Nanako/xx_vv_immortalwrt
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

qualcommax: eap623od-hd-v1: fix phy node and LED config

Browse Source 
The reason phy fails to probe without explicitly overrided phy id is
that the reset timing fails to match. Fix it with proper `reset-delay-us` and
`reset-post-delay-us`.

While at it, change LED settings to match EAP610-Outdoor.

Signed-off-by: Yang Xiwen <forbidden405@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18450
Signed-off-by: Robert Marko <robimarko@gmail.com>
This commit is contained in:
Yang Xiwen 2025-04-10 19:09:42 +08:00 committed by Robert Marko
parent b8eba75146
commit c166cb9661
1 changed files with 11 additions and 12 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

23
target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq6018-eap623od-hd-v1.dts
View File

@ -16,10 +16,10 @@
aliases {
serial0 = &blsp1_uart3;
led-boot = &led_system;
led-failsafe = &led_system;
led-running = &led_system;
led-upgrade = &led_system;
led-boot = &led_sys_green;
led-failsafe = &led_sys_yellow;
led-running = &led_sys_green;
led-upgrade = &led_sys_yellow;
};
chosen {
@ -40,15 +40,15 @@
leds {
compatible = "gpio-leds";
led_system: system {
led_sys_green: led-0 {
color = <LED_COLOR_ID_GREEN>;
function = LED_FUNCTION_STATUS;
gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>;
};
wlan {
led_sys_yellow: led-1 {
color = <LED_COLOR_ID_YELLOW>;
function = LED_FUNCTION_WLAN;
function = LED_FUNCTION_STATUS;
gpios = <&tlmm 32 GPIO_ACTIVE_HIGH>;
};
};
@ -86,15 +86,14 @@
&mdio {
status = "okay";
pinctrl-0 = <&mdio_pins>;
reset-gpios = <&tlmm 77 GPIO_ACTIVE_LOW>;
reset-delay-us = <10000>;
reset-post-delay-us = <50000>;
pinctrl-0 = <&mdio_pins>, <&phy_pins>;
pinctrl-names = "default";
rtl8211f: ethernet-phy@4 {
compatible = "ethernet-phy-id001c.c916";
reg = <4>;
reset-gpios = <&tlmm 77 GPIO_ACTIVE_LOW>;
pinctrl-0 = <&phy_pins>;
pinctrl-names = "default";
realtek,clkout-disable;
realtek,aldps-enable;