Nanako/xx_vv_immortalwrt
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
xx_vv_immortalwrt/target/linux/mediatek/image/filogic.mk
Mikhail Zhilkin d8002cb627 mediatek: add support for netis NX31 
This PR adds support for netis NX31 router.

Specification
-------------
- SoC       : MediaTek MT7981BA dual-core ARM Cortex-A53 1.3 GHz
- RAM       : 256 MiB DDR3
- Flash     : SPI-NAND 128 MiB (ESMT)
- WLAN      : MediaTek MT7976CN dual-band WiFi 6
  - 2.4 GHz : b/g/n/ax, MIMO 2x2
  - 5 GHz   : a/n/ac/ax, MIMO 2x2
- Ethernet  : 10/100/1000 Mbps x3 (LAN, MediaTek MT7531AE)
              10/100/1000 Mbps x1 (WAN, SoC internal phy)
- USB       : No
- Buttons   : Mesh, Reset
- LEDs      : 1x Power (blue), unmanaged
              1x Status (blue), gpio-controlled
              1x WiFi 2.4 GHz (blue), gpio-controlled
              1x WiFi 5 GHz (blue), gpio-controlled
              3x LAN activity (blue), switch-controlled
              1x WAN activity (blue), gpio-controlled
- Power     : 12 VDC, 1 A

Installation
------------
1. Connect to the router using ssh (user: admin, pass: web interface
   password)
2. Make mtd backup:
   cat /dev/mtd0 | gzip -1 -c > /tmp/mtd0_spi0.0.bin.gz
   cat /dev/mtd1 | gzip -1 -c > /tmp/mtd1_BL2.bin.gz
   cat /dev/mtd2 | gzip -1 -c > /tmp/mtd2_u-boot-env.bin.gz
   cat /dev/mtd3 | gzip -1 -c > /tmp/mtd3_Factory.bin.gz
   cat /dev/mtd4 | gzip -1 -c > /tmp/mtd4_FIP.bin.gz
   cat /dev/mtd5 | gzip -1 -c > /tmp/mtd5_ubi.bin.gz
3. Download mtd backup from the /tmp dir of the router to your PC using
   scp protocol
4. Upload OpenWrt 'bl31-uboot.fip', 'preloader.bin' images to the /tmp
   dir of the router using scp protocol
5. Write FIP and BL2 (replace bootloader):
   mtd write /tmp/openwrt-mediatek-filogic-netis_nx31-bl31-uboot.fip FIP
   mtd write /tmp/openwrt-mediatek-filogic-netis_nx31-preloader.bin BL2
6. Place OpenWrt
   'openwrt-mediatek-filogic-netis_nx31-initramfs-recovery.itb' image on
   the tftp server (IP: 192.168.1.254)
7. Erase 'ubi' partition and reboot the router:
   mtd erase ubi
   reboot
8. U-Boot automatically boot OpenWrt recovery image from tftp server to
   the RAM
9. Upload OpenWrt 'sysupgrade.itb' image to the /tmp dir of the router
   (IP: 192.168.1.1) using scp protocol
10. Connect to the router using ssh and run:
    sysupgrade -n openwrt-mediatek-filogic-netis_nx31-squashfs-sysupgrade.itb

Return to stock
---------------
1. Unpack stock BL2 and FIP partitions backup
2. Upload stock BL2 and FIP partitions backup to the /tmp dir of the
   router using scp protocol
3. Connect to the router using ssh and run:
   apk update && apk add kmod-mtd-rw
   insmod mtd-rw i_want_a_brick=1
   mtd unlock BL2
   mtd unlock FIP
4. Restore backup:
   mtd write /tmp/mtd4_FIP.bin FIP
   mtd write /tmp/mtd1_BL2.bin BL2
5. Erase ubi and reboot:
   mtd erase ubi
   reboot
6. Power off the router
7. Press Reset button and power on the router. Release the button after
   ~10 sec
8. Navigate to U-Boot recovery web server (http://192.168.1.1/) and
   upload the OEM firmware

Recovery
--------
1. Place OpenWrt
   'openwrt-mediatek-filogic-netis_nx31-initramfs-recovery.itb' image on
   the tftp server (IP: 192.168.1.254)
2. Press “Reset” button and power on the router. After ~10 sec release
   the button.
3. Use OpenWrt initramfs system for recovery

MAC addresses
-------------
+---------+-------------------+-----------+
|         | MAC               | Algorithm |
+---------+-------------------+-----------+
| LAN     | dc:xx:xx:d1:xx:18 | label     |
| WAN     | dc:xx:xx:d1:xx:1a | label+2   |
| WLAN 2g | de:xx:xx:11:xx:19 |           |
| WLAN 5g | de:xx:xx:71:xx:19 |           |
+---------+-------------------+-----------+
The LAN MAC was found in 'Factory', 0x1fef20
The WAN MAC was found in 'Factory', 0x1fef26
The WLAN 2g/5g MAC prototype was found in 'Factory', 0x4

Signed-off-by: Mikhail Zhilkin <csharper2005@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/18324
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2025-04-06 20:14:18 +02:00

1920 lines
71 KiB
Makefile
Raw Blame History

DTS_DIR := $(DTS_DIR)/mediatek
define Image/Prepare
# For UBI we want only one extra block
rm -f $(KDIR)/ubi_mark
echo -ne '\xde\xad\xc0\xde' > $(KDIR)/ubi_mark
endef
define Build/mt7981-bl2
cat $(STAGING_DIR_IMAGE)/mt7981-$1-bl2.img >> $@
endef
define Build/mt7981-bl31-uboot
cat $(STAGING_DIR_IMAGE)/mt7981_$1-u-boot.fip >> $@
endef
define Build/mt7986-bl2
cat $(STAGING_DIR_IMAGE)/mt7986-$1-bl2.img >> $@
endef
define Build/mt7986-bl31-uboot
cat $(STAGING_DIR_IMAGE)/mt7986_$1-u-boot.fip >> $@
endef
define Build/mt7988-bl2
cat $(STAGING_DIR_IMAGE)/mt7988-$1-bl2.img >> $@
endef
define Build/mt7988-bl31-uboot
cat $(STAGING_DIR_IMAGE)/mt7988_$1-u-boot.fip >> $@
endef
define Build/mt798x-gpt
cp $@ $@.tmp 2>/dev/null || true
ptgen -g -o $@.tmp -a 1 -l 1024 \
$(if $(findstring sdmmc,$1), \
-H \
-t 0x83 -N bl2 -r -p 4079k@17k \
) \
-t 0x83 -N ubootenv -r -p 512k@4M \
-t 0x83 -N factory -r -p 2M@4608k \
-t 0xef -N fip -r -p 4M@6656k \
-N recovery -r -p 32M@12M \
$(if $(findstring sdmmc,$1), \
-N install -r -p 20M@44M \
-t 0x2e -N production -p $(CONFIG_TARGET_ROOTFS_PARTSIZE)M@64M \
) \
$(if $(findstring emmc,$1), \
-t 0x2e -N production -p $(CONFIG_TARGET_ROOTFS_PARTSIZE)M@64M \
)
cat $@.tmp >> $@
rm $@.tmp
endef
define Build/append-openwrt-one-eeprom
dd if=$(STAGING_DIR_IMAGE)/mt7981_eeprom_mt7976_dbdc.bin >> $@
endef
define Build/zyxel-nwa-fit-filogic
$(TOPDIR)/scripts/mkits-zyxel-fit-filogic.sh \
$@.its $@ "80 e1 ff ff ff ff ff ff ff ff"
PATH=$(LINUX_DIR)/scripts/dtc:$(PATH) mkimage -f $@.its $@.new
@mv $@.new $@
endef
define Build/cetron-header
$(eval magic=$(word 1,$(1)))
$(eval model=$(word 2,$(1)))
( \
dd if=/dev/zero bs=856 count=1 2>/dev/null; \
printf "$(model)," | dd bs=128 count=1 conv=sync 2>/dev/null; \
md5sum $@ | cut -f1 -d" " | dd bs=32 count=1 2>/dev/null; \
printf "$(magic)" | dd bs=4 count=1 conv=sync 2>/dev/null; \
cat $@; \
) > $@.tmp
fw_crc=$$(gzip -c $@.tmp | tail -c 8 | od -An -N4 -tx4 --endian little | tr -d ' \n'); \
printf "$$(echo $$fw_crc | sed 's/../\\x&/g')" | cat - $@.tmp > $@
rm $@.tmp
endef
define Device/abt_asr3000
DEVICE_VENDOR := ABT
DEVICE_MODEL := ASR3000
DEVICE_DTS := mt7981b-abt-asr3000
DEVICE_DTS_DIR := ../dts
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware
UBINIZE_OPTS := -E 5
BLOCKSIZE := 128k
PAGESIZE := 2048
KERNEL_IN_UBI := 1
UBOOTENV_IN_UBI := 1
IMAGES := sysupgrade.itb
KERNEL_INITRAMFS_SUFFIX := -recovery.itb
KERNEL := kernel-bin | gzip
KERNEL_INITRAMFS := kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
IMAGE/sysupgrade.itb := append-kernel | \
fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-static-with-rootfs | append-metadata
ARTIFACTS := preloader.bin bl31-uboot.fip
ARTIFACT/preloader.bin := mt7981-bl2 spim-nand-ddr3
ARTIFACT/bl31-uboot.fip := mt7981-bl31-uboot abt_asr3000
endef
TARGET_DEVICES += abt_asr3000
define Device/acelink_ew-7886cax
DEVICE_VENDOR := Acelink
DEVICE_MODEL := EW-7886CAX
DEVICE_DTS := mt7986a-acelink-ew-7886cax
DEVICE_DTS_DIR := ../dts
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7986-firmware mt7986-wo-firmware
UBINIZE_OPTS := -E 5
BLOCKSIZE := 128k
PAGESIZE := 2048
IMAGE_SIZE := 65536k
KERNEL_IN_UBI := 1
IMAGES += factory.bin
IMAGE/factory.bin := append-ubi | check-size $$$$(IMAGE_SIZE)
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
endef
TARGET_DEVICES += acelink_ew-7886cax
define Device/acer_predator-w6
DEVICE_VENDOR := Acer
DEVICE_MODEL := Predator Connect W6
DEVICE_DTS := mt7986a-acer-predator-w6
DEVICE_DTS_DIR := ../dts
DEVICE_DTS_LOADADDR := 0x47000000
DEVICE_PACKAGES := kmod-usb3 kmod-mt7915e kmod-mt7916-firmware kmod-mt7986-firmware mt7986-wo-firmware e2fsprogs f2fsck mkf2fs
IMAGES := sysupgrade.bin
KERNEL := kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
KERNEL_INITRAMFS := kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
endef
TARGET_DEVICES += acer_predator-w6
define Device/acer_predator-w6d
DEVICE_VENDOR := Acer
DEVICE_MODEL := Predator Connect W6d
DEVICE_DTS := mt7986a-acer-predator-w6d
DEVICE_DTS_DIR := ../dts
DEVICE_DTS_LOADADDR := 0x47000000
DEVICE_PACKAGES := kmod-usb3 kmod-mt7915e kmod-mt7916-firmware kmod-mt7986-firmware mt7986-wo-firmware e2fsprogs f2fsck mkf2fs
IMAGES := sysupgrade.bin
KERNEL := kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
KERNEL_INITRAMFS := kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
endef
TARGET_DEVICES += acer_predator-w6d
define Device/acer_vero-w6m
DEVICE_VENDOR := Acer
DEVICE_MODEL := Connect Vero W6m
DEVICE_DTS := mt7986a-acer-vero-w6m
DEVICE_DTS_DIR := ../dts
DEVICE_DTS_LOADADDR := 0x47000000
DEVICE_PACKAGES := kmod-leds-ktd202x kmod-mt7915e kmod-mt7916-firmware kmod-mt7986-firmware mt7986-wo-firmware e2fsprogs f2fsck mkf2fs
IMAGES := sysupgrade.bin
KERNEL := kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
KERNEL_INITRAMFS := kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
endef
TARGET_DEVICES += acer_vero-w6m
define Device/adtran_smartrg
DEVICE_VENDOR := Adtran
DEVICE_DTS_DIR := ../dts
DEVICE_PACKAGES := e2fsprogs f2fsck mkf2fs kmod-hwmon-pwmfan
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
endef
define Device/smartrg_sdg-8612
$(call Device/adtran_smartrg)
DEVICE_MODEL := SDG-8612
DEVICE_DTS := mt7986a-smartrg-SDG-8612
DEVICE_PACKAGES += kmod-mt7915e kmod-mt7986-firmware mt7986-wo-firmware
endef
TARGET_DEVICES += smartrg_sdg-8612
define Device/smartrg_sdg-8614
$(call Device/adtran_smartrg)
DEVICE_MODEL := SDG-8614
DEVICE_DTS := mt7986a-smartrg-SDG-8614
DEVICE_PACKAGES += kmod-mt7915e kmod-mt7986-firmware mt7986-wo-firmware
endef
TARGET_DEVICES += smartrg_sdg-8614
define Device/smartrg_sdg-8622
$(call Device/adtran_smartrg)
DEVICE_MODEL := SDG-8622
DEVICE_DTS := mt7986a-smartrg-SDG-8622
DEVICE_PACKAGES += kmod-mt7915e kmod-mt7915-firmware kmod-mt7986-firmware mt7986-wo-firmware
endef
TARGET_DEVICES += smartrg_sdg-8622
define Device/smartrg_sdg-8632
$(call Device/adtran_smartrg)
DEVICE_MODEL := SDG-8632
DEVICE_DTS := mt7986a-smartrg-SDG-8632
DEVICE_PACKAGES += kmod-mt7915e kmod-mt7915-firmware kmod-mt7986-firmware mt7986-wo-firmware
endef
TARGET_DEVICES += smartrg_sdg-8632
define Device/smartrg_sdg-8733
$(call Device/adtran_smartrg)
DEVICE_MODEL := SDG-8733
DEVICE_DTS := mt7988a-smartrg-SDG-8733
DEVICE_PACKAGES += kmod-mt7996-firmware kmod-phy-aquantia kmod-usb3 mt7988-wo-firmware
endef
TARGET_DEVICES += smartrg_sdg-8733
define Device/smartrg_sdg-8733a
$(call Device/adtran_smartrg)
DEVICE_MODEL := SDG-8733A
DEVICE_DTS := mt7988d-smartrg-SDG-8733A
DEVICE_PACKAGES += mt7988-2p5g-phy-firmware kmod-mt7996-233-firmware kmod-phy-aquantia mt7988-wo-firmware
endef
TARGET_DEVICES += smartrg_sdg-8733a
define Device/smartrg_sdg-8734
$(call Device/adtran_smartrg)
DEVICE_MODEL := SDG-8734
DEVICE_DTS := mt7988a-smartrg-SDG-8734
DEVICE_PACKAGES += kmod-mt7996-firmware kmod-phy-aquantia kmod-sfp kmod-usb3 mt7988-wo-firmware
endef
TARGET_DEVICES += smartrg_sdg-8734
define Device/arcadyan_mozart
DEVICE_VENDOR := Arcadyan
DEVICE_MODEL := Mozart
DEVICE_DTS := mt7988a-arcadyan-mozart
DEVICE_DTS_DIR := ../dts
DEVICE_DTC_FLAGS := --pad 4096
DEVICE_DTS_LOADADDR := 0x45f00000
DEVICE_PACKAGES := kmod-hwmon-pwmfan e2fsprogs f2fsck mkf2fs kmod-mt7996-firmware
KERNEL_LOADADDR := 0x46000000
KERNEL := kernel-bin | gzip
KERNEL_INITRAMFS := kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
KERNEL_INITRAMFS_SUFFIX := .itb
IMAGE_SIZE := $$(shell expr 64 + $$(CONFIG_TARGET_ROOTFS_PARTSIZE))m
IMAGES := sysupgrade.itb
IMAGE/sysupgrade.itb := append-kernel | fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-with-rootfs | pad-rootfs | append-metadata
ARTIFACTS := emmc-preloader.bin emmc-bl31-uboot.fip emmc-gpt.bin
ARTIFACT/emmc-gpt.bin := mt798x-gpt emmc
ARTIFACT/emmc-preloader.bin := mt7988-bl2 emmc-comb
ARTIFACT/emmc-bl31-uboot.fip := mt7988-bl31-uboot arcadyan_mozart
SUPPORTED_DEVICES += arcadyan,mozart
endef
TARGET_DEVICES += arcadyan_mozart
define Device/asus_rt-ax59u
DEVICE_VENDOR := ASUS
DEVICE_MODEL := RT-AX59U
DEVICE_DTS := mt7986a-asus-rt-ax59u
DEVICE_DTS_DIR := ../dts
DEVICE_PACKAGES := kmod-usb3 kmod-mt7915e kmod-mt7986-firmware mt7986-wo-firmware
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
endef
TARGET_DEVICES += asus_rt-ax59u
define Device/asus_tuf-ax4200
DEVICE_VENDOR := ASUS
DEVICE_MODEL := TUF-AX4200
DEVICE_DTS := mt7986a-asus-tuf-ax4200
DEVICE_DTS_DIR := ../dts
DEVICE_DTS_LOADADDR := 0x47000000
DEVICE_PACKAGES := kmod-usb3 kmod-mt7915e kmod-mt7986-firmware mt7986-wo-firmware
IMAGES := sysupgrade.bin
KERNEL := kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
KERNEL_INITRAMFS := kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
endef
TARGET_DEVICES += asus_tuf-ax4200
define Device/asus_tuf-ax6000
DEVICE_VENDOR := ASUS
DEVICE_MODEL := TUF-AX6000
DEVICE_DTS := mt7986a-asus-tuf-ax6000
DEVICE_DTS_DIR := ../dts
DEVICE_DTS_LOADADDR := 0x47000000
DEVICE_PACKAGES := kmod-usb3 kmod-mt7915e kmod-mt7986-firmware mt7986-wo-firmware
IMAGES := sysupgrade.bin
KERNEL := kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
KERNEL_INITRAMFS := kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
endef
TARGET_DEVICES += asus_tuf-ax6000
define Device/asus_zenwifi-bt8
DEVICE_VENDOR := ASUS
DEVICE_MODEL := ZenWiFi BT8
DEVICE_DTS := mt7988d-asus-zenwifi-bt8
DEVICE_DTS_DIR := ../dts
DEVICE_PACKAGES := kmod-usb3 mt7988-2p5g-phy-firmware kmod-mt7996-firmware mt7988-wo-firmware
KERNEL := kernel-bin | gzip | \
fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
KERNEL_INITRAMFS := kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
KERNEL_LOADADDR := 0x48080000
IMAGES := sysupgrade.bin
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
ARTIFACTS := factory.bin
ARTIFACT/factory.bin := append-image initramfs-kernel.bin | uImage lzma
endif
endef
TARGET_DEVICES += asus_zenwifi-bt8
define Device/asus_zenwifi-bt8-ubootmod
DEVICE_VENDOR := ASUS
DEVICE_MODEL := ZenWiFi BT8
DEVICE_VARIANT := U-Boot mod
DEVICE_DTS := mt7988d-asus-zenwifi-bt8-ubootmod
DEVICE_DTS_DIR := ../dts
DEVICE_DTS_LOADADDR := 0x45f00000
DEVICE_PACKAGES := kmod-usb3 mt7988-2p5g-phy-firmware kmod-mt7996-firmware mt7988-wo-firmware
ARTIFACTS := preloader.bin bl31-uboot.fip
ARTIFACT/preloader.bin := mt7988-bl2 spim-nand-ubi-ddr4
ARTIFACT/bl31-uboot.fip := mt7988-bl31-uboot asus_zenwifi-bt8
KERNEL := kernel-bin | gzip
KERNEL_INITRAMFS := kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
KERNEL_INITRAMFS_SUFFIX := -recovery.itb
KERNEL_LOADADDR := 0x46000000
KERNEL_IN_UBI := 1
UBOOTENV_IN_UBI := 1
IMAGES := sysupgrade.itb
IMAGE/sysupgrade.itb := append-kernel | fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-with-rootfs | pad-rootfs | append-metadata
endef
TARGET_DEVICES += asus_zenwifi-bt8-ubootmod
define Device/bananapi_bpi-r3
DEVICE_VENDOR := Bananapi
DEVICE_MODEL := BPi-R3
DEVICE_DTS := mt7986a-bananapi-bpi-r3
DEVICE_DTS_CONFIG := config-mt7986a-bananapi-bpi-r3
DEVICE_DTS_OVERLAY:= mt7986a-bananapi-bpi-r3-emmc mt7986a-bananapi-bpi-r3-nand \
mt7986a-bananapi-bpi-r3-nor mt7986a-bananapi-bpi-r3-sd \
mt7986a-bananapi-bpi-r3-respeaker-2mics
DEVICE_DTS_DIR := $(DTS_DIR)/
DEVICE_DTS_LOADADDR := 0x43f00000
DEVICE_PACKAGES := kmod-hwmon-pwmfan kmod-i2c-gpio kmod-mt7915e kmod-mt7986-firmware kmod-sfp kmod-usb3 \
e2fsprogs f2fsck mkf2fs mt7986-wo-firmware
IMAGES := sysupgrade.itb
KERNEL_LOADADDR := 0x44000000
KERNEL_INITRAMFS_SUFFIX := -recovery.itb
ARTIFACTS := \
emmc-preloader.bin emmc-bl31-uboot.fip \
nor-preloader.bin nor-bl31-uboot.fip \
sdcard.img.gz \
snand-preloader.bin snand-bl31-uboot.fip
ARTIFACT/emmc-preloader.bin := mt7986-bl2 emmc-ddr4
ARTIFACT/emmc-bl31-uboot.fip := mt7986-bl31-uboot bananapi_bpi-r3-emmc
ARTIFACT/nor-preloader.bin := mt7986-bl2 nor-ddr4
ARTIFACT/nor-bl31-uboot.fip := mt7986-bl31-uboot bananapi_bpi-r3-nor
ARTIFACT/snand-preloader.bin := mt7986-bl2 spim-nand-ubi-ddr4
ARTIFACT/snand-bl31-uboot.fip := mt7986-bl31-uboot bananapi_bpi-r3-snand
ARTIFACT/sdcard.img.gz := mt798x-gpt sdmmc |\
pad-to 17k | mt7986-bl2 sdmmc-ddr4 |\
pad-to 6656k | mt7986-bl31-uboot bananapi_bpi-r3-sdmmc |\
$(if $(CONFIG_TARGET_ROOTFS_INITRAMFS),\
pad-to 12M | append-image-stage initramfs-recovery.itb | check-size 44m |\
) \
pad-to 44M | mt7986-bl2 spim-nand-ubi-ddr4 |\
pad-to 45M | mt7986-bl31-uboot bananapi_bpi-r3-snand |\
pad-to 49M | mt7986-bl2 nor-ddr4 |\
pad-to 50M | mt7986-bl31-uboot bananapi_bpi-r3-nor |\
pad-to 51M | mt7986-bl2 emmc-ddr4 |\
pad-to 52M | mt7986-bl31-uboot bananapi_bpi-r3-emmc |\
pad-to 56M | mt798x-gpt emmc |\
$(if $(CONFIG_TARGET_ROOTFS_SQUASHFS),\
pad-to 64M | append-image squashfs-sysupgrade.itb | check-size |\
) \
gzip
ifeq ($(DUMP),)
IMAGE_SIZE := $$(shell expr 64 + $$(CONFIG_TARGET_ROOTFS_PARTSIZE))m
endif
KERNEL := kernel-bin | gzip
KERNEL_INITRAMFS := kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
IMAGE/sysupgrade.itb := append-kernel | fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-static-with-rootfs | pad-rootfs | append-metadata
DEVICE_DTC_FLAGS := --pad 4096
DEVICE_COMPAT_VERSION := 1.3
DEVICE_COMPAT_MESSAGE := First sfp port renamed from eth1 to sfp1
endef
TARGET_DEVICES += bananapi_bpi-r3
define Device/bananapi_bpi-r3-mini
DEVICE_VENDOR := Bananapi
DEVICE_MODEL := BPi-R3 Mini
DEVICE_DTS := mt7986a-bananapi-bpi-r3-mini
DEVICE_DTS_CONFIG := config-mt7986a-bananapi-bpi-r3-mini
DEVICE_DTS_DIR := ../dts
DEVICE_DTS_LOADADDR := 0x43f00000
DEVICE_PACKAGES := kmod-eeprom-at24 kmod-hwmon-pwmfan kmod-mt7915e kmod-mt7986-firmware \
kmod-phy-airoha-en8811h kmod-usb3 e2fsprogs f2fsck mkf2fs mt7986-wo-firmware
KERNEL_LOADADDR := 0x44000000
KERNEL := kernel-bin | gzip
KERNEL_INITRAMFS := kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
KERNEL_INITRAMFS_SUFFIX := -recovery.itb
BLOCKSIZE := 128k
PAGESIZE := 2048
KERNEL_IN_UBI := 1
UBOOTENV_IN_UBI := 1
IMAGES := snand-factory.bin sysupgrade.itb
ifeq ($(DUMP),)
IMAGE_SIZE := $$(shell expr 64 + $$(CONFIG_TARGET_ROOTFS_PARTSIZE))m
endif
IMAGE/sysupgrade.itb := append-kernel | \
fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-static-with-rootfs | \
pad-rootfs | append-metadata
ARTIFACTS := \
emmc-gpt.bin emmc-preloader.bin emmc-bl31-uboot.fip \
snand-factory.bin snand-preloader.bin snand-bl31-uboot.fip
ARTIFACT/emmc-gpt.bin := mt798x-gpt emmc
ARTIFACT/emmc-preloader.bin := mt7986-bl2 emmc-ddr4
ARTIFACT/emmc-bl31-uboot.fip := mt7986-bl31-uboot bananapi_bpi-r3-mini-emmc
ARTIFACT/snand-factory.bin := mt7986-bl2 spim-nand-ubi-ddr4 | pad-to 256k | \
mt7986-bl2 spim-nand-ubi-ddr4 | pad-to 512k | \
mt7986-bl2 spim-nand-ubi-ddr4 | pad-to 768k | \
mt7986-bl2 spim-nand-ubi-ddr4 | pad-to 2048k | \
ubinize-image fit squashfs-sysupgrade.itb
ARTIFACT/snand-preloader.bin := mt7986-bl2 spim-nand-ubi-ddr4
ARTIFACT/snand-bl31-uboot.fip := mt7986-bl31-uboot bananapi_bpi-r3-mini-snand
UBINIZE_PARTS := fip=:$(STAGING_DIR_IMAGE)/mt7986_bananapi_bpi-r3-mini-snand-u-boot.fip
ifneq ($(CONFIG_PACKAGE_airoha-en8811h-firmware),)
UBINIZE_PARTS += en8811h-fw=:$(STAGING_DIR_IMAGE)/EthMD32.bin
endif
endef
TARGET_DEVICES += bananapi_bpi-r3-mini
define Device/bananapi_bpi-r4-common
DEVICE_VENDOR := Bananapi
DEVICE_DTS_DIR := $(DTS_DIR)/
DEVICE_DTS_LOADADDR := 0x45f00000
DEVICE_DTS_OVERLAY:= mt7988a-bananapi-bpi-r4-emmc mt7988a-bananapi-bpi-r4-rtc mt7988a-bananapi-bpi-r4-sd mt7988a-bananapi-bpi-r4-wifi-mt7996a
DEVICE_DTC_FLAGS := --pad 4096
DEVICE_PACKAGES := kmod-hwmon-pwmfan kmod-i2c-mux-pca954x kmod-eeprom-at24 kmod-mt7996-firmware kmod-mt7996-233-firmware \
kmod-rtc-pcf8563 kmod-sfp kmod-usb3 e2fsprogs f2fsck mkf2fs mt7988-wo-firmware
DEVICE_COMPAT_VERSION := 1.1
DEVICE_COMPAT_MESSAGE := The non-switch ports were renamed to match the board/case labels
IMAGES := sysupgrade.itb
KERNEL_LOADADDR := 0x46000000
KERNEL_INITRAMFS_SUFFIX := -recovery.itb
ARTIFACTS := \
emmc-gpt.bin emmc-preloader.bin emmc-bl31-uboot.fip \
sdcard.img.gz \
snand-preloader.bin snand-bl31-uboot.fip
ARTIFACT/emmc-gpt.bin := mt798x-gpt emmc
ARTIFACT/emmc-preloader.bin := mt7988-bl2 emmc-comb
ARTIFACT/emmc-bl31-uboot.fip := mt7988-bl31-uboot $$(DEVICE_NAME)-emmc
ARTIFACT/snand-preloader.bin := mt7988-bl2 spim-nand-ubi-comb
ARTIFACT/snand-bl31-uboot.fip := mt7988-bl31-uboot $$(DEVICE_NAME)-snand
ARTIFACT/sdcard.img.gz := mt798x-gpt sdmmc |\
pad-to 17k | mt7988-bl2 sdmmc-comb |\
pad-to 6656k | mt7988-bl31-uboot $$(DEVICE_NAME)-sdmmc |\
$(if $(CONFIG_TARGET_ROOTFS_INITRAMFS),\
pad-to 12M | append-image-stage initramfs-recovery.itb | check-size 44m |\
) \
pad-to 44M | mt7988-bl2 spim-nand-ubi-comb |\
pad-to 45M | mt7988-bl31-uboot $$(DEVICE_NAME)-snand |\
pad-to 51M | mt7988-bl2 emmc-comb |\
pad-to 52M | mt7988-bl31-uboot $$(DEVICE_NAME)-emmc |\
pad-to 56M | mt798x-gpt emmc |\
$(if $(CONFIG_TARGET_ROOTFS_SQUASHFS),\
pad-to 64M | append-image squashfs-sysupgrade.itb | check-size |\
) \
gzip
IMAGE_SIZE := $$(shell expr 64 + $$(CONFIG_TARGET_ROOTFS_PARTSIZE))m
KERNEL := kernel-bin | gzip
KERNEL_INITRAMFS := kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
IMAGE/sysupgrade.itb := append-kernel | fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-with-rootfs | pad-rootfs | append-metadata
endef
define Device/bananapi_bpi-r4
DEVICE_MODEL := BPi-R4
DEVICE_DTS := mt7988a-bananapi-bpi-r4
DEVICE_DTS_CONFIG := config-mt7988a-bananapi-bpi-r4
$(call Device/bananapi_bpi-r4-common)
endef
TARGET_DEVICES += bananapi_bpi-r4
define Device/bananapi_bpi-r4-poe
DEVICE_MODEL := BPi-R4 2.5GE
DEVICE_DTS := mt7988a-bananapi-bpi-r4-poe
DEVICE_DTS_CONFIG := config-mt7988a-bananapi-bpi-r4-poe
$(call Device/bananapi_bpi-r4-common)
DEVICE_PACKAGES += mt7988-2p5g-phy-firmware
endef
TARGET_DEVICES += bananapi_bpi-r4-poe
define Device/cetron_ct3003
DEVICE_VENDOR := Cetron
DEVICE_MODEL := CT3003
DEVICE_DTS := mt7981b-cetron-ct3003
DEVICE_DTS_DIR := ../dts
SUPPORTED_DEVICES += mediatek,mt7981-spim-snand-rfb
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware
UBINIZE_OPTS := -E 5
BLOCKSIZE := 128k
PAGESIZE := 2048
KERNEL_IN_UBI := 1
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
IMAGES += factory.bin
IMAGE/factory.bin := $$(IMAGE/sysupgrade.bin) | cetron-header rd30 CT3003
endef
TARGET_DEVICES += cetron_ct3003
define Device/cmcc_a10-stock
DEVICE_VENDOR := CMCC
DEVICE_MODEL := A10 (stock layout)
DEVICE_ALT0_VENDOR := SuperElectron
DEVICE_ALT0_MODEL := ZN-M5 (stock layout)
DEVICE_ALT1_VENDOR := SuperElectron
DEVICE_ALT1_MODEL := ZN-M8 (stock layout)
DEVICE_DTS := mt7981b-cmcc-a10-stock
DEVICE_DTS_DIR := ../dts
SUPPORTED_DEVICES += mediatek,mt7981-spim-snand-rfb
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware
UBINIZE_OPTS := -E 5
BLOCKSIZE := 128k
PAGESIZE := 2048
IMAGE_SIZE := 65536k
KERNEL_IN_UBI := 1
IMAGES += factory.bin
IMAGE/factory.bin := append-ubi | check-size $$$$(IMAGE_SIZE)
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
KERNEL = kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
KERNEL_INITRAMFS = kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd
endef
TARGET_DEVICES += cmcc_a10-stock
define Device/cmcc_a10-ubootmod
DEVICE_VENDOR := CMCC
DEVICE_MODEL := A10 (OpenWrt U-Boot layout)
DEVICE_ALT0_VENDOR := SuperElectron
DEVICE_ALT0_MODEL := ZN-M5 (OpenWrt U-Boot layout)
DEVICE_ALT1_VENDOR := SuperElectron
DEVICE_ALT1_MODEL := ZN-M8 (OpenWrt U-Boot layout)
DEVICE_DTS := mt7981b-cmcc-a10-ubootmod
DEVICE_DTS_DIR := ../dts
SUPPORTED_DEVICES += cmcc,a10
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware
UBINIZE_OPTS := -E 5
BLOCKSIZE := 128k
PAGESIZE := 2048
KERNEL_IN_UBI := 1
UBOOTENV_IN_UBI := 1
IMAGES := sysupgrade.itb
KERNEL_INITRAMFS_SUFFIX := -recovery.itb
KERNEL := kernel-bin | gzip
KERNEL_INITRAMFS := kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
IMAGE/sysupgrade.itb := append-kernel | \
fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-static-with-rootfs | append-metadata
ARTIFACTS := preloader.bin bl31-uboot.fip
ARTIFACT/preloader.bin := mt7981-bl2 spim-nand-ddr3
ARTIFACT/bl31-uboot.fip := mt7981-bl31-uboot cmcc_a10
endef
TARGET_DEVICES += cmcc_a10-ubootmod
define Device/cmcc_rax3000m
DEVICE_VENDOR := CMCC
DEVICE_MODEL := RAX3000M
DEVICE_DTS := mt7981b-cmcc-rax3000m
DEVICE_DTS_OVERLAY := mt7981b-cmcc-rax3000m-emmc mt7981b-cmcc-rax3000m-nand
DEVICE_DTS_DIR := ../dts
DEVICE_DTC_FLAGS := --pad 4096
DEVICE_DTS_LOADADDR := 0x43f00000
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware kmod-usb3 \
e2fsprogs f2fsck mkf2fs
KERNEL_LOADADDR := 0x44000000
KERNEL := kernel-bin | gzip
KERNEL_INITRAMFS := kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
KERNEL_INITRAMFS_SUFFIX := -recovery.itb
KERNEL_IN_UBI := 1
UBOOTENV_IN_UBI := 1
IMAGES := sysupgrade.itb
IMAGE_SIZE := $$(shell expr 64 + $$(CONFIG_TARGET_ROOTFS_PARTSIZE))m
IMAGE/sysupgrade.itb := append-kernel | \
fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-static-with-rootfs | \
pad-rootfs | append-metadata
ARTIFACTS := \
emmc-gpt.bin emmc-preloader.bin emmc-bl31-uboot.fip \
nand-preloader.bin nand-bl31-uboot.fip
ARTIFACT/emmc-gpt.bin := mt798x-gpt emmc
ARTIFACT/emmc-preloader.bin := mt7981-bl2 emmc-ddr4
ARTIFACT/emmc-bl31-uboot.fip := mt7981-bl31-uboot cmcc_rax3000m-emmc
ARTIFACT/nand-preloader.bin := mt7981-bl2 spim-nand-ddr4
ARTIFACT/nand-bl31-uboot.fip := mt7981-bl31-uboot cmcc_rax3000m-nand
endef
TARGET_DEVICES += cmcc_rax3000m
define Device/comfast_cf-e393ax
DEVICE_VENDOR := COMFAST
DEVICE_MODEL := CF-E393AX
DEVICE_ALT0_VENDOR := COMFAST
DEVICE_ALT0_MODEL := CF-E395AX
DEVICE_DTS := mt7981a-comfast-cf-e393ax
DEVICE_DTS_DIR := ../dts
DEVICE_DTC_FLAGS := --pad 4096
DEVICE_DTS_LOADADDR := 0x43f00000
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware
KERNEL_LOADADDR := 0x44000000
KERNEL = kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
KERNEL_INITRAMFS = kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd
UBINIZE_OPTS := -E 5
BLOCKSIZE := 128k
PAGESIZE := 2048
IMAGE_SIZE := 65536k
KERNEL_IN_UBI := 1
IMAGES := sysupgrade.bin factory.bin
IMAGE/factory.bin := append-ubi | check-size $$$$(IMAGE_SIZE)
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
endef
TARGET_DEVICES += comfast_cf-e393ax
define Device/confiabits_mt7981
DEVICE_VENDOR := Confiabits
DEVICE_MODEL := MT7981
DEVICE_DTS := mt7981b-confiabits-mt7981
DEVICE_DTS_DIR := ../dts
SUPPORTED_DEVICES += mediatek,mt7981-spim-snand-2500wan-gmac2-rfb
UBINIZE_OPTS := -E 5
BLOCKSIZE := 128k
PAGESIZE := 2048
IMAGE_SIZE := 65536k
KERNEL_IN_UBI := 1
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
DEVICE_PACKAGES := kmod-usb3 kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware
endef
TARGET_DEVICES += confiabits_mt7981
define Device/cudy_ap3000outdoor-v1
DEVICE_VENDOR := Cudy
DEVICE_MODEL := AP3000 Outdoor
DEVICE_VARIANT := v1
DEVICE_DTS := mt7981b-cudy-ap3000outdoor-v1
DEVICE_DTS_DIR := ../dts
SUPPORTED_DEVICES += R51
UBINIZE_OPTS := -E 5
BLOCKSIZE := 128k
PAGESIZE := 2048
IMAGE_SIZE := 65536k
KERNEL_IN_UBI := 1
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware
endef
TARGET_DEVICES += cudy_ap3000outdoor-v1
define Device/cudy_ap3000-v1
DEVICE_VENDOR := Cudy
DEVICE_MODEL := AP3000
DEVICE_VARIANT := v1
DEVICE_DTS := mt7981b-cudy-ap3000-v1
DEVICE_DTS_DIR := ../dts
SUPPORTED_DEVICES += R49
UBINIZE_OPTS := -E 5
BLOCKSIZE := 128k
PAGESIZE := 2048
IMAGE_SIZE := 65536k
KERNEL_IN_UBI := 1
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware
endef
TARGET_DEVICES += cudy_ap3000-v1
define Device/cudy_m3000-v1
DEVICE_VENDOR := Cudy
DEVICE_MODEL := M3000
DEVICE_VARIANT := v1
DEVICE_DTS := mt7981b-cudy-m3000-v1
DEVICE_DTS_DIR := ../dts
SUPPORTED_DEVICES += R37
DEVICE_DTS_LOADADDR := 0x44000000
BLOCKSIZE := 128k
PAGESIZE := 2048
IMAGE_SIZE := 65536k
KERNEL_IN_UBI := 1
KERNEL := kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
KERNEL_INITRAMFS := kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
IMAGES := sysupgrade.bin
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware
endef
TARGET_DEVICES += cudy_m3000-v1
define Device/cudy_re3000-v1
DEVICE_VENDOR := Cudy
DEVICE_MODEL := RE3000
DEVICE_VARIANT := v1
DEVICE_DTS := mt7981b-cudy-re3000-v1
DEVICE_DTS_DIR := ../dts
DEVICE_DTS_LOADADDR := 0x47000000
IMAGES := sysupgrade.bin
IMAGE_SIZE := 15424k
SUPPORTED_DEVICES += R36
KERNEL := kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
KERNEL_INITRAMFS := kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
IMAGE/sysupgrade.bin := append-kernel | pad-to 128k | append-rootfs | pad-rootfs | check-size | append-metadata
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware
endef
TARGET_DEVICES += cudy_re3000-v1
define Device/cudy_tr3000-v1
DEVICE_VENDOR := Cudy
DEVICE_MODEL := TR3000
DEVICE_VARIANT := v1
DEVICE_DTS := mt7981b-cudy-tr3000-v1
DEVICE_DTS_DIR := ../dts
SUPPORTED_DEVICES += R47
UBINIZE_OPTS := -E 5
BLOCKSIZE := 128k
PAGESIZE := 2048
IMAGE_SIZE := 65536k
KERNEL_IN_UBI := 1
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
DEVICE_PACKAGES := kmod-usb3 kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware
endef
TARGET_DEVICES += cudy_tr3000-v1
define Device/cudy_wr3000-v1
DEVICE_VENDOR := Cudy
DEVICE_MODEL := WR3000
DEVICE_VARIANT := v1
DEVICE_DTS := mt7981b-cudy-wr3000-v1
DEVICE_DTS_DIR := ../dts
DEVICE_DTS_LOADADDR := 0x47000000
IMAGES := sysupgrade.bin
IMAGE_SIZE := 15424k
SUPPORTED_DEVICES += R31
KERNEL := kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
KERNEL_INITRAMFS := kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
IMAGE/sysupgrade.bin := append-kernel | pad-to 128k | append-rootfs | pad-rootfs | check-size | append-metadata
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware
endef
TARGET_DEVICES += cudy_wr3000-v1
define Device/cudy_wr3000s-v1
DEVICE_VENDOR := Cudy
DEVICE_MODEL := WR3000S
DEVICE_VARIANT := v1
DEVICE_DTS := mt7981b-cudy-wr3000s-v1
DEVICE_DTS_DIR := ../dts
SUPPORTED_DEVICES += R59
UBINIZE_OPTS := -E 5
BLOCKSIZE := 128k
PAGESIZE := 2048
IMAGE_SIZE := 65536k
KERNEL_IN_UBI := 1
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware
endef
TARGET_DEVICES += cudy_wr3000s-v1
define Device/cudy_wr3000h-v1
DEVICE_VENDOR := Cudy
DEVICE_MODEL := WR3000H
DEVICE_VARIANT := v1
DEVICE_DTS := mt7981b-cudy-wr3000h-v1
DEVICE_DTS_DIR := ../dts
SUPPORTED_DEVICES += R63
UBINIZE_OPTS := -E 5
BLOCKSIZE := 128k
PAGESIZE := 2048
IMAGE_SIZE := 65536k
KERNEL_IN_UBI := 1
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware
endef
TARGET_DEVICES += cudy_wr3000h-v1
define Device/dlink_aquila-pro-ai-m30-a1
DEVICE_VENDOR := D-Link
DEVICE_MODEL := AQUILA PRO AI M30
DEVICE_VARIANT := A1
DEVICE_DTS := mt7981b-dlink-aquila-pro-ai-m30-a1
DEVICE_DTS_DIR := ../dts
DEVICE_PACKAGES := kmod-leds-gca230718 kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware
KERNEL_IN_UBI := 1
IMAGES += recovery.bin
IMAGE_SIZE := 51200k
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
IMAGE/recovery.bin := sysupgrade-tar | pad-to $$(IMAGE_SIZE) | dlink-ai-recovery-header DLK6E6110001 \x6A\x28\xEE\x0B \x00\x00\x2C\x00 \x00\x00\x20\x03 \x61\x6E
endef
TARGET_DEVICES += dlink_aquila-pro-ai-m30-a1
define Device/dlink_aquila-pro-ai-m60-a1
DEVICE_VENDOR := D-Link
DEVICE_MODEL := AQUILA PRO AI M60
DEVICE_VARIANT := A1
DEVICE_DTS := mt7986a-dlink-aquila-pro-ai-m60-a1
DEVICE_DTS_DIR := ../dts
DEVICE_PACKAGES := kmod-leds-gca230718 kmod-mt7915e kmod-mt7986-firmware mt7986-wo-firmware
IMAGES += recovery.bin
IMAGE_SIZE := 51200k
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
IMAGE/recovery.bin := sysupgrade-tar | pad-to $$(IMAGE_SIZE) | dlink-ai-recovery-header DLK6E8202001 \x30\x6C\x19\x0C \x00\x00\x2C\x00 \x00\x00\x20\x03 \x82\x6E
endef
TARGET_DEVICES += dlink_aquila-pro-ai-m60-a1
define Device/edgecore_eap111
DEVICE_VENDOR := Edgecore
DEVICE_MODEL := EAP111
DEVICE_DTS := mt7981a-edgecore-eap111
DEVICE_DTS_DIR := ../dts
DEVICE_DTS_LOADADDR := 0x47000000
BLOCKSIZE := 128k
PAGESIZE := 2048
UBINIZE_OPTS := -E 5
KERNEL_IN_UBI := 1
IMAGE_SIZE := 65536k
IMAGES := sysupgrade.bin factory.bin
IMAGE/factory.bin := append-ubi | check-size $$$$(IMAGE_SIZE)
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware
endef
TARGET_DEVICES += edgecore_eap111
define Device/gatonetworks_gdsp
DEVICE_VENDOR := GatoNetworks
DEVICE_MODEL := gdsp
DEVICE_DTS := mt7981b-gatonetworks-gdsp
DEVICE_DTS_DIR := ../dts
IMAGES := sysupgrade.itb
IMAGE_SIZE := 32768k
DEVICE_PACKAGES := fitblk kmod-mt7915e kmod-mt7981-firmware \
kmod-usb-net-qmi-wwan kmod-usb-serial-option kmod-usb3 \
mt7981-wo-firmware -kmod-phy-aquantia
ARTIFACTS := preloader.bin bl31-uboot.fip
ARTIFACT/preloader.bin := mt7981-bl2 nor-ddr3
ARTIFACT/bl31-uboot.fip := mt7981-bl31-uboot gatonetworks_gdsp
KERNEL := kernel-bin | gzip
KERNEL_INITRAMFS := kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
IMAGE/sysupgrade.itb := append-kernel | fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-static-with-rootfs | pad-rootfs | append-metadata
endef
TARGET_DEVICES += gatonetworks_gdsp
define Device/glinet_gl-mt2500
DEVICE_VENDOR := GL.iNet
DEVICE_MODEL := GL-MT2500
DEVICE_DTS := mt7981b-glinet-gl-mt2500
DEVICE_DTS_DIR := ../dts
DEVICE_DTS_LOADADDR := 0x47000000
DEVICE_PACKAGES := -wpad-basic-mbedtls e2fsprogs f2fsck mkf2fs kmod-usb3
SUPPORTED_DEVICES += glinet,mt2500-emmc
IMAGES := sysupgrade.bin
IMAGE/sysupgrade.bin := sysupgrade-tar | append-gl-metadata
endef
TARGET_DEVICES += glinet_gl-mt2500
define Device/glinet_gl-mt3000
DEVICE_VENDOR := GL.iNet
DEVICE_MODEL := GL-MT3000
DEVICE_DTS := mt7981b-glinet-gl-mt3000
DEVICE_DTS_DIR := ../dts
SUPPORTED_DEVICES += glinet,mt3000-snand
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware kmod-hwmon-pwmfan kmod-usb3
UBINIZE_OPTS := -E 5
BLOCKSIZE := 128k
PAGESIZE := 2048
IMAGE_SIZE := 246272k
KERNEL_IN_UBI := 1
IMAGE/sysupgrade.bin := sysupgrade-tar | append-gl-metadata
endef
TARGET_DEVICES += glinet_gl-mt3000
define Device/glinet_gl-mt6000
DEVICE_VENDOR := GL.iNet
DEVICE_MODEL := GL-MT6000
DEVICE_DTS := mt7986a-glinet-gl-mt6000
DEVICE_DTS_DIR := ../dts
DEVICE_PACKAGES := e2fsprogs f2fsck mkf2fs kmod-usb3 kmod-mt7915e kmod-mt7986-firmware mt7986-wo-firmware
IMAGES += factory.bin
IMAGE/factory.bin := append-kernel | pad-to 32M | append-rootfs
IMAGE/sysupgrade.bin := sysupgrade-tar | append-gl-metadata
ARTIFACTS := preloader.bin bl31-uboot.fip
ARTIFACT/preloader.bin := mt7986-bl2 emmc-ddr4
ARTIFACT/bl31-uboot.fip := mt7986-bl31-uboot glinet_gl-mt6000
endef
TARGET_DEVICES += glinet_gl-mt6000
define Device/glinet_gl-x3000-xe3000-common
DEVICE_VENDOR := GL.iNet
DEVICE_DTS_DIR := ../dts
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware mkf2fs \
kmod-fs-f2fs kmod-hwmon-pwmfan kmod-usb3 kmod-usb-serial-option \
kmod-usb-storage kmod-usb-net-qmi-wwan uqmi
IMAGES += factory.bin
IMAGE/factory.bin := append-kernel | pad-to 32M | append-rootfs
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
ARTIFACTS := preloader.bin bl31-uboot.fip
ARTIFACT/preloader.bin := mt7981-bl2 emmc-ddr4
endef
define Device/glinet_gl-x3000
DEVICE_MODEL := GL-X3000
DEVICE_DTS := mt7981a-glinet-gl-x3000
SUPPORTED_DEVICES := glinet,gl-x3000
$(call Device/glinet_gl-x3000-xe3000-common)
ARTIFACT/bl31-uboot.fip := mt7981-bl31-uboot glinet_gl-x3000
endef
TARGET_DEVICES += glinet_gl-x3000
define Device/glinet_gl-xe3000
DEVICE_MODEL := GL-XE3000
DEVICE_DTS := mt7981a-glinet-gl-xe3000
SUPPORTED_DEVICES := glinet,gl-xe3000
$(call Device/glinet_gl-x3000-xe3000-common)
ARTIFACT/bl31-uboot.fip := mt7981-bl31-uboot glinet_gl-xe3000
endef
TARGET_DEVICES += glinet_gl-xe3000
define Device/h3c_magic-nx30-pro
DEVICE_VENDOR := H3C
DEVICE_MODEL := Magic NX30 Pro
DEVICE_DTS := mt7981b-h3c-magic-nx30-pro
DEVICE_DTS_DIR := ../dts
UBINIZE_OPTS := -E 5
BLOCKSIZE := 128k
PAGESIZE := 2048
KERNEL_IN_UBI := 1
UBOOTENV_IN_UBI := 1
IMAGE_SIZE := 65536k
IMAGES := sysupgrade.itb
KERNEL_INITRAMFS_SUFFIX := -recovery.itb
KERNEL := kernel-bin | gzip
KERNEL_INITRAMFS := kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
IMAGE/sysupgrade.itb := append-kernel | \
fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-static-with-rootfs | append-metadata
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware
ARTIFACTS := preloader.bin bl31-uboot.fip
ARTIFACT/preloader.bin := mt7981-bl2 spim-nand-ddr3
ARTIFACT/bl31-uboot.fip := mt7981-bl31-uboot h3c_magic-nx30-pro
endef
TARGET_DEVICES += h3c_magic-nx30-pro
define Device/huasifei_wh3000
DEVICE_VENDOR := Huasifei
DEVICE_MODEL := WH3000
DEVICE_DTS := mt7981b-huasifei-wh3000
DEVICE_DTS_DIR := ../dts
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware \
kmod-usb3 f2fsck mkf2fs
SUPPORTED_DEVICES += huasifei,wh3000-emmc
KERNEL := kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
KERNEL_INITRAMFS := kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
endef
TARGET_DEVICES += huasifei_wh3000
define Device/jcg_q30-pro
DEVICE_VENDOR := JCG
DEVICE_MODEL := Q30 PRO
DEVICE_DTS := mt7981b-jcg-q30-pro
DEVICE_DTS_DIR := ../dts
UBINIZE_OPTS := -E 5
BLOCKSIZE := 128k
PAGESIZE := 2048
KERNEL_IN_UBI := 1
UBOOTENV_IN_UBI := 1
IMAGES := sysupgrade.itb
KERNEL_INITRAMFS_SUFFIX := -recovery.itb
KERNEL := kernel-bin | gzip
KERNEL_INITRAMFS := kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
IMAGE/sysupgrade.itb := append-kernel | \
fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-static-with-rootfs | append-metadata
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware
ARTIFACTS := preloader.bin bl31-uboot.fip
ARTIFACT/preloader.bin := mt7981-bl2 spim-nand-ddr3
ARTIFACT/bl31-uboot.fip := mt7981-bl31-uboot jcg_q30-pro
endef
TARGET_DEVICES += jcg_q30-pro
define Device/jdcloud_re-cp-03
DEVICE_VENDOR := JDCloud
DEVICE_MODEL := RE-CP-03
DEVICE_DTS := mt7986a-jdcloud-re-cp-03
DEVICE_DTS_DIR := ../dts
DEVICE_DTC_FLAGS := --pad 4096
DEVICE_DTS_LOADADDR := 0x43f00000
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7986-firmware mt7986-wo-firmware \
e2fsprogs f2fsck mkf2fs
KERNEL_LOADADDR := 0x44000000
KERNEL := kernel-bin | gzip
KERNEL_INITRAMFS := kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
KERNEL_INITRAMFS_SUFFIX := -recovery.itb
IMAGES := sysupgrade.itb
IMAGE_SIZE := $$(shell expr 64 + $$(CONFIG_TARGET_ROOTFS_PARTSIZE))m
IMAGE/sysupgrade.itb := append-kernel | \
fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-static-with-rootfs | \
pad-rootfs | append-metadata
ARTIFACTS :=gpt.bin preloader.bin bl31-uboot.fip
ARTIFACT/gpt.bin := mt798x-gpt emmc
ARTIFACT/preloader.bin := mt7986-bl2 emmc-ddr4
ARTIFACT/bl31-uboot.fip := mt7986-bl31-uboot jdcloud_re-cp-03
endef
TARGET_DEVICES += jdcloud_re-cp-03
define Device/keenetic_kn-3811
DEVICE_VENDOR := Keenetic
DEVICE_MODEL := KN-3811
DEVICE_DTS := mt7981b-keenetic-kn-3811
DEVICE_DTS_DIR := ../dts
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware kmod-usb3
UBINIZE_OPTS := -E 5
BLOCKSIZE := 128k
PAGESIZE := 2048
KERNEL_SIZE := 6144k
IMAGE_SIZE := 233984k
KERNEL := kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb | \
append-squashfs4-fakeroot
IMAGES += factory.bin
IMAGE/factory.bin := append-kernel | pad-to $$(KERNEL_SIZE) | \
append-ubi | check-size | zyimage -d 0x803811 -v "KN-3811"
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
endef
TARGET_DEVICES += keenetic_kn-3811
define Device/keenetic_kn-3911
DEVICE_VENDOR := Keenetic
DEVICE_MODEL := KN-3911
DEVICE_DTS := mt7981b-keenetic-kn-3911
DEVICE_DTS_DIR := ../dts
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware kmod-phy-airoha-en8811h
UBINIZE_OPTS := -E 5
BLOCKSIZE := 128k
PAGESIZE := 2048
KERNEL_SIZE := 6144k
IMAGE_SIZE := 108544k
KERNEL := kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb | \
append-squashfs4-fakeroot
IMAGES += factory.bin
IMAGE/factory.bin := append-kernel | pad-to $$(KERNEL_SIZE) | \
append-ubi | check-size | zyimage -d 0x803911 -v "KN-3911"
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
endef
TARGET_DEVICES += keenetic_kn-3911
define Device/mediatek_mt7981-rfb
DEVICE_VENDOR := MediaTek
DEVICE_MODEL := MT7981 rfb
DEVICE_DTS := mt7981-rfb
DEVICE_DTS_OVERLAY:= \
mt7981-rfb-spim-nand \
mt7981-rfb-mxl-2p5g-phy-eth1 \
mt7981-rfb-mxl-2p5g-phy-swp5
DEVICE_DTS_DIR := $(DTS_DIR)/
DEVICE_DTC_FLAGS := --pad 4096
DEVICE_DTS_LOADADDR := 0x43f00000
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware kmod-usb3 e2fsprogs f2fsck mkf2fs mt7981-wo-firmware
KERNEL_LOADADDR := 0x44000000
KERNEL := kernel-bin | gzip
KERNEL_INITRAMFS := kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
KERNEL_INITRAMFS_SUFFIX := .itb
KERNEL_IN_UBI := 1
UBOOTENV_IN_UBI := 1
IMAGES := sysupgrade.itb
IMAGE_SIZE := $$(shell expr 64 + $$(CONFIG_TARGET_ROOTFS_PARTSIZE))m
IMAGE/sysupgrade.itb := append-kernel | fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-with-rootfs | pad-rootfs | append-metadata
ARTIFACTS := \
emmc-preloader.bin emmc-bl31-uboot.fip \
nor-preloader.bin nor-bl31-uboot.fip \
sdcard.img.gz \
snfi-nand-preloader.bin snfi-nand-bl31-uboot.fip \
spim-nand-preloader.bin spim-nand-bl31-uboot.fip
ARTIFACT/emmc-preloader.bin := mt7981-bl2 emmc-ddr3
ARTIFACT/emmc-bl31-uboot.fip := mt7981-bl31-uboot rfb-emmc
ARTIFACT/nor-preloader.bin := mt7981-bl2 nor-ddr3
ARTIFACT/nor-bl31-uboot.fip := mt7981-bl31-uboot rfb-emmc
ARTIFACT/snfi-nand-preloader.bin := mt7981-bl2 snand-ddr3
ARTIFACT/snfi-nand-bl31-uboot.fip := mt7981-bl31-uboot rfb-snfi
ARTIFACT/spim-nand-preloader.bin := mt7981-bl2 spim-nand-ddr3
ARTIFACT/spim-nand-bl31-uboot.fip := mt7981-bl31-uboot rfb-spim-nand
ARTIFACT/sdcard.img.gz := mt798x-gpt sdmmc |\
pad-to 17k | mt7981-bl2 sdmmc-ddr3 |\
pad-to 6656k | mt7981-bl31-uboot rfb-sd |\
$(if $(CONFIG_TARGET_ROOTFS_INITRAMFS),\
pad-to 12M | append-image-stage initramfs.itb | check-size 44m |\
) \
pad-to 44M | mt7981-bl2 spim-nand-ddr3 |\
pad-to 45M | mt7981-bl31-uboot rfb-spim-nand |\
pad-to 49M | mt7981-bl2 nor-ddr3 |\
pad-to 50M | mt7981-bl31-uboot rfb-nor |\
pad-to 51M | mt7981-bl2 snand-ddr3 |\
pad-to 53M | mt7981-bl31-uboot rfb-snfi |\
$(if $(CONFIG_TARGET_ROOTFS_SQUASHFS),\
pad-to 64M | append-image squashfs-sysupgrade.itb | check-size |\
) \
gzip
endef
TARGET_DEVICES += mediatek_mt7981-rfb
define Device/mediatek_mt7986a-rfb-nand
DEVICE_VENDOR := MediaTek
DEVICE_MODEL := MT7986 rfba AP (NAND)
DEVICE_DTS := mt7986a-rfb-spim-nand
DEVICE_DTS_DIR := $(DTS_DIR)/
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7986-firmware mt7986-wo-firmware
SUPPORTED_DEVICES := mediatek,mt7986a-rfb-snand
UBINIZE_OPTS := -E 5
BLOCKSIZE := 128k
PAGESIZE := 2048
IMAGE_SIZE := 65536k
KERNEL_IN_UBI := 1
IMAGES += factory.bin
IMAGE/factory.bin := append-ubi | check-size $$$$(IMAGE_SIZE)
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
KERNEL = kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
KERNEL_INITRAMFS = kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd
endef
TARGET_DEVICES += mediatek_mt7986a-rfb-nand
define Device/mediatek_mt7986b-rfb
DEVICE_VENDOR := MediaTek
DEVICE_MODEL := MTK7986 rfbb AP
DEVICE_DTS := mt7986b-rfb
DEVICE_DTS_DIR := $(DTS_DIR)/
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7986-firmware mt7986-wo-firmware
SUPPORTED_DEVICES := mediatek,mt7986b-rfb
UBINIZE_OPTS := -E 5
BLOCKSIZE := 128k
PAGESIZE := 2048
IMAGE_SIZE := 65536k
KERNEL_IN_UBI := 1
IMAGES += factory.bin
IMAGE/factory.bin := append-ubi | check-size $$$$(IMAGE_SIZE)
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
endef
TARGET_DEVICES += mediatek_mt7986b-rfb
define Device/mediatek_mt7988a-rfb
DEVICE_VENDOR := MediaTek
DEVICE_MODEL := MT7988A rfb
DEVICE_DTS := mt7988a-rfb
DEVICE_DTS_OVERLAY:= \
mt7988a-rfb-emmc \
mt7988a-rfb-sd \
mt7988a-rfb-snfi-nand \
mt7988a-rfb-spim-nand \
mt7988a-rfb-spim-nand-factory \
mt7988a-rfb-spim-nor \
mt7988a-rfb-eth1-aqr \
mt7988a-rfb-eth1-i2p5g-phy \
mt7988a-rfb-eth1-mxl \
mt7988a-rfb-eth1-sfp \
mt7988a-rfb-eth2-aqr \
mt7988a-rfb-eth2-mxl \
mt7988a-rfb-eth2-sfp
DEVICE_DTS_DIR := $(DTS_DIR)/
DEVICE_DTC_FLAGS := --pad 4096
DEVICE_DTS_LOADADDR := 0x45f00000
DEVICE_PACKAGES := mt7988-2p5g-phy-firmware kmod-sfp
KERNEL_LOADADDR := 0x46000000
KERNEL := kernel-bin | gzip
KERNEL_INITRAMFS := kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
KERNEL_INITRAMFS_SUFFIX := .itb
KERNEL_IN_UBI := 1
IMAGE_SIZE := $$(shell expr 64 + $$(CONFIG_TARGET_ROOTFS_PARTSIZE))m
IMAGES := sysupgrade.itb
IMAGE/sysupgrade.itb := append-kernel | fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-with-rootfs | pad-rootfs | append-metadata
ARTIFACTS := \
emmc-gpt.bin emmc-preloader.bin emmc-bl31-uboot.fip \
nor-preloader.bin nor-bl31-uboot.fip \
sdcard.img.gz \
snand-preloader.bin snand-bl31-uboot.fip
ARTIFACT/emmc-gpt.bin := mt798x-gpt emmc
ARTIFACT/emmc-preloader.bin := mt7988-bl2 emmc-comb
ARTIFACT/emmc-bl31-uboot.fip := mt7988-bl31-uboot rfb-emmc
ARTIFACT/nor-preloader.bin := mt7988-bl2 nor-comb
ARTIFACT/nor-bl31-uboot.fip := mt7988-bl31-uboot rfb-nor
ARTIFACT/snand-preloader.bin := mt7988-bl2 spim-nand-ubi-comb
ARTIFACT/snand-bl31-uboot.fip := mt7988-bl31-uboot rfb-snand
ARTIFACT/sdcard.img.gz := mt798x-gpt sdmmc |\
pad-to 17k | mt7988-bl2 sdmmc-comb |\
pad-to 6656k | mt7988-bl31-uboot rfb-sd |\
$(if $(CONFIG_TARGET_ROOTFS_INITRAMFS),\
pad-to 12M | append-image-stage initramfs.itb | check-size 44m |\
) \
pad-to 44M | mt7988-bl2 spim-nand-comb |\
pad-to 45M | mt7988-bl31-uboot rfb-snand |\
pad-to 51M | mt7988-bl2 nor-comb |\
pad-to 51M | mt7988-bl31-uboot rfb-nor |\
pad-to 55M | mt7988-bl2 emmc-comb |\
pad-to 56M | mt7988-bl31-uboot rfb-emmc |\
pad-to 62M | mt798x-gpt emmc |\
$(if $(CONFIG_TARGET_ROOTFS_SQUASHFS),\
pad-to 64M | append-image squashfs-sysupgrade.itb | check-size |\
) \
gzip
endef
TARGET_DEVICES += mediatek_mt7988a-rfb
define Device/mercusys_mr90x-v1
DEVICE_VENDOR := MERCUSYS
DEVICE_MODEL := MR90X v1
DEVICE_DTS := mt7986b-mercusys-mr90x-v1
DEVICE_DTS_DIR := ../dts
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7986-firmware mt7986-wo-firmware
UBINIZE_OPTS := -E 5
BLOCKSIZE := 128k
PAGESIZE := 2048
IMAGE_SIZE := 51200k
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
endef
TARGET_DEVICES += mercusys_mr90x-v1
define Device/mercusys_mr90x-v1-ubi
DEVICE_VENDOR := MERCUSYS
DEVICE_MODEL := MR90X v1 (UBI)
DEVICE_DTS := mt7986b-mercusys-mr90x-v1-ubi
DEVICE_DTS_DIR := ../dts
DEVICE_DTC_FLAGS := --pad 4096
DEVICE_DTS_LOADADDR := 0x43f00000
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7986-firmware mt7986-wo-firmware
UBINIZE_OPTS := -E 5
BLOCKSIZE := 128k
PAGESIZE := 2048
KERNEL_IN_UBI := 1
UBOOTENV_IN_UBI := 1
IMAGES := sysupgrade.itb
KERNEL_INITRAMFS_SUFFIX := -recovery.itb
KERNEL := kernel-bin | gzip
KERNEL_INITRAMFS := kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | \
pad-to 64k
IMAGE/sysupgrade.itb := append-kernel | \
fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-with-rootfs | \
append-metadata
ARTIFACTS := bl31-uboot.fip preloader.bin
ARTIFACT/bl31-uboot.fip := mt7986-bl31-uboot mercusys_mr90x-v1
ARTIFACT/preloader.bin := mt7986-bl2 spim-nand-ubi-ddr3
endef
TARGET_DEVICES += mercusys_mr90x-v1-ubi
define Device/netcore_n60
DEVICE_VENDOR := Netcore
DEVICE_MODEL := N60
DEVICE_DTS := mt7986a-netcore-n60
DEVICE_DTS_DIR := ../dts
UBINIZE_OPTS := -E 5
BLOCKSIZE := 128k
PAGESIZE := 2048
KERNEL_IN_UBI := 1
UBOOTENV_IN_UBI := 1
IMAGES := sysupgrade.itb
KERNEL_INITRAMFS_SUFFIX := -recovery.itb
KERNEL := kernel-bin | gzip
KERNEL_INITRAMFS := kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
IMAGE/sysupgrade.itb := append-kernel | \
fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-static-with-rootfs | append-metadata
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7986-firmware mt7986-wo-firmware
ARTIFACTS := preloader.bin bl31-uboot.fip
ARTIFACT/preloader.bin := mt7986-bl2 spim-nand-ddr3
ARTIFACT/bl31-uboot.fip := mt7986-bl31-uboot netcore_n60
endef
TARGET_DEVICES += netcore_n60
define Device/netgear_wax220
DEVICE_VENDOR := NETGEAR
DEVICE_MODEL := WAX220
DEVICE_DTS := mt7986b-netgear-wax220
DEVICE_DTS_DIR := ../dts
NETGEAR_ENC_MODEL := WAX220
NETGEAR_ENC_REGION := US
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7986-firmware mt7986-wo-firmware
KERNEL_INITRAMFS_SUFFIX := -recovery.itb
IMAGE_SIZE := 32768k
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
IMAGES += factory.img
# Padding to 10M seems to be required by OEM web interface
IMAGE/factory.img := sysupgrade-tar | \
pad-to 10M | check-size | netgear-encrypted-factory
endef
TARGET_DEVICES += netgear_wax220
define Device/netis_nx31
DEVICE_VENDOR := netis
DEVICE_MODEL := NX31
DEVICE_DTS := mt7981b-netis-nx31
DEVICE_DTS_DIR := ../dts
UBINIZE_OPTS := -E 5
BLOCKSIZE := 128k
PAGESIZE := 2048
KERNEL_IN_UBI := 1
UBOOTENV_IN_UBI := 1
IMAGES := sysupgrade.itb
KERNEL_INITRAMFS_SUFFIX := -recovery.itb
KERNEL := kernel-bin | gzip
KERNEL_INITRAMFS := kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
IMAGE/sysupgrade.itb := append-kernel | \
fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-static-with-rootfs | \
append-metadata
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware
ARTIFACTS := preloader.bin bl31-uboot.fip
ARTIFACT/preloader.bin := mt7981-bl2 spim-nand-ddr3
ARTIFACT/bl31-uboot.fip := mt7981-bl31-uboot netis_nx31
endef
TARGET_DEVICES += netis_nx31
define Device/nokia_ea0326gmp
DEVICE_VENDOR := Nokia
DEVICE_MODEL := EA0326GMP
DEVICE_DTS := mt7981b-nokia-ea0326gmp
DEVICE_DTS_DIR := ../dts
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware
UBINIZE_OPTS := -E 5
BLOCKSIZE := 128k
PAGESIZE := 2048
KERNEL_IN_UBI := 1
UBOOTENV_IN_UBI := 1
IMAGES := sysupgrade.itb
KERNEL_INITRAMFS_SUFFIX := -recovery.itb
KERNEL := kernel-bin | gzip
KERNEL_INITRAMFS := kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
IMAGE/sysupgrade.itb := append-kernel | \
fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-static-with-rootfs | append-metadata
ARTIFACTS := preloader.bin bl31-uboot.fip
ARTIFACT/preloader.bin := mt7981-bl2 spim-nand-ddr3
ARTIFACT/bl31-uboot.fip := mt7981-bl31-uboot nokia_ea0326gmp
endef
TARGET_DEVICES += nokia_ea0326gmp
define Device/nradio_c8-668gl
DEVICE_VENDOR := NRadio
DEVICE_MODEL := C8-668GL
DEVICE_DTS := mt7981b-nradio-c8-668gl
DEVICE_DTS_DIR := ../dts
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware \
kmod-usb-serial-option kmod-usb-net-cdc-ether kmod-usb-net-qmi-wwan \
kmod-usb3
IMAGE_SIZE := 131072k
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata | check-size
endef
TARGET_DEVICES += nradio_c8-668gl
define Device/openembed_som7981
DEVICE_VENDOR := OpenEmbed
DEVICE_MODEL := SOM7981
DEVICE_DTS := mt7981b-openembed-som7981
DEVICE_DTS_DIR := ../dts
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware \
kmod-crypto-hw-atmel kmod-eeprom-at24 kmod-gpio-beeper kmod-rtc-pcf8563 \
kmod-usb-net-cdc-mbim kmod-usb-net-qmi-wwan kmod-usb-serial-option \
kmod-usb3 uqmi
UBINIZE_OPTS := -E 5
BLOCKSIZE := 128k
PAGESIZE := 2048
IMAGE_SIZE := 244224k
KERNEL_IN_UBI := 1
IMAGES += factory.bin
IMAGE/factory.bin := append-ubi | check-size $$$$(IMAGE_SIZE)
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
endef
TARGET_DEVICES += openembed_som7981
define Device/openwrt_one
DEVICE_VENDOR := OpenWrt
DEVICE_MODEL := One
DEVICE_DTS := mt7981b-openwrt-one
DEVICE_DTS_DIR := ../dts
DEVICE_DTC_FLAGS := --pad 4096
DEVICE_DTS_LOADADDR := 0x43f00000
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware kmod-rtc-pcf8563 kmod-usb3 kmod-phy-airoha-en8811h
KERNEL_LOADADDR := 0x44000000
KERNEL := kernel-bin | gzip
KERNEL_INITRAMFS := kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
KERNEL_INITRAMFS_SUFFIX := .itb
KERNEL_IN_UBI := 1
UBOOTENV_IN_UBI := 1
IMAGES := sysupgrade.itb
IMAGE_SIZE := $$(shell expr 64 + $$(CONFIG_TARGET_ROOTFS_PARTSIZE))m
IMAGE/sysupgrade.itb := append-kernel | fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-with-rootfs | pad-rootfs | append-metadata
ARTIFACTS := \
nor-preloader.bin nor-bl31-uboot.fip \
snand-preloader.bin snand-bl31-uboot.fip \
factory.ubi snand-factory.bin nor-factory.bin
ARTIFACT/nor-preloader.bin := mt7981-bl2 nor-ddr4
ARTIFACT/nor-bl31-uboot.fip := mt7981-bl31-uboot openwrt_one-nor
ARTIFACT/snand-preloader.bin := mt7981-bl2 spim-nand-ubi-ddr4
ARTIFACT/snand-bl31-uboot.fip := mt7981-bl31-uboot openwrt_one-snand
ARTIFACT/factory.ubi := ubinize-image fit squashfs-sysupgrade.itb
ARTIFACT/snand-factory.bin := mt7981-bl2 spim-nand-ubi-ddr4 | pad-to 256k | \
mt7981-bl2 spim-nand-ubi-ddr4 | pad-to 512k | \
mt7981-bl2 spim-nand-ubi-ddr4 | pad-to 768k | \
mt7981-bl2 spim-nand-ubi-ddr4 | pad-to 1024k | \
ubinize-image fit squashfs-sysupgrade.itb
ARTIFACT/nor-factory.bin := mt7981-bl2 nor-ddr4 | pad-to 256k | \
append-openwrt-one-eeprom | pad-to 1024k | \
mt7981-bl31-uboot openwrt_one-nor | pad-to 512k | \
append-image-stage initramfs.itb
UBINIZE_OPTS := -E 5
BLOCKSIZE := 128k
PAGESIZE := 2048
UBINIZE_PARTS := fip=:$(STAGING_DIR_IMAGE)/mt7981_openwrt_one-snand-u-boot.fip \
$(if $(IB),recovery=:$(STAGING_DIR_IMAGE)/mediatek-filogic-openwrt_one-initramfs.itb,\
recovery=:$(KDIR)/tmp/$$(KERNEL_INITRAMFS_IMAGE)) \
$(if $(wildcard $(TOPDIR)/openwrt-mediatek-filogic-openwrt_one-calibration.itb), calibration=:$(TOPDIR)/openwrt-mediatek-filogic-openwrt_one-calibration.itb)
endef
TARGET_DEVICES += openwrt_one
define Device/qihoo_360t7
DEVICE_VENDOR := Qihoo
DEVICE_MODEL := 360T7
DEVICE_DTS := mt7981b-qihoo-360t7
DEVICE_DTS_DIR := ../dts
UBINIZE_OPTS := -E 5
BLOCKSIZE := 128k
PAGESIZE := 2048
KERNEL_IN_UBI := 1
UBOOTENV_IN_UBI := 1
IMAGES := sysupgrade.itb
KERNEL_INITRAMFS_SUFFIX := -recovery.itb
KERNEL := kernel-bin | gzip
KERNEL_INITRAMFS := kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
IMAGE/sysupgrade.itb := append-kernel | \
fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-static-with-rootfs | append-metadata
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware
ARTIFACTS := preloader.bin bl31-uboot.fip
ARTIFACT/preloader.bin := mt7981-bl2 spim-nand-ddr3
ARTIFACT/bl31-uboot.fip := mt7981-bl31-uboot qihoo_360t7
endef
TARGET_DEVICES += qihoo_360t7
define Device/routerich_ax3000
DEVICE_VENDOR := Routerich
DEVICE_MODEL := AX3000
DEVICE_DTS := mt7981b-routerich-ax3000
DEVICE_DTS_DIR := ../dts
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware kmod-usb3
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
SUPPORTED_DEVICES += mediatek,mt7981-spim-snand-rfb
DEVICE_COMPAT_VERSION := 1.1
DEVICE_COMPAT_MESSAGE := Partition layout has been changed. Bootloader MUST be \
upgraded to avoid data corruption and getting bricked. \
Please, contact your vendor and follow the guide: \
https://openwrt.org/toh/routerich/ax3000#web_ui_method
endef
TARGET_DEVICES += routerich_ax3000
define Device/routerich_ax3000-ubootmod
DEVICE_VENDOR := Routerich
DEVICE_MODEL := AX3000 (OpenWrt U-Boot layout)
DEVICE_DTS := mt7981b-routerich-ax3000-ubootmod
DEVICE_DTS_DIR := ../dts
UBINIZE_OPTS := -E 5
BLOCKSIZE := 128k
PAGESIZE := 2048
KERNEL_IN_UBI := 1
UBOOTENV_IN_UBI := 1
IMAGES := sysupgrade.itb
KERNEL_INITRAMFS_SUFFIX := -recovery.itb
KERNEL := kernel-bin | gzip
KERNEL_INITRAMFS := kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
IMAGE/sysupgrade.itb := append-kernel | \
fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-static-with-rootfs | \
append-metadata
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware kmod-usb3 mt7981-wo-firmware
ARTIFACTS := preloader.bin bl31-uboot.fip
ARTIFACT/preloader.bin := mt7981-bl2 spim-nand-ddr3
ARTIFACT/bl31-uboot.fip := mt7981-bl31-uboot routerich_ax3000
endef
TARGET_DEVICES += routerich_ax3000-ubootmod
define Device/ruijie_rg-x60-pro
DEVICE_VENDOR := Ruijie
DEVICE_MODEL := RG-X60 Pro
DEVICE_DTS := mt7986a-ruijie-rg-x60-pro
DEVICE_DTS_DIR := ../dts
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7986-firmware mt7986-wo-firmware
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
endef
TARGET_DEVICES += ruijie_rg-x60-pro
define Device/tenbay_wr3000k
DEVICE_VENDOR := Tenbay
DEVICE_MODEL := WR3000K
DEVICE_DTS := mt7981b-tenbay-wr3000k
DEVICE_DTS_DIR := ../dts
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware
UBINIZE_OPTS := -E 5
BLOCKSIZE := 128k
PAGESIZE := 2048
IMAGE_SIZE := 49152k
KERNEL_IN_UBI := 1
IMAGES += factory.bin
IMAGE/factory.bin := append-ubi | check-size $$$$(IMAGE_SIZE)
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
KERNEL = kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
KERNEL_INITRAMFS = kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd
endef
TARGET_DEVICES += tenbay_wr3000k
define Device/tplink_re6000xd
DEVICE_VENDOR := TP-Link
DEVICE_MODEL := RE6000XD
DEVICE_DTS := mt7986b-tplink-re6000xd
DEVICE_DTS_DIR := ../dts
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7986-firmware mt7986-wo-firmware
UBINIZE_OPTS := -E 5
BLOCKSIZE := 128k
PAGESIZE := 2048
IMAGE_SIZE := 51200k
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
endef
TARGET_DEVICES += tplink_re6000xd
define Device/tplink_tl-xdr-common
DEVICE_VENDOR := TP-Link
DEVICE_DTS_DIR := ../dts
UBINIZE_OPTS := -E 5
BLOCKSIZE := 128k
PAGESIZE := 2048
KERNEL_IN_UBI := 1
UBOOTENV_IN_UBI := 1
IMAGES := sysupgrade.itb
KERNEL_INITRAMFS_SUFFIX := -recovery.itb
KERNEL := kernel-bin | gzip
KERNEL_INITRAMFS := kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
IMAGE/sysupgrade.itb := append-kernel | \
fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-with-rootfs | append-metadata
DEVICE_PACKAGES := fitblk kmod-usb3 kmod-mt7915e kmod-mt7986-firmware mt7986-wo-firmware
ARTIFACTS := preloader.bin bl31-uboot.fip
ARTIFACT/preloader.bin := mt7986-bl2 spim-nand-ddr3
endef
define Device/tplink_tl-xdr4288
DEVICE_MODEL := TL-XDR4288
DEVICE_DTS := mt7986a-tplink-tl-xdr4288
ARTIFACT/bl31-uboot.fip := mt7986-bl31-uboot tplink_tl-xdr4288
$(call Device/tplink_tl-xdr-common)
endef
TARGET_DEVICES += tplink_tl-xdr4288
define Device/tplink_tl-xdr6086
DEVICE_MODEL := TL-XDR6086
DEVICE_DTS := mt7986a-tplink-tl-xdr6086
ARTIFACT/bl31-uboot.fip := mt7986-bl31-uboot tplink_tl-xdr6086
$(call Device/tplink_tl-xdr-common)
endef
TARGET_DEVICES += tplink_tl-xdr6086
define Device/tplink_tl-xdr6088
DEVICE_MODEL := TL-XDR6088
DEVICE_DTS := mt7986a-tplink-tl-xdr6088
ARTIFACT/bl31-uboot.fip := mt7986-bl31-uboot tplink_tl-xdr6088
$(call Device/tplink_tl-xdr-common)
endef
TARGET_DEVICES += tplink_tl-xdr6088
define Device/tplink_tl-xtr8488
DEVICE_MODEL := TL-XTR8488
DEVICE_DTS := mt7986a-tplink-tl-xtr8488
$(call Device/tplink_tl-xdr-common)
DEVICE_PACKAGES += kmod-mt7915-firmware
ARTIFACT/preloader.bin := mt7986-bl2 spim-nand-ddr4
ARTIFACT/bl31-uboot.fip := mt7986-bl31-uboot tplink_tl-xtr8488
endef
TARGET_DEVICES += tplink_tl-xtr8488
define Device/ubnt_unifi-6-plus
DEVICE_VENDOR := Ubiquiti
DEVICE_MODEL := UniFi U6+
DEVICE_DTS := mt7981a-ubnt-unifi-6-plus
DEVICE_DTS_DIR := ../dts
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware e2fsprogs f2fsck mkf2fs fdisk partx-utils
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
endef
TARGET_DEVICES += ubnt_unifi-6-plus
define Device/unielec_u7981-01
DEVICE_VENDOR := Unielec
DEVICE_MODEL := U7981-01
DEVICE_DTS_DIR := ../dts
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware kmod-usb3 e2fsprogs f2fsck mkf2fs fdisk partx-utils
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
endef
define Device/unielec_u7981-01-emmc
DEVICE_DTS := mt7981b-unielec-u7981-01-emmc
DEVICE_VARIANT := (EMMC)
$(call Device/unielec_u7981-01)
endef
TARGET_DEVICES += unielec_u7981-01-emmc
define Device/unielec_u7981-01-nand
DEVICE_DTS := mt7981b-unielec-u7981-01-nand
DEVICE_VARIANT := (NAND)
$(call Device/unielec_u7981-01)
endef
TARGET_DEVICES += unielec_u7981-01-nand
define Device/wavlink_wl-wn586x3
DEVICE_VENDOR := WAVLINK
DEVICE_MODEL := WL-WN586X3
DEVICE_DTS := mt7981b-wavlink-wl-wn586x3
DEVICE_DTS_DIR := ../dts
DEVICE_DTS_LOADADDR := 0x47000000
IMAGE_SIZE := 15424k
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware
endef
TARGET_DEVICES += wavlink_wl-wn586x3
define Device/xiaomi_mi-router-ax3000t
DEVICE_VENDOR := Xiaomi
DEVICE_MODEL := Mi Router AX3000T
DEVICE_DTS := mt7981b-xiaomi-mi-router-ax3000t
DEVICE_DTS_DIR := ../dts
UBINIZE_OPTS := -E 5
BLOCKSIZE := 128k
PAGESIZE := 2048
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware
ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
ARTIFACTS := initramfs-factory.ubi
ARTIFACT/initramfs-factory.ubi := append-image-stage initramfs-kernel.bin | ubinize-kernel
endif
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
endef
TARGET_DEVICES += xiaomi_mi-router-ax3000t
define Device/xiaomi_mi-router-ax3000t-ubootmod
DEVICE_VENDOR := Xiaomi
DEVICE_MODEL := Mi Router AX3000T (OpenWrt U-Boot layout)
DEVICE_DTS := mt7981b-xiaomi-mi-router-ax3000t-ubootmod
DEVICE_DTS_DIR := ../dts
UBINIZE_OPTS := -E 5
BLOCKSIZE := 128k
PAGESIZE := 2048
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware
KERNEL_IN_UBI := 1
UBOOTENV_IN_UBI := 1
IMAGES := sysupgrade.itb
KERNEL_INITRAMFS_SUFFIX := -recovery.itb
KERNEL := kernel-bin | gzip
KERNEL_INITRAMFS := kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
IMAGE/sysupgrade.itb := append-kernel | \
fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-static-with-rootfs | append-metadata
ARTIFACTS := preloader.bin bl31-uboot.fip
ARTIFACT/preloader.bin := mt7981-bl2 spim-nand-ddr3
ARTIFACT/bl31-uboot.fip := mt7981-bl31-uboot xiaomi_mi-router-ax3000t
ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
ARTIFACTS += initramfs-factory.ubi
ARTIFACT/initramfs-factory.ubi := append-image-stage initramfs-recovery.itb | ubinize-kernel
endif
endef
TARGET_DEVICES += xiaomi_mi-router-ax3000t-ubootmod
define Device/xiaomi_mi-router-wr30u-stock
DEVICE_VENDOR := Xiaomi
DEVICE_MODEL := Mi Router WR30U (stock layout)
DEVICE_DTS := mt7981b-xiaomi-mi-router-wr30u-stock
DEVICE_DTS_DIR := ../dts
UBINIZE_OPTS := -E 5
BLOCKSIZE := 128k
PAGESIZE := 2048
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware
ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
ARTIFACTS := initramfs-factory.ubi
ARTIFACT/initramfs-factory.ubi := append-image-stage initramfs-kernel.bin | ubinize-kernel
endif
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
endef
TARGET_DEVICES += xiaomi_mi-router-wr30u-stock
define Device/xiaomi_mi-router-wr30u-ubootmod
DEVICE_VENDOR := Xiaomi
DEVICE_MODEL := Mi Router WR30U (OpenWrt U-Boot layout)
DEVICE_DTS := mt7981b-xiaomi-mi-router-wr30u-ubootmod
DEVICE_DTS_DIR := ../dts
UBINIZE_OPTS := -E 5
BLOCKSIZE := 128k
PAGESIZE := 2048
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware
KERNEL_IN_UBI := 1
UBOOTENV_IN_UBI := 1
IMAGES := sysupgrade.itb
KERNEL_INITRAMFS_SUFFIX := -recovery.itb
KERNEL := kernel-bin | gzip
KERNEL_INITRAMFS := kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
IMAGE/sysupgrade.itb := append-kernel | \
fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-static-with-rootfs | append-metadata
ARTIFACTS := preloader.bin bl31-uboot.fip
ARTIFACT/preloader.bin := mt7981-bl2 spim-nand-ddr3
ARTIFACT/bl31-uboot.fip := mt7981-bl31-uboot xiaomi_mi-router-wr30u
ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
ARTIFACTS += initramfs-factory.ubi
ARTIFACT/initramfs-factory.ubi := append-image-stage initramfs-recovery.itb | ubinize-kernel
endif
endef
TARGET_DEVICES += xiaomi_mi-router-wr30u-ubootmod
define Device/xiaomi_redmi-router-ax6000-stock
DEVICE_VENDOR := Xiaomi
DEVICE_MODEL := Redmi Router AX6000 (stock layout)
DEVICE_DTS := mt7986a-xiaomi-redmi-router-ax6000-stock
DEVICE_DTS_DIR := ../dts
DEVICE_PACKAGES := kmod-leds-ws2812b kmod-mt7915e kmod-mt7986-firmware mt7986-wo-firmware
UBINIZE_OPTS := -E 5
BLOCKSIZE := 128k
PAGESIZE := 2048
ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
ARTIFACTS := initramfs-factory.ubi
ARTIFACT/initramfs-factory.ubi := append-image-stage initramfs-kernel.bin | ubinize-kernel
endif
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
endef
TARGET_DEVICES += xiaomi_redmi-router-ax6000-stock
define Device/xiaomi_redmi-router-ax6000-ubootmod
DEVICE_VENDOR := Xiaomi
DEVICE_MODEL := Redmi Router AX6000 (OpenWrt U-Boot layout)
DEVICE_DTS := mt7986a-xiaomi-redmi-router-ax6000-ubootmod
DEVICE_DTS_DIR := ../dts
DEVICE_PACKAGES := kmod-leds-ws2812b kmod-mt7915e kmod-mt7986-firmware mt7986-wo-firmware
KERNEL_INITRAMFS_SUFFIX := -recovery.itb
IMAGES := sysupgrade.itb
UBINIZE_OPTS := -E 5
BLOCKSIZE := 128k
PAGESIZE := 2048
KERNEL_IN_UBI := 1
UBOOTENV_IN_UBI := 1
KERNEL := kernel-bin | gzip
KERNEL_INITRAMFS := kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
IMAGE/sysupgrade.itb := append-kernel | \
fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-static-with-rootfs | append-metadata
ARTIFACTS := preloader.bin bl31-uboot.fip
ARTIFACT/preloader.bin := mt7986-bl2 spim-nand-ddr4
ARTIFACT/bl31-uboot.fip := mt7986-bl31-uboot xiaomi_redmi-router-ax6000
ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
ARTIFACTS += initramfs-factory.ubi
ARTIFACT/initramfs-factory.ubi := append-image-stage initramfs-recovery.itb | ubinize-kernel
endif
endef
TARGET_DEVICES += xiaomi_redmi-router-ax6000-ubootmod
define Device/yuncore_ax835
DEVICE_VENDOR := YunCore
DEVICE_MODEL := AX835
DEVICE_DTS := mt7981b-yuncore-ax835
DEVICE_DTS_DIR := ../dts
DEVICE_DTS_LOADADDR := 0x47000000
IMAGES := sysupgrade.bin
IMAGE_SIZE := 14336k
SUPPORTED_DEVICES += mediatek,mt7981-spim-nor-rfb
KERNEL := kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
KERNEL_INITRAMFS := kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
IMAGE/sysupgrade.bin := append-kernel | pad-to 128k | append-rootfs | pad-rootfs | check-size | append-metadata
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware
endef
TARGET_DEVICES += yuncore_ax835
define Device/zbtlink_zbt-z8102ax
DEVICE_VENDOR := Zbtlink
DEVICE_MODEL := ZBT-Z8102AX
DEVICE_DTS := mt7981b-zbtlink-zbt-z8102ax
DEVICE_DTS_DIR := ../dts
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware kmod-usb3 kmod-usb-net-qmi-wwan kmod-usb-serial-option
KERNEL_IN_UBI := 1
UBINIZE_OPTS := -E 5
BLOCKSIZE := 128k
PAGESIZE := 2048
IMAGE_SIZE := 65536k
IMAGES += factory.bin
IMAGE/factory.bin := append-ubi | check-size $$(IMAGE_SIZE)
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
endef
TARGET_DEVICES += zbtlink_zbt-z8102ax
define Device/zbtlink_zbt-z8103ax
DEVICE_VENDOR := Zbtlink
DEVICE_MODEL := ZBT-Z8103AX
DEVICE_DTS := mt7981b-zbtlink-zbt-z8103ax
DEVICE_DTS_DIR := ../dts
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware
KERNEL_IN_UBI := 1
UBINIZE_OPTS := -E 5
BLOCKSIZE := 128k
PAGESIZE := 2048
IMAGE_SIZE := 65536k
IMAGES += factory.bin
IMAGE/factory.bin := append-ubi | check-size $$(IMAGE_SIZE)
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
endef
TARGET_DEVICES += zbtlink_zbt-z8103ax
define Device/zyxel_ex5601-t0-stock
DEVICE_VENDOR := Zyxel
DEVICE_MODEL := EX5601-T0
DEVICE_ALT0_VENDOR := Zyxel
DEVICE_ALT0_MODEL := EX5601-T1
DEVICE_ALT1_VENDOR := Zyxel
DEVICE_ALT1_MODEL := T-56
DEVICE_VARIANT := (stock layout)
DEVICE_DTS := mt7986a-zyxel-ex5601-t0-stock
DEVICE_DTS_DIR := ../dts
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7986-firmware mt7986-wo-firmware kmod-usb3
UBINIZE_OPTS := -E 5
BLOCKSIZE := 256k
PAGESIZE := 4096
IMAGE_SIZE := 65536k
KERNEL_IN_UBI := 1
IMAGES += factory.bin
IMAGE/factory.bin := append-ubi | check-size $$$$(IMAGE_SIZE)
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
KERNEL = kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
KERNEL_INITRAMFS = kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd
endef
TARGET_DEVICES += zyxel_ex5601-t0-stock
define Device/zyxel_ex5601-t0-ubootmod
DEVICE_VENDOR := Zyxel
DEVICE_MODEL := EX5601-T0
DEVICE_ALT0_VENDOR := Zyxel
DEVICE_ALT0_MODEL := EX5601-T1
DEVICE_ALT1_VENDOR := Zyxel
DEVICE_ALT1_MODEL := T-56
DEVICE_VARIANT := (OpenWrt U-Boot layout)
DEVICE_DTS := mt7986a-zyxel-ex5601-t0-ubootmod
DEVICE_DTS_DIR := ../dts
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7986-firmware mt7986-wo-firmware kmod-usb3
KERNEL_INITRAMFS_SUFFIX := -recovery.itb
IMAGES := sysupgrade.itb
UBINIZE_OPTS := -E 5
BLOCKSIZE := 256k
PAGESIZE := 4096
KERNEL_IN_UBI := 1
UBOOTENV_IN_UBI := 1
KERNEL := kernel-bin | lzma
KERNEL_INITRAMFS := kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd
IMAGE/sysupgrade.itb := append-kernel | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-static-with-rootfs | append-metadata
ARTIFACTS := preloader.bin bl31-uboot.fip
ARTIFACT/preloader.bin := mt7986-bl2 spim-nand-4k-ddr4
ARTIFACT/bl31-uboot.fip := mt7986-bl31-uboot zyxel_ex5601-t0
ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
ARTIFACTS += initramfs-factory.ubi
ARTIFACT/initramfs-factory.ubi := append-image-stage initramfs-recovery.itb | ubinize-kernel
endif
endef
TARGET_DEVICES += zyxel_ex5601-t0-ubootmod
define Device/zyxel_ex5700-telenor
DEVICE_VENDOR := Zyxel
DEVICE_MODEL := EX5700 (Telenor)
DEVICE_DTS := mt7986a-zyxel-ex5700-telenor
DEVICE_DTS_DIR := ../dts
DEVICE_PACKAGES := kmod-ubootenv-nvram kmod-usb3 kmod-mt7915e kmod-mt7916-firmware kmod-mt7986-firmware mt7986-wo-firmware
UBINIZE_OPTS := -E 5
BLOCKSIZE := 128k
PAGESIZE := 2048
IMAGE_SIZE := 65536k
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
endef
TARGET_DEVICES += zyxel_ex5700-telenor
define Device/zyxel_nwa50ax-pro
DEVICE_VENDOR := Zyxel
DEVICE_MODEL := NWA50AX Pro
DEVICE_DTS := mt7981b-zyxel-nwa50ax-pro
DEVICE_DTS_DIR := ../dts
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware zyxel-bootconfig
DEVICE_DTS_LOADADDR := 0x44000000
UBINIZE_OPTS := -E 5
BLOCKSIZE := 128k
PAGESIZE := 2048
IMAGE_SIZE := 51200k
KERNEL_IN_UBI := 1
IMAGES += factory.bin
IMAGE/factory.bin := append-ubi | check-size $$$$(IMAGE_SIZE) | zyxel-nwa-fit-filogic
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
endef
TARGET_DEVICES += zyxel_nwa50ax-pro
Reference in New Issue View Git Blame Copy Permalink