Merge Official Source

Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>

README.md

@@ -15,7 +15,7 @@ Built firmware images are available for many architectures and come with a packa
 If your device is supported, please follow the **Info** link to see install instructions or consult the support resources listed below.
 
 ## Development
-To build your own firmware you need a GNU/Linux, BSD or MacOSX system (case sensitive filesystem required). Cygwin is unsupported because of the lack of a case sensitive file system.<br/>
+To build your own firmware you need a GNU/Linux, BSD or macOS system (case sensitive filesystem required). Cygwin is unsupported because of the lack of a case sensitive file system.<br/>
 
   ### Requirements
   To build with this project, Ubuntu 20.04 LTS is preferred. And you need use the CPU based on AMD64 architecture, with at least 4GB RAM and 25 GB available disk space. Make sure the __Internet__ is accessible.

package/boot/uboot-mediatek/patches/453-add-nokia_ea0326gmp.patch

@@ -360,7 +360,7 @@
 +serverip=192.168.1.254
 +loadaddr=0x46000000
 +console=earlycon=uart8250,mmio32,0x11002000 console=ttyS0
-+bootargs=root=ubi.block=0,fit root=/dev/fit0 rootwait
++bootargs=root=/dev/fit0 rootwait
 +bootcmd=if pstore check ; then run boot_recovery ; else run boot_ubi ; fi
 +bootconf=config-1
 +bootdelay=0

package/kernel/lantiq/ltq-vdsl-vr11-mei/Makefile

@@ -9,7 +9,7 @@ include $(INCLUDE_DIR)/kernel.mk
 
 PKG_NAME:=ltq-vdsl-vr11-mei
 PKG_VERSION:=1.11.1
-PKG_RELEASE:=2
+PKG_RELEASE:=3
 PKG_BASE_NAME:=dsl_cpe_mei
 
 UGW_VERSION=8.5.2.10

package/kernel/lantiq/ltq-vdsl-vr11-mei/patches/130-support-kernel-6.6.patch

@@ -0,0 +1,35 @@
+--- a/src/drv_mei_cpe_linux.c
++++ b/src/drv_mei_cpe_linux.c
+@@ -2779,7 +2779,11 @@ static int MEI_InitModuleRegCharDev(cons
+             ("Using major number %d" MEI_DRV_CRLF, MAJOR(mei_devt)));
+       }
+ 
++#if LINUX_VERSION_CODE < KERNEL_VERSION(6, 4, 0)
+       mei_class = class_create(THIS_MODULE, devName);
++#else
++      mei_class = class_create(devName);
++#endif
+       if (IS_ERR(mei_class))
+       {
+          PRN_DBG_USR_NL( MEI_DRV,MEI_DRV_PRN_LEVEL_HIGH,
+--- a/src/drv_mei_cpe_api_atm_ptm_intern.c
++++ b/src/drv_mei_cpe_api_atm_ptm_intern.c
+@@ -223,7 +223,7 @@ IFX_int32_t MEI_TcRequest(void *data)
+       pMeiDynCntrl->pDfeX        = NULL;
+       pMeiDynCntrl->pMeiDev      = pMeiDev;
+ 
+-      argsTcRequest.request_type = request_type;
++      argsTcRequest.request_type = (MEI_TC_RequestType_t)request_type;
+       argsTcRequest.is_bonding = MEI_BND_EnableGet(pMeiDynCntrl);
+ 
+       if (MEI_DFEX_ENTITIES == 1 && argsTcRequest.is_bonding == IFX_TRUE)
+@@ -398,7 +398,8 @@ IFX_int32_t MEI_InternalLineTCModeSwitch
+       pMeiDynCntrl->pDfeX        = NULL;
+       pMeiDynCntrl->pMeiDev      = MEIX_Cntrl[nEntity]->MeiDevice[nInstance];
+ 
+-      argsTcRequest.request_type = bPowerUp ? MEI_TC_REQUEST_PTM : MEI_TC_REQUEST_OFF;
++      argsTcRequest.request_type = bPowerUp ? (MEI_TC_RequestType_t)MEI_TC_REQUEST_PTM :
++                                              (MEI_TC_RequestType_t)MEI_TC_REQUEST_OFF;
+       argsTcRequest.is_bonding   = pMeiDynCntrl->pMeiDev->bLastBondingStatus;
+ 
+       retVal = MEI_InternalTcRequest(pMeiDynCntrl, &argsTcRequest);

package/kernel/lantiq/ltq-vdsl-vr11/Makefile

@@ -9,7 +9,7 @@ include $(INCLUDE_DIR)/kernel.mk
 
 PKG_NAME:=ltq-vdsl-vr11
 PKG_VERSION:=4.23.1
-PKG_RELEASE:=2
+PKG_RELEASE:=3
 PKG_BASE_NAME:=dsl_cpe_api
 
 UGW_VERSION=8.5.2.10

package/kernel/lantiq/ltq-vdsl-vr11/patches/130-support-kernel-6.6.patch

@@ -0,0 +1,97 @@
+--- a/src/common/drv_dsl_cpe_os_linux.c
++++ b/src/common/drv_dsl_cpe_os_linux.c
+@@ -431,7 +431,11 @@ static int DSL_DRV_DevNodeInit(DSL_void_
+    }
+ 
+    /* create a device class used for createing /dev/ entries */
++#if LINUX_VERSION_CODE < KERNEL_VERSION(6, 4, 0)
+    dsl_class = class_create(THIS_MODULE, DRV_DSL_CPE_API_DEV_NAME);
++#else
++   dsl_class = class_create(DRV_DSL_CPE_API_DEV_NAME);
++#endif
+    if (IS_ERR(dsl_class)) {
+       DSL_DEBUG(DSL_DBG_ERR,
+          (DSL_NULL, SYS_DBG_ERR""DSL_DRV_CRLF DSL_DRV_CRLF
+--- a/src/common/drv_dsl_cpe_api.c
++++ b/src/common/drv_dsl_cpe_api.c
+@@ -1370,7 +1370,8 @@ DSL_boolean_t DSL_DRV_BondingEnableCheck
+       nDslMode = DSL_DRV_VRX_DslModeIndexGet(pContext);
+ 
+       DSL_CHECK_DSLMODE(nDslMode);
+-      DSL_CHECK_ERR_CODE();
++      if (nErrCode != DSL_SUCCESS)
++         return bPafEnable;
+ 
+       /* Bonding is always enabled for both lines/devices together so using the
+          configuration from the current line/device is ok. */
+@@ -3886,7 +3887,7 @@ DSL_Error_t DSL_DRV_RetxStatisticsGet(
+ 
+    DSL_CHECK_POINTER(pContext, pData);
+    DSL_CHECK_ERR_CODE();
+-   DSL_CHECK_DIRECTION(pData->nDirection);
++   DSL_CHECK_ATU_DIRECTION(pData->nDirection);
+    DSL_CHECK_ERR_CODE();
+ 
+    DSL_DEBUG(DSL_DBG_MSG,
+--- a/src/device/drv_dsl_cpe_device_vrx.c
++++ b/src/device/drv_dsl_cpe_device_vrx.c
+@@ -2760,7 +2760,7 @@ static DSL_Error_t DSL_DRV_VRX_ChannelSt
+    DSL_CHECK_CHANNEL_RANGE(nChannel);
+    DSL_CHECK_ERR_CODE();
+ 
+-   DSL_CHECK_ATU_DIRECTION(nDirection);
++   DSL_CHECK_DIRECTION(nDirection);
+    DSL_CHECK_ERR_CODE();
+ 
+    DSL_DEBUG(DSL_DBG_MSG,
+@@ -2807,8 +2807,8 @@ static DSL_Error_t DSL_DRV_VRX_ChannelSt
+       if (nVerCheck >= DSL_VERSION_EQUAL)
+       {
+          bRocEnable = nDirection == DSL_UPSTREAM ?
+-                     (DSL_boolean_t)sAckLs.FUS.ROCstatus_us :
+-                     (DSL_boolean_t)sAckLs.FDS.ROCstatus_ds;
++                     (DSL_FeatureSupport_t)sAckLs.FUS.ROCstatus_us :
++                     (DSL_FeatureSupport_t)sAckLs.FDS.ROCstatus_ds;
+ 
+          DSL_CTX_WRITE_SCALAR(
+             pContext, nErrCode, lineFeatureDataSts[nDirection].bRocEnable,
+@@ -4885,7 +4885,7 @@ DSL_Error_t DSL_DRV_DEV_FwDownload(
+ 
+          /* Set VRX device FW mode*/
+          fwModeSelect.firmwareFeatures.nPlatformId = nFwFeatures.nPlatformId;
+-         fwModeSelect.firmwareFeatures.eFirmwareXdslModes = nFwFeatures.nFirmwareXdslModes;
++         fwModeSelect.firmwareFeatures.eFirmwareXdslModes = (IOCTL_MEI_firmwareXdslMode_t)nFwFeatures.nFirmwareXdslModes;
+ 
+          if( DSL_DRV_VRX_InternalFwModeCtrlSet((MEI_DYN_CNTRL_T*)dev, &fwModeSelect) != 0 )
+          {
+@@ -7420,7 +7420,7 @@ DSL_Error_t DSL_DRV_VRX_ChannelStatusGet
+ {
+    DSL_Error_t nErrCode = DSL_SUCCESS;
+ 
+-   DSL_CHECK_ATU_DIRECTION(nDirection);
++   DSL_CHECK_DIRECTION(nDirection);
+    DSL_CHECK_ERR_CODE();
+ 
+    DSL_CTX_READ_SCALAR(pContext, nErrCode,
+--- a/src/bnd/drv_dsl_cpe_api_bnd_vrx.c
++++ b/src/bnd/drv_dsl_cpe_api_bnd_vrx.c
+@@ -480,7 +480,8 @@ DSL_Error_t DSL_DRV_BND_DEV_PafBndStatus
+    else
+    {
+       pData->nRemotePafSupported =
+-         pafHsStatus.bPafEnable ? DSL_BND_ENABLE_ON : DSL_BND_ENABLE_OFF;
++         pafHsStatus.bPafEnable ? (DSL_BND_Supported_t)DSL_BND_ENABLE_ON :
++                                  (DSL_BND_Supported_t)DSL_BND_ENABLE_OFF;
+    }
+ 
+    DSL_DEBUG(DSL_DBG_MSG, (pContext,
+@@ -517,7 +518,8 @@ DSL_Error_t DSL_DRV_BND_DEV_ImapBndStatu
+    else
+    {
+       pData->nRemoteImapSupported =
+-         imapHsStatus.bImapEnable ? DSL_BND_ENABLE_ON : DSL_BND_ENABLE_OFF;
++         imapHsStatus.bImapEnable ? (DSL_BND_Supported_t)DSL_BND_ENABLE_ON :
++                                    (DSL_BND_Supported_t)DSL_BND_ENABLE_OFF;
+    }
+ 
+    DSL_DEBUG(DSL_DBG_MSG, (pContext,

package/kernel/mt76/Makefile

@@ -1,7 +1,7 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=mt76
-PKG_RELEASE=1
+PKG_RELEASE=2
 
 PKG_LICENSE:=GPLv2
 PKG_LICENSE_FILES:=

package/kernel/mt76/patches/101-wifi-mt76-mt7603-add-debugfs-attr-for-disabling-fram.patch

@@ -0,0 +1,81 @@
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
+Date: Mon, 25 Mar 2024 18:54:02 +0100
+Subject: [PATCH] wifi: mt76: mt7603: add debugfs attr for disabling frames
+ buffering
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+MT7603EN and MT7628AN were reported by multiple users to be unstable
+under high traffic. Transmission of packets could stop for seconds often
+leading to disconnections.
+
+Long research & debugging revelaed a close relation between MCU
+interrupts of type PKT_TYPE_TXS and slowdowns / stalls. That led to
+questioning frames buffering feature.
+
+It turns out that disabling SKBs loopback code makes mt7603 devices much
+more stable under load. There are still some traffic hiccups but those
+happen like once every an hour and end up in recovery in most cases.
+
+Add a debugfs option for disabling frames buffering so users can give it
+a try. If this solution yields a success we can make this feature
+disabled by default.
+
+This change was successfully tested using 2 GHz AP interface on:
+1. Netgear R6220 - MT7621ST (SoC) + MT7603EN (WiFi) + MT7612EN (WiFi)
+2. Xiaomi Mi Router 4C - MT7628AN (Wi-Fi SoC)
+
+Link: https://lore.kernel.org/linux-wireless/7c96d5ee-86c1-8068-1b58-40db6087a24f@gmail.com/
+Closes: https://github.com/openwrt/mt76/issues/865
+Fixes: c8846e101502 ("mt76: add driver for MT7603E and MT7628/7688")
+Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
+---
+ mt7603/debugfs.c | 2 ++
+ mt7603/dma.c     | 3 +++
+ mt7603/init.c    | 1 +
+ mt7603/mt7603.h  | 2 ++
+ 4 files changed, 8 insertions(+)
+
+--- a/mt7603/debugfs.c
++++ b/mt7603/debugfs.c
+@@ -115,4 +115,6 @@ void mt7603_init_debugfs(struct mt7603_d
+ 			    &dev->sensitivity_limit);
+ 	debugfs_create_bool("dynamic_sensitivity", 0600, dir,
+ 			    &dev->dynamic_sensitivity);
++	debugfs_create_bool("frames_buffering", 0600, dir,
++			    &dev->frames_buffering);
+ }
+--- a/mt7603/dma.c
++++ b/mt7603/dma.c
+@@ -27,6 +27,9 @@ mt7603_rx_loopback_skb(struct mt7603_dev
+ 	u32 val;
+ 	u8 tid = 0;
+ 
++	if (!dev->frames_buffering)
++		goto free;
++
+ 	if (skb->len < MT_TXD_SIZE + sizeof(struct ieee80211_hdr))
+ 		goto free;
+ 
+--- a/mt7603/init.c
++++ b/mt7603/init.c
+@@ -517,6 +517,7 @@ int mt7603_register_device(struct mt7603
+ 	dev->slottime = 9;
+ 	dev->sensitivity_limit = 28;
+ 	dev->dynamic_sensitivity = true;
++	dev->frames_buffering = true;
+ 
+ 	ret = mt7603_init_hardware(dev);
+ 	if (ret)
+--- a/mt7603/mt7603.h
++++ b/mt7603/mt7603.h
+@@ -155,6 +155,8 @@ struct mt7603_dev {
+ 	u32 reset_test;
+ 
+ 	unsigned int reset_cause[__RESET_CAUSE_MAX];
++
++	bool frames_buffering;
+ };
+ 
+ extern const struct mt76_driver_ops mt7603_drv_ops;

package/kernel/qca-nss-dp/Makefile

@@ -39,7 +39,7 @@ EXTRA_CFLAGS+= \
 
 NSS_DP_HAL_DIR:=$(PKG_BUILD_DIR)/hal
 define Build/Configure
-	$(LN) $(NSS_DP_HAL_DIR)/soc_ops/$(CONFIG_TARGET_SUBTARGET)/nss_$(CONFIG_TARGET_SUBTARGET).h \
+	$(CP) $(NSS_DP_HAL_DIR)/soc_ops/$(CONFIG_TARGET_SUBTARGET)/nss_$(CONFIG_TARGET_SUBTARGET).h \
 		$(PKG_BUILD_DIR)/exports/nss_dp_arch.h
 endef
 

package/kernel/qca-ssdk/Makefile

@@ -10,6 +10,7 @@ PKG_SOURCE_VERSION:=23a5aa4a4d5834da7a07efb58baebfbee91786b0
 PKG_MIRROR_HASH:=2310cdad1ebc424c534aa3a2c71e72e0ab3635295653a88d17dfc64c402cd151
 
 PKG_FLAGS:=nonshared
+PKG_BUILD_PARALLEL:=1
 PKG_BUILD_FLAGS:=no-lto
 
 include $(INCLUDE_DIR)/kernel.mk
@@ -21,7 +22,7 @@ define KernelPackage/qca-ssdk
   SUBMENU:=Network Devices
   TITLE:=Qualcom SSDK switch driver
   DEPENDS:=@(TARGET_qualcommax)
-  FILES:=$(PKG_BUILD_DIR)/build/bin/qca-ssdk.ko
+  FILES:=$(PKG_BUILD_DIR)/qca-ssdk.ko
   AUTOLOAD:=$(call AutoLoad,30,qca-ssdk)
 endef
 
@@ -31,7 +32,7 @@ endef
 
 GCC_VERSION=$(shell echo "$(CONFIG_GCC_VERSION)" | sed 's/[^0-9.]*\([0-9.]*\).*/\1/')
 
-LNX_CONFIG_OPTS = LNX_MAKEOPTS='$(KERNEL_MAKEOPTS)' MODULE_TYPE=KSLIB modules
+LNX_CONFIG_OPTS = LNX_MAKEOPTS='$(KERNEL_MAKEOPTS)' PRJ_PATH=$(PKG_BUILD_DIR) MODULE_TYPE=KSLIB modules
 
 MAKE_FLAGS+= \
 	TARGET_NAME=$(CONFIG_TARGET_NAME) \
@@ -42,7 +43,7 @@ MAKE_FLAGS+= \
 	ARCH=$(LINUX_KARCH) \
 	TARGET_SUFFIX=$(CONFIG_TARGET_SUFFIX) \
 	GCC_VERSION=$(GCC_VERSION) \
-	EXTRA_CFLAGS=-fno-stack-protector -I$(STAGING_DIR)/usr/include \
+	EXTRA_CFLAGS="-fno-stack-protector -I$(STAGING_DIR)/usr/include" \
 	SoC=$(CONFIG_TARGET_SUBTARGET) \
 	PTP_FEATURE=disable SWCONFIG_FEATURE=disable \
 	ISISC_ENABLE=disable IN_QCA803X_PHY=FALSE \
@@ -57,6 +58,11 @@ ifeq ($(CONFIG_TARGET_SUBTARGET), "ipq60xx")
     MAKE_FLAGS+= CHIP_TYPE=CPPE
 endif
 
+
+define Build/Compile
+	+$(MAKE) $(PKG_JOBS) $(MAKE_FLAGS) -C $(PKG_BUILD_DIR) $(LNX_CONFIG_OPTS)
+endef
+
 define Build/InstallDev
 	$(INSTALL_DIR) $(1)/usr/include/qca-ssdk
 	$(INSTALL_DIR) $(1)/usr/include/qca-ssdk/api

package/kernel/qca-ssdk/patches/200-allow-parallel-build.patch

@@ -0,0 +1,50 @@
+--- a/Makefile
++++ b/Makefile
+@@ -1,17 +1,19 @@
+-include ./config
+-
+ ifndef PRJ_PATH
+   PRJ_PATH=$(shell pwd)
+ endif
+ export PRJ_PATH
+ 
+-include ./make/config.mk
+-include ./make/tools.mk
+-include ./make/$(OS)_opt.mk
++include $(PRJ_PATH)/config
++
++include $(PRJ_PATH)/make/config.mk
++include $(PRJ_PATH)/make/tools.mk
++include $(PRJ_PATH)/make/$(OS)_opt.mk
+ 
+ SUB_DIR=$(patsubst %/, %, $(dir $(wildcard src/*/Makefile)))
+ SUB_LIB=$(subst src/, , $(SUB_DIR))
+ 
++include $(PRJ_PATH)/Makefile.modules
++
+ ####################################################################
+ # 			SSDK-Style Makefile
+ ####################################################################
+@@ -27,11 +29,7 @@ all: $(BIN_DIR) kslib
+ # 			LNX Modules-Style Makefile
+ ####################################################################
+ modules: $(BIN_DIR) kslib_c
+-	mkdir -p ./temp/;cp * ./temp -a;cd ./temp;cp ../Makefile.modules ./Makefile;
+-	make -C $(SYS_PATH) M=$(PRJ_PATH)/temp $(LNX_MAKEOPTS) modules
+-	cp $(PRJ_PATH)/temp/Module.symvers $(PRJ_PATH)/Module.symvers;
+-	cp temp/*.ko build/bin;
+-	rm -Rf ./temp/*.o ./temp/*.ko ./temp/*.a
++	@$(MAKE) -C $(SYS_PATH) M=$(PRJ_PATH) $(LNX_MAKEOPTS) modules
+ 	@echo "---Build [SSDK-$(VERSION)] at $(BUILD_DATE) finished."
+ 
+ kslib_c:
+--- a/make/linux_opt.mk
++++ b/make/linux_opt.mk
+@@ -777,6 +777,6 @@ LOCAL_CFLAGS += $(CPU_CFLAG) -D"KBUILD_M
+ ####################################################################
+ # 			cflags for LNX Modules-Style Makefile
+ ####################################################################
+-LNX_LOCAL_CFLAGS += $(MODULE_INC) $(MODULE_CFLAG) ${EXTRA_INC} -DFALLTHROUGH
++LNX_LOCAL_CFLAGS = $(MODULE_INC) $(MODULE_CFLAG) ${EXTRA_INC} -DFALLTHROUGH
+ export LNX_LOCAL_CFLAGS
+ 

package/system/procd/Makefile

@@ -12,9 +12,9 @@ PKG_RELEASE:=1
 
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL=$(PROJECT_GIT)/project/procd.git
-PKG_MIRROR_HASH:=b324cca5b9870c73f3b1c21547ca061acef6e7acb2488244c2f5be129d3a2e6c
-PKG_SOURCE_DATE:=2024-03-25
-PKG_SOURCE_VERSION:=ca8c30208d5e1aaa2c0e3f732c4c9944735e9850
+PKG_MIRROR_HASH:=2ba058d25c7489e9d38d674878087aa5d36ffd9fe4f83bee6c88e2a0c340c757
+PKG_SOURCE_DATE:=2024-03-30
+PKG_SOURCE_VERSION:=946552a7b598a0b88db6101e864679554ec4f221
 CMAKE_INSTALL:=1
 
 PKG_LICENSE:=GPL-2.0

target/linux/generic/backport-6.1/734-v6.8-net-phy-bcm54612e-add-suspend-resume.patch

@@ -16,7 +16,7 @@ Signed-off-by: David S. Miller <davem@davemloft.net>
 
 --- a/drivers/net/phy/broadcom.c
 +++ b/drivers/net/phy/broadcom.c
-@@ -941,6 +941,8 @@ static struct phy_driver broadcom_driver
+@@ -942,6 +942,8 @@ static struct phy_driver broadcom_driver
  	.config_intr	= bcm_phy_config_intr,
  	.handle_interrupt = bcm_phy_handle_interrupt,
  	.link_change_notify	= bcm54xx_link_change_notify,

target/linux/generic/config-6.6

@@ -5377,6 +5377,7 @@ CONFIG_RCU_TORTURE_TEST_SLOW_INIT_DELAY=3
 # CONFIG_REGULATOR_PV88080 is not set
 # CONFIG_REGULATOR_PV88090 is not set
 # CONFIG_REGULATOR_PWM is not set
+# CONFIG_REGULATOR_QCOM_REFGEN is not set
 # CONFIG_REGULATOR_RAA215300 is not set
 # CONFIG_REGULATOR_RASPBERRYPI_TOUCHSCREEN_ATTINY is not set
 # CONFIG_REGULATOR_RT4801 is not set
@@ -7249,6 +7250,7 @@ CONFIG_TTY=y
 # CONFIG_TYPEC_TCPM is not set
 # CONFIG_TYPEC_UCSI is not set
 # CONFIG_TYPHOON is not set
+# CONFIG_UACCE is not set
 # CONFIG_UACCESS_WITH_MEMCPY is not set
 # CONFIG_UBIFS_ATIME_SUPPORT is not set
 # CONFIG_UBIFS_FS_ADVANCED_COMPR is not set

target/linux/ipq40xx/Makefile

@@ -9,6 +9,7 @@ CPU_SUBTYPE:=neon-vfpv4
 SUBTARGETS:=generic chromium mikrotik
 
 KERNEL_PATCHVER:=6.1
+KERNEL_TESTING_PATCHVER:=6.6
 
 KERNELNAME:=zImage Image dtbs
 

target/linux/ipq40xx/config-6.1

@@ -199,8 +199,7 @@ CONFIG_GPIO_CDEV=y
 CONFIG_GPIO_WATCHDOG=y
 CONFIG_GPIO_WATCHDOG_ARCH_INITCALL=y
 CONFIG_GRO_CELLS=y
-# CONFIG_HARDEN_BRANCH_HISTORY is not set
-# CONFIG_HARDEN_BRANCH_PREDICTOR is not set
+CONFIG_HARDEN_BRANCH_PREDICTOR=y
 CONFIG_HARDIRQS_SW_RESEND=y
 CONFIG_HAS_DMA=y
 CONFIG_HAS_IOMEM=y

target/linux/ipq40xx/config-6.6

@@ -0,0 +1,554 @@
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_APQ_GCC_8084 is not set
+# CONFIG_APQ_MMCC_8084 is not set
+CONFIG_ARCH_32BIT_OFF_T=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_IPQ40XX=y
+CONFIG_ARCH_KEEP_MEMBLOCK=y
+# CONFIG_ARCH_MDM9615 is not set
+CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
+# CONFIG_ARCH_MSM8909 is not set
+# CONFIG_ARCH_MSM8916 is not set
+# CONFIG_ARCH_MSM8960 is not set
+# CONFIG_ARCH_MSM8974 is not set
+# CONFIG_ARCH_MSM8X60 is not set
+CONFIG_ARCH_MULTIPLATFORM=y
+CONFIG_ARCH_MULTI_V6_V7=y
+CONFIG_ARCH_MULTI_V7=y
+CONFIG_ARCH_NR_GPIO=0
+CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y
+CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT=y
+CONFIG_ARCH_QCOM=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_ARM=y
+CONFIG_ARM_AMBA=y
+CONFIG_ARM_APPENDED_DTB=y
+CONFIG_ARM_ARCH_TIMER=y
+CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y
+# CONFIG_ARM_ATAG_DTB_COMPAT is not set
+CONFIG_ARM_CPUIDLE=y
+# CONFIG_ARM_CPU_TOPOLOGY is not set
+CONFIG_ARM_GIC=y
+CONFIG_ARM_HAS_GROUP_RELOCS=y
+CONFIG_ARM_L1_CACHE_SHIFT=6
+CONFIG_ARM_L1_CACHE_SHIFT_6=y
+CONFIG_ARM_PATCH_IDIV=y
+CONFIG_ARM_PATCH_PHYS_VIRT=y
+# CONFIG_ARM_QCOM_CPUFREQ_HW is not set
+# CONFIG_ARM_QCOM_CPUFREQ_NVMEM is not set
+# CONFIG_ARM_QCOM_SPM_CPUIDLE is not set
+# CONFIG_ARM_SMMU is not set
+CONFIG_ARM_THUMB=y
+CONFIG_ARM_UNWIND=y
+CONFIG_ARM_VIRT_EXT=y
+CONFIG_AT803X_PHY=y
+CONFIG_AUTO_ZRELADDR=y
+CONFIG_BCH=y
+CONFIG_BINFMT_FLAT_ARGVP_ENVP_ON_STACK=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_MQ_PCI=y
+CONFIG_BOUNCE=y
+# CONFIG_CACHE_L2X0 is not set
+CONFIG_CC_HAVE_STACKPROTECTOR_TLS=y
+CONFIG_CC_IMPLICIT_FALLTHROUGH="-Wimplicit-fallthrough=5"
+CONFIG_CC_NO_ARRAY_BOUNDS=y
+CONFIG_CLKSRC_QCOM=y
+CONFIG_CLONE_BACKWARDS=y
+CONFIG_CMDLINE_PARTITION=y
+CONFIG_COMMON_CLK=y
+CONFIG_COMMON_CLK_QCOM=y
+CONFIG_COMPACT_UNEVICTABLE_DEFAULT=1
+CONFIG_COMPAT_32BIT_TIME=y
+CONFIG_CONTEXT_TRACKING=y
+CONFIG_CONTEXT_TRACKING_IDLE=y
+CONFIG_CPUFREQ_DT=y
+CONFIG_CPUFREQ_DT_PLATDEV=y
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+CONFIG_CPU_FREQ=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+CONFIG_CPU_FREQ_GOV_ATTR_SET=y
+CONFIG_CPU_FREQ_GOV_COMMON=y
+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
+# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
+CONFIG_CPU_FREQ_STAT=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_GOV_LADDER=y
+CONFIG_CPU_IDLE_GOV_MENU=y
+CONFIG_CPU_IDLE_MULTIPLE_DRIVERS=y
+CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_CPU_PABRT_V7=y
+CONFIG_CPU_PM=y
+CONFIG_CPU_RMAP=y
+CONFIG_CPU_SPECTRE=y
+CONFIG_CPU_THERMAL=y
+CONFIG_CPU_THUMB_CAPABLE=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_V7=y
+CONFIG_CRC16=y
+# CONFIG_CRC32_SARWATE is not set
+CONFIG_CRC32_SLICEBY8=y
+CONFIG_CRC8=y
+CONFIG_CRYPTO_AES_ARM=y
+CONFIG_CRYPTO_AES_ARM_BS=y
+CONFIG_CRYPTO_ARCH_HAVE_LIB_BLAKE2S=y
+CONFIG_CRYPTO_BLAKE2S_ARM=y
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_CRYPTD=y
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_DEV_QCE=y
+# CONFIG_CRYPTO_DEV_QCE_ENABLE_AEAD is not set
+# CONFIG_CRYPTO_DEV_QCE_ENABLE_ALL is not set
+# CONFIG_CRYPTO_DEV_QCE_ENABLE_SHA is not set
+CONFIG_CRYPTO_DEV_QCE_ENABLE_SKCIPHER=y
+CONFIG_CRYPTO_DEV_QCE_SKCIPHER=y
+CONFIG_CRYPTO_DEV_QCE_SW_MAX_LEN=512
+CONFIG_CRYPTO_DEV_QCOM_RNG=y
+CONFIG_CRYPTO_DRBG=y
+CONFIG_CRYPTO_DRBG_HMAC=y
+CONFIG_CRYPTO_DRBG_MENU=y
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_HASH_INFO=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_HW=y
+CONFIG_CRYPTO_JITTERENTROPY=y
+CONFIG_CRYPTO_LIB_DES=y
+CONFIG_CRYPTO_LIB_SHA1=y
+CONFIG_CRYPTO_LIB_SHA256=y
+CONFIG_CRYPTO_LIB_UTILS=y
+CONFIG_CRYPTO_LZO=y
+CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_RNG_DEFAULT=y
+CONFIG_CRYPTO_SEQIV=y
+CONFIG_CRYPTO_SHA1=y
+CONFIG_CRYPTO_SHA256=y
+CONFIG_CRYPTO_SHA256_ARM=y
+CONFIG_CRYPTO_SHA512=y
+CONFIG_CRYPTO_SIMD=y
+CONFIG_CRYPTO_XTS=y
+CONFIG_CRYPTO_ZSTD=y
+CONFIG_CURRENT_POINTER_IN_TPIDRURO=y
+CONFIG_DCACHE_WORD_ACCESS=y
+CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S"
+CONFIG_DEBUG_MISC=y
+CONFIG_DMADEVICES=y
+CONFIG_DMA_ENGINE=y
+CONFIG_DMA_OF=y
+CONFIG_DMA_OPS=y
+CONFIG_DMA_SHARED_BUFFER=y
+CONFIG_DMA_VIRTUAL_CHANNELS=y
+CONFIG_DTC=y
+CONFIG_DT_IDLE_STATES=y
+CONFIG_EDAC_ATOMIC_SCRUB=y
+CONFIG_EDAC_SUPPORT=y
+CONFIG_EEPROM_AT24=y
+CONFIG_EXCLUSIVE_SYSTEM_RAM=y
+CONFIG_EXTCON=y
+CONFIG_FIXED_PHY=y
+CONFIG_FIX_EARLYCON_MEM=y
+CONFIG_FWNODE_MDIO=y
+CONFIG_FW_LOADER_PAGED_BUF=y
+CONFIG_FW_LOADER_SYSFS=y
+CONFIG_GCC11_NO_ARRAY_BOUNDS=y
+CONFIG_GENERIC_ALLOCATOR=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
+CONFIG_GENERIC_CPU_AUTOPROBE=y
+CONFIG_GENERIC_CPU_VULNERABILITIES=y
+CONFIG_GENERIC_EARLY_IOREMAP=y
+CONFIG_GENERIC_GETTIMEOFDAY=y
+CONFIG_GENERIC_IDLE_POLL_SETUP=y
+CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
+CONFIG_GENERIC_IRQ_MULTI_HANDLER=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
+CONFIG_GENERIC_LIB_DEVMEM_IS_ALLOWED=y
+CONFIG_GENERIC_MSI_IRQ=y
+CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
+CONFIG_GENERIC_PCI_IOMAP=y
+CONFIG_GENERIC_PHY=y
+CONFIG_GENERIC_PINCONF=y
+CONFIG_GENERIC_PINCTRL_GROUPS=y
+CONFIG_GENERIC_PINMUX_FUNCTIONS=y
+CONFIG_GENERIC_SCHED_CLOCK=y
+CONFIG_GENERIC_SMP_IDLE_THREAD=y
+CONFIG_GENERIC_STRNCPY_FROM_USER=y
+CONFIG_GENERIC_STRNLEN_USER=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_VDSO_32=y
+CONFIG_GPIOLIB_IRQCHIP=y
+CONFIG_GPIO_74X164=y
+CONFIG_GPIO_CDEV=y
+CONFIG_GPIO_WATCHDOG=y
+CONFIG_GPIO_WATCHDOG_ARCH_INITCALL=y
+CONFIG_GRO_CELLS=y
+# CONFIG_HARDEN_BRANCH_HISTORY is not set
+# CONFIG_HARDEN_BRANCH_PREDICTOR is not set
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_HAS_DMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT_MAP=y
+CONFIG_HAVE_SMP=y
+CONFIG_HIGHMEM=y
+# CONFIG_HIGHPTE is not set
+CONFIG_HWSPINLOCK=y
+CONFIG_HWSPINLOCK_QCOM=y
+CONFIG_HW_RANDOM=y
+CONFIG_HW_RANDOM_OPTEE=y
+CONFIG_HZ_FIXED=0
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+# CONFIG_I2C_QCOM_CCI is not set
+CONFIG_I2C_QUP=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_IOMMU_DEBUGFS is not set
+# CONFIG_IOMMU_IO_PGTABLE_ARMV7S is not set
+# CONFIG_IOMMU_IO_PGTABLE_LPAE is not set
+CONFIG_IOMMU_SUPPORT=y
+# CONFIG_IOMMUFD is not set
+# CONFIG_IPQ_APSS_PLL is not set
+CONFIG_IPQ_GCC_4019=y
+# CONFIG_IPQ_GCC_6018 is not set
+# CONFIG_IPQ_GCC_806X is not set
+# CONFIG_IPQ_GCC_8074 is not set
+# CONFIG_IPQ_GCC_9574 is not set
+# CONFIG_IPQ_LCC_806X is not set
+CONFIG_IRQCHIP=y
+CONFIG_IRQSTACKS=y
+CONFIG_IRQ_DOMAIN=y
+CONFIG_IRQ_DOMAIN_HIERARCHY=y
+CONFIG_IRQ_FASTEOI_HIERARCHY_HANDLERS=y
+CONFIG_IRQ_FORCED_THREADING=y
+CONFIG_IRQ_WORK=y
+CONFIG_KMAP_LOCAL=y
+CONFIG_KMAP_LOCAL_NON_LINEAR_PTE_ARRAY=y
+# CONFIG_KPSS_XCC is not set
+# CONFIG_KRAITCC is not set
+CONFIG_LED_TRIGGER_PHY=y
+CONFIG_LEDS_LP5523=y
+CONFIG_LEDS_LP5562=y
+CONFIG_LEDS_LP55XX_COMMON=y
+CONFIG_LEDS_TLC591XX=y
+CONFIG_LIBFDT=y
+CONFIG_LOCK_DEBUGGING_SUPPORT=y
+CONFIG_LOCK_SPIN_ON_OWNER=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_MDIO_BITBANG=y
+CONFIG_MDIO_BUS=y
+CONFIG_MDIO_DEVICE=y
+CONFIG_MDIO_DEVRES=y
+CONFIG_MDIO_GPIO=y
+CONFIG_MDIO_IPQ4019=y
+# CONFIG_MDM_GCC_9615 is not set
+# CONFIG_MDM_LCC_9615 is not set
+CONFIG_MEMFD_CREATE=y
+# CONFIG_MFD_HI6421_SPMI is not set
+# CONFIG_MFD_QCOM_RPM is not set
+# CONFIG_MFD_SPMI_PMIC is not set
+CONFIG_MFD_SYSCON=y
+CONFIG_MIGHT_HAVE_CACHE_L2X0=y
+CONFIG_MIGRATION=y
+CONFIG_MMC=y
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_CQHCI=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_IO_ACCESSORS=y
+CONFIG_MMC_SDHCI_MSM=y
+# CONFIG_MMC_SDHCI_PCI is not set
+CONFIG_MMC_SDHCI_PLTFM=y
+CONFIG_MODULES_USE_ELF_REL=y
+# CONFIG_MSM_GCC_8660 is not set
+# CONFIG_MSM_GCC_8909 is not set
+# CONFIG_MSM_GCC_8916 is not set
+# CONFIG_MSM_GCC_8939 is not set
+# CONFIG_MSM_GCC_8960 is not set
+# CONFIG_MSM_GCC_8974 is not set
+# CONFIG_MSM_GCC_8976 is not set
+# CONFIG_MSM_GCC_8994 is not set
+# CONFIG_MSM_GCC_8996 is not set
+# CONFIG_MSM_GCC_8998 is not set
+# CONFIG_MSM_GPUCC_8998 is not set
+# CONFIG_MSM_LCC_8960 is not set
+# CONFIG_MSM_MMCC_8960 is not set
+# CONFIG_MSM_MMCC_8974 is not set
+# CONFIG_MSM_MMCC_8996 is not set
+# CONFIG_MSM_MMCC_8998 is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_NAND_CORE=y
+CONFIG_MTD_NAND_ECC=y
+CONFIG_MTD_NAND_ECC_SW_BCH=y
+CONFIG_MTD_NAND_ECC_SW_HAMMING=y
+CONFIG_MTD_NAND_QCOM=y
+# CONFIG_MTD_QCOMSMEM_PARTS is not set
+CONFIG_MTD_RAW_NAND=y
+CONFIG_MTD_SPI_NAND=y
+CONFIG_MTD_SPI_NOR=y
+CONFIG_MTD_SPLIT_FIRMWARE=y
+CONFIG_MTD_SPLIT_FIT_FW=y
+CONFIG_MTD_SPLIT_WRGG_FW=y
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_BEB_LIMIT=20
+CONFIG_MTD_UBI_BLOCK=y
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MUTEX_SPIN_ON_OWNER=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_NEON=y
+CONFIG_NET_DEVLINK=y
+CONFIG_NET_DSA=y
+CONFIG_NET_DSA_QCA8K_IPQ4019=y
+CONFIG_NET_DSA_TAG_OOB=y
+CONFIG_NET_FLOW_LIMIT=y
+CONFIG_NET_PTP_CLASSIFY=y
+CONFIG_NET_SELFTESTS=y
+CONFIG_NET_SWITCHDEV=y
+CONFIG_NLS=y
+CONFIG_NO_HZ=y
+CONFIG_NO_HZ_COMMON=y
+CONFIG_NO_HZ_IDLE=y
+CONFIG_NR_CPUS=4
+CONFIG_NVMEM=y
+CONFIG_NVMEM_QCOM_QFPROM=y
+# CONFIG_NVMEM_QCOM_SEC_QFPROM is not set
+# CONFIG_NVMEM_SPMI_SDAM is not set
+CONFIG_NVMEM_SYSFS=y
+CONFIG_OF=y
+CONFIG_OF_ADDRESS=y
+CONFIG_OF_EARLY_FLATTREE=y
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_GPIO=y
+CONFIG_OF_IRQ=y
+CONFIG_OF_KOBJ=y
+CONFIG_OF_MDIO=y
+CONFIG_OLD_SIGACTION=y
+CONFIG_OLD_SIGSUSPEND3=y
+CONFIG_OPTEE=y
+CONFIG_PADATA=y
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PAGE_POOL=y
+CONFIG_PAGE_SIZE_LESS_THAN_256KB=y
+CONFIG_PAGE_SIZE_LESS_THAN_64KB=y
+CONFIG_PCI=y
+CONFIG_PCIEAER=y
+CONFIG_PCIEPORTBUS=y
+CONFIG_PCIE_DW=y
+CONFIG_PCIE_DW_HOST=y
+CONFIG_PCIE_QCOM=y
+CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_DOMAINS_GENERIC=y
+CONFIG_PCI_MSI=y
+CONFIG_PCI_MSI_IRQ_DOMAIN=y
+CONFIG_PERF_USE_VMALLOC=y
+CONFIG_PGTABLE_LEVELS=2
+CONFIG_PHYLIB=y
+CONFIG_PHYLINK=y
+# CONFIG_PHY_QCOM_APQ8064_SATA is not set
+# CONFIG_PHY_QCOM_EDP is not set
+# CONFIG_PHY_QCOM_EUSB2_REPEATER is not set
+CONFIG_PHY_QCOM_IPQ4019_USB=y
+# CONFIG_PHY_QCOM_IPQ806X_SATA is not set
+# CONFIG_PHY_QCOM_IPQ806X_USB is not set
+# CONFIG_PHY_QCOM_M31_USB is not set
+# CONFIG_PHY_QCOM_PCIE2 is not set
+# CONFIG_PHY_QCOM_QMP is not set
+# CONFIG_PHY_QCOM_QUSB2 is not set
+# CONFIG_PHY_QCOM_SNPS_EUSB2 is not set
+# CONFIG_PHY_QCOM_USB_HS_28NM is not set
+# CONFIG_PHY_QCOM_USB_SNPS_FEMTO_V2 is not set
+# CONFIG_PHY_QCOM_USB_SS is not set
+# CONFIG_PHY_QCOM_SGMII_ETH is not set
+CONFIG_PINCTRL=y
+# CONFIG_PINCTRL_APQ8064 is not set
+# CONFIG_PINCTRL_APQ8084 is not set
+CONFIG_PINCTRL_IPQ4019=y
+# CONFIG_PINCTRL_IPQ8064 is not set
+# CONFIG_PINCTRL_MDM9615 is not set
+CONFIG_PINCTRL_MSM=y
+# CONFIG_PINCTRL_MSM8226 is not set
+# CONFIG_PINCTRL_MSM8660 is not set
+# CONFIG_PINCTRL_MSM8909 is not set
+# CONFIG_PINCTRL_MSM8916 is not set
+# CONFIG_PINCTRL_MSM8960 is not set
+# CONFIG_PINCTRL_QCOM_SPMI_PMIC is not set
+# CONFIG_PINCTRL_QCOM_SSBI_PMIC is not set
+# CONFIG_PINCTRL_SDX65 is not set
+CONFIG_PM_OPP=y
+CONFIG_POWER_RESET=y
+CONFIG_POWER_RESET_GPIO_RESTART=y
+CONFIG_POWER_RESET_MSM=y
+CONFIG_POWER_SUPPLY=y
+CONFIG_PPS=y
+CONFIG_PREEMPT_NONE_BUILD=y
+CONFIG_PRINTK_TIME=y
+CONFIG_PTP_1588_CLOCK=y
+CONFIG_PTP_1588_CLOCK_OPTIONAL=y
+CONFIG_QCA807X_PHY=y
+# CONFIG_QCM_DISPCC_2290 is not set
+# CONFIG_QCM_GCC_2290 is not set
+CONFIG_QCOM_A53PLL=y
+# CONFIG_QCOM_ADM is not set
+CONFIG_QCOM_BAM_DMA=y
+# CONFIG_QCOM_COMMAND_DB is not set
+# CONFIG_QCOM_CPR is not set
+# CONFIG_QCOM_EBI2 is not set
+# CONFIG_QCOM_GENI_SE is not set
+# CONFIG_QCOM_GSBI is not set
+# CONFIG_QCOM_HFPLL is not set
+# CONFIG_QCOM_ICC_BWMON is not set
+# CONFIG_QCOM_IOMMU is not set
+CONFIG_QCOM_IPQ4019_ESS_EDMA=y
+# CONFIG_QCOM_LLCC is not set
+# CONFIG_QCOM_OCMEM is not set
+# CONFIG_QCOM_PDC is not set
+# CONFIG_QCOM_RAMP_CTRL is not set
+# CONFIG_QCOM_RPM_MASTER_STATS is not set
+# CONFIG_QCOM_RMTFS_MEM is not set
+# CONFIG_QCOM_RPMH is not set
+CONFIG_QCOM_SCM=y
+# CONFIG_QCOM_SCM_DOWNLOAD_MODE_DEFAULT is not set
+CONFIG_QCOM_SMEM=y
+# CONFIG_QCOM_SMSM is not set
+# CONFIG_QCOM_SOCINFO is not set
+# CONFIG_QCOM_SPM is not set
+# CONFIG_QCOM_STATS is not set
+CONFIG_QCOM_TCSR=y
+# CONFIG_QCOM_TSENS is not set
+CONFIG_QCOM_WDT=y
+# CONFIG_QCS_GCC_404 is not set
+# CONFIG_QCS_Q6SSTOP_404 is not set
+# CONFIG_QCS_TURING_404 is not set
+# CONFIG_QDU_GCC_1000 is not set
+CONFIG_RANDSTRUCT_NONE=y
+CONFIG_RAS=y
+CONFIG_RATIONAL=y
+CONFIG_REGMAP=y
+CONFIG_REGMAP_I2C=y
+CONFIG_REGMAP_MMIO=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+# CONFIG_REGULATOR_QCOM_LABIBB is not set
+# CONFIG_REGULATOR_QCOM_SPMI is not set
+# CONFIG_REGULATOR_QCOM_USB_VBUS is not set
+CONFIG_REGULATOR_VCTRL=y
+CONFIG_REGULATOR_VQMMC_IPQ4019=y
+CONFIG_RESET_CONTROLLER=y
+# CONFIG_RESET_QCOM_AOSS is not set
+# CONFIG_RESET_QCOM_PDC is not set
+CONFIG_RFS_ACCEL=y
+CONFIG_RPS=y
+CONFIG_RTC_CLASS=y
+# CONFIG_RTC_DRV_OPTEE is not set
+CONFIG_RTC_I2C_AND_SPI=y
+CONFIG_RTC_MC146818_LIB=y
+CONFIG_RWSEM_SPIN_ON_OWNER=y
+# CONFIG_SA_GCC_8775P is not set
+# CONFIG_SA_GPUCC_8775P is not set
+# CONFIG_SC_CAMCC_7280 is not set
+# CONFIG_SC_DISPCC_7180 is not set
+# CONFIG_SC_GCC_7180 is not set
+# CONFIG_SC_GCC_8280XP is not set
+# CONFIG_SC_GPUCC_7180 is not set
+# CONFIG_SC_LPASSCC_7280 is not set
+# CONFIG_SC_LPASS_CORECC_7180 is not set
+# CONFIG_SC_LPASS_CORECC_7280 is not set
+# CONFIG_SC_MSS_7180 is not set
+# CONFIG_SC_VIDEOCC_7180 is not set
+# CONFIG_SDM_CAMCC_845 is not set
+# CONFIG_SDM_DISPCC_845 is not set
+# CONFIG_SDM_GCC_660 is not set
+# CONFIG_SDM_GCC_845 is not set
+# CONFIG_SDM_GPUCC_845 is not set
+# CONFIG_SDM_LPASSCC_845 is not set
+# CONFIG_SDM_VIDEOCC_845 is not set
+# CONFIG_SDX_GCC_65 is not set
+# CONFIG_SDX_GCC_75 is not set
+# CONFIG_SM_GCC_7150 is not set
+CONFIG_SERIAL_8250_FSL=y
+CONFIG_SERIAL_MCTRL_GPIO=y
+CONFIG_SERIAL_MSM=y
+CONFIG_SERIAL_MSM_CONSOLE=y
+CONFIG_SGL_ALLOC=y
+CONFIG_SKB_EXTENSIONS=y
+CONFIG_SMP=y
+CONFIG_SMP_ON_UP=y
+# CONFIG_SM_CAMCC_8450 is not set
+# CONFIG_SM_GCC_8150 is not set
+# CONFIG_SM_GCC_8250 is not set
+# CONFIG_SM_GCC_8450 is not set
+# CONFIG_SM_GPUCC_6350 is not set
+# CONFIG_SM_GPUCC_8150 is not set
+# CONFIG_SM_GPUCC_8250 is not set
+# CONFIG_SM_GPUCC_8350 is not set
+# CONFIG_SM_VIDEOCC_8150 is not set
+# CONFIG_SM_VIDEOCC_8250 is not set
+CONFIG_SOCK_RX_QUEUE_MAPPING=y
+CONFIG_SOFTIRQ_ON_OWN_STACK=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_SPI=y
+CONFIG_SPI_BITBANG=y
+CONFIG_SPI_GPIO=y
+CONFIG_SPI_MASTER=y
+CONFIG_SPI_MEM=y
+CONFIG_SPI_QUP=y
+CONFIG_SPMI=y
+# CONFIG_SPMI_HISI3670 is not set
+CONFIG_SPMI_MSM_PMIC_ARB=y
+# CONFIG_SPMI_PMIC_CLKDIV is not set
+CONFIG_SRCU=y
+CONFIG_SWPHY=y
+CONFIG_SWP_EMULATE=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_TEE=y
+CONFIG_THERMAL=y
+CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
+CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
+CONFIG_THERMAL_GOV_STEP_WISE=y
+CONFIG_THERMAL_OF=y
+CONFIG_THREAD_INFO_IN_TASK=y
+CONFIG_TICK_CPU_ACCOUNTING=y
+CONFIG_TIMER_OF=y
+CONFIG_TIMER_PROBE=y
+CONFIG_TREE_RCU=y
+CONFIG_TREE_SRCU=y
+CONFIG_UBIFS_FS=y
+CONFIG_UEVENT_HELPER_PATH=""
+CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
+CONFIG_UNWINDER_ARM=y
+CONFIG_USB=y
+CONFIG_USB_COMMON=y
+CONFIG_USB_SUPPORT=y
+CONFIG_USE_OF=y
+CONFIG_VFP=y
+CONFIG_VFPv3=y
+CONFIG_WATCHDOG_CORE=y
+CONFIG_XPS=y
+CONFIG_XXHASH=y
+CONFIG_XZ_DEC_ARM=y
+CONFIG_XZ_DEC_BCJ=y
+CONFIG_ZBOOT_ROM_BSS=0
+CONFIG_ZBOOT_ROM_TEXT=0
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZSTD_COMMON=y
+CONFIG_ZSTD_COMPRESS=y
+CONFIG_ZSTD_DECOMPRESS=y