEL_PRELOADER_URL:=https://raw.githubusercontent.com/mtk-openwrt/mt7621-lowlevel-preloader/a03b07c60bf1ba4add9b671d32caa102fe948180/
|
|
|
|
define Download/mt7621-stage-sram
|
|
FILE:=mt7621_stage_sram.bin
|
|
URL:=$(MT7621_LOWLEVEL_PRELOADER_URL)
|
|
HASH:=1dda68aa089f0ff262e01539b990dea478952e9fb68bcc0a8cd6f76f0135c62e
|
|
endef
|
|
|
|
define Download/mt7621-stage-sram-noprint
|
|
FILE:=mt7621_stage_sram_noprint.bin
|
|
URL:=$(MT7621_LOWLEVEL_PRELOADER_URL)
|
|
HASH:=8ee419275144fc298e9444d413d98e965a55d283152a74ea6a1f8de79eb516b6
|
|
endef
|
|
|
|
ifdef CONFIG_TARGET_ramips_mt7621
|
|
ifdef CONFIG_DEBUG
|
|
$(eval $(call Download,mt7621-stage-sram))
|
|
else
|
|
$(eval $(call Download,mt7621-stage-sram-noprint))
|
|
endif
|
|
endif
|
|
|
|
define U-Boot/Default
|
|
BUILD_TARGET:=mediatek
|
|
UBOOT_IMAGE:=u-boot-mtk.bin
|
|
HIDDEN:=1
|
|
endef
|
|
|
|
define U-Boot/mt7620_rfb
|
|
NAME:=MT7620 Reference Board
|
|
UBOOT_CONFIG:=mt7620_rfb
|
|
BUILD_DEVICES:=ralink_mt7620a-evb
|
|
BUILD_TARGET:=ramips
|
|
BUILD_SUBTARGET:=mt7620
|
|
UBOOT_IMAGE:=u-boot-with-spl.bin
|
|
endef
|
|
|
|
define U-Boot/mt7620_mt7530_rfb
|
|
NAME:=MT7620+MT7530 Reference Board
|
|
UBOOT_CONFIG:=mt7620_mt7530_rfb
|
|
BUILD_DEVICES:=ralink_mt7620a-mt7530-evb
|
|
BUILD_TARGET:=ramips
|
|
BUILD_SUBTARGET:=mt7620
|
|
UBOOT_IMAGE:=u-boot-with-spl.bin
|
|
endef
|
|
|
|
define U-Boot/mt7621_rfb
|
|
NAME:=MT7621 Reference Board
|
|
UBOOT_CONFIG:=mt7621_rfb
|
|
BUILD_DEVICES:=mediatek_mt7621-eval-board
|
|
BUILD_TARGET:=ramips
|
|
BUILD_SUBTARGET:=mt7621
|
|
UBOOT_IMAGE:=u-boot-mt7621.bin
|
|
endef
|
|
|
|
define U-Boot/mt7621_nand_rfb
|
|
NAME:=MT7621 Reference Board (NAND)
|
|
UBOOT_CONFIG:=mt7621_nand_rfb
|
|
BUILD_DEVICES:=mediatek_mt7621-eval-board
|
|
BUILD_TARGET:=ramips
|
|
BUILD_SUBTARGET:=mt7621
|
|
UBOOT_IMAGE:=u-boot-mt7621.bin
|
|
endef
|
|
|
|
define U-Boot/mt7621_zbtlink_zbt-wg3526-16m
|
|
NAME:=Zbtlink ZBT-WG3526-16m
|
|
UBOOT_CONFIG:=mt7621_zbtlink_zbt-wg3526-16m
|
|
BUILD_DEVICES:=zbtlink_zbt-wg3526-16m
|
|
BUILD_TARGET:=ramips
|
|
BUILD_SUBTARGET:=mt7621
|
|
UBOOT_IMAGE:=u-boot-mt7621.bin
|
|
endef
|
|
|
|
define U-Boot/mt7622_rfb1
|
|
NAME:=MT7622 Reference Board 1
|
|
UBOOT_CONFIG:=mt7622_rfb
|
|
BUILD_DEVICES:=mediatek_mt7622-rfb1 mediatek_mt7622-rfb1-ubi
|
|
BUILD_SUBTARGET:=mt7622
|
|
endef
|
|
|
|
define U-Boot/mt7622_linksys_e8450
|
|
NAME:=Linksys E8450
|
|
UBOOT_CONFIG:=mt7622_linksys_e8450
|
|
BUILD_DEVICES:=linksys_e8450-ubi
|
|
BUILD_SUBTARGET:=mt7622
|
|
UBOOT_IMAGE:=u-boot.fip
|
|
BL2_BOOTDEV:=snand-ubi
|
|
BL2_DDRBLOB:=1
|
|
DEPENDS:=+trusted-firmware-a-mt7622-snand-ubi-1ddr
|
|
endef
|
|
|
|
define U-Boot/mt7622_bananapi_bpi-r64-emmc
|
|
NAME:=BananaPi R64 (eMMC)
|
|
UBOOT_CONFIG:=mt7622_bananapi_bpi-r64-emmc
|
|
BUILD_DEVICES:=bananapi_bpi-r64
|
|
BUILD_SUBTARGET:=mt7622
|
|
UBOOT_IMAGE:=u-boot.fip
|
|
BL2_BOOTDEV:=emmc
|
|
BL2_DDRBLOB:=2
|
|
DEPENDS:=+trusted-firmware-a-mt7622-emmc-2ddr
|
|
endef
|
|
|
|
define U-Boot/mt7622_bananapi_bpi-r64-sdmmc
|
|
NAME:=BananaPi R64 (SDMMC)
|
|
UBOOT_CONFIG:=mt7622_bananapi_bpi-r64-sdmmc
|
|
BUILD_DEVICES:=bananapi_bpi-r64
|
|
BUILD_SUBTARGET:=mt7622
|
|
UBOOT_IMAGE:=u-boot.fip
|
|
BL2_BOOTDEV:=sdmmc
|
|
BL2_DDRBLOB:=2
|
|
DEPENDS:=+trusted-firmware-a-mt7622-sdmmc-2ddr
|
|
endef
|
|
|
|
define U-Boot/mt7622_bananapi_bpi-r64-snand
|
|
NAME:=BananaPi R64 (SNAND)
|
|
UBOOT_CONFIG:=mt7622_bananapi_bpi-r64-snand
|
|
BUILD_DEVICES:=bananapi_bpi-r64
|
|
BUILD_SUBTARGET:=mt7622
|
|
UBOOT_IMAGE:=u-boot.fip
|
|
BL2_BOOTDEV:=snand-ubi
|
|
BL2_DDRBLOB:=2
|
|
DEPENDS:=+trusted-firmware-a-mt7622-snand-ubi-2ddr
|
|
endef
|
|
|
|
define U-Boot/mt7622_ubnt_unifi-6-lr-v1
|
|
NAME:=Ubiquiti UniFi 6 LR
|
|
UBOOT_CONFIG:=mt7622_ubnt_unifi-6-lr-v1
|
|
BUILD_DEVICES:=ubnt_unifi-6-lr-v1-ubootmod
|
|
BUILD_SUBTARGET:=mt7622
|
|
UBOOT_IMAGE:=u-boot.fip
|
|
BL2_BOOTDEV:=nor
|
|
BL2_DDRBLOB:=2
|
|
DEPENDS:=+trusted-firmware-a-mt7622-nor-2ddr
|
|
FIP_COMPRESS:=1
|
|
endef
|
|
|
|
define U-Boot/mt7622_ubnt_unifi-6-lr-v2
|
|
NAME:=Ubiquiti UniFi 6 LR v2
|
|
UBOOT_CONFIG:=mt7622_ubnt_unifi-6-lr-v2
|
|
BUILD_DEVICES:=ubnt_unifi-6-lr-v2-ubootmod
|
|
BUILD_SUBTARGET:=mt7622
|
|
UBOOT_IMAGE:=u-boot.fip
|
|
BL2_BOOTDEV:=nor
|
|
BL2_DDRBLOB:=2
|
|
DEPENDS:=+trusted-firmware-a-mt7622-nor-2ddr
|
|
FIP_COMPRESS:=1
|
|
endef
|
|
|
|
define U-Boot/mt7622_ubnt_unifi-6-lr-v3
|
|
NAME:=Ubiquiti UniFi 6 LR v3
|
|
UBOOT_CONFIG:=mt7622_ubnt_unifi-6-lr-v3
|
|
BUILD_DEVICES:=ubnt_unifi-6-lr-v3-ubootmod
|
|
BUILD_SUBTARGET:=mt7622
|
|
UBOOT_IMAGE:=u-boot.fip
|
|
BL2_BOOTDEV:=nor
|
|
BL2_DDRBLOB:=2
|
|
DEPENDS:=+trusted-firmware-a-mt7622-nor-2ddr
|
|
FIP_COMPRESS:=1
|
|
endef
|
|
|
|
define U-Boot/mt7622_xiaomi_redmi-router-ax6s-ubi-loader
|
|
NAME:=Xiaomi Redmi Router AX6S (as UBI loader)
|
|
UBOOT_CONFIG:=mt7622_xiaomi_redmi-router-ax6s-ubi-loader
|
|
BUILD_DEVICES:=xiaomi_redmi-router-ax6s
|
|
BUILD_SUBTARGET:=mt7622
|
|
UBOOT_IMAGE:=u-boot.bin
|
|
endef
|
|
|
|
define U-Boot/mt7623a_unielec_u7623
|
|
NAME:=UniElec U7623 (mt7623)
|
|
BUILD_DEVICES:=unielec_u7623-02
|
|
BUILD_SUBTARGET:=mt7623
|
|
UBOOT_CONFIG:=mt7623a_unielec_u7623_02
|
|
endef
|
|
|
|
define U-Boot/mt7623n_bpir2
|
|
NAME:=Banana Pi R2 (mt7623)
|
|
BUILD_DEVICES:=bananapi_bpi-r2
|
|
BUILD_SUBTARGET:=mt7623
|
|
UBOOT_IMAGE:=u-boot.bin
|
|
UBOOT_CONFIG:=mt7623n_bpir2
|
|
endef
|
|
|
|
define U-Boot/mt7628_rfb
|
|
NAME:=MT7628 Reference Board
|
|
BUILD_DEVICES:=mediatek_mt7628an-eval-board
|
|
BUILD_TARGET:=ramips
|
|
BUILD_SUBTARGET:=mt76x8
|
|
UBOOT_CONFIG:=mt7628_rfb
|
|
UBOOT_IMAGE:=u-boot-with-spl.bin
|
|
endef
|
|
|
|
define U-Boot/mt7628_ravpower_rp-wd009
|
|
NAME:=RAVPower RP-WD009
|
|
BUILD_TARGET:=ramips
|
|
BUILD_DEVICES:=ravpower_rp-wd009
|
|
BUILD_SUBTARGET:=mt76x8
|
|
UBOOT_CONFIG:=ravpower-rp-wd009-ram
|
|
UBOOT_IMAGE:=u-boot.bin
|
|
endef
|
|
|
|
define U-Boot/mt7629_rfb
|
|
NAME:=MT7629 Reference Board
|
|
BUILD_SUBTARGET:=mt7629
|
|
BUILD_DEVICES:=mediatek_mt7629-rfb
|
|
UBOOT_CONFIG:=mt7629_rfb
|
|
endef
|
|
|
|
define U-Boot/mt7981_abt_asr3000
|
|
NAME:=ABT ASR3000
|
|
BUILD_SUBTARGET:=filogic
|
|
BUILD_DEVICES:=abt_asr3000
|
|
UBOOT_CONFIG:=mt7981_abt_asr3000
|
|
UBOOT_IMAGE:=u-boot.fip
|
|
BL2_BOOTDEV:=spim-nand
|
|
BL2_SOC:=mt7981
|
|
BL2_DDRTYPE:=ddr3
|
|
DEPENDS:=+trusted-firmware-a-mt7981-spim-nand-ddr3
|
|
endef
|
|
|
|
define U-Boot/mt7981_cetron_ct3003
|
|
NAME:=Cetron CT3003
|
|
BUILD_SUBTARGET:=filogic
|
|
BUILD_DEVICES:=cetron_ct3003-ubootmod
|
|
UBOOT_CONFIG:=mt7981_cetron_ct3003
|
|
UBOOT_IMAGE:=u-boot.fip
|
|
BL2_BOOTDEV:=spim-nand
|
|
BL2_SOC:=mt7981
|
|
BL2_DDRTYPE:=ddr3
|
|
DEPENDS:=+trusted-firmware-a-mt7981-spim-nand-ddr3
|
|
endef
|
|
|
|
define U-Boot/mt7981_cmcc_a10
|
|
NAME:=CMCC A10
|
|
BUILD_SUBTARGET:=filogic
|
|
BUILD_DEVICES:=cmcc_a10-ubootmod
|
|
UBOOT_CONFIG:=mt7981_cmcc_a10
|
|
UBOOT_IMAGE:=u-boot.fip
|
|
BL2_BOOTDEV:=spim-nand
|
|
BL2_SOC:=mt7981
|
|
BL2_DDRTYPE:=ddr3
|
|
DEPENDS:=+trusted-firmware-a-mt7981-spim-nand-ddr3
|
|
endef
|
|
|
|
define U-Boot/mt7981_cmcc_rax3000m-emmc
|
|
NAME:=CMCC RAX3000M
|
|
BUILD_SUBTARGET:=filogic
|
|
BUILD_DEVICES:=cmcc_rax3000m
|
|
UBOOT_CONFIG:=mt7981_cmcc_rax3000m-emmc
|
|
UBOOT_IMAGE:=u-boot.fip
|
|
BL2_BOOTDEV:=emmc
|
|
BL2_SOC:=mt7981
|
|
BL2_DDRTYPE:=ddr4
|
|
DEPENDS:=+trusted-firmware-a-mt7981-emmc-ddr4
|
|
endef
|
|
|
|
define U-Boot/mt7981_cmcc_rax3000m-nand
|
|
NAME:=CMCC RAX3000M
|
|
BUILD_SUBTARGET:=filogic
|
|
BUILD_DEVICES:=cmcc_rax3000m
|
|
UBOOT_CONFIG:=mt7981_cmcc_rax3000m-nand
|
|
UBOOT_IMAGE:=u-boot.fip
|
|
BL2_BOOTDEV:=spim-nand
|
|
BL2_SOC:=mt7981
|
|
BL2_DDRTYPE:=ddr4
|
|
DEPENDS:=+trusted-firmware-a-mt7981-spim-nand-ddr4
|
|
endef
|
|
|
|
define U-Boot/mt7981_cmcc_rax3000me-emmc
|
|
NAME:=CMCC RAX3000Me
|
|
BUILD_SUBTARGET:=filogic
|
|
BUILD_DEVICES:=cmcc_rax3000me
|
|
UBOOT_CONFIG:=mt7981_cmcc_rax3000me-emmc
|
|
UBOOT_IMAGE:=u-boot.fip
|
|
BL2_BOOTDEV:=emmc
|
|
BL2_SOC:=mt7981
|
|
BL2_DDRTYPE:=ddr3
|
|
DEPENDS:=+trusted-firmware-a-mt7981-emmc-ddr3
|
|
endef
|
|
|
|
define U-Boot/mt7981_cmcc_rax3000me-nand-ddr3
|
|
NAME:=CMCC RAX3000Me
|
|
BUILD_SUBTARGET:=filogic
|
|
BUILD_DEVICES:=cmcc_rax3000me
|
|
UBOOT_CONFIG:=mt7981_cmcc_rax3000me-nand-ddr3
|
|
UBOOT_IMAGE:=u-boot.fip
|
|
BL2_BOOTDEV:=spim-nand
|
|
BL2_SOC:=mt7981
|
|
BL2_DDRTYPE:=ddr3
|
|
DEPENDS:=+trusted-firmware-a-mt7981-spim-nand-ddr3
|
|
endef
|
|
|
|
define U-Boot/mt7981_cmcc_rax3000me-nand-ddr4
|
|
NAME:=CMCC RAX3000Me
|
|
BUILD_SUBTARGET:=filogic
|
|
BUILD_DEVICES:=cmcc_rax3000me
|
|
UBOOT_CONFIG:=mt7981_cmcc_rax3000me-nand-ddr4
|
|
UBOOT_IMAGE:=u-boot.fip
|
|
BL2_BOOTDEV:=spim-nand
|
|
BL2_SOC:=mt7981
|
|
BL2_DDRTYPE:=ddr4
|
|
DEPENDS:=+trusted-firmware-a-mt7981-spim-nand-ddr4
|
|
endef
|
|
|
|
define U-Boot/mt7981_cudy_tr3000-v1
|
|
NAME:=Cudy TR3000 v1
|
|
BUILD_SUBTARGET:=filogic
|
|
BUILD_DEVICES:=cudy_tr3000-v1-ubootmod
|
|
UBOOT_CONFIG:=mt7981_cudy_tr3000-v1
|
|
UBOOT_IMAGE:=u-boot.fip
|
|
BL2_BOOTDEV:=cudy-tr3000-v1
|
|
BL2_SOC:=mt7981
|
|
DEPENDS:=+trusted-firmware-a-mt7981-cudy-tr3000-v1
|
|
endef
|
|
|
|
define U-Boot/mt7981_glinet_gl-x3000
|
|
NAME:=GL.iNet GL-X3000
|
|
BUILD_SUBTARGET:=filogic
|
|
BUILD_DEVICES:=glinet_gl-x3000
|
|
UBOOT_CONFIG:=mt7981_glinet_gl-x3000
|
|
UBOOT_IMAGE:=u-boot.fip
|
|
BL2_BOOTDEV:=emmc
|
|
BL2_SOC:=mt7981
|
|
BL2_DDRTYPE:=ddr4
|
|
DEPENDS:=+trusted-firmware-a-mt7981-emmc-ddr4
|
|
endef
|
|
|
|
define U-Boot/mt7981_glinet_gl-xe3000
|
|
NAME:=GL.iNet GL-XE3000
|
|
BUILD_SUBTARGET:=filogic
|
|
BUILD_DEVICES:=glinet_gl-xe3000
|
|
UBOOT_CONFIG:=mt7981_glinet_gl-x3000
|
|
UBOOT_IMAGE:=u-boot.fip
|
|
BL2_BOOTDEV:=emmc
|
|
BL2_SOC:=mt7981
|
|
BL2_DDRTYPE:=ddr4
|
|
DEPENDS:=+trusted-firmware-a-mt7981-emmc-ddr4
|
|
endef
|
|
|
|
define U-Boot/mt7981_h3c_magic-nx30-pro
|
|
NAME:=H3C Magic NX30 Pro
|
|
BUILD_SUBTARGET:=filogic
|
|
BUILD_DEVICES:=h3c_magic-nx30-pro
|
|
UBOOT_CONFIG:=mt7981_h3c_magic-nx30-pro
|
|
UBOOT_IMAGE:=u-boot.fip
|
|
BL2_BOOTDEV:=spim-nand
|
|
BL2_SOC:=mt7981
|
|
BL2_DDRTYPE:=ddr3
|
|
DEPENDS:=+trusted-firmware-a-mt7981-spim-nand-ddr3
|
|
endef
|
|
|
|
define U-Boot/mt7981_imou_lc-hx3001
|
|
NAME:=Imou LC-HX3001
|
|
BUILD_SUBTARGET:=filogic
|
|
BUILD_DEVICES:=imou_lc-hx3001
|
|
UBOOT_CONFIG:=mt7981_imou_lc-hx3001
|
|
UBOOT_IMAGE:=u-boot.fip
|
|
BL2_BOOTDEV:=spim-nand
|
|
BL2_SOC:=mt7981
|
|
BL2_DDRTYPE:=ddr3
|
|
DEPENDS:=+trusted-firmware-a-mt7981-spim-nand-ddr3
|
|
endef
|
|
|
|
define U-Boot/mt7981_jcg_q30-pro
|
|
NAME:=JCG Q30 PRO
|
|
BUILD_SUBTARGET:=filogic
|
|
BUILD_DEVICES:=jcg_q30-pro
|
|
UBOOT_CONFIG:=mt7981_jcg_q30-pro
|
|
UBOOT_IMAGE:=u-boot.fip
|
|
BL2_BOOTDEV:=spim-nand
|
|
BL2_SOC:=mt7981
|
|
BL2_DDRTYPE:=ddr3
|
|
DEPENDS:=+trusted-firmware-a-mt7981-spim-nand-ddr3
|
|
endef
|
|
|
|
define U-Boot/mt7981_konka_komi-a31
|
|
NAME:=Konka KOMI A31
|
|
BUILD_SUBTARGET:=filogic
|
|
BUILD_DEVICES:=konka_komi-a31
|
|
UBOOT_CONFIG:=mt7981_konka_komi-a31
|
|
UBOOT_IMAGE:=u-boot.fip
|
|
BL2_BOOTDEV:=spim-nand
|
|
BL2_SOC:=mt7981
|
|
BL2_DDRTYPE:=ddr3
|
|
DEPENDS:=+trusted-firmware-a-mt7981-spim-nand-ddr3
|
|
endef
|
|
|
|
define U-Boot/mt7981_konka_komi-a31-emmc
|
|
NAME:=Konka KOMI A31 eMMC
|
|
BUILD_SUBTARGET:=filogic
|
|
BUILD_DEVICES:=konka_komi-a31
|
|
UBOOT_CONFIG:=mt7981_konka_komi-a31-emmc
|
|
UBOOT_IMAGE:=u-boot.fip
|
|
BL2_BOOTDEV:=emmc
|
|
BL2_SOC:=mt7981
|
|
BL2_DDRTYPE:=ddr3
|
|
DEPENDS:=+trusted-firmware-a-mt7981-emmc-ddr3
|
|
endef
|
|
|
|
define U-Boot/mt7981_konka_komi-a31-nor
|
|
NAME:=Konka KOMI A31 NOR
|
|
BUILD_SUBTARGET:=filogic
|
|
BUILD_DEVICES:=konka_komi-a31
|
|
UBOOT_CONFIG:=mt7981_konka_komi-a31-nor
|
|
UBOOT_IMAGE:=u-boot.fip
|
|
BL2_BOOTDEV:=nor
|
|
BL2_SOC:=mt7981
|
|
BL2_DDRTYPE:=ddr3
|
|
FIP_COMPRESS:=1
|
|
DEPENDS:=+trusted-firmware-a-mt7981-nor-ddr3
|
|
endef
|
|
|
|
define U-Boot/mt7981_livinet_zr-3020
|
|
NAME:=Livinet ZR-3020
|
|
BUILD_SUBTARGET:=filogic
|
|
BUILD_DEVICES:=livinet_zr-3020-ubootmod
|
|
UBOOT_CONFIG:=mt7981_livinet_zr-3020
|
|
UBOOT_IMAGE:=u-boot.fip
|
|
BL2_BOOTDEV:=spim-nand
|
|
BL2_SOC:=mt7981
|
|
BL2_DDRTYPE:=ddr3
|
|
DEPENDS:=+trusted-firmware-a-mt7981-spim-nand-ddr3
|
|
endef
|
|
|
|
define U-Boot/mt7981_nokia_ea0326gmp
|
|
NAME:=Nokia EA0326GMP
|
|
BUILD_SUBTARGET:=filogic
|
|
BUILD_DEVICES:=nokia_ea0326gmp
|
|
UBOOT_CONFIG:=mt7981_nokia_ea0326gmp
|
|
UBOOT_IMAGE:=u-boot.fip
|
|
BL2_BOOTDEV:=spim-nand
|
|
BL2_SOC:=mt7981
|
|
BL2_DDRTYPE:=ddr3
|
|
DEPENDS:=+trusted-firmware-a-mt7981-spim-nand-ddr3
|
|
endef
|
|
|
|
define U-Boot/mt7981_openwrt_one-snand
|
|
NAME:=OpenWrt One NAND
|
|
BUILD_SUBTARGET:=filogic
|
|
BUILD_DEVICES:=openwrt_one
|
|
UBOOT_CONFIG:=mt7981_openwrt-one-spi-nand
|
|
UBOOT_IMAGE:=u-boot.fip
|
|
BL2_BOOTDEV:=spim-nand-ubi
|
|
BL2_SOC:=mt7981
|
|
BL2_DDRTYPE:=ddr4
|
|
DEPENDS:=+trusted-firmware-a-mt7981-spim-nand-ubi-ddr4
|
|
endef
|
|
|
|
define U-Boot/mt7981_openwrt_one-nor
|
|
NAME:=OpenWrt One NOR
|
|
BUILD_SUBTARGET:=filogic
|
|
BUILD_DEVICES:=openwrt_one
|
|
UBOOT_CONFIG:=mt7981_openwrt-one-nor
|
|
UBOOT_IMAGE:=u-boot.fip
|
|
BL2_BOOTDEV:=nor
|
|
BL2_SOC:=mt7981
|
|
BL2_DDRTYPE:=ddr4
|
|
FIP_COMPRESS:=1
|
|
DEPENDS:=+trusted-firmware-a-mt7981-nor-ddr4
|
|
endef
|
|
|
|
define U-Boot/mt7981_rfb-spim-nand
|
|
NAME:=MT7981 Reference Board
|
|
BUILD_SUBTARGET:=filogic
|
|
BUILD_DEVICES:=mediatek_mt7981-rfb
|
|
UBOOT_CONFIG:=mt7981_rfb
|
|
UBOOT_IMAGE:=u-boot.fip
|
|
BL2_BOOTDEV:=spim-nand
|
|
BL2_SOC:=mt7981
|
|
BL2_DDRTYPE:=ddr3
|
|
DEPENDS:=+trusted-firmware-a-mt7981-spim-nand-ddr3
|
|
endef
|
|
|
|
define U-Boot/mt7981_rfb-emmc
|
|
NAME:=MT7981 Reference Board
|
|
BUILD_SUBTARGET:=filogic
|
|
BUILD_DEVICES:=mediatek_mt7981-rfb
|
|
UBOOT_CONFIG:=mt7981_emmc_rfb
|
|
UBOOT_IMAGE:=u-boot.fip
|
|
BL2_BOOTDEV:=emmc
|
|
BL2_SOC:=mt7981
|
|
BL2_DDRTYPE:=ddr3
|
|
DEPENDS:=+trusted-firmware-a-mt7981-emmc-ddr3
|
|
endef
|
|
|
|
define U-Boot/mt7981_gatonetworks_gdsp
|
|
NAME:=GatoNetworks GDSP
|
|
BUILD_SUBTARGET:=filogic
|
|
BUILD_DEVICES:=gatonetworks_gdsp
|
|
UBOOT_CONFIG:=mt7981_gatonetworks_gdsp
|
|
UBOOT_IMAGE:=u-boot.fip
|
|
BL2_BOOTDEV:=nor
|
|
BL2_SOC:=mt7981
|
|
BL2_DDRTYPE:=ddr3
|
|
DEPENDS:=+trusted-firmware-a-mt7981-nor-ddr3
|
|
FIP_COMPRESS:=1
|
|
endef
|
|
|
|
define U-Boot/mt7981_rfb-nor
|
|
NAME:=MT7981 Reference Board
|
|
BUILD_SUBTARGET:=filogic
|
|
BUILD_DEVICES:=mediatek_mt7981-rfb
|
|
UBOOT_CONFIG:=mt7981_nor_rfb
|
|
UBOOT_IMAGE:=u-boot.fip
|
|
BL2_BOOTDEV:=nor
|
|
BL2_SOC:=mt7981
|
|
BL2_DDRTYPE:=ddr3
|
|
DEPENDS:=+trusted-firmware-a-mt7981-nor-ddr3
|
|
endef
|
|
|
|
define U-Boot/mt7981_rfb-sd
|
|
NAME:=MT7981 Reference Board
|
|
BUILD_SUBTARGET:=filogic
|
|
BUILD_DEVICES:=mediatek_mt7981-rfb
|
|
UBOOT_CONFIG:=mt7981_sd_rfb
|
|
UBOOT_IMAGE:=u-boot.fip
|
|
BL2_BOOTDEV:=sdmmc
|
|
BL2_SOC:=mt7981
|
|
BL2_DDRTYPE:=ddr3
|
|
DEPENDS:=+trusted-firmware-a-mt7981-sdmmc-ddr3
|
|
endef
|
|
|
|
define U-Boot/mt7981_rfb-snfi
|
|
NAME:=MT7981 Reference Board
|
|
BUILD_SUBTARGET:=filogic
|
|
BUILD_DEVICES:=mediatek_mt7981-rfb
|
|
UBOOT_CONFIG:=mt7981_snfi_nand_rfb
|
|
UBOOT_IMAGE:=u-boot.fip
|
|
BL2_BOOTDEV:=snand
|
|
BL2_SOC:=mt7981
|
|
BL2_DDRTYPE:=ddr3
|
|
DEPENDS:=+trusted-firmware-a-mt7981-snand-ddr3
|
|
endef
|
|
|
|
define U-Boot/mt7981_routerich_ax3000
|
|
NAME:=Routerich AX3000
|
|
BUILD_SUBTARGET:=filogic
|
|
BUILD_DEVICES:=routerich_ax3000-ubootmod
|
|
UBOOT_CONFIG:=mt7981_routerich_ax3000
|
|
UBOOT_IMAGE:=u-boot.fip
|
|
BL2_BOOTDEV:=spim-nand
|
|
BL2_SOC:=mt7981
|
|
BL2_DDRTYPE:=ddr3
|
|
DEPENDS:=+trusted-firmware-a-mt7981-spim-nand-ddr3
|
|
endef
|
|
|
|
define U-Boot/mt7981_qihoo_360t7
|
|
NAME:=Qihoo 360T7
|
|
BUILD_SUBTARGET:=filogic
|
|
BUILD_DEVICES:=qihoo_360t7
|
|
UBOOT_CONFIG:=mt7981_qihoo-360t7
|
|
UBOOT_IMAGE:=u-boot.fip
|
|
BL2_BOOTDEV:=spim-nand
|
|
BL2_SOC:=mt7981
|
|
BL2_DDRTYPE:=ddr3
|
|
DEPENDS:=+trusted-firmware-a-mt7981-spim-nand-ddr3
|
|
endef
|
|
|
|
define U-Boot/mt7981_xiaomi_mi-router-ax3000t
|
|
NAME:=Xiaomi Router AX3000T
|
|
BUILD_SUBTARGET:=filogic
|
|
BUILD_DEVICES:=xiaomi_mi-router-ax3000t-ubootmod
|
|
UBOOT_CONFIG:=mt7981_xiaomi_mi-router-ax3000t
|
|
UBOOT_IMAGE:=u-boot.fip
|
|
BL2_BOOTDEV:=spim-nand
|
|
BL2_SOC:=mt7981
|
|
BL2_DDRTYPE:=ddr3
|
|
DEPENDS:=+trusted-firmware-a-mt7981-spim-nand-ddr3
|
|
endef
|
|
|
|
define U-Boot/mt7981_xiaomi_mi-router-wr30u
|
|
NAME:=Xiaomi Router WR30U
|
|
BUILD_SUBTARGET:=filogic
|
|
BUILD_DEVICES:=xiaomi_mi-router-wr30u-ubootmod
|
|
UBOOT_CONFIG:=mt7981_xiaomi_mi-router-wr30u
|
|
UBOOT_IMAGE:=u-boot.fip
|
|
BL2_BOOTDEV:=spim-nand
|
|
BL2_SOC:=mt7981
|
|
BL2_DDRTYPE:=ddr3
|
|
DEPENDS:=+trusted-firmware-a-mt7981-spim-nand-ddr3
|
|
endef
|
|
|
|
define U-Boot/mt7986_rfb
|
|
NAME:=MT7986 Reference Board
|
|
BUILD_SUBTARGET:=filogic
|
|
BUILD_DEVICES:=mediatek_mt7986-rfb
|
|
UBOOT_CONFIG:=mt7986_rfb
|
|
UBOOT_IMAGE:=u-boot.fip
|
|
BL2_BOOTDEV:=sdmmc
|
|
BL2_SOC:=mt7986
|
|
BL2_DDRTYPE:=ddr4
|
|
DEPENDS:=+trusted-firmware-a-mt7986-sdmmc-ddr4
|
|
endef
|
|
|
|
define U-Boot/mt7986_bananapi_bpi-r3-emmc
|
|
NAME:=BananaPi BPi-R3
|
|
BUILD_SUBTARGET:=filogic
|
|
BUILD_DEVICES:=bananapi_bpi-r3
|
|
UBOOT_CONFIG:=mt7986a_bpi-r3-emmc
|
|
UBOOT_IMAGE:=u-boot.fip
|
|
BL2_BOOTDEV:=emmc
|
|
BL2_SOC:=mt7986
|
|
BL2_DDRTYPE:=ddr4
|
|
DEPENDS:=+trusted-firmware-a-mt7986-emmc-ddr4
|
|
endef
|
|
|
|
define U-Boot/mt7986_bananapi_bpi-r3-sdmmc
|
|
NAME:=BananaPi BPi-R3
|
|
BUILD_SUBTARGET:=filogic
|
|
BUILD_DEVICES:=bananapi_bpi-r3
|
|
UBOOT_CONFIG:=mt7986a_bpi-r3-sd
|
|
UBOOT_IMAGE:=u-boot.fip
|
|
BL2_BOOTDEV:=sdmmc
|
|
BL2_SOC:=mt7986
|
|
BL2_DDRTYPE:=ddr4
|
|
DEPENDS:=+trusted-firmware-a-mt7986-sdmmc-ddr4
|
|
endef
|
|
|
|
define U-Boot/mt7986_bananapi_bpi-r3-snand
|
|
NAME:=BananaPi BPi-R3
|
|
BUILD_SUBTARGET:=filogic
|
|
BUILD_DEVICES:=bananapi_bpi-r3
|
|
UBOOT_CONFIG:=mt7986a_bpi-r3-snand
|
|
UBOOT_IMAGE:=u-boot.fip
|
|
BL2_BOOTDEV:=spim-nand-ubi
|
|
BL2_SOC:=mt7986
|
|
BL2_DDRTYPE:=ddr4
|
|
DEPENDS:=+trusted-firmware-a-mt7986-spim-nand-ubi-ddr4
|
|
endef
|
|
|
|
define U-Boot/mt7986_bananapi_bpi-r3-nor
|
|
NAME:=BananaPi BPi-R3
|
|
BUILD_SUBTARGET:=filogic
|
|
BUILD_DEVICES:=bananapi_bpi-r3
|
|
UBOOT_CONFIG:=mt7986a_bpi-r3-nor
|
|
UBOOT_IMAGE:=u-boot.fip
|
|
BL2_BOOTDEV:=nor
|
|
BL2_SOC:=mt7986
|
|
BL2_DDRTYPE:=ddr4
|
|
DEPENDS:=+trusted-firmware-a-mt7986-nor-ddr4
|
|
FIP_COMPRESS:=1
|
|
endef
|
|
|
|
define U-Boot/mt7986_bananapi_bpi-r3-mini-emmc
|
|
NAME:=BananaPi BPi-R3 Mini
|
|
BUILD_SUBTARGET:=filogic
|
|
BUILD_DEVICES:=bananapi_bpi-r3-mini
|
|
UBOOT_CONFIG:=mt7986a_bpi-r3-mini-emmc
|
|
UBOOT_IMAGE:=u-boot.fip
|
|
BL2_BOOTDEV:=emmc
|
|
BL2_SOC:=mt7986
|
|
BL2_DDRTYPE:=ddr4
|
|
DEPENDS:=+trusted-firmware-a-mt7986-emmc-ddr4
|
|
endef
|
|
|
|
define U-Boot/mt7986_bananapi_bpi-r3-mini-snand
|
|
NAME:=BananaPi BPi-R3 Mini
|
|
BUILD_SUBTARGET:=filogic
|
|
BUILD_DEVICES:=bananapi_bpi-r3-mini
|
|
UBOOT_CONFIG:=mt7986a_bpi-r3-mini-snand
|
|
UBOOT_IMAGE:=u-boot.fip
|
|
BL2_BOOTDEV:=spim-nand-ubi
|
|
BL2_SOC:=mt7986
|
|
BL2_DDRTYPE:=ddr4
|
|
DEPENDS:=+trusted-firmware-a-mt7986-spim-nand-ubi-ddr4
|
|
endef
|
|
|
|
define U-Boot/mt7986_glinet_gl-mt6000
|
|
NAME:=GL.iNet GL-MT6000
|
|
BUILD_SUBTARGET:=filogic
|
|
BUILD_DEVICES:=glinet_gl-mt6000
|
|
UBOOT_CONFIG:=mt7986a_glinet_gl-mt6000
|
|
UBOOT_IMAGE:=u-boot.fip
|
|
BL2_BOOTDEV:=emmc
|
|
BL2_SOC:=mt7986
|
|
BL2_DDRTYPE:=ddr4
|
|
DEPENDS:=+trusted-firmware-a-mt7986-emmc-ddr4
|
|
endef
|
|
|
|
define U-Boot/mt7986_jdcloud_re-cp-03
|
|
NAME:=JDCloud RE-CP-03
|
|
BUILD_SUBTARGET:=filogic
|
|
BUILD_DEVICES:=jdcloud_re-cp-03
|
|
UBOOT_CONFIG:=mt7986a_jdcloud_re-cp-03
|
|
UBOOT_IMAGE:=u-boot.fip
|
|
BL2_BOOTDEV:=emmc
|
|
BL2_SOC:=mt7986
|
|
BL2_DDRTYPE:=ddr4
|
|
DEPENDS:=+trusted-firmware-a-mt7986-emmc-ddr4
|
|
endef
|
|
|
|
define U-Boot/mt7986_mercusys_mr90x-v1
|
|
NAME:=MERCUSYS MR90X v1
|
|
BUILD_SUBTARGET:=filogic
|
|
BUILD_DEVICES:=mercusys_mr90x-v1-ubi
|
|
UBOOT_CONFIG:=mt7986_mercusys_mr90x-v1
|
|
UBOOT_IMAGE:=u-boot.fip
|
|
BL2_BOOTDEV:=spim-nand-ubi
|
|
BL2_SOC:=mt7986
|
|
BL2_DDRTYPE:=ddr3
|
|
DEPENDS:=+trusted-firmware-a-mt7986-spim-nand-ubi-ddr3
|
|
endef
|
|
|
|
define U-Boot/mt7986_netcore_n60
|
|
NAME:=Netcore N60
|
|
BUILD_SUBTARGET:=filogic
|
|
BUILD_DEVICES:=netcore_n60
|
|
UBOOT_CONFIG:=mt7986_netcore_n60
|
|
UBOOT_IMAGE:=u-boot.fip
|
|
BL2_BOOTDEV:=spim-nand
|
|
BL2_SOC:=mt7986
|
|
BL2_DDRTYPE:=ddr3
|
|
DEPENDS:=+trusted-firmware-a-mt7986-spim-nand-ddr3
|
|
endef
|
|
|
|
define U-Boot/mt7986_tplink_tl-xdr4288
|
|
NAME:=TP-LINK TL-XDR4288
|
|
BUILD_SUBTARGET:=filogic
|
|
BUILD_DEVICES:=tplink_tl-xdr4288
|
|
UBOOT_CONFIG:=mt7986_tplink_tl-xdr4288
|
|
UBOOT_IMAGE:=u-boot.fip
|
|
BL2_BOOTDEV:=spim-nand
|
|
BL2_SOC:=mt7986
|
|
BL2_DDRTYPE:=ddr3
|
|
DEPENDS:=+trusted-firmware-a-mt7986-spim-nand-ddr3
|
|
endef
|
|
|
|
define U-Boot/mt7986_tplink_tl-xdr6086
|
|
NAME:=TP-LINK TL-XDR6086
|
|
BUILD_SUBTARGET:=filogic
|
|
BUILD_DEVICES:=tplink_tl-xdr6086
|
|
UBOOT_CONFIG:=mt7986_tplink_tl-xdr6086
|
|
UBOOT_IMAGE:=u-boot.fip
|
|
BL2_BOOTDEV:=spim-nand
|
|
BL2_SOC:=mt7986
|
|
BL2_DDRTYPE:=ddr3
|
|
DEPENDS:=+trusted-firmware-a-mt7986-spim-nand-ddr3
|
|
endef
|
|
|
|
define U-Boot/mt7986_tplink_tl-xdr6088
|
|
NAME:=TP-LINK TL-XDR6088
|
|
BUILD_SUBTARGET:=filogic
|
|
BUILD_DEVICES:=tplink_tl-xdr6088
|
|
UBOOT_CONFIG:=mt7986_tplink_tl-xdr6088
|
|
UBOOT_IMAGE:=u-boot.fip
|
|
BL2_BOOTDEV:=spim-nand
|
|
BL2_SOC:=mt7986
|
|
BL2_DDRTYPE:=ddr3
|
|
DEPENDS:=+trusted-firmware-a-mt7986-spim-nand-ddr3
|
|
endef
|
|
|
|
define U-Boot/mt7986_tplink_tl-xtr8488
|
|
NAME:=TP-LINK TL-XTR8488
|
|
BUILD_SUBTARGET:=filogic
|
|
BUILD_DEVICES:=tplink_tl-xtr8488
|
|
UBOOT_CONFIG:=mt7986_tplink_tl-xtr8488
|
|
UBOOT_IMAGE:=u-boot.fip
|
|
BL2_BOOTDEV:=spim-nand
|
|
BL2_SOC:=mt7986
|
|
BL2_DDRTYPE:=ddr4
|
|
DEPENDS:=+trusted-firmware-a-mt7986-spim-nand-ddr4
|
|
endef
|
|
|
|
define U-Boot/mt7986_xiaomi_redmi-router-ax6000
|
|
NAME:=Xiaomi Redmi AX6000
|
|
BUILD_SUBTARGET:=filogic
|
|
BUILD_DEVICES:=xiaomi_redmi-router-ax6000-ubootmod
|
|
UBOOT_CONFIG:=mt7986_xiaomi_redmi-ax6000
|
|
UBOOT_IMAGE:=u-boot.fip
|
|
BL2_BOOTDEV:=spim-nand
|
|
BL2_SOC:=mt7986
|
|
BL2_DDRTYPE:=ddr4
|
|
DEPENDS:=+trusted-firmware-a-mt7986-spim-nand-ddr4
|
|
endef
|
|
|
|
define U-Boot/mt7986_zyxel_ex5601-t0
|
|
NAME:=Zyxel EX5601-T0
|
|
BUILD_SUBTARGET:=filogic
|
|
BUILD_DEVICES:=zyxel_ex5601-t0-ubootmod
|
|
UBOOT_CONFIG:=mt7986_zyxel_ex5601-t0
|
|
UBOOT_IMAGE:=u-boot.fip
|
|
BL2_BOOTDEV:=spim-nand-4k
|
|
BL2_SOC:=mt7986
|
|
BL2_DDRTYPE:=ddr4
|
|
DEPENDS:=+trusted-firmware-a-mt7986-spim-nand-4k-ddr4
|
|
endef
|
|
|
|
define U-Boot/mt7988_arcadyan_mozart
|
|
NAME:=Arcadyan Mozart
|
|
BUILD_SUBTARGET:=filogic
|
|
BUILD_DEVICES:=arcadyan_mozart
|
|
UBOOT_CONFIG:=mt7988a_arcadyan_mozart
|
|
UBOOT_IMAGE:=u-boot.fip
|
|
BL2_BOOTDEV:=emmc
|
|
BL2_SOC:=mt7988
|
|
BL2_DDRTYPE:=comb
|
|
DEPENDS:=+trusted-firmware-a-mt7988-emmc-comb
|
|
endef
|
|
|
|
define U-Boot/mt7988_bananapi_bpi-r4-emmc
|
|
NAME:=BananaPi BPi-R4
|
|
BUILD_SUBTARGET:=filogic
|
|
BUILD_DEVICES:=bananapi_bpi-r4
|
|
UBOOT_CONFIG:=mt7988a_bananapi_bpi-r4-emmc
|
|
UBOOT_IMAGE:=u-boot.fip
|
|
BL2_BOOTDEV:=emmc
|
|
BL2_SOC:=mt7988
|
|
BL2_DDRTYPE:=comb
|
|
DEPENDS:=+trusted-firmware-a-mt7988-emmc-comb
|
|
endef
|
|
|
|
define U-Boot/mt7988_bananapi_bpi-r4-sdmmc
|
|
NAME:=BananaPi BPi-R4
|
|
BUILD_SUBTARGET:=filogic
|
|
BUILD_DEVICES:=bananapi_bpi-r4
|
|
UBOOT_CONFIG:=mt7988a_bananapi_bpi-r4-sdmmc
|
|
UBOOT_IMAGE:=u-boot.fip
|
|
BL2_BOOTDEV:=sdmmc
|
|
BL2_SOC:=mt7988
|
|
BL2_DDRTYPE:=comb
|
|
DEPENDS:=+trusted-firmware-a-mt7988-sdmmc-comb
|
|
endef
|
|
|
|
define U-Boot/mt7988_bananapi_bpi-r4-snand
|
|
NAME:=BananaPi BPi-R4
|
|
BUILD_SUBTARGET:=filogic
|
|
BUILD_DEVICES:=bananapi_bpi-r4
|
|
UBOOT_CONFIG:=mt7988a_bananapi_bpi-r4-snand
|
|
UBOOT_IMAGE:=u-boot.fip
|
|
BL2_BOOTDEV:=spim-nand-ubi
|
|
BL2_SOC:=mt7988
|
|
BL2_DDRTYPE:=comb
|
|
DEPENDS:=+trusted-firmware-a-mt7988-spim-nand-ubi-comb
|
|
endef
|
|
|
|
define U-Boot/mt7988_bananapi_bpi-r4-poe-emmc
|
|
NAME:=BananaPi BPi-R4 2.5GE
|
|
BUILD_SUBTARGET:=filogic
|
|
BUILD_DEVICES:=bananapi_bpi-r4-poe
|
|
UBOOT_CONFIG:=mt7988a_bananapi_bpi-r4-poe-emmc
|
|
UBOOT_IMAGE:=u-boot.fip
|
|
BL2_BOOTDEV:=emmc
|
|
BL2_SOC:=mt7988
|
|
BL2_DDRTYPE:=comb
|
|
DEPENDS:=+trusted-firmware-a-mt7988-emmc-comb
|
|
endef
|
|
|
|
define U-Boot/mt7988_bananapi_bpi-r4-poe-sdmmc
|
|
NAME:=BananaPi BPi-R4 2.5GE
|
|
BUILD_SUBTARGET:=filogic
|
|
BUILD_DEVICES:=bananapi_bpi-r4-poe
|
|
UBOOT_CONFIG:=mt7988a_bananapi_bpi-r4-poe-sdmmc
|
|
UBOOT_IMAGE:=u-boot.fip
|
|
BL2_BOOTDEV:=sdmmc
|
|
BL2_SOC:=mt7988
|
|
BL2_DDRTYPE:=comb
|
|
DEPENDS:=+trusted-firmware-a-mt7988-sdmmc-comb
|
|
endef
|
|
|
|
define U-Boot/mt7988_bananapi_bpi-r4-poe-snand
|
|
NAME:=BananaPi BPi-R4 2.5GE
|
|
BUILD_SUBTARGET:=filogic
|
|
BUILD_DEVICES:=bananapi_bpi-r4-poe
|
|
UBOOT_CONFIG:=mt7988a_bananapi_bpi-r4-poe-snand
|
|
UBOOT_IMAGE:=u-boot.fip
|
|
BL2_BOOTDEV:=spim-nand-ubi
|
|
BL2_SOC:=mt7988
|
|
BL2_DDRTYPE:=comb
|
|
DEPENDS:=+trusted-firmware-a-mt7988-spim-nand-ubi-comb
|
|
endef
|
|
|
|
define U-Boot/mt7988_rfb-spim-nand
|
|
NAME:=MT7988 Reference Board
|
|
BUILD_SUBTARGET:=filogic
|
|
BUILD_DEVICES:=mediatek_mt7988a-rfb
|
|
UBOOT_CONFIG:=mt7988_rfb
|
|
UBOOT_IMAGE:=u-boot.fip
|
|
BL2_BOOTDEV:=spim-nand
|
|
BL2_SOC:=mt7988
|
|
BL2_DDRTYPE:=comb
|
|
DEPENDS:=+trusted-firmware-a-mt7988-spim-nand-comb +trusted-firmware-a-mt7988-spim-nand-ubi-comb
|
|
endef
|
|
|
|
define U-Boot/mt7988_rfb-snand
|
|
NAME:=MT7988 Reference Board
|
|
BUILD_SUBTARGET:=filogic
|
|
BUILD_DEVICES:=mediatek_mt7988a-rfb
|
|
UBOOT_CONFIG:=mt7988_rfb
|
|
UBOOT_IMAGE:=u-boot.fip
|
|
BL2_BOOTDEV:=snand
|
|
BL2_SOC:=mt7988
|
|
BL2_DDRTYPE:=comb
|
|
DEPENDS:=+trusted-firmware-a-mt7988-snand-comb
|
|
endef
|
|
|
|
define U-Boot/mt7988_rfb-nor
|
|
NAME:=MT7988 Reference Board
|
|
BUILD_SUBTARGET:=filogic
|
|
BUILD_DEVICES:=mediatek_mt7988a-rfb
|
|
UBOOT_CONFIG:=mt7988_rfb
|
|
UBOOT_IMAGE:=u-boot.fip
|
|
BL2_BOOTDEV:=nor
|
|
BL2_SOC:=mt7988
|
|
BL2_DDRTYPE:=comb
|
|
DEPENDS:=+trusted-firmware-a-mt7988-nor-comb
|
|
FIP_COMPRESS:=1
|
|
endef
|
|
|
|
define U-Boot/mt7988_rfb-emmc
|
|
NAME:=MT7988 Reference Board
|
|
BUILD_SUBTARGET:=filogic
|
|
BUILD_DEVICES:=mediatek_mt7988a-rfb
|
|
UBOOT_CONFIG:=mt7988_rfb
|
|
UBOOT_IMAGE:=u-boot.fip
|
|
BL2_BOOTDEV:=emmc
|
|
BL2_SOC:=mt7988
|
|
BL2_DDRTYPE:=comb
|
|
DEPENDS:=+trusted-firmware-a-mt7988-emmc-comb
|
|
endef
|
|
|
|
define U-Boot/mt7988_rfb-sd
|
|
NAME:=MT7988 Reference Board
|
|
BUILD_SUBTARGET:=filogic
|
|
BUILD_DEVICES:=mediatek_mt7988a-rfb
|
|
UBOOT_CONFIG:=mt7988_sd_rfb
|
|
UBOOT_IMAGE:=u-boot.fip
|
|
BL2_BOOTDEV:=sdmmc
|
|
BL2_SOC:=mt7988
|
|
BL2_DDRTYPE:=comb
|
|
DEPENDS:=+trusted-firmware-a-mt7988-sdmmc-comb
|
|
endef
|
|
|
|
UBOOT_TARGETS := \
|
|
mt7620_mt7530_rfb \
|
|
mt7620_rfb \
|
|
mt7621_nand_rfb \
|
|
mt7621_rfb \
|
|
mt7621_zbtlink_zbt-wg3526-16m \
|
|
mt7622_bananapi_bpi-r64-emmc \
|
|
mt7622_bananapi_bpi-r64-sdmmc \
|
|
mt7622_bananapi_bpi-r64-snand \
|
|
mt7622_linksys_e8450 \
|
|
mt7622_rfb1 \
|
|
mt7622_ubnt_unifi-6-lr-v1 \
|
|
mt7622_ubnt_unifi-6-lr-v2 \
|
|
mt7622_ubnt_unifi-6-lr-v3 \
|
|
mt7622_xiaomi_redmi-router-ax6s-ubi-loader \
|
|
mt7623n_bpir2 \
|
|
mt7623a_unielec_u7623 \
|
|
mt7628_rfb \
|
|
mt7628_ravpower_rp-wd009 \
|
|
mt7629_rfb \
|
|
mt7981_abt_asr3000 \
|
|
mt7981_cetron_ct3003 \
|
|
mt7981_cmcc_a10 \
|
|
mt7981_cmcc_rax3000m-emmc \
|
|
mt7981_cmcc_rax3000m-nand \
|
|
mt7981_cmcc_rax3000me-emmc \
|
|
mt7981_cmcc_rax3000me-nand-ddr3 \
|
|
mt7981_cmcc_rax3000me-nand-ddr4 \
|
|
mt7981_cudy_tr3000-v1 \
|
|
mt7981_gatonetworks_gdsp \
|
|
mt7981_glinet_gl-x3000 \
|
|
mt7981_glinet_gl-xe3000 \
|
|
mt7981_h3c_magic-nx30-pro \
|
|
mt7981_imou_lc-hx3001 \
|
|
mt7981_jcg_q30-pro \
|
|
mt7981_konka_komi-a31 \
|
|
mt7981_konka_komi-a31-emmc \
|
|
mt7981_konka_komi-a31-nor \
|
|
mt7981_livinet_zr-3020 \
|
|
mt7981_nokia_ea0326gmp \
|
|
mt7981_openwrt_one-snand \
|
|
mt7981_openwrt_one-nor \
|
|
mt7981_rfb-spim-nand \
|
|
mt7981_rfb-emmc \
|
|
mt7981_rfb-nor \
|
|
mt7981_rfb-sd \
|
|
mt7981_rfb-snfi \
|
|
mt7981_routerich_ax3000 \
|
|
mt7981_qihoo_360t7 \
|
|
mt7981_xiaomi_mi-router-ax3000t \
|
|
mt7981_xiaomi_mi-router-wr30u \
|
|
mt7986_bananapi_bpi-r3-emmc \
|
|
mt7986_bananapi_bpi-r3-sdmmc \
|
|
mt7986_bananapi_bpi-r3-snand \
|
|
mt7986_bananapi_bpi-r3-nor \
|
|
mt7986_bananapi_bpi-r3-mini-emmc \
|
|
mt7986_bananapi_bpi-r3-mini-snand \
|
|
mt7986_glinet_gl-mt6000 \
|
|
mt7986_jdcloud_re-cp-03 \
|
|
mt7986_mercusys_mr90x-v1 \
|
|
mt7986_netcore_n60 \
|
|
mt7986_tplink_tl-xdr4288 \
|
|
mt7986_tplink_tl-xdr6086 \
|
|
mt7986_tplink_tl-xdr6088 \
|
|
mt7986_tplink_tl-xtr8488 \
|
|
mt7986_xiaomi_redmi-router-ax6000 \
|
|
mt7986_zyxel_ex5601-t0 \
|
|
mt7986_rfb \
|
|
mt7988_arcadyan_mozart \
|
|
mt7988_bananapi_bpi-r4-emmc \
|
|
mt7988_bananapi_bpi-r4-sdmmc \
|
|
mt7988_bananapi_bpi-r4-snand \
|
|
mt7988_bananapi_bpi-r4-poe-emmc \
|
|
mt7988_bananapi_bpi-r4-poe-sdmmc \
|
|
mt7988_bananapi_bpi-r4-poe-snand \
|
|
mt7988_rfb-spim-nand \
|
|
mt7988_rfb-snand \
|
|
mt7988_rfb-nor \
|
|
mt7988_rfb-emmc \
|
|
mt7988_rfb-sd
|
|
|
|
UBOOT_CUSTOMIZE_CONFIG := \
|
|
--disable TOOLS_KWBIMAGE \
|
|
--disable TOOLS_LIBCRYPTO \
|
|
--disable TOOLS_MKEFICAPSULE \
|
|
--enable SERIAL_RX_BUFFER
|
|
|
|
ifdef CONFIG_TARGET_mediatek
|
|
UBOOT_MAKE_FLAGS += $(UBOOT_IMAGE:.fip=.bin)
|
|
endif
|
|
|
|
define Build/fip-image
|
|
$(if $(FIP_COMPRESS),\
|
|
xz -f -e -k -9 -C crc32 $(STAGING_DIR_IMAGE)/$(if $(BL2_SOC),$(BL2_SOC),$(BUILD_SUBTARGET))-$(BL2_BOOTDEV)-$(if $(BL2_DDRTYPE),$(BL2_DDRTYPE)-)$(if $(BL2_DDRBLOB),$(BL2_DDRBLOB)ddr-)bl31.bin ;\
|
|
xz -f -e -k -9 -C crc32 $(PKG_BUILD_DIR)/u-boot.bin \
|
|
)
|
|
$(STAGING_DIR_HOST)/bin/fiptool create \
|
|
--soc-fw $(STAGING_DIR_IMAGE)/$(if $(BL2_SOC),$(BL2_SOC),$(BUILD_SUBTARGET))-$(BL2_BOOTDEV)-$(if $(BL2_DDRTYPE),$(BL2_DDRTYPE)-)$(if $(BL2_DDRBLOB),$(BL2_DDRBLOB)ddr-)bl31.bin$(if $(FIP_COMPRESS),.xz) \
|
|
--nt-fw $(PKG_BUILD_DIR)/u-boot.bin$(if $(FIP_COMPRESS),.xz) \
|
|
$(PKG_BUILD_DIR)/u-boot.fip
|
|
endef
|
|
|
|
ifdef CONFIG_TARGET_ramips_mt7621
|
|
define Build/Prepare
|
|
$(call Build/Prepare/Default)
|
|
ifdef CONFIG_DEBUG
|
|
$(CP) $(DL_DIR)/mt7621_stage_sram.bin $(PKG_BUILD_DIR)/
|
|
else
|
|
$(CP) $(DL_DIR)/mt7621_stage_sram_noprint.bin $(PKG_BUILD_DIR)/mt7621_stage_sram.bin
|
|
endif
|
|
endef
|
|
endif
|
|
|
|
define Build/Configure
|
|
$(call Build/Configure/U-Boot)
|
|
sed -i 's/CONFIG_TOOLS_LIBCRYPTO=y/# CONFIG_TOOLS_LIBCRYPTO is not set/' $(PKG_BUILD_DIR)/.config
|
|
endef
|
|
|
|
define Build/Compile
|
|
$(call Build/Compile/U-Boot)
|
|
ifeq ($(UBOOT_IMAGE),u-boot.fip)
|
|
$(call Build/fip-image)
|
|
endif
|
|
endef
|
|
|
|
# don't stage files to bindir, let target/linux/mediatek/image/*.mk do that
|
|
ifdef CONFIG_TARGET_mediatek
|
|
define Package/u-boot/install
|
|
endef
|
|
endif
|
|
|
|
define Build/InstallDev
|
|
$(INSTALL_DIR) $(STAGING_DIR_IMAGE)
|
|
$(INSTALL_DATA) $(PKG_BUILD_DIR)/$(UBOOT_IMAGE) $(STAGING_DIR_IMAGE)/$(BUILD_VARIANT)-$(UBOOT_IMAGE)
|
|
endef
|
|
|
|
$(eval $(call BuildPackage/U-Boot))
|